Activity
From 01/11/2013 to 02/09/2013
02/09/2013
-
12:41 PM Bug #2728: PPP WAN types do not obtain DNS servers properly in 2.0.2-RELEASE
- mount root filesystem rw (on embedded systems) using ...
-
10:30 AM Bug #2805 (Feedback): Firewall Rules Interface select causes javascript error
- Applied in changeset commit:8c59ce016bb2035d42568a1ada096e7835dea2e4.
02/08/2013
-
10:22 PM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Chris Ogden wrote:
> I am not getting the driver does not support altq error but I can't ping across my vlans anymor... -
- I am not getting the driver does not support altq error but I can't ping across my vlans anymore. Devices on each vla...
-
- On the latest snapshot (built on Fri Feb 8 17:16:16 EST 2013) when I go to my firewall rules, I can't select a differ...
-
04:56 PM Feature #385: Allow the use of Captive Portal to restrict services on the firewall itself.
- Has there been any more activity on this feature request? I would love to use pfSense with the described functionalit...
-
03:06 PM Bug #2798: Captive Portal does not capture anyone
- The clients listed in there were from before I saved the rules. Any new people connecting through the CP don't get ...
-
- ...
-
08:41 AM Bug #2756: SNMPD problems when binding pppoe interface
- yes i use the snapshot from today
after boot the service wont start
but the worst problem is after a while it j... -
08:38 AM Bug #2756: SNMPD problems when binding pppoe interface
- I couldn't find anything wrong on your config and couldn't reproduce it locally. Let me just ask you some questions t...
-
- send u an email
-
- Can you post your config.xml here or send it direct to me (garga@pfsense.org)?
-
- after restart the service doesn't start
-
- It's not done yet, need to check the other way. If you try to set the same IP used on localip for mpd based as a stat...
-
-
- Are you using a recent snapshot?
Does this problem happen only when you configure it or during the boot too?
Is dhc... -
02:07 AM Bug #2803: igmp version reset
- Additional info: this morning I rebooted pfSense and after several hours tried to open the stream. igmp v3 appeared a...
02/07/2013
-
11:18 PM Bug #2789: Bug with DHCPD, with the last upgrade from 2.1
- Hello,
Ihave the same problème .
Do you want to enable the DHCP server on LAN? [y|n] y
Enter the start address... -
- Here is an excerpt from the system.log for that small period:...
-
04:54 PM Bug #2803: igmp version reset
- More information is needed here rather than this.
Some packet traces and system logs would be useful.
Debugging log... -
- There is additional package installed - udpxy, which translates http requests into udp multicast (www.udpxy.com):
# ... -
- Version 2.0.2-RELEASE (i386)
built on Fri Dec 7 16:30:38 EST 2012
FreeBSD 8.1-RELEASE-p13
"net.inet.igmp.defaul... -
- Duplicate of #2433
-
- IS this an issue or not?
If yes, provide input when you reproduce this with ipfw -x $zone show, ipfw -x $zone table ... -
- This should work better on 2.0.3 and later.
-
- Applied in changeset pfsense-tools:commit:b983c67530b9d8beaf6d37d9a1d842b68ff24bba.
-
- Patch has been committed and will be present on newer snapshots.
-
- thank you
-
- Already fixed in the repo, wait for new snapshots and test.
-
- RULES are not working anymore also
-
- After adding an EasyRule BlockHostsLAN
all Alias fields look like this
see attachment
-
- ok i did it
php test_snmpd.php without error
so i will let u know after 24h
thanks -
- The commit commit:1b7ec6ba16 should address this. Could you make this change to services.inc and test it again?
-
- that is the output :
Fatal error: Call to undefined function sigkillbypid() in /etc/inc/services.inc on line 1633
... -
- Could you please create a file called test_snmpd.php with the following content:...
-
- still the same problem after reboot it wont start, i have to start it manual
2.1-BETA1 (i386)
built on Wed Fe... -
- You still have same problems or it's a different one?
-
- snmp doesnt even work right data for pppoe and some vlan interfaces are not available ! even after re install with o...
-
- Applied in changeset commit:a8cb003844c8feda083925415d9cfc96d5f3827f.
-
- I also committed a couple fixes yesterday that made it work for more situations. It was working if you entered the su...
-
- I pushed some fixes for exactly the issue you mentioned Andre.
