Activity
From 07/09/2012 to 08/07/2012
08/07/2012
-
11:22 PM Bug #2583 (Closed): Web page shown service "has been started" even if a service failed to start
- Web page shown service "has been started" even if a service failed to start.
-
- OpenVPN service won't start after changing the IP of interface using by OpenVPN server.
The system log shown that ... -
10:18 PM Revision 3dc3b15b: Catch another error here
-
-
- Sig 11 is almost always hardware, but not always. If it was a widespread issue, people would have been seeing it for ...
-
07:30 PM
pfSense Packages
Bug #2581: Snort unexpectedly terminates / signal 11 error
- Well, the file replacement doesn't seem to work either. Snort just died again. Here's the error message from the sysl...
-
07:08 PM
pfSense Packages
Bug #2581 (Closed): Snort unexpectedly terminates / signal 11 error
- On the latest build (see details) I can't get snort to stay up. It seems to always exit with a signal 11 error.
I ... -
06:09 PM Bug #2577: On Intel D2500CC vlans don't work until I turn off vlan hardware tagging
- If there's an option for turning off checksum offloading and those other NIC features there's no valid reason to reje...
-
03:53 PM Bug #2577 (Rejected): On Intel D2500CC vlans don't work until I turn off vlan hardware tagging
- Not true in general (and I've never seen that with em) though seems there are always a few NICs that don't work with ...
-
- Vlans don't work on this board.
If I turn of vlan hardware tagging they start working.
Using a config.xml from an... -
04:27 PM Feature #2580 (Closed): Include AICCU
- I would like to see Support for AICCU based IPv6 tunnels.
There is already a freebsd package for AICCU:
http://www.... -
- Already fixed in master and RELENG_2_0.
-
03:04 PM Bug #2579 (Closed): Update script fails to parse multiple DNS entries for OpenVPN properly. (1.2.3 -> 2.0)
- If you use multiple DNS entries in 1.2.3, you are required to semicolon separate them to work properly.
In 2.0, th... -
- When upgrading more then 9 Carp interfaces, if the interfaces start at 0 in 1.2.3 they start at 1 when upgraded to 2....
-
10:50 AM Revision 9f310a63: Merge pull request #208 from phildd/master
- Change rcfileprefix to a constant
- 10:27 AM Revision e9d66ed4: Change rcfileprefix to a constant
- 10:25 AM Revision c5966711: Change rcfileprefix to a constant
- 10:23 AM Revision dd9e0bdb: Change rcfileprefix to a constant
-
09:56 AM Bug #2303: SPD on secondary not cleared after config sync
- pfSense is our primary gateway running behind a telco provided MPLS network. In the event we lose a connection at on...
-
- firmware_update_misc log file name out of date
- 04:01 AM Revision 2e009ccb: firmware_update_misc log file name out of date
- The name was changed to /conf/firmware_update_misc_log.txt in etc/rc.firmware quite a while ago. It needs fixing here...
-
02:41 AM Bug #2204: DHCP reports client lease, but DNS doesn't know about
- I'm having the same issue in 2.0-RC1 with dnsmasq 2.55 .. it takes a long time (often several hours) for DHCP leases ...
08/06/2012
-
02:44 PM Bug #2527: Miniupnpd starts but isn't working
- Started but not working:...
-
- With snapshot running on ALIX 2D13:...
-
09:59 AM Bug #2527: Miniupnpd starts but isn't working
- Works with that binary, you're the man! ;)
-
- Next new snapshot might have a better chance at being OK. If you can't wait and want to try the new binary before the...
-
01:09 AM Bug #2527: Miniupnpd starts but isn't working
- oh right forgot to check that is actually works, i get similar output as above.
-
- With version:
2.1-BETA0 (i386)
built on Sun Aug 5 18:24:50 EDT 2012
FreeBSD 8.3-RELEASE-p3
the service st... -
- starts for me on i386 now.
