pfSense » pfSense Packages

02/02/2016

11:47 PM Bug #4420 (Resolved): warning: bad command startup -- throttling

Chris Buechler

11:45 PM Bug #4376 (Closed): Squid3 Squidguard3 Stability Problems

Chris Buechler

11:27 PM Bug #4608 (Resolved): squidGuard & pfsense RAM disk compatible

Chris Buechler

11:27 PM Bug #4615 (Resolved): /var/logs/c-icap/server.log & access.log growing without being rotated

Chris Buechler

10:53 PM Bug #5727 (Resolved): tftp service - errors when stopping service

Chris Buechler

10:44 PM Bug #4612 (Resolved): syslog-ng creates logrotate cron job, but logrotate doesn't exist

Chris Buechler

08:28 PM Bug #3516 (Needs Patch): pfflowd segfaults when netflow version is set to version 9

pfflowd is dead (upstream abandoned, doesn't work on 2.2.x and newer) Chris Buechler

01:40 AM Bug #5117 (Resolved): HAVP fails to start after claimed to be successfull install 2.2.4

Chris Buechler

02/01/2016

11:42 PM Feature #2197 (Closed): WebDav gateway

Chris Buechler

11:21 PM Feature #1435 (Needs Patch): Squid - add syslog capability

Chris Buechler

11:09 PM Bug #4885 (Resolved): squid3 chmod error at boot after reinstall post-upgrade

Chris Buechler

11:09 PM Bug #5154 (Resolved): squid3 - min/max_object_size directives out of order in config and not applied to cache_dir

Chris Buechler

11:07 PM Bug #4085 (Resolved): Check_mk agent configuration: 'Listen Port' is required, contrary to description

Chris Buechler

04:49 PM Bug #5169 (Resolved): /etc/rc.haproxy_ocsp.sh emits an extra blank line, causing cron to email that output

Chris Buechler

04:48 PM Bug #1561 (Resolved): HTTP traffic dies after disabling HAVP

Chris Buechler

04:48 PM Bug #5157 (Resolved): HAVP 1.09 - Log tabs give 404, daemon mode doesn't work

Chris Buechler

04:32 PM Bug #4391 (Resolved): Status | Services | nrpe2 | restart does not restart nrpe

Chris Buechler

04:31 PM Bug #4256 (Closed): Squid3 using 100% CPU after install/reboot

Chris Buechler

04:30 PM Bug #4197 (Resolved): squid 3.4 anti-virus feature not working

Chris Buechler

04:29 PM Feature #3511 (Closed): IGMP Proxy - its own tab under system logs

Chris Buechler

04:17 PM Bug #4663 (Resolved): pfsense 2.2.2-RELEASE + squid3 + squidGuard = Breaking squid.conf when using c-icap

Chris Buechler

04:16 PM Bug #4460 (Closed): Upgrade to HAVP v1.05 forever displays "Antivirus Server ( ) Stopped"

HAVP has been deprecated Chris Buechler

04:15 PM Bug #3729 (Resolved): Bacula-client Services not running

Chris Buechler

04:15 PM Feature #3608 (Rejected): new package: puppet

Chris Buechler

04:14 PM Bug #2992 (Duplicate): Boot problem after upgrade

duplicate of #3986 Chris Buechler

04:12 PM Bug #3360 (Resolved): Apache reverse proxy-dev leaves / out of Backend Path

Chris Buechler

04:11 PM Bug #3533 (Closed): bind package restores outdated config.xml

Chris Buechler

04:10 PM Bug #3905 (Closed): Upgrade from 2.1.3 to 2.1.5 broken Net/SNMP.pm path

Chris Buechler

01/31/2016

12:00 PM Feature #4489: Add Varnish 4 Plugin

Varnish 4.1 now supports the PROXY protocol from an upstream server.
This replaces the need for accepting X-Forward-... Joshua Ruehlig

01/29/2016

09:17 PM Feature #5434: Let's Encrypt pfSense support

Hi, I'm also hoping for a LetsEncrypt client package for pfSense.
It seems to me that if a dynamic DNS service mat... Brian Buchanan

