Activity
From 03/22/2011 to 04/20/2011
04/20/2011
-
08:28 PM Bug #1448 (Closed): PPTP VPN Radius authentication and accounting don't work
- doubly confirmed, accounting and auth work fine. The posted config is correct. If you're seeing no traffic to your RA...
-
- it works fine. Also disables fine, you have to actually disable it by unchecking, you can't just take out the IP.
-
08:01 PM Bug #1448: PPTP VPN Radius authentication and accounting don't work
- Instead of opening a new bug i figured i would add to this.
I am having the same issue with PPTP authenticating to... -
03:33 PM Bug #1448: PPTP VPN Radius authentication and accounting don't work
- attached files from requested directory
-
03:19 PM Bug #1448: PPTP VPN Radius authentication and accounting don't work
- Can you show the contents of cat /var/etc/pptp-vpn/*
-
- PPTP VPN configured to use radius authentication and accounting. no traffic to radius server. no users authentication...
-
10:59 AM Bug #1446: Export of internal generated cerificate (crt) ist empty when made from encrypted CA key
- Might be something specific to your CA then, hard to say without trying it out. I imported a CA I had made a long tim...
-
10:55 AM Bug #1446: Export of internal generated cerificate (crt) ist empty when made from encrypted CA key
- Annexed the properties of the imported CA-certificate in case that the properties of the CA are the problem.
(create... -
- Tag in /cf/conf/config.xml is empty:
<cert>
<refid>4daeeb458a580</refid>
<descr><![CDATA[thomas_c]]></descr>
... -
- I performed that exact same sequence (imported a CA, generated a certificate, and exported) and I got the expected da...
-
- After generating a own certificate the exported crt is empty.
How the problem can be reproduced:
# An own CA-cert... -
- Yeah I had the wording in that wrong. There may be something else going on in P2P/TLS then. People on the forum were ...
-
- that commit looks like it would have been ok, it was changed for P2P TLS, not shared key.
-
02:44 AM Bug #1417: OpenVPN client specific overrides doesnt work by default
- Hm, okay. But I use certificate based authentication....
So please reopen? -
- It would help if the stored certificates could be exported also in PKCS12-format, because many clients (like some on ...
04/19/2011
-
- Apparently it's just not allowed to have a shared key tunnel and push with client-config-dir. Backing out changes, as...
-
03:37 PM Bug #1318: Certificate error: certificate subject does not match signing request subject
- Also confirmed with RapidSSL with GeoTrust as the intermediate CA.
2.0-RC1 (amd64)
built on Thu Apr 14 11:13:23 ... -
05:34 AM Bug #1432: Carp Vips are promoted to master before firewall filter load
- I caught it, the master firewall started to work after this log line:
Apr 19 10:03:27 pfsense1 check_reload_status... -
- The situation has improved, but not resolved yet... (tested with build 18 23:29:41 EDT 2011 i386)
In the image att...
04/18/2011
-
- the secondary has no need to blow away its CARP IPs and recreate them unless there has been a CARP change, and never ...
-
- In etc/inc/interfaces.inc, before line 1827, there could be something like:
$ints = get_interface_arr(true);
fore... -
- Makes sense that the VIPS are destroyed and recreated after reconfiguring on the backup machine, unfortunately when t...
-
- Well this is normal considering that the slave just destroys and recreates its vips and an election occurs in carp co...
-
04:38 PM Bug #1439: WAN PPPoE config dropped on update from 1.2.3 (nanobsd) to 2.0-RC1 (snapshot 20110415-1518)
- Here's the old and the new config. I replaced passwords and usernames, also removed some settings like firewall filt...
-
- The upgrade log won't tell us anything relevant here. We need the before and after upgrade versions of your config.xm...
-
04:19 PM Todo #1438: Add override for CSR request->response subject mismatch
- Better than a patch: I did a merge request on https://rcs.pfsense.org/projects/pfsense/repos/yakatz-sandbox/commits/e...
-
- What I meant to say there is this patch fixes the problem.
I am working on a patch that will actually completely wor... -
- Here is the simple patch. A better one is on the way.
-
- This seems to have been fixed by Seth.
-
-
02:47 PM Bug #636: layer7 not work correctly
- Still not working here either (2.0-RC1 (i386) built on Mon Apr 18 10:01:33 EDT 2011). L7 container set to block HTTP....
-
- No its not like #174. This is in console and i am not sure that it has been forseen for such use.
