Activity
From 09/19/2010 to 10/18/2010
10/18/2010
-
10:36 PM pfSense Packages Bug #265: Bugs in Squid LightSquid SquidGuard Packages in PFsense 2.0
- No need to make the CF mounted read/write all the time just to extract the Squidguard blacklists, why not to mount RW...
-
09:16 PM pfSense Packages Bug #265: Bugs in Squid LightSquid SquidGuard Packages in PFsense 2.0
- The only alternative to using /var is to keep the CF mounted read write all the time, which eliminates the purpose of...
-
- To effectively remove packages you have to delete the .xml file(s) in "/usr/local/pkg", this seems to be a problem wi...
-
09:19 PM pfSense Packages Bug #580: dns-server fails to install and remove
- Nevermind. I recreated the whole thing on another instance of PfSense and everything works fine. I think the package ...
-
03:58 PM Bug #882 (Feedback): IP aliases should not sync
- Hi Thiago,
A new fix hax been commited. Can you please try again ?
Thanks again,
Pierre
-
- Thanks for the report. I will doublecheck.
Pierre
-
03:02 PM Bug #882: IP aliases should not sync
- Hi, I've just tested it with the latest snapshot and it seems the problem remains.
Looking at the source, I think ... -
05:55 AM pfSense Packages Bug #868 (Feedback): transparent Squid breaks captive portal
-
- See #670 for more information.
-
- The issue is that you are doing the calculation wrong.
AFAIK dscp values you see on Cisco site you have to add 00 at...
10/17/2010
-
-
-
-
- Problem was due to a javascript issue, only for mobiles. Should be fixed now.
-
-
- You are right. Fix commited in the screen.
-
- That's fine, though it'd be easier and fine to just throw an input validation error if any of the fields contain #
-
- Chris,
The man page of bsnmp deals with '#' in config file:... -
09:07 PM Bug #956: # cannot be used in SNMP configuration
- Just figured it out. Don't use "#" characters in any of the fields...
(I had the address set to "#200-135 Innovat... -
- Hi Adam,
I just upgraded to the latest snapshot and I cannot reproduce the problem.
Can you give me the "snmpd"...
10/16/2010
-
01:16 PM Bug #906: Orphaned rules from deleted interfaces are still present in config
- You are right the interface deletion code does get rid of the rules, but if someone deleted the interface before that...
-
- This is how the interface deletion code works!
What are the details to reproduce the problems? -
- Applied in changeset commit:"659963994dce689bdaaa5cdd83bc77008737d92a".
-
- Thank you committed.
10/15/2010
-
- Hi, I'm running the latest (as of Oct 15th) and I just installed dns-server and a few minutes later decided to remove...
-
07:11 PM Bug #957 (Resolved): Dynamic DNS Fails with a disabled entry.
- Line 593 in /etc/inc/services.inc should be return, not continue.
This can cause the following error on a page whi... -
- Actual problem is a # character can't be used in any of the SNMP configuration fields. Original post follows.
R... -
- Try with latest changes.
-
-
- Applied in changeset commit:"f1aad4d1ad04214382ba577360732ae581c51264".
-
- You can create the same user locally and assign it to groups that should work iirc.
Never tested though.
10/14/2010
-
11:25 PM Bug #714: Cellular RRD Graph Shows w/o 3G Modem Installed
- Just FYI, still present as mentioned in the update (Cellular still appears when at the Settings tab) on:
2.0-BETA4... -
- Setting back to New since it hasn't been fixed.
-
-
- Should be fixed in later versions.
-
- If you have a 1.2.3 install with WAN configured with a static IP, the gateway does not upgrade to 2.0.
This used t... -
- Is this happening with latest version?
-
- This should be ok in latest versions. AFAIR you cannot rename gateways anymore.
-
01:09 AM Feature #953 (Feedback): On outbound NAT rule edit, hide ports when protocol does not use ports.
10/13/2010
-
- Applied in changeset commit:"f91060852cd28d14fa2cfa100c358e3c4a7fab2c".
