Activity
From 02/19/2023 to 03/20/2023
03/20/2023
-
07:21 PM Regression #14137 (Resolved): pfSense Plus Upgrade repo data remains on the system after upgradng
- After upgrading from CE to pfSense Plus the repo data used for that should be removed from the firewall leaving it us...
-
04:38 AM Bug #14135: iOT Devices not reconnecting properly
- I forgot to mention we also tested this with a Sony TV (1 year old and up to date Firmware) on an ethernet connection...
-
- IOT Devices of different manufacturers all seem to have this problem and while the problem is being experienced I wou...
-
- Yaroslav Semenenko wrote:
> Hello,
>
> I have Netgate 2100.
> Unbound service is needed to restart sometimes due... -
- A notifier on the Main Landing page under the Current PfSense Version number that lets you also know if your packages...
-
- Please change Backup & Restore to allow for choosing only what areas you want to import/export without having to do i...
-
- This problem is hard to describe so I'll give as much information as possible as best as I can.
-Alias was created... -
- Please add Dynamic DNS provider DYNU
https://www.dynu.com/en-US/
It's working now but sometimes won't update an...
03/19/2023
-
10:52 PM Bug #14129 (Resolved): Chelsio T520 unable to route past 470Mbps
- Chelsio T520-CR and T420-CR are unable to route speeds over 470mbps when updated to 23.01 code. Goes to full 1gb spee...
-
04:01 PM Bug #12974 (Closed): Typing anything into 1100/2100 recovery installer causes process to stop
- This should be closed. Updating to reflect.
-
02:33 AM Feature #14125 (New): Add Cateogory field to Available Packages Tab like Installed Packages Tab
- Under the Installed Packages the header fields have the following listed at the top Name Category Version Description...
03/18/2023
-
08:02 PM Bug #14074: Cannot edit or delete ZFS Boot Environment with a name containing only numbers
- i installed the patch.
it renamed the two broken boot environments with the name i originally gave them, swapping ... -
04:57 PM Bug #14074: Cannot edit or delete ZFS Boot Environment with a name containing only numbers
- The patch works well. I'm not hitting any of the problems I encountered previously. *It only applies to the currently...
-
01:57 PM Bug #14074 (Pull Request Review): Cannot edit or delete ZFS Boot Environment with a name containing only numbers
- https://gitlab.netgate.com/pfSense/factory/-/merge_requests/94
-
- I was able to reproduce this by cloning the default environment, naming it 20230318 (today's date), no description. C...
03/17/2023
-
06:16 PM Bug #13967 (Feedback): aarch64 23.01 upgrade can fail to write the bootloader
- Fix has been released to the world this week.
03/15/2023
-
02:40 PM Feature #14112 (Duplicate): Allow user to trigger license re-sync and/or reset in system_register.php
- We already have an internal issue for this.
-
- LDAP client certs are only available on Plus.
03/14/2023
-
08:44 PM Feature #14112 (Duplicate): Allow user to trigger license re-sync and/or reset in system_register.php
- There may be a case for adding some buttons in system_register.php that allow the user to 1) Force the existing pfSen...
-
10:41 AM Bug #14106 (New): arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
- 23.01 is now showing this error after a fresh firmware install on a Netgate 2100-MAX system. It will continue to boot...
-
08:08 AM Regression #13895: Early boot hangs on Hyper-V with Gen2 VMs
- Thanks Chris.
While this doesn't solve your immediate situation, it looks like repro is possible with Windows Serv... -
03:11 AM Bug #14104 (New): Google LDAP connections still fail even after adding SNI for TLS 1.3
- tested on 23.01 and with IPv6
After fixing https://redmine.pfsense.org/issues/11626 I see that the LDAP client is ...
03/13/2023
-
09:17 PM Regression #13895: Early boot hangs on Hyper-V with Gen2 VMs
- Here is a screenshot of the memmap command on an affect VM. This machine is on Windows Server 2022. The Pfsense VM ...
-
- The console menu is intended to only show menu option 99 'Install to device' if pfSense is not running from eMMC or S...
-
- Bill McGonigle wrote in #note-4:
> Is the patch world-readable anywhere? I have affected hardware and the System Pa... -
01:08 PM Regression #13824: CPU/Crypto Detection for the 3100 is not functioning properly
- Is the patch world-readable anywhere? I have affected hardware and the System Patches feature can't resolve this com...
-
- Duplicate of #13976
-
09:26 AM Regression #14099 (Duplicate): snmpd SIOCGIFDESCR (e6000sw0port1): Device not configured
- See bug #8600
-
- This bug seems to have popped up again on my SG-3100 after upgrading to 23.01.
03/11/2023
-
09:37 PM Feature #13786: ldap intergration for firewall rules
- Mike Moore wrote in #note-4:
> So there is no way in the future to create a LAN rule stating
> Src: AD/mmoore
> Ds... -
- There is already an option to reinstall packages from Diagnostics --> Backup and Restore. It would be beneficial for...
-
- Typically right now we also have issues with the installer converting from gmirror to ZFS. Haven't tested since 22.0...
-
12:30 PM Bug #13981 (Resolved): PHP Error on ``status_interfaces.php`` with empty switch VLAN group configuration and assigned VLAN interfaces
- Replicated the issue on SG-2100....
03/10/2023
-
- Kris Phillips wrote in #note-2:
> The message of "Unknown CA" is what pfSense is sending to the remote host. This w... -
- Jim Pingle wrote in #note-1:
> Allowing multiple CAs in a single entry was always a hackish workaround for things th...
03/09/2023
-
- When testing with a customer, when a remote host has a large number of new states being created, then transitioning t...
-
07:02 AM Bug #14085 (New): QAT not working / same speed as AES-NI with CPIC-8955!
