Activity
From 11/16/2013 to 12/15/2013
12/15/2013
-
12:12 AM Bug #3364 (Resolved): DHCPv6 "Deny unknown clients" does not work
- While experimenting with IPv6 I noticed that the "Deny unknown clients" option in "Services - DHCPv6 server" does not...
12/14/2013
-
- TinyDNS seems not respond to IPv6 addresses when trying DNS Server - Settings - Respond to IP.
I have tried to make ... -
01:29 AM Feature #3199: Option to accumulate or not IP addresses in Alias table of FQDNs
- Thanks for the confirmation. Sorry, forgot to mention that I'm running 2.1-RELEASE as well.
It seems like a bug t...
12/13/2013
-
12:40 PM Feature #3362 (Feedback): Add a means to reset CP HTML/Error Page/Logout Page to default
- Applied in changeset commit:92603e27d98bb89f63b2c0581f2fad2c39a9b09e.
-
11:17 AM Feature #3362 (Resolved): Add a means to reset CP HTML/Error Page/Logout Page to default
- While testing #3339 it hit me that we don't have any way to clear the defined pages for a captive portal instance. To...
-
- This works as expected, I can download the raw html/php source of the uploaded CP page.
-
- This appears to properly check now, adding a duplicate with different case is not allowed and produces an error in th...
-
- This all appears to work as expected now.
-
- Additional info:
ifconfig shows ACCEPT_RTADV on for the WAN NIC.
Adding the gateawy manually does allow it to w... -
- On a 2.2 image the firewall pulls a WAN IP and even a LAN delegation, but does not get an IPv6 default route.
An i... -
10:44 AM pfSense Packages Feature #3320: HAVP does not honor FW Gateway rules
- My bad...
Found a nice piece of documentation for those who like experience this:
http://securite-ti.com/pfSense_We... -
- This works as expected on 2.2.
With it unchecked, IPv6 is preferred. Check it and try again, it uses IPv4. Unchec... -
- This appears to work fine, it rejects any firewall MAC I attempt to add.
-
- Looks like it all works as expected now, thanks!
-
02:28 AM Feature #3199: Option to accumulate or not IP addresses in Alias table of FQDNs
- I just double-checked this now that 2.1-RELEASE has been out an running for ages. I have a table of the IPs of all my...
-
- I just ran into this problem, and I'd consider it a bug that needs to be fixed, not a feature request. I was using a...
12/12/2013
-
- The format is slightly different on 10.x than 9.x examples above.
In this sample output, 192.0.2.x is WAN on em0, 19... -
- Still crashes on a current snapshot at the end of the wizard....
-
12:56 AM Bug #3046: Fatal error: Call to undefined function get_interface_ip() in /usr/local/captiveportal/radius_authentication.inc on line 56
- I can confirm that this is also happening in 2.1-RELEASE with free radius2 2.1.12_1/2.2.0 pkg v1.6.7_2
12/11/2013
-
04:36 PM Bug #3321: IPSEC failure on modem reset, automatic reconnection is broken, must manually restart racoon service
- More users reporting the same issue:
http://forum.pfsense.org/index.php/topic,67625.0.html -
- Another user reports the same issue:
http://forum.pfsense.org/index.php/topic,67929.0.html -
- More users reporting the same issue:
http://forum.pfsense.org/index.php/topic,68776.msg376347.html#msg376347 -
- Another user reports the same issue:
http://forum.pfsense.org/index.php/topic,69235.0.html -
04:20 PM pfSense Packages Bug #3360 (Resolved): Apache reverse proxy-dev leaves / out of Backend Path
- When configuring locations the "backend path" text says "Backend redirect path. Leave blank to use / "
But if left b... -
09:41 AM Bug #3045: NTPD crash / doesn't come up
- I can report that this happens on i386 and amd64. I've switched architectures trying to avoid this bug. I can also re...
-
03:11 AM Bug #3264: Double traffic on vlan interfaces "out" side
- The bug is only in the out graph and it's seen on aggregated interfaces too. That's about it.
-
- Duplicate of #3314. This is older but there are more data there.
-
- amd64 version is affected too
https://redmine.pfsense.org/issues/3264
12/10/2013
-
- Applied in changeset commit:aebf41dfa424604315e42bf0cc3ca545760989ea.
12/09/2013
-
- The PBI directories are correct for 2.1 packages. The other values can be solved through configuration changes to the...
-
- Following command gives:
$ httpd -V
Server version: Apache/2.2.23 (FreeBSD)
Server built: Dec 20 2012 15:58:11... -
- I can't break it now - the console interface is validating lots of IP subnet and DHCP range stuff... Since I did the ...
