Activity
From 05/03/2013 to 06/01/2013
06/01/2013
- 05:18 PM Revision 6c124212: DHCP Server enable/disable change needs filter_configure
- When DHCP Server is enabled or disabled on an interface, the filter rules should change to include or not mention DHCP.
-
12:37 PM Revision aa79f351: Added CURL options to Custom DynDNS
- Added the options for CURLOPT_IPRESOLVE and CURLOPT_SSL_VERIFYPEER in
the webinterface for custom DynDNS -
07:38 AM Bug #3016: IPsec client (or branch office) can't access to Internet over VPN gateway
- Sorry:
Main office
Mode: tunnel
Local Subnet: 0.0.0.0/0
Remote Subnet: BRANCH-LAN
: cat /var/etc/ipsec/spd.c... -
- Don't delete tunnel for main office
-
- Branch office tunnel:
Mode: tunnel
Local Subnet: LAN
Remote Subnet: 0.0.0.0/0
root(1): cat /var/etc/... -
07:32 AM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- I have been testing with m0n0wall (1.8.1b540) and it does not have this problem. Perhaps the teams can collaborate t...
-
03:50 AM Bug #3015: DHCP (v4) won't start because of IPv6 DNS servers in /var/dhcpd/etc/dhcpd.conf
- Thanks for the fast turn around Jim. That fixed it.
-
01:23 AM Revision 9399370b: Don't use invalid or IPv6 DNS servers when crafting DHCP DDNS Zones. Fixes #3015
-
05/31/2013
-
- Applied in changeset commit:9399370b367df7b73b84d605f4f44599c93b0bbe.
-
- Applied in changeset commit:f79a5df0733fe17d4a938381e9175fa2e2abefb1.
-
- The process which writes out the /var/dhcpd/etc/dhcpd.conf file just before starting dhcpd is configuring the forward...
-
04:53 PM Feature #3014 (Needs Patch): Add Variomedia to Dyndns providers
- Could someone please add Variomedia (german hoster and domain registrar - http://www.variomedia.de) to the Dyndns pro...
- 01:11 PM Revision 5789e9f8: Update pot file
- 11:14 AM Revision 1407f6a8: Remove wrongly added file in commit 75f457856a
- 11:13 AM Revision 9b03b76a: Update pot file
-
10:04 AM pfSense Packages Bug #3003 (Rejected): Freeeadius.xml bug
- There is no problems with the message
The value MUST NOT be < 60 and it SHOULD be >= 600. -
09:49 AM pfSense Packages Bug #3003: Freeeadius.xml bug
- http://www.ietf.org/rfc/rfc2869.txt
The Value field contains the number of seconds between each
inter... -
08:53 AM Revision 70946b14: Merge pull request #663 from arsenetar/master
- Add CloudFlare Dynamic DNS Service Support
-
- Seems there is something wrong with the backup file. I tested it here, GUI says 392.43Mb and I checked the file:
<pr...
05/30/2013
-
-
- 07:30 PM Revision ffa1acdc: Update dyndns.class
- Fix Tabs
- 07:21 PM Revision 6bc58a97: Update dyndns.class
- Remove unneeded test variable.
- 07:16 PM Revision 3793649f: Update dyndns.class
- Minor Style Change
- 07:13 PM Revision e26e1f76: Update dyndns.class add CloudFlare
- Add CloudFlare Support to dyndns.class
- 06:26 PM Revision 8780ff35: Update Services.inc add Cloudflare DYNDNS
- Add Cloudflare to the list of DYNDNS services
-
- Back port sharper.inc commit from master to RELENG_2_1
- 04:25 PM Revision 2fbefad6: Back port sharper.inc commit from master to RELENG_2_1
-
- Add dynamic category tabs for better listing all available packages
-
- WebGUI Auto Codeset and Language Dynamics & pfSense.pot updates
-
- Simplify shaper.inc for ipv6
-
- change interface text entry box to drop down menu
-
- improve look of picture button selector
-
06:35 AM Bug #2409: ipfw - entryzerostats
- Using latest snaps
when we use Captive portal, RADIUS_ACCOUNTING_STOP packets are not sent to RADIUS server -
02:24 AM Bug #1980 (Closed): RFC 2136 will not update two records for one interface
- thanks
-
12:59 AM Bug #1980: RFC 2136 will not update two records for one interface
- Related to #2068. It now works on i386/amd64 on version 2.0.3.
I.e. this can be closed.
-
01:04 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- so is there any solution to this, like an updated driver or so?
05/29/2013
- 10:55 PM Revision 310bf9e0: improve look of picture button selector
- 08:55 PM Revision 2a7bfc1f: change interface text entry box to drop down menu
-
-
-
04:55 PM Feature #3013 (Resolved): Better upgrading for a CARP cluster
- Not sure if this is a bug or something we do incorrectly, so I've added this issue as "Feature".