-
- If "Do not NAT" is checked on an outbound NAT rule, it uses the "no nat" statement in the ruleset, which does not use...
-
- When switching to manual outbound NAT when the PPTP server is enabled, it does not pick up any kind of IP address fro...
-
- In other rule types, the fields for ports are hidden when selecting a protocol that does not use them. The edit page...
-
05:00 PM Feature #951 (Resolved): CARP doesn't sync Layer 7 rule groups
- In pfsense 2.0 (Tue Oct 12 23:05:03 EDT 2010) CARP doesn't sync Layer 7 rule groups.
-
- Can you please try with latest version!
-
04:11 AM Bug #757: PPPoE Disconnect button with multiple PPPoE interfaces
- i have the same problem, with period pppoe reset enabled also, once the connection is brought down, it never gets up,...
-
-
11:29 AM Bug #948: Can't assign VLANs to LAGG interface via web interface
- I was fiddling the settings before trying reinstall and renamed some vlans to remove couple of umlaut characters. Sud...
-
- I upgraded to the latest snapshot (2.0-BETA4 (amd64) built on Wed Oct 13 05:08:20 UTC 2010) and the problem still pe...
-
- I just setup VLANs on lagg with igb NICs yesterday, on yesterday's snapshot (same one in the original post), with 0 i...
-
- Here is ifconfig output for the relevant parts. VLAN_MTU is present on the member interfaces (which do show up on the...
-
- When a package cannot be installed, such as missing binaries or binaries that cannot be fetched for any reason, the p...
-
- Applied in changeset commit:"94823361c3216555761ff57463fe91b2a229a090".
10/12/2010
-
08:16 PM Bug #757: PPPoE Disconnect button with multiple PPPoE interfaces
- Hello again,
I heard from gnhb in the forums who indicated this was/is due to my PPPoE interfaces having the "Dial... -
- This should be solved by the apinger process restarting.
Please test newer snaps. -
-
- Applied in changeset commit:"df2a0f1861be7a4b751bc4cb6e5fe7025b8f0f9c".
-
- Applied in changeset commit:"3c69217457175c82b73922fca2ce578c3dbfc221".
-
- interfaces available after added to a lagg interface. for example:
I created lagg interface with em2 and em3 interfa... -
- Can you show an ifconfig of lagg members and lagg itself when this happens?
Probably one of the members of lagg is n... -
- LAGG interface is missing from VLAN capable interfaces list when creating or editing VLANs, but existing VLANs using ...
-
- Yeah that's good but the forum sees more traffic, and the 2.0 board is very active. There are probably quite a few pe...
-
02:05 PM Bug #943: 2.0-BETA4 Dynamic DNS updates not working
- Will look at opening a forum account and doing so. Already discussed on the support@ ML and Chris suggested opening ...
-
- I'll set this back to new for now. You might want to start a forum post on the 2.0 board to see if anyone else has si...
-
- Switched to DynDNS (Dynamic) and unset the wildcard. Tested with the three combinations (dynamic/wild, static/nowild...
-
- That is possible, I am on a full install. First, can you try setting for DynDNS (Dynamic) and unchecking Wildcard jus...
-
- Perhaps the difference is the platform. Mine's running the embedded NanoBSD build and I get no such 'DynDns: xxx' me...
-
- And I do the same thing on mine and it works:...
-
- Already implemented in 2.0.
Firewall > Virtual IPs, the type of "IP Alias" is where this is done. -
12:13 PM Feature #949 (Rejected): Multiple IP Addresses on one interface
- Hello,
I read that you wanted to implement a feature throw which there can be assigned multiple IP's on one inter... -
- Applied in changeset commit:"ddac713985dc06d55d5b4222147792d4775bf894".
-
- Eventually it would be nice to allow using aliases on the IPsec phase 2 definition screen for local and remote networ...
10/11/2010
-
11:54 PM pfSense Packages Bug #945 (Resolved): vhosts package in pfsense 2.0
- The vhosts package has portions for FreeBSD 7.2 (pfsense 1.x) and FreeBSD 8.0 (earlier 2.x builds).