-
-
08:30 AM Bug #3045: NTPD crash / doesn't come up
- Sorry for posting here again. But I still got the "exited on signal 11 (core dumped)" error sometimes.
NTP runs fine... -
- I've pushed a fix but saved servers has now duplicated pppoeid fields on config.xml, you should remove and add them a...
-
- Applied in changeset commit:9a2d491c037162137255756eb05bd62316103d42.
-
- Applied in changeset commit:d8b011b8e6bfea3d0cc841dccd5bc4e764d4f96b.
-
- Applied in changeset commit:fb7c06b834fd1b02519039f3b3a206338bdcb3f8.
12/08/2013
-
- Latest changes for the console work nicely - it re-prompts for the IPv4 address when the address and netmask combinat...
-
04:51 PM Bug #2286: Multiple PPPoE Server do not work
- Markus Engelbrecht wrote:
> After adding a second PPPoE Server on a different VLAN (interface) the first and the se... -
07:07 AM Bug #3353 (Resolved): Changing IPv6 from None to DHCP6 or vice-versa causes a panic+reboot
- This is solved now mostly a problem in pf patches rather than other places.
12/06/2013
-
- When an outdated version of a package is installed and pfSense is updated, it will call pkg_reinstall_all() on next b...
-
-
11:43 AM Bug #3308: route-to/reply-to not updated when PPP gateway IP changes
- This just happened again and per your suggestions I checked Status>Gateways and /tmp/rules.debug.
Status>Gateways ... -
09:55 AM Bug #3357 (Resolved): IPv6 on PPPoE default gateway assignment incorrect
- I started with a forum post here [[http://forum.pfsense.org/index.php/topic,68364.0.html]] with details as well.
... -
- Applied in changeset commit:77a341a458d604287f46180db1facbdb540cd139.
-
02:46 AM Feature #3356 (Resolved): Document functionality of unclear DynDNS providers
- The pages [1] and [2] would benefit from improved documentation of certain DynDNS providers. For example, there are t...
-
- This report corresponds with mailing list email 'Bug in DynDNS notification sequence'.
*PRELUDE*
Some DynDNS pr...
12/05/2013
-
- As a side-issue, I purposely put in dodgy values for the DHCP - outside of the subnet I had specified - and was surpr...
-
- I did GitSync and tried this on the console. Here is some sample output:
@Enter an option: 2
Available interfaces... -
05:03 PM Bug #2082: Captive Portal error when client IPs are reused
- it is a requirement to configure your DHCP lease time and CP timeout appropriately, that's not a work around, it's th...
-
09:45 AM Bug #2082: Captive Portal error when client IPs are reused
- The issue is not resolved, linking the DHCP lease time and CP timeouts is a workaround.
The CP must work based on MA... -
- "When the DHCP lease time is shorter than the idle/hard timeout of the captive portal the following situation may hap...
-
- When the DHCP lease time is shorter than the idle/hard timeout of the captive portal the following situation may happ...
-
- During bootup of a pfSense 2.2 / FreeBSD 10 image there is an error from savecore. It still works despite the error, ...
-
- On a 2.2 image running FreeBSD 10, you can step all the way through the wizard but clicking "Reload" at the end cause...
-
12/04/2013
-
11:31 PM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- Hello,
I just experienced this issue. My pfSense build is:
2.1-RELEASE (i386)
built on Wed Sep 11 18:16:50 ED... -
06:14 PM Bug #3349: System Information Widget Showing Incorrect Memory Used %
- Also i created some code to accurately show what % of the disk space is being used instead of pulling what % DF puts ...
-
- Yes, i have tested my new code on 4 systems and tried it with varying amounts of memory, anything over 512MB, and wit...
-
- You should take inactive and cache into consideration, as it happens today. Considering it you still see differences ...
-
- This patch doesn't apply cleanly. Is it possible to submit this change using github's pull request? It's much easier ...
-
12:36 AM Bug #3351 (Needs Patch): increase traffic graph.php SVG resolution
- While debugging a limiter issue it turned out I needed the text on the traffic graphs which hadn't been working for m...
-
04:12 PM pfSense Packages Bug #999: vhosts does not show up as started
- looks a little weird... it seems that \b...\b didn't match the old way:
[2.1-RELEASE][root@pfsense.local]/root(23)... -
- Applied in changeset commit:21d74c8e79948cd05c11f0ab79a463aea4bff2ce.
-
- Applied in changeset commit:20dda766516f943339799abc31f7c3640fff3195.