01/27/2016

03:32 PM Todo #5574 (Resolved): Convert the pfSense package HAProxy (net/pfSense-pkg-haproxy) to Bootstrap

Merged the PR and it's built and up now. Installed, looks good here. Problems unrelated to the Bootstrap conversion s... Jim Pingle

01:19 PM Todo #5574 (Assigned): Convert the pfSense package HAProxy (net/pfSense-pkg-haproxy) to Bootstrap

Jim Thompson

02:07 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Pullrequest is 'pending' for that one.. https://github.com/pfsense/pfsense/pull/2499 Pi Ba

08:38 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Bring that up on the forum or a new ticket, it's not related to the Bootstrap conversion, but other work done on the ... Jim Pingle

05:37 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Hi there,
from any of the main tabbed haproxy pages IE /haproxy/haproxy_global.php
the 'restart service' link in ... wolf noble

01:20 PM Todo #5577 (Assigned): Convert the pfSense package Lightsquid (www/pfSense-pkg-Lightsquid) to Bootstrap

Jim Thompson

01:19 PM Todo #5568 (Assigned): Convert Package PHP GUI Files to Bootstrap

Jim Thompson

01:19 PM Todo #5585 (Assigned): Convert the pfSense package Snort (security/pfSense-pkg-snort) to Bootstrap

Jim Thompson

01:18 PM Todo #5588 (Assigned): Convert the pfSense package Suricata (security/pfSense-pkg-suricata) to Bootstrap

Jim Thompson

04:32 AM Bug #5821: Asterisk - shared object libperl.so not found

+Remark Addon:+
If 'res_snmp.so' isn't really needed, uncomment the following line in /usr/local/pkg/asterisk.inc:... Willy Tenner

04:14 AM Bug #5821 (Closed): Asterisk - shared object libperl.so not found

+Problem:+
During startup of Asterisk a module (res_snmp.so) cannot be loaded, because the shared object "libperl.... Willy Tenner

01/26/2016

03:07 PM Bug #5318: Upgrade FreeRadius to 2.2.9

The FreeRADIUS package on 2.3 is working and is using FreeRADIUS 2.2.9 for those that need the fix and don't want to ... Jim Pingle

09:40 AM Todo #5580 (Resolved): Convert the pfSense package pfBlockerNG (net/pfSense-pkg-pfBlockerNG) to Bootstrap

From a Bootstrap-perspective this appears to be fine now. I clicked around most all of the pages and interacted and e... Jim Pingle

03:33 AM Todo #5580: Convert the pfSense package pfBlockerNG (net/pfSense-pkg-pfBlockerNG) to Bootstrap

assigned to Pingle so it will get closed. Jim Thompson

09:09 AM Todo #5574: Convert the pfSense package HAProxy (net/pfSense-pkg-haproxy) to Bootstrap

It's been synced over but needs to catch up to changes with print_info_box* in base, PiBa is working on another PR fo... Jim Pingle

06:56 AM Bug #5809 (Resolved): Typo in siproxd config file prevents correct loading of plugins

Works Jim Pingle

01/25/2016

05:40 PM Bug #4553 (Resolved): BIND IPv6 Reverse Zone problem

thanks Chris Buechler

05:45 AM Bug #4553: BIND IPv6 Reverse Zone problem

This change was finally merged in https://github.com/pfsense/pfsense-packages/commit/1bab1a2665febb7a9f69adccacda1e7d... Joze Mlakar

07:50 AM Bug #5809 (Feedback): Typo in siproxd config file prevents correct loading of plugins

Applied in changeset pfsense-packages:commit:109b57fe3a51d65908582f825a398690a03ebd92. Jim Pingle

01/24/2016

11:41 AM Bug #5809 (Resolved): Typo in siproxd config file prevents correct loading of plugins

+Problem:+
Typo in siproxd config file prevents correct loading of plugins
+Description:+
Using siproxd packag... Willy Tenner

01/22/2016

02:22 PM Todo #5574: Convert the pfSense package HAProxy (net/pfSense-pkg-haproxy) to Bootstrap

Assigning to me for the time being. PiBa-NL is going to sync this over from haproxy-devel which should allow it to be... Jim Pingle

02:13 PM Todo #5575 (Resolved): Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