-
06:03 AM Feature #2802: Add Test button/feature to LDAP Authentication Servers settings
- (Actually, the page I found was /system_usermanager_settings_test.php?authserver=UCS which even shows me the PHP Warn...
-
- I just found this page myself by grepping through the PHP code. I would never have looked there based on the setting...
-
05:54 AM Feature #2802 (Closed): Add Test button/feature to LDAP Authentication Servers settings
- Diag>Auth is there that does just this.
-
- I'm currently debugging LDAP authentication for OpenVPN and doing so is quite convoluted; currently I went down to th...
-
- I am currently debugging PHP authentication for OpenVPN and when running the script from the shell I got a PHP Warnin...
-
- There are two places where working with chained certificates is broken or at least weird. Background: OpenVPN alway...
-
- The original problem described in this ticket is fixed in 2.1. About the other change you are requesting, please open...
-
- Thank you for the reply.
-
03:10 AM Bug #2613: Incoming traffic on a vlan is not seen
- Yes,
It's working as expected. -
- Can this be confirmed as solved?
02/06/2013
-
01:43 PM
Feature #1388: 3G outbound failover connection with auto dial-up and hang-up
- Its wery need future. I live in Ukraine, main conection is ADSL. Sometimes conection down. I wood like to use reserve...
-
01:20 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- I have a different opinion:
Acct-Status-Type indicates when a user is stating a service (start) or is ending a servi... -
- That is something really strange since dhcpd is the responsible to sabe pid there.
Could you please try to kill an... -
-
-
- Applied in changeset commit:cba9d7d9a5edd4d2b49768a536740b288da99300.
-
- I just removed and readded my v6 gateway and LAN then did a reboot and its working.
-
- I also looked through the other CP bugs and fixes and noticed that I didn't have net.link.ether.ipfw and net.inet.ip....
-
- Can you attach a copy of your config.xml with the broken configuration?
You can remove passwords, keys, etc. Mostly ... -
- While testing the snapshot of Feb 5th, 2013, I noticed that the captive portal is not capturing anyone after removing...
-
08:50 AM Bug #2677 (Feedback): Dyndns debug file written with ascii string \n instead of line-feed
- Applied in changeset commit:bb9ccd636ee9331064319d202f80409280a22934.
-
-
- This has been fixed some time ago and does not occur anymore.
-
- Looks like it should be fixed by this:
https://github.com/bsdperimeter/pfsense/compare/0715ad5093...8614752831 -
07:10 AM
Bug #1629: invalid state table entries after WAN IP change
- Does not work, sorry. Only the "Out" states are flushed. The "In" states persist and seem to remember their gateway. ...
02/05/2013
-
08:30 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- I would suggest any RADIUS server that can't work with interim update packets is not one worth using. They have been ...
-
- The rlm_counter module is just counting on accounting stop packets. This module is used for time based accounting. It...
-
- The connect button on the IPsec status page tries to determine a source IP on the firewall from which to send a ping ...
-
-
- Patch has been corrected behaviour should be better.
-
- This is scrub in action.
Will see how to make this behave normally. -
- A fix to require correct mask was submitted on master.
-
- Seems the patch I submitted has disappeared; if there is still interest I will submit a pull request at github.com to...
-
- Applied in changeset commit:f73e35319a7f36c761cadac132c2f3484103b88f.
-
- Patch committed.
-
- A patch has been committed which should improve the situation
-
- Pull request 378 merged
-
08:11 AM Bug #2795: PHP Error on pkg_edit.php
- Will do :)
-
- Can you submit these as pull requests on github since you have suggested (and presumably tested) the fixes? Less room...
-
- Fatal error: Cannot use string offset as an array in /usr/local/www/pkg_edit.php on line 109
Error also exists on ... -
- Pull request 378 merged
-
- Fatal error: Cannot use string offset as an array in /usr/local/www/status_upnp.php on line 66
Fix is to change li... -
- Applied in changeset commit:506c6bee8994ed17f16c56a5c7e2ed4085f76846.
-
- Applied in changeset commit:d2b2872afa2e7d36c6cb7c30b8885cff8147985e.
-
- Fatal error: Cannot use string offset as an array in /usr/local/www/services_ntpd.php on line 43
Caused by $config... -
- Applied in changeset commit:ee132ba1db9cfa49b60a5f32e49ced29d366bf35.
-
12:15 AM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- I have sent you the requested information.