I will give a look... -
12:18 PM pfSense Packages Bug #1443: Squid errors on updating version
- I definitely have the errors, as does Nachtfalke as per http://forum.pfsense.org/index.php/topic,35673.0.html
I in... -
- I can't reproduce this. I have installed/reinstalled/uninstalled and starting and stopping the service works as expec...
-
06:39 AM Feature #1431: PPPoE LQR Echo
- I try setting up suggest by Calvin Teh, and it working, but after restart it come back to the problem.
-
- I try setting up suggest by Calvin Teh, and it working, but after restart it come back to problem.
-
- I'm also having same problem. Any update regarding this issue
04/17/2011
-
- More information:
Reinstalling the package allows it to run for the period of time that the system is up. As soon ... -
- not convinced that's a driver problem, sounds like it may be config related, but if it is, not something we can fix. ...
-
- This is a follow-up to bug 1444. Installed via pfSense-memstick-2.0-RC1-i386-20110417-0359.img.gz.
As described i... -
- PS: the files changed are:
config/snort/index.php
config/snort/snort.xml
Thanks!
Michele -
- According to this thread http://forum.pfsense.org/index.php/topic,33812.0.html I added a index.php in the snort direc...
-
- ps: the file changed is
config/widget-snort/snort_alerts.inc
Thanks! -
- Made the change, waiting for someone to merge my git clone in the master
-
- BTW, this sounds like bug 174, fixed a year ago.
-
- I just installed 2.0-RC1 via pfSense-memstick-2.0-RC1-i386-20110417-0359.img.gz with the quick install wizard (SMP ke...
04/16/2011
-
- UPDATE: I have just reinstalled the latest version of 2.0RC1-i386-20110415-11416 and I still have the same issues. Th...
-
- As per http://forum.pfsense.org/index.php/topic,35673.0.html some of us are experiencing Squid errors when updating f...
-
- Only if you're willing to pay to have it fixed. Otherwise it gets fixed when we get to it.
-
03:03 PM Bug #1421: Disconnecting PPTP VPNs drops IPsec when using wrong PPTP server IP
- is it possible to rise priority from normal to high?because i have to disable PPTP VPN on my production firewalls wit...
-
- any fix for this bug?
-
- cron job was broken when the server died recently, fixed.
-
11:32 AM Bug #1440 (Closed): Bogons list is outdated
- The pfsense bogon list in http://files.pfsense.org/mirrors/bogon-bn-nonagg.txt is hoplessly outdated. The following ...
-
- not going to remove it as it could possibly change though it most likely won't, and the same mechanism will be used f...
-
- Once the IPv4 bogons list is updated with the updates in http://redmine.pfsense.org/issues/1440, the ipv4 bogon list ...
-
- Actually, it wasn't clear to me that the config partition is shared between the slices. I thought it was stored with...
-
- That is a known and expected problem. There is no way around that since both slices share the same config. No code we...
-
- I just upgraded a firewall from 1.2.3 to todays snapshot, using pfSense-2.0-RC1-4g-i386-20110415-1518-nanobsd-upgrade...
-
- I just upgraded a firewall from 1.2.3 to todays snapshot, using pfSense-2.0-RC1-4g-i386-20110415-1518-nanobsd-upgrade...
04/15/2011
-
- The internal automatic rule is wrong as well. Regardless of how many clients you have, the outbound NAT rule it makes...
-
- Just a bit of bug checking and the code that I mentioned on the mailing list will be ready (I am waiting on my CA to ...
04/14/2011
-
- It appears that if the countryName in the requested subject is not recognized by openssl, it throws these two errors ...
-
- this has been good for a while, using it on a number of installs.
-
07:11 PM Bug #1436 (Resolved): firewall syslog stops working after reboot
- 2.0-RC1 (i386)
built on Thu Apr 14 15:32:22 EDT 2011
You are on the latest version.
Platform nanobsd (1g)
H... -
- Hi,
Is it possible to add the squid log module rather than storing the logs
locally on the pfsense device?
If... -
11:08 AM Feature #1434 (New): Radius Accounting in OpenVPN
- Radius Accounting packets are critical to any enterprise implementation of OpenVPN due to compliance reasons. It is a...
-
06:03 AM Bug #1149: nano build - upgrade size failure on USB flash drives
- newbie on bsd and pfsense.
filed a bug week or so ago, got rejected. found this, exactly my problem.
currently ... -
- newbie on bsd and pfsense.
filed a bug week or so ago, got rejected. found this, exactly my problem.
currently ...
04/13/2011
-
08:13 PM Bug #1402: When creating a QinQ it works until reboot.
