Project

General

Profile

Actions
Copy link

Bug #3822

closed

2.2 boot hangs at "Synchronizing user settings"

Added by Chris Buechler over 10 years ago. Updated about 10 years ago.

Status:
Resolved
Priority:
High
Assignee:
Renato Botelho
Category:
User Manager / Privileges
Target version:
2.2
Start date:
08/21/2014
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.2
Affected Architecture:

Description

I mentioned this issue on IRC roughly 2 weeks ago and someone said it was a known issue being worked on (don't recall the exact details), but it's still happening as of the most recent 2.2 snapshot at the time of this writing. Didn't see a ticket, so opening this.

Under some, but not all circumstances on 2.2, the boot will hang forever at "Synchronizing user settings..."

also mentioned here:
https://forum.pfsense.org/index.php?topic=80247.0

I haven't been able to fully quantify the circumstances under which this happens. I do have a pretty basic config that'll replicate, I'll add that to the projects repo.

Actions
Copy link
 #1

Updated by Chris Buechler over 10 years ago

config file is redmine-3822.xml under projects/ticket-configs/

Actions
Copy link
 #2

Updated by Chris Buechler over 10 years ago

should be easy to replicate with that config file. Appears to happen at every boot. I end up having to ctrl-c out of the boot, manually add a default route (interfaces already configured but not routing at that point), SSH in and comment out local_sync_accounts in /etc/rc.bootup for it to boot.

Actions
Copy link
 #3

Updated by Jim Thompson about 10 years ago

  • Assignee set to Chris Buechler
Actions
Copy link
 #4

Updated by Renato Botelho about 10 years ago

  • Status changed from New to Rejected

I restored that config file twice in different snapshots, could not reproduce. It happened in the past when, due to a already fixed issue, config ended up with an empty entry (<user/> or <group/>) to hang at this exact point during boot, but it's not the case with this config file.

Actions
Copy link
 #5

Updated by Jim Pingle about 10 years ago

  • Status changed from Rejected to New
  • Assignee changed from Chris Buechler to Jim Pingle

There is apparently still a problem here (See https://forum.pfsense.org/index.php?topic=80247.msg444042#msg444042 ), but it's not quite so easy to reproduce.

I have a config sample from a user that I'm trying to test with now to get some more info. Will update/reassign with the results.

Actions
Copy link
 #6

Updated by Jim Pingle about 10 years ago

I still can't reproduce it here but in the config that user sent me, they do have an odd group tag.

        <group>
            <member>2000</member>
            <member>2001</member>
            <member>2003</member>
        </group>
Actions
Copy link
 #7

Updated by Jim Pingle about 10 years ago

  • Status changed from New to Feedback
  • Assignee deleted (Jim Pingle)

I still can't reproduce this no matter how I try to break it. Setting to feedback for now. I posted a message on the forum thread linked above asking for people to retest as well.

Actions
Copy link
 #8

Updated by Chris Buechler about 10 years ago

  • Status changed from Feedback to Resolved

Edit: scratch that, still an issue in some particular edge case I haven't quantified yet.

Actions
Copy link
 #9

Updated by Chris Buechler about 10 years ago

  • Status changed from Resolved to New
  • Assignee set to Chris Buechler

still an issue in some particular edge case I haven't quantified yet.

Actions
Copy link
 #10

Updated by Chris Buechler about 10 years ago

  • Assignee changed from Chris Buechler to Renato Botelho

I updated the above mentioned redmine-3822.xml config file. I can reliably reproduce this hang by just restoring this config to a clean install of the latest 2.2 (full amd64, though I doubt that matters). On the first reboot after the config restore, it's fine. After the first boot of the restored config completes, reboot, and it'll hang on the next and every subsequent boot.

Actions
Copy link
 #11

Updated by Chris Palmer about 10 years ago

I have two machines on the latest 2.2 that hang every first boot but come alive after a re-boot. I can provide configs for both if needed.

Actions
Copy link
 #12

Updated by Chris Palmer about 10 years ago

If I halt the system then they will hang at "Synch user settings" ?? But if I pull the plug they seem to finish the boot. Probably a better description.

Actions
Copy link
 #13

Updated by Chris Buechler about 10 years ago

  • Status changed from New to Feedback

this seems to have been fixed within the last day or two, at least the systems I had where it was replicable no longer have the issue, and a couple others on the forum have reported the same.

Actions
Copy link
 #14

Updated by Chris Buechler about 10 years ago

  • Status changed from Feedback to Resolved

Several upgrades later on systems that used to have this issue, and we're still good. Others on forum have also confirmed.

Actions
Copy link

Also available in: Atom PDF