-
- Minor text typo in DynDNS log message
- 09:44 AM Revision 1bf52c67: Minor text typo in DynDNS log message
- I noticed the "Inital" typo in my syslog, so thought I might as well scan through the DynDNS messages and fix it up.
08/05/2012
-
- Odd that it works on one of my systems but I updated my Alix and it does not work on there. More feedback from others...
-
- Not big and scary, just someone trying to get things done that doesn't want to deal with unappreciative idiots.
Ch... -
02:27 PM Bug #2527: Miniupnpd starts but isn't working
- Now I see why UPnP still doesn't work. That's because you are "working on it". :D Yes, ban me again, you big scary de...
-
10:40 PM pfSense Packages Feature #2576 (Closed): Monitor Multiple Interfaces on "bandwidthd" Packege
- Hi I wold like to request please if there is chance to add the option to monitor multiple interfaces on bandwidthd Pa...
08/04/2012
-
- I'd feel more comfortable with an import function, if for no other reason than I can imagine someone trying to do the...
-
- we've yet to see a single problem with Quagga's OSPF implementation, and in fact it's fixed scenarios that were havin...
-
02:32 PM pfSense Packages Bug #2575: OpenOSPFd pkg BETA 0.5.2 produces invalid ospfd.conf
- Oh, and of course, if the Quagga package does grow an "import" feature, then that's a way to automatically mitigate t...
-
- It's unlikely that an import feature would be *required* - only the most extreme cases would have OSPF configurations...
-
- I thought about making an 'import' feature for Quagga to pull in the config from OpenOSPF since they are so similar. ...
-
- We should likely ditch openospfd entirely in 2.1 on. no need for it, Quagga is already a nicer package, doesn't appea...
-
01:54 PM Bug #2527: Miniupnpd starts but isn't working
- Jim, you have my vote to ban him.. Or lock this bug report so only myself and the developers can comment on since I w...
-
- Maxim Luppov wrote:
> I'm yelling at you, not at the developers. And it's very easy to see difference, like between ... -
04:54 AM Bug #2527: Miniupnpd starts but isn't working
- Jim P wrote:
> And yelling won't fix it any faster, nor will berating/abusing developers. That's a good way to get y...
08/03/2012
-
- Not that this doesn't need fixed, but the OpenOSPFd package has pretty much been abandoned in favor of the Quagga OSP...
-
- Installing OpenOSPFd pkg BETA 0.5.2 on pfSense 2.1-BETA0 (amd64) built on Fri Aug 3 00:17:11 EDT 2012
produces an i... -
- pkg_mgr_install - only mount rw when needed
Probably more comment should be put in the code. -
- And yelling won't fix it any faster, nor will berating/abusing developers. That's a good way to get yourself banned f...
-
- Jim P wrote:
> Maxim Luppov wrote:
> > See no connection between bugs and beta version.
>
> For us, a beta is a... -
- Maxim Luppov wrote:
> See no connection between bugs and beta version.
For us, a beta is actually a beta, not a ... -
12:33 PM Bug #2574 (Closed): Failure of secondary radius server causes PPTP authentication to hang even if primary is working!
- When configuring PPTP vpn to use both a radius server and a secondary radius server the authentication of the user wi...
- 07:54 AM Revision 06aa745e: pkg_mgr_install - only mount rw when needed
- When entering pkg_mgr_install the filesystem was being mounted rw and a backup made of the config, even if the case w...
-
05:06 AM Revision 17ad49a9: Merge pull request #203 from phil-davis/master
- Minor fix to percentage output on pkg install
- 04:45 AM Revision 82acb8b3: Minor fix to percentage output on pkg install
- A variable not changed in a cut-paste.
When on console, update_progress_bar should also only be called for 1-9 then e...