-
- Since this ticket is light on detail, there are a few main issues with the current driver:
1. Error message from t...
12/03/2013
-
10:54 AM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- It seems a workaround is to set the interface to static, type an IP, then submit the changes. Once you do this, you c...
-
- Same issue on 2.1-RELEASE (i386)
built on Wed Sep 11 18:16:50 EDT 2013
FreeBSD 8.3-RELEASE-p11 -
- It's not only setup wizard, but you can also use network or broadcast addresses on interfaces.php and console.
-
- Applied in changeset commit:f70a140fe18cb80012e53f82c268788fbcae5436.
-
- Applied in changeset commit:5bc623536d8bb3b93e68a1b1535c9de582721a09.
-
05:12 AM pfSense Packages Bug #3344: Disable IPV6 Squid3 not run
- Bus only disable ipv6 suport that squid3 port closed
-
- Confuse with another bug reported.
-
- How is it related to squid3? It's an openvpn conf. I'm confused
-
- Generated example configurator GUI pfsense.
Generated parameter automatic tun-ipv6
Print attached configuration gen... -
- but disable checkbox not create route ipv6 automatic
-
- that checkbox has nothing to do with what squid will bind to. It only blocks IPv6 network traffic, which can't have a...
-
- that's how things are supposed to work, you need floating rule policy routing for anything initiated by the firewall ...
12/02/2013
-
- If you disable an interface that's a VLAN, it deletes the VLAN, and re-enabling that interface doesn't add the VLAN i...
-
- I have 2048MB on my system. With the code below the web gui system information widget shows i have 512MB installed, t...
-
- Applied in changeset commit:aa87cf1108532f083761a5d2da4ff518cc398356.
-
- Applied in changeset commit:61422dd487c2646c21b09b8bb3588ed3e49e3223.
-
- Known issue, already fixed in the repository.
-
02:36 AM Bug #3348 (Resolved): DHCP server: IP of next-server is lost on upgrade to 2.1
- When upgrading from 2.0.3 to 2.1, the contents of the next-server entry in the DHCP server settings is lost. This hap...
-
- Well, it actually seems that putting a computer's IP in the bypass list of squid does finally honor FW rule to route ...
12/01/2013
-
04:01 PM pfSense Packages Bug #2602: BandwidthD - Reported Traffic / Usage is approximately Double real amount
- This issue should remain closed.
This note is being added so that there is an answer associated with this issue to...
11/29/2013
-
- The configuration generated by the openvpn server in the conf file via shell shows support for ipv6 enabled even usin...
-
- OpenVPN creates whatever routes it's configured to create (or that it pulls if pulling is enabled). No sign of a bug ...
-
- Yes.
System -> Advanced.
Disable ipv6 support package squid3 closed port 3128, but the service runs but refuses con... -
- Need more info, what specifically do you mean by "Disabling IPv6"? Checking the box under System>Advanced?
-
- 1:1 NAT works fine, sounds like you have an issue with your upstream ARP cache.
-
01:50 AM Bug #3346: 1:1 NAT rule (w/ VIP) breaks connectivity to WAN
- To note: I've tried taking the backup from the alix board and applying it to the new machine (intel motherboard), and...
-
- Clean installation on a computer, setup default gateway, dhcp and set up basic internet connectivity, no packages, no...
-
04:44 AM Bug #3347 (Resolved): Certificate Authority SAN names not working in 2.1
- Hey Guys, It appears Subject Alternative Names are not working in the CA module for pfsense 2.1.
The fault is, the...
11/28/2013
-
02:42 AM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- Pfsense 2.1-RELEASE (amd64)
built on Wed Sep 11 18:17:37 EDT 2013
FreeBSD 8.3-RELEASE-p11
This exact bug just ha...
11/27/2013
-
- OpenVPN creates ipv6 default route in p2p mode with virtual interface ovpns1 dedicated tunnel. Setup OpenVPN server g...
-
- Disabling ipv6 in the GUI squid3 closes port 3128.
11/26/2013
-
- Applied in changeset commit:d11134243489f7cea17cdc4c04a0624b0c16ed18.
-
- Applied in changeset commit:3f0cc2f41dcbda4342244130aab6772c6bc358d0.
11/25/2013
-
- It looks like this is all OK now - but 0.0.0.0/0 is still there. Is that needed? Intentional?
On 2.1 it appears to... -
- This seems to work OK until you add a new entry. When you add a new entry, the IPs appear to be sorted and end up in ...
-
02:06 PM pfSense Packages Bug #3343 (Closed): (re)starting freeradius service throws "The command '/usr/local/etc/rc.d/radiusd.sh stop' returned exit code '1', the output was 'radiusd not running?'"