- My post on the netgate forum, still no unanswer:
https://forum.netgate.com/topic/175096/ipsec-with-qat-low-performan...
03/08/2023
-
- I can't repro it in Win-11 Hyper-V. 4GB, ZFS, 3 NICs, ISO still attached.
In the loader prompt (option 3), can you... -
- Reid Linnemann wrote in #note-2:
> Do we want to cut the cord on UFS and just be done with it?
UFS is OK and not ...
03/07/2023
-
- Do we want to cut the cord on UFS and just be done with it?
-
- You can get past that point by manually setting the UFS slice on the mirror to mount at @/@ though it still fails eve...
-
- The 23.01 installer fails to create the expected mount points when trying to reinstall UFS to an existing gmirror.
... -
- more experimentation
if i create a new environment with the same name as the old damaged ones (now 0 or 1) it create...
03/06/2023
-
- Fix for this is introduced into pfSense-updgrade at revision 2c4bf3c in plus packages only at this time. pfSense-upgr...
-
- did some more trials, and found if i just use the date as 20230306 it does it.
named it 20230306, the other day i na... -
- to get the initial issue;
what i did; i didnt read the limitation of what characters could be used, and used a "-"... -
- There must be some additional steps needed to replicate the problem. I tried a 23.01 system here and I could create a...
-
- now that it has this new boot environment '0' if i try to edit it, it makes a new boot environment. Each time.
ho... -
- Allowing multiple CAs in a single entry was always a hackish workaround for things that didn't support chains. Import...
03/05/2023
-
03:43 PM Regression #13895: Early boot hangs on Hyper-V with Gen2 VMs
- This can be replicated on Azure as well. Deploy a new pfSense+ 23.01 Gen 2 VM on Azure with a size which allows addin...
-
- Are you able to replicate this reliably? If so, please detail the steps to do so.
-
i just created a new boot environment, but it apparently didnt like the name i gave it and set it to '0'
It cann...
03/03/2023
-
- Previously, including the entire CA chain as well as the client certificate in the certificate under System --> Cert ...
-
09:20 AM Feature #14066 (New): Add line number to rules and insert option
- From a rule management perspective, is it possible to do the following:
1. Add line numbers in the GUI. So an admin ...
02/28/2023
-
- Ryan Coleman wrote in #note-5:
> Ok so it is not available to 23.01 -- it would have to be a point release then?
... -
- This behavior has existed for as long as I can remember. For example, the "Getting Started" guides for all appliances...
02/27/2023
-
04:02 PM Bug #14044 (Not a Bug): After upgrade to 23.01, firewall will not route traffic anymore to the Internet
- After upgrading to 23.01, if the WAN interface receives an IP address from the same range of addresses as configured ...
-
- Jim Pingle wrote in #note-4:
> Ryan Coleman wrote in #note-3:
> > Luiz Souza wrote in #note-1:
> > > Fixed in 23.... -
- Ryan Coleman wrote in #note-3:
> Luiz Souza wrote in #note-1:
> > Fixed in 23.05 and also in the 23.01 branch.
> ... -
- This appears to be the same as #8600 and to fix it then, we suppressed that error.
-
07:44 AM Bug #13976: SNMP logs "Device not configured" error message when queries involve built-in switch port interfaces
- Ditto. Same here after upgrading HA 7100's from 22.05 to 23.01....
02/26/2023
-
- Luiz Souza wrote in #note-1:
> Fixed in 23.05 and also in the 23.01 branch.
I don't see any recommended patches -...
02/25/2023
-
07:13 PM Regression #13993: Switch ports on 7100/1100/2100 do not have Auto MDI-X support enabled
- running version 23.05.a.20230224.0600 on 7100 I am again able to successfully connect with 1100, this was not working...
02/24/2023
-
05:47 PM Feature #14012: ZFS memory usage graphs
- This feature request is probably related: zfs GUI functionality - alerts https://redmine.pfsense.org/issues/9226 but ...
02/22/2023
-
03:22 PM Regression #13993 (Feedback): Switch ports on 7100/1100/2100 do not have Auto MDI-X support enabled
- Fixed in 23.05 and also in the 23.01 branch.
-
02:38 PM Feature #14017 (New): Ability to remove all packages before upgardes with saved configuration
- Currently, every time when a new upgrade is available the first thing recommended to do is uninstalling all packages....
-
02:24 PM Bug #14005: SFP Interfaces not available with Traffic Shaper in v23.01
- !pfsense-22.05.png!
!pfsense-23.01.png!
-
10:22 AM Bug #13975: when assigning a vlan to wan interface configured mac address is not used
- I've done some more testing.
I now have the physical interface igc0 set as opt1. In that interface is set the want... -
- It's becoming increasingly relevant for users to monitor ZFS memory usage, especially ARC usage. This is ideal as a s...
-
- Fix committed to plus tree (@5841d5850265476100b719e60e38b65887cd1460@).
You can install the "System Patches packa... -
- To trigger this you also need at least one assigned VLAN tagged interface -- it need not be on the switch interface.
-
02/21/2023
-
- I have dual Netgate 1541 in HA mode. The SFP interfaces LAN (cxl1) and WAN (cxl0) are not available for configuration...
02/20/2023
-
- In 23.01 the 7100 switch ports do not support auto-MDI/X. A cross-over cable is required to link two ports on the swi...
02/19/2023
-
- For reference, the @<vlangroups>@ element in @/cf/conf/config.xml@ can be removed to work around the issue (e.g. by u...
-
- This is triggered by the presence of empty <vlangroups> tags in the switch config which are not usually there.
The... -
- For reference, the firmware may be re-installed (rather than upgraded) to work around the issue.
Also available in: Atom