Activity
From 03/24/2013 to 04/22/2013
04/22/2013
-
11:50 AM Feature #2963 (New): Captive Portal MAC authentication request
- It would be excellent if the captive portal sent authentication request by mac on activity for any protocol, not just...
-
- Sorry, i'm know that is not a bug, was a mistake when i put the request.
-
10:51 AM Bug #2961 (Rejected): Captive Portal MAC authentication request
- not a bug
-
- It would be excellent if the captive portal sent authentication request by mac on activity for any protocol, not just...
-
09:32 AM Bug #2962 (Resolved): IP Aliases cannot be used for routes/gateways
- Version: 2.0.3-PRERELEASE, 2.1-BETA1 (Apr 18 2013).
Short: The system will not allow a gateway to be created where...
04/21/2013
-
02:59 PM Feature #1825: Dynamic DNS client IPv6 support
- Can you point me to where in the repository the code for this lives?
-
11:06 AM
Bug #2728: PPP WAN types do not obtain DNS servers properly in 2.0.2-RELEASE
- Fixed in 2.0.3-RELEASE. Ticket can be close.
04/20/2013
-
10:08 AM Feature #2960 (Closed): Add queue length adjustment capabilities to traffic shaper based on network size
- On larger networks, queue limits appear to perform better and drop less when increased in proportion to the size of t...
-
- [[http://forum.pfsense.org/index.php/topic,60798.0.html]]
When using the wizard to create a penalty net, the rule ... -
12:38 AM Bug #2958: Load Balancer: relayd must be manually restarted when added second virtual server
- Also DNSMasq being bound to *:53 by default prevents relayd from binding to port 53 for inbound DNS load balancing. I...
-
- I have 2 CARP WAN IPs setup for use with my 2 DNS servers. I configured the Pool for loadbalance and added the 2 LAN ...
-
12:37 AM Feature #2859: Allow to configure different mac addresses for multiple VLANs on same physical interface
- and total cost of solution would be because when i tried promiscuous mode, my download got faster bu upload was still...
04/19/2013
-
- looks like a potential CP issue so updating accordingly.
-
- I have encountered the following problem: the captive portal always sends the same number of bytes in each session wh...
-
01:44 PM Bug #2915 (Feedback): OpenVPN server/client not started after WAN physical hotplug event
-
- I do have a domain with them, and I'll be happy to help test, but I'm probably not in a position to actually help cod...
-
12:55 PM Feature #1825: Dynamic DNS client IPv6 support
- Not so easy to test that one as it requires directing DNS for an entire domain at HE.net, it isn't really a DynDNS se...
-
- What about dns.he.net? From the example on their website:...
-
- It would, but how would we test it? I still am not aware of any DynDNS providers doing IPv6 updates.
-
- Would it be possible to at least add support for an %IPv6% token to the update URL field for the "custom" service typ...
-
- In the attached xml, shaper section is empty, and there is the place where queues are defined. Could you please doubl...
-
- Bipin Chandra wrote:
> practically is this even possible?
>
> feature request would push it forward for a few mon...
04/18/2013
-
- Applied in changeset commit:ecf8dba773705303bba39feed529d2b8f7f0577f.
-
- Applied in changeset commit:d97eccf9fdee3c753f6ae5ed222dba7ae3448a21.
-
12:06 PM Bug #2956 (Resolved): lookup_gateway_ip_by_name() (in gwlb.inc) might return the wrong IP if the gateway has an entirely numeric name
- I have two gateways, named "1812" and "1812v6", with "1812" being first in the list. When this function is called ask...
-
07:21 AM Feature #2955 (Rejected): show interface in firewall_virtual_ip.php template
- All kinds of virtual ips needs an interface.
Interface is a critical data. an Interface column should be shown in th... -
02:40 AM Todo #2953: Track down root cause for necessary rc.firmware adjustments for USB flash media
- Raw command on console - /sbin/fdisk da0 | /usr/bin/grep Meg | /usr/bin/awk '{ print $5 }' | /usr/bin/cut -d"(" -f2 -...
-
- there could be 2 ways to do this
register multiple mac ids using network drivers
or
bridge the interface and the...
04/17/2013
-
10:22 PM Bug #2954 (Closed): Increase FIRMWARE_MAX to 50 for bwn and bwi wifi firmware
- In order to support bwi and bwn wifi cards a patch from upstream FreeBSD. This apparently has been an issue since 201...