08/02/2012
-
- Jim P wrote:
> Not sure why you'd consider bugs in a beta release sad, if there were no bugs, it wouldn't be beta :-... -
- Not sure why you'd consider bugs in a beta release sad, if there were no bugs, it wouldn't be beta :-)
My last com... -
- All this is very very sad :(
-
03:48 AM Bug #2527: Miniupnpd starts but isn't working
- get back
@
Aug 2 11:52:41 miniupnpd[61172]: HTTP listening on port 2189
Aug 2 11:52:41 miniupnpd[61172]: HTTP li... -
- Latest snap is better but we may have to disable IPv6....
-
12:27 AM Bug #2527: Miniupnpd starts but isn't working
- Okay, as a follow-up: I'm getting these same errors too. My initial response was due to miniupnpd actually starting...
-
-
- Bogons updated - make sure conf_mount_rw and conf_mount_ro are matched
-
- 12:55 PM Revision 342a2f18: Ensure conf_mount_rw and conf_mount_ro are matched
- On nanobsd, running /etc/rc.update_bogons.sh gives:
[2.1-BETA0][admin@test02.homedomain]/tmp(12): /etc/rc.update_bogo... -
- require filter.inc so filter_configure is defined
- 11:17 AM Revision c9a98f18: require filter.inc so filter_configure is defined
- The "renew" button on a DHCP connection ends up calling function interface_dhcpv6_configure() in interfaces.inc, whic...
-
- Tidy package cleanup output
-
10:25 AM Feature #2573 (New): Captive Portal support of RADIUS POD (Packet of Disconnect)
- AFAIK pfsense CP NAS doesn't support RADIUS POD, a feature that is supported by most NAS like Cisco and Mikrotik, and...
- 09:06 AM Revision 449d3e96: Tidy package cleanup output
- Add a "done." and newline after "Cleaning up..."
Then when output is going to the serial console the next line will s... -
- Tidy up percentage logging to console
- 08:01 AM Revision 2a315bee: Tidy up percentage logging to console
- When on the console, the code only intended to update the percentage downloaded every 10%. Due to string-and-int type...
-
- I've had a note here that it needs work but haven't had time to fix it yet. That might be an OK workaround, though I ...
-
06:46 AM pfSense Packages Bug #2572: bgpd[30274]: /var/etc/openbgpd/bgpd.conf: owner not root or current user
Altering /usr/local/pkg/openbgpd.inc like this:
/*
$pkg_login = "_bgpd";
$pkg_uid = "130";
*/
...-
- I think I may have hit a condition where the openbgpd daemon is started as root but the bgpd.conf file is set to be o...
08/01/2012
-
-
-
-
-
- 2.1-BETA0 (amd64)
built on Wed Aug 1 02:42:26 EDT 2012
FreeBSD 8.3-RELEASE-p3
@Aug 2 00:50:53 miniupnpd[7715]:... -
- We have 1 AMD64 saying its working and 2 i386 saying its not working.
Even tho its started on AMD64 builds, are po... -
- it's not!
2.1-BETA0 (i386)
built on Wed Aug 1 03:29:59 EDT 2012
FreeBSD 8.3-RELEASE-p3
Aug 1 15:48:45 miniu... -
- built on Tue Jul 31 18:19:12 EDT 2012
problem solved
@Aug 1 14:40:05 php: : miniupnpd: Starting service on int... -
- 2.1-BETA0 (i386)
built on Tue Jul 31 19:07:24 EDT 2012
FreeBSD 8.3-RELEASE-p3
Aug 1 09:56:03 miniupnpd[9254]: ... -
02:47 AM Bug #2527 (Feedback): Miniupnpd starts but isn't working
-
- Yeah from testing done from us it seemed just wrong build on previous snapshots.
-
- Regarding tonight's snapshot:
2.1-BETA0 (amd64)
built on Tue Jul 31 18:19:12 EDT 2012
FreeBSD 8.3-RELEASE-p3
... -
-
-
-
- Applied in changeset commit:bfede3d446d288f014af12ab28614736859ed917.
-
11:52 AM Bug #2571 (Resolved): Creating a IPv4 GRE tunnel in pfSense 2.1 results in no endpoint IP being set
- When attempting to create a IPv4 GRE tunnel via the web console, the after the GRE tunnel is created no endpoint IP i...