02/04/2013
-
- I can't get the VM to stay up long enough to capture or submit a full dump, but here is what I was able to get:
Ma... -
05:50 PM Bug #2412: inbound 6to4 traffic does not work in pf
- I'm still seeing this issue with today's (Feb 4) snapshot. Using a comcast 6to4 tunnel.
Example test ping6 from ... -
- This happens on RELENG_2_0 as well so we'll need to pull back the fix there as well if any pfSense code changes are r...
-
- If an ethernet interface's link goes down and up too rapidly, the 'up' event sent by pfSctl ("linkup start") can be i...
-
- Applied in changeset commit:56756d31a2aebba3e15255129a339464f2699f3e.
-
- If you attempt to add a gateway from Interfaces > WAN and the gateway name already exists, an alert pops up telling t...
-
- Check with later coming snapshot there was a problem with the patch that has been corrected.
-
- Can you show me what kind of rules you ahve configured on your OPT WAN?
Also the contents of /tmp/rules.debug and pf... -
- vi /var/dhcpd/var/run/dhcpd.pid :
ov-uu4
thank's -
-
- Could you please post here the content of /var/dhcpd/var/run/dhcpd.pid?
-
- When a big IPv6 address is used, gateway column doesn't respect widget size, see attached picture.
-
- Could you please send it in diff format or submit a Pull Request at github? It's hard to track exactly what changes y...
-
02/03/2013
-
- I'm curious what the use case is for "start/stop accounting" at all?
Transparently restricting every session to 60... -
- Pull request is still up to date, if there is any interest in checking it in.
-
08:15 AM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- Unfortunately there's no change with today's snapshot.
2.1-BETA1 (amd64)
built on Sat Feb 2 21:38:38 EST 2013
Fr... -
05:15 AM
Bug #1629: invalid state table entries after WAN IP change
- Does not work for me.
Correct me if I'm mistaken here, but can
@pfctl -i@
work without binding states to interface...
02/01/2013
-
- DHCPD don't start. It try to start it but it not possible. tank's
Message : Disabling DHCPD...pgrep: Invalid pid i... -
05:40 PM Bug #2788: After a reboot the lan route have the false interface
- many thanks for your fast reply!
I do this
greatings from germany -
- this is very unlikely to be a bug, and is lacking required details to be a legit bug report. Please post to the forum...
-
- After Upgrading to the latest Beta1 Version the routing after reboot are a little bit confused.
My Environment (sh... -
- Applied in changeset pfsense-tools:commit:4606f313f2c0a6e447dbf025821f24235669f883.
-
- Applied in changeset commit:25c088de57be43155d7f7df202f800016d5f515d.
-
-
-
- You have to try a today snapshot or 31st one because that one does not have the patches applied.
01/31/2013
-
- I spent some time debugging it and noted what is happening.
1. When interface_bring_down() is called and $ifcfgo i... -
- Alias address are being set before main address when IPv6 is set to Track, it is fixed now.
-
- Reopen it since I could reproduce locally
-
02:12 AM Bug #2780: CP: passthough has no effect
- Sorry for the delay, here's the result:
[2.1-BETA1][root@pfsense.domain.local]/root(1): sysctl -a | grep net.link....
01/30/2013
-
02:23 PM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- I tried with the latest build:
2.1-BETA1 (amd64)
built on Wed Jan 30 04:52:20 EST 2013
The bug is still present... -
- Can you try with later snapshots.
This should be fixed. -
- Applied in changeset commit:0a0b17d90dd59ae1a743408bd0a67baa1f8f2ec9.
-
- At some point this was fixed or some other change fixed it, as it still shows /128 prefix but it works fully now. A r...
-
-
-
- Is this issue still happening on recent snapshots? I couldn't reproduce it here, it worked fine when both radius serv...
-
- Still the same ... maybe i should reinstall it ...
-
- Applied in changeset commit:c87f4b709261187cb5e76accde933404d81868f2.
-
- Can you test with latest snapshots and see if it behaves better?
-
- This should be fixed by commit requiring that on floating rules you specify the gateway.
At least for 2.1 -
- Applied in changeset commit:a6bc492fecd64a3a9f3b4cc4a003d6761494a694.
-
- Ok i went and did another implementation fix for this.
Can you please try with later 2.1 snapshots and see if it beh...
01/29/2013
-
- When altering the MTU on a VLAN, the physical interface needs to follow. Currently it does not, and you have to assig...
-
- No need to submit both.
-
- HP MSM series access controllers have vendor-specific attributes to control bandwidth and redirection URLs. Pull requ...
