Activity
From 08/16/2012 to 09/14/2012
09/14/2012
-
04:36 PM Revision 611b65a8: Force resync of vpns and dns even if the IP doesn't change in rc.newwanip, since we could be doing failover/failback for these services.
-
04:36 PM Revision 140f30ea: Add note about mac matching and media type.
-
12:10 PM Revision 80d30a83: Add some safety checks against empty entries
-
07:42 AM Feature #2241 (Feedback): DHCP - prevent dhcpd from handing out leases to certain MAC addresses
- Implemented in commit:1f1a08c (and a fix in commit:80d30a8)
-
02:26 AM pfSense Packages Bug #2632 (Rejected): Intel Quad Gigabit ET2 & Intel Quad Gigabit I350 igb could not setup receive structures
- we don't control the drivers, test with newer base FreeBSD versions and report the issues to the mailing list net at ...
-
01:55 AM pfSense Packages Bug #2632: Intel Quad Gigabit ET2 & Intel Quad Gigabit I350 igb could not setup receive structures
- I forgot to mention for each interface that is active we recieve random "igb(x) could not setup receive structures" e...
-
01:51 AM pfSense Packages Bug #2632 (Rejected): Intel Quad Gigabit ET2 & Intel Quad Gigabit I350 igb could not setup receive structures
- There appears to be some sort of igb driver malfunction with 2.0.1 AMD64. We are using the 4GB NanoBSD vga build. We ...
-
01:15 AM Revision 1f1a08c8: Allow/deny access to DHCP by partial MAC matching.
09/13/2012
-
04:52 PM Revision e288ddb1: Make the openvpn resync less intrusive, only trigger this if the OpenVPN interface is actually a gateway group name. Otherwise we skip.
-
04:49 PM Revision 017817c2: Make the gateway group member check a boolean, might convert to something else at a later time so we could check group memberships.
- Also launch the dyndns configure if the dyndns interface is a gateway group name, could check membership later if we ...
-
04:49 PM Revision 2223aa95: Always prepend the hostname we are working on
-
03:46 PM Feature #2631: Highlight unapplied changes
- This would be extremely hard to do.
You can always see a diff of the existing config to the previous - Diag > Back... -
03:43 PM Feature #2631: Highlight unapplied changes
- Sorry for forgetting to include the version. It is version: 2.0.2-RC4 (amd64), and this is specifically a request fo...
-
03:37 PM Feature #2631 (Needs Patch): Highlight unapplied changes
- I have multiple users with access to our pfsense system, and this morning I found a large red warning in the GUI indi...
-
05:18 AM Revision 768eb89c: Make sure we process dyndns interfaces that use a failover group when processed from rc.newwanip, which just passes a interface.
-
05:04 AM Revision cdb0df65: Add function that checks if the interface is part of a gateway group.
-
05:02 AM Revision 1be0e2da: Reference the correct variable here, it was broken before and could never have worked.
09/12/2012
-
04:45 PM Revision ed6df99c: Use a better link here.
-
04:45 PM Revision 82f6b8e0: Use a better link here.
-
04:26 PM Revision bca84dfb: Don't skip over wrap_vga here.
-
04:23 PM Revision c832f6bf: Remove the filter configure call as this could otherwise lead to a recursive filter configure.
-
04:18 PM Revision 0066932f: Print a nice large warning on the PPTP page about it no longer being considered secure.
-
04:18 PM Revision 0888bdfa: Print a nice large warning on the PPTP page about it no longer being considered secure.
-
03:44 PM Revision 1a6f5266: Bail here so we don't make invalid rules for IPsec if this is empty.
-
11:47 AM Feature #2552 (Resolved): Set the timezone in setup_php_ini.sh
09/11/2012
-
04:47 PM Revision 8736e7a1: Merge pull request #221 from j-white/master
- Fixed the rendering in IE for the password management page.
-
03:03 PM Revision fa6a3d4d: Fixed the rendering in IE. Moved the head section out of the body.
-
08:32 AM Feature #2630 (Rejected): Add SSHD logging on a new SSHD tab under STATUS > SYSTEM LOG
- Per jimp's request in forum: http://forum.pfsense.org/index.php/topic,53503.0.html
Please add a new SSHD tab that ...