- Is there any news about this issue??
Saludos! -
06:01 PM Bug #651: Multiple gateways on WAN interface
- Ermal Luçi wrote:
> The problem with this is that apinger will bind to the same address and has no idea that the mon... -
04:34 PM Todo #648: Move "base" packages such as RIP, OLSR, etc, back into packages
- Currently I know about at least 5 installations using the LiveCD in corporate installations
(+ my own one).
The r... -
- my pf info
2.0-RC1 (i386)
built on Tue Apr 12 11:38:49 EDT 2011 -
at last i found my periodically ipsec disconnect problem after researching in redmine,i'm using pptp from home to c...
04/12/2011
-
-
05:13 PM Bug #1397: ntpdate sync not functioning properly
- Hi Jim P,
That change seemed to do the trick. NTP is running just perfectly after making those changes and rebooti... -
- I updated this again with commit:cd11a14
ntpdate sync is completely gone, since simply starting ntpd with -s will ... -
- I updated this again with commit:cd11a14
ntpdate sync is completely gone, since simply starting ntpd with -s will ... -
01:24 AM Feature #1431: PPPoE LQR Echo
- tricking the WAN interface to become a DHCP connection and back to PPPoE works . However after a system restart, the ...
-
- I don't have anything with PPPoE handy but it looks at a glance like keep-alive should always be present. From interf...
-
- Any config change causes the CARP IPs on the secondary to come up as master and back down to backup, which is unneces...
04/11/2011
-
- Confirm not working on amd64 platform as well
2.0-RC1 (amd64)
built on Sun Apr 10 21:49:29 EDT 2011 -
- I was able to reproduce this, and committed a fix on Saturday. This is fixed on current snapshots, and confirmed with...
-
09:04 AM Bug #1428: DNS servers not assigned
- Same problem here after update... ISP DNS servers not applied. Had to enter DNS servers manually.
2.0-RC1 (i386)
... -
- you can close it. it's work as explained in your update
-
- When the "master" machine boots, the CARP ips are promoted to master immediately, even before the firewall filters ar...
-
01:10 AM Bug #1399: rrdtool respawning too fast
- Noticed this message in syslog long ago.
-
- one thing that I have noticed is , when WAN interface is on DHCP the keep alive option is working perfectly fine. Cha...
04/10/2011
-
- mpd5 mentions it as a "set link keep-alive seconds max" parameter under mpd.conf .. but that mpd.conf is no where to ...
-
- you'll have to look into mpd 5 and see if it supports that.
-
- Some ISPs that I have experienced with locally requires LQR echo reply sent from the client to ensure that the sessio...
-
- actual cause in #1431
-
- Dear All,
I have found the root cause of the issue that the ISP requires a LCP echo inteval reply of 30 seconds in... -
05:10 AM Bug #1347: ntpd not starting
- with the Fri Apr 8 18:33:38 EDT 2011 build the
issue seems to be gone.
Thank you
04/09/2011
-
- need dhclient logs, that just looks like you aren't being assigned DHCP servers.
-
- They should be assigned via DHCP by the ISP but PFSense will not accept them so I have assigned them manually in gene...
-
- Not enough info here. Are these assigned manually? By DHCP? Any errors in the logs or console?
-
- I just updated my PFsense install to the latest version (2.0-RC1 (i386)built on Fri Apr 8 18:33:38 EDT 2011) and DNS ...
-
- here are the screenshot attachments for the PPPoE configuration
04/08/2011
-
- Hi Jim P,
I've also applied your commits, but it didn't resolve the issue. Once I applied them and started the dis... -
- The ntp issue would be separate (it has its own ticket), but I didn't test with openvpn. I suspect that's because Ope...
-
04:59 PM Bug #1397: ntpdate sync not functioning properly
- Jimp, I've applied your commits and I see the service is now running fine at startup and is able to stop and restart ...
-
- Should be fixed as of commit:edf99ce (See also commit:2db351a and commit:54c1859)
-
- Use the pre button for code.
The issue here is somewhat moot: The UP kernel is eventually going to be phased out. ... -
- Let's try one more time...
> if [ $KERNELTYPE = "UP" ]; then
> > -if [ -f /kernels/kernel_SMP.gz ]; then-
> > +if ... -
- The formatting of that ticket came out really bad.
> if [ $KERNELTYPE = "UP" ]; then
> > if [ -f /kernels/kernel_SM... -
- From the mailing list:...
-
-
- If you have a WAN failure or don't have working DNS, then launching ntpd is just as useless because it uses the same ...