This one looks ok from a Bootstrap point of view. PiBa is going to sync it over on top of the main haproxy package at... Jim Pingle

01:57 PM Todo #5576 (Resolved): Convert the pfSense package LADVD (net/pfSense-pkg-LADVD) to Bootstrap

Looks good after my last push, confirmed working on two boxes. Jim Pingle

12:31 PM Todo #5570 (Resolved): Convert the pfSense package Backup (sysutils/pfSense-pkg-Backup) to Bootstrap

Tested on multiple boxes, I can't break it, looks good. Could use some better styling in places but it's functional. Jim Pingle

12:29 PM Todo #5584 (Resolved): Convert the pfSense package siproxd (net/pfSense-pkg-siproxd) to Bootstrap

Looks good as far as I've been able to test. If someone else hits a problem, it can be reopened with more detail. Jim Pingle

12:15 PM Todo #5572 (Resolved): Convert the pfSense package FreeRADIUS2 (net/pfSense-pkg-freeradius2) to Bootstrap

I've had it running and working fine for a week now. If there are other non-Bootstrap related issues (e.g. not workin... Jim Pingle

12:13 PM Todo #5579 (Resolved): Convert the pfSense package OpenBGPD (net/pfSense-pkg-OpenBGPD) to Bootstrap

I managed to get a working setup on two separate 2.3 boxes talking to each other and pushed some more fixes a couple ... Jim Pingle

12:11 PM Todo #5586 (Resolved): Convert the pfSense package Squid (www/pfSense-pkg-squid) to Bootstrap

The Bootstrap-related pieces are fine, and the primary features of the package function when properly configured.
... Jim Pingle

12:11 PM Todo #5587 (Resolved): Convert the pfSense package SquidGuard (www/pfSense-pkg-squidGuard) to Bootstrap

The Bootstrap-related pieces are fine, and the package does function when properly configured.
If there are other ... Jim Pingle

01/18/2016

09:13 PM Bug #5780: phpservice.inc - variables between EOF not escaped.

It will be easy to review if you edit the source code at https://github.com/pfsense/pfsense-packages/blob/master/conf... Phillip Davis

01:01 PM Bug #5780 (Closed): phpservice.inc - variables between EOF not escaped.

make a long term short ..
37: - $tmp = <<<EOF
37: + $tmp = '
44: - filename = "/tmp/phpmonitor.pid";
44: + file... Christian Lackstaetter

12:30 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

@Wolf Noble, if you've got some time, please take another look at the current 0.39 package, it should have all points... Pi Ba

07:33 AM Todo #5577: Convert the pfSense package Lightsquid (www/pfSense-pkg-Lightsquid) to Bootstrap

Assigning to cmb since he's the nginx guru. Looks like we may need to setup a fastcgi wrapper of sorts, similar to wh... Jim Pingle

01/16/2016

02:07 PM Todo #5577: Convert the pfSense package Lightsquid (www/pfSense-pkg-Lightsquid) to Bootstrap

I converted some of the GUI parts to Bootstrap, it seems broken in other ways, however. It requires CGI support for p... Jim Pingle

01:14 PM Todo #5587 (Feedback): Convert the pfSense package SquidGuard (www/pfSense-pkg-squidGuard) to Bootstrap

Jim Pingle

01:14 PM Todo #5587: Convert the pfSense package SquidGuard (www/pfSense-pkg-squidGuard) to Bootstrap

I converted the squidGuard blacklist and log page to Bootstrap and make a few other relevant adjustments. Still could... Jim Pingle

01:38 AM Bug #5749 (Feedback): OpenVPN Export Certs with password, password doesn't open .pk12 container.

it works for me. Viscosity prompts for the p12 key after the user credentials, and accepts it as entered in the expor... Chris Buechler

01/15/2016

06:47 PM Todo #5586 (Feedback): Convert the pfSense package Squid (www/pfSense-pkg-squid) to Bootstrap

I converted the squid monitor page to Bootstrap (others are all XML), will be up for testing shortly. Jim Pingle

02:25 PM Todo #5579 (Feedback): Convert the pfSense package OpenBGPD (net/pfSense-pkg-OpenBGPD) to Bootstrap