While upgrading a... -
- Sorry but how could a 30 GB compressed file be extracted and only consume 640 MB ? If restoring is not complete and i...
-
- that's the extracted size, not compressed size. Whether it's better to put the compressed size there I'm not sure, pe...
-
- We have installed several releases of 2.1 on AMD64 since it's in BETA stage over the course of several months, but th...
-
-
- 03:58 PM Revision d345f596: Don't gettext() the example strings.
- They must not be translated.
- 03:56 PM Revision 04cdae54: Improve Authentication Containers examples.
- * The first example was wrong (cf. ldap_backed() in auth.inc which
looks for a DC= part to determine a full DN.
* T... - 03:42 PM Revision d57725aa: Fix LDAP Extended Query example.
- The old one was not valid LDAP filter syntax.
-
03:31 PM Bug #3011 (Rejected): Mobile client disconnect but SA not flushing
- 2.1 - 29 may snapshot.
I use a mutual psk+ xauth for mobile clients with Policy Generation on, Proposal Checking obe... -
- I have same problem with 2.0 and 2.1 - 29 may snapshot.
I use a mutual psk+ xauth for mobile clients with Policy Gen... - 01:48 PM Revision 2bba9aef: Fixes #2979
- . Change max value for traffic and packets graphs to 20GigE
. Bump config version to 9.6
. Write a config upgrade fun... - 01:47 PM Revision fa3b33a5: Fixes #2979
- . Change max value for traffic and packets graphs to 20GigE
. Bump config version to 9.6
. Write a config upgrade fun... -
-
-
-
-
-
09:24 AM
Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- Starting to look a lot more like mine was modem related. Replaced mine on yesterday afternoon, been up since then.
... -
- Applied in changeset commit:2bba9aefc21a4e173af3626fb5d08516e35ee47a.
-
- Applied in changeset commit:fa3b33a57e362654551a16a91a5c6b56971ad4c4.
-
- Applied in changeset pfsense-tools:commit:73eee43c2c60f6ffebd507115bbf3c3908f5e5db.
-
07:02 AM Revision 5217befe: Update dyndns.class
- To remove a curl_setopt line that is unused for "dnsomatic", and to allow for all characters to be used in the userna...
-
- URL encoding the user/pass for dnsomatic, since it accepts all characters.
-
- Minor PHP syntax fixes from ExolonDX
- 02:43 AM Revision be47e83c: Deprecate ampersand (by ExolonDX)
- Apply this syntax fix to 2.1 branch (already applied in main after 2.1 was branched - https://github.com/pfsense/pfse...
- 02:41 AM Revision acd8af41: Add missing quotes (by ExolonDX)
- Apply this syntax fix to 2.1 branch (already applied in main after 2.1 was branched - https://github.com/pfsense/pfse...
-
- To remove a curl_setopt line that is unused for "dnsomatic", and to allow for all characters to be used in the userna...
05/28/2013
-
- I placed pull request 656 on git to resolve this issue, by using "rawurlencode":...
- 08:34 PM Revision 853030ac: Do not hide IPV6 setting when system->advanced->network->allowipv6 is false
-
- I managed to reproduce it locally with an ALIX board and can confirm the issue is related to vr driver. It's always r...
-
05:44 AM
Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- I think my issue may be modem related. I thought I had ruled this out but it seems both modems I tested with gave iss...
-
- This is tested and working in several production networks, there are no confirmed issues currently. Please post in th...
-
08:59 AM Feature #1855: NAT before IPsec VPN
- Hi!
I have a same problem as Michele Di Maria. - Please reopen a ticket. -
08:26 AM Revision 368d34c3: Fixes #3001, Check the protocol of the webgui to determine if https is being used for custom ports.
-
-
- Ermal Luçi wrote:
> [...]
>
> Seems the [^_] is wrong here it is not present on earlier versions there, no?
[^... -
- ...
-
- something to be re-evaluated in the future.
-
- I wouldn't make this removed.
The problem is that reply-to/route-to are dynamic based on gateway status.
While stat... -
- I will take a look at seeing if can make this less tricky.
-
- Applied in changeset pfsense-tools:commit:eae00391a109101fc995d3309a6e2d2bdb7be579.
-
- that's not how it's ever worked before, it's stayed sticky to a specific rdr in every previous OS version.
-
- Actually fixed.
I had disabled the per rule src-tracking to mitigate something else.
Though seems it hurts more than ... -
- Please test with new snapshots or gitsync
-
- Probably just a rebuild of ca_root_nss port is needed on the snapshot builder!
Try to fetch from here http://ftp.f... -
- Applied in changeset commit:368d34c31aed69fe5f0c44814367a2658f4b4bc0.
-
- Applied in changeset commit:f9d480ff0b4a0cbd569a600ba6087770226ddba5.
05/27/2013
-
- This is not a general issue, but typically specific to a certain package being installed. Post on the forum for assis...