- This is related to freeRADIUS version 2.1.12_1/2.2.0 pkg v1.6.7_2 running on 2.1-RELEASE (i386)
Everytime i start... -
- When adding a new mac address to configuration via gui there seems to be no input validation.
Services -> FreeRAD... -
- If a user accidentally sets their GUI auth backend to a RADIUS or LDAP server that is unreachable, it can be difficul...
11/24/2013
-
01:41 PM Bug #3340: Captive Portal deletes concurrent sessions even if noconcurrentlogins is not set
- Or would it be better to:
if (isset($config['captiveportal'][$cpzone]['noconcurrentlogins'])) {
if (isset($tm...
11/23/2013
-
- Function captiveportal_prune_old_automac() deletes duplicate sessions even if noconcurrent logins is not set.
This...
11/22/2013
-
- Currently there is no easy way to get the Captive Portal HTML/error/logout page files back once they have been upload...
-
- According to racoon.conf(5) the syntax of the remote statement we currently use has been deprecated and will be remov...
-
11:15 AM Bug #3337 (Resolved): Dashboard Thermal Sensors use "unfriendly names" for Core >= 4
- The dashboard widget for "Thermal Sensors" displays names like "dev.cpu.4.temperature" instead of "Core 4" for my sys...
-
10:23 AM Feature #3336 (Closed): Setting per-pool timeout in load balancer
- Hi there,
It would be nice to have a per-pool timeout (for checks) on the Load BAlancer.
At this moment on the ... -
- pf matches states based on the ICMP id and source/destination but NOT on type/code. If the required bits match, the t...
-
03:07 AM Bug #3335 (Rejected): Outgoing connections opens the firewall from outside
- I have a pfsense with three ports.
These are a LAN (192.168.10.0/24), a DMZ (192.168.30.0/24) and an unused WAN port...
11/21/2013
-
- Applied in changeset commit:82d1a33e4a0a9e1988277fcd4f9401355a9b4fee.
-
- Applied in changeset commit:d3b17c9a0b111ce20869f226322365324e0da4ce.
-
05:18 AM Bug #3334 (Resolved): Status/Traffic Graph isn't IPv6 ready
- In /usr/local/www/bandwith_by_ip.php, which is called per AJAX/XHR to provide the data for the right table in "Traffi...
11/20/2013
-
03:14 PM Bug #3333 (Closed): usbusX devices show up as NICs.
- Version 2.1-RELEASE (amd64)
built on Wed Sep 11 18:17:34 EDT 2013
FreeBSD 8.3-RELEASE-p11
You are on the lates... -
12:33 PM Bug #3332 (Rejected): Impossible to change the user for XMLRPC Sync
- Hi all,
I have set a user to test the XMLRPC Sync, so now I try to use an other user.
But the user can't be cha... -
- Applied in changeset commit:e924cd7eb2457e7fd7122aecc1f2887824229edb.
11/19/2013
-
- On 2.1 some rules are generated on an interface (e.g. WAN) to pass out traffic for Proxy ARP VIP addresses. These rul...
-
01:37 PM Bug #3330 (Closed): Load Balancer showing wrong Status when using aliases for the port
- Hello,
I have come across the issue of using Load Balancer with Port Alias's and the status not showing properly i... -
- We should have the ability in Phase 2 to negate the action ("none" in the SPD) so that specific traffic can be made t...
-
- Currently the IPsec entries are stuck in the order they were created, which can be problematic if you need to ensure ...
-
- Because 1:1 NAT entries can be general (subnet to subnet) or specific (IP to IP) there is a need to be able to reorde...
-
- Applied in changeset commit:858211ddde3b2a5eff0de609bf47070c4a7a776f.
11/18/2013
-
09:37 AM Bug #3326 (New): IPv6 only PPPoE connection
- pfSense version: 2.1-RELEASE
I have discovered that it is impossible to have IPv6 only PPPoE connection. PPP keeps r... -
- ntpd binds all interfaces, but listen only on the interfaces you choose. This is defined on ntpd.conf. You can check ...
11/16/2013
-
- For those interested in implementing the fix: After updating your Quagga package, edit each interconnect interface (e...
-
06:00 AM Feature #3325 (Closed): MTU Option for PPTP VPN
- In 2.1-RELEASE version, the mtu of PPTP VPN has a fixed value which stored at line 783 of /var/etc/pptp-vpn/mpd.conf
... -
02:47 AM Bug #3324 (Rejected): NTP Server listens on all interfaces despite that fact there is a configured interface to listen on
- I've have configured NTP Server to listen only on LAN interface but it binds to all available interfaces.
Also available in: Atom