Activity
From 07/16/2021 to 08/14/2021
08/14/2021
-
12:00 PM Bug #12260 (Closed): Update popup and version missmatch?
- Always showing popup in the corner about the available update, every refreshed page, no setting to disable it?
A new... -
11:52 AM Bug #12240 (Resolved): Syslog-ng does not remove logrotate.conf after disable
- Tested on Syslog-ng 1.15_11. /usr/local/etc/logrotate.conf is removed after disabling the service. Marking the ticket...
-
11:08 AM Bug #12242 (Resolved): rc file is not deleted
- Tested on NET-SNMP 0.1.5_9.
/usr/local/etc/rc.d/net-snmpd.sh and /usr/local/etc/rc.d/net-snmptrapd.sh are removed ...
08/13/2021
-
08:39 PM Bug #12251: Wireguard 0.1.5 - ignores "KeepAlive" parameter if empty (instead of disabling)
- Thanks. I ended up setting it to a high value, e.g. 86400
-
06:40 PM Bug #12258 (Resolved): Copy key buttons only work in HTTPS mode
- Yes of course everyone should be using HTTPS all the time especially now with ACME being available, but sometimes wel...
-
07:43 AM Feature #11531 (Pull Request Review): Show netmap compatible cards in IPS Mode note
-
02:07 AM Feature #11531: Show netmap compatible cards in IPS Mode note
- https://github.com/pfsense/FreeBSD-ports/pull/1090
-
02:26 AM Bug #7374 (Closed): Barnyard2 package has incomplete install when installed as Suricata depedency
- Barnyard2 has been removed from both the Snort and Suricata packages.
08/12/2021
-
10:37 PM Bug #12251 (Confirmed): Wireguard 0.1.5 - ignores "KeepAlive" parameter if empty (instead of disabling)
- Restarting the service will work around this in the mean time
-
08:21 PM Bug #12251 (Resolved): Wireguard 0.1.5 - ignores "KeepAlive" parameter if empty (instead of disabling)
- Wireguard pkg 0.1.5
pfSense+ 21.05.1
If "KeepAlive" is left empty, config is written as 30 seconds.
Descriptio... -
02:01 PM Todo #11033 (Closed): Update OpenVPN Client Export with OpenVPN 2.5.0 installer
- Make a new issue for a new request. This was done months ago.
-
01:58 PM Todo #11033: Update OpenVPN Client Export with OpenVPN 2.5.0 installer
- Updating Subject as we need to update the OpenVPN Client Export package for 2.5.3, as it's currently on 2.5.2. Also ...
-
08:55 AM Bug #12101: ArpWatch Suppression Mac for "flip-flop" not suppressing
- I have updated to version 0.2.0_6 and still are getting flip-flop notifications. I have tried restarting the service ...
08/11/2021
-
02:27 PM Bug #12157 (Feedback): Snort exits with Signal 10 on 32bit ARM platforms
-
01:37 PM Bug #12157: Snort exits with Signal 10 on 32bit ARM platforms
- This should be fixed now as https://cgit.freebsd.org/ports/commit/?id=c2a4ab17ef5e44424f2b2e97e30a2fde437dcd8a hit up...
-
11:39 AM Feature #12246 (Closed): Load a file into patch textarea
- The only way of adding a new patch is to paste patch content on `Patch Contentx` text area. It would be useful to be...
-
06:19 AM Bug #12242 (Feedback): rc file is not deleted
- PR has been merged. Thanks!
-
12:20 AM Bug #12242: rc file is not deleted
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/115 -
12:03 AM Bug #12242 (Resolved): rc file is not deleted
- After disabling the Net-SNMP and Net-SNMP trap daemon services, `/usr/local/etc/rc.d/net-snmpd.sh` and `/usr/local/et...
-
06:19 AM Bug #12240 (Feedback): Syslog-ng does not remove logrotate.conf after disable
- PR has been merged. Thanks!
-
06:13 AM Feature #9989 (Rejected): Add FreeBSD port and pfSense plugin for HoneyTrap
- After internal discussion we decided to reject adding this to pfSense. This kind of software doesn't belong to a Fir...
08/10/2021
-
10:55 AM Feature #11210: 3rd party rulesets
- Tested fine here. Only issue I see is the @Delete@ button will remove the @Check MD5@ label as well. Also, when addin...