-
- Pull request 357 was merged.
-
- That pull request was not for this issue. Please see https://github.com/bsdperimeter/pfsense/pull/357 for the patch a...
-
- Applied in changeset commit:49b76122af0846474f65eaf73e0e879e24fb554c.
-
- This should be possible now but there is a new issue holding it back. Now that we can assign a gateway group as the "...
-
10:30 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- tried it still same, clients upload speed exceeds limiter values
-
- yes its ticked, trying without that now but if we untick then i guess in the past there was a problem of traffic for ...
-
- Can you try by removing the quick option on the match rules, if you have selected it?
-
- plz remove post after u have read it
-
- In that forum post i do not see any limiters configured on the ruleset posted.
So please provide the information if ... -
- Already fixed in the repo.
-
- This is the message :
Fatal error : call it undefined function unet () in /etc /inc/interfaces.inc on line 3321 -
07:39 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- 2.1-BETA1 (amd64)
built on Mon Jan 21 16:42:50 EST 2013
FreeBSD 8.3-RELEASE-p5
After unplugging then replugging ... -
-
04:43 AM Bug #2783: Cannot access vouchers tab
- I installed a newer build and really the problem disappeared;
Thanks -
- Check later snapshots
01/28/2013
-
- this was discussed here
http://forum.pfsense.org/index.php/topic,56092.0.html
the easy way to test this is, enabl... -
- Can you provide any analysis of how you do your checking?
Also provide a ... -
- does seem to work still, upnp devices bypass limiter
-
- After creating a new zone on LAN interface and set Auth to "Local Users", I click on "Vouchers" tab and it back to zo...
-
01:24 PM Bug #2780: CP: passthough has no effect
- I have the same problem using build Jan 28 08:16:34 EST 2013
Both net.link.ether.ipfw and net.inet.ip.fw.one_pass ... -
- Can you check the following sysctl values
net.link.ether.ipfw net.inet.ip.fw.one_pass
they should be 1 on both.
Als... -
- I've just tested snapshot Jan 27. MAC passthrough seems to be working fine, but Allowed IP addresses are not. Here's ...
-
- Its internal to apinger and a 'protection'.
I will double check again to see if it can be fixed. -
- when i enable RIP i get errors in system log when i have 2 WANs from same isp so the gateway is same which causes thi...
-
- routing protocols like RIP aren't multi-WAN relevant, especially not as a bug.
-
- RIP actually has the feature to be multiwan aware but pfsense needs some gui patches as well as some minor code chang...
-
- There was a bug on functions that convert rrd databases to new format during upgrade. It was fixed and this fix shoul...
-
08:08 AM Feature #2781: Hierarchical view of "Status-Queues" page
- Of course! I wanted to receive some feedback on this idea before just doing/publishing it...
To make it work, I a... -
- Hello Michele,
This is a good idea. Could you please do it and send a pull request on pfsense project at github [1... -
- Hello,
I'd like to change a little bit the "Status-Queues" page, adding a "hierarchical" view in order to show ... -
-
01/27/2013
-
- FIx has been included and should behave better in the later coming snapshots.
-
- The direction support has been removed in commit [1] but the "Allowed Hostnames" configuration still shows the form f...
-
- @Ermal:
It seems that when configuring pipes the context argument is not correctly handled.
ipfw -x guest pip... -
- Here's the result (wifi is the name of my CP zone)
[2.1-BETA1][root@pfsense.domain.local]/root(1): ipfw -x wifi sh... -
- Can you show ...
-
- Also snapshots dated today or later contain ipsec-tools version 0.8.1, so it's worth trying again on a new snapshot. ...
-
- You used teh suggestions from Jim especially disabling prefer old ipsec sa?
-
08:34 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- I am running into this issue on 2.1 BETA. I have tried all
Connecting the first time after restart of racoon wor...
01/26/2013
-
08:04 PM
Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Here is my raw config.xml & /tmp/rules.debug
http://m37offroading.ca/PFSENSE/config.xml
http://m37offroading.c... -
- Robert Stefanovic wrote:
> Ok , So you know what. That's fine. You guy's dont think it's a bug.. It's pathetic PFSen... -
03:58 AM
Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Ok , So you know what. That's fine. You guy's dont think it's a bug.. It's pathetic PFSense is the most powerful open...
-
- http://redmine.pfsense.org/issues/2164
Can you check this ticket, read the last post of that ticket and the coresp... -
- Hi,
users in the following two pfsense forum threads applied the patch from Ermal Luçi with success.
