Activity
From 10/03/2012 to 11/01/2012
11/01/2012
-
01:16 PM Bug #2306: USB ports show up as network interfaces
- I'd much rather just set that in loader.conf by default, the fewer kernel patches the better.
-
11:19 AM Bug #2306: USB ports show up as network interfaces
- Maybe just patch it to give a default value of 1 to disable it in kernel?
-
-
12:28 PM Bug #2671: Call to undefined function read_layer7_config
- I can confirm that it's working.
-
- Already fixed here https://github.com/bsdperimeter/pfsense/commit/e8f35171571cf6d5e13d821d9b6b65c8060fc790
-
- Full error is: Fatal error: Call to undefined function read_layer7_config() in /etc/inc/filter.inc on line 843
Happe... -
- The dummynet patch for pf(4) needs tuning to work properly for bridging.
It should set PROTO_IFB | DIR_FWD
10/31/2012
-
- Applied in changeset commit:cf205dca239bc0f32f81c1df74d76478dc07747f.
-
06:07 PM Bug #2670 (Resolved): Trafic shaping with virtio NIC
- I'm running 2.1 snapshot (Oct 25 2012) with virtio NIC (KVM guest). I had to modify /etc/inc/interfaces.inc to be abl...
-
- Running 2.1 snapshot from Oct 25 2012, the redirect URL after authentication is wrong (missing the / between host and...
-
04:54 PM Bug #2524: SNMP only shows one processor on a dual core system
- I have a second system that is doing this now too.
When I type dmesg | grep -i cpu it shows:
CPU: AMD Athlon(tm... -
03:52 PM Bug #2398: tftpd and tftp-proxy (inetd?) dies after WAN periodic reset
- In /etc/inc/filter.inc around like 1858, try changing the place where it does a kill -HUP on inetd with two commands ...
-
01:07 PM Bug #1112: IPsec GUI/backend missing RADIUS support
- Thanks for response.
Think you that is resolved quickly?
-
- This is not a mismatch of the rule but just how the system works.
There should be teached to pf(4) route-to for v6 t... -
04:05 AM Feature #2668 (Resolved): Support aliases in OpenVPN local/remote/tunnel network fields
- I put aliases in for each of the networks or related groups of networks around my intranet. These are handy to use in...
-
- Some time between September 7 and October 29 IPv6 on VLANs, maybe only in combination with lagg, has broken. The fire...
10/30/2012
-
- Applied in changeset commit:b0bf6bd017e27f6d8161fe8fff0ba8e6a71f96a3.
-
- Applied in changeset commit:f85da3b5828843b8c1a904b05c2f9d612eab1b56.
-
- Applied in changeset commit:e08a5153f9a281fdbb3a0cb66fddfea4b23a19a6.
-
- There is no script yet, which is why this ticket is still open.
-
- Good evening,
it's possible to have the script file?
I don't understand where make the change.
thanks a lot... -
- Applied in changeset commit:d8bddd2a44ce5776d2dfd3c4db79576e073f5aa0.
-
06:54 AM Bug #2441: Setting up a new PPP interface (3g) hangs the webUI
- Probably the same as #2433
-
- I've found a workaround long time ago but I forgot to mention here.
- installed Cron package
- added line : "/usr...
10/29/2012
-
- traffic coming in on a gif interface wrongly matches the out direction on the gif. For instance this: ...
10/28/2012
-
- it's already set to the maximum cache size, but is hard coded.
-
02:11 AM Bug #2651: traffic RRDs broken after upgrade to 2.1
- File paths updated to ease patch application. Patch contents unchanged.
-
- thanks for the follow up
10/27/2012
-
10:40 PM Bug #2617: resolv.conf missing ipv6
- BTW this seems to work after the change to the ISC client. I don't see this with the Oct 25th snapshot and didn't see...
-
03:24 PM Bug #1523: DHCP settings checks only one interface IP via ifconfig to validate settings
- D'oh! I wish I had looked here before typing up a ticket that is exactly that same issue as in this ticket. In my cas...
-
-
09:15 AM Feature #2637: Add ability to define dnsmasq cache size
- That line is not exactly what is default, I change my --local-ttl to something realistic for local static entries tha...
