Activity
From 08/09/2012 to 09/07/2012
09/07/2012
-
05:40 PM Bug #2628 (Rejected): Lost Conection Wan
- This is not a support ticket system. Please use the forum or mailing list for support issues.
-
05:35 PM Bug #2628 (Rejected): Lost Conection Wan
- Hello good afternoon I have a problem I get disconnected from the WAN side of the probe reinstalling pfsense and leav...
-
03:51 PM
Bug #2627 (Resolved): Old delegated prefixes are not removed from the LAN interface
- When the LAN tracks the WAN via DHCPv6 Prefix Delegation and the WAN bounces, thus receiving a new delegated prefix, ...
-
- AT&T is doing this now on their network handing off DHCP with a /32 mask with certain uverse gear like the NVG510, so...
-
02:45 PM Bug #2626: Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
- Haha, ok I had it right the first time. The key sentence from the syslog.conf man page is:
If a received message ... -
- Er... upon further consideration, I don't actually know what is going on. Snort emits daemon.notice, and dnsmasq emit...
-
- Took me a while to hunt this down, and it's the same issue as reported in:
http://forum.pfsense.org/index.php?topi...
09/06/2012
-
- This may have been corrected by the fixes for ticket #2490 - please re-test on a current snapshot.
-
02:06 PM Bug #2625: Inconsistent behavior with Alias info popup
- Those popups contain Edit links. If you somehow get a mouseout event handler on the link to close the tooltip [which...
-
- Applied in changeset commit:c184fa273f8f575266addc38f838a31b763d3d1d.
-
- Applied in changeset commit:00ad21b9d71a5b5cda116a6a30293999847e39e4.
-
- Applied in changeset commit:59167b10fbe27b37c3fe9683bd58c24a4abdb732.
-
- Applied in changeset commit:17c0bb50f81011cba034af5593efa0be3d27df1a.
-
- Hopefully commit:17c0bb50 fixes this.
-
- When you mouseover an alias when viewing firewall rules, nat rules, and so on, the info box pops up showing the addre...
-
- Sure, we'd be open to including the patch.
-
04:31 AM Feature #2622: Allow DHCP without a range so that only static mappings may be used on an interface
- Hello,
Thanks for your response.
If I provide a patch and test this feature (dhcp without pool), is there any cha... -
- Applied in changeset commit:b91440888e0c2bd398c89155d36c4a9d050c5caa.
-
04:45 AM pfSense Packages Bug #2624 (Resolved): Varnish3 Package + GUI seems broken
- The Varnish3 Package + GUI seems broken. ACL is Corrupt.
Version: Latest PFSense 2.1 DEVELOPMENT snapshot
When cl...
09/05/2012
-
06:36 PM Feature #1009: Active Directory group membership checking
- Hi,
ive made a new auth.inc that works for me on "2.1-BETA0 (i386) built on Sun Sep 2 18:21:50 EDT 2012 " based on s... -
06:19 PM Bug #2623 (Closed): IPsec VPN - Phase-2 entries count wrong for disabled entries
- webGUI IPsec VPN
On disabled (greyed-out) VPN tunnels, the count of Phase-2 entries is incorrect (it always shows ... -
05:27 PM Bug #2555: check_reload_status consumes 100% CPU usage
- I confirm the bug at least on all recent 64bit builds and in the last too:
2.1-BETA0 (amd64)
built on Tue Sep 4 16:... -
- I posted a HEADS UP message on the package forum.
http://forum.pfsense.org/index.php/topic,53308.0.html
Addition... -
08:57 AM pfSense Packages Bug #2621: Update NUT due to CVE-2012-2944
- (the box that I'd need to use NUT)
-
- Awesome Jim - I try to catch all of your explanations :-)
Let me know if you need a guinea pig, the box won't arri... -
- Updated binaries, reinstalled, works fine for me with my APC Back-UPS ES 450. I imagine it should work for others als...
-
- No objections, but someone would need to check/test to ensure the config file is compatible and make any necessary ch...
-
- NUT can be remotely crashed as of CVE-2012-2944
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2944
Any o... -
- Not a bug, but a missing feature.
Allowing DHCP without a defined range would be the only feasible way to do this,... -
- Hello,
I have a range managed by a DHCP server. All the hosts in this range have a static DHCP assignment.
Each t... -
04:13 AM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- Hi Robin,
You opened the bug for ESXi 5.0 and above you're talking about VMware build 768111 which seems to be VMWar... -
01:10 AM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- I see, but these people seem to have the same problem:
http://forum.pfsense.org/index.php?topic=41647.0
09/04/2012
-
11:09 PM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- it's not a general problem, this very site runs behind a firewall in the latest version of ESX and it can push 1 Gbps...
-
- So you'll reject that this is a bug?
I can recreate this problem 100% of the time.
