pfSense

Do not allow to add nested alias containing FQDNs when current alias is used on a static route, ticket #2941

Make sure an alias is not used by a static route before delete, ticket #2941

Fix check for existing IP Address in DHCP mapping

Even the Error message says: "This Hostname, IP or MAC address already exists." the IP Address was not checked if it already was given to a client as static mapped
Conflicts:
usr/local/www/services_dhcp_edit.php

Warn user that change will not take effect immediately

Do not call -f twice (thx eri)

Fix whitespaces

Improvements on Diagnostics -> Routes

• Add filter expression
• Add limit number of rows option (default 100)
• Run one netstat for each section
• Load netstat result using ajax after page is loaded

Show apinger as a service when active, and display its status on gateway-related pages.

Add the MAC manufacturer code to the CP status page

Add the MAC manufacturer code to the DHCPv6 leases view.

Add the MAC manufacturer code to the NDP table.

fix text - add space between sentences. This got lost in another commit

Clarify that the graph is for mbuf clusters

Update system.php

fix text - s/by/be
Conflicts:
usr/local/www/system.php

typos

Merge pull request #763 from N0YB/patch-9

Update diag_logs_filter.php

Merge pull request #759 from N0YB/patch-5

Update system_advanced_admin.php

Merge pull request #760 from N0YB/patch-6

Update system.php

Merge pull request #761 from N0YB/patch-7

Update interfaces.php

Merge pull request #762 from N0YB/patch-8

Update services_dyndns_edit.php

Update diag_logs_settings.php

fix text - s/rulessets/rule sets

Update diag_logs_filter.php

fix typo - s/expression/expression

Update services_dyndns_edit.php

fix typo - s/sperate/separate

Update interfaces.php

fix text - Capitalize sentence. s/this/This

Update system.php

fix text - add space between sentences.

Update system_advanced_admin.php

fix typo s/Communcations/Communications/

fix text - s/occured/occurred/

Revert "Remove unecessary variable"

Variable is used below

This reverts commit 010639a89ba4ebdd1267274e8c0dcfc6d474ce03.

Show friendly interface name, fixes #3095

tighten overly broad regexes for SMART monitoring

Catch adaX here too

Check if hostname is valid, it fixes #3117

Use full path

Show full process arguments in system activity output, but limit output to 105 chars wide so it does not spill out of its background area.

Make NAT port forward data entry error message match GUI text

The GUI has "Redirect target IP" and "Redirect target port". But the error message when validating "Redirect target port" refers to it as "local port". I was just confused when I forgot to type in the "Redirect target port", the error told me I had to enter a valid local port. I looked down the GUI page for "local port" and it is not there.

Fix #3113, fix multiple english spell errors s/seperet/separat/

Update services_dyndns_edit.php

Setting $pconfig['ttl'] to isset result causes the ttl value to be set to 1 (true) upon subsequent saves.

fix typos

Also catch adaX Fixes #3112

revert part of commit 4cfcbd3 - removes blank option on firewall log widget drop down menu

Mark input_errors as reference at do_input_validation declaration, it fixes #3108

Fix #3103, cleanup ports fields when protocol changes

Close td

Allow advanced options state-related parameters to be used for TCP, UDP and ICMP

Allows the state-related parameters to be specified for UDP and ICMP as well as TCP. Discussed in forum http://forum.pfsense.org/index.php/topic,64653.0.html

Implement an option to allow using the IPv4 connectivity interface for sending the dhcpv6 information. Usually useful for ppp[oe] type links and some ISP

Fix error in 2.1 branch dhcp6prefixonly implementation

The Main branch code was in the correct place, but the version applied to 2.1 branch had this code in the wrong place.

Fixes #3100. Fix spell and spaces issues

Validate firewall rule advanced options requirements

Checks that the user has selected a TCP Pass rule etc when using the state-related advanced options. Validates as per the checks that are applied in filter.inc when generating the actual pf rules.
Forum discussion: http://forum.pfsense.org/index.php/topic,64653.15.html...

When adding Port or URL alias default the alias type (2.1 version)

When viewing the Port or URL aliases tab, and pressing "+" (add), make the default alias type match the Port or URL tab from which the user pressed "+".
This is a version for the 2.1 branch.