09/10/2012
-
06:45 PM Revision 2643df8d: Merge pull request #220 from PiBa-NL/master
- firewall log, allowing the showing of applied rule description with optional setting
-
03:32 PM Revision 32f8552e: Show/hide toggle
-
02:32 PM Revision 52b27268: Added a setting for configuring the firewall log to either:
- -Not load descriptions
-Show descriptions in a column
-Show descriptions on a second row (after a click on 'show desc... -
01:59 PM Feature #2629 (Feedback): Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
- I approved the request, it looks good now, thanks!
The show/hide toggle is also a good addition, and the three-way... -
10:35 AM Feature #2629: Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
- Thanks for your comments.
Made a few modifications and added a setting to allow for keeping old behavior.
And mad... - 01:55 AM Revision 18be4037: remove bunk input validation
09/09/2012
-
05:19 PM Feature #2629: Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
- There are people with thousands of rules in the evaluated ruleset, and there are also people on very slow hardware (t...
-
03:31 PM Feature #2629: Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
- Would layout attached as new screenshot be ok? !New layout proposal!
As for the performance, there is a 2000 max r... -
11:12 AM Feature #2629: Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
- I'm not opposed to having that information readily accessible, but that format isn't very easy to read. I don't know ...
-
10:39 AM Feature #2629 (Resolved): Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
- Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw ...
-
07:15 AM Bug #2527: Miniupnpd starts but isn't working
- jim thank you for staying on top of this!!! Works great now
-
07:12 AM pfSense Packages Bug #1907: snort
- its there for 2.1 beta
-
07:10 AM pfSense Packages Bug #2002: snort
- this has been resolved as far as I know
09/08/2012
-
09:41 PM pfSense Packages Bug #2602: BandwidthD - Reported Traffic / Usage is approximately Double real amount
- Yup. Problem is still there.
Is this the right bug tracker to be addressing issues with the BandwidthD package for p... -
12:41 PM Revision a6d5e043: Changed firewall log to show the applied rule description directly on screen, also layout optimization for "Show raw filter logs".
09/07/2012
-
05:40 PM Bug #2628 (Rejected): Lost Conection Wan
- This is not a support ticket system. Please use the forum or mailing list for support issues.
-
05:35 PM Bug #2628 (Rejected): Lost Conection Wan
- Hello good afternoon I have a problem I get disconnected from the WAN side of the probe reinstalling pfsense and leav...
-
03:51 PM Bug #2627 (Resolved): Old delegated prefixes are not removed from the LAN interface
- When the LAN tracks the WAN via DHCPv6 Prefix Delegation and the WAN bounces, thus receiving a new delegated prefix, ...
-
02:48 PM Feature #972: Allow adding gateways outside of interface subnet
- AT&T is doing this now on their network handing off DHCP with a /32 mask with certain uverse gear like the NVG510, so...
-
02:45 PM Bug #2626: Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
- Haha, ok I had it right the first time. The key sentence from the syslog.conf man page is:
If a received message ... -
05:26 AM Bug #2626: Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
- Er... upon further consideration, I don't actually know what is going on. Snort emits daemon.notice, and dnsmasq emit...
-
05:08 AM Bug #2626 (Resolved): Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
- Took me a while to hunt this down, and it's the same issue as reported in:
http://forum.pfsense.org/index.php?topi...
09/06/2012
-
06:47 PM Revision c184fa27: fix imbalanced HTML tags
- hopefully continues to fix #2625 but no guarantees.
-
06:47 PM Revision 00ad21b9: fix more imbalanced HTML tags.
- hopefully continues to fix #2625 but no guarantees.
-
06:47 PM Revision 59167b10: fix some imbalanced HTML tags
- hopefully this will fix #2625 but this needs to be done anyway.
-
06:46 PM Revision d329d587: a few coding indentation/style fixes.
-
06:27 PM Revision b9144088: Correct this function call, OpenVPN client killing works again, fixes #2554
-
05:46 PM Revision 17c0bb50: Inconsistent behavior with Alias info popup
- hopefully fixes #2625
http://redmine.pfsense.org/issues/2625 -
05:08 PM Revision 73567959: never call parseInt without a radix.
-
02:48 PM Bug #2074 (Feedback): Changing interface IP changes interface assignment as well
- This may have been corrected by the fixes for ticket #2490 - please re-test on a current snapshot.