I'll say its a problem that an... -
- not a general problem
-
- not a general problem hence not a legit bug report. Hacom can follow up with us via commercial support to test that s...
-
09:38 PM Bug #2620 (Rejected): Low outbound bandwidth
- 35/35 fiber line. Full bandwidth with 2.0.1. Upgrading to 2.1 Beta0 upload speeds dropped to 5mb max. No traffic s...
09/03/2012
-
12:52 PM Feature #2588: Import latest Intel Ethernet card drivers for FreeBSD 8-STABLE
- Tested r235553 with 82574L on clean 8.3, looks like it really helps.
09/02/2012
-
06:45 AM Bug #2619 (Resolved): DHCP lease delete doesnt work
- i use the dhcp server with static arp and deny unknown clients ticked but suppose when those r unticked, it allows cl...
09/01/2012
-
03:15 PM Bug #1974: Captive Portal RADIUS accounting bytes wrong
- I don't think this has been solved yet. I downloaded "pfSense-LiveCD-2.1-BETA0-i386-20120831-1027.iso.gz" from snapsh...
-
- Forgot to specify some stuff:
I got two installations, one in prod and one in test.
The one in test was the one i... -
- Hi,
I'm having trouble with running pfsense (i386 and amd64) at vSphere ESXi servers.
When I do a speedtest betwe...
08/31/2012
-
08:33 PM Bug #2617 (Resolved): resolv.conf missing ipv6
- I posted in the forum about this a while back. resolv.conf doesn't get the ipv6 entries from my ISP. I don't think th...
08/30/2012
-
- on further study, once u create a rule with a gateway and then when u try to edit then it doesnt appear, other rules ...
-
- i have the same issue
when u edit gateway doesnt appear
when u add new rule based on old gateway doesnt appear
w... -
- i think the ticket for this no longer exists so does it mean its fixed?
08/29/2012
-
09:17 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- For a start, this code looks odd in /etc/inc/filter.inc at 3015:
@ if($timeday['month'])
$month = $timeday['mon... -
04:08 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- That is in fact what i already did, nevertheless the scheduler fired off on 28 August while it was set as you see the...
-
- You can go back under Diagnostics > Backup/Restore on the Config History tab and get an older version of your config ...
-
- Attached is a screengrab from the scheduler section, but i have to change it now for a scheduled streaming event tomo...
-
02:17 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- I would need to see the scheduler section to validate that nothing is missing with that.
-
07:25 PM Bug #2555: check_reload_status consumes 100% CPU usage
- ...
-
- When this happens, please capture the full output of "ps uxawww" and attach it here. Odds are there are a batch of pr...
-
- Is this still the same with latest snaps?
-
- Can you please try with a recent snapshot.
The snapshots back there had some issues with how CP config was being app... -
-
- The newer miniupnpd does support it, but produces errors when it's enabled and run. It compiles OK, but doesn't funct...
-
-
-
- Works for me, and many others on the forum report it to be working now.
-
-
-
-
-
-
- No problems with CARP+IPv6 on several clusters, seems to be fine.
-
- This is fixed from all the tests I've tried, and others on the forum have reported it to be fixed.
-
- Multiple sources confirm this is fixed.
-
-
10:57 AM Bug #2606: Unable to create ESP port forward
- Updated to the latest nightly today (8/29) and was able to successfully add a port forward using the ESP protocol.
08/28/2012
-
- It may be improved a little but it's still slow even just running mount, no refcounts involved.
Still only affects c... -
- This should have gonne away with the fixes that went in for reference counting fixes.
-
- Applied in changeset pfsense-tools:commit:cba403d0126da81cd3fec30eed295548e4dbb445.
-
07:06 AM Bug #2613: Incoming traffic on a vlan is not seen
- After reading all that I've done and again carefully reading epek's answer I must admit he was right.
Setting the ... -
With changes done to the reference counting code this should be fixed.-
-
- Applied in changeset commit:0d0558195ed9a0df50e8bce1fd52419921b0e30e.
-
06:50 AM Bug #2605: Filter rule are not created correctly
- yes. This patch works. Thanks for the quick turn around!
(tested with 2.1-BETA0 (amd64)
built on Mon Aug 27 14:5... -
-
- Applied in changeset commit:6ab59b35ec999c576a95317985b6901428c143bc.
-
- No i can't give my config - but ill add the scheduled tasks and hope that this is related to the scheduler menu item....
-
- Can you provide some examples from your config to debug this easily?
-
- I use Scheduler to trigger many rules, today the rules were all activated
The last date that was still in there was...
08/27/2012
-
- If you change the test to this:...
-
- Traffic with a vlan tag is not seen on the vlan interface but is seen on the master interface.
traffic with a vlan... -
07:01 AM Bug #2612: PPTP client not connecting remote IPSEC site
- this conf was working before upgrade,can you please replicate this issue?do you want extra info from me?