Adding the p... -
- I've just updated to Jan 25 snapshot (amd64) and passthrough (MAC or IP address) doesn't work anymore. It seems to ha...
-
- PRobably because you are missing a gid.
please move this to forum. -
02:32 PM pfSense Packages Bug #2779 (Rejected): Snort unexpectedly terminates / signal 11 error
- Hello, It's not a hardware issue, I tested on several pc-s Intel and AMD processors, It seems to be a rule issue, Whe...
01/25/2013
-
- Please discuss it on the forum until a developer confirms a bug exists.
You still could have a configuration issue... -
09:01 PM
Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- I have had the exact same issue. So we already know it's multiple affected users.
The issue is in the default ro... -
- This seems occasional since not many have reported it.
-
- Applied in changeset pfsense-tools:commit:6f436e9ddf46e64e9b6d87d587a63242b4063d0d.
-
-
- Applied in changeset commit:fb6079dbaf63aa994d8039788d60dac48eb99986.
-
- If you could get the raw filter.log entries for these, that would be helpful in adjusting the parser to compensate.
-
-
- For bootup issues i pushed a fix to create the clone early.
For reconfigure it should not be an issue since interfac... -
- This is no issue nowdays.
-
- This should behave even better with latest snapshots.
-
- Merged the pull request.
-
- Looking at this http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666517
Seems to not be a dnsmasq issue per se! -
- Applied in changeset commit:7ee0f3a8869274874540024f97bd43880ee42082.
-
-
-
- Can you please try new snapshots.
This hsould not be happening anymore. -
- Variable prefix for ipv4 has been committed.
GUI fixes are needed to be done now to allow this to be configured. -
- Applied in changeset commit:c251f8ccc84a7595bb14ccdd9754321c54762eaf.
-
06:40 AM Bug #2763: Dynamic Firewall logs doesn't add new rows
- I'd agree with that, the reason I hadn't noticed was that in [my version] of Chrome, I don't see the alignment proble...
-
- Column widths looks good with new values, but rows height doesn't. Take a look at new attachments, seems the Act icon...
-
- I'm guessing that you mean the column headers? I just copied across the span width values onto the column headers, bu...
-
- For now we can just document this behavior and revisit the question for 2.2. I think it's OK how it is for 2.1 so lon...
-
- Not a bug.
[[http://doc.pfsense.org/index.php/Why_can%27t_I_query_SNMP,_use_syslog,_NTP,_or_other_services_initiated... -
07:30 AM Bug #2778 (Rejected): syslog - VPN IPSec - routing
- topology:
Site A 192.168.252.0/24 <----IpSec----> Site B 172.16.0.0/16
the serveur syslog-ng is 172.16.0.109 on... -
-
12:36 AM
Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- I tested with the following build and the issue is not present for me any more:
2.1-BETA1 (amd64)
built on Thu Ja... -
- i did post at the freebsd forum and also somewhere on mpd long time back but hardly any1 replied, few suggestions wer...
01/24/2013
-
- we at least need the option to wipe the entire state table upon IP change.
-
- The only real solution to this is to switch to if-bound states for many reasons.
That is a bit more involved changed... -
07:55 PM Bug #2746: IPv6 IPSEC shows down but is actually not...
- Thanks for getting back to me...
You are right, it was a configuration issue but a mean one :-)
If you selec... -
- Widget is working fine, but there is something wrong with fonts and sizes as you can see on attached screenshot.
-
04:17 PM Bug #2633: Captive Portal timeouts cause users to be stuck in limbo
- Hi Ermal,
The fixes broke the captive portal entirely.
For one, DNS requests to the forwarder are completely bloc... -
- Port Forwarding (inbound) has nothing to do with Gateway Groups (outbound).
Please post in the forum for a more th... -
02:44 PM Bug #2777 (Rejected): NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Nat(Port-forwarding) dont work with Multi-Wan, when the First WAN1-Interface has an higher Priotiy(Tier) or no Gatewa...
-
02:49 PM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- Bipin, if you've identified that Unisphere BRAS is used by all the ISPs you've tried and had problems with, then perh...
-
- Applied in changeset commit:e4ffca08822057400f6a8c2af91622e0c32f6140.
-
- After some tests here, i noted the issue persists. When I changed interface from static to pppoe, the static IP remai...