-
- Applied in changeset commit:"02d99511539a3312f8aab54b7dd1cdcaec9c0847".
-
- Strike that. Looking at the backend code, you must be using "Peer to Peer (SSL/TLS)". It seems that one case was miss...
-
- What exact settings are you using for your OpenVPN server?
I just set up an instance with the wizard and it does h... -
- I have the following content in the client specific configuration....
-
- On configs upgraded from 1.2.3 at a minimum, and possibly others, the automatically generated IPsec rules do not trim...
04/07/2011
-
07:32 PM Bug #1425: pfSense stops receiving traffic on 'bge' driven interface
- The FreeBSD bug indicates that the bug is triggered by high traffic/bandwidth via the interface.
If someone can re... -
- It will be 8.1. Will see if we can easily back port the 8.2 driver if that is the fix.
-
- Hi guys,
This bug has happened to our installation twice, now. Seemingly randomly, the bge0 interface (I have bge0... -
-
- Ok here are some screenshots:
1. First I create the QinQ with the SVLAN 13 and as member the VLAN 1000.
!1.png!
... -
- Please provide the logs and screenshots to help with this.
-
10:58 AM pfSense Packages Bug #1385: Open-VM-Tools not working anymore
- I can confirmed this issue on i386 platform :...
-
- I just reinstalled to i386 (and change VM type to FreeBSD 32bits). It seems much more stable now...
Let's wait a f... -
- here is an attachment of the packet capture done on the WAN interface. Ping was initiated as soon the PPPoE connectio...
-
- It would be consistent to add/show the OpenVPN, PPPoE, PPTP, etc.. under interface groups as permanent entries since ...
-
07:27 AM pfSense Packages Bug #1423 (Resolved): Open-VM-Tools package script files broken in 2.0rc-1
- /usr/local/pkg/open-vm-tools.inc seems to have issues.
One of which is an erroneous "A " at the end of a here doc ... -
07:10 AM Feature #1422 (Closed): short voucher codes
- Please add an option for shorter voucher codes. For home use 5 or 6 chars codes would be sufficient instead of the or...
-
- Thanks Ermal, lastest snapshot is OK.
Regards
04/06/2011
-
- mmmm...sorry because I am not giving any screenshot, but im not at the office right now.
I have been testing like ... -
- Disconnecting PPTP VPNs drops IPsec when using a public IP as the PPTP server IP, which is an incorrect configuration...
-
- When a WAN interface set for PPPoE is switched to any other type, it breaks it, as it leaves that interface assigned ...
-
- It's work. please update documentation
-
- Forward to me to take a look.
-
- Applied in changeset commit:"9a36dc9d241e004e7bcdec25def3b7b0c9d94cff".
-
- Another improvement was committed related to this.
It now considers gateways that are not marked as default in the GUI. -
10:54 AM Bug #1410: pfSense remains without default route
- Ermal Luçi wrote:
> A setup with multiple WANs can losse its default route when its gateway is marked as down from a... -
- Applied in changeset commit:"ab75b4ee5475fe1be718cb0e93d0a34f293c5ed0".
-
- I know for a fact this works without doing that, need more info.
-
- are these all 64 bit?
-
- Same problem here... With lastest snapshot update applied (pfSense-Full-Update-2.0-RC1-amd64-20110405-1827.tgz)
!k... -
- just a fact of the Intel driver, we don't include doc. You'll have to get it from a stock FreeBSD.
-
10:26 AM Bug #1419 (Rejected): Incorrect Intel License information in dmesg
- Running:
FreeBSD fw 8.1-RELEASE-p2 FreeBSD 8.1-RELEASE-p2 #1: Tue Apr 5 17:09:22 EDT 2011 sullrich@FreeBSD_8.0_pfS... -
- That may help with multi-wan, but doesn't help the case when there is only one WAN, or all WANs are down.
-
- will furnish with a screenshot since the VM is disabled at the moment. However what I have configured on the WAN inte...
-
- Show your pppoe configuration please
-
- Thanks committed.
-
- Hi,
With 2.0, it's impossible to make bsnmpd bind to LAN. It's very usefull when we want to access SNMP data from ... -
02:01 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- Rob Eckel wrote:
> I solved the problem that I was experiencing today. I noticed that the step of the connection th... -
- I solved the problem that I was experiencing today. I noticed that the step of the connection that it was stalling o...
04/05/2011
-
- yeah, dunno how to change the attributes... :) I'm talking about an installation inside kvm with 2.0 rc1.