-
02:06 PM Bug #2625: Inconsistent behavior with Alias info popup
- Those popups contain Edit links. If you somehow get a mouseout event handler on the link to close the tooltip [which...
-
01:50 PM Bug #2625: Inconsistent behavior with Alias info popup
- Applied in changeset commit:c184fa273f8f575266addc38f838a31b763d3d1d.
-
01:50 PM Bug #2625: Inconsistent behavior with Alias info popup
- Applied in changeset commit:00ad21b9d71a5b5cda116a6a30293999847e39e4.
-
01:50 PM Bug #2625: Inconsistent behavior with Alias info popup
- Applied in changeset commit:59167b10fbe27b37c3fe9683bd58c24a4abdb732.
-
12:50 PM Bug #2625: Inconsistent behavior with Alias info popup
- Applied in changeset commit:17c0bb50f81011cba034af5593efa0be3d27df1a.
-
12:48 PM Bug #2625 (Feedback): Inconsistent behavior with Alias info popup
- Hopefully commit:17c0bb50 fixes this.
-
12:17 PM Bug #2625 (Rejected): Inconsistent behavior with Alias info popup
- When you mouseover an alias when viewing firewall rules, nat rules, and so on, the info box pops up showing the addre...
-
01:44 PM Feature #2622: Allow DHCP without a range so that only static mappings may be used on an interface
- Sure, we'd be open to including the patch.
-
04:31 AM Feature #2622: Allow DHCP without a range so that only static mappings may be used on an interface
- Hello,
Thanks for your response.
If I provide a patch and test this feature (dhcp without pool), is there any cha... -
01:40 PM Bug #2554 (Feedback): "kill client" functionality broken on OpenVPN status page
- Applied in changeset commit:b91440888e0c2bd398c89155d36c4a9d050c5caa.
-
12:22 PM Revision 9500537d: Don't add ldapcfg to racoon.conf since we're not using racoon's built-in LDAP support now. Moving to external script-based auth, see ticket #1112
-
04:45 AM pfSense Packages Bug #2624 (Resolved): Varnish3 Package + GUI seems broken
- The Varnish3 Package + GUI seems broken. ACL is Corrupt.
Version: Latest PFSense 2.1 DEVELOPMENT snapshot
When cl...
09/05/2012
-
06:52 PM Revision b16d666d: No need for these other lines on nanobsd, and it can interfere with booting on some devices.
-
06:36 PM Feature #1009: Active Directory group membership checking
- Hi,
ive made a new auth.inc that works for me on "2.1-BETA0 (i386) built on Sun Sep 2 18:21:50 EDT 2012 " based on s... -
06:19 PM Bug #2623 (Closed): IPsec VPN - Phase-2 entries count wrong for disabled entries
- webGUI IPsec VPN
On disabled (greyed-out) VPN tunnels, the count of Phase-2 entries is incorrect (it always shows ... -
05:27 PM Bug #2555: check_reload_status consumes 100% CPU usage
- I confirm the bug at least on all recent 64bit builds and in the last too:
2.1-BETA0 (amd64)
built on Tue Sep 4 16:... -
09:06 AM pfSense Packages Bug #2621: Update NUT due to CVE-2012-2944
- I posted a HEADS UP message on the package forum.
http://forum.pfsense.org/index.php/topic,53308.0.html
Addition... -
08:57 AM pfSense Packages Bug #2621: Update NUT due to CVE-2012-2944
- (the box that I'd need to use NUT)
-
08:57 AM pfSense Packages Bug #2621: Update NUT due to CVE-2012-2944
- Awesome Jim - I try to catch all of your explanations :-)
Let me know if you need a guinea pig, the box won't arri... -
08:54 AM pfSense Packages Bug #2621 (Feedback): Update NUT due to CVE-2012-2944
- Updated binaries, reinstalled, works fine for me with my APC Back-UPS ES 450. I imagine it should work for others als...
-
07:17 AM pfSense Packages Bug #2621: Update NUT due to CVE-2012-2944
- No objections, but someone would need to check/test to ensure the config file is compatible and make any necessary ch...
-
02:53 AM pfSense Packages Bug #2621 (Resolved): Update NUT due to CVE-2012-2944
- NUT can be remotely crashed as of CVE-2012-2944
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2944
Any o... -
09:01 AM Feature #2622: Allow DHCP without a range so that only static mappings may be used on an interface
- Not a bug, but a missing feature.