-
- Applied in changeset commit:18f338da58e4f98478bd4710b3f4907759cd9540.
-
- If racoon gives you an IP from the pool, that is fine.
Assigning a specific IP to a specific user is what doesn't ... -
09:09 AM Feature #2776: Unknown Radius-Attributes
- Are you speaking of the radius-attributes like framed-ip-address of cisco?
the ip assignment on racoon is possible a... -
- The lack of IP assignment is a deficiency in racoon. There may not be anything we can do for that.
-
- In VPN ipsec mobile there is the possibility to use the server radius for authentication and accounting
The authent... -
- Okay i will remove it and see what will happens
-
- Can you try removing the trap host/port and see if it stays up longer?
-
- @root 68740 0.0 1.4 8368 6760 ?? Ss 3:27PM 0:00.05 /usr/sbin/bsnmpd -c /var/etc/snmpd.conf -p /var/run/s...
-
- Applied in changeset commit:f657f5e1e407a4687983b6e9907f0dc489945157.
-
- Applied in changeset commit:338c0941ef9a90d33b02627a320fb642d192b172.
-
-
- Merged manually without the GUI option.
-
- Applied in changeset commit:9c115b409d0b21132dae9ad2c62f842a7e438f8f.
-
-
- This is solved now days since filterdns just reloads config and does not need to be restarted on change.
-
- Please open a new ticket about that.
01/23/2013
-
-
- Tested this on a cluster I had handy and servers bound to a CARP VIP run on both. I'm not seeing a problem.
We use... -
- OpenVPN Servers are not bound by the same CARP restrictions as OpenVPN clients. It's normal for OpenVPN servers to be...
-
06:08 PM Bug #2775: OpenVPN Server binds on CARP IP on slave instead on master
- forgotten... the firewall slave binds on the right CARP IP:
wan_vip201: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu... -
- Hello,
I am running
2.1-BETA1 (amd64)
built on Mon Jan 14 11:26:04 EST 2013
FreeBSD 8.3-RELE... -
-
-
- For now let it be without support from pfSense module to have that working.
-
- Applied in changeset commit:5918f9b71295521fb06eac8aec8fabcf876e1831.
-
- Test later snapshots.
-
- Oh that part is not yet functional.
It is on my TODO which can be pushed if someone has the need.
But probably from... -
- Hi Ermal, I can authenticate the client on radius, but I cannot allocate the ip address and I cannot see the accounti...
-
- Can you please be more verbose about what is not working?
-
-
09:45 AM Bug #2759: Lightsquid not working since mod_cgi was removed
- Jim P wrote:
> This should be fixed on current snapshots dated 1/21 or later.
Yes, thank you. It works now. -
- The current DHCP pools code allows creating multiple ranges within the same large subnet. The ISC DHCP Daemon also su...
-
- The new DHCP pools code checks the range given to make sure it is OK for itself (end is after start, etc) but it does...
-
- Please go through the forum first for this.
But the crashdump should be a helpful bit of information.
01/22/2013
-
06:09 PM Bug #2772 (Closed): Kernel panic on WAN wifi + pppoe
- I have an alix (alix3d2, 2xminiPCI, 1xLAN, 2xUSB, bios 0.99h) board
with 2 miniPCI WiFi cards on it (WLM54GP23, Athe... -
02:44 PM Feature #2771 (New): Add packet tracing simulator
- Functionally similar to the Cisco ASA command line:
packet-tracer input <interface> <protocol> <src-ip> <src-port> <... -
12:39 PM Feature #2770 (Rejected): add "device mptable" to amd64 builds to make pfsense boot on soekris6501
- In http://www.mail-archive.com/soekris-tech@lists.soekris.com/msg06840.html a feature request ticket has been asked f...
-
- I just created a pure IPv6 tunnel between two VMs running today's snapshot and it comes up and works and the status s...
-
- When your tunnels are up, can you attach the output of:
setkey -D
and
setkey -DP
That should help us with... -
- IPsec GUI input validation needs some work for IPv6.
If you choose IPv4 or IPv6 on the Phase 1 settings, addresses... -
- After poking some more there just isn't a way to get the info from the management interface that I can see. If you co...
-
- if this is just something that isn't available in OpenVPN 2.3.0, then let's just move the target to 2.2.
-
- This should be OK these days, just make sure:
Phase 1 Settings:
Policy Generation: Unique
Proposal Checking: Str... -
- This should be fixed on current snapshots dated 1/21 or later.