-
- *My commit:*
Previous USB patch to add 4MB to partition size calculation was not only not working, but worse, caus... -
- practically is this even possible?
feature request would push it forward for a few months to over an year now, pro... -
- Moving it to a feature request and set more appropriate Subject
-
- but based on this thread, there r a few ppl using it but with promiscuous mode on and i did the same and isp authoriz...
-
- All VLANs will have the same mac address set, you cannot have 2 VLANs (on the same physical interface) with different...
-
- and also sometime back i saw some patches which make all vlans use the parent nic mac id only so if the parent nic ma...
-
- first i create new vlans, like 10.20 etc for the parent single mac id, then assign wan interface to one of them like ...
-
- Did you spoof different mac addresses on VLANs? Is it possible to share <interfaces> section of config.xml?
-
-
09:29 AM Bug #2878: radvd does not restart properly
- I am also running into the issue still on the latest April 16th snapshot. Radvd is running when the firewall starts u...
04/16/2013
-
11:14 PM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- I saw this issue with the April 12th snapshot. As an additional data point, I'm attaching a rsyslog snip from the ren...
-
- Seeing the same issue with recent snapshots (second week of April) on my Comcast home connection.
-
- Actually, I think what I'm seeing may be a separate issue: In my case, radvd fails to start after a reboot (or possib...
-
- I'm still seeing this issue on the Apr 16 snapshot.
-
05:59 PM Bug #2952 (Resolved): Unvalidated input during system_firmware_check.php
- When the system goes to check firmware, it checks over http:, not https, secondly it blindly accepts any returned res...
-
10:18 AM pfSense Packages Bug #1620: Can't use transparent proxy when using bridge.
- Version 2.0.3 the issue are not solved yet, obviously, there is not the intention to solve this bug !
-
09:13 AM Feature #2123 (Feedback): Backup RRD files using the xml dump and restore from RRD tools
- I've committed a new RRD upgrade scheme, please test.
https://redmine.pfsense.org/projects/pfsense/repository/revisi... -
- I've committed a different RRD upgrade scheme, please test. WorksForMe(tm)
https://redmine.pfsense.org/projects/pfse... -
07:34 AM Bug #2951 (Resolved): OpenVPN and alternative monitoring IP in 2.1
- Regarding Revision 4fdd86a3 fix (https://redmine.pfsense.org/projects/pfsense/repository/revisions/4fdd86a37e8ef82298...
-
- Chris Buechler wrote:
> Still not started on hot plug whether using a gateway group or not.
Could you try it with...
04/15/2013
-
- Applied in changeset commit:25c3f30c612dba4c7ee6c15eed3f9feee28d5603.
-
- Just create a new static route, using an alias on Destination Network and try to delete it afterwards, nothing will h...
-
- I performed some upgrade testing related to ticket #2935 and #2123
It turns out that the current upgrade code when... -
07:56 AM Bug #2949 (Closed): dhcp on embedded doesn't provide router in lease information
- Early Saturday morning I updated 2 pfsense devices to the latest snapshot (2.1-BETA1 built on Fri Apr 12 16:46:36 EDT...
-
- I just add a note saying it will persist even if DHCP server is disabled, this will help users to understand how it w...
-
- isn't that correct though? Using static ARP on an interface isn't dependent on DHCP being enabled if it uses the rese...
-
- When you configure a DHCP server for an interface and set 'Enable Static ARP entries' option, interface is being set ...
-
-
06:50 AM Bug #2939: Static ARP entries removed after link loss on LAN
- Tested and its working perfect, Thank you so much!
-
- the issue in this ticket is resolved. check_reload_status having high CPU usage in current snapshots is a symptom of ...
-
03:35 AM Bug #2555: check_reload_status consumes 100% CPU usage
- This still happens to me on
2.1-BETA1 (amd64)
built on Sun Apr 14 16:35:09 EDT 2013
FreeBSD 8.3-RELEASE-p7
Int... -
- The issue still happens to me on:
2.1-BETA1 (amd64)
built on Fri Apr 12 16:46:36 EDT 2013
FreeBSD 8.3-RELEASE-p7
...
04/14/2013
-
- Applied in changeset commit:5b431a20dead1128687453407a3b0c603154e773.
-
- on system_routing_edit.php, this only works if the first item in the alias list is a hostname. It works correctly on ...
