pfSense

FYI: I see the October 7th update shows error 404 when attempting to download on pfsense site but is still available on the Pfsense webUI as upgrade path

Reboot into the loader prompt, press 3 at the pfSense/FreeBSD boot menu

Then run the following

load /boot/kernel/kernel
load /boot/kernel/opensolaris.ko
load /boot/kernel/zfs.ko
boot

Christian McDonald wrote in #note-2:

Reboot into the loader prompt, press 3 at the pfSense/FreeBSD boot menu

Then run the following

load /boot/kernel/kernel
load /boot/kernel/opensolaris.ko
load /boot/kernel/zfs.ko
exit

Christian,

Is there a fix pending for this in the next build? I can confirm this happens every time I boot 2.7 on the Oct 7th builds and requires manual intervention to boot.

thanks Christian. I found that this is partially correct. the load commands work but you will need to enter the following afterwards instead of 'exit' as 'exit' is not a recognized command:

reloadbe
autoboot

btw, this is also an issue on the latest October 9th build so I will open another ticket

Also noticed that /boot/loader.conf is almost empty and missing the usual params.. Only has this:

autoboot_delay="3"
net.link.ifqmaxlen="128"

vs prior builds that had this:

kern.cam.boot_delay=10000
kern.ipc.nmbclusters="1000000"
kern.ipc.nmbjumbop="524288"
kern.ipc.nmbjumbo9="524288"
opensolaris_load="YES"
zfs_load="YES"
kern.geom.label.gptid.enable="0"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
opensolaris_load="YES"
zfs_load="YES"
autoboot_delay="3"
net.link.ifqmaxlen="128"