-
01:02 PM
Bug #3009 (Rejected): Package Manager does not work after updating
- Updated to 2.1-RC0 (i386) built on Sun May 26 19:31:39 EDT 2013. The Package Manager page showed message that package...
-
- There really isn't anything we can do about that. Raise it as a FreeBSD PR if you can reproduce it on a stock FreeBSD...
-
03:37 PM Bug #3010 (Rejected): DC ethernet driver seems to have issues with some multiport card and mother board combinations
- Greetings,
On some mother boards, with multiport 21143 based NIC cards, there seem to be driver problems. Symptoms... - 01:22 PM Revision e434d5c6: Fix whitespace
- 01:17 PM Revision e47d24e4: Fixes to get routes + dns working:
- . Simplify code using new parameter of get_staticroutes()
. Check for subnets instead of ip addrs
. Avoid touch filte... - 11:29 AM Revision 1901463c: Add extra param, off by default, to make get_staticroutes() return hostnames too
- 11:28 AM Revision aa57f965: Last element is always empty, be sure we drop it
- 10:27 AM Revision c82dcc1d: Permit to use aliases containing hostnames on static routes
- 10:23 AM Revision 356e86d4: Use filterdns to update static routes using hostnames
- 10:03 AM Revision 2a2b9eea: Split system_routing_configure() and teach it to deal with hostnames
- 10:03 AM Revision 30ab140a: Add rc.newroutedns to change routes when hosts changes
- 10:03 AM Revision 2d0c5e3e: Make add_hostname_to_watch return ips it's adding to later use
- 10:03 AM Revision 86a5e1a8: Fix whitespace and indent
- 10:03 AM Revision 046583c3: Simplify logic
-
- There is already a function to do it, upgrade_085_to_086. I tested it locally and it worked as expected.
If you ha... -
- Hello,
using HTTPS-Urls with Dynamic DNS gives the following error and no update is done.... -
01:59 AM Feature #3007 (Resolved): "protocol" field in rules does not support selection of protocol 41 (used by GIF tunnels)
- I would like to be able to include traffic that leaves over a GIF tunnel in my traffic shaping for the physical inter...
05/26/2013
-
- Upgrade to 2.0.3-RELEASE - bug confirmed:
ipfw table 1 entryzerostats 10.0.0.83
ipfw: getsockopt(IP_FW_TABLE_ZERO_E...
05/25/2013
-
- Tidy up XHTML
-
- so i believe its not drivers coz it cant be affecting different brands so the next thing that comes to my mind is net...
05/24/2013
- 03:11 PM Revision 4cafb367: Deprecate ampersand
- 03:10 PM Revision c620c181: Add missing quotes
-
02:51 PM Bug #3006 (Resolved): filterdns prevents pfsense to boot up when dns resolution is not possible.
- If dns resolution is not possible (like wan interface is down), it takes too much time for filterdns to timeout durin...
-
-
09:18 AM
Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- Bipin Chandra wrote:
> im suffering it on a alix which has via chipset, mayb others can mention theirs to be sure it... -
- im suffering it on a alix which has via chipset, mayb others can mention theirs to be sure its via drivers because to...
-
06:38 AM
Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- This issue is starting to drive me a bit crazy.
I have multiwan set up with 2 x dsl PPPoE connections and a ppp 3g... -
- ok figured it out, there were one left over <cert/> and <ca/> tag before the actual ones with valid entries, removed ...
-
- no idea how it got there but in older snaps etc i used to use SSH so it might have generated that time and when i sto...
-
- i checked the config file and i cant seem to find it in config file but it shows on my cert list on the gui.
the c... -
- How did they get there?
We'll need to see a copy of the relevant portions of your config.xml not just screenshots. -
- im on latest nanobsd of 2.1-RC0 (i386) and not able to delete orphan CA and certificate entries,s creenshots attached
05/23/2013
-
-
-
- In 2.0.x when you have an IPsec connection bound to a CARP IP, its interface is set as something like: ...
- 11:06 AM Revision 5c0c402a: Partial revert of 5b431a20dea since the introduced parameter is not working as expected
- 11:06 AM Revision f0867239: Use global aliastable and proper fix #2941
- 11:05 AM Revision 019e5031: Partial revert of 5b431a20dea since the introduced parameter is not working as expected
- 11:05 AM Revision 5e2df7fc: Use global aliastable and proper fix #2941
-
- Applied in changeset commit:f0867239c1b15c711ea3c6eefd896c2d2aaefcae.
-
- Applied in changeset commit:5e2df7fc1c71c2e876e8eb1f99f7b3c8419ea72c.
- 12:27 AM Revision 6134dcf5: fixup gitsync for 2.1/2.2
- 12:26 AM Revision 1546aaf0: fixup gitsync for 2.1/2.2
- 12:15 AM Revision 92b5063b: master is now 2.2-ALPHA
- 12:12 AM Revision 2293c0d3: bump to RC
05/22/2013
-
-
-
-
-
-
- the one problem noted here is fixed, URL tables in general work fine. Greg if you have any specific info on replicati...