-
- bsnmp-ucd is already on 2.1 and has been for several months.
-
01:56 AM Feature #2946 (Rejected): Extended SNMP monitoring using bsnmp-ucd
- Hello,
is it possible to add bsnmp-ucd to 2.1 version?
currently i install it manually on all my firewalls (vers... -
09:09 AM Bug #2841: input validation on IPv6 static routes needs to take link-local into consideration
- Please see update on forum, which includes a patch that was created using the April 1 snapshot:
http://forum.pfsen... -
-
-
- Still not started on hot plug whether using a gateway group or not.
-
-
04/13/2013
-
03:34 AM Bug #2803: igmp version reset
- Run into same issue and found some kind of more detailed description.
Reason seems to be that freebsd is very strict...
04/12/2013
-
03:06 PM Bug #2915 (Feedback): OpenVPN server/client not started after WAN physical hotplug event
- Several fixes committed related to this.
-
- Checked on 20130409 snapshot and it's fixed.
-
- Zeev Zalessky wrote:
> is it possible to backport it to 2.0.2? i'm work now on build environment for 2.0.2.
No, i... -
07:47 AM Bug #2945: Installation stucks at 36%: /usr/local/bin/cpdup -vvv -I -o /usr /mnt/usr
- hm.... thanks for the hint!
-
- you can install to the drive in another system and move it over
-
- ok. i tried memstick and serial memstick.
serial memstick won't boot at all (
ok. i understand, ill try with a... -
- that's always happened in very rare circumstances. Try the memstick instead. We're not fixing non-regressions in the ...
-
- I've tried several last (5 days old was max) snapshots which were downloaded from: http://snapshots.pfsense.org/FreeB...
-
04/11/2013
-
07:42 PM pfSense Packages Bug #2944 (Resolved): dansguarian squid proxyport default set to 127.0.0.1
- I'm running: pfSense 2.0.2-RELEASE (i386)
If you state the 3128 port is default you should set to 3128 in the con... -
- I've looked over the code and the RRD restore does take into account both file formats of pre 2.1 config files. Debug...
-
- I just pushed another 5+ MB config (from 2.1) with 6 interfaces and assorted RRD files into a current 2.1 install and...
-
- I've created a 128MB ram VM and restored my working soekris config onto it, it succeeded. Granted this was a full ins...
-
11:46 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- Dears,
I have the same problem with one of my firewall in china, I'm connected to a huawei SmartAX MA5620-8 -> there... -
- Applied in changeset commit:c1d8c235c4135dc4e5cdd1fe024066364eed4392.
-
- Yes, this is what I got:
Apr 11 15:09:49 pfsense php: : HOTPLUG: Configuring interface lan -
- Are there messages containing the strings 'hotplug' (ignorecase) at /var/log/system.log after switch is turned back on?
-
- is it possible to backport it to 2.0.2? i'm work now on build environment for 2.0.2.
-
- Zeev Zalessky wrote:
> is it mean that 2.0.2 built with latest freebsd 8.1 will include ixgbe 2.5.0 driver and 2.1 w... -
02:56 AM Feature #2931: Import latest ixgbe drivers from FreeBSD 8-STABLE
- Brenton Denman-Murray wrote:
> Secondly:
> Will this be available in the next nightly snapshot, or will there be a ... -
12:58 AM Bug #2943 (Closed): Problem with Interim-Update in PfSense Captive portal
- Hi,
I am using latest Snapshot of Pfsense 2.1 and also installed FreeRadius2 Package in pfsense cp and confiured w...
04/10/2013
-
06:09 PM Feature #2931: Import latest ixgbe drivers from FreeBSD 8-STABLE
- Firstly:
Thank you very much Renato and the pfSense team.
Secondly:
Will this be available in the next nightly s... -
- Applied in changeset pfsense-tools:commit:d7237df820fde9fa7327960c9fdd191325494029.
-
09:07 AM Todo #2942: PHP-Growl: Growl Talk Notifications UDP 9887 implementation deprecated. GNTP is the new standard notification protocol.
- Warren Baker wrote:
> http://growl.laurent-laville.org/ should work no?
Good find Warren! Hadn't seen that one. T... -
- http://growl.laurent-laville.org/ should work no?
-
- Growl no longer uses UDP 9887 to send notifications as of 1.2.1 (as far as I can tell). Free versions 1.2.2-1.3 and p...