-
- Hi
I wanted to use the "client specific overrides"-feature. But it didn't push the configuration until I put the f... -
- Just committed a fix for this.
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/262595f0d5756ad4411e3... -
09:22 AM Bug #1415: Nat reflection is installing rules with 'Array'
19001 dgram udp nowait/0 nobody /usr/bin/nc nc -u -w 2000 Array 25535
19002 dgram udp nowait/0 nobody /usr/bin/nc ...-
- This leads to 10K+ nc processes which never go away and at some point will exhaust your firewalls resources.
-
03:02 PM Bug #1107: mpd on AMD64 generates invalid checksums with NAT
- I tried this with the same result as before. Lowered the MTU on the OpenVPN interface to match the MTU of the PPTP in...
-
- It works for me on the most recent snapshot with fresh rrd files. Try to rm /var/db/rrd/* and press save on the RRD s...
-
10:12 AM Bug #1416 (Rejected): RRD failures for Traffic and Packets graphs
- None of the Traffic and Packet graphs work on my ALIX.2D3 systems for the latest builds. Here's a sample output for a...
-
08:18 AM Bug #1414 (Closed): dhclient fail on wifi
- If using dhcp on a wifi interface dhclient fails because it is executed before wpa_supplicant is finished configureri...
-
06:08 AM Feature #1411: Gateway Group as default gateway
- I could see use for this too.
-
05:28 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- Hi,
Tested again , tried many different situations. They all have the same problem.
It's definitely a routing/fil... -
03:57 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- One thing that is different in my setup is that the other end is racoon as well, not shrewsoft client. With the racoo...
-
- ISP uses VLAN 500 to provide VDSL2 connectivity through a Huawei HG655A BTU. VLAN tagging is done on a separate Mikro...
04/04/2011
-
09:23 PM Bug #1347: ntpd not starting
- The script /usr/local/sbin/ntpdate_sync_once.sh is looping until the initial synchro with ntpdate is sucessfull. Once...
-
03:42 PM Bug #1401: VLANs and Web settings "TCP Segmentation Offload"
- I´m on a bussiness trip and can check that first on Friday... Sorry.
-
- Can you please verify that after saving the new options under system->advanced for disabling TSO and than going to th...
-
- Changing back to new. I have a configuration file here that will utterly wreack havoc if someone wants to take a lo...
-
11:01 AM Bug #1412 (Resolved): Assign a user the "WebCfg - System: User Manager Page" does'nt allow access
- When trying to add to a blank user the following rights :
WebCfg - System: User Manager page
WebCfg - System: Us... -
- Seems like a pretty bad bug if you checked the option to ignore the DNS servers and yet they get static routes. I'd p...
-
- This is caused by the dhclient script.
I do not think this should be fixed for 2.0 as this has been the behavior unt... -
- Can you try a snapshot from tomorrow.
I fixed #1410 and that would fix this as well. -
- On step3 you just enable the interface and leave it as type none.
That will make your GRE work. -
- Hi,
can i propose the feature in subject?
Now if the default gateway go down pfsense arent able to download the p... -
- This seems like a hardware problem.
Either motherboard or your harddisk controller! -
05:44 AM Bug #1342: kernel crash with RC1 on vmware
Here is a backtrace screenshot.
I don't know if it helps you...
-
- A setup with multiple WANs can losse its default route when its gateway is marked as down from apinger.
This results...
04/03/2011
-
+1 for this not working.
I have a bridged interface (one WLAN and one LAN) but tried it without the bridged inte...-
- duplicate
-
10:17 AM Bug #1409 (Rejected): Open VM Tools install error
- Beginning package installation for Open-VM-Tools...
Downloading package configuration file... done.
Saving updated ... -
- Packages cannot be used from the LiveCD, and there is no way to support them while running from the LiveCD. Adding pa...
-
09:53 AM Bug #373: Package Manager not available in menus
I'm running version 1.2.3-RELEASE and no option in the system menu to add packages either. If it's related to runn...
04/02/2011
-
- after full configuration of pfSense including all wan (4 interfaces)and all lan interfaces (3 interfaces) i started t...
-
- If you have hardcoded DNS servers and _uncheck_ "Allow DNS server list to be overridden by DHCP/PPP on WAN", DNS serv...
-
- If you don't have functional DNS, the GUI can be extremely sluggish.
Common scenario to reproduce:
* Multi-WAN se... -
- Hi,
I have altered the Racoon.conf with the solution Andy Giles suggested. But no luck unfotunally.
altered the s... -
- The new version has updated drivers for LCD Panels (many patches to the existing ones and new drivers added).