-
- no shaper config there, no response, no other such reports of problems.
-
-
04:15 PM Revision 9b4df982: Add dynamic category tabs for better listing all available packages
- 02:48 PM Revision da6aebbb: Remove unecessary if
-
- Allow IPV6 bandwidth limiter mask
-
- Widget Firewall Logs Fields
-
02:28 AM pfSense Packages Bug #3003 (Rejected): Freeeadius.xml bug
- freeradius.xml line have a bug
<description><![CDATA[Enter the seconds which should be between every interim-update.... - 01:49 AM Revision 9486a580: Widget Firewall Logs Fields
- In the Firewall Log Widget view time field is of more use than source port and protocol.
Add time field and remove so...
05/21/2013
- 10:53 PM Revision 2d46e1e4: Allow IPV6 bandwidth limiter mask
-
06:22 PM Feature #1009: Active Directory group membership checking
- Pi Ba wrote:
>
> ...
>
> Im not sure if this would mean this issue can already be closed.?..
> Anyway thanks f... -
- This is a configuration issue. Please use the forum for support.
-
02:26 PM pfSense Packages Bug #3002 (Rejected): Open VPN TLS Error
- I have a fresh install pfsense 2.0.3-RELEASE (i386) built on Fri Apr 12 10:22:21 EDT 2013 FreeBSD 8.1-RELEASE-p13
I... - 01:11 PM Revision 757733b5: Fix whitespace and indent
- 01:06 PM Revision 6f25f4d5: Merge pull request #639 from CharlieMarshall/master
- Remove if statement
-
12:04 PM Bug #1974: Captive Portal RADIUS accounting bytes wrong
- Allan Stanley wrote:
> Testing in the 2.0.3 release and it seems to work fine.
> I last tested it in 2.1 beta a mo... -
- Be sure to include your architecture (amd64 or i386) when reporting, that can make a difference.
-
- Testing in the 2.0.3 release and it seems to work fine.
I last tested it in 2.1 beta a month or so ago and it over ... -
- Recent comments indicate this is still an issue.
-
04:51 AM Bug #3001 (Resolved): Captive portal Voucher sync on HTTPS with custom port
- Voucher sync between 2 pfSense instances using webGUI HTTPS with custom port (Ex. 33333) is not working. ...
-
- Sticky connections in combination with relayd in 2.1 is seriously broken. Take this circumstance, relayd listening on...
05/20/2013
-
02:42 AM Bug #1629: invalid state table entries after WAN IP change
- When we have a state like this :...
05/19/2013
-
08:22 PM Bug #2998 (Resolved): Diffserv Code Point options misleading
- In pfsense 2.1 beta1, on the Firewall -> Rules -> Edit page there's an option for "Diffserv Code Point". This is a dr...
05/18/2013
- 09:52 PM Revision f9df0509: Remove if statement
-
07:51 PM Bug #2753: RRD Graphs failes after pfSense upgrade (2.0.1 -> 2.0.2)
- Sorry,
Forgot my logs :... -
- Hy,
I'm running on the pfsense 2.0.3 and since a reboot, my web UI is no more available.
I have exactly the same ... -
- Hy,
I have the same message on a 2.0.3 release.
It seems to block my web UI.
Is there any reason to upgrade to 2... -
03:37 PM Feature #2849: IKEv2 support for IPsec
- Major issue would likely be making isakmpd (IKEv1) and iked (IKEv2) operate simultaneously... unclear if this can be ...
-
- OpenIKED port to FreeBSD 9.0 is complete according to reyk@openbsd.org, as long as IPSEC is enabled in the kernel (st...
05/17/2013
- 05:40 PM Revision 0b03b89f: remove auto-added allow rule for pfsync
- 05:39 PM Revision 8a92bad3: remove auto-added allow pfsync rule
-
-
02:40 PM Bug #2991: OpenVPN w/ IPv6 fails to set ifconfig-ipv6 value in conf
- I can confirm that this is fixed. Thank you!!
2.1-BETA1 (amd64)
built on Fri May 17 01:52:00 EDT 2013 -
- CARP and pfSync should not be impacted from traffic shaper policies.
They have very demanding latency requirment whi... -
- I also have the same issues and following this issue. Maybe I can provide some extra information, sorry if it's doubl...
-
- Fixed on 2.1, see #1767 and commit:7807664d
-
- Fixed on 2.1, see #1767 and commit:7807664d
-
- I send files here to please update all.
i send github one week ago no one import codes for releases.
05/16/2013
-
-
- This reverts commit 47a24491e2ea07a19d360d29325c1780652026a4.
-
-
- 01:35 PM Revision 92b27ea1: Fixes on HA setup:
- - Disable pfsync when it's disabled on GUI
- Remove syncpeer and back it to default multicast address when it's
rem... -
01:10 PM Bug #2910: monitoring-disabled gateway causes wrong tiered gateway in route-to
- Hi Chris and Renato.