-
- Applied in changeset commit:8543a5bbe2037c9214f967806f417c7c4ba3b062.
-
- Seth, can you get this done within at most a week, or else explain enough to Renato so he can pick up on it? We're go...
04/09/2013
-
- aliases containing FQDNs cannot be used in static routes, need input validation to prevent that config from being used.
-
-
- meant to say they fail to gain access after the switch is turned back on.
-
- - it happens every time The switch connected to the LAN interface gets disconnected, ARP entries disappear and all LA...
-
- I couldn't reproduce it on my test environment.
- Does it happen every time LAN link is lost?
- Is there any usef...
04/08/2013
-
- is it mean that 2.0.2 built with latest freebsd 8.1 will include ixgbe 2.5.0 driver and 2.1 will has it also?
-
- Duplicate of #2931
-
- Hello,
is it possible to add latest ixgbe drivers to pfsense 2.1? drivers from freebsd are too old and too buggy -
- Applied in changeset commit:58f2f42a48247487fd2ee650c5ae137bbb77f4e0.
-
- /status.php includes the output from "ipfw show" which now does not work since the context parameter is mandatory. It...
-
- Assign it to you Seth, since you mentioned at #2123 you want to take a look. If you figure out there is no way to fix...
-
- Can we atleast have a look if we can optimize the way we handle those large memory arrays during restore? I'm doing t...
-
- The changes for ticket #2123 work, but in the version of rrdtool we're stuck on for the time being, it consumes far t...
-
- Hello, Static ARP entries disappear whenever a link loss happens on LAN, exact same issue I faced on 2.0 beta as expl...
-
- As I mentioned, there are other ways that it could happen that are also misconfigurations. We need to see the full co...
-
10:09 AM pfSense Packages Bug #2936: dhcrelay does not start
- How can i even select lo0, loopback interface is not available for dhcrelay !!!!
-
- Not enough information here. Please start a thread on the forum to discuss it, but it's most likely a configuration e...
-
- With pfsense 2.1-BETA1, dhcrelay fails to start with error :
/services_dhcp_relay.php: The command '/usr/local/sbi... -
- Not enough information here for a legitimate bug report. Please discuss it on the forum first and if an actual bug is...
-
- Hi,
I'tried pfsense 2.1-BE5A1 (built on Wed Mar 27 07:33:29 EDT 2013 ) as router/firewall (ospf is used for wan) a... -
- This can be made to work, the issue here is that the memory violation is thrown in PHP, not in the rrd_restore binary...
-
- for 2.1 this will be reverted as #2935. This needs revisiting when we're on a new rrdtool.
-
- Tom, can you please test a new snapshot and confirm this fix? I can't replicate.
-
-
-
- After Phil's last submission everything here looks good. thanks!
-
-
-
-
-
-
-
04/06/2013
-
01:03 PM Bug #2933 (Resolved): miniupnpd ext_ifname setting is not updated after changing WAN interface type from DHCP to PPPoE
- If the WAN interface type is set to DHCP or Static, then miniupnpd's ext_ifname setting is set to the name of the phy...
04/05/2013
-
-
01:50 PM Bug #2883: pf rules contain erroneous "!/" artifact leading to "syntax error" in log
- It is fixed. At least for me. No more errors on boot. It could be gitsync issue that is not working now and was activ...
-
- Applied in changeset commit:730790dd972414dc93d687697edd75ab173e0d43.
-
- grep and awk are not called inside "configuring crash dumps", it seems it's related to commit:2085c6de5de1d9cd8864f85...
-
- I've added a screenshot of a 2.1 AMD 64 iso boot procedure
/etc/rc complains that it can not find awk and grep. T... -
-
05:03 AM Bug #2752: Captive Portal Last Activity isn't update anymore --> idle timeout just after login
- Issue solved with 2.0.3 please close ticket.
-
- This issue isn't solved with 2.0.3
With each release I have to modify the function "RADIUS_ACCOUNTING_STOP" in fil...
04/04/2013
-
- Numerous bug fixes and performance optimisations have been MFC'd into 8-STABLE:
http://lists.freebsd.org/pipermail/s... -
07:52 PM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- Either this issue or something similar happens when you change anything on the WAN interface settings page and hit ap...