-
- This is a support/configuration issue, not a bug. Please use the forum or mailing list.
-
- this issue asked by me on August 17 2012 under PPTP subcategory,but any answer yet
-
- I got an IPSEC tunnel between Site1 and Site2. Both running pfSense 2.0.1-RELEASE (amd64)
PPTP clients connect to S...
08/26/2012
-
08:40 PM Bug #2611: all gateway not present when editing existing rule.
- Config attached.
it's a fresh install from 1-2 weeks with the 2.1 branch. updated to Sat Aug 25 13:20:25 EDT 2012 ... -
- Make sure you've read and followed the stickies on the 2.1 and IPv6 boards on the forum - sounds like you didn't edit...
-
- not seeing that, need more info, and/or a backup of your config attached.
-
- When creating, i have all my gateway, i can select the correct one, everything works fine. if i save it, then edit th...
-
- kitdavis reported in forum, that for amd64 build problem is also solved.
http://forum.pfsense.org/index.php/topic,51... -
- Due to various changes in geom and how things are checked, a whole-disk gmirror may break when the base OS is updated...
-
09:23 AM Feature #2609 (Needs Patch): Support for ActiveDNS
- ActiveDNS is a South African service only aimed at serving South African
customers who use the cheaper "local-only" ... -
- in the north america page we have :
'Alias Only' - Will create alias pfBlockerNorth America with selected countrie...
08/25/2012
-
- What design is preferred?
Allow a package to specify both <internal_name> and <service_name> in case they are differ... -
- sorry for not responding earlier (haven't had a lot of time to experiment with pfsense). Just to push back a bit here...
-
02:00 AM Feature #2607: CARP Traffic affected from Traffic Shaping
- what do you mean bad user-defined config? I'm in a multi-WAN/multi-LAN setup. CARP is just set upped in my master and...
-
- been waiting for this fix since a year now
-
- will this be fixed or is it fixed in 2.1?
08/24/2012
-
- not a bug, you have a bad user-defined config. it's certainly possible to break CARP with certain shaper configs. Don...
-
- CARP is freaking out, some VIPs were master on a box and some others are on the backup box. This started to happen wh...
-
10:22 PM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Tried updating to the latest snapshot tonight and immediately noticed issues related to the ARP on a VLAN. Looking to...
-
- When attempting to create a port forward rule for the ESP protocol, pfSense complains a destination port has not been...
-
- After upgrading to the latest snapshot, the filter rules refuse to load due to an error:
----
There were error(s)... -
- FIXED for the D2500CC board, at least on x86 architecture.
Waiting confirmation for the x64 in the forum
08/23/2012
-
10:22 PM Feature #814: GUI should allow to bind openvpn on different ip same port
- Vote for this feature.
-
- Applied in changeset pfsense-tools:commit:708b07d63bbdc49b2f56eca5cb3c8862f4c33a27.
-
- Applied in changeset pfsense-tools:commit:2cce75c70fa831a4356184f88cefd6a3b65853c1.
-
- Applied in changeset commit:c4cb635d11cd82e98be9d16d9abf4fc8b4a35c84.
-
- Applied in changeset commit:c051bf14000857ffff97ab80273a1a0ea6b62c7b.
-
- Applied in changeset commit:1032ab47c73871993e34446b84767efd235cfd05.
-
- Applied in changeset commit:d4f8cb1ad30c15e34a47f2d5c27d0d6ca09b5e2f.
-
- Applied in changeset commit:d427980c76cd11beeb923c939e1924fecf532a08.
-
- Applied in changeset commit:c714a1afdae4ce79dcb51e07787303b64ccf212a.
-
- Applied in changeset commit:e39b6feb28bfbd72d0dca923bdc2d458b84476bd.
-
06:41 AM Bug #1841: TCP state issue when traffic passing through a GRE tunnel within IPSEC
- Hi! Thanks for the info - i will configure that as in one of my next projects, as i have to configure some tunneling ...
08/22/2012
-
- Fixed by pfsense Github pull request 200
-
- Startup and shutdown code currently has lines like:
start_service($package['name']); /* rc.start_packages line 57 */...
08/21/2012
-
03:11 PM pfSense Packages Bug #2602 (Closed): BandwidthD - Reported Traffic / Usage is approximately Double real amount
- 2.0.1-RELEASE (amd64)
built on Mon Dec 12 18:43:51 EST 2011
FreeBSD 8.1-RELEASE-p6
bandwidthd 2.0.1.3
AMD PhenomI...
08/20/2012
-
06:00 AM Bug #2401: Mounting read-only after mounting read-write can be very slow on NanoBSD
- Hi,
I've been having this problem with NanoBSD too. However, I just noticed that when I updated Safari to v6.0 the p...
