Activity
From 09/15/2018 to 10/14/2018
10/14/2018
-
09:00 AM Feature #9044 (New): Add SoftEther
- It would be nice if you can add SoftEther program. It supports OpenVPN and it has more functions than the simple Open...
10/13/2018
-
01:34 PM Todo #9041 (Resolved): update ntopng 3.6.0
- update ntoping to 3.6.0
and enable activity map
the latest version of pfsense seems dos not enable activity ...
10/11/2018
-
11:34 AM Feature #8769: Allow FreeRADIUS users to change their own Passwords and Pins
- No, because there isn't a generic way to change a RADIUS password like that. It depends on the RADIUS server and its ...
-
11:21 AM Feature #8769: Allow FreeRADIUS users to change their own Passwords and Pins
- Isn't this something that could be created as an add-on and not rely completely on the back end radius package?
10/09/2018
-
03:43 PM Bug #9031 (Resolved): Suricata fails to start with interface with /31 mask
- I have discovered that Suricata will not start in blocking mode when an interface has a /31 subnet mask when using an...
-
07:58 AM Bug #9027: HAProxy: Unknown keyword lua-load
- Should be fixed now, thanks for reporting.
-
06:49 AM Bug #9027 (Resolved): HAProxy: Unknown keyword lua-load
- After upgrading pfSense from 2.4.3_1 to 2.4.4 our haproxy didn't started anymore.
The error we got was `Unknown ke...
10/08/2018
-
01:00 AM Bug #9025 (New): SquidGard + Target categories
- Hello,
An error occurs after applying the changes to SquidGard when:
Removing an unwanted target category from "T...
10/06/2018
-
02:24 PM Bug #9020: Impossible to register ACME wildcard certificate regardless documentation
- Jim Pingle wrote:
> You have some kind of configuration error. I tried it again exactly as stated on the page and it... -
- You have some kind of configuration error. I tried it again exactly as stated on the page and it works.
-
- Documentation at https://www.netgate.com/docs/pfsense/certificates/acme-wildcard.html states what needs to be done to...
-
- This is only about the icon on the button on the key registration page, and it is working properly now.
-
- This is so true, the UI always gives the "green" response regardless what catastrophic failure occurred, confusing us...
-
-
03:12 AM Bug #8989: [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- Seems good to me. It can be marked as resolved
10/05/2018
-
- This was fixed days ago. Update to the latest version of that package.
-
12:24 PM Bug #9013 (Resolved): pfSense Crash: AVAHI_RCFILE undefined constant
- [04-Oct-2018 04:31:18 America/New_York] PHP Warning: Use of undefined constant AVAHI_RCFILE - assumed 'AVAHI_RCFILE'...
-
11:25 AM Bug #9012 (New): Captive Portal authentication in Squid Proxy Server does not work
- Version pfsense 2.4.4-RELEASE (amd64)
I have configured Authentication Method to "Captive Portal" in Squid Proxy Ser...
10/04/2018
-
11:51 AM Feature #9008: Add Zabbix 4 (agent and proxy) packages
- https://github.com/pfsense/pfsense/pull/3995
https://github.com/pfsense/FreeBSD-ports/pull/580 -
What's new in Zabbix 4.0.0:
https://www.zabbix.com/documentation/4.0/manual/introduction/whatsnew400-
06:51 AM Feature #9003 (Resolved): Add 'Copy Running to Saved' option to the raw config
- Would be possible to add these buttons to the raw config page as the Quagga package does, i'm slowly moving over to u...
10/03/2018
-
- Confirmed fixed by other forum users who hit the same issue: https://forum.netgate.com/topic/136288/squidguard-and-mu...
-
- Fix pushed in squidGuard pkg version 1.16.18_1 which will be up shortly.
-
- Probably something similar to what I fixed yesterday in ACLs. I'll take a look.
-
08:17 AM Bug #8997 (Resolved): squidGuard Times does not accept more than one value
- squidGuard Times does not accept more than one value. (PFSense 2.4.4, squid 0.4.44_5, squidGuard 1.16.18)
On the... -
09:46 AM Bug #8945: SquidGuard ACL blacklists
- I had to make a clean install, but it is working for me as well ! Thanks a lot for your support guys
-
-
01:16 AM Bug #8945: SquidGuard ACL blacklists
- Works again. Thank you
-
- Great Thanks a lot. It works fine in my pfsense
-
-
07:57 AM Bug #8996: pfBlockerNG not like CloudFlare DNS
- Sorry - issue already resolved in devel version.