I have the exact same issue. My tier2 gateway monitoring is disabled. It's a PPP interface th... -
11:29 AM Bug #2996: DNS forwarder & Domain Overrides does not work thru ipsec tunnels
- excellent! works as suggested
Thanks a lot! -
- Already fixed on 2.1, you must set the source address of the query.
You can do this using custom options on the DN... -
- Effekt similar to #1352 but with ipsec:
2 networks
* .net1.lan [192.168.1.0/24]
* .net2.lan [192.168.2.0/24]
... -
- From reports this seems to be an issue of drivers.
-
-
-
- It's a duplicate of #2491 and it was already fixed on 2.1. I pushed the fix for RELENG_2_0 today.
-
08:08 AM Bug #2995: Unsetting the pfsync synchronize IP doesn't properly set it back to directed multicast
- It is much easier for the devs if you use GitHub to submit a change. Then they can directly review and (hopefully) ac...
-
06:47 AM Bug #2995: Unsetting the pfsync synchronize IP doesn't properly set it back to directed multicast
- Seems that the bug report system mangled my patch. Attaching it as a file instead.
-
- Expected: Leaving the "pfsync Synchronize Peer IP" box empty should set up pfsync to use directed multicast.
Actua... -
- Just to note what I have discovered:
When using transport mode, setting the net.inet.ipsec.filtertunnel=1 sysctl d...
05/15/2013
-
09:34 PM Revision 683992fc: dnsmasq conf won't allow some custom args
- User can't specify or customise some dnsmasq args in custom_options (dns-forward-max, cache-size, etc) because they a...
-
- 05:31 PM Revision 5996862b: Merge pull request #635 from jean-m-cyr/master
- Bandwidth limiter - Disable and blank mask bits input field when mask type is 'none'.
- 03:53 PM Revision 09628a07: Fix indent and whitespace
- 03:53 PM Revision c96e71d1: Fix indent and whitespace
- 03:53 PM Revision 046b8ba6: Fix comment to reflect what function current returns
-
-
11:44 AM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- Could it be that those recent fixes broke passive FTP in some setups? Mine does not work anymore, details are here:
... -
- OK, so net.inet.ipsec.filtertunnel=1 does get the traffic to pf, but it does not get it into tcpdump.
To see the t... -
- Per Ermal, I tried setting net.inet.ipsec.filtertunnel=1 but it didn't affect the traffic, it still doesn't show inco...
-
- When using IPsec in transport mode, the arriving packets show as arriving encrypted on the physical interface, but th...
-
10:41 AM Feature #2994 (Resolved): Allow setting a default scale type for the traffic graphs widget
- I like to have Autoscale (follow) set for the traffic graphs widget and hate having to click on Autoscale (up) to cha...
-
- Similar results here, also on Comcast: The LAN interface eventually loses its IPV6 address, and radvd disappears from...
05/14/2013
- 02:12 PM Revision 1cbbef94: Rework getting PF info via ajax using jQuery
-
- add lines to pfSense.pot file update
be careful first 2 line already have a pfSense.pot file. -
- system info dashboard gettext updates for next translation projects
-
-
- test
-
- Im include gettext areas for next translation projects
- 08:53 AM Revision de4ae554: Merge pull request #637 from phil-davis/master
- Teach Net_IPv6:compress to handle a compressed address as input
-
- I've seen a few sporadic reports of this from reliable sources, so I know it's an issue, but I've tried replicating i...
-
04:31 AM pfSense Packages Bug #2992 (Duplicate): Boot problem after upgrade
- I recently upgraded my pfSense 2.0.2 to 2.0.3 and is no longer working
as expected. It stops in the following line:
... - 06:31 AM Revision b4924d86: Teach Net_IPv6:compress to handle a compressed address as input
- 04:40 AM Revision 3341fcfc: Merge pull request #636 from phil-davis/master
- IPv6 OpenVPN TAP mode typo
- 04:16 AM Revision 60f501ec: IPv6 OpenVPN TAP mode typo
- 04:00 AM Revision d68c18b5: Merge pull request #634 from phil-davis/master
- OpenVPN w/ IPv6 fails to set ifconfig-ipv6 value in conf #2991
- 02:42 AM Revision 8c50a9d8: Bandwidth Limiter - Disable and blank mask bits input field when mask type is 'none'.
- 02:25 AM Revision fe9c774d: OpenVPN w/ IPv6 fails to set ifconfig-ipv6 value in conf #2991
05/13/2013
-
- Turns out out be a bug/feature of Net_IPv6::compress - see https://github.com/pfsense/pfsense/pull/634
-
- Attached a screenshot of the form field that isn't working. The field value is remembered, it's always there, but it ...
-
- Here's my (fixed) conf file for one client. Both clients are static key, site-to-site....
