Feature #13511: Priority Code Point (PCP) option on interface configuration - pfSense Plus - pfSense bugtracker

Actions

Copy link

Feature #13511

closed

Priority Code Point (PCP) option on interface configuration

Added by Steve Wheeler about 2 years ago. Updated over 1 year ago.

Status:

Resolved

Priority:

Normal

Assignee:

Christian McDonald

Category:

Interfaces

Target version:

23.05

Start date:

04/17/2023

Due date:

% Done:

100%

Estimated time:

3.00 h

Release Notes:

Default

Description

In FreeBSD 13 and newer ifconfig includes the ability to set a PCP value on an interface directly. That allows sending priority only tagged traffic (vlan0).

This works fine in pfSense 2.7/22.11 from the CLI:

[22.11-DEVELOPMENT][admin@4100.stevew.lan]/root: ifconfig igc1 pcp 4
[22.11-DEVELOPMENT][admin@4100.stevew.lan]/root: ifconfig igc1 
igc1: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    description: LAN2
    options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
    ether 90:ec:77:1f:8a:62
    pcp 4
    inet6 fe80::92ec:77ff:fe1f:8a62%igc1 prefixlen 64 scopeid 0x2
    inet 10.14.0.1 netmask 0xffffff00 broadcast 10.14.0.255
    media: Ethernet autoselect
    status: no carrier
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

A field should be added in the GUI and config to allow setting it.

Actions

Copy link

Updated by Patch Public about 2 years ago

An alternative GUI interface to enable setting the VLAN to zero is, to allow the VLAN to be set to zero in the GUI.
As described in https://redmine.pfsense.org/issues/13610

Note it may also still be valuable to be able to directly set the PCP on an interface independent of it's VLAN tag.

Actions

Copy link