-
- Hi all, pfBlockerNG use IP 1.1.1.1 is list of IPs is NULL, so any time list is null CloudFlare DNS can be banned, fil...
10/02/2018
-
- Fixed in squidGuard pkg v 1.16.18 which will show up shortly.
-
-
05:46 AM Bug #8989 (Feedback): [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- PR merged
-
04:28 AM Bug #8989: [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- See https://forum.netgate.com/topic/135894/solved-freeradius-doesn-t-start-after-a-pfsense-2-4-4-fresh-install-and-re...
-
- This is my fault. I have to appologize for this error, sorry.
see #8927 -and https://github.com/pfsense/FreeBSD-p... -
01:51 AM Bug #8989: [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- Same here - Radius won't start after Update anymore
10/01/2018
-
10:24 PM Bug #8989 (Resolved): [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- freeradius is not starting after latest update, i figured out the issue.
radiusd -X show:
@Errors reading /usr/... -
- Nothing intelligible here. Most likely a duplicate of #8945
Post to the forum if that is not the case. -
11:06 AM Bug #8986 (Duplicate): Clear SQUID GUARD
- No set options list access squidguard
clear error !!! save button -
10:56 AM
Bug #8984 (Feedback): stunnel: Illegal string offset and other PHP hiccups (due to PHP upgrade)
- This was corrected in stunnel 5.37
-
- There is some ongoing work happening on the stunnel package, this is likely already fixed in the development version ...
-
08:27 AM Bug #8984 (Resolved): stunnel: Illegal string offset and other PHP hiccups (due to PHP upgrade)
- The last major upgrade of the PHP packages caused this: ...
-
-
09:10 AM Bug #8871: Suricata: input not validated properly in suricata_rulesets.php results in wrong argument passed to in_array()
- The variable _$enabled_rulesets_array_ is populated by the PHP code as it reads the config.xml configuration for the ...
-
- Seems to have been fixed silently, or through a different component or such, but no updates recorded here...
-
- At the moment, to support storing additional data in an array of disks or just a single storage media, we must levera...
-
- Marcel Beerli wrote:
> Then it looks like its in pfSense 2.4.4 not in the packages.
> Lets hope it gets addressed i... -
- Then it looks like its in either of the 2 packages. (squid or squidGuard), probably squidGuard
-
- I was on release 2.4.3-RELEASE-p1 (amd64) and did package updates to
squidGuard -> 1.16.17_3
squid -> 0.4.44_5
... -
03:22 AM Feature #8982 (New): HAproxy ACL support for map in configuration UI
- When defining ACLs with the GUI, it would be nice to have support for matching against a map for "Host matches:" type...
09/29/2018
-
10:30 AM Bug #8909: tinc package makes /rc.newwanip looping forever
- I temporary blocked the loop by disabling the OPT interface associated with tap0:...
09/28/2018
-
- Just some additional feedback.
I reinstalled squid, did not work.
then I uninstalled squid.
then I installed squid... -
- There is no longer a general problem here. Read the last comment on #8832 again.
Uninstall the package and then in... -
- Running on PC Engines APU2, pfSense 2.4.4, squid 0.4.44_5 and squidGuard 1.16.17_3
Service c-icap is not starting ... -
- Any indication when this is getting fixed?
Its in PackageProxy filter SquidGuard: Common Access Control List (ACL)Co... -
- Uninstall squid and then reinstall. If it still won't start, then it's not this issue. Start a new thread on the foru...
-
-
02:23 AM
Bug #8966: Patches page uses GET instead of POST when performing actions
- It seems to be fixed now. Thanks for the quick turnaround.
09/27/2018
-
- upgraded to squid 0.4.44_5 but c-icap is still not starting.