I converted the Raw Config and Status tabs to Bootstrap, the other config tabs were XML and were already OK.
This ... Jim Pingle

01:33 PM Todo #5576 (Feedback): Convert the pfSense package LADVD (net/pfSense-pkg-LADVD) to Bootstrap

Converted the status page to Bootstrap, rest of the package was XML and didn't need adjusting. Looks good now. New ve... Jim Pingle

01:12 PM Todo #5572 (Feedback): Convert the pfSense package FreeRADIUS2 (net/pfSense-pkg-freeradius2) to Bootstrap

Most of the package is XML. I converted the config viewer to Bootstrap, which was the only PHP-based GUI page. Packag... Jim Pingle

12:20 PM Todo #5581 (Resolved): Convert the pfSense package Quagga OSPF (net/pfSense-pkg-Quagga_OSPF) to Bootstrap

Looks good to me, only the status page needed converting and it renders fine here. Jim Pingle

12:14 PM Todo #5573 (Resolved): Convert the pfSense package gwled (sysutils/pfSense-pkg-gwled) to Bootstrap

Nothing to convert, only .php file was a script and not a GUI component. Jim Pingle

11:49 AM Todo #5584 (Feedback): Convert the pfSense package siproxd (net/pfSense-pkg-siproxd) to Bootstrap

Only the status page needed conversion. I pushed an update, once version 1.1 shows up to install it is ready for test... Jim Pingle

11:23 AM Todo #5570 (Feedback): Convert the pfSense package Backup (sysutils/pfSense-pkg-Backup) to Bootstrap

Pushed an updated version. Once 0.3 shows up for installation it is ready for testing. Jim Pingle

01/14/2016

03:20 PM Bug #5468 (Closed): iperf service won't shutdown

Anonymous

03:19 PM Bug #5685 (Closed): Can't (re)install Asterisk

Anonymous

02:00 PM Todo #5585: Convert the pfSense package Snort (security/pfSense-pkg-snort) to Bootstrap

Bill Meeks is spear heading this one, but I am working with him on it as I do Suricata. Jared Dillard

07:55 AM Feature #5769 (Rejected): Can this code be added to system patch package?

1. No. Auto-fetching is a bad idea, especially if it stomps existing content. The contents of the remote patch could ... Jim Pingle

12:17 AM Feature #5769 (Rejected): Can this code be added to system patch package?

The system patch package has a (slight) inconsistent treatment which happens invisibly. When the package is installed... Stilez y

01/12/2016

12:35 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

As for the xmlrpcsync, ill try and see if can make that happen 'asynchronously'. So the user does not need to wait fo... Pi Ba

12:29 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

The quote's are not supposed to be part of the text put into the field.. Maybe i should just remove them completely. ... Pi Ba

04:35 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

I entered a custom HTTP string in the Http check version textarea of the Health Checking section of the Edit HAProxy ... wolf noble

04:30 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

When you click 'apply changes' on a carp setup, it can often take some time for the changes to propagate.
system l... wolf noble

09:24 AM Bug #5763 (Resolved): OpenVPN client export extraction failed - Unsupported Method

Works for me too on another box. Closing it out. Jim Pingle

09:20 AM Bug #5763: OpenVPN client export extraction failed - Unsupported Method

work fine, it's ok Francisco Cavalcante

08:33 AM Bug #5763 (Feedback): OpenVPN client export extraction failed - Unsupported Method

Updated the export package to 1.3.6, which now bundled OpenVPN 2.3.10, and I switched to a different SFX module which... Jim Pingle

07:26 AM Bug #5763 (Confirmed): OpenVPN client export extraction failed - Unsupported Method

Hmm, I'm seeing this now also, but the archive doesn't use rar. It uses 7z format, LZMA2 BCJ method. No rar. That can... Jim Pingle

07:14 AM Bug #5763 (Resolved): OpenVPN client export extraction failed - Unsupported Method

The file pfSenselabs-udp-1194-install.exe generated when click any options of the "OpenVPN Clients" session of the sc... Francisco Cavalcante

01/11/2016

05:37 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

carp check also needs some changes.. will fix that to.. Pi Ba

03:37 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Looks like the 'space' character behind the first ENDOFF terminater made it go wrong..
After removing that it seems ... Pi Ba