Allowing DHCP without a defined range would be the only feasible way to do this,... -
08:53 AM Feature #2622 (Needs Patch): Allow DHCP without a range so that only static mappings may be used on an interface
- Hello,
I have a range managed by a DHCP server. All the hosts in this range have a static DHCP assignment.
Each t... -
04:13 AM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- Hi Robin,
You opened the bug for ESXi 5.0 and above you're talking about VMware build 768111 which seems to be VMWar... -
01:10 AM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- I see, but these people seem to have the same problem:
http://forum.pfsense.org/index.php?topic=41647.0
09/04/2012
-
11:09 PM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- it's not a general problem, this very site runs behind a firewall in the latest version of ESX and it can push 1 Gbps...
-
05:19 PM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- So you'll reject that this is a bug?
I can recreate this problem 100% of the time.
I'll say its a problem that an... -
02:03 PM pfSense Packages Bug #2618 (Rejected): High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- not a general problem
-
11:03 PM Bug #2620 (Rejected): Low outbound bandwidth
- not a general problem hence not a legit bug report. Hacom can follow up with us via commercial support to test that s...
-
09:38 PM Bug #2620 (Rejected): Low outbound bandwidth
- 35/35 fiber line. Full bandwidth with 2.0.1. Upgrading to 2.1 Beta0 upload speeds dropped to 5mb max. No traffic s...
-
08:38 PM Revision 4c9e22b9: Add another test here for Nano+VGA to preserve the console selection.
-
03:58 PM Revision 744306c6: Fix up tcpdump for pflog stop/start a little, consolodate code, and restart tcpdump for pflog when saving log settings.
09/03/2012
-
12:52 PM Feature #2588: Import latest Intel Ethernet card drivers for FreeBSD 8-STABLE
- Tested r235553 with 82574L on clean 8.3, looks like it really helps.
09/02/2012
-
06:45 AM Bug #2619 (Resolved): DHCP lease delete doesnt work
- i use the dhcp server with static arp and deny unknown clients ticked but suppose when those r unticked, it allows cl...
09/01/2012
-
03:15 PM Bug #1974: Captive Portal RADIUS accounting bytes wrong
- I don't think this has been solved yet. I downloaded "pfSense-LiveCD-2.1-BETA0-i386-20120831-1027.iso.gz" from snapsh...
-
05:55 AM pfSense Packages Bug #2618: High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- Forgot to specify some stuff:
I got two installations, one in prod and one in test.
The one in test was the one i... -
05:40 AM pfSense Packages Bug #2618 (Rejected): High CPU load, low troughput - VMware ESXi (vSphere 5.0)
- Hi,
I'm having trouble with running pfsense (i386 and amd64) at vSphere ESXi servers.
When I do a speedtest betwe...
08/31/2012
-
08:33 PM Bug #2617 (Resolved): resolv.conf missing ipv6
- I posted in the forum about this a while back. resolv.conf doesn't get the ipv6 entries from my ISP. I don't think th...
08/30/2012
-
10:35 AM Bug #2611: all gateway not present when editing existing rule.
- on further study, once u create a rule with a gateway and then when u try to edit then it doesnt appear, other rules ...
-
10:31 AM Bug #2611: all gateway not present when editing existing rule.
- i have the same issue
when u edit gateway doesnt appear
when u add new rule based on old gateway doesnt appear
w... -
06:49 AM Revision d587bbf9: Simplify schedules code and some styly nits
-
06:46 AM Revision daa06fb7: Simplify schedules code and some styly nits
-
06:36 AM Revision f68a7f71: Merge pull request #217 from phildd/master
- Month matching for scheduler rules
-
05:30 AM Bug #2254: uPNP breaks limiters
- i think the ticket for this no longer exists so does it mean its fixed?
- 02:11 AM Revision 50b3fc5a: Month matching for scheduler rules
- Fix some obvious things in the firewall scheduled rules code. If a user has some rules with a month specified and som...
08/29/2012
-
09:17 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- For a start, this code looks odd in /etc/inc/filter.inc at 3015:
@ if($timeday['month'])
$month = $timeday['mon... -
04:08 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- That is in fact what i already did, nevertheless the scheduler fired off on 28 August while it was set as you see the...