-
- Need more info on the config here - static key? ssl/tls? site-to-site VPN? remote access?
-
- I have two OpenVPN clients configured. Each has "IPv6 Tunnel Network" set to fd80::/64. When the conf file is generat...
-
- Not a good fix. Behavior is the same. At the expiration of the 4 day lease, the LAN and WAN IPv6 addressing does not ...
-
06:04 AM Bug #2951: OpenVPN and alternative monitoring IP in 2.1
- Hi Phillip,
I've updated my installation to: 2.1-BETA1 (amd64) built on Mon May 13 00:54:29 EDT 2013
It is sti... -
- I made a few fixes to the logic of when and which OpenVPN instances are restarted after a linkup/linkdown event. The ...
-
- Hi Renato, sorry for my late reply.
When I boot the machine the gateway log looks like this: (Monitoring down)
...
05/12/2013
-
- Tidy up spelling mistakes
- 08:33 PM Revision 3b2395ae: Tidy up spelling mistakes.
-
03:28 AM Bug #2518: Gateway in DHCP Server Doesn't Use Default Setting
- Darwin Mach wrote:
> Darwin Mach wrote:
> > This bug has re-appeared after updating to the 10 MAY 2013 build of 2.1... -
- Darwin Mach wrote:
> This bug has re-appeared after updating to the 10 MAY 2013 build of 2.1-BETA0 (AMD64)
Has so... -
- This bug has re-appeared after updating to the 10 MAY 2013 build of 2.1-BETA0 (AMD64)
05/11/2013
-
- Allow explicit mask specification in bandwidth limiter.
- 05:26 AM Revision 0b4e7542: Allow explicit mask specification in bandwidth limiter
- Allow explicit mask specification in bandwidth limiter. This backwards
compatible and implements ermal suggestions.
05/10/2013
-
- 12:58 PM Revision fcb1ccaf: Revert "Fix alias expand for hostnames, it should fix #2941"
- Working on a better fix
This reverts commit 0d59cc942f2ee225eccdb375e25f58a6f04fa9c4. -
- Applied in changeset commit:fcb1ccaf2d356148057e9a62a376ce3d4229e980.
-
- Im complate my code for update from gethub pfsense all php pages now supporting dynamic charset codes check it for in...
-
07:53 AM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- Connectivity now persists through the DHCPv6 renewal process, radvd stays up.
Sadly, the connection is still not u... -
- Codeset auto checking pfsense-utils.inc do not need anymore 8859-1 charset
-
- Codeset auto checking pfsense-utils.inc do not need anymore 8859-1 charset
-
- Codeset auto checking pfsense-utils.inc do not need anymore 8859-1 charset
-
- Codeset auto checking pfsense-utils.inc do not need anymore
-
- Auto codeset updating for pfsense-utils.inc
-
- Webgui checks for code now pfsense-utils.inc
-
- include codeset and turkish language for next snapshots
-
- confirmed fixed. and the other filterdns issues we've been discussing the last few days are fixed too now Ermal.
-
- "services_dnsmasq.php" refers to itself as "DNS forwarder options" but some of these appear to be able to apply to wh...
05/09/2013
- 03:26 PM Revision 0d59cc94: Fix alias expand for hostnames, it should fix #2941
- 02:58 PM Revision 41c64d75: Revert "Add Turkish to the list of available languages, fixes #2986"
- Will be done again for 2.2
This reverts commit 705950edbc09270fccbec0c5d8dd99b004704c6e. -
Have installed ..
2.1-BETA1 (amd64)
built on Thu May 9 07:06:51 EDT 2013
... will need 4 days uptime to val...- 12:44 PM Revision cdf0ac69: Update pt_BR translation
-
12:07 PM
Bug #2627: Old delegated prefixes are not removed from the LAN interface
- As a note, the value configured for "DHCPv6 Prefix Delegation size" is 64, but shows up as 0 in the config below:
... -
- Could you please share <interfaces> section from config.xml and the content of /var/etc/dhcp6c*.conf with me?
-
11:43 AM
Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Forgot to add, this test was performed on:
2.1-BETA1 (amd64)
built on Thu May 9 07:06:51 EDT 2013 -
11:42 AM
Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Freshly booted pfSense box:
Has IPv6 on WAN interface, has no IPv6 on LAN interface, does not give out any IPv6 ad... - 12:05 PM Revision a861c4de: Update translation template
- 12:00 PM Revision e0d7375d: Move pot translation file to en/, default locale directory
- 11:57 AM Revision 4c13b000: Move Turkish translation files to tr/, the default locale directory
- 11:05 AM Revision db7a628c: Replace all linklocal checks by is_linklocal()
- 11:05 AM Revision 19341491: Create is_linklocal() to validate ll addresses
-
- Applied in changeset commit:0d59cc942f2ee225eccdb375e25f58a6f04fa9c4.
-
- still the same as what I noted in an earlier update. It's correct on the alias edit screen, but on system_routes_edit...
