Activity
From 07/31/2013 to 08/29/2013
08/29/2013
-
10:20 PM Bug #2882: 6RD not working in latest snapshots
- Hello,
Having the same issue here. I also have Charter for my carrier. I am able to get a IPv6 IP, but am unable t... -
09:41 PM Bug #3112: AHCI disk devices are not detected in Diagnostics > SMART Status
- I have a solid state disk in an Atom D525 that I switched over to use AHCI. I now can see ada0 in the SMART status pa...
- 05:38 PM Revision 35eb76fa: Use ipprotocol to check gateway protocol, this fix a issue that allow to set more than one default gateway when it's dynamic
- 05:38 PM Revision beb7cd97: Use ipprotocol to check gateway protocol, this fix a issue that allow to set more than one default gateway when it's dynamic
- 07:12 AM Revision 806e5979: Call get_uptime_sec from functions.inc.php
- to avoid code duplication
- 07:09 AM Revision df0cb10b: Provide get_uptime_sec in a common include file
- so it is available to anything that cares.
- 06:32 AM Revision 73fa0178: Increased needed memory for APC to 512M + code cleanup
- - Increased the needed memory for APC to 512M as we often run into memory problems on our 256M box
- fixed the RAM ca... -
05:24 AM pfSense Packages Bug #3168 (Rejected): siproxd
- siproxd_registered_phones.php lists a maximum of 10 registered Phones, even if more are connected via pfsense-siproxd...
-
04:00 AM Bug #2833: Add a knob to prefer IPv4 over IPv6 for rare situations that require it
- Agreed - I've had situations where DNS returns a v6 IP, v6 connectivity isn't working, so checking for updates fails ...
08/28/2013
- 11:58 PM Revision 58ddb24f: Merge pull request #785 from phil-davis/master
- Tidy up use of hw.physmem and hw.realmem from get_memory()
- 08:13 PM Revision 5517f604: Use physmem and realmem from get_memory() in the appropriate places
- 08:11 PM Revision 6b0739ac: Use new names for get_memory parameters
- 08:09 PM Revision 386758bb: Use hw.physmem when calculating pfsense_default_state_size
- hw.physmem is the actual amount of memory that FreeBSD/pfSense can get its hands on, so use this for the calculation.
- 08:05 PM Revision 493360f5: Use updated get_memory var names
- The value of minimum_ram_warning is designed to be compared to hw.physmem - so do that. Usse the appropriate physmem ...
- 08:01 PM Revision 517fb89e: Improve var names in get_memory
- realmem is the amount of actual (real) memory installed - the size of the RAM card - e.g. 256MB
physmem is the amount... -
05:54 PM Revision f6339216: s/require/require_once/g for filter.inc to avoid redeclaration errors in some rare cases.
-
-
-
-
-
-
02:09 PM Bug #3163: XS4All IPv6 does not work
- edit: http://forum.pfsense.org/index.php/topic,65832.msg359062.html#msg359062 starting the dhcp6c client manually mad...
-
-
08/27/2013
-
11:37 PM pfSense Packages Feature #3167 (Needs Patch): Add iStat as a package
- This guy did most of the work already:
http://geekness.eu/content/istat-pfsense-and-server-monitoring
Would lik... -
07:50 PM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- The IPv6 address may survive the loss of connectivity *to* the cable modem (i.e., from pfSense's point of view, link ...
-
11:33 AM pfSense Packages Bug #2199 (Closed): Varnish3 fails on start with sysctl-ish errors
- Thanks config syntax fixed from an over-zealous search and replace.
-
11:14 AM pfSense Packages Bug #2199: Varnish3 fails on start with sysctl-ish errors
- Well i found one your mistake were u forgot.
Foward client IP :
(append X-Forwarded-For):
set req.http.X-Forwarde... -
- I think about the problem from before is gone => Close
-
- Yeah i noticed that. Those are two separate bugs. If you can please log two new bugs related to those issues then we ...
-
- Yes, now its better. Saving and running normally.
Works only the first backend, "# backend Web02 not in use." is sho... -
- I pushed a few commits for this - please let me know how it goes.
-
- file: service-utils.inc...
-
10:21 AM Bug #3165 (Resolved): OpenVPN Bridge with Client Specific Override
- Configuring an OpenVPN bridge on 2.1-RC1 (i386) (built on Mon Aug 26 16:51:15 EDT 2013)
I use the Wizard to create... -
- (Automatically sync Varnish configuration changes) is not checked.
in the logs see other
>php: config.inc: [varnish... -
04:49 AM Bug #3161 (Resolved): apinger pings loopback instead of gateway on gif tunnels
-
01:43 AM Bug #3161: apinger pings loopback instead of gateway on gif tunnels
- Thanks, fixed now with Aug 26 16:51:36 EDT 2013 snapshots.
-
- I think this is related to the item I posted 2 days ago on the forum, I also have native ipv6 issue it used to work a...
08/26/2013
-
- Michael Kellogg wrote:
> 2.1-RC1 (amd64)
> built on Mon Aug 26 01:13:05 EDT 2013
>
> ping times on my tunnel ar... -
02:32 PM Bug #3161: apinger pings loopback instead of gateway on gif tunnels
- 2.1-RC1 (amd64)
built on Mon Aug 26 01:13:05 EDT 2013
ping times on my tunnel are still .x ms unlike the norma... -
- Please try later snapshot
-
- Applied in changeset pfsense-tools:commit:b5c0231c6801d25a1555c97c0a82e64b90a994d1.
