Activity
From 09/17/2023 to 10/16/2023
10/16/2023
-
03:19 PM Regression #14883 (Not a Bug): Package Manager in 23.05.1 broken
- The package manager servers are the same for Plus on Netgate and non-Netgate hardware for amd64 systems. There do not...
-
03:10 PM Regression #14883 (Not a Bug): Package Manager in 23.05.1 broken
- Hello,
Package Manager on 23.05.1 is not showing Available packages now, as if the repo is offline or something. ... -
03:09 PM Regression #14180: ConnectX-4 LX MCX4121A-ACAT - VT-d passthrough of both ports, virtualized pfSense fails to boot due to mlx5 driver errors
- Hi, thanks for looking into it.
My setup was already EFI-based. I've long since abandoned the Mellanox card and am...
10/15/2023
-
06:52 AM Bug #14879: Disabling DNS Rebinding Checks deletes private domains from unbound config
- According to johnpoz in the linked forum thread, DNSSEC validation fails. This would explain why it is not working an...
-
03:01 AM Regression #14180: ConnectX-4 LX MCX4121A-ACAT - VT-d passthrough of both ports, virtualized pfSense fails to boot due to mlx5 driver errors
- see if it makes any difference booting EFI with your setup - https://docs.netgate.com/pfsense/en/latest/recipes/virtu...
10/14/2023
-
- This will make Domain Overrides not work anymore, at least with split DNS.
More Details are described here: https:/...
10/13/2023
-
-
05:55 PM Bug #14478: Ethernet rules using ``(self)`` as a source or destination make the ruleset fail to load
- tested on:
Version 23.09-BETA (amd64)
built on Fri Oct 13 6:00:00 UTC 2023
FreeBSD 14.0-CURRENT
this version has ...
10/12/2023
-
01:09 PM Bug #14837: some services show can't start
- Wireguard is connected, but it shows that the service has not been started.
10/11/2023
-
12:33 AM Bug #14862 (New): netstat nexthop queries fail on an arm32
- Using the -o or -O switches with netstat to get nexthop data fails or shows bad data on arm32 devices....
10/09/2023
-
- I read some information and experience and tried it. My point is not to rule out any possibility, but to face the pro...
-
- No, according to research, it is caused by your parameter configuration and PHP code design issues. My hardware resou...
-
- Those parameters are already adjusted based on system memory. There have been no other similar reports of problems wi...
-
- There isn't nearly enough detail here to tell what is happening on your system in your environment, but it's not a ge...
10/08/2023
-
- I initially found the reason. The parameters in php-fpm.conf are incorrect and cannot adapt to high load conditions.
...
10/06/2023
-
- The system cannot complete the restart process.
The system has been stuck and cannot complete the restart process, b... -
- Regarding PHP-FPM, webgui crashes and freezes when the system load is relatively heavy, such as when there are a larg...
10/05/2023
-
- The fix for this was merged last week.
-
- /firewall_virtual_ip.php: The command '/sbin/ifconfig tun_wg0 inet6 'fe80::981f:60ff:fee9:56d3' -alias' returned exit...
-
- wireguard up online, but wg service show down.
10/04/2023
-
- I can't reproduce anything like this. UPnP starts fine here, for example. Please post on the forum and diagnose these...
-
- 23.09-DEVELOPMENT (amd64)
built on Wed Oct 4 17:15:00 CST 2023
FreeBSD 14.0-CURRENT
status_services.php
wireg... -
- Still happens with one of the two VPNs
23.09-DEVELOPMENT (amd64)
built on Tue Oct 3 14:00:00 CST 2023 -
- The expected order is the order shown on https://docs.netgate.com/pfsense/en/latest/solutions/netgate-6100/io-ports.h...
-
10:36 AM Feature #14835: Nics name netgate 6100
- Or is this the norm for this box?
https://docs.netgate.com/pfsense/en/latest/solutions/netgate-6100/io-ports.html -
- Hello. I think that the WAN interfaces on the netgate 6100 *box* are now called incorrectly.
Like now:
WAN1 = ix3, ...
10/03/2023
-
11:03 AM Bug #14824: OpenVPN instance on IPv6 PPPoE interface does not always start automatically
- Tested on:
23.01-RELEASE (amd64)
built on Fri Feb 10 20:06:33 UTC 2023
FreeBSD 14.0-CURRENT
(all official pat...
