Actions
Bug #5260
closed
2.3-ALPHA console option 13 upgrade hangs after installing the upgrade
Start date:
10/06/2015
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.3
Affected Architecture:
Description
My test system is an APU using the 4GB nanoBSD serial image on an 8GB SD card.
I have done 2 upgrades so far. For the first one I had no serial console cable connected so was unable to see all that really happened.
For the upgrade I just did, I recorded all the serial console output.
It successfully:
1) Finds the things that need upgrading.
2) Downloads them
3) Reboots and starts the installation steps, which seem to complete fine.
4) Then:
External config loader 1.0 is now starting...
Launching the init system...pid 21 (sh), uid 0: exited on signal 11 (core dumped)
At that point it hangs - I left it for 30 minutes like that.
Power-cycle it and it boots fine with all the upgraded software, as far as I can see.
Files
Updated by 
Updated by 
Updated by 
Updated by
Actions