-
02:58 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- You can go back under Diagnostics > Backup/Restore on the Config History tab and get an older version of your config ...
-
02:49 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- Attached is a screengrab from the scheduler section, but i have to change it now for a scheduled streaming event tomo...
-
02:17 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- I would need to see the scheduler section to validate that nothing is missing with that.
-
07:25 PM Bug #2555: check_reload_status consumes 100% CPU usage
- ...
-
02:45 PM Bug #2555: check_reload_status consumes 100% CPU usage
- When this happens, please capture the full output of "ps uxawww" and attach it here. Odds are there are a batch of pr...
-
05:37 PM Revision 13f334f3: Be consistent on formatting to easy reading
-
05:30 PM Revision 06498591: Try to remove old states when a DHCP IP changes, might be related to ticket #1629 and also "unable to allocate llinfo" messages from states through an old gateway.
-
05:28 PM Revision 56178d9a: Correct filter tdr install_cron function
-
03:44 PM Revision 58d9e380: Don't skip over wrap_vga here.
-
02:28 PM Bug #2409: ipfw - entryzerostats
- Is this still the same with latest snaps?
-
02:27 PM Bug #2389: CP asks for a voucher code from MACs in the passthrough list
- Can you please try with a recent snapshot.
The snapshots back there had some issues with how CP config was being app... -
11:51 AM Bug #2597 (Resolved): Unable to create GRE port forward
-
11:47 AM Feature #1835 (New): uPNP IPv6 support
- The newer miniupnpd does support it, but produces errors when it's enabled and run. It compiles OK, but doesn't funct...
-
11:42 AM Feature #2595 (Resolved): Better hardware support for the Atoms (D2500, D2700, N2800)
-
11:41 AM Bug #2553 (Resolved): New lighttpd breaks connections from Safari on iOS
-
11:40 AM Bug #2527 (Resolved): Miniupnpd starts but isn't working
- Works for me, and many others on the forum report it to be working now.
-
11:40 AM Bug #2511 (Resolved): DHCPv6 Shows Wrong DUID
-
11:39 AM Bug #2490 (Resolved): Reassigning interfaces on console during restore causes them to be disabled, lose descriptions
-
11:39 AM Bug #2468 (Resolved): Interface does not exist warning during a network interface mismatch
-
11:38 AM Bug #2384 (Resolved): "Network interface mismatch" displayed for some valid configurations
-
11:38 AM Bug #1974 (Resolved): Captive Portal RADIUS accounting bytes wrong
-
11:37 AM Feature #1829 (Resolved): CARP with IPv6 support
- No problems with CARP+IPv6 on several clusters, seems to be fine.
-
11:36 AM Bug #1279 (Resolved): Filesystem on NanoBSD is left read/write at first bootup after package reinstallation
- This is fixed from all the tests I've tried, and others on the forum have reported it to be fixed.
-
11:36 AM Bug #1049 (Resolved): After reinstalling packages at bootup, WebUI not accessable (NanoBSD)
- Multiple sources confirm this is fixed.
-
11:26 AM Bug #2606 (Resolved): Unable to create ESP port forward
-
10:57 AM Bug #2606: Unable to create ESP port forward
- Updated to the latest nightly today (8/29) and was able to successfully add a port forward using the ESP protocol.
08/28/2012
-
06:41 PM Revision 6ab59b35: Add check for local port being set before testing. Fixes #2606
-
03:12 PM Bug #2401 (New): Mounting read-only after mounting read-write can be very slow on NanoBSD
- It may be improved a little but it's still slow even just running mount, no refcounts involved.
Still only affects c... -
02:04 PM Bug #2401 (Feedback): Mounting read-only after mounting read-write can be very slow on NanoBSD
- This should have gonne away with the fixes that went in for reference counting fixes.
-
03:00 PM Bug #2613 (Feedback): Incoming traffic on a vlan is not seen
- Applied in changeset pfsense-tools:commit:cba403d0126da81cd3fec30eed295548e4dbb445.
-
07:06 AM Bug #2613: Incoming traffic on a vlan is not seen
- After reading all that I've done and again carefully reading epek's answer I must admit he was right.