-
- Just took a look at where dnsmasq is started in services
mwexec_bg("/usr/local/sbin/dnsmasq --local-ttl 86400 ...
10/26/2012
-
- Commits of 23 Oct 2012 have fixed this - both data entry form for limiters and code that implements them are working.
-
- setting hw.usb.no_pf=1 in loader.conf will fix this. I didn't quickly see where to set this for new installs and upgr...
-
04:10 PM Bug #2638 (Feedback): Captive portal status widget on the Dashboard is not working
- Applied in changeset commit:61cf2b7ed7cfbbab57ec049032d6b953b921904d.
-
04:05 PM Bug #2529: Captive Portal does not function after update snap or restart system
- Anything I can do to help move this along? I'm fairly new to pfsense but competent and would love to see this fixed A...
-
- Applied in changeset commit:219d9eb9a987387beff52a3852734e049aae1882.
-
- the issue as described doesn't really exist.
-
- Applied in changeset commit:f8b6431222602e206eac046fa68e24a8c35c1659.
-
- just need input validation to prevent / from being used in the virtual server name in load_balancer_virtual_server_ed...
-
- same error still there but has shifted to line 3840
-
10/25/2012
-
- After further consideration I think it would be better to reduce the number of rows to match the 2.1 definition.
Als... -
- adding comments from duplicate #2664...
-
- duplicate of #2651
-
03:56 AM Bug #742: apinger doesn't recover opt wan when connection returns.
- Same here on 2.1-BETA0 (i386) built on Wed Oct 24 14:05:19 EDT 2012, FreeBSD 8.3-RELEASE-p4
==== LOG ====
Oct 25 ...
10/24/2012
-
- Changing:
$rrdcreate .= "RRA:AVERAGE:0.5:60:1000 ";
to
$rrdcreate .= "RRA:AVERAGE:0.5:60:3000 ";
in upgrade_0... -
- After upgrading from 1.2.3 to 2.1 the rrd traffic & packets graphs no longer work. However graphs are OK if upgrading...
-
08:36 AM Bug #2663 (Resolved): PPTP on WAN Gets blocked via default deny rule.
- When using PPTP to Dial WAN the default deny rule blocks traffic.
I searched for a solution for this for months now,...
10/23/2012
-
- This should behave better on latest snapshots.
-
- Should be working with next round of snapshots.
-
- I don't recall how I was testing previously. On a current snapshot though, an IPv4 route does disappear when it is di...
-
02:28 AM Feature #804: Ability to enable/disable static routes
- Jim I didnt test with v6 so was wondering if your testing was for v6. v4 seems to work for me:
I added a route 8.8... -
06:11 AM Feature #2660: Checkbox to disable re-install packages after a config restore
- Should of course be:
because it removes all packages and then adds them. -
- I have 2 identical machines for running a multi LAN/WAN pfsense.
One machine is running and a 2nd is there as a spar...
10/22/2012
-
06:07 PM Bug #2633: Captive Portal timeouts cause users to be stuck in limbo
- After combing through all the Captive Portal code and countless hours of testing, here's what I found:
- Due to the...
10/20/2012
-
-
-
-
-
- one WAN with multiple gateways isn't really supported. It can be made to work with floating rules to override the pol...
-
- part of #628
-
-
- no actual bug here.
-
-
- 0.8.1 has those which has a ticket elsewhere
-
- can't replicate
-
- we'll add that when we update that page in general. this isn't a place for documentation-related things so closing.
-
-
- don't think this is a bug really, it's counting enabled P2s by design.
-
-
-
01:57 AM Bug #2441: Setting up a new PPP interface (3g) hangs the webUI
- Seth Mos wrote:
> I found that running killall php from the console a few times often unwedges this and suddenly the...
10/18/2012
-
01:58 PM Bug #2475: Connection rate limiting does not work for Captive Portal
- I can confirm that mod_evasive doesn't seem to be included in 2.0.1.
Should there be a mod_evasive.so... -
- This feature bug is related to this ticket.
http://redmine.pfsense.org/issues/2551
10/16/2012
-
05:25 AM Bug #2074: Changing interface IP changes interface assignment as well
- I re-tested on the 2.1-BETA0-i386-20121014-1810 snapshot.
Unfortunately, the problem still occurs.
