Bug #7625
closed
When creating IPv6 firewall rule for single host, netmask improperly displays
100%
Description
When creating a firewall rule (I tested with a pass rule on WAN):
Address Family: IPv6
Source: Single Host or alias
Enter an IPv6 adress
Firefox and Chrome on Mac: displays /32 in source netmask
Safari on Mac: displays /128 in source netmask
Any change to Destination address hides source netmask in all tested cases.
This appears to be only cosmetic.
Causing confusion for at least one user: https://forum.pfsense.org/index.php?topic=131675.0
Updated by Renato Botelho over 6 years ago
- Status changed from New to Feedback
- % Done changed from 0 to 100
Applied in changeset 036b32b57e88464d66e6e01e640178f68cf882ec.
Updated by Dan Lundqvist over 6 years ago
I have now updated to latest build but unfortunatly it still does not work. (2.4.0-BETA (amd64) built on Wed Aug 02 06:04:56 CDT 2017)
1. I create a IPv6 rule, select Src.SingleHotstOrAlias and enter a IPv6 address and press tab. It then fills in a /128 mask.
So far so good.
2. I then Select anything in the destination field like "SingleHotstOrAlias" and it still empties the Src.mask field to blank. Same as described in bug.
3. I then tried to empty the Dst. to Any and also empty the IPv6 address in Src and also even try to put back Src to "Any"
But it doesn't matter what you do the mask will be blank all the time even if you enter a new IPv6 address.
I even tried to do just #1 and then press SAVE without changing Dst and when you edit the rule Src.mask is still blank.
//Dan Lundqvist
Stockholm, Sweden
Updated by Renato Botelho over 6 years ago
- Status changed from Feedback to Assigned
Updated by Renato Botelho over 6 years ago
- Assignee changed from Renato Botelho to Anonymous
Steve will handle that
Updated by Anonymous over 6 years ago
- Status changed from Assigned to Feedback
Fixed JavaScript in firewall_rules_edit.php and pfSense.js
Updated by Pi Ba over 6 years ago
Looks like it broke loading /interfaces.php?if=lan with static ip masks for both IPv4 and IPv6 now defaulting to 32 and 128. Instead of previously saved values.
Updated by Jim Pingle over 6 years ago
- Status changed from Feedback to Confirmed
- Priority changed from Low to High
This has caused a regression, see #7777
In IPsec P2, and presumably other places, a stored IPv4 CIDR mask of /24 is jumping to /32 when an entry is edited, rather than using the correct mask.
Updated by Jim Pingle over 6 years ago
It is also happening for Virtual IP addresses and their CIDR masks
Updated by Anonymous over 6 years ago
- Status changed from Confirmed to Feedback
Applied in changeset a7c47d85270fcf8c784e6af61ea2fd09f9d4f5ac.
Updated by Jim Pingle over 6 years ago
That last change has corrected the behavior of CIDR selection for saved IPsec and VIPs, thanks!
Updated by Jim Pingle over 6 years ago
- Status changed from Feedback to Resolved
Looks OK all-around now.