-
-
01:11 PM Bug #3155: rc.newipsecdns will trigger new static route but didn't delete old route
- The old routes disappear now.
-
05:25 PM Bug #3163 (Resolved): XS4All IPv6 does not work
- Ever since 2.1-RC1 my IPv6 connection (XS4all DHCPv6-PD) is broken.
I use a Vigor120 ADSL modem as PPPoA to PPPoE br... -
- PS; I try to add now the two backends but only the 1st one is in .vcl config file
> # backend Web02 not in use.
i... -
- 2 servers, but no matters how much backends have there.
Problem is in pfsense Varnish config generator, see http://f... -
- Valentin Georgiev wrote:
> php: /status_services.php: The command '/usr/local/etc/rc.d/varnish.sh stop' returned exi... -
- php: /status_services.php: The command '/usr/local/etc/rc.d/varnish.sh stop' returned exit code '2', the output was '...
-
02:33 PM Feature #3162 (New): MLPPP Status of connections
- Would like to see if using Multi-WAN/MLPPP have something in status like 4 of 4 connections up in pfSense's Dashboard...
- 11:33 AM Revision 4b1c16b9: Merge pull request #783 from phil-davis/master
- Add option to specify client management port for OpenVPN client export use
-
-
- The problem still exists.
After deleting IPsec tunnels routing didn't work for these subnets.
I first deleted pha... -
- But this won't open this issue...
-
- If you are having the same issue from #2719, please add comments on it instead of open a new ticket.
- 06:23 AM Revision faf61f12: Add option to specify client management port for OpenVPN client export use
- See forum http://forum.pfsense.org/index.php/topic,63668.0.html and OpenVPN Manager GitHub discussion https://github....
-
- It's such a big change to apply to 2.1 at this point.
08/25/2013
-
- As described on this post: http://forum.pfsense.org/index.php/topic,65231.msg358058.html#msg358058...
-
11:41 AM Feature #3160 (Rejected): Pull request from master to 2.1-RC
- Hi.
Is it possible to also pull the request made on master to the 2.1 RC1 (cf. https://github.com/pfsense/pfsense/...
08/24/2013
-
11:58 PM Bug #2919 (Resolved): IPv6 - WAN and LAN (DHCP-PD) does not renew address
- Thanks for the feedback. I also have done some experimentation and haven't seen any issues, looks like this issue is ...
-
06:46 AM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
At this point, I am no longer seeing any problems.
1) DHCP-PD IPv6 addressing has survived multiple renewals.
...-
11:55 AM Bug #2945: Installation stucks at 36%: /usr/local/bin/cpdup -vvv -I -o /usr /mnt/usr
- I was able to correct this issue by:
# Unplugging the network cables and SFP from my NICs
# Using Option #3 to Bo...
08/23/2013
-
- No, default deny rules should be consistent in their logging. They are. What you're proposing is the opposite of cons...
-
09:50 PM Bug #3159: inconsistency in IPv6 logging
- Chris Buechler wrote:
> it's not inconsistent. If you're logging things blocked by default deny, the IPv6 block logg... -
- it's not inconsistent. If you're logging things blocked by default deny, the IPv6 block logging is enabled too. If yo...
-
- these are the relevant configuration settings:
Advanced: Networking -> "Allow IPv6" is unchecked
Status: Syst... -
- Certificate Manager, for 'Create an internal Certificate' use the correct 'Digest Algorithm'
-
07:48 PM Revision 8f07b51c: Certificate Manager, for 'Create an internal Certificate' use the correct 'Digest Algorithm'
-
02:42 AM Bug #3158 (Rejected): Captive portal, two radius accounting packets sent.
- Hi, I hope this isn't a duplicate, I searched reasonably well.
In the latest version of 2.1 (I took the daily build ...
08/22/2013
- 07:14 PM Revision e89c3caf: Delete old route for remote gateway when its IP changes. It fixes #3155
- 07:14 PM Revision 083a9e6d: Delete old route for remote gateway when its IP changes. It fixes #3155
-
- Applied in changeset commit:e89c3caf2c4e69e255d18c8a19d163b2d36490e0.
-
- Applied in changeset commit:083a9e6d0ba00c4f80859e4c5d450a0b37d552ce.
-
- Each time the peer address changes there will be a new static route to the peer.
The old route should be removed.
A... -
- After deleting IPsec tunnels routing didn't work for these subnets.
I first deleted phase2 and than phase1 and routi... -
- I would like to define groups of rules and add them on block to interfaces.
Grouping interfaces is not efficient. No... - 03:34 AM Revision 475aa214: fix text to remove non-applicable copy/paste from v4 relay
- 03:33 AM Revision afde5956: fix text to remove non-applicable copy/paste from v4 relay
08/21/2013
-
-
-
- Only ping and test port needed to be changed.
-
- This is better handled as a discussion on the forum rather than here in the bug tracker.
Currently there are no fu... -
07:07 AM pfSense Packages Bug #3154 (Rejected): pfSense should not require users' private keys to be uploaded to generate certificates.
- Hi,
In the certificate manager, the UI used to import existing certificates *requires* that you provide both the c... -
07:01 AM Bug #2891: Limiter does not work with high speed
- Screen dumps to se symptoms
1) Create a normal limiter with queue size set under advanced settings:
https://dl.dr... -
- This forum post is probably about same problem. But a much more detailed description:
http://forum.pfsense.org/index... -
- Hello.
I would like to reopen this bug.