Fix editing saving dhcp6prefixonly state

Reported in redmine #3097 and forum http://forum.pfsense.org/index.php/topic,64483.msg350255.html#msg350255

3652 days worth is a too much. Scale it back to more reasonable 1.25 x maximum used data (2284 days).

Use default RRD colors that are a little more visually distinct. Add some better comments/labels to make it easier for people to help customize and tweak the colors. Suggestions welcome.

Disable the BEAST protection by default because the GUI will break if you use this and have a Hifn card installed. Others may break similarly. Change it into a checkbox option, off by default, and automatically disable it if a conflicting card has been detected.

This is not a percentage

Remove remaining hardcoded theme names

Add LDAP server options to control UTF8-encoding of parameters. Fixes #2227. While I'm here, add a checkbox to prevent the stripping of @ from the LDAP username if the user wants the full name transmitted.

Some more tweaks to state and mbuf update/output on dashboard widget.

Use some easier to distinguish colors for mbuf graph

Add a meter for states, too

Fixup mbuf stats function

Make mbufs update via ajax

Fix ids

Fix an occasional "blank" cpu freq printing that shouldn't happen.

Make mbuf usage a meter, too.

Show totals for memory, swap, and disk usage.

Add an RRD graph for MBUFs under system. Tweaks welcome.

If an account has SSH keys, show them, don't show the checkbox to add keys. Fixes #2729

Substitute Product name in privileges

properly handle custom-v6 dyndns entries in web interface

Change separator as per JimP's request.

Add front-end support for dyndns AAAA updates

Add support for protocol 41 in rules. Fixes #3007.

Add independent logging choices to disable logging of bogon network rules and private network rules. Add upgrade code to obey the existing behavior for users (if default block logging was disabled, so is bogon/private rule blocking). Also add a checkbox to disable the lighttpd log for people who don't want their system log spammed by lighty.

Fix the "use ICMP" function for traceroute.

Fix #3079, add a section for DHCPv6 Server backup

fix description

touch up text

Make dashboard update check respect nanobsd-vga, probably fixes #3078

Correct month, quarter (3 months), and 4 year RRD graphs length.

Longest possible month is 31 days, not 32.
Longest possible quarter (3 months) is 92 days (30+31+31), not 93 (31+31+31).
4 Years is 1461 days (365 x 4 + 1), not 1464 (366 x 4). Except about once every century or so when leap year is skipped 4 years is then 1460 days. But that is not going to happen again for a very long time. Unfortunately pfSense, nor anyone alive today will probably still be alive by then.

Remove unecessary variable

Fix #2962, allow to remove VIP if gateway IP is on the interface's subnet

Remove unecessary var initialization

Fix a small issue when disable a boolean option and save, it shows option as enabled

Fix whitespaces

Fix whitespaces

Process zipped aliases list

Remove useless code

Update interfaces.php

Remove errant double quote.

Add server IP column and cached IP display to RFC2136 host list.

Add option to RFC2136 to find/use the public IP if the interface IP is private. (Off by default)

Fix double click row to edit for rfc2136

Add cached IP support to RFC2136, add GUI button to force update for single host.

Correct variable used to delete symlinks and files delete from CP filemanager. Reported-by: http://forum.pfsense.org/index.php/topic,64016.0/topicseen.html. While here reduce some uneeded extra operations

Add the interface's descr after the pool name.

Merge pull request #680 from Klaws--/RELENG_2_1

Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP

Add a checkbox that can be used to request only a IPv6 prefix without a IPv6 address. Some ISPs DHCP6 servers will fail the request if both are requested and only a Prefix is allowed.

Adjust archives array values to match sizes for average calculation.

Archive start is “now” minus archive length. Not “end” minus archive length. Sometimes "end" is not "now".

Merge pull request #675 from N0YB/RRD_Specify_RRA_Resolution

RRD Specify RRA and Resolution

Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP

Also removed the ranges 1-64 and 0x04-0xfc, which never ever have worked as expected (the kernel code does not recognize ranges nor provide any support for them - just the first number was taken as a single value, NOT shifted into the correct range for DSCP values)....