Activity
From 12/28/2014 to 01/26/2015
01/26/2015
-
07:12 PM Bug #4306 (Resolved): bacula-fd configuration file location is incorrect
- Bacula is running with:...
-
02:16 PM Bug #4304: pfflowd non-functional on 2.2.x versions
- The Packages page reports version as:
0.8 pkg v1.0.2 -
- Jan 26 20:56:32 pfflowd[40995]: pfflowd listening on pfsync0
Jan 26 20:56:32 kernel: pfsync0: promiscuous mode enabl... -
01:36 PM Bug #4271 (Rejected): vnstat2 conf file not pointing to proper path
- duplicate of #4282
-
12:45 PM Bug #4301 (Closed): arpwatch not sending email reports on 2.2
- Not much info I can provide for this one but arpwatch isn't sending email reports anymore after upgrading to 2.2 amd6...
-
08:44 AM Bug #4217 (Confirmed): siproxd on pfSense 2.2-RELEASE i386 fails to start
- siproxd works fine on amd64 but fails on i386.
Crashes with signal 4.
01/25/2015
-
04:42 PM Bug #4295 (Resolved): stunnel not working in Release 2.2
- Installed Package stunnel on pfsense 2.2 but is doesn't work.
(Please see attached file)
I was able to resolve th... -
04:26 PM Bug #4293: Squid 2.7.9 pkg v.4.3.6 i386 won't start
- understand from irc the 64bit package works ok - i386 seems to have issues
-
- squid not starting following upgrade to 2.2
32 bit
squid-2.7.9_4-i386
php-fpm[259]: /rc.start_packages: The co... -
- Don't forget to also check that the package continues to work on 2.1.x with the fix applied. If it does not, then mor...
-
01:53 AM Bug #4282: Vnstat2 1.11 Does Configuration Parser Error
- i tested this and it seems to solve the issue
-
12:55 AM Bug #4282: Vnstat2 1.11 Does Configuration Parser Error
- After digging into this further, this is a "feature" of the PBI architecture, and a bug in the package. The PBI middl...
-
08:11 AM Bug #4288: inetd is missed by check_mk
- inetd is running - but the standard start script is missing.
Also the check_mk config goes to /etc/inetd.conf - th... -
- When installing or configuring the package I get in the system log:
php-fpm[74859]: /rc.start_packages: The comman... -
04:59 AM Bug #4277: squidGuard-squid3 installation Failed after pfSense Update to 2.2
- Having the same problem here, see https://forum.pfsense.org/index.php?topic=87325.0
There is no sha256sum for squi... -
- Pullreq/patch https://github.com/pfsense/pfsense-packages/pull/795
-
- The lcdproc package in the 2.2/FreeBSD-10 release is a PBI and therefore its file access calls go through the PBI pat...
-
- this seems a duplicate of https://redmine.pfsense.org/issues/4282
fixing that would solve this
01/24/2015
-
- also see post https://forum.pfsense.org/index.php?topic=87316.0;topicseen
-
06:52 PM Bug #4282: Vnstat2 1.11 Does Configuration Parser Error
- I can confirm, this bug as well Vnstat2 installs correctly but no logs are ever updated. after going into the shell a...
-
- (Wow, I meant to update the title slightly... I promise, I speak better English)
Obligatory patch to pfsense-packa... -
- Since upgrading to 2.2 (and reinstalling all packages), vnstat2 errors out every time....
-
- Thanks for fixing the project - didn't realize which project I was in when I opened the issue.
I went ahead and op... -
- I've got some other bugs to fix there already (such as updating the mail library). I plan to work on it this week if ...
-
- Simple patch to rename the temporary variable that's conflicting with the global $g....
-
- When a report has multiple graphs, the following errors are generated while generating graphs 2-N...
-
11:42 AM Bug #4277 (Closed): squidGuard-squid3 installation Failed after pfSense Update to 2.2
- hello
after updating pfSense to the last release 2.2 it is impossible de reinstall squidGuard-squid3 with the f... -
03:52 AM Bug #4270: Postfix dashboard widget not working in 2.2
- I think that is expected unless you have received mail, and thus have an sqlite log/database.
See attached image, of... -
- The Postfix dashboard widget shows blank in 2.2, likely needs updates for new PHP.
-
- pointed out here
https://forum.pfsense.org/index.php?topic=84026.msg477208#msg477208
fix would be simply changing... -
- vnstat2 package conf file in /usr/pbi/vnstat-i386/etc/vnstat.conf and /usr/pbi/vnstat-amd64/etc/vnstat.conf not point...
01/23/2015
-
12:42 AM Bug #4256: Squid3 using 100% CPU after install/reboot
- As shown in the log above: some squid processes. The issue is stable to reproduce.
01/22/2015
-
01:19 AM
Bug #4263 (Needs Patch): ntopng: historical feature issue
- Hello,
i can't use the historical feature. when i try to load historical data after setting interface and time inter... -
- which process is using 100% CPU?
01/21/2015
-
03:20 PM Bug #4243: Last squidguard update prevents squid from starting
- The problem appears to be more complex than I first thought.