The current Free... -
- When moving a VLAN from a physical interface to lagg (amongst other possible scenarios), you end up with duplicate VL...
-
- Nope. Just updated to "Sun Oct 10 23:06:39 EDT 2010" and the same test produces the same behavior: DynDNS.org still ...
-
- Please update to a much more recent (10/10 newer) snapshot and try again, then update the ticket. Many changes happen...
-
- Running 2.0-BETA4 (i386) NanoBSD 1G image dated "Mon Sep 20 22:40:28 EDT 2010". WAN is a DSL PPPoE link in bridged (...
-
12:07 PM Bug #942 (Resolved): dhcp relay breaks
- with pfsense 2.0 beta4 Oct. 10th snapshot installed, the dhcrelay service can't start.
Find following errors in sy... -
05:00 AM pfSense Packages Bug #868: transparent Squid breaks captive portal
- With adding :header("Connection: close"), Portal Captive work fine even squid is installed.
Thanks
10/10/2010
-
- Hi there,
The disconnect button is broken again. Slightly different behaviour this time.
Status->Interfaces
... -
- Fixed file attached.
-
- The vhosts package generates a config file for lighttpd.
The config file incorrectly loads mod_accesslog twice.
E...
10/09/2010
-
-
- how do u do it without creating traffic shaping queues?
10/08/2010
-
07:07 PM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- I tested it on 2 firewalls and everything seems to be ok. This issue actualy included few other connected issues. My ...
-
- can already do in 2.0
-
- consider this a feature request as usually what happens, when the internet speed is low such as mine 1mbps, i need to...
-
- count my vote for this as this is what i have been wanting from a quiet some time and dont find it too tough to imple...
-
10:27 AM Feature #939 (Closed): Ability to restore specific areas of configuration backup from full config backup
- It would be great if particular areas of a configuration backup could be restored without manually editing the .xml f...
-
- to restore IPsec-only you must only have <ipsec> to </ipsec> in the config. Not a bug, that's just how it works.
-
- Have current running pfSense 1.2.3 system and created a backup which includes all areas of the configuration. Perform...
-
10:03 AM pfSense Packages Bug #868: transparent Squid breaks captive portal
- add *header("Connection: close");* in /usr/local/captiveportal/index.php will fix the issue
header("Expires: 0");
...
10/07/2010
-
-
- Thank you Pierre, I tried with the current snapshot and the issue is fixed.
Best regards,
Thiago -
02:44 PM Todo #881: Passive FTP over pfsense
- This problem went away within the last 2 days.
-
12:27 AM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- Ivan, can you test a current snapshot (without your modified status_gateway_groups.php) for this problem again? There...
10/06/2010
-
-
01:39 PM Bug #930: attempt to create routing group - does not create it
- I have downloaded Today's Snapshot, and it appears to create the group.
This appears to be fixed.
Thank you! -
- I tested this issue and it works for me on a recent snapshot. I get a group showing up in the list.
If you haven't... -
02:48 AM Bug #930: attempt to create routing group - does not create it
- I would suggest this is related to:
http://redmine.pfsense.org/issues/919
Please confirm so this can be closed.... -
- Done. :-)
-
03:24 PM pfSense Packages Bug #937: OpenVPN client export utility does not capture IP address of server
- Different browser, the problem goes away. Aaaagh, browser issue.
Sorry for the noise. Please close this ticket, ... -
- It must be something in your OpenVPN instance's config. The code in question looks like this:...
-
- Interesting note here:
If I run the extract from the backup firewall, I get the correct IP in the installer. It's... -
- Was not aware of 7-zip, thanks.
I've downloaded a fresh Windows Installer and looked into it with 7-zip. The conf... -
- I downloaded and extracted a windows installer bundle and it, too, included the CARP VIP as the remote entry.