10/02/2023
-
05:01 PM Regression #14828: QAT is not being used by some daemons
- I still see demonstrable difference between 23.05 and 23.09 dev with QAT. QAT is active on 23.05 for all on-device e...
-
- Waiting on more info from the OP on the forum since it's not clear there is actually a problem yet. The items we expe...
-
- QAT isn't broken, it is working with IPsec and OpenVPN DCO which is expected since they are in the kernel.
It isn't ... -
- QAT not working. Issue identified on Netgate 6100 and subsequently confirmed on a 4100 unit. Issue confined to 23.0...
-
- log after rebooting the device (everything ok):
Oct 2 16:52:53 openvpn 39792 Initialization Sequence Completed
... -
- Probably the same problem that I extinguished (from version 23.05.1)
https://redmine.pfsense.org/issues/14811#chan...
10/01/2023
-
02:24 AM Bug #14824: OpenVPN instance on IPv6 PPPoE interface does not always start automatically
- This sounds like an issue with ordering and PPPoE. Likely the PPPoE connection isn't started prior to the OpenVPN Cl...
09/30/2023
-
- getting unknown oid in the latest build 23.09.a.20230929.2350
-
- you can use the following to disable the blue blinking indicator on 4100/6100/8200 systems...
-
- This problem occurs again
-
- I just updated to this version and this problem did not occur. I will continue to observe and report in the future.
... -
- my WAN is pppoe.
-
06:55 AM Bug #14824: OpenVPN instance on IPv6 PPPoE interface does not always start automatically
- Can't reproduce it, tunnel on IPv6 only interface starts immediately after a reboot.
tested on ... -
- tested on
23.09-DEVELOPMENT (amd64)
built on Fri Sep 29 21:07:00 CST 2023
FreeBSD 14.0-CURRENT -
- openvpn use ipv6 WAN, When pfsense restarts the system, openvpn ipv6 can't autostart. It must be started manually. Af...
09/29/2023
-
- Yes but the settings on that traffic graph page can be configured in numerous different ways and how you have that pa...
-
12:56 PM Bug #14818: StatusTraffic Graph In/Out traffic misplaced in Graph but correct in text table
- It is a super simple configuration.
One public WAN, one local LAN, only one local client IP
Just look on the pict... -
- Can you show more of the screenshot there to see all of your current settings when that behavior is observed?
Also... -
- StatusTraffic Graph In/Out traffic misplaced in Graph but correct in text table
See attached picture
09/28/2023
-
09:50 PM Bug #14515: Ethernet rule Action field hint text lists "reject" option which is not compatible with Ethernet rules
- Thank you!!
-
- This is most likely either something in your settings there (such as the 'filter' option) or it could be that some of...
-
01:48 PM Bug #14817 (Not a Bug): Traffic Graph reporting high Util - no talker found
- I have a Unifi VLAN and a Wifi VLAN that are on the same interface - trunked. I wanted to provide context to how the ...
09/27/2023
-
- The certificate is fine, it's self-signed and valid when properly trusted by the OS. Something on your local system i...
-
11:20 AM Bug #14812 (Not a Bug): Invalid https certificate https://pfsense-plus-pkg00.atx.netgate.com
- Please update certificates on this web page, it is invalid now.
https://pfsense-plus-pkg00.atx.netgate.com
Expo...
09/26/2023
-
09:09 PM Bug #14478 (Pull Request Review): Ethernet rules using ``(self)`` as a source or destination make the ruleset fail to load
- From what I can tell, @(self)@ is the only "dynamic host" we use in pfSense, everything else is a "static host". Fire...
09/25/2023
-
- I hope more ICMP type refinements can be added to the firewall options.
For example, add Type 2 - Packet Too Big an...
09/20/2023
-
- Already fixed in the repo: #14790#note-4
-
Fatal error: Uncaught TypeError: array_get_path(): Argument #1 ($arr) must be of type array, null given, called...
09/18/2023
-
07:28 AM Feature #14789: Captive Portal - Add OTP authentication option to the portal's authentication options
- Pull request created: https://github.com/pfsense/pfsense/pull/4649
-
- I have created a small modification to the captive portal pages so it would be possible to use an OTP as login option...
09/17/2023
-
- unsuccessfully attempted reproducing with my 3100 and graylog - will monitor further to see if anything occurs
Also available in: Atom