In a fresh install into virtualbox with squid 2.x and s... -
- 1. Install latest pfSense snapshot;
2. Install Squid3 package;
3. Observe 100% load on CPU oob and after reboot;
...
01/19/2015
-
- On the page pfsense/pkg_edit.php?xml=squidguard_dest.xml&act=edit
for editing a target category the new expression l... -
-
04:37 AM Bug #4228: 2.2 RC nano i386 on Watchguard Firebox
- this is already fixed in the latest release - I'm sorry !
Thomas -
- Issue 1) renders squidguard useless because it bypasses it entirely.
I can't seem to change the bug priority. I wa... -
- I don't believe I am seeing a package update breaking things completely...
squidguard 1.4_4 pkg v.1.9.9 introduces... -
04:28 AM Todo #4029: Update phpsysinfo package
- That are some really good news :) Thank you
-
02:46 AM Todo #4029: Update phpsysinfo package
- Phpsysinfo upcoming version (3.2.1) now works correctly with pfSense 2.1.5 and 2.2.
01/18/2015
-
- The anti-virus feature is working now after adjusting the conf files based on the syntax checks you added to the to t...
01/17/2015
-
09:10 PM Bug #4232: GUI: Interface Menu
- Thanks! It's the same problem.
This could be marked as dupe report. Sorry about that (i searched before i posted.) -
- on Linux, it might be a font problem, since fixed/avoided in 2.2. see #3841
-
- I've tried that.
I've tried two browsers with the same result.
Mozilla Firefox 34.0
Chromium Version 39.0.2171.6... -
- clear your browser cache, it's using outdated pieces
-
- System Menu drops down on Help Menu.
Help Menu is just below System Menu.
This happend when upgradring from;
... -
02:07 PM Bug #3986: BandwidthD can break php-fpm in unknown rare edge case
- Hi,
FYI, I just added some new observations to the forum post, https://forum.pfsense.org/index.php?topic=84642.0
... -
- squid3 does this now. I would close this ticket
01/16/2015
-
- the issue covered by this ticket is fixed, there might be other issues but those are separate and have no relation to...
-
03:17 PM Bug #4114: Squid 3.4.9 transparent proxy broken.
- Issue definitely not "fixed" if you are upgrading from a working config - maybe if you install fresh or use some work...
-
- issue covered here is fixed
-
- the 'Watchguard Firebox with SDEC' driver is missing in the 'LCDproc' package
01/15/2015
-
- thanks Marcello, I merged it.
-
10:05 PM Bug #4197: squid 3.4 anti-virus feature not working
- Typo and freshclam checks fixed on this PullRequest
https://github.com/pfsense/pfsense-packages/pull/788 -
04:31 PM Bug #4114: Squid 3.4.9 transparent proxy broken.
- PfSense: 2.2-RC (amd64) built on Thu Jan 15 12:12:32 CST 2015
Squid: 3.4.10_2 pkg 0.2.4
Confirmed, Package is wor... -
- Please do not close.
I know the original bug was opened on amd64 but I have been following this avidly as it also ef... -
03:26 AM Bug #4114: Squid 3.4.9 transparent proxy broken.
- Confirmed working now. (phew!)
Latest package 0.2.4 transparent proxy is OK.
ICMP pinger disabled in GUI to avoid ... -
11:21 AM Bug #4222: Update to 2.2 RC breaks domU
- Maybe a hook should be added then in the web UI to say, "hey, Xen detected, please make sure you checked (this note) ...
-
- In theory it is possible but given the wide range of disks that have been setup over the years, it is not yet a proce...
-
- Theoretically, could a hook for the referenced shell script be added into the pfSense upgrade process? Or even a sed ...
-
- To elaborate on that a little, the main problem with the disk is that the PVHVM drivers in FreeBSD apparently do not ...
-
- Already documented. It's a Xen/PVHVM thing we can't control.
https://doc.pfsense.org/index.php/Upgrade_Guide#Xen_U... -
- By doing an upgrade to nightly RC build for 2.2 from a working 2.1.5 install, it breaks it in Citrix XenServer. 2.2 s...
-
- Maybe just happened to not hit the issue after another reboot. This: ...
-
10:49 AM
Bug #4220: IPSec dose not work any more.
- *With the new built "Thu January 15 08:01:35 CST 2015
FreeBSD 10.1-RELEASE-p4 "IPsec works great.* -
06:56 AM
Bug #4220 (Closed): IPSec dose not work any more.
- Since update to "2.2-RC (amd64) built on Wed January 14 17:46:28 CST 2015 FreeBSD 10.1-RELEASE-p4 " does not work any...
01/14/2015
-
10:22 PM Bug #4114: Squid 3.4.9 transparent proxy broken.
- Arthur Undisclosed wrote:
> I'm sorry, it seems there are still numerous issues with this package:
>
> - Transpar... -
- I'm sorry, it seems there are still numerous issues with this package:
- Transparent proxy still doesn't work. "TA... -
09:43 AM Bug #4114: Squid 3.4.9 transparent proxy broken.