08/16/2012
-
01:30 PM Bug #2600: DHCP Server different parameter order in config.xml interrupts peer groups
- Hello Jim
I startet with an "empty" slave and configured interfaces and DHCP before initiating CARP.
Then it was... -
- Do you have the HA sync settings set to copy the DHCP settings from master to slave? If so it should be copying that ...
-
- I have installed two pfsense (2.1) in CARP mode which works fine exceptionally the DHCP server. I had always interrup...
-
- We use pfsense in an apartment hotel to organize the network. As portal server we use Antamedia at the moment. We wan...
-
- The auto-added reply-to on WAN rules in combination with IPv4+v6 rules breaks v6 connectivity, as the v4 IP is includ...
08/15/2012
-
11:22 PM Bug #2597 (Resolved): Unable to create GRE port forward
- When attempting to create a port forward rule for the GRE protocol, pfSense complains a destination port has not been...
-
10:02 PM Bug #2582: OpenVPN service won't start after changing the IP of interface
- In addition to this, it seems that the interface selection does not work with virtual IPs at the moment (it still ass...
-
- This is an rather large issue for me, since my ISP is using HSRP for redundancy on IPv6, and they provide me a link-l...
08/14/2012
-
- There has been a commit to the FreeBSD source which fixes the video corruption.
http://freshbsd.org/commit/freebsd... -
- probably better off posting this to the packages board on the forum, the maintainers tend to not look here.
-
09:21 PM pfSense Packages Bug #2591 (Closed): Squid3 can't listen on a CARP VIP
- The squid3 package allows syncing between HA peers, but .../squid.xml only allows selection of physical interfaces, a...
-
- Duplicate of #2588
-
- http://forum.pfsense.org/index.php/topic,52448.0.html
There have been numerous commits to the FreeBSD Intel Ethern... -
- Since it's a part of the base system, it seems reasonable to add Services->NTP and Services->SNMP config syncing to t...
-
- Squid3 pkg only allows for listening on a single interface; if I want to have squid running on both LAN and OPT1, say...
-
- Forgot to add screencap.
-
- The OVA file I just downloaded from http://snapshots.pfsense.org/FreeBSD_RELENG_8_3/amd64/pfSense_HEAD/virtualization...
-
- For informational purposes, this bug is still present. If a limiter is applied on an IPv6 rule, the traffic no longer...
08/13/2012
-
- This is definitely an issue still.
If you are in a carp setup, setting the voucher sync on the slave as directed in ...
08/12/2012
-
07:57 PM Bug #2589: Unbound integration not finished
- have not gotten it to show up in google or redmine search
-
- unbound not likely to make 2.1. there's a feature ticket open somewhere on it.
-
- some of unbounds files are in place but the are no options for gui setup at this point and package option for 2.1 has...
08/11/2012
-
05:52 PM Bug #754: hifn driver and AES192 and 256
- Just would like to confirm that fairly identical results are produced on my ALIX.6F2 with my soekris VPN1411 (HIFN 79...
-
02:44 PM Feature #2439: XEN Para-virtualized Drivers Support
- Jim P wrote:
> Plenty of good reasons to run a virutalized firewall - that debate doesn't belong on this ticket thou... -
- Plenty of good reasons to run a virutalized firewall - that debate doesn't belong on this ticket though.
The virtio ... -
- It doesn't make any sense to have your routing and firewall platform being run on a virtualized layer especially in a...
-
- +1
-
- Re-posting here per jimp's suggestion:
In recent weeks there have been numerous commits to the FreeBSD Intel Ether... -
- You read my mind.
-
- Indeed, this would be really helpful.
08/10/2012
-
07:05 PM
Feature #2587 (Closed): Add IPv6 Privacy settings.
- IPv6 Privacy addresses are not enabled by default.
Settings seem to be missing. Suggest they be added and default... -
- Please start a forum thread for support issues. This most definitely works (we do it all the time). Others on the for...
-
12:08 PM Bug #2586 (Rejected): Package Repository URL not honored
- I have a pfSense deployment that needs the packages in the package system but is not connected to the internet. I hav...
08/09/2012
-
- Below is the steps to replicate the issue:
1) Assign an IP address to a WAN interface.
2) Create a OpenVPN server a... -
- I know that's not true, lots of dynamic WANs out there running OpenVPN that update correctly. What exactly are you do...
-
10:48 AM
Bug #2585 (Resolved): FreeDNS.afraid.org DDNS client sends in clear text
- FreeDNS.afraid.org DDNS client sends the "Authentication Token" (update URL) in clear text. The FreeDNS.afraid.org we...
-
05:09 AM Bug #2584 (Closed): Import server certificate - Bad Issuer
- Dear Pfsense support,
We have migrated to the latest version of Pfsense (from version 1.x to version 2.0.1-RELEASE)....
Also available in: Atom