-
- Applied in changeset commit:41c64d75038538225f2df720148bda5be79d63f8.
-
- Renato Botelho wrote:
> Applied in changeset commit:705950edbc09270fccbec0c5d8dd99b004704c6e.
After the change (S... -
- In order to have Turkish language working all pfSense pages charset must be changed to UTF-8, what is not going to ha...
-
- You can find instructions on github help:
https://help.github.com/articles/using-pull-requests -
- i never used like github system can u contact for me in skype ? add me tech5050 please i must talk to you.
-
- You can use github and send a pull request with all changes. It's the best way to submit patches.
-
- last change
system.inc changed
i re sending zip file -
- after that changes need rename folders in
/usr/local/share/locale
tr_TR.UTF-8 to tr
and
pt_BR.ISO8859-1 to pt_BR -
- ignore #4 message text editor not give all codes
i send a files in zip here.
and lines copying here
head.inc
... -
- i found a fixes
Step 1: *include code*
/etc/inc/system.inc
@/* Init language environment */
function system_... -
- note : after the head.inc line 16 changes turkish language works %80 diag_backup.php not working correctly.
i thin... -
- function set_language($lang = 'en_US', $encoding = "ISO8859-1") {
putenv("LANG={$lang}.{$encoding}");
setlocale(L... -
- After the change (System:General Setup > English to Turkish) is not effect, still WebGUI shows english language.
-
- confirmed working
-
-
- confirmed fixed
-
-
- fixed
05/08/2013
-
- 06:45 PM Revision 30ad8553: Nuke interface_track6_dhcp6_configure()
- This function does 2 unecessary things:
. Remove the IP address from interface set as Track, what is wrong and
sho... -
-
04:31 PM Bug #2988 (Resolved): Aliases not displaying in Diagnostics-Tables
- 2.0.3-RELEASE (amd64)
When creating an alias, it does not always appear in Diagnostics-Tables.
If I create an ali... -
- Please test it again with tomorrow's (May 9) snapshots.
-
- Please test it again with tomorrow's (May 9) snapshots.
- 11:44 AM Revision 705950ed: Add Turkish to the list of available languages, fixes #2986
- 11:43 AM Revision 41bd4359: Add Turkish translation files, ticket #2986
-
08:39 AM Bug #2941: Prohibit adding aliases containing FQDNs in static routes
- I'm running the May 2nd snapshot, which seems to have the patches listed in this ticket.
Was I testing correctly? ... -
- Josh,
Are you using a recent snapshot? -
- Please try on a current snapshot, and report the results on the forum. If a bug is confirmed there, it can be revisit...
-
08:29 AM pfSense Packages Bug #2987 (Rejected): 2.1 beta build Wed Apr 17 14:20:09 EDT 2013
- IPSEC Mobile Clients - when connected, the widget on the dashboard and the Status - IPSec - Overview does not show th...
-
-
-
-
- Applied in changeset commit:705950edbc09270fccbec0c5d8dd99b004704c6e.
-
- Turkish language complated %91 we need test for next snapshots please import our language thank you.
http://pootle...
05/07/2013
- 03:15 PM Revision ddae03ad: Merge pull request #627 from phil-davis/master
- Optimize which OpenVPN instances are restarted
- 02:40 PM Revision 6d49e2ba: Revert "Fixes for track6 interfaces:"
- It's not the correct fix
This reverts commit e8307ae03e2769bd0ebaa4b9441ac797b50a3800. - 02:34 PM Revision be00850b: Remember which interface was used by each OpenVPN conf
- When interfaces go down and up we need to know which interface (vr1, vr2 etc) each OpenVPN instance is using so we ca...
- 02:31 PM Revision e960b298: Optimize which OpenVPN instances are restarted
-
02:29 PM Feature #2985: Default gateway switching switches to lan gateway if multi lan config
- It only skips gateways on interface lan and not on opt1:...
-
- If you have multi lan config with gateways on it, it could switch to local gateway.
I suggest to mark gateways for... -
- Since route-to and reply-to rules are added, no routing entries are needed any more.
# This code worked only with ... -
-
- Restore default route after HOTPLUG linkup
- 12:24 PM Revision 252612d7: Fix wrong check added on commit 1f64b66bf0 that was checking openvpn server twice and don't checking openvpn client
- 12:20 PM Revision e8307ae0: Fixes for track6 interfaces:
- . Do not remove link-local when it's already correct
. Let dhcp6c deal with tracked interface IP -
- We couldn't reproduce it. It's always reproducible on your environment? Are you sing a recent snapshot?
-
- Should be fixed after pull request was merged
-
- The optimized version is pull request https://github.com/pfsense/pfsense/pull/627
I believe this is all working nice... -
- This pull request makes it all work as far as I can see: https://github.com/pfsense/pfsense/pull/625
There is some m... -
10:40 AM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- There is no FTP traffic going out of WAN1.