-
09:16 AM Feature #11210 (Feedback): 3rd party rulesets
- PR has been merged. Thanks!
-
09:39 AM Bug #12240: Syslog-ng does not remove logrotate.conf after disable
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/113 -
09:23 AM Bug #12240 (Resolved): Syslog-ng does not remove logrotate.conf after disable
- @/usr/local/etc/logrotate.conf@ still exists after disabling Syslog-ng
-
09:25 AM Bug #12153 (Feedback): Incorrect Outgoing Network Interface on clean install
- PR has been merged. Thanks!
-
09:25 AM Bug #12167 (Feedback): BGP TCP setkey not set if neighbor is in peer group
- PR has been merged. Thanks!
-
09:23 AM Bug #12204 (Feedback): Certificate Manager page doesn't show Syslog-NG used certificates
- PR has been merged. Thanks!
-
09:18 AM Bug #12101 (Feedback): ArpWatch Suppression Mac for "flip-flop" not suppressing
- PR has been merged. Thanks!
-
09:16 AM Bug #7039 (Feedback): HAProxy backend configuration does not handle intermediate CAs properly
- PR has been merged. Thanks!
08/09/2021
-
05:56 PM Feature #11210: 3rd party rulesets
- https://github.com/pfsense/FreeBSD-ports/pull/1089
-
08:12 AM Bug #11965 (Resolved): Avahi service started twice by /etc/rc.start_package
-
07:53 AM Bug #11965: Avahi service started twice by /etc/rc.start_package
- Solved. Thanks for looking into it.
08/07/2021
-
08:52 PM Bug #12157 (Confirmed): Snort exits with Signal 10 on 32bit ARM platforms
- I've confirmed this behavior on an SG-3100 on 21.05.1 once we fixed the Signal 11 issue in the above-linked redmine. ...
-
03:30 PM Bug #11627 (Resolved): rc file is not deleted
- Tested with arpwatch 0.2.0_5.
/usr/local/etc/rc.d/arpwatch.sh is removed after disabling the service. Marking the...
08/06/2021
-
11:54 PM Bug #12088 (Resolved): Setting Advertise Capability to ORF leads to invalid configuration preventing frr from starting
- Working well. Marking as resolved.
-
10:08 AM Bug #12220 (Rejected): BIND package missing in 2.6.0-DEVELOPMENT
- The package is present on current snapshots. You have some issue locally on your firewall. This site is not for suppo...
-
07:18 AM Bug #11780: Suricata package fails to prune suricata.log
- related discussion:
https://forum.netgate.com/topic/165352/suricata-log-rotation-bug
08/05/2021
-
04:14 PM Bug #12220 (Rejected): BIND package missing in 2.6.0-DEVELOPMENT
- After upgrading to 2.6.0-DEVELOPMENT there is no BIND package anymore.
-
02:11 PM Bug #12101 (Pull Request Review): ArpWatch Suppression Mac for "flip-flop" not suppressing
-
11:45 AM Bug #12101: ArpWatch Suppression Mac for "flip-flop" not suppressing
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/112 -
10:54 AM Regression #12125 (Resolved): squidguard 1.16.18_19 conguration error
- PR merged.
-
10:49 AM Regression #12125 (Feedback): squidguard 1.16.18_19 conguration error
- Merged
-
07:58 AM Regression #12125 (Pull Request Review): squidguard 1.16.18_19 conguration error
-
04:34 AM Regression #12125: squidguard 1.16.18_19 conguration error
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/111 -
07:57 AM Bug #12204 (Pull Request Review): Certificate Manager page doesn't show Syslog-NG used certificates
-
02:35 AM Bug #12204: Certificate Manager page doesn't show Syslog-NG used certificates
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/110
08/04/2021
-
11:50 AM Bug #12206 (Resolved): Certificate Manager page doesn't show Net-SNMP used certificates
- On the system_certmanager.php page, you can see the "In Use" column which reflects the certificates used by IPsec/Ope...
-
11:48 AM Bug #12205 (Resolved): Certificate Manager page doesn't show Squid used certificates
- On the system_certmanager.php page, you can see the "In Use" column which reflects the certificates used by IPsec/Ope...