Setting the ... -
02:53 PM Bug #1279 (Feedback): Filesystem on NanoBSD is left read/write at first bootup after package reinstallation
With changes done to the reference counting code this should be fixed.-
01:59 PM Bug #2605 (Resolved): Filter rule are not created correctly
-
09:30 AM Bug #2605 (Feedback): Filter rule are not created correctly
- Applied in changeset commit:0d0558195ed9a0df50e8bce1fd52419921b0e30e.
-
06:50 AM Bug #2605: Filter rule are not created correctly
- yes. This patch works. Thanks for the quick turn around!
(tested with 2.1-BETA0 (amd64)
built on Mon Aug 27 14:5... -
01:58 PM Bug #2597 (Feedback): Unable to create GRE port forward
-
01:50 PM Bug #2606 (Feedback): Unable to create ESP port forward
- Applied in changeset commit:6ab59b35ec999c576a95317985b6901428c143bc.
-
12:31 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- No i can't give my config - but ill add the scheduled tasks and hope that this is related to the scheduler menu item....
-
12:12 PM Bug #2614: Scheduler bug - fires off on date not matched correctly
- Can you provide some examples from your config to debug this easily?
-
08:27 AM Bug #2614 (Closed): Scheduler bug - fires off on date not matched correctly
- I use Scheduler to trigger many rules, today the rules were all activated
The last date that was still in there was... -
12:22 PM Revision 0d055819: Don't put this rule in if $carp_int is empty, it makes an invalid rule. Fixes #2605
08/27/2012
-
06:41 PM Revision e3df974b: Restructure these IP/subnet tests so they don't break transport mode.
-
06:38 PM Revision 116ba665: Restructure these IP/subnet tests so they don't break transport mode
-
02:33 PM Revision ca929de8: Merge pull request #216 from bcyrill/patch-8
- Fix bug reported in http://forum.pfsense.org/index.php/topic,53000.0.htm...
-
02:25 PM Revision 2ef16014: Fix bug reported in http://forum.pfsense.org/index.php/topic,53000.0.html
-
12:44 PM Bug #2605: Filter rule are not created correctly
- If you change the test to this:...
-
08:11 AM Bug #2613 (Resolved): Incoming traffic on a vlan is not seen
- Traffic with a vlan tag is not seen on the vlan interface but is seen on the master interface.
traffic with a vlan... -
07:01 AM Bug #2612: PPTP client not connecting remote IPSEC site
- this conf was working before upgrade,can you please replicate this issue?do you want extra info from me?
-
06:32 AM Bug #2612 (Rejected): PPTP client not connecting remote IPSEC site
- This is a support/configuration issue, not a bug. Please use the forum or mailing list.
-
02:36 AM Bug #2612: PPTP client not connecting remote IPSEC site
- this issue asked by me on August 17 2012 under PPTP subcategory,but any answer yet
-
02:34 AM Bug #2612 (Rejected): PPTP client not connecting remote IPSEC site
- I got an IPSEC tunnel between Site1 and Site2. Both running pfSense 2.0.1-RELEASE (amd64)
PPTP clients connect to S... -
12:03 AM Revision 82c41ba1: Merge pull request #215 from phildd/master
- Tidy console package install progress percentage
08/26/2012
-
08:40 PM Bug #2611: all gateway not present when editing existing rule.
- Config attached.
it's a fresh install from 1-2 weeks with the 2.1 branch. updated to Sat Aug 25 13:20:25 EDT 2012 ... -
08:13 PM Bug #2611: all gateway not present when editing existing rule.
- Make sure you've read and followed the stickies on the 2.1 and IPv6 boards on the forum - sounds like you didn't edit...
-
08:12 PM Bug #2611 (Feedback): all gateway not present when editing existing rule.
- not seeing that, need more info, and/or a backup of your config attached.
-
07:26 PM Bug #2611 (Closed): all gateway not present when editing existing rule.
- When creating, i have all my gateway, i can select the correct one, everything works fine. if i save it, then edit th...
- 07:36 PM Revision e961bd67: Tidy console package install progress percentage
- This makes the file download percentage progress come out at the end of the line. New values are updated by using bac...
