Activity
From 07/11/2020 to 08/09/2020
08/09/2020
-
11:42 AM Bug #10824: BIND shutdown - dynamic zones, unclean shutdown causes startup to not load zones
- Sorry, very poor bug. Affected version is PFSENSE 2.4.5p1 and BIND 9.14_7.
-
- Bind is killed quite TERMinally in the /usr/local/etc/rc.d/named.sh script - with a SIGTERM. This causes the server t...
-
- Sorry, very poor bug. Category is BIND. Affected version is PFSENSE 2.4.5p1 and BIND 9.14_7.
-
- Generator for {/cf/named}/etc/namedb/named.conf needs updating to include ::1 as well as 127.0.0.1 on PFSense instanc...
-
09:20 AM Bug #10791: Valid (vlan)interfaces do not get vif reporting "Invalid phyint address"
- I am testing an early PIMD-3-beta at the moment. I do that in cooperation with the PIMD-maintainer.
Version3 does...
08/08/2020
-
09:28 AM Feature #10665: Manual OSPF neighbor definitions
- https://github.com/pfsense/FreeBSD-ports/pull/916
08/06/2020
-
10:13 AM Feature #10818 (Resolved): UDP Broadcast Relay
- Current packages like Avahi and PIMD can help users cast across VLANs, which is great for HOME/GUEST to IOT type scen...
08/05/2020
-
07:23 PM Bug #10817 (Duplicate): FRR upgrade/install process hangs
- Duplicate of #10610
-
06:28 PM Bug #10817 (Duplicate): FRR upgrade/install process hangs
- Installing or upgrading to FRR 0.6.7_4 results in a process hang, see attached photos
CLI hang is shown after the ... -
- Added in https://github.com/pfsense/FreeBSD-ports/commit/cae5ee237cfabc90ea5ef4dfd480acfc9055e26f
-
- BGP can carry routes for both IPv4 and IPv6 to a single neighbor of either type. Currently the code only activates th...
08/04/2020
-
-
- FRR SNMP module for 2.4.5 branch:
https://github.com/pfsense/pfsense/pull/4418 -
- https://forum.netgate.com/topic/155795/frr-0-6-7_3-enable-snmp-agentx
frr for pfSense 2.4.5-p1 doesn't have snmp m...
08/03/2020
-
- menu entry link is OK in the latest FRR pkg
08/01/2020
-
06:25 AM Feature #10809 (Resolved): IDS/IPS - Notifications when new rule categories are released
- Please allow users to enable system notifications when new rule categories appear.
As IDS rules are not enabled as t...
07/29/2020
-
-
- https://github.com/pfsense/FreeBSD-ports/pull/898
-
- Add Huawei ME909u-521
-
08:11 AM Feature #10347: Request to add pull-filter
- Discussion about --route-nopull:
https://sourceforge.net/p/openvpn/mailman/openvpn-devel/thread/4B3OgL3j077iDP_MhneR...
07/28/2020
-
- Hello,
PIMD still not properly working. So I opened tow FeeBSD Bugs. This one is FreeBSD bug 248103.
Also see ht... -
- Despite that this issue has state "Fixed". it is _*not fixed at all !!*_ So please "reopen" this bug!
07/27/2020
-
11:53 AM Feature #10789 (Feedback): FRR integrated configuration and hitless reloads
- Convert FRR to use an integrated configuration file and use frr-reload where possible for hitless configuration chang...
-
- That's an issue between ntopng and your browser, not in code we have any control over. If you can still reproduce it ...
07/26/2020
-
11:43 AM Bug #10788 (Rejected): ntopng not displaying graphs correctly. Bottom of graphs getting cut off.
- ntopng graphs are getting cut off where I can not see the time on historical graphs.
To duplicate, I go to Hosts M...
07/24/2020
-
-
09:01 AM Feature #10785: Allow Setting of ldapcachetime
- OK, done:
https://github.com/pfsense/FreeBSD-ports/pull/913 -
- Please create a pull request in github, that process is much easier for us to review and approve for inclusion. Thanks!
-
- We're using Squid/Squidguard with many (!) ldap based group filters.
This does not scale because squidguard does n...
07/22/2020
-
-
- Fix:
https://github.com/pfsense/FreeBSD-ports/pull/912
see also #8454 -
-
- Fix:
https://github.com/pfsense/FreeBSD-ports/pull/912 -
-
- https://github.com/pfsense/FreeBSD-ports/pull/911
-
09:07 AM Bug #10783 (Closed): NtopNG is very unstable on arm64
- NtopNG will start and run after being initially configured even though this error:...
07/20/2020
-
-
- *Remove:*
Abuse Ransomware Tracker:... -
- Comments:
https://forums.malwarebytes.com/topic/258056-hosts-filenet-domain-lists-are-broken-what-happened/
https:/... -
-
- Allow to select SSL/TLS Compatibility Mode in the same manner as Squid SSL Proxy Compatibility Mode option.
Interm...
07/19/2020
-
05:48 AM Bug #10775 (Resolved): pfblockerNG SBL_ADs and hpHosts are not reachable anymore
- Following entries of pfblockerNG pkg are not reachable for a long time, we have some tickets and also I can see some ...
-
- As allready reported startup behavoir is not yet ok (pimd starting *5 times !!*). Hereby some info form today bootlog...