-
-
-
08:24 AM Bug #2529: Captive Portal does not function after update snap or restart system
- Hi Ermal,
Could you please write the exact revision where it was fixed? -
- Please try with next coming snapshots.
-
-
-
-
07/31/2012
-
08:47 PM Bug #2570 (Closed): Status: Interfaces - Fatal error: Call to undefined function filter_configure()
-
Status: Interfaces
Clicking the WAN interface Renew button fails/crashes with this message:
Fatal error: C... -
- Get DHCPv6 relay working (#1663)
-
-
-
- Applied in changeset commit:0b233932f2ec54ddb47a61240fabf02509116767.
-
12:47 PM pfSense Packages Feature #2050: Add IPv6 support to the openbgp package
- Yapp, no doubts.
-
-
-
- Don't conf_mount_rw every time packages are listed
- 09:02 AM Revision a70cdb73: Don't conf_mount_rw every time packages are listed
- Every time System:Packages is selected, the code does a conf_mount_rw, checks for existence of some dirs, then does c...
-
-
- Make acces to shared memory atomic
- 07:25 AM Revision 7074a89a: Make access to shared memory atomic
- Use lock and unlock to make sure that all incrementing and decrementing of the reference count in the shared memory s...
07/30/2012
- 09:45 PM Revision 73c897eb: Fix dhcpv6_relay writing to the dhcpv4 configuration
- Implements ticket #1663
- 09:45 PM Revision 69dd7088: Construct the arguments to dhcrelay -6 correctly
- Implements ticket #1663
-
-
-
02:55 PM Feature #2410: Support name based aliasing via CNAMEs or some other mechanism.
- There is no need to revert the change. Just because it doesn't address *this* issue does not mean it's useless. It'...
-
02:14 PM Feature #2410: Support name based aliasing via CNAMEs or some other mechanism.
- Are you saying that dnsmasq is the product that ships the /usr/local/sbin/dhcpleases file that generates the dhcpd.le...
-
02:08 PM Feature #2410: Support name based aliasing via CNAMEs or some other mechanism.
- Forgot the manpage link: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html
-
- CNAME-support in dnsmasq is somewhat limited. If I'm not mistaken there is no way to specify a CNAME record pointing ...
-
- Only partially fixed.
-
- Request that the old ticket be re-opened, don't open a new ticket for the same issue.
-
- Submitting this because http://redmine.pfsense.org/issues/2410 is marked Resolved, but is not actually Resolved.
N... -
-
08:25 AM Bug #2305: PBI db stored on var does not survive reboot
- Just did a quick test to verify this on nanobsd:
2.1-BETA0 (i386)
built on Fri Jul 27 15:20:29 EDT 2012
Installe... -
- Known issue, part of ongoing work for #1112
-
03:50 AM Bug #2567 (Rejected): IPSec doesn't allow LDAP Authentication server to be configured
- Whenever I add a LDAP Authentication server under System -> User Manager -> Servers in order for my OpenVPN clients t...
-
- Me too - as part of testing Validate advanced gateway monitoring settings https://github.com/bsdperimeter/pfsense/com...
-
- I have also seen this behaviour - both filesystem RW and sig11 process exits. Now I know it is not just me I will loo...
-
- I was trying bandwidthd on a test Alix nanobsd and noticed this also. I didn't report it because bandwidthd doesn't w...
-
- The DHCPv4 service allows the Windows MAC address format (xx-xx-xx-xx-xx) to be entered in a DHCP reservation mapping...
07/28/2012
-
-
- duplicate of #2527
-
- I'm having this issue too. It's been reported many times, but the previous Issue report is marked "Resolved" even th...