There is still an issue.
# I cannot create a limiter with 50Mbpits that ... -
- Benjamin H. wrote:
> Updatet to latest snapshot, 2.1 RC1 amd64 and replaced the NTPD file again with your provided f... -
- The error message "No DS called 'inpass6'" means the database was not converted to new format, what happens when conf...
-
-
08/20/2013
-
- Applied in changeset commit:b4dcdbcff58fab82d8f62bd8641f0c04429218ea.
-
- Applied in changeset commit:8cd1d911dc2f1ecf9fb7cd00ee1a102c35479008.
-
07:45 PM Bug #3153 (Resolved): Captive Portal Status Select List Inop with Vouchers
- Steps to reproduce:
Define CP zones, one with and one without vouchers enabled. When viewing Captive Portal Statu... -
-
- 07:30 PM Revision d318da67: Add scope to target when it is a link-local, it helps ticket #3150
- 07:29 PM Revision 3830eeb3: Add scope to target when it is a link-local, it helps ticket #3150
- 05:39 PM Revision 8f61cb87: Add scope to target when it is a link-local, it helps ticket #3150
- 05:37 PM Revision bd6ff328: Add scope to target when it is a link-local, it helps ticket #3150
-
- freedns.afraid.org also works, http://freedns.afraid.org/dynamic/update.php?<Authentication Token>&address=<IPv6>
- 11:17 AM Revision 86797a92: Merge pull request #779 from CharlieMarshall/fileCss
- remove css from edit.php page
-
- Apparently -cloning has been deprecated in FreeBSD, so that parameter should be removed from the above command.
<p...
08/19/2013
-
08:30 PM Bug #3149: SMART status widget always displays error with SCSI drives
- I've now confirmed across multiple versions of multiple operating systems that SCSI drives consistently report "SMART...
- 08:12 PM Revision 45ce573d: Revert "Improve sh syntax using ${} for all variables"
- This was cherry-pick'd by mistake
This reverts commit 1702a838194d2f4ffaa99359f888a42b0832472a. -
-
-
- Feature described at #2833 can help on this
-
- if it appears you have v6 connectivity and you actually don't, you need to disable IPv6. Having it disabled on all yo...
08/18/2013
- 11:12 PM Revision 289dd691: Merge pull request #778 from N0YB/patch-11
- Update functions.inc.php
- 09:37 PM Revision 4fd09104: remove css
-
02:55 PM
Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Tested using:
2.1-RC1 (amd64)
built on Sat Aug 17 21:32:08 EDT 2013
FreeBSD 8.3-RELEASE-p9
Step 1
Freshly boot... -
- Updater tries to use ipv6 even if ipv6 is disabled.
If ISP connect ipv6 segment to WAN updater uses ipv6 and could n... -
01:31 PM Bug #3104: Upgrade 2.1RC0 code breaks RRD databases on nano
- Here are some related tickets which were perhaps closed prematurely:
Issue #2651
Issue #2159
Please let me know ... -
- This also happened to me when upgrading from the latest stable 2.0 release to 2.1-RC1. The 2.1 build used for the up...
-
06:09 AM Feature #3151 (Resolved): Disable gateway monitoring actions without disabling gateway monitoring
- Mentioned in this thread: http://forum.pfsense.org/index.php/topic,65452.0.html
In sites with single WAN, I still pu... - 02:01 AM Revision ffd2f320: Update functions.inc.php
- May as well remove this errant td end tag too.
-
-
- 12:16 AM Revision e6cfcd26: Update functions.inc.php
- Fix gateway widget size change on first update.
Inner table size changes because the table in update data does not ha...
08/17/2013
-
- Well, it seems that multiple interfaces are supported since v3.0.716. There are also some IPv6 fixes, would be nice t...
- 10:11 AM Revision 44e72b7c: Fix selection of IPv6 target IP for IPv6 Outbound NAT rules.
- This makes it possible (without source hacking) to do many:1 NAT of IPv6.
Some will rejoice. Some will curse.
This ... - 10:05 AM Revision 31202953: Fix selection of IPv6 target IP for IPv6 Outbound NAT rules.
- This makes it possible (without source hacking) to do many:1 NAT of IPv6.
Some will rejoice. Some will curse.
This ...
08/16/2013
- 08:06 PM Revision 5ef99bd9: Obsolete more ntp binaries from base
- 07:55 PM Revision 6d501aef: Use ntpdate from ports also and obsolete base one
-
07:49 PM Revision 17921b7e: Ooops fix this to add only th einterface
-
- 07:43 PM Revision 62580df4: Obsolete base ntpd since we are using the one from ports
- 07:43 PM Revision 4a19d53c: Obsolete base ntpd since we are using the one from ports
-
-
-
-
-
-
- Nope... even after running a self-test, the output from "smartctl -H" remains unchanged. SCSI drives do SMART differ...
-
- IIRC that is the default behavior until you have run a self-test on the drive, whether it is IDE or SCSI.
If someo... -
- OK, that formatting was just a teensy bit annoying... see attached.
-
- This seems to fix it, at least for my case, but I don't have an ATA-based system handy to verify I didn't break it fo...
-
- (As of 2.1-RC1 (i386) built on Wed Aug 14 14:47:17 EDT 2013 FreeBSD 8.3-RELEASE-p9)
The SMART widget always displa... -
-
-
02:47 PM Bug #2882: 6RD not working in latest snapshots
- Hello,
I assume the second build just fixes the new problem with the WAN interface not getting an address at all?