Right after ...
10/13/2012
-
01:10 AM Feature #2588: Import latest Intel Ethernet card drivers for FreeBSD 8-STABLE
- Any news or suggestions?
I've sheduled restart of boxes with 82574L, every 48 hours, but this does not look good fo...
10/12/2012
-
- Agree - this was broken by https://github.com/bsdperimeter/pfsense/commit/c9ba2f8a92b0e18b891af2049436d4a3a505f9d9
I... -
01:33 AM Bug #2658 (Resolved): limiter went dead with recent patches
- limiter dont seem to work or atleast appear dead, more info here http://forum.pfsense.org/index.php/topic,54595.0.html
-
09:05 AM Bug #2401: Mounting read-only after mounting read-write can be very slow on NanoBSD
- I've updated to 2.1-BETA0 (i386) built on Thu Oct 11 yesterday and having the sames issues like described by you all....
-
05:29 AM Bug #1454: Voucher error messages character set problem
- Problem still affects 2.1-beta - using a non-ASCII character anywhere will cause pfSense to corrupt it's config file,...
10/11/2012
-
-
08:33 AM Bug #2657 (Closed): Potential weakness of the captive portal voucher system (design issue)
- If the holder of a voucher can guess the encoded roll and ticket IDs and magic number (in particular if the default c...
-
02:50 AM Bug #2656 (Closed): The "/" char in Virtual Server name disable the server
- If there is a "/" character in Virtual Server name, the service will stop respond to the IP address assigned.
Moni...
10/10/2012
-
- The "fix" for this also gets wiped out when you update... need a real fix ASAP!
-
08:36 AM Bug #2582: OpenVPN service won't start after changing the IP of interface
- Update to my original issue. After editing the /var/etc/openvpn/server1.conf file with a the new IP everything worke...
10/09/2012
-
- Brought limiters up-to-speed with IPv6.
-
12:28 AM Bug #2655 (Resolved): RRD Graphs for Captive Portal not working
- Under RRD Graphs ---> Cutom --> Captive Portal
No data graphing -
- Not yet fixed only work around can do the trick. The start up bug still exists. After a snap upgrade or a system rebo...
10/06/2012
-
- Applied in changeset commit:6f3d3a0781556890e3a6158e32374aed2229f2bd.
10/05/2012
-
06:33 PM Feature #1492: Captive Portal Interim Updates
- Perhaps something like this, which is based on what we use in production for 2.0: https://github.com/bsdperimeter/pfs...
-
- Ideally, pfSense should accept the Acct-Interim-Interval sent by the server to determine interim update interval, as ...
-
- See https://github.com/bsdperimeter/pfsense/pull/236
-
- We have done this on our installations, but the only patch file I have is rather comprehensive and covers all our RAD...
-
- When using a captive portal, the need is often to display T&C and prevent casual users from getting access, not to pr...
-
- Still should be its own ticket - it's not the same issue as this one, and this is technically a deficiency in functio...
-
09:22 AM Todo #2652: Add edit function for imported CRLs
- I'm with Ermal on this, it should be weighted a bit heavier than "nice to have".
-
- I just changed my WAN on a test system from DHCP (which had 192.168.9.101 at the time) to a static IP (192.168.9.99) ...
-
- It's unlikely that it's the same issue still. Try a 2.1 snapshot, there has been a ton of work done in this area sinc...
-
07:57 AM Bug #742: apinger doesn't recover opt wan when connection returns.
- This one should be reopened. Apparently it was closed only because of lack of feedback...
I experience the same is...
10/04/2012
-
- I should clarify. We have 4 OpenVPN server instances total on this particular pfSense box, with the remote access se...
-
- I also had this same issue, although I'm using 2.0.1 AMD64 release on a virtual machine under VMWare ESXi 5.0.0. We ...
-
- Might be nice as a separate feature request for the future, but not something I'm thinking of doing now.
-
- Normally should be added even an option to update CRL from some web source. This is very common on many platforms.
-
- Currently imported CRLs can't be edited to paste in a new/fresh CRL, which makes updating them cumbersome (have to ad...
10/03/2012
-
-
- None of the traffic graphs work after upgrading 2.0.x->2.1. In system log: ...
Also available in: Atom