-
11:40 AM Feature #2595: Better hardware support for the Atoms (D2500, D2700, N2800)
- kitdavis reported in forum, that for amd64 build problem is also solved.
http://forum.pfsense.org/index.php/topic,51... -
10:04 AM Bug #2610 (Closed): Whole-disk gmirror may break when upgraded to a FreeBSD 10.x base
- Due to various changes in geom and how things are checked, a whole-disk gmirror may break when the base OS is updated...
-
09:23 AM Feature #2609 (Needs Patch): Support for ActiveDNS
- ActiveDNS is a South African service only aimed at serving South African
customers who use the cheaper "local-only" ... -
06:13 AM pfSense Packages Bug #2608 (Resolved): typo in pfblocker text
- in the north america page we have :
'Alias Only' - Will create alias pfBlockerNorth America with selected countrie...
08/25/2012
-
10:43 PM Feature #2603: Provide support for Package external name, internal name and service name to be different
- What design is preferred?
Allow a package to specify both <internal_name> and <service_name> in case they are differ... -
05:15 PM Revision d9c72958: Fix ntp config syntax for the version we're using
-
07:30 AM Feature #2361: router adv. daemon only allows for one subnet / limited options
- sorry for not responding earlier (haven't had a lot of time to experiment with pfsense). Just to push back a bit here...
-
02:00 AM Feature #2607: CARP Traffic affected from Traffic Shaping
- what do you mean bad user-defined config? I'm in a multi-WAN/multi-LAN setup. CARP is just set upped in my master and...
-
01:04 AM Bug #1053: CBQ per se, in kernel
- been waiting for this fix since a year now
-
01:00 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- will this be fixed or is it fixed in 2.1?
08/24/2012
-
11:10 PM Feature #2607 (Feedback): CARP Traffic affected from Traffic Shaping
- not a bug, you have a bad user-defined config. it's certainly possible to break CARP with certain shaper configs. Don...
-
11:04 PM Feature #2607 (Duplicate): CARP Traffic affected from Traffic Shaping
- CARP is freaking out, some VIPs were master on a box and some others are on the backup box. This started to happen wh...
-
10:22 PM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Tried updating to the latest snapshot tonight and immediately noticed issues related to the ARP on a VLAN. Looking to...
-
05:19 PM Bug #2606 (Resolved): Unable to create ESP port forward
- When attempting to create a port forward rule for the ESP protocol, pfSense complains a destination port has not been...
-
04:42 PM Bug #2605 (Resolved): Filter rule are not created correctly
- After upgrading to the latest snapshot, the filter rules refuse to load due to an error:
----
There were error(s)... -
12:47 PM Revision 0300d9ec: Try harder to determine hostname when sending e-mail.
-
08:53 AM Revision 7fca58c6: Merge pull request #214 from phildd/master
- Fix IPv6 remote_network typo
- 08:46 AM Revision 062fe17d: Fix IPv6 remote_network typo
- The IPv4 remote network was being displayed in both the IP4 and IPv6 input fields. Then whatever value was in the IPv...
-
01:39 AM Feature #2595: Better hardware support for the Atoms (D2500, D2700, N2800)
- FIXED for the D2500CC board, at least on x86 architecture.
Waiting confirmation for the x64 in the forum
08/23/2012
-
10:22 PM Feature #814: GUI should allow to bind openvpn on different ip same port
- Vote for this feature.
-
09:45 PM Revision 627fa5a9: Merge pull request #213 from bcyrill/patch-5
- Test for an array before using it like one.
-
09:40 PM Revision cf74d3a8: Test for an array before using it like one.
-
03:30 PM Bug #2590 (Feedback): OVA reports wrong version
- Applied in changeset pfsense-tools:commit:708b07d63bbdc49b2f56eca5cb3c8862f4c33a27.
-
03:30 PM Feature #2595 (Feedback): Better hardware support for the Atoms (D2500, D2700, N2800)
- Applied in changeset pfsense-tools:commit:2cce75c70fa831a4356184f88cefd6a3b65853c1.
-
03:30 PM pfSense Packages Bug #2572 (Feedback): bgpd[30274]: /var/etc/openbgpd/bgpd.conf: owner not root or current user
- Applied in changeset commit:c4cb635d11cd82e98be9d16d9abf4fc8b4a35c84.
-
03:30 PM pfSense Packages Bug #2575 (Feedback): OpenOSPFd pkg BETA 0.5.2 produces invalid ospfd.conf
- Applied in changeset commit:c051bf14000857ffff97ab80273a1a0ea6b62c7b.