07/17/2020
-
- https://github.com/pfsense/FreeBSD-ports/pull/908
-
- + squidGuard doesn't remove Custom Options (Before Auth), Custom Options (After Auth) and Custom Options (SSL/MITM)
-
06:16 AM Bug #10771 (Resolved): arpwatch: option to not send hourly email notification on cron run
- dirty workaround by editing /usr/local/arpwatch/sendmail_proxy.php
< if (false !== $message) {
> if ((false !==... -
- there is currently no way to disable email notifications once you have enabled them by entering a email adress. you s...
07/16/2020
-
- > If you are using a PFsense HA configuration with a virtual HA_IP, you have to add these HA virtual IP to the advanc...
-
10:47 AM Bug #10768 (Rejected): Squidguard overwrites Advanced Config from Squid Proxy in HA Configurations
- If you are using a PFsense HA configuration with a virtual HA_IP, you have to add these HA virtual IP to the advanced...
-
- It's better to prevent users from creating new ACMEv1 keys in order to avoid errors, such as:...
-
09:07 AM Bug #10763 (Feedback): Incorrect link to frr_bgp.xml
- PR has been merged. Thanks!
-
- PR has been merged. Thanks!
-
- I did retest today e.g. using a clean install. Still bizar how many times pimd is started and stopped during boot. On...
-
- stop Squid service first,
then ...
07/15/2020
-
10:50 PM Bug #10767 (Rejected): squidGuard still not upgrading
- Just upgraded squid to 0.4.44_29, it did not confirm a successful upgrade as I am used to but after a reboot it showe...
-
-
- https://github.com/pfsense/FreeBSD-ports/pull/906
-
-
- https://github.com/pfsense/FreeBSD-ports/pull/904
-
- If you are trying to access the menu item Services / FRR BGP, for example, from Services / Snort / Interfaces,
you'l... -
- That message is not a bug, it's output from the FreeBSD package installation and can be ignored. If you have a proble...
-
07:24 AM Bug #10764 (Not a Bug): FRR 0.6.7_1 does not work
- After update to FRR 0.6.7_1 ospf stop working
Message from frr7-7.3.1:
--
FRR's OSPF daemons tries to allocate... -
- Typo fix:
https://github.com/pfsense/FreeBSD-ports/pull/905 -
- Ben Hughes wrote:
> Yes I had a look back at the FRR commit history and found only that as well.
>
> It will fai...
07/14/2020
-
- Yes I had a look back at the FRR commit history and found only that as well.
It will fail to start complaining ab... -
- Ben Hughes wrote:
> Argh i've had a bit of a freudian slip there, I meant @libunwind@.
What is the error you see ... -
- Argh i've had a bit of a freudian slip there, I meant @libunwind@.
-
- Ben Hughes wrote:
> No problem, glad to get it in there!
>
> I've just been re-reviewing this looking forward to ... -
- No problem, glad to get it in there!
I've just been re-reviewing this looking forward to getting off my custom pac... -
- PR has been merged. Thanks!
-
- I just did a clean install (built on Tue Jul 14 09:23:16 EDT 2020) and PIMD 0.03 Significant issues left, but the boo...
-
-
11:12 AM Bug #10741: Fails with CARP VIP Status - SQUID
- Thiago Orico wrote:
> adjusted the setting and it looks like it worked.
>
> We will monitor new tests.
Case so... -
- PR has been merged. Thanks!
-
- 1.4.23_1, fixed:...
07/13/2020
-
-
07:41 PM Feature #10421: suricata unix_stream support for telegraf
- Support for the requested feature has been added to the latest version of the Suricata GUI package, version 5.0.3. Th...
-
-
- This bug has been corrected in the latest version of the Suricata GUI package, version 5.0.3. The pull request has be...
-
- adjusted the setting and it looks like it worked.
We will monitor new tests. -
- Symptoms persist.
Details:
inside the squid packet, the advanced rule of port 3128 of the proxy does not automa...
07/12/2020
-
02:07 PM Feature #10761: Multiple domains in one SAN entry would be very useful
- Thanks Jim, I used the wrong terminology re domains/SANs.
The intention is still valid - would be good to have a s... -
- That's not how Let's Encrypt/ACME works. Let's Encrypt must verify all entries separately. There is no way to put all...
-
- For now I just gave up and used a wildcard, let the hackers have at it.
-
- I was referring to multiple domains inside a *single* SAN - otherwise the same DNS keys, API tokens, etc are copied m...
-
12:40 PM Feature #10761: Multiple domains in one SAN entry would be very useful
- Hello -
Please post to the forum for assistance. There is an ACME-specific category at https://forum.netgate.com/c... -
- In the Domain SAN list, I'm not currently able to add multiple domains in the 'Domainname' box, for ex. cannot use:
...
07/11/2020
-
04:53 PM Bug #10760: pfSense BIND 9.14.12 server terminates due to assertion failure
- Secondary question, is there is method to configure pfSense to auto-restart named on failure?
-
- The assertion failure is in ns_client_error() which means that its impossible to file a reasonable report upstream wi...
-
- BIND is periodically terminating and not automatically restarted. The system log shows:
Jul 6 13:13:21 named 6... -
- It can be a one-time name resolution, like HAproxy ACL (network/url/urltable aliases),
see #9793 for example -
- works as expected:...
-
- works as expected:...
-
07:46 AM Bug #10749: squid + captive portal authentication not working
- I have same problem (WPAD + explicit Squid with Captive Portal authentication) since I update pfSense to 2.4.5 and sq...
Also available in: Atom