-
- It's currently possible to configure an IP alias or CARP IP on the network or broadcast address of a subnet. For inst...
-
- yeah this really shouldn't have been left here, though it can be applicable in appliance usage scenarios. In general ...
01/21/2013
-
- this doesn't meet requirements for a legit bug report. http://doc.pfsense.org/index.php/Bug_reporting
There's a high... -
01:41 PM Bug #2767 (Rejected): NATting problem in virtualization environment
- I'm sorry I couldn't give better subject, but I experience weird networking problems using pfSense 2.1 beta in a KVM ...
-
- Applied in changeset commit:ca6219025cabd3edbe53e522b345a167381a0171.
-
- There was a very short discussion about the IPv6 privacy extensions in the forum [1], with the key-point being that i...
-
- Applied in changeset commit:20a3b4368660c876c72ef9eefe684269fa356561
-
- Doesn't look like the OpenVPN management interface reports this back in the status line as it does for others, at lea...
-
- status_openvpn.php needs IPv6 support, for instance to show the IPv6 assigned virtual address instead of just the v4 ...
-
- Could you please collect snmpd process information when it starts?
# ps auxwww | grep -i snmp
And send the output. -
- Applied in changeset commit:633c02c1ac86dcd10e52e87e68e5ca757990b6e8.
-
- Applied in changeset commit:633c02c1ac86dcd10e52e87e68e5ca757990b6e8.
-
- Applied in changeset commit:f8dca5a36e63e095f6e0e22e71ec1a1444097814.
-
- Applied in changeset commit:f8dca5a36e63e095f6e0e22e71ec1a1444097814.
-
- Not fixed yet.
-
-
- You cannot select parent queue, it's done automatically and queue will not be created without parent.
01/19/2013
-
- Based on some searching I did earlier, it seems that the only ones suitable are:
sha1 (with the above mentioned re... -
- I'd hate to hardcode a list, but openssl doesn't appear to have a good way to list the available message digest algor...
-
- Just quick update:
1) The relevant keyword in openssl.cnf is default_md = sha256 # (md5/sha512/etc)
2) For openss... -
- Apparently pfsense's Cert Manager has hard-coded the use of SHA-1 for all PKI operations ("digest_alg" => "sha1" in /...
01/18/2013
-
05:13 PM Bug #2764 (Resolved): Captive Portal Voucher Sync issue
- I have found an issue with voucher sync. If you create a new voucher roll on the master pfSense and this new voucher ...
-
- This should be fixed/irrelevant now on 2.0.3 and 2.1. Many related changes in lighttpd and php config were made to fi...
-
07:20 AM Bug #2709: webgui cannot restart if php is hung
- The same is happening with me (2.0.2)...
-
- The Dynamic Firewall Log page doesn't add rows, it only updates the php generated rows which means that if it's loade...
-
- okay it sill stops working so here is my /var/etc/snmpd.conf...
-
- PF has the same problem as is described here for ipfw.
http://lists.freebsd.org/pipermail/freebsd-net/2011-February... -
- the issue is some driver related and Unisphere BRAS which more and more isp r using which uses some flood protection ...
-
- this is a very old issue, a big long thread on this since ages http://forum.pfsense.org/index.php/topic,41061.0.html
01/17/2013
-
- This bug is related to #2719 and has most likely also been resolved.
-
-
- If it doesn't help, please attach the content of /var/etc/snmpd.conf.
-
- i use the latest snapshot.
and yes i know the config is in /var/etc thats why i dont get why i see in system.log "/e... -
- Applied in changeset commit:473129bbc3ddcb6011f2dd9a736addabe1db8acc.
-
- Applied in changeset commit:20f5fce5e45a7356e53e9f206c88b7a7cd69da81.
-
- When the version is different it should work in the same way since it runs an uninstall for old before install the ne...
-
07:30 AM Bug #2547: Pbi manager does not remove old packages after update
- I believe that this was all sorted out some time ago. I just tested with the small package "blinkled"" on nanobsd:
i... -
-
- The process of package update consists on uninstall the old version and install the new one. If PBI was left, it was ...
-
-
- It probably was already fixed on the changes made during all these months. I checked here and couldn't reproduce.
... -
- Applied in changeset commit:2dde998935cd0bfb4c72ca0512366cf248088ba1.
-
- The widget detection function in index.php doesn't filter out invalid files. This means that if you patch a widget fi...