Perh... -
- And I forgot to answer your direct question:
2.0-BETA4 (amd64)
built on Sun Oct 3 18:27:52 UTC 2010
FreeBSD 8.1-... -
- Jim,
You are correct. The VIP is there. I created the VPN before I created any CARP interfaces, so I didn't see ... -
- Can you confirm what snapshot you are running?
I just tried this on a VM on the latest image: I made a CARP VIP, ... -
- Running 3 October amd64 2.0 snapshot on ESXi. Using OpenVPN with the client export utility.
In the "advanced" Ope... -
- Yes, exactly, that is empty when you click that button.
Last 50 PPTP VPN log entries
Time Action User IP addres...
10/05/2010
-
- Hi Thiago,
This problem should be fixed now on the next snapshot !
Regards,
Pierre -
- When setting up a new Phase 2 IPSEC connection in the GUI, if 'Local Network' is set to 'Address', then an invalid ra...
-
04:35 PM Bug #929: Remote syslog not working
- Looks like it is fixed. Thanks :)
-
- Applied in changeset commit:"4178a1ddf67da87a1a86c5df9c3367aea6d3ae07".
-
- Committed, thanks!
10/04/2010
-
10:47 PM Feature #933: Add IPsec option to allow the client to save the Xauth password
- Patch attached.
-
- Add check box in the 'Client Configuration (mode-cfg)' section of IPsec configuration pages that would allow pfSense ...
-
- pfsense 2.0 has the new radius authentication method, but the code has no way to assign privileges to the radius user...
-
- to be clear this is from:
system_usermanager_settings.php with radius server configured -
- This page only supports LDAP currently.
-
- Not a big deal.
-
- I added an FAQ to cover this since it affects older versions as well:
http://doc.pfsense.org/index.php/Router_is_Mis... -
- pf(4) policy routing(route-to/reply-to) does not decrease the ip TTL when forwarding packets.
This makes pfSense inv... -
- This should be fixed in snapshots after Oct 3.
-
-
10/03/2010
-
10:55 PM Bug #834: DHCP server options for TFTP server doesn't allow arbitrary strings
- I just updated to a nightly and tested this and it appears to work fine now.
-
- The DHCP lease backup causes errors when the DHCP server isn't enabled. ...
10/02/2010
-
- Thanks. the other issue you noted on some password fields is a general one (related to css IIRC), there is another t...
-
09:42 AM Bug #849: diag_authentication.php Results Formatting
- _checked on 2.0-BETA4 (amd64) Sat Oct 2 08:52:40 UTC 2010:_
Looks better now.
Just a minor cosmetic issue:
In th... -
-
- _checked on 2.0-BETA4 (amd64) Sat Oct 2 08:52:40 UTC 2010:_...
-
- Thanks
-
- _checked on 2.0-BETA4 (amd64) Sat Oct 2 08:52:40 UTC 2010:_
Added testing route /16, changed to /24, and changed aga... -
-
- _checked on 2.0-BETA4 (amd64) Sat Oct 2 08:52:40 UTC 2010:_
* created interface group "testgroup" (with just one int... -
- _checked on 2.0-BETA4 (amd64) Sat Oct 2 08:52:40 UTC 2010:_
WebGUI permits to enter under "Additional BOOTP/DHCP opt...
10/01/2010
-
-
- Tested on Snapshot built on Fri Oct 1 07:58:19 UTC 2010:
Chaging the WebGUI port is effective immediately.
-
-
- Confirm certs are now created with the correct key length as chosen in the gui.
Tested on Snapshot from Fri Oct 1 07... -
- System: Gateway Groups
When attempting to create a rout group (System -> Routes -> Groups), upon completion, the s... -
- Ok, thanks for this last report.
I just commited a fix, issue should be fixed now, it is working on my box.
Ch... -
- The fullname field in the user manager is also another source of this issue. It will either need to be CDATA escaped ...
09/30/2010
-
- problem seems to be when only ticking the checkbox for "Everything"
if i check all the checkboxes I get:... -
- ...
-
- Can you also send me your syslog.conf ?
Thanks,
Pierre
-
- they are all clustered though, Chris are your pfsense's clustered as well?