-
01:48 AM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- I see the same mismatched sequence number going out of WAN2. I have not checked for any traffic going out of WAN1, bu...
-
- You see the same mismatched sequence number or you see traffic goign out of WAN rather than WAN2?
I know there are... -
- This should be have been fixed by pull request https://github.com/pfsense/pfsense/pull/626
Once it is out and tested... -
- When I disconnect the WAN cable to the internet, the default route disappears (that is OK - the WAN is down!).
When ... - 10:08 AM Revision 8e47f55b: Reload routes etc when rc.linkup happens
- When a link comes up, call interface_configure with p2=true. This makes it run various extra routines such as system_...
- 10:03 AM Revision 6ddfa6c2: Add includes to interfaces.inc
- There were some includes needed when calling into here from rc.linkup - somehow everything else that calls interface_...
-
- For provisioning and deployment there must be diffent options (mostly 66&67) for each vendor or device class.
In 2.1... -
- Fixup handling gateway argument to rc.openvpn
- 05:59 AM Revision 1f64b66b: Handle gateway argument to rc.opnvpn
- Various fixups to make this work. Now I can:
- Unplug an interface, any OpenVPN servers/clients in a gateway group us... - 05:53 AM Revision be2a18bf: Fixup gwlb functions related to gw failover
- Make apinger pass the gateway parameter both when an alarm alarms (gateway is down) and when it comes good (gateway i...
-
- pretty sure this is a problem that only existed for a short period of time, definitely not currently an issue.
-
- I am having no trouble with this on multiple Alix nanoBSD systems - builds Fri Apr 5 00:57:50 EDT 2013 and Sun May 5 ...
-
- +1 - this would allow us to effectively tell pfSense what are the useful gateways, and in what priority order. It wou...
05/06/2013
-
11:49 PM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- With the latest build there is no change:
2.1-BETA1 (amd64)
built on Mon May 6 16:54:02 EDT 2013 -
- Latest snapshots should behave better for this situation.
-
-
-
- I can confirm that on 2.0.3 it looks like mod_evasive is now there. Ermal, thank you for getting this fixed.
I'll... - 04:01 PM Revision 02203e6d: Fix IPv6 Prefix ID default value
- . Always initialize it to 0 when it's undefined
. Remove unecessary initializations and checks
. Bump config version ... -
- linkup events will never be aggregated by check_reload_status hence no missing.
-
- Implemented for ALTQ in 2.1 snapshots.
-
- thanks
-
- Running May 2nd 2.1 snapshot I can confirm that this is fixed.
# System -> User Manager
# Edit admin user.
# Che... -
- I'm trying to confirm that this is fixed but I'm not having success. May 2nd 2.1 snapshot, well past when the change...
- 11:36 AM Revision 94597308: Do not show URL twice, it helps ticket #2978
-
- Running 2.1-Beta1 (i386) Thur May 2 00:11:40 EDT 2013 Nanobsd 2G
The problem I'm seeing is that when I change the ...
05/05/2013
-
09:56 AM Feature #2980 (Closed): Clickable "sort" by IP or username PPTP VPN
- I would like the ability to sort users by either username or IP-adress.
Currently not able to click either one and... -
- It worked fine for me as well. And I also fixed the cosmetic bug in the alias list.
-
- Fix dnsmasq host overrides 'enabled' check.
-
12:19 AM Revision a80cb9ca: Fix dnsmasq host overrides 'enabled' check.
05/04/2013
-
-
03:06 PM Feature #1434: Radius Accounting in OpenVPN
- does anyone have a solutions for this? it's really important to be able to track users who have been connected in th...
-
08:24 AM Bug #2495: pfsense doesn't seem to know what its WAN IP is
- Is this bug currently being worked on?
Is there any way to help fixing the bug?
05/03/2013
-
- Currently we restrict the max values for "valid" traffic data thusly in source:etc/inc/rrd.inc#L264 :...
-
- Aside from the URL bring printed twice in the list of aliases, that works for me on a current snapshot. I added the a...
-
06:30 AM Bug #2978 (Closed): Broken URL table
- URL table seems broken in 2.1
I have created a simple URL list available at http://www.todoo.biz/facebook.txt
An... -
03:46 AM Feature #2977: Connection tracking like ipcop
- (http://192.168.1.1/diag_dump_states.php) Yes, but there is huge difference in the look and feel.
-
- already exists. Diag>States, and States Summary.
-
- !http://www.ipcop.org/1.4.0/en/admin/images/connections.png!
[[http://www.ipcop.org/1.4.0/en/admin/html/Info-AW.... -
- Had Wan interface ip conflict was not reported.
Luckily, i noticed it during in bootup messages. -
- already exists. ARP moved from ... to ... messages for hosts on connected networks, and "X is using my IP x.x.x.x" fo...
-
- Detect IP conflict in the network
-
- this is fixed
Also available in: Atom