The f... -
- Since Floating Rules can apply to different interfaces, it would be useful if in the list this information was visibl...
-
- it'll automatically be available when that version of FreeBSD is a stable release and we put out a release based on i...
-
01:59 AM Feature #1404 (Closed): Broadcom 10GbE bxe Driver
- It looks like the Broadcom 10GbE driver (BCM57710/BCM57711) is now out. It would be great to have it included in pfSe...
04/01/2011
-
- Thanks,
I will try this solution.
report to you if it also fixes this problem. -
- PLease provide logs or screenshots and part of your interfaces config.
It should work and is 80% finished i would sa...
03/31/2011
-
11:26 PM Bug #1336: PPTP VPN NAT on WAN or other external interface
- Yes,I also encountered the same problem.
My Test environment Attachment Page1.jpg
1. Wan2 Rules: Open WAN2 Port G... -
- jeje yes and I am testing with it, actually it works!. I know is not finished yet but meanwhile I think is better to ...
-
- was QinQ ever finished? Maybe should be hidden until a later release.
-
- Hello,
When creating a QinQ interface it works fine but the configuration stop working until reboot. The system te... -
- Topic says it all.
Some investigation is needed to find the cause. -
- Error is :
Downloading http://files.pfsense.org/packages/8/All/icu-4.6.1.tbz ... could not download from there or... -
- Problem exists in Snapshot :
2.0-RC1 (i386)
built on Wed Mar 30 23:56:33 EDT 2011
03/30/2011
-
- Version:
2.0-RC1 (i386)
built on Tue Mar 29 13:39:02 EDT 2011
Desc:
I got tree diferent VLANs (1,2,3) on my ... -
- Just for reference the commit https://rcs.pfsense.org/projects/pfsense-packages/repos/mainline/commits/b5b95ddb8bde31...
-
-
- pfflowd was using custom_add_php_command rather than custom_php_resync_config_command which is used for synching the ...
-
- Some packages require saving twice for the changes to actually apply, or to launch initially. pfflowd is one example,...
-
- This has been showing up on a number of systems recently. ...
-
- duplicate of #1397
-
- Hi folks,
I installed a fresh copy of your pfSense 2.0 RC1 image. A few days later I got some alerts on my BIND se... -
- Duplicate of #1398. Clicked too fast.
-
- Hi folks,
I installed a fresh copy of your pfSense 2.0 RC1 image. A few days later I got some alerts on my BIND se... -
- That is not a problem with the images. If they work, it's probably not an issue. If they don't work, it's probably so...
-
- using linux to create usb drive
sudo zcat pfSense-2.0-RC1-4g-i386-20110329-1413-nanobsd.img.gz | sudo dd of=/dev/sdd... -
12:20 PM Bug #1395 (Resolved): RRD data not collecting accurate information
- I noticed that after switching over our IPSEC tunnels over to pfSense 2.0 RC1 that there was a strange spike in outbo...
-
- I have also seen this issue alongside the problem of not being able to connect more than 1 mobile client.
See http... -
- I agree with Erik that it's misleading when the package manager reports "Service is started". I had installed bandwid...
03/29/2011
-
10:17 PM Bug #1394 (Resolved): MTU does not reset
- Version Info:
2.0-RC1 (amd64)
built on Sat Mar 26 00:18:39 EDT 2011
Steps to reproduce:
1. Go to Interfaces ->... -
05:17 PM
pfSense Packages
Bug #1385: Open-VM-Tools not working anymore
- the pkg_config.8.cml changes were now pushed to git, please ignore the message before...
-
- We need to fix the automated build process, not upload new binaries.
-
05:12 PM
pfSense Packages
Bug #1385: Open-VM-Tools not working anymore
- please add this to pkg_config.8.xml as i cannot commit now :-(
<package>
<name>Open-VM-Tools</name>
<descr>... -
04:58 PM
pfSense Packages
Bug #1385: Open-VM-Tools not working anymore
- it's build for http://files.pfsense.org/packages/8/All
it's the x86 build -
04:55 PM
pfSense Packages
Bug #1385: Open-VM-Tools not working anymore
- the following packages can be found at http://pfsense.trendchiller.com/packages/
fusefs-kmod-0.3.9.p1.20080208_7.t... -
- Yes you can override it but those who upgrade need the exact same functionality they had before without changing anyt...
-
- Well in 1.2.3 you could not override these settings at all while on 2.0 you can!