-
- Have unchecked and rechecked enable remote syslog multiple times, have removed the syslog server and put in a differe...
-
- Mine is :...
-
- <syslog>
<reverse/>
<nentries>100</nentries>
<logall/>
... -
- Mine looks like this. ...
-
- I also confirm this is working in recent snapshots.
Can you give the syslog part of your /cf/conf/config.xml file ... -
- I'm using the version 2.0-Beta4 Wed. sep 29 12:15:10 EDT 2010
The logging on remote server work fine.
May be yo... -
- I was previously running the Aug 28 build, and it existed there. Updated to latest build today and still there.
-
09/29/2010
-
- this regressed somewhat recently
-
- I have configured syslog to send to a remote host but it is not sending any traffic. Doing a tcpdump shows no syslo...
-
- Reported here:
http://forum.pfsense.org/index.php/topic,28501.msg148698.html#msg148698
I can confirm I've seen sa... -
- My 3G modem (USB Mercury connect) gets locked up when function interface_configure is called and the modem is already...
-
09/27/2010
-
- I too see this issue. No passive FTP out from the LAN->WAN works. I just updated to Mon Sep 27 04:12:19 EDT 2010 fro...
-
04:11 AM Bug #922: Traffic Shaper
- The problem persist on filter reload
after an upgrade to latest snapshot i have this problem:
Acknowledge All ... -
- duplicate of #844 (it's the same, it's broken, we're aware)
-
02:51 AM pfSense Packages Bug #925 (Rejected): Open VM Tools install
- - responds to Bug #844 but its not the same
- there was 2.0 BETA Snapshots with the possibility to install open vm t...
09/26/2010
-
06:49 PM
Bug #495: USB drive fails to mount during boot
- Had same problem mounting root from USB DVD drive with pfSense-2.0-BETA4-20100925-1629. Worked fine with pfSense 1.2....
-
- The line to prevent synchronization (as for "proxyarp") was missing, probably because "ipalias" VIP type was added in...
09/25/2010
-
- we're not investigating any shaper issues on 1.2.x as it's completely rewritten in 2.0. If you have issues on 2.0, pl...
-
- Hi, after an ugrade to version: 2.0-BETA4 (i386)
built on Fri Sep 24 14:30:24 EDT 2010
there are many problem o...
09/24/2010
-
-
11:10 PM Bug #903: Login problem
- Ok. It appears to be a USB problem, I moved pfSense to the hard disk, no problem for the time being
-
11:07 AM Bug #729: if_bridge unpredictable filter interface selection
- Seeing something different, but similar with a bridge configuration. It appears now that the arp cache is leaking int...
-
10:08 AM Bug #923 (Closed): Incoming traffic marked with diffserv goes to wrong queue
- I have one installation of pfsense 1.2.2 and one of pfsense 1.2.3 with a similar configuration:
- same voip provid... -
- This is still a problem for sysctl tunables. For some reason their description field is desc and not descr, so they a...
-
- hi, 2.0-BETA4 (i386)
built on Thu Sep 23 14:10:46 EDT 2010
FreeBSD 8.1-RELEASE-p1
with traffic shaper enable w... -
- Same code is causing this problem as #919.
-
- I'm working on this issue.
-
- I'm not quite sure what you mean for that second part. The option for the logout popup is unchecked by default.
-
- This was related to #836, so it should also be fixed.
-
- Applied in changeset commit:"6991e1a60d4475d84660376f26f07735f8cbf67f".
09/23/2010
-
10:59 PM Bug #921 (Resolved): Gateway monitoring stops after interface goes down
- 2.0-BETA4 Wed Sep 8 05:47:43 UTC 201
Further background info in Bug #920
1) Set WAN monitor IP to 4.2.2.2
2) P... -
- When using a PPPoE connection with dynamic IP address and dynamic gateway which both change each time a session is es...
-
- The monitor IP should never be associated with an interface, sounds like there are still bits of that issue around (i...
-
- This is still partially broken. After my commit, it saves properly, but you can't unset(delete) the monitor ip becaus...