03:28 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

The init script /usr/local/etc/rc.d/haproxy.sh breaks, as the ENDOFF terminator gets greedy. Change the terminators t... wolf noble

08:39 AM Todo #5578 (Resolved): Convert the pfSense package Mail Reports (mail/pfSense-pkg-mailreport) to Bootstrap

Seems to be fine, though it will likely need a revisit once the RRD changes are done. Jim Pingle

08:38 AM Todo #5582 (Resolved): Convert the pfSense package RRD Summary (sysutils/pfSense-pkg-RRD_Summary) to Bootstrap

Works fine, at least as well as the old one did. Jim Pingle

08:19 AM Feature #5466 (Resolved): inline config option for Viscosity

Added a while back, tested OK for me on Windows and Mac versions of Viscosity. Jim Pingle

08:17 AM Bug #4281 (Resolved): E-Mail Reports (mailreports package) Error With Multiple Graphs

Jim Pingle

01/10/2016

11:37 AM Bug #5749: OpenVPN Export Certs with password, password doesn't open .pk12 container.

It is on pfSense 2.2.6
The page observed is: https://172.16.0.1/vpn_openvpn_export.php
The package is: OpenVP... Rob Reeves

08:55 AM Bug #5751 (New): SquidGuard target categories not saved when long "Domain List" is provided

I created a new entry in the 'Target categories' tab and tried to copy/paste the testfile which is appended into the ... - -

01/09/2016

04:09 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Thanks for these comments.
The linebreaks in the 'Global Advanced pass thru' seem to be caused by the css added by... Pi Ba

08:24 AM Bug #5749: OpenVPN Export Certs with password, password doesn't open .pk12 container.

Would you provide some more information please?
Affected pfSense version
GUI page on which the issue is observed
... Anonymous

07:58 AM Bug #5749 (Resolved): OpenVPN Export Certs with password, password doesn't open .pk12 container.

When I export OpenVPN certs in a .pk12 container and try to set a password, that password doesn't open the private ke... Rob Reeves

01/07/2016

05:05 PM Todo #5583 (Resolved): Convert the pfSense package Service Watchdog (sysutils/pfSense-pkg-Service_Watchdog) to Bootstrap

looks good Chris Buechler

05:02 PM Todo #5571 (Resolved): Convert the pfSense package Cron (sysutils/pfSense-pkg-Cron) to Bootstrap

looks good Chris Buechler

01/06/2016

02:07 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Settings made to the 'Global Advanced pass thru' textarea box in haproxy_global.php are at least *DISPLAYED* without ... wolf noble

12:57 AM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Should the'View more information' link for this package presented on pkg_mgr_installed.php point to https://doc.pfse... wolf noble

01/05/2016

05:27 AM Bug #5736 (Closed): Squid did not authorize user with Captive Portal

I have 2.2.6 version of PFSense.
Installed SQuid3 with authentication via Captive Portal.
CP authorize users throug... Konstantin Pervushin

05:23 AM Bug #5727 (Feedback): tftp service - errors when stopping service

Pull request has been merged Renato Botelho

01/04/2016

07:06 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

ok thanks, seems i missed those file references, i changed the javascript folder, but forgot to update this file agai... Pi Ba

06:45 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Build errored:
install -m 0644 /usr/ports/net/pfSense-pkg-haproxy-devel/files/usr/local/www/javascript/haproxy_getu... Jeremy Porter

06:32 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

@Jim P, are you sure the build properly got started or perhaps there was some error? 3 hours after commit the package... Pi Ba

05:11 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

Sqee!
I'll wire up my config to this today and see how it plays out! Thanks a bunch! wolf noble

03:44 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

I merged the pull request, rebuild should happen automatically shortly. Jim Pingle

03:04 PM Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap

First bootstrapped version of haproxy-devel 0.36 should be available in a few days..
Pullrequest is send, https://gi... Pi Ba

07:54 AM Bug #5732 (Closed): Qagga: Different output in ospfd.conf based on order of interfaces.

if last interface in ospfd.conf defined as (note the area 0.0.0.0 authentication):
interface ovpns10
ip ospf au... Anonymous