-
02:57 PM pfSense Packages Bug #2930 (Resolved): NRPE package broken on 2.1
- Hi,
I've installed the latest 2.1 beta software and tried to install the NRPE v2 client (version 2.12_3 v2.1) with... -
- There is not enough information here for a legitimate bug report. Please discuss it in the forum until an actual bug ...
-
02:29 PM Bug #2929: One-way OpenVPN Bridge
- This bug is in pfsense 2.1.
-
- When OpenVPN Bridge connection (Remote Access(SSL/TLS), UDP, tap) is established the clients from local pfsense subne...
-
- I have the same problem.
-
- Not enough information there for a legitimate problem report. Please post/discuss the issue on the forum first.
-
11:07 AM Bug #2927 (Rejected): Link Down Detection
- PFSense 2.1 is not detecting link failure, even with Alternate Monitor IP.
-
11:45 AM Bug #2928 (Closed): Authentication attempts against multiple radius servers should stop when the first reject is received.
- The radius.inc code in pfsense treats anything that is not an radius accept as the same kind of failure. It does not ...
-
- Applied in changeset commit:aa752473de6736186ee0ab6355046b6383521091.
-
06:24 AM Feature #2926 (Rejected): Predefined port name for radius - proxy (1814)
- When configuring pfsense for lan -- wan radius proxying (such as in Eduroam) it would be handy to get the "RADIUS pr...
04/03/2013
-
- Downgraded to very low... with no reason :'(
COME ON! -
- I would really like to see Monit supported as an official package integrated into the WebGUI. It is fully compliant, ...
-
-
06:52 AM pfSense Packages Feature #2825: OpenBGPd: Add options prepend-neighbor and prepend-self
- Hi,
also an Option "set nexthop <ip>" would be great for CARP IP announcing (and perhaps also "set nexthop no-modi...
04/02/2013
-
- Applied in changeset commit:43d049ac6a6710ee2d3c933d6c02ee44c5d81dc3.
-
- URL Table URLs are wrongly added to filterdns.conf. To replicate, just add a URL Table alias pointing anywhere, and c...
-
- vpn_ipsec_force_reload() gets run from /etc/rc.newwanip but it's done no matter what interface goes up/down. vpn_ipse...
-
06:38 AM pfSense Packages Bug #2920: OSPF on interfaces with IP Alias and carp unpredictable
- When applying settings, I get the folowing error:...
-
- I just found out that the interface on fw1 had an ip of 172.20.20.0/24. Don't know how that managed to get through th...
-
- probably more of a feature request, will leave as is for future examination in this context
-
- I have an interface with IP 172.20.20.2 and CARP address 172.20.20.1. Due to legacy, this interface also has IP Alias...
04/01/2013
-
09:08 PM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- Running pfSense 2.0.2 stable with same IPsec tunnel issue (no tunnel data on reconnect, racoon restart needed)
I f... -
08:18 PM Bug #2919 (Resolved): IPv6 - WAN and LAN (DHCP-PD) does not renew address
- The WAN DHCP IPv6 address and LAN DHCP-PD lease time from the provider is 4 days. When the lease expires, pfSense go...
-
03:20 PM pfSense Packages Bug #2918 (Rejected): ntpd doesn't sync if not bound to any interface
- When no interfaces are selected under Services=>NTP, in attempt to use NTP only for timekeeping on the server itself,...
-
-
11:12 AM Bug #2914: Gateway Group Name change causes all rules and OpenVPN interfaces using that group to be invalid
- I actually have code that does the rename through the config. I couldn't submit a pull request because it touches the...
-
- For 2.1 it's better to avoid such a big change, and since a gateway cannot be renamed, apply the same rule for gatewa...
-
- Applied in changeset commit:0ad707c6b93d41bf731c547b49252af4a15a5649.
03/31/2013
-
12:11 PM Bug #2412: inbound 6to4 traffic does not work in pf
- Update:
Upgraded to today's (March 30) snapshot. Now inbound connections work OK.
A little bit scary, however...
03/30/2013
-
- not enough here to make this a legit bug report, feel free to start a discussion on the forum or mailing list and if ...
-
07:11 PM Bug #2917: High CPU Usage
- It appears to be caused by Firefox. As the number of Firefox browsers that are open with pfSense increases, the high...
-
- 2.0.2 running on D525 Atom with virtually zero CPU usage. Atom hardware replaced with Xeon CPU E5504 @ 2.00GHz with ...