-
07/27/2012
-
- 2.1-BETA0 (i386)
built on Fri Jul 27 06:36:14 EDT 2012
FreeBSD 8.3-RELEASE-p3
Jul 27 20:23:28 miniupnpd[15655]... - 09:20 PM Revision 01d518e7: Supress the error message if the ldap bind doesnt happen
- 09:19 PM Revision 323dc2e7: Supress the error message if the ldap bind doesnt happen
- 09:05 PM Revision 601c91a7: Make use of product_name
- 09:03 PM Revision 9af5f459: Make use of product_name
-
-
-
- Snapshot from 26 July
@Jul 27 20:38:16 php: /pkg_edit.php: miniupnpd: Starting service on interface: lan, opt1
Ju... -
- Still broken in:
2.1-BETA0 (amd64)
built on Thu Jul 26 22:35:25 EDT 2012
FreeBSD 8.3-RELEASE-p3 -
- One of the big Deprecated function is pass-by-reference
Helpful grep pattern from http://core.trac.wordpress.org/tic... -
10:33 AM Bug #2564 (Closed): Import from m0n0wall breaks pfSense if dashes are in an alias
- We just tried to upgrade from m0n0wall 1.33 to pfSense 2.01. We booted (live CD), configured the LAN IP, and restore...
-
- Ok, with added patches it now adds the IPv6 addresses with a subnet mask of 128 for hostnames. Should show up in a bu...
- 03:09 AM Revision 843f10cc: 99./8 is not private IP space
- 03:08 AM Revision 37bc0466: 99./8 is not private IP space
-
07/26/2012
-
11:16 PM Revision 86e88098: zone names can only contain A-Z a-z 0-9 _.
-
- fixes #2560
-
-
- Any news on this?
-
- duplicate
-
- miniupnpd is not working anymore.
2.1-BETA0 (i386)
built on Tue Jul 24 18:28:37 EDT 2012
FreeBSD 8.3-RELEASE-p... -
- b83amd64# host pro6pp.appspot.com
pro6pp.appspot.com is an alias for appspot.l.google.com.
appspot.l.google.com has... -
09:29 AM Feature #2563 (Closed): Hardware Sizing - Traffic Shaping not mentioned
- Please consider adding traffic shaping as a feature consideration on the Hardware Sizing web page.
http://www.pfse... -
- Validate advanced gateway monitoring settings
- 06:26 AM Revision 4b957845: Merge pull request #193 from phildd/master
- Allow dom_title width parameter to be null
- 02:47 AM Revision ae329c30: Allow dom_title width parameter to be null
- This prevents warning messages if called without the width parameter - reported in forum http://forum.pfsense.org/ind...
07/25/2012
-
-
- Jim P: I've upgraded to 2.1 again, and I'm not having that issue anymore, so I think we can mark this one as either a...
-
- not a legit bug report, that's a support request. Please post to the forum or mailing list.
-
06:16 PM Bug #2561 (Rejected): OpenVPN :: Client Specific Override ::
- Say for example my main OpenVPN server is set up to use 192.168.2.0/24 as the Tunnel Network.
I use the web interf... - 04:12 PM Revision eb233517: Validate advanced gateway monitoring settings
- Use the default values from return_apinger_defaults.
Validate values - low less than high, probe interval less than "... - 04:05 PM Revision 14661668: Put apinger default values into a function
- The default advanced apinger parameter values are now returned by function return_apinger_defaults. So they can easil...
-
- Add "done" after "Starting NTP Time Client"
- 01:25 PM Revision de00c381: Add done after NTP Time Client start message
- Add a done and newline so the console messages at boot all line up the same.
-
- The errors that occur upon the reconnection:
racoon: ERROR: failed to begin ipsec sa negotication.
racoon: ERROR:... -
- This issue is still present in the latest 2.1 Development build with a different twist:
1.) Reset racoon
2.) Mobi... -
- 2.1-BETA0 (i386)
built on Tue Jul 24 18:28:37 EDT 2012
FreeBSD 8.3-RELEASE-p3
ul 25 16:20:59 miniupnpd[13405]:...