I do not think the setting is neces... -
- $config['system']['disablevpnrules'] in 1.2.3 disabled the auto-added WAN rules for IPsec and PPTP (and tun rules for...
-
- Regarding this thread(http://forum.pfsense.org/index.php/topic,34135.0.html) racoon needs to be patched to allow XAut...
-
03:30 PM Bug #1318: Certificate error: certificate subject does not match signing request subject
- I can also confirm this issue.
2.0-RC1 (i386)
built on Mon Mar 28 16:09:59 EDT 2011
The CSR (included) was ... -
03:27 PM Feature #1392 (Rejected): XMPP (Jabber) Notifications/Alerts
- Would be great to have an option in the GUI, to send notifications to an XMPP account. Then you can receive messages ...
-
- There was no IPsec mobile client upgrade code at all. I committed some with commit:49bb5c0 and it seems to work prope...
-
- Ok, I will configure again and see what happens. I am pretty sure that I configured bandwidthd. In any case, the wi...
-
- thanks
-
02:09 AM Bug #1317: Voucher database synchronization
- Hi,
this can be closed. It is working now.
Thnx a lot
stefan
03/28/2011
-
05:55 PM pfSense Packages Bug #1390 (Resolved): pfflowd amd64 binary missing
- since the v0.8 pfflowd upgrade, the amd64 binary is missing
-
- you have to configure them before they will start. This isn't specific enough to be a legit bug report, please see
h... -
- Version Info:
2.0-RC1 (amd64)
built on Sat Mar 26 00:18:39 EDT 2011
I installed bandwidthd (version 2.0.1.2), d... -
11:06 AM Feature #1388 (New): 3G outbound failover connection with auto dial-up and hang-up
- I would like to see implemented a feature to use an USB 3G modems as a failover (not balancing) dial-up connection (*...
-
07:53 AM Bug #1243: GUI/Backend code needs updated after multi-PPPoE-server code switch
- FWIW, the /etc/inc/filter.inc portion of Vinícius Coque's patch fixes my problem of PPPOE rules not being created for...
-
- I can't tell. My system log is entirely saturated with "ipfw-classifyd: unable to write to divert socket: No buffer s...
-
- Do you have on your logs any information as 'identified proto(http)' ?
-
- Using 2.0-RC1 (i386) built on Mon Mar 28 00:15:15 EDT 2011, and the error message is now gone (thanks!), but I am sti...
-
- No you do not assign GRE as OPT7 but you assign GRE as OPT8 or more :)
-
- I am having the same issue. I tried to use a register.com SSL cert, which has intermediate CAs. Upon getting the ce...
03/27/2011
-
- Duplicate of #1243
-
- Hi, I'm running pfsense 2.0-RC1.
* I have 3 interfaces (LAN (em2) - 10.1.1.192/26, WAN (em0) - 10.1.1.56 and DMZ (... -
09:19 AM Bug #1386 (Resolved): Nested port aliases causes "Unknown port" error upon loading filters
- I'm trying to create nested port aliases in PFSense 2.0.
I created an Alias "R_Webserver", type "Ports", (role: we... -
- I did as you explained:
1. Create new Interface (OPT7) assigned to non assigned interface (em1)
2. configure static... -
03:12 AM Bug #1327: RFC 2136 dynamic dns bug
- To further clarify, please update "host" field of the GUI for RFC 2136 updates to read "Fully qualified hostname of t...
-
- I was able to get updates to work by putting the complete FQDN into the hostname portion. ex. host.example.com rather...
-
- I have the same issue as originally described. I'm currently running:
2.0-RC1 (i386)
built on Thu Mar 24 22:33...
03/26/2011
-
- Applied in changeset commit:"63e18082bb98d51763e542d5c4094793b300eb60".
03/25/2011
-
10:38 PM Bug #1377: upgrade 1.2.3-Final nanobsd 4g to 2.0-RC1 nanobsd 4gb fails
- ...
-
- ran the following command in the console and tried upgrading to the 2.0 nanobsd 4gb rc1
tail -f /cf/conf/upgrade_... -
- Latest snapshot should have this ok now.
-
- you do:
- create interface
- create GRE
- assign GRE as an interface but not replacing its parent inteface assignm... -
09:46 AM
Bug #1384: no privileges can be assigned for IPSec dialin in the user-manager
- sorry, my fault... did not see 1202 somehow ;-)
-
- Duplicate of #1202
-
05:00 AM
Bug #1384 (Closed): no privileges can be assigned for IPSec dialin in the user-manager
- no privileges that can be assigned for IPSec dialin in the user-manager
[http://forum.pfsense.org/index.php/topic,... -
09:05 AM
pfSense Packages
Bug #1385 (Resolved): Open-VM-Tools not working anymore
- somehow the Open-VM-Tools for 2.0 are messed up
_./vmware-guestd.sh start_
Starting vmware_guestd.