- Should be fine on 0.2.4
-
05:20 PM Bug #4217 (Resolved): siproxd on pfSense 2.2-RELEASE i386 fails to start
- running on Netgate ALIX router.
siproxd won't start via GUI.
Executing
[2.2-RC][root@router.example.org]/usr/... -
- https://forum.pfsense.org/index.php?topic=86701.msg475980#msg475980
-
- squidguard and squidguard-dev are missing symlinks to shared libs
ln -s /usr/pbi/squidguard-amd64/local/lib/liblda... -
- thanks Marcello and Renato!!
We are almost there, Marcello found a typo that he is correcting in the squid.inc fil... -
- Please try squid3 package version 0.2.4
-
-
11:01 AM Bug #4215: System Patches - no-op "Apply changes" button after test
- Thanks, works :)
-
- Applied in changeset commit:37f34f561e7d537f5f56469de7632097b0058c4a.
-
- 0/ Add some patch.
1/ Click Test link
2/ You get something like:... -
-
- looking good. squid is able to start. I installed the package on a fresh amd64 install. After package install it aut...
01/13/2015
-
- Applied in changeset commit:078fdef02580b396cdad6c21e8e86360e53d338c.
-
- This may fix most issues with squid package on 2.2
https://github.com/pfsense/pfsense-packages/pull/786
I've incl... -
- This may fix most issues with squid package
https://github.com/pfsense/pfsense-packages/pull/786 -
- Fixed on recent versions
-
- It was fixed
-
- It's expected since PBI libraries are contained inside PBI_DIR/lib and binary wrappers setup environment before call it.
01/12/2015
-
- Thanks Marcello! I'll have keep note of this in-case it's brought up on the forums again.. I've always used a higher ...
-
- thanks Marcello.
For those wanting to bind it to something < 1024, they'll have to configure net.inet.ip.portrang... -
- Marcello Silva Coutinho wrote:
> /var/run/squid will be fixed on next package update. This fixes squid -k reconfigur... -
- /var/run/squid will be fixed on next package update. This fixes squid -k reconfigure calls returning "no running copy...
01/11/2015
-
- log file from squid.log. There are a few things going on here..
Squid is unable to bind to port 80 for reverse pro... -
- Please see post https://forum.pfsense.org/index.php?topic=84638.msg474780#msg474780
/var/run/squid.pid isn't being c... -
- fixed
-
08:37 AM Bug #4059: library required by squid3 may be absent
- It looks like the problem originally reported in this issue has been resolved. Thank you, BB
-
- Forgot to mention: Stopping service doesn't kill squid processes:
php-fpm[64022]: /status_services.php: The command ... -
- I can confirm: Squid package is working. But looks like there is an another issue appeared: Squid package heats up my...
-
- perl isn't correctly installed for lightsquid to work. Manually installing perl and adding a couple of symbiotic link...
-
- I haven't posted this on the forum yet but it looks like the symbiotic links aren't being created for the anti-virus ...
01/10/2015
-
- Pfsense: 2.2-RC (amd64) built on Sat Jan 10 03:54:06 CST 2015
Squid: 3.4.10_2 pkg 0.2.2
Installation works fine ... -
- Pfsense: 2.2-RC (amd64) built on Sat Jan 10 03:54:06 CST 2015
Squid: 3.4.10_2 pkg 0.2.2
Issue with transparent p... -
- Just tested the new package, still transparent proxy does not work. In the logs I get "TAG_NONE/400" and the client g...
01/09/2015
-
- this seems to be working, will leave for others' confirmation.
-
- Please try pkg version 0.2.2
-
- Please try pkg version 0.2.2
01/08/2015
-
- package build options are updated and pbi rebuild.
01/05/2015
-
02:37 AM Feature #3685: haproxy listener ip from alias
- Hi,
I had added before this feature to the my own haproxy.
Thanks for the feature.
01/04/2015
-
12:27 PM Feature #3685: haproxy listener ip from alias
- I've included some ability to use aliases, and add multiple ip's in 1 frontend. Does this satisfy your needs?
-
- Using the 'shared frontends' its possible to define acl's for different backends, this should allow for 'most' common...
01/02/2015
-
- Applied in changeset commit:22c884d104498547356e6144b6a0c22300085b22.
-
08:06 AM
Bug #3729: Bacula-client Services not running
- Can confirm this still exists in 2.1.5.
-
01/01/2015
-
09:15 PM Bug #4078: NUT fails to start with USB
- This issue can be closed. It is addressed by 4118.
12/31/2014
-
09:09 AM Bug #4168: bandwithd result pages are public accessible
- Well, in that case you should at least put a big fat warning on the docs. I am new to pfSense and when I add a module...
-
- That is a known issue with all add-on packages which include their own web interfaces. Unless they have their own pro...
-
- The result pages produced by bandwithd can be accessed without a login when knowing the url (which does not contain a...
-
03:29 AM Bug #4167 (Resolved): Lightsquid package does not remove crontab entries
- When removing the Lightsquid package, it did not remove the crontab entries, removing the package should not do this?...
12/30/2014
-
- The first attempt to send a guest shutdown results in: ...
Also available in: Atom