07/24/2012
- 09:41 PM Revision 983fb4d2: Handle when the tab is set to host or network that the IP tab should still be displayed
- 02:35 PM Revision a5416de2: Return the user to the tab they were working originally working on
-
- Want to confirm that miniupnpd is not working in 7/23 build either.
2.1-BETA0 (amd64)
built on Mon Jul 23 20:21:... - 12:54 PM Revision 3a8e5e3c: Apply same logic and only display 10 Urls
- 12:19 PM Revision 86675c70: Display the URL's listed and not the word 'array'
-
12:01 PM Bug #2556 (Closed): PPTP Server not working since 2.0.x Upgrade
- I had PPTP (server) working reliably under 1.2.x, but after Upgrading to 2.0.1 I can't get it working. I posted on th...
07/23/2012
-
03:02 AM Feature #2552: Set the timezone in setup_php_ini.sh
- Phillip Davis wrote:
> Used a slow link to do a Firmware Upgrade from the Sat 21 July build to:
> 2.1-BETA0 (i386)
...
07/22/2012
-
- Used a slow link to do a Firmware Upgrade from the Sat 21 July build to:
2.1-BETA0 (i386)
built on Sun Jul 22 13:36... -
- For info, the current full text of the default php.ini is available at:
http://svn.php.net/viewvc/php/php-src/trunk/... -
- Small edit of my previous post: the limits are actually set to (900, 1800) seconds (15/30 minutes) and work fine like...
-
- Re: execution timeouts - max_execution_time and max_input_time
I reduced these to see what would happen for package ... -
- Re: execution timeouts
I did some research and testing on this, as I have slow links in places (128kbps) and some pa... -
08:40 PM Bug #2555 (Resolved): check_reload_status consumes 100% CPU usage
- As per forum thread located at http://forum.pfsense.org/index.php/topic,51468.0.html
check_reload_status takes 100... -
- Minimal non-intrusive change for SSHDCond package extra parameters
-
- Remove unused set_time_limit in php.ini
-
- Fix hardcodded alias type so alias suggestion works as expected while creating nested aliases.
-
11:48 AM Bug #2527: Miniupnpd starts but isn't working
- Not sure if it is the same issue or not, but I noticed that miniupnpd wasn't working in the 7/13 build, so I updated ...
- 08:58 AM Revision 4e315836: Remove unused set_time_limit in php.ini
07/21/2012
-
03:21 PM Bug #781: Entering sim code problem on a Huawei E1752
- I had this problem today with a Huawei E173-u2. For some reasons the Windows software refused to disable the PIN chec...
07/20/2012
-
- Hi Jim, I was digging further and I've tested the following combinations:
* Fedora 17, amd64, Firefox 13.0.1, with... -
- What browser are you using to test this? I know these things tend no to work in IE.
Also if you get any JS errors ... -
- Since version 2.0.1 killing a client's connection no longer works from the OpenVPN status page. Still, killing the co...
07/19/2012
-
07:21 PM Bug #1974: Captive Portal RADIUS accounting bytes wrong
- I can confirm this has been fixed in the 2.1 snapshots. Thank You!
-
- Sorry for the delay, but the more I think about it yes, Univa IT is correct. This is a partial solution, but it does...
-
- I cant seem to find anything on developer.apple.com to give insight into what iOS supports.
On http://developer.appl...
07/18/2012
-
-
-
- Applied in changeset commit:3cd2ea2c5c7a5bd98ce0efc8de5f568d3226c8ea.
-
- Our list expands to:...
-
- Had a moment to iterate over our options and see which was causing the problem.
If I take out
> TLSv1+HIGH
The... -
- After the recent lighttpd upgrade to 1.4.31, iOS clients have issues connecting with Safari (Chrome on iOS is OK)
... -
-
-
-
- Adjust the timeouts to something more sane then 99999999. Do note that these might need to be adjusted later.
Also no... -
- Redmine ticket #2546
-
-
- Set the timezone in php.ini now. Seems to work for me.