-
11:47 AM Bug #12204 (Resolved): Certificate Manager page doesn't show Syslog-NG used certificates
- On the system_certmanager.php page, you can see the "In Use" column which reflects the certificates used by IPsec/Ope...
08/02/2021
-
09:04 AM Bug #12188: client export breaks multi remote configurations
- A patch was posted:
https://sourceforge.net/p/openvpn/mailman/openvpn-devel/thread/20210802133127.25000-1-gert%40gre... -
08:15 AM Bug #12188: client export breaks multi remote configurations
- OpenVPN devs were/are aware of this and is currently being looked at.
Maybe a solution is near :)
-
05:19 AM Bug #12188 (New): client export breaks multi remote configurations
- https://forum.netgate.com/topic/165560/1-2-bug-client-export-openvpn-ras-udp-server
Hi,
as stated in above foru...
07/31/2021
-
06:50 PM Bug #12030: Startup Errors for Avahi Package
- Tested in 21.05.1 and this is still a present error:
WARNING: No NSS support for mDNS detected, consider installin... -
12:52 PM Bug #11993 (Resolved): PHP error after disabling HAProxy
- The issue was on the haproxy-devel 0.62_3 version.
Tested on the haproxy-devel 0.62_4 version. There are no any err... -
09:06 AM Regression #12143 (Resolved): frr 1.1.0_12 package won't save OSPF settings unless entry exists in OSPF Networks
- Tested on the frr 1.1.0_13 package. It works fine.
The ticket can be resolved.
07/30/2021
-
07:45 PM Bug #11847: Filters not applied to PEER Groups
- Prefix filter is not showing up in configuration file if there is no added neighbor
router bgp 61000
no bgp ne... -
09:41 AM Bug #10867: squidGuard Package Hangs on Uninstall or Upgrade
- Still seeing this in 21.05. The packahe reinstall process stops at Squidguard with:...
-
08:02 AM Feature #12179 (Confirmed): QEMU package
- Currently, the qemu-guest-agent can be installed from the console. It works fine.
https://redmine.pfsense.org/issues... -
06:58 AM Bug #12178: WireGuard always shows 'Configuring WireGuard tunnels...done.' message on boot
- easy fix, I can get that into next release
-
03:32 AM Bug #12178 (New): WireGuard always shows 'Configuring WireGuard tunnels...done.' message on boot
- WireGuard pkg always shows "Configuring WireGuard Tunnels...done." on boot, whether any tunnels are configured or not...
-
12:59 AM Todo #12175: Error after enable DHCP on Wiregurd
- Great !
-
12:56 AM Todo #12175: Error after enable DHCP on Wiregurd
- Yuri Weinstein wrote in #note-4:
> It’d be great to make this impossible to use then
see #12176
07/29/2021
-
04:47 PM Bug #12088: Setting Advertise Capability to ORF leads to invalid configuration preventing frr from starting
- fixed
selecting ORF (GUI) is added to configuration file :
neighbor 172.17.99.11 capability orf prefix-list b... -
01:13 PM Todo #12175: Error after enable DHCP on Wiregurd
- It’d be great to make this impossible to use then
-
01:00 PM Todo #12175: Error after enable DHCP on Wiregurd
- Todo: Consider this case when working on improvements to base for better handling pseudo-interface types.
-
12:56 PM Todo #12175 (Rejected): Error after enable DHCP on Wiregurd
- This is not a bug. WireGuard is a layer3 tunnel. DHCP operates at layer2. Disable DHCP on your WireGuard interfaces.
... -
12:37 PM Todo #12175 (Rejected): Error after enable DHCP on Wiregurd
- After enabling Wireguard DHCP server, I see error loading DHCP, red status and in the log php-fpm error:...
07/28/2021
-
03:20 PM Bug #12167 (Pull Request Review): BGP TCP setkey not set if neighbor is in peer group
-
04:56 AM Bug #12167: BGP TCP setkey not set if neighbor is in peer group
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/109 -
12:13 AM Feature #12165 (Duplicate): NTPsec
- Is duplicate of #8149
07/26/2021
-
12:44 PM Bug #12058: pfBlockerNG / "Cannot allocate memory" from Geo blocking IP list
- Just a note: this wasn't a one-off. I get this email (just about?) every time I change some firewall setting.
