Project

General

Profile

Actions
Copy link

Bug #6335

closed
CL

Status > IPsec shows both connected and disconnected with Split Connections enabled

Bug #6335: Status > IPsec shows both connected and disconnected with Split Connections enabled

Added by Chris Linstruth over 10 years ago. Updated almost 9 years ago.

Status:
Resolved
Priority:
Low
Assignee:
-
Category:
Web Interface
Target version:
2.4.2
Start date:
05/08/2016
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.3.1
Affected Architecture:

Description

If an IPsec connection has split connections enabled, it shows both connected and disconnected in Status > IPsec. Disabling split connections eliminates display of both connected and disconnected rows but, since the other end is an ASA, breaks the VPN if multi-P2. See screen shot for 172.25.228.226 endpoint.

Appears to be only cosmetic.

Files

Screen Shot 2016-05-08 at 2.06.19 AM.png (157 KB) Screen Shot 2016-05-08 at 2.06.19 AM.png Chris Linstruth, 05/08/2016 04:07 AM

CL Updated by Chris Linstruth over 10 years ago Actions
Copy link
 #1

Appears to require a complete stop and restart of strongswan after enabling or disabling split connections to toggle the status display behavior. Or maybe just a manual disconnect/reconnect of the subject SA.

CB Updated by Chris Buechler about 10 years ago Actions
Copy link
 #2

  • Status changed from New to Confirmed

CB Updated by Chris Buechler about 10 years ago Actions
Copy link
 #3

  • Target version changed from 2.3.2 to 2.4.0

JT Updated by Jim Thompson over 9 years ago Actions
Copy link
 #4

  • Assignee set to Renato Botelho

RB Updated by Renato Botelho almost 9 years ago Actions
Copy link
 #5

  • Target version changed from 2.4.0 to 2.4.1

JP Updated by Jim Pingle almost 9 years ago Actions
Copy link
 #6

  • Target version changed from 2.4.1 to 2.4.2

JP Updated by Jim Pingle almost 9 years ago Actions
Copy link
 #7

  • Target version changed from 2.4.2 to 2.4.3

JP Updated by Jim Pingle almost 9 years ago Actions
Copy link
 #8

  • Target version changed from 2.4.3 to 2.4.2

This is apparently also happening with IKEv2. If it turns out to be too much trouble, bump back to 2.4.3

JP Updated by Jim Pingle almost 9 years ago Actions
Copy link
 #9

  • Assignee changed from Renato Botelho to Anonymous

Assigning to sjones since he's been working on other IPsec status issues

Updated by Anonymous almost 9 years ago Actions
Copy link
 #10

  • Status changed from Confirmed to Resolved
Actions
Copy link

Also available in: Atom