... -
- The first build on Thu Aug 15 had issues. The later build that day should be better:
2.1-RC1 (i386)
built on Thu Au... -
-
-
-
-
-
-
- To ensure proper routing/function with IPv6, when working with IPv6 IPs on some pages we need to make sure to add the...
-
-
-
-
-
- Duplicated by #3149
-
- (As of 2.1-RC1 (i386) built on Wed Aug 14 14:47:17 EDT 2013 FreeBSD 8.3-RELEASE-p9)
The SMART widget always displa... -
-
-
-
-
09:40 AM Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Applied in changeset commit:45c07f167399a5fc900e54ea97d346a05cf23573.
-
- Applied in changeset commit:90af1b8bee63ceabb5e1e11e2eb02b3b7b20f5ad.
-
- This should have been minimized now with the latest fixes in apinger.
Also there is no killing of apinger being done...
08/15/2013
-
- Yes, this was fixed by commit:8b226290 / commit:c6868a8f it just wasn't noted here in the ticket.
-
08:51 PM Bug #3140: pfblocker 2.1 error (Cannot allocate memory) with builds after "Aug 1 19:39:40"
- Update:
This seems to have been fixed in today's build: Thu Aug 15 16:30:12 EDT 2013
I just installed it and t... -
-
- 07:17 PM Revision bc317d1e: Merge pull request #776 from CharlieMarshall/helper
- improve the look of the pop up helper widget
- 07:17 PM Revision f59c7ae0: Merge pull request #772 from CharlieMarshall/jQueryWidgets
- convert dashboard progress bars to jqueryUI
-
- Hi guys,
I just updated my pfsense test vm to the Thu Aug 15 build and now I don't even get an ipv6 address on my ... - 06:17 PM Revision 5ef8ec88: fix swap & temp
-
- The "strange fragmentation problems" are a separate issue entirely (current PF has issues w/v6 frags).
-
- As of {2.1-RC1 (amd64) built on Tue Aug 13 14:23:15 EDT 2013 FreeBSD 8.3-RELEASE-p9}, GIF tunnels still default to 12...
-
-
- 11:40 AM Revision 1702a838: Improve sh syntax using ${} for all variables
- 11:39 AM Revision c0fc63d1: Improve sh syntax using ${} for all variables
-
-
-
-
08/14/2013
-
-
-
-
- 09:12 PM Revision 1a6c12ca: improve the look of the pop up helper widget
-
- Display pfSense interface name on status interfaces
- 06:54 PM Revision e2ddbda7: Display pfSense interface name on status interfaces
- Sometimes it is a bit difficult to work out which interface descriptive name is which pfSense internal interface name...
- 05:43 PM Revision 5a1c54f0: Merge pull request #774 from phil-davis/RELENG_2_1
- Relax advanced options firewall rules tests (2.1)
-
05:38 PM Bug #3147 (Resolved): Adding new interface can cause issues
- When adding a new interface on the (assign) page, it defaults to the first interface that hasn't been assigned. This ...
-
- Relax advanced options firewall rules tests
- 05:18 PM Revision ff6e6929: Relax advanced options firewall rules tests
- Various advanced options are now possible for any protocol since https://github.com/pfsense/pfsense/commit/653bde345e...
- 05:15 PM Revision e2ad288e: Relax advanced options firewall rules tests
- Various advanced options are now possible for any protocol since https://github.com/pfsense/pfsense/commit/653bde345e...
-
- Update, this gets fixed by:
jimp:
Try reverting this commit via the system patches package:
https://github.com/p... - 02:56 PM Revision 9a478340: reduce height of progress bars
- 02:09 PM Revision bc0a344b: convert dashboard progress bars to jqueryUI
-
- After Ermal's last commits to the apinger patches this appears to be working OK again. Failover is working, the comma...
-
- Using the latest apinger and check_reload_status (confirmed via re-compiling and checking sha256), watching apinger i...
- 01:34 PM Revision 38546223: ammend css for jquery progressbars
-
-
-
- 12:51 PM Revision a161bfb8: Make sure an alias is not used by a static route before delete, ticket #2941
-
-
-
- 11:05 AM Revision 90bc28cc: Fix checkes for nested aliases containing FQDNs on static routes. It fixes #2941
- 11:00 AM Revision 42626418: Do not allow to add nested alias containing FQDNs when current alias is used on a static route, ticket #2941
- 10:57 AM Revision cf96a1a9: Make sure an alias is not used by a static route before delete, ticket #2941
- 10:56 AM Revision c6592f21: Add a parameter, off by default, to expand all alias items, including hostnames
-
- Applied in changeset commit:bb9868cafa6bc1be95bf2a1ae80b0bccc1dfc7fa.
-
07:09 AM pfSense Packages Bug #3145 (Resolved): NRPEv2 problem with created configuration and check_nrpe2 (for example)
- Currently I am experiencing a problem with the configuration of NRPEv2-Plugins.
Everytime the configuration is new... -
- Applied in changeset commit:de85521ad54e27c2d0c8212c8ef907a3ac6be76d.
-
- Applied in changeset commit:2a6661305c4f05b312225f42ad931caa9df896b5.
-
01:16 AM Bug #3143 (Resolved): Orphaned OpenVPN Client Specific Overrides
- # Create a OpenVPN tunnel
# Create Client Specific Override
# Verify existence of the override in @/var/etc/openvpn... -
- Duplicate of #2231
-
- Does not work in 2.0.3 (i386).