Also adjust the execution timeouts, this would mean that at s... -
- We do not currently set the system timezone in php.ini
Doing so would make it easier for package maintainers. -
-
- Feature checked in, please test.
-
- I found that running killall php from the console a few times often unwedges this and suddenly the page loads.
07/17/2012
-
- This doesn't address the original user's request. I have the same request that he does. I want a CNAME to work for ...
-
- The real fix here is already in 2.1 -- we've moved to PBI based packages that are completely self-contained/isolated,...
-
11:20 AM Bug #875: Uninstalling packages can remove system libraries
- Im sorry, I didn't mention that it happened on 2.0.1-RELEASE (amd64)
-
- I belive this bug still exist.
I've recently installed and subsequently removed a few packages for testing purpose... -
- Probably 2.2-ish?
-
-
07/16/2012
-
- Please do this through barnyard or something esle.
-
-
- This depends on the configuration.
For now if you use all rules too much space is needed that might not be availble ... -
- There are still some places to work out for completing this.
-
- This is done all in php and seems to work ok now.
-
- All these is working correctly now.
-
07/15/2012
-
- pkg_edit - add show_disable_value option to select_source xml option
07/13/2012
-
06:15 PM pfSense Packages Bug #2549: Snort 2.9.2.3 pkg v. 2.4.0 creates invalid configuration
- Upgrading to v2.4.2 fixed the "no end brace found" error, but I still get "Missing argument to SSL_PORTS_IGNORE" if I...
-
- I still have not seen anyone else that can replicate this, but I have been extremely busy so I haven't been able to c...
-
- Jim-P: do you or any other developers need any additional information about this one? I'm really interested in gettin...
-
03:22 AM Bug #2550: Cannot delete limiters...
- Sorry already reported in http://redmine.pfsense.org/issues/2482
07/12/2012
-
10:57 PM Revision 84e94f82: include check to avoid function_exist errors
-
-
-
-
-
-
- Hi,
I'am on the latest version BETA0 Jul 11.
In the web interface, when I want to delete a limiter with the bu... -
- A temporal work-around to this problem is restarting the Captive Portal for the 2nd time, at the end of the boot-up p...
-
- Has been solved on latest versions.
07/11/2012
-
09:06 PM Feature #814: GUI should allow to bind openvpn on different ip same port
- Hello, already is possible run 2 openvpn instances in same port using diferent Wan Interfaces?
-
- I was setting up two pfsense 2.0.1-RELEASE i386 firewalls with the snort package today; one happened to get v2.3.0 an...
- 06:13 PM Revision 16187ecf: Correctly handle getopt so notifications are sent
- 06:09 PM Revision 2f909e2e: Correctly handle getopt so notifications are sent
-
- I recompiled it after doing a slightly different preparation method this time, so hopefully the next snapshot is better.
-
03:32 PM Bug #2527: Miniupnpd starts but isn't working
- Confirmed broken again on July 10th snapshot.
-
- I emailed you the config.xml as well as the logs I captured over this weekend. They should contain all the info you ...
-
- Jim P: I'm happy to provide as much information as I can. I only posted this report after I saw another user complai...
-
- This does not appear to be a general issue as I have several VMs around on current snapshots and they are pinging thr...
-
- Forgot to mention another symptom:
LAN workstations are able to ping or traceroute WAN-Hosts, if and only if the t... -
- *PREFACE:* I spent 5 days examining this issue, along with 2 network engineers. The issue described does not appear ...
07/10/2012
-
-
08:17 AM
Bug #2527: Miniupnpd starts but isn't working
- Actually it's broken again:
http://forum.pfsense.org/index.php/topic,50971.msg273385.html#msg273385
07/09/2012
-
- There was a lingering issue here with the speed not staying on upgrade. That should also now be solved - though becau...
-
-
-
- Opening this back up as it's happening again on 2.1.
On my ALIX I have a single package installed, blinkled. After... -
- Afer update the package, pbi_info show me the old package and new package ?
In this example, see the squid package
...
Also available in: Atom