-
-
- if thats the case then it works fine, u can close this bug.
one more thing i noticed not related to this issue but j... -
- there's no way to revert a spoofed MAC short of rebooting (with PPP or anything else), the original MAC is gone once ...
-
- tried, it works well but some issues. after i enter a spoofed mac id, it gets implemented and pppoe reconnects and us...
01/16/2013
-
- Is it still happening on recent snapshots? I couldn't reproduce it, every time I re-plugged the wan cabble, pppoe rec...
-
04:19 PM Bug #2752: Captive Portal Last Activity isn't update anymore --> idle timeout just after login
- Next status update:
I reinstalled version 2.0.2 from scratch because I supposed that the update from 2.0.1 to 2.0.2 ... -
-
- Since "this commit":https://github.com/bsdperimeter/pfsense/commit/f7bddb24d5cb98328fae3f83e1719085e099ea6e, the Ligh...
-
- When interface type is changed, new type is configured correctly but the old type configuration is not cleaned up.
... -
- Applied in changeset commit:84086442a2fa40b0fba12cf00a935144de3c5e71.
-
- Applied in changeset commit:254ebf8b0fb9a8042d154ab2206d7c4f3f16b487.
-
07:36 AM Feature #2757 (Resolved): CDP/ISDP/LLDP support.
- Hello,
i think that will be good to add support for CDP/ISDP/LLDP discovery protocol into pfsense.
FreeBSD alrea... -
- Are you seeing this on recent snapshots?
snmpd.conf is located on /var/etc and not on /etc, do you have any custom... -
- thanks!
01/15/2013
-
- This is completed and working.
The final implementation was to just have the option to specify <internal_name> in ad... -
-
02:46 PM Bug #2726: deletion of DHCPv6 leases from status_dhcpv6_leases.php does not work
- Yep, that appears to have fixed it.
-
- snmd stop working after a while
i restart the service and its working fine
All modules loaded
Modules
SNMP ...
01/14/2013
-
- Applied in changeset commit:c15a87f7a16ced0c73cc709480cbcab651c78603.
-
05:30 PM Bug #2749: gateway groups - when tier 1 gateway fails, routes traffic via gateway set to "never"
- Colin Sinclair wrote:
Also, I tried setting the gateway in my LAN firewall rules to a standalone gateway (i.e. not t... -
- I should have added, all I did was disconnect the OpenVPN client behind the ALIENVPS gateway and then waited for the ...
-
- Here are the relevant parts that changed in each one, thanks!...
-
- Do you still have a copy of your patch? The attached file produces a 404 here.
I recently submitted a pull request... -
- No updates on this? There seems to be little interest in any changes to RADIUS handling, I keep seeing "why do you ne...
-
- yes it worked but as i mentioned in the forum, 2 things need to be done, when u apply the new mac id, the itnerface f...
-
- You will be able to spoof mac. Please let me know the results of your tests, it worked fine for me.
01/13/2013
-
- The way the update system works, I'm not sure there is a lot we can do for this. We can't pre-load the tools package,...
-
02:24 AM Bug #2755: PFSense fail to upgrade if using VMXNet cards under Vmware
- System Configuration:
ESXi 4.1, ESXi 5.0, VMXNET 2 cards with 2.0.1/2.0.2/2.1 tested. -
- Hi!
I am trying to upgrade two router VMs.
start upgrade from website, restarted, after restart I need to re-atta...
01/12/2013
-
09:44 AM Bug #2754 (Duplicate): PPP and 3G: Setting PIN in advanced options not working, stick works after removing SIM PIN
- Recently tried to install a 3G Surfstick on pfSense 2.0.2 x64 stable. Didn't work until I removed the PIN from the SI...
01/11/2013
-
05:45 AM Bug #2753 (Closed): RRD Graphs failes after pfSense upgrade (2.0.1 -> 2.0.2)
- After upgrading from 2.0.1-RELEASE to 2.0.2-RELEASE RRD Graph stopped working with the following error message in the...
-
- Since version 2.0.2 some of our captive portal users are logged out suddenly after login. In radius accounting i saw ...
-
04:48 AM Bug #2751 (Resolved): IPv6 log for ICMP Router Solicitation identified as ICMP packets
- On log page, blocked Router Solicitation are not recognized as ICMPv6 packets.
Protocol is defined as "none". -
- Hello, It's not a hardware issue, I tested on several pc-s Intel and AMD processors, It seems to be a rule issue, Whe...
Also available in: Atom