-
- Applied in changeset commit:90bc28cc9d75c59efc06a3aa319239bf7aafa259.
-
- Nested aliases are still broken, working on it
-
01:52 AM pfSense Packages Feature #3144 (Closed): Package info - Wiki
- Have suggestion to make package info page(which are link in package manager) to be created in wiki
(http://doc.pfsen... -
-
-
-
-
-
-
- not a bug
08/13/2013
-
11:24 PM Bug #3142 (Rejected): Traffic graph widget refresh interval not possible to change or save
- The affected version is 2.0.3 (amd64).
It is not possible to change the traffic graph widget refresh interval and ... -
- Well, it works if you specifically specifies it. And I have no problems with that. Please close this one...
- 08:56 PM Revision 4be0c837: Fix check for existing IP Address in DHCP mapping
- Even the Error message says: "This Hostname, IP or MAC address already exists." the IP Address was not checked if it ...
- 08:53 PM Revision 7a2f4f58: Merge pull request #770 from individual-it/master
- Fix check for existing IP Address in DHCP mapping
-
-
-
- Please discuss the ideas on forum or mailing lists, which are more appropriate places for technical discussions, and ...
-
- Confirm it's working properly.
Also solved : https://redmine.pfsense.org/issues/3138 -
-
- Should be solved in later snapshots.
- 01:10 PM Revision 1016c546: Merge pull request #768 from CharlieMarshall/dyn
- tiny cosmetic change
-
- Thanks.
I had a strong feeling it was related to apinger. - 11:14 AM Revision ce13cc5f: Fix check for existing IP Address in DHCP mapping
- Even the Error message says: "This Hostname, IP or MAC address already exists." the IP Address was not checked if it ...
-
-
-
-
-
12:30 AM Bug #2941: Prohibit adding aliases containing FQDNs in static routes
- Hi,
It seems this fix broke using nested aliases for static routing as system_routes_edit.php line 131-138 assumes...
08/12/2013
- 07:26 PM Revision 0abc8f4a: remove whitespaces
- 07:25 PM Revision f5da0849: change to span all cells
-
-
- Conflicts:
etc/inc/pkg-utils.inc -
-
-
- cause of this is same as #3134 (related to apinger changes in general that we're working on).
-
01:25 PM Bug #3139: pkg-utils function stop_packages causes Syntax error bad fd number with more than one script file.
- Sorry I left out the condition you see the error. Put 2 .sh scripts in the /usr/etc/rc.d directory. Then go to a ser...
-
- I still do not see the issue here!
Does the fwrite terminate execution of the script or something else i am missing? -
01:11 PM Bug #2945: Installation stucks at 36%: /usr/local/bin/cpdup -vvv -I -o /usr /mnt/usr
- just adding a comment for the record:
I found that unplugging devices (in my case an IDE HDD, the adapter to said ... - 12:15 PM Revision 3c249cfa: Remove datetimepicker.js since it's not used anymore
- 12:13 PM Revision f7c908aa: Merge pull request #767 from CharlieMarshall/usermanager-datePicker
- Imrpoves the datePicker on the add/edit userManager page
-
- Applied in changeset pfsense:commit:f8466c3637eb87c406f0c3722eba65b843fcf56c.
-
- Applied in changeset pfsense:commit:afa76eff3d145d089e11b93d95a06d27f3249efa.
08/11/2013
- 04:33 PM Revision 23991e58: change to plus 100 years as opposed to hard coded date
- 04:12 PM Revision 3ccb9689: remove whitespaces
- 04:08 PM Revision 12c2ec2e: improve datePicker on usermanger page
-
01:27 PM Bug #3141 (Resolved): UPNP Interface selection contains default interface names
- The interface selection box in the UPNP module displays the default interface names rather than the renamed interface...
-
01:34 AM Bug #1047: Disable TSO, hardware checksum don't work for unassigned but active interfaces
- Hi, LRO is working TSO4,TSO6 not working on LAGG interfaces. ...
-
- I have been using pfsense for over 2 years now and I love it (master and slave virtualized under ESXi 5.1).
I am usi...
08/10/2013
-
- Call to function fwrite throws error if more than 1 file exists in /usr/local/etc/rc.d. Testing this, even empty fil...
-
- Hi guys,
I spun up my "current" pfsense vm the other day, grabbed the output of "pftop -w 150 -a -b -v rules" via ... -
- http://www.freebsd.org/cgi/query-pr.cgi?pr=172113
http://www.freebsd.org/cgi/query-pr.cgi?pr=156974 -
- I'll add a precision :
The failover work properly when it's the monitor IP that doesn't respond any more (ie: swit... -
- Might be related and extend : https://redmine.pfsense.org/issues/3134
-
- Somehow the message got messed up, here is a better presentation.
h1. Resume
Since RC1 my fail over doesn't swi... -
- h1. Resume
Since RC1 my fail over doesn't switch back to tier1 and stay to tier2 even if tier1 is back online and ha...
08/09/2013
-
- Please post in the forum for assistance/diagnosis until a bug can be conclusively confirmed.
-
- when booting the live memstick image from the snapshots mirror dated 2013-08-08 the boot process is curtailed with a ...
08/08/2013
-
07:56 PM Feature #1811: Monitor PPP for connections stuck in "initial" state
- I also have this issue. PPP sometimes get stuck in Initial state and PfSense does nothing to retry, thus you have to ...