-
- Applied in changeset commit:"58611e3a1da07a33c6cf65401ad3edf278190e75".
-
- I just tested saving a monitor ip on the OPT3 interface on the monitorip field did end up in the [interfaces][opt] se...
-
- 2.0 BETA4, built Sept22, on an ALIX board with a 3G PPP WAN connection defined.
1. I've been reading of the code t... -
- Applied in changeset commit:"838e27bf24f54735795387800ce2d43662f3cc81".
-
- Looks like the key length wasn't also being passed to openssl_pkey_new. I'll be committing a fix shortly.
-
- This can also be verified by using standard OpenSSL commands:...
-
- Another report here:
http://forum.pfsense.org/index.php/topic,28557.0.html
09/22/2010
-
- When setting a redirection URL in CP, it doesn't do anything. After logging in, it just returns to the login page aga...
-
-
- Applied in changeset commit:"a147b1e0432e2fa7ba831668d4f0ff95351179b8".
-
- This should be fixed.
It was a forgotten switch to new check_reload_status world order.
Test newer snapshots. -
- When you change the WebGUI port, the setting does save properly but lighttpd's config is not rewritten. If you then c...
-
- Should be fixed with this commit: https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/7b2fdac49b28d638a38...
09/21/2010
-
- That is correct. This is not documented: http://69.64.6.24/index.php/NTP_Server_(OpenNTPD)
How can I get access to... -
- It works fine. It will not provide responses immediately, you have to wait an hour or two after it launches until it'...
-
- The OpenNTPd server does not operate. There is no option to install further NTP services in System > Packages. There ...
-
- Also, as a note to myself: It still needs upgrade code to handle existing CRLs
-
- It's still a work in progress, but at the moment you can at least import an external CRL and assign it to an openvpn ...
-
- Hi, I installed the 2.0-BETA4 (i386) built on Mon Sep 20 22:40:28 EDT 2010
the captive portal works correctly no... -
- Can you try the latest snapshot to see if this is working now?
It looks like the missing modules that were causing... -
-
- This is a duplicate of bug #916
-
-
- First, you're referring to PPTP server right?
I'm pretty sure they're supposed to be under the "VPN" tab of the Syst... -
- The PPP log migration I believe targeted the PPTP logs as well. Regressions:
1) It's not logging PPTP at all that... -
- Duplicate of #908 (It's a builder modules issue)
-
- Captive portal in 2.0-BETA4 (i386)
built on Mon Sep 20 05:47:53 EDT 2010
FreeBSD 8.1-RELEASE
does not work. the... -
- You can just rm beep.sh, and if you add that to an <earlyshellcmd> tag so it's done on every boot, upgrades won't mat...
-
03:39 AM Feature #913 (Resolved): Add option to disable/enable beep sounds permanently via pfsense GUI
- Hi all,
I used m0n0wall for years, great piece of software. Smooth and SILENT! But now I changed to pfsense using so...
09/20/2010
-
- The addition to kill states when a WAN goes down is going to create fallout in scenarios where it needn't. Especially...
-
- As reported by a user here http://forum.pfsense.org/index.php/topic,28442.0.html (And experienced by myself last week...
-
- Captive portal don't work correctly. as if it were not enabled.
-
- this is modified version of status_gateway_groups.php to show correct status of groups.
Ermal, please check and incl...
09/19/2010
-
- As reported here:
http://forum.pfsense.org/index.php/topic,28233.0.html
Toggling the checkbox for Prefer older IP... -
- When you delete a normal interface, the rules are left orphaned in config.xml without an interface tag so there is no...
-
- Submitted to me via e-mail from "warhol" when the DB was having issues:
Problem: Cert Manager only produces 1024bi... -
- I recreated gateway groups and can confirm that there is still issue with status of gateways in group. Status of each...
-
- As of 18.09 snapshot I can confirm that this issue is resolved. Dynamic gateways are ok on upgrade / reboot / reconnect
-
- Fixed now.
Also available in: Atom