03/29/2013
-
- /etc/rc.openvpn does not get passed the interface, so it has no idea what is going on. I can't see an easy way to get...
03/28/2013
-
- as long as it only impacts OpenVPN instances on the interface where the event occurred, it should be fine to call res...
-
- Easy to reproduce - setup OpenVPN client on interface WAN. Have it running connected to a server somewhere. Physicall...
-
- The Group Name is stored directly in the config of firewall rules, OpenVPN interface selection (and elsewhere...?). W...
-
- I have a gateway group VPNgways with WAN=Tier1, OPT1=Tier2. The OpenVPN servers and clients use interface VPNgways. T...
-
04:44 PM Bug #2753: RRD Graphs failes after pfSense upgrade (2.0.1 -> 2.0.2)
- Have been watching status on this issue for a couple months, since a similar scenario has applied to my setup as well...
-
- Applied in changeset commit:e2ec86f40c9573292a46d4ab89ae70e353a99f8f.
-
- This pull request should fix it: https://github.com/pfsense/pfsense-packages/pull/415
03/27/2013
-
09:21 PM pfSense Packages Bug #2902: Snort does not update snort.org (basic?) rules. Possibly clock blocking by snort.org for basic subscribers.
- Issue is that the 2941 rules are not yet available to registered users, only subscribers. Modify the $snort_rules_fil...
-
- Same issue here, have tried the manual update but still no result.
-
- indeed it's not possible to do as described, but I've been irked on more than one occasion by it just bailing out wit...
-
- There is no way to know or detect the fact that the update is signed or unsigned until it has been fully downloaded. ...
-
06:34 PM Feature #2912 (Resolved): Updater handles unsigned updates poorly when used on beta/snapshot releases
- Running 2.1 beta, and notified of an available snapshot update, the updater attempts to download the update but only ...
-
07:32 PM pfSense Packages Bug #2892: "pfblocker_Range2CIDR" function yields erroneous results (pfBlocker v1.0.2)
- When doing some addtional work, I noticed that I mistyped the CIDR generated by the "pfblocker_Range2CIDR" function -...
-
- Applied in changeset commit:d6307bd38ef0d50caf1d0224a845a206f00da1aa.
-
- general FreeBSD issue I suspect is likely already fixed in newer versions. If not, it'll have to be reported upstream...
03/26/2013
-
07:54 PM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- I was using 2.1 BETA also and experienced the same issue as David Duchscher. I had to revert back to 2.0.2 stable so ...
-
01:36 PM Bug #2911 (Rejected): pfsense boot error on usb image w/o usb keyboard plugged in
- I deployed pfSense-2.0.2-RELEASE-4g-amd64-nanobsd_vga.img.gz on a 4gb usb thumbdrive on a Dell XPS 400 with no hard d...
-
-
- Applied in changeset commit:4ad1e4ea74f621c01f9997f46ee7dff412dcc817.
-
-
- Could not reproduce it here using latest snapshot, tier1 was used as expected on rules when it's up.
03/25/2013
-
- thanks
-
09:13 PM Bug #2905: radvd.conf does not include all configured RDNSS entries
- Looks like this issue is resolved. Tested with snapshot:
2.1-BETA1 (i386)
built on Mon Mar 25 15:43:19 EDT 2013
... -
- Applied in changeset commit:3d73a44d84accdb2f70abf705aed9b3858292317.
-
- When there is a tier 1 gateway that's being monitored, and a tier 2 gateway with monitoring disabled, the system skip...
-
- It would be really great feature, cause nginx reaaly great web serser with great proxy possibilities.
and now it i...
03/24/2013
-
- Version Data: (from snapshots)
2.1-BETA1 (i386)
built on Sat Mar 23 22:03:50 EDT 2013 -
- The ipv6 RA does not include all configured dns entries from services_router_advertisements.php configuration page.
... -
06:33 PM Feature #2904 (Resolved): Add checkbox or default option for "verify_identifier on;" on IPsec RSA VPNs
- The ASN1DN field on the "peers_identifier" option within racoon.conf can be used to specify which certificate or set ...
-
03:41 PM pfSense Packages Bug #2903 (Not a Bug): Lightsquid realtime stat 403 error
- With a fresh lightquid install (and with several reinstall attempts) I get the following error when attempting to acc...
Also available in: Atom