- 06:05 PM Revision a2dc7392: Fix #1047
- * When advanced options (LRO, TSO and CSUM) changes, enable capabilities
again on interfaces
* For lagg and bridge,... - 06:05 PM Revision 47e26c6c: Warn user that change will not take effect immediately
- 06:05 PM Revision f5013fea: Remove duplicate polling set
- 05:54 PM Revision a9e44127: Fix #1047
- * When advanced options (LRO, TSO and CSUM) changes, enable capabilities
again on interfaces
* For lagg and bridge,... -
- thanks
-
04:16 PM Bug #3075: Can't delete unused Virtual IP "referenced by a least one gateway"
- I can confirm that the bugfix is now working OK also on IP-Alias after testing.
*I propose to close this bug.*
Be... - 02:55 PM Revision 22ffa33e: Warn user that change will not take effect immediately
-
- Jim P wrote:
> After the latest apinger changes, If you edit a gateway and change the monitor IP, a save/apply is no... -
- My bad I've explained the problem not correctly :
This are unchecked, the options should be activated on interface... -
- Duplicate of #1047
-
- pfSense Advanced options :
* Disable hardware checksum offload
* Disable hardware TCP segmentation offload
* Disab... -
- Applied in changeset commit:a2dc7392fc3e3a2cbb6584dfcab8e02d26598000.
-
- Applied in changeset commit:a9e4412797c5f8caeb6c7579279b2ecc7d5bfe96.
-
- It still have problems, I'm working on it.
- 12:16 PM Revision 16723984: Remove duplicate polling set
-
- Zeev Zalessky wrote:
> it's was disabled but didn't worked also. i hoped that new version fix the problem :(
It's... -
- it's was disabled but didn't worked also. i hoped that new version fix the problem :(
-
07:47 AM Feature #3136: Captive Portal Increment Id
- Correction | Old
causes all the
remaining id's each time a data row is added or removed
Correction | New
caus... -
- Assign the Pass-though Mac | Allowed IP Address | Allowed Hostnames static id's
that always increases when adding da...
08/07/2013
-
- After the latest apinger changes, If you edit a gateway and change the monitor IP, a save/apply is not changing the m...
- 02:59 PM Revision 5c724215: Do not call -f twice (thx eri)
- 02:58 PM Revision be1ebaa9: Do not call -f twice (thx eri)
-
- Zeev Zalessky wrote:
> driver is updated in "2.1-RC1 (amd64) built on Tue Aug 6 16:41:24 EDT 2013" i checked in sy... -
- driver is updated in "2.1-RC1 (amd64) built on Tue Aug 6 16:41:24 EDT 2013" i checked in system->Advanced->Networki...
- 12:43 PM Revision ed0f54e3: Fix whitespaces
- 12:43 PM Revision b6d4c666: Improvements on Diagnostics -> Routes
- * Add filter expression
* Add limit number of rows option (default 100)
* Run one netstat for each section
* Load net... - 12:17 PM Revision e166769c: Fix whitespaces
- 10:44 AM Revision 92e8cb11: Improvements on Diagnostics -> Routes
- * Add filter expression
* Add limit number of rows option (default 100)
* Run one netstat for each section
* Load net... -
10:20 AM Bug #3045: NTPD crash / doesn't come up
- Updatet to latest snapshot, 2.1 RC1 amd64 and replaced the NTPD file again with your provided file in post #19.
Afte... -
- this is only for specific, confirmed bugs, not support requests.
-
02:11 AM Bug #3133 (Rejected): /test_php.php: No such file or directory while compiling
- The entire log and problems and options that I have chosen to compile pfsense with some extra options and devices has...
- 01:24 AM Revision 29672051: Merge pull request #766 from CharlieMarshall/whitespaces
- remove whitespaces from widgets
08/06/2013
- 10:46 PM Revision 9b50c0ed: remove whitespaces from widgets
-
-
-
-
-
-
-
-
-
-
-
- There hasn't been a new snapshot yet since the patches were put in. Should be one up later today.
-
- In 2.1-RC1 (amd64) built on Thu Aug 1 19:39:40 EDT 2013 driver version still 2.5.0.-8
-
-
-
- When a gateway of a specific type has an event, all services on the interface are restarted, rather than just those r...
-
- Updating the subject again to more accurately describe the core issue here. The other part is a different bug than we...
-
- Applied in changeset pfsense-tools:commit:276eaf1009790760b5fe788156d8ba420f100046.
-
- Benjamin H. wrote:
> Loaded the new ntpd binaries into my firewall.
> Now i got: kernel: pid 21367 (ntpd), uid 0: e... -
- Loaded the new ntpd binaries into my firewall.
Now i got: kernel: pid 21367 (ntpd), uid 0: exited on signal 11 (core... -
05:35 AM Bug #2495: pfsense doesn't seem to know what its WAN IP is
- okey, here is the config file.
also, I've made screenshots.
console_before, ifconfig_before and interfaces_before... -
- Sorry, if I described it too complicated.
I didn't do anything unusual. The configuration for the VM just represents... -
- Your description is a bit not usual here.
You are mixing subnets on different interfaces and its not clear what is w... -
05:12 AM Bug #3128: Active voucher status not restored from backup
- This is not true.
The voucher status *is* backed up with the configuration. At least in Version 2.0.2.
But the stat... -
- Vouchers status are not backed up with the configuration as is not the user login status.