-
12:33 PM Feature #11410: adding bpytop (former Bashtop)
- This is highly unlikely to be added by Netgate staff -- someone in the community will need to create the package and ...
-
12:32 PM Feature #12165: NTPsec
- This is a completely different NTP package than what is in base, so either the base ntpd would need to be switched (u...
-
08:51 AM Bug #12167 (Feedback): BGP TCP setkey not set if neighbor is in peer group
- When a neighbor is a member of a peer group, with *FRR and setkey Bidirectional* enabled with a password, the setkey ...
07/25/2021
-
08:10 PM Feature #12165 (Duplicate): NTPsec
Some basic info here https://blog.ntpsec.org/2019/01/02/starting-nts.html, https://blog.ntpsec.org/2019/01/02/start...-
05:50 PM Feature #11410: adding bpytop (former Bashtop)
- Please, any news ?
07/24/2021
-
11:52 AM Bug #12074 (Resolved): Freeradius: Additional Information field descriptions swapped
- Checked in FreeRADIUS 0.15.7_32. Looks good. The descriptions match the correct fields now. Marking the ticket resolved.
07/23/2021
-
03:27 PM Regression #12160 (Feedback): An invalid configuration is generated when choosing TLS as the default protocol
- PR merged.
-
03:22 PM Regression #12160 (Pull Request Review): An invalid configuration is generated when choosing TLS as the default protocol
-
09:37 AM Regression #12160: An invalid configuration is generated when choosing TLS as the default protocol
- A "pull request":https://github.com/pfsense/FreeBSD-ports/pull/1087 has been created.
-
05:11 AM Regression #12160: An invalid configuration is generated when choosing TLS as the default protocol
- A solution has been proposed "here":https://github.com/pfsense/FreeBSD-ports/commit/a5b1eda67c40592e14806a4a4bbdd946f...
-
05:07 AM Regression #12160 (Resolved): An invalid configuration is generated when choosing TLS as the default protocol
- This regression was introduced by "this":https://github.com/pfsense/FreeBSD-ports/commit/a5b1eda67c40592e14806a4a4bbd...
07/22/2021
-
02:28 PM Bug #8454: Arpwatch package break email notifications from other sources
- Ter Ted wrote in #note-11:
> It was very annoying, I don't understand why it can't be fixed.
Agree. It is always ... -
10:02 AM Bug #12137 (Resolved): PHP error after rulesets update
-
09:50 AM Bug #12137: PHP error after rulesets update
- This fix has been merged into both the RELEASE and DEVEL branches via pull request: https://github.com/pfsense/FreeB...
-
09:45 AM Bug #12157 (Resolved): Snort exits with Signal 10 on 32bit ARM platforms
- After enabling Snort it fails to start or crashes shortly after logging:...
-
05:53 AM Bug #12083 (Resolved): Lack of OSPF network input validation causes service startup error
- Tested with the frr 1.1.0_13.
Input validation works fine. -
05:28 AM Bug #12080 (Resolved): Setting a route-map to redistribute in BGP leads to invalid configuration preventing frr from starting
- Tested on the frr 1.1.0_13.
It works fine.
07/21/2021
-
07:26 AM Bug #12126: freeradius3 0.15.7_31
- may be related to #11582 #11802
-
07:24 AM Bug #11980 (Feedback): EAP does not work with SQL backend
-
07:17 AM Bug #12153 (Pull Request Review): Incorrect Outgoing Network Interface on clean install
-
03:16 AM Bug #12153: Incorrect Outgoing Network Interface on clean install
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/107 -
03:08 AM Bug #12153 (Resolved): Incorrect Outgoing Network Interface on clean install
- After a clean installation of the Squid package, Outgoing Network Interface = "LAN"
Should be "Default (auto)" -
06:46 AM Feature #11827: Please include acme deploy folder/scripts
- +1 for that feature
07/20/2021
-
06:21 AM Bug #12128 (Resolved): Zabbix Agent 5 1.0.4_8 and Proxy 5 1.0.4_7 Broken
-
06:14 AM Bug #12142 (Feedback): XMLRPC replication target configuration
- PR has been merged. Thanks!