-
- Yeah that was due to a syntax error I made in the previous commit. Fix has been pushed, update and try again
-
06:42 PM
Bug #8966: Patches page uses GET instead of POST when performing actions
- I'm not entirely sure this related, but I just upgraded a system to 2.4.4 which picked up the new System Patches v1.2...
-
- Fixed in System Patches v1.2, which will show up shortly.
-
11:53 AM Bug #8966 (Resolved): Patches page uses GET instead of POST when performing actions
- When the patches page system_patches.php is used to apply or revert a patch, the link in the cookie trail area of tha...
-
- ACL issue is a duplicate of #8945
icap issue is a duplicate of #8832 -
- Hi,
running with pfsense 2.4.4 with squid 0.4.44_4 and squidguard 1.16.17_3
when Squid Guard Proxy Filter - Group A... -
12:55 PM Bug #8945: SquidGuard ACL blacklists
- I had to rollback too...
09/26/2018
-
06:37 AM Bug #8945: SquidGuard ACL blacklists
- lahoucine El kamel wrote:
> Hello,
>
> When editing the Squid Guard Proxy Filter I noticed that the settings afte... -
06:00 AM Bug #8945: SquidGuard ACL blacklists
- lahoucine El kamel wrote:
> Hello,
>
> When editing the Squid Guard Proxy Filter I noticed that the settings afte... -
- Hello,
I have updated Squid and the ACL issue is still there.
When editing the Squid Guard Proxy Filter I noticed...
09/25/2018
-
- This should be fixed now. Update the squid package and it should pick up the c-icap update and then work as expected....
-
- Attached is a patch to fix the c-icap FreeBSD port default config to use the correct current syntax.
-
- The upstream port is _not_ fine. See the file I linked. The FreeBSD port is explicitly adding the ListenAddress direc...
-
10:33 AM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting
- Hi Jim,
the guy from the mailing list is me.
The "Listen" directive was removed from 0.4 to 0.5.
Upstream port... -
- Duplicate of #8938
-
04:47 AM Bug #8944 (Duplicate): attemp of installing pfblocker brakes system on 2.4.3
- Any attempt to install pfblocker on clean 2.4.3-p1 breaks system.
Errors during installation:... -
- The i-cap issue is covered under #8832
-
- Hello,
When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.
Example...
09/24/2018
-
- Duplicate of #8832
-
- After the upgrade I had a crash report but it seemed to run. But on a new restart of the pcengines APU2 it would not ...
-
- If the FreeBSD port is wrong, though, it should be fixed upstream. Then we wouldn't need to make any changes.
Some... -
07:17 PM Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting
- Suggested fix: https://github.com/stephenw10/FreeBSD-ports/commit/d21954ad3b4e44e4df6e43e88ac22d589d8cf1b7
-
- This is a problem in the FreeBSD c-icap port. The port itself contains a patch that adds the ListenAddress line.
h... -
- Confirmed the above fix is still functional in 2.4.4r but the default package is still broken.
As a workaround you... -
- Ah, I forgot that it automatically probes the "latest stable" repo which automatically points you to 2.4.4/RELENG_2_4...
-
03:44 PM Bug #8932: Upgrade to HaProxy 0.59_11 fails on 2.4.3
- I can confirm that upgrading to 2.4.4 fixes it, as well as downgrading haproxy to 0.59_9 via: pkg add -f https://file...
-
- I agree "it shouldnt be". But i'm seeing my 2.4.3 box offer to install haproxy 0.59_11 .. which at least isn't availa...
-
- It shouldn't be, they are on different branches (RELENG_2_4_3 vs RELENG_2_4_4), the commit may have been manually che...
-
- It seems like 2.4.3 is automatically pulling in the 2.4.4 repository files..?? Even though the 2.4.3 files still exis...
-
- Well it sounds as if https://github.com/pfsense/FreeBSD-ports/pull/555#discussion_r212271252 got into 2.4.3?
-
- No, each release has its own branch. It's possible that an edit intended to only stay on 2.4.4 was picked back to 2.4...
-
- Are you saying that packages are served from one repo only and will more or less immediately break if a new release o...
-
- Upgrade to 2.4.4 and try again.
-
- I cannot upgrade to haproxy 0.59_11 because getarraybyref() no longer exists:...