08/05/2013
- 11:07 PM Revision 44551882: Merge pull request #765 from CharlieMarshall/rss
- fix / make RSS widget textarea full width & remove whitespaces
- 10:49 PM Revision 1bc946f1: disable horizontal resizing
- 10:07 PM Revision 14bcaa4b: remove whitespaces
- 09:56 PM Revision 82beeb74: fix / make textarea full width
- 05:09 PM Revision 44ec9215: fix text - add space between sentences. This got lost in another commit
- 05:06 PM Revision 3efa7976: fix text - add space between sentences. This got lost in another commit
-
-
-
- Pierre POMES wrote:
> Pierre POMES wrote:
> > For information, here is the stack :
> >
> > [...]
>
> Forget this, t... -
- Pierre POMES wrote:
> Pierre POMES wrote:
> > For information, here is the stack :
> >
> > [...]
>
> Forget t... -
09:51 AM Bug #3045: NTPD crash / doesn't come up
- Pierre POMES wrote:
> For information, here is the stack :
>
> [...]
Forget this, this stack is wrong.
Rena... -
- I can confirm that NTPD doesn't come up. It happens everytime after reboot the firewall.
- 10:18 AM Revision 3903d524: Update system.php
- fix text - s/by/be
Conflicts:
usr/local/www/system.php - 10:17 AM Revision 44399bd2: Update system.php
- fix text - s/by/be
Conflicts:
usr/local/www/system.php - 10:12 AM Revision a4c83811: typos
- 10:11 AM Revision fa2a57b7: Merge pull request #757 from CharlieMarshall/typos
- typos
- 10:10 AM Revision 3b77e5f2: Update diag_logs_filter.php
- fix typo - s/expression/expression
- 10:08 AM Revision 4c47d7c2: Merge pull request #763 from N0YB/patch-9
- Update diag_logs_filter.php
-
09:56 AM Bug #1112: IPsec GUI/backend missing RADIUS support
- Hello Ermal,
I'll open a ticket regard the IP allocation and accounting problems.
I would like to know if the radi... -
- Please post on the forum for assistance until a bug is confirmed there.
If there is already a forum thread confirmin... -
09:13 AM Bug #3131 (Rejected): Unable to add interface if openvpn client is disabled.
- I was toying with IPv6 but wasn't allowed to make a new interface only after deleting the openvpn interface was i abl...
- 09:07 AM Revision 0ea03ffd: Update system_advanced_admin.php
- fix typo s/Communcations/Communications/
- 09:07 AM Revision 9191b2f6: Update system.php
- fix text - add space between sentences.
- 09:07 AM Revision 61ca05e2: Update interfaces.php
- fix text - Capitalize sentence. s/this/This
- 09:07 AM Revision 9eee0a15: Update services_dyndns_edit.php
- fix typo - s/sperate/separate
- 09:07 AM Revision 321905e5: Update diag_logs_settings.php
- fix text - s/rulessets/rule sets
- 08:15 AM Revision e031ca68: Merge pull request #759 from N0YB/patch-5
- Update system_advanced_admin.php
- 08:14 AM Revision 5121b46d: Merge pull request #760 from N0YB/patch-6
- Update system.php
- 08:14 AM Revision 49613c9c: Merge pull request #761 from N0YB/patch-7
- Update interfaces.php
- 08:14 AM Revision 2e990047: Merge pull request #762 from N0YB/patch-8
- Update services_dyndns_edit.php
- 08:12 AM Revision 959a48a8: Merge pull request #764 from N0YB/patch-10
- Update diag_logs_settings.php
- 07:55 AM Revision 7e750430: Update diag_logs_settings.php
- fix text - s/rulessets/rule sets
- 07:49 AM Revision c05bf25e: Update diag_logs_filter.php
- fix typo - s/expression/expression
- 07:31 AM Revision ac505083: Update services_dyndns_edit.php
- fix typo - s/sperate/separate
- 07:14 AM Revision 823bcb15: Update interfaces.php
- fix text - Capitalize sentence. s/this/This
- 07:02 AM Revision da497780: Update system.php
- fix text - add space between sentences.
- 06:46 AM Revision fd828c9c: Update system_advanced_admin.php
- fix typo s/Communcations/Communications/
08/04/2013
-
- LLDP is now available.
http://doc.pfsense.org/index.php/LLDP_on_pfSense
should be made into an official package ...
08/03/2013
-
06:50 PM Bug #3111: Passive FTP does not pass through pfSense with debug.pfftpproxy=0 (default)
- Bug no longer exists on latest snapshots following the revert of all latest patches on FTP Proxy.
-
- For information, here is the stack :...
-
-
04:30 AM Bug #3100: PowerD spelling mistakes
- this issue is fixed
-
11:50 AM pfSense Packages Feature #3129: Enable LEDs on BCM57780 NICs
- Here’s the FreeBSD PR: http://www.freebsd.org/cgi/query-pr.cgi?pr=180948
> Responsible Changed
> From-To: freebsd... -
- I forgot to mention that with current FreeBSD 8.3-RELENG based pfSense releases, all NIC LEDs cease to work (and rema...
-
- Carried over from bug #3064 on the pfSense redmine project.
Attached is a diff patch against FreeBSD 8.3-RELENG ad... -
- On changing debug.pfftpproxy to test with the reverted patches, I noticed this in syslog:
Aug 3 16:57:54 php: /sys... -
- I could also see that "problem".
Installing pfsense with the live-cd (pfSense-LiveCD-2.1-RC1-amd64-20130801-1938) cr... -
- I just tested it but it doesn't seem to work :(
what I did:
* fresh install in a KVM virtual machine on Debian 7 ... -
- I want to restore a 2.0.2 backup config.xml where also the status of the active vouchers ist stored.