-
03:10 PM Bug #1049: After reinstalling packages at bootup, WebUI not accessable (NanoBSD)
- Applied in changeset commit:1032ab47c73871993e34446b84767efd235cfd05.
-
03:10 PM Bug #2553: New lighttpd breaks connections from Safari on iOS
- Applied in changeset commit:d4f8cb1ad30c15e34a47f2d5c27d0d6ca09b5e2f.
-
03:10 PM Bug #2326: Erroneous successful webGUI authentication with blank password and AD authentication backend
- Applied in changeset commit:d427980c76cd11beeb923c939e1924fecf532a08.
-
03:10 PM Bug #2364: PPPoE Server doesn't restart correctly
- Applied in changeset commit:c714a1afdae4ce79dcb51e07787303b64ccf212a.
-
03:10 PM Bug #2209: PPPoE MTU is not correctly set from values on interfaces.php
- Applied in changeset commit:e39b6feb28bfbd72d0dca923bdc2d458b84476bd.
-
06:41 AM Bug #1841: TCP state issue when traffic passing through a GRE tunnel within IPSEC
- Hi! Thanks for the info - i will configure that as in one of my next projects, as i have to configure some tunneling ...
08/22/2012
-
06:50 PM Revision 5a429ed6: Fix another typo
-
04:15 AM Revision c1406943: Fix typo
-
04:06 AM Bug #2570: Status: Interfaces - Fatal error: Call to undefined function filter_configure()
- Fixed by pfsense Github pull request 200
-
03:40 AM Feature #2603 (Resolved): Provide support for Package external name, internal name and service name to be different
- Startup and shutdown code currently has lines like:
start_service($package['name']); /* rc.start_packages line 57 */...
08/21/2012
-
08:47 PM Revision 18080a21: This file won't exist at bootup yet, drop it from the sanity test.
-
08:23 PM Revision 5c8843d5: Teach ntpd how to get its time from a local GPS on serial.
-
03:11 PM pfSense Packages Bug #2602 (Closed): BandwidthD - Reported Traffic / Usage is approximately Double real amount
- 2.0.1-RELEASE (amd64)
built on Mon Dec 12 18:43:51 EST 2011
FreeBSD 8.1-RELEASE-p6
bandwidthd 2.0.1.3
AMD PhenomI...
08/20/2012
-
06:00 AM Bug #2401: Mounting read-only after mounting read-write can be very slow on NanoBSD
- Hi,
I've been having this problem with NanoBSD too. However, I just noticed that when I updated Safari to v6.0 the p...
08/19/2012
08/17/2012
-
02:43 PM Revision be9c20c7: Use REQUEST_URI here so the GET parameters are preserved (makes the links work better for things like interfaces.php?if=wan, and packages.
-
05:15 AM Revision dc3e3acb: Disable Execution timeout for this script.
08/16/2012
-
05:53 PM Revision 59b97df1: Correct carp rules and a weird nat rule on carp so they actually generate what they are meant for
-
01:30 PM Bug #2600: DHCP Server different parameter order in config.xml interrupts peer groups
- Hello Jim
I startet with an "empty" slave and configured interfaces and DHCP before initiating CARP.
Then it was... -
11:34 AM Bug #2600: DHCP Server different parameter order in config.xml interrupts peer groups
- Do you have the HA sync settings set to copy the DHCP settings from master to slave? If so it should be copying that ...
-
08:01 AM Bug #2600 (Resolved): DHCP Server different parameter order in config.xml interrupts peer groups
- I have installed two pfsense (2.1) in CARP mode which works fine exceptionally the DHCP server. I had always interrup...
-
07:33 AM Feature #2599 (Closed): Captive Portal autologin function better than MAC passthrough
- We use pfsense in an apartment hotel to organize the network. As portal server we use Antamedia at the moment. We wan...
-
02:18 AM Revision 391abfcf: Extend the shortcuts code and link back from Status > Services also.
-
12:54 AM Bug #2598 (Resolved): reply-to on IPv4+6 rules breaks v6
- The auto-added reply-to on WAN rules in combination with IPv4+v6 rules breaks v6 connectivity, as the v4 IP is includ...
Also available in: Atom