-
- Fix committed in Service Watchdog pkg version 1.8.6, which will be up shortly after 2.4.4-RELEASE
09/23/2018
-
- After hitting that uninstalling I'm unable to re-install:...
-
01:57 PM Bug #8931 (Resolved): Service Watchdog PHP Errors
PHP errors
PHP ERROR: Type: 1, File: /usr/local/pkg/servicewatchdog.inc, Line: 83, Message: Uncaught Error: ...
09/19/2018
-
06:44 PM Feature #8613: pfSense-pkg-acme: acme_certificates_edit.php - Add support for --challenge-alias acme.sh flag
- Thanks for this nifty feature. It works well in most cases.
I've seen an issue with some DNS-Providers which are n... -
- Fix coming in OpenVPN Client Export package version 1.4.17_2
-
- When attempting to export a VPN configuration for a user, if that user's ID is 0 then the username is not added to th...
-
- > 2.4.4-DEVELOPMENT (amd64)
> built on Tue Sep 04 10:04:12 EDT 2018
> FreeBSD 11.2-RELEASE-p2
That snapshot is v...
09/18/2018
-
10:49 PM Bug #8904: Shellcmd: pfBlocker's earlyshellcmd is being removed at boot
- Added *Shellcmd package* functionality to *pfBlockerNG-devel* here:
https://github.com/pfsense/FreeBSD-ports/pull/56... -
- A previous fix to shellcmd to address PHP errors changed it from using references to using a copy of the config, whic...
-
- 2.4.4-DEVELOPMENT (amd64)
built on Tue Sep 04 10:04:12 EDT 2018
FreeBSD 11.2-RELEASE-p2
PHP ERROR: Type: 1, F... -
- I just realizd that each time the tincd(8) daemon is started, pfSense detects the new IP address on its dedicated int...
09/17/2018
-
- On install, shellcmd imports the items from the earlyshellcmd tags and reformats them into the shellcmd package setti...
-
- Fixed in commit:59e2c01227cc on factory-ports, aws-wizard pkg version 0.7_2 will contain the fix when it builds.
-
-
- Yes, this seems to be fixed for a while now (the upgrade was fun since it broke my workaround :D)). Thanks!
-
- Sorry, you're right, this is the -devel package. I'd forgotten I'd installed that.
I agree the earlyshellcmd issue... -
04:22 AM Feature #8523: make cookie inserted by haproxy secure
- Thank you! I do see the secure option in haproxy version 0.59_9.
Where did you add another options?
09/16/2018
-
- Posted two PR to fix these issues and add other improvements.
https://github.com/pfsense/FreeBSD-ports/pull/567
h... -
- Steve, Are you sure this is not from pfBlockerNG-devel?
https://github.com/pfsense/FreeBSD-ports/blob/devel/net/pf... -
- This error looks to be triggering an unrequired config update:...
-
- Sorry clipped the line in the copy there. Actual warning is:...
-
- Seeing this on a clean install of pfSense-2.4.4.r.20180914.1530 and restoring an existing config....
-
- The Shellcmd package is incorrectly removing the pfBlocker early shellcmd entry at each boot....
-
- Pi Ba wrote:
> Hmm, i suppose your right.
>
> You could add below to the 'global advanced pass thru', that should... -
- Hmm, i suppose your right.
You could add below to the 'global advanced pass thru', that should solve the issue.
<... -
- Package Version:
haproxy-devel net 0.59_9
Package Dependencies:
haproxy-devel-1.8.13
cat /etc/version
2.4.3...
09/15/2018
-
- Fixed: https://github.com/pfsense/FreeBSD-ports/pull/567
-
04:05 PM Bug #8900 (Resolved): pfBlockerNG
- Crash report begins. Anonymous machine information:
Current Base System 2.4.4.r.20180914.1544
amd64
11.2-RELE... -
- 2.4.4-RC (amd64)
built on Fri Sep 14 15:45:39 EDT 2018
FreeBSD 11.2-RELEASE-p3
Factory install aws-wizard: F... -
- I've added a bunch of cookie options.. Does it work for you?
-
- The server configuration now allows separate activation of ssl for regular traffic and for health-checks. That should...
-
-
- I am no longer seeing these errors.
Also available in: Atom