After a fresh... -
04:20 AM Bug #3127: Missing encoding of single quotes in pkg_edit.php / XSS
- The title should end with XSS instead of XXS.
-
- The problem occurs, when a user enters a single quote (') into an input field, saves and then edits again.
Then the ...
08/02/2013
- 10:52 PM Revision 27b745e8: typos
-
-
-
-
-
- Applied in changeset pfsense-tools:commit:a78c704dd68cba9fdf2ee95df13b0898134c4284.
-
- We need to sync up our ixgbe driver with the bug fixes in r253865 to get to v2.5.15.
-
- Probably not broken in general (or the GUI wouldn't work, nor would ssh) but it does have issues with some ciphers, a...
-
- Need to gather some more details, but it appears having a hifn card in a 2.1 system completely breaks openssl. At lea...
- 02:57 AM Revision e2967ba6: fix text - s/occured/occurred/
- 02:56 AM Revision ab9dc5be: fix text - s/occured/occurred/
-
02:51 AM pfSense Packages Bug #3093: squid3-dev missing libgssapi.so.10
- fixed with http://forum.pfsense.org/index.php/topic,62256.0.html
although squid3-dev is pulling squid-3.3.5, not s... -
- I'm getting the same thing in 2.0.3...
- 02:43 AM Revision 653bde34: the state type is required/valid for all specifications of protocol, not
- just the ones formerly listed. For instance, sloppy is valid (and widely
used on 2.0.x and some older 2.1x) with "any... - 02:42 AM Revision dde3cae3: the state type is required/valid for all specifications of protocol, not
- just the ones formerly listed. For instance, sloppy is valid (and widely
used on 2.0.x and some older 2.1x) with "any...
08/01/2013
- 10:55 PM Revision 887d1b08: Merge pull request #754 from CharlieMarshall/new
- add messages to inform user of column limits & change cursor of buttons
-
- Applied in changeset commit:d88e8e657a759c8f79fecf3a54d54b8225520b08.
-
05:20 PM pfSense Packages Bug #3102: bgpd not starting when "network" option is set in config file
- in the GUI itself, I tried "connected" and "static".
the comment on GUI says the following:
_"Announce the specif... -
-
-
- If using vouchers and passthrough MAC addition with concurrent logins disabled, if a voucher code is reused, portal_a...
- 04:21 PM Revision 0a819f22: indentation
- 04:15 PM Revision 8e3e20ab: add user messages and change cursor for theme pfsense_ng_fs
-
03:19 PM pfSense Packages Feature #3123 (Needs Patch): Implement OpenNHRP into Pfsense
- Please Implement OpenNHRP into Pfsense (http://sourceforge.net/projects/opennhrp/) as it's compatible with Cisco DMVP...
-
- Applied in changeset commit:d6be721eed7bcb291b6be55b3e07f6529a21dd03.
-
- Applied in changeset commit:af1251777108de28f71194ea8507fb5e8cd681f4.
-
- /etc/inc/captiveportal.inc Line 1871:
mwexec("/sbin/ipfw -x {$cpzone}-q {$g['tmp_path']}/macentry_{$cpzone}.rules.... -
- If a user adds a pass-through MAC entry for the firewall's MAC address, it will allow all users to bypass the portal....
-
-
-
-
-
-
-
- I seriously don't really care whether it's a workaround or not... How I can prevent pf from dropping legitimate traff...
-
- This cannot be solved for now apart the workaround to allow fragments.
-
- 07:21 AM Revision ebea8b08: Merge pull request #752 from CharlieMarshall/correctWidgetLinks
- add missing links to widget headers
- 07:01 AM Revision b284ad38: add missing links to widget headers
- correct links
-
06:51 AM Feature #3120 (Rejected): WebConfigurator, open help page on new window
- Just a proposition:
When clicking the help button from a page of the web configurator, the help page replaces the ac... -
- Can you please try with tomorrows snapshots.
This should be properly fixed now. -
- Applied in changeset pfsense-tools:commit:29a8a72c23d5844787647cb478f2e672606aa2db.
07/31/2013
-
- Spoke too quickly on that last one, the OpenVPN interface does play into it but it wasn't completely gone when I saw ...
-
- Updated the above again, the OpenVPN part is irrelevant, too. Further testing shows that just a second dead gateway w...
-
- Though rc.openvpn is being called with the physical interface (wan, etc) not the openvpn interface so perhaps that's ...
-
- Changed the subject as it does not apply strictly to IPv6 vs IPv4.
Easy way to reproduce it:
1. Create an OpenV... -
- When using dual-stack on a WAN, and the IPv6 gateway goes down, both IPv4 and IPv6 services on the WAN are restarted....
- 11:17 AM Revision 783228c7: Merge pull request #750 from phil-davis/RELENG_2_1
- Reorder reverse lookup overrides so user-specified ones are effective 2.1
- 10:19 AM Revision 721ea6f4: Reorder reverse lookup overrides so user-specified ones are effective 2.1
- If the user specifies a domain override for 10.in-addr.arpa and also specifies "Do not forward private reverse lookup...
-
- Reorder reverse lookup overrides so user-specified ones are effective
- 08:53 AM Revision fc27d3f4: Reorder reverse lookup overrides so user-specified ones are effective
- If the user specifies a domain override for 10.in-addr.arpa and also specifies "Do not forward private reverse lookup...
Also available in: Atom