07/19/2021
-
11:05 AM Bug #12142 (Pull Request Review): XMLRPC replication target configuration
-
05:13 AM Bug #12142: XMLRPC replication target configuration
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/106 -
10:30 AM Regression #12143 (Feedback): frr 1.1.0_12 package won't save OSPF settings unless entry exists in OSPF Networks
- PR has been merged. Thanks!
-
09:07 AM Regression #12143 (Pull Request Review): frr 1.1.0_12 package won't save OSPF settings unless entry exists in OSPF Networks
-
03:21 AM Regression #12143: frr 1.1.0_12 package won't save OSPF settings unless entry exists in OSPF Networks
- fix:
https://gitlab.netgate.com/pfSense/FreeBSD-ports/-/merge_requests/105 -
03:14 AM Regression #12143 (Resolved): frr 1.1.0_12 package won't save OSPF settings unless entry exists in OSPF Networks
- https://forum.netgate.com/topic/165160/frr-1-1-0_12-package-won-t-save-ospf-settings-unless-entry-exists-in-ospf-netw...
-
08:59 AM Bug #7039 (Pull Request Review): HAProxy backend configuration does not handle intermediate CAs properly
07/18/2021
-
04:43 PM Bug #12137: PHP error after rulesets update
- I already have a fix for this applied in my internal package repo. The same potential bug exists in the Suricata pack...
-
04:43 AM Bug #12142 (Resolved): XMLRPC replication target configuration
- After upgrading from 2.5.1, the following error message appears in the log of the primary node of our HA cluster:
...
07/17/2021
-
10:52 PM Bug #10983 (Rejected): pfBlockerNG not cleaning everything behind it
- Updating as Rejected as the bug can not be reproduced.
-
10:39 PM Bug #11745 (Resolved): Incorrect compress options in exported configuration when server is set to refuse compression
- Created a test OpenVPN server with compress disabled and exported a config. I do not see compress in the config so t...
-
07:52 AM Regression #12140 (Closed): DNSBL https webserver not working
- After upgrade to pfSense 2.5.2 the DNSBL webserver seems to be broken on https (http works). Multiple people are expe...
-
04:07 AM Bug #7039: HAProxy backend configuration does not handle intermediate CAs properly
- Submitted a "PR":https://github.com/pfsense/FreeBSD-ports/pull/1083 to resolve this issue.
07/16/2021
-
12:44 PM Bug #11173 (Resolved): Status>Monitoring parameters are hidden by the interactive graph
- Now works on Firefox and Edge/Chromium.
On mobile resolutions, some labels clip on the right instead, though I thi... -
11:13 AM Bug #12131 (Resolved): zabbix-proxy54 database is down
-
09:33 AM Bug #12131: zabbix-proxy54 database is down
- Renato Botelho wrote:
> Commit that defines zabbix-proxy 5.4 options was missing on stable branches. Fixed on versi... -
06:32 AM Bug #12131 (Feedback): zabbix-proxy54 database is down
- Commit that defines zabbix-proxy 5.4 options was missing on stable branches. Fixed on version 1.0.4_9
-
02:18 AM Bug #12131: zabbix-proxy54 database is down
- at the same time:
https://github.com/pfsense/pfsense/blob/master/tools/conf/pfPorts/make.conf#L119:... -
02:15 AM Bug #12131: zabbix-proxy54 database is down
- Zabbix Proxy 5.4 package doesn't create /var/db/zabbix-proxy/proxy.db file
from https://www.zabbix.com/documentation... -
11:13 AM Feature #12042 (Resolved): Add Zabbix 5.4 agent and proxy packages
-
09:36 AM Feature #12042: Add Zabbix 5.4 agent and proxy packages
- Jeff Dairiki wrote:
>
> I'm still having the "@connection to database '/var/db/zabbix-proxy/proxy.db' failed@" iss... -
11:07 AM Bug #12126: freeradius3 0.15.7_31
- Please attach the `radiusd -X` command output during authentication and the /usr/local/etc/raddb/radiusd.conf file
... -
06:17 AM Bug #12137 (Resolved): PHP error after rulesets update
- After fresh Snort install, if you configure the rules update and run "Force Update", an error occurs if the interface...
-
05:50 AM Bug #12129 (Resolved): extra include_file entry
Also available in: Atom