/libexec/ld-e... -
- I committed that patch and fixed the error above which was accidental breakage by me.
So try latest snapshot with th...
03/24/2011
-
- net45xx isn't supported hardware, only 64 MB RAM.
-
- the problem I saw was only out of disk space on /, /cf was fine.
-
- Need to check the free space on /cf and / before upgrades. If there is not enough free space then cancel upgrade a...
-
02:18 PM pfSense Packages Bug #1244 (Resolved): apache_mod_security_package missing mod_proxy.so (and perhaps others)
- fixed the dependencies of apache with amd64
-
02:11 PM Bug #1365 (Resolved): RRD is not gathering CPU statistics
-
- Thank you! Works, cpustats is present now.
-
-
- Duplicate of http://redmine.pfsense.org/issues/636
-
- So, first i create Interface, then i create GRE Tunnel and after that i change the interface assignment from some thi...
-
-
- Well there is some validation missing in the GUI it seems.
You cannot create the gre and after create the interface f... -
- Here is the post discussing this further
http://forum.pfsense.org/index.php/topic,34687.0.html -
- The problem with this is that apinger will bind to the same address and has no idea that the monitoring host is down ...
-
- Using 2.0-RC1 (i386) built on Wed Mar 23 20:46:01 EDT 2011, I get the following error when I set one of my LAN rules ...
03/23/2011
-
09:43 PM pfSense Packages Bug #1363: Spamd not updating pf tables
- Erik, I was using 2.0RC1 and today I just updated the system to the last snapshot. Then, I removed spamd package and ...
-
01:13 AM pfSense Packages Bug #1363: Spamd not updating pf tables
- It might be fixed now. Reinstall the package and try again.
-
- Attached screenshots and config.xml no related log entries
-
- I am sorry but you ahve to be more specific than that.
Provide screenshot or your config.xml and a better descriptio... -
- After create of GRE tunnel and assign it to newly created interface with correct IP, IP is assigned only after reboot.
-
- rules work, aside from the scenario in #1360
-
03:31 PM Bug #1382 (Rejected): PPTP rule not added
- Hello.
Testing the latest snapshot I had problems connecting to PPTP server.
I did a netstat and 1723 was there l... -
- I have the same problem. I migrated from 1.2.3.
<pptpd>
<redir/>
<localip>172.16.99.1</localip>
<remoteip... -
-
- It's ok now. I can create pipes and queues. Still need to do more test to see how it works.
Thank you. -
- That you. Will test this soon and report results.
-
- Should be fixed in the next snap, it was missing from the build. I have just committed the change, so please let me k...
-
- Still no fix for this. Maybe just put top back.
-
05:43 AM Bug #836: Captive portal logout popup windows doesn't disconnect the user
- I am still having this issue with 2.0RC1 snapshots (latest update 23.03.2011).
-
- As described here:
http://forum.pfsense.org/index.php/topic,34659.msg179973.html
NAT reflection of DNS, probably ... -
- NMap and Avahi appear to cause the error 500 even if installed through the web GUI after the system has fully booted....
03/22/2011
-
10:02 PM Bug #636: layer7 not work correctly
- So, same build...
Applied the first 2 changes in your code there, the 3rd seemed to have already been applied in m... -
- Hi there,
I tested it with 2.0-RC1 (i386)
built on Tue Mar 22 16:13:31 EDT 2011
Did a restart and got this er... -
- I committed even more fixes at this which should allow for it to function correctly.
-
04:44 PM Bug #1049: After reinstalling packages at bootup, WebUI not accessable (NanoBSD)
- Same packages as before. Backup, NMAP, Avahi and RRD Summary. When a package is installed I get the following on the ...
-
- Can you be more verbose:
- What packages you installed?
- Any pertaining log? -
- It worked a long time now. Today I updated to the latest snap and now I get the 500 error again, when accessing the W...
-
- static routes work for dnsmasq and all other services in all versions.
http://doc.pfsense.org/index.php/Why_can%27t... -
01:59 PM Bug #1312: NAT reflection/DNS Forwarder broken again
- Can you pls provide information on how to log for NAT reflection.
Then I will setup a basic pfsense config with no... -
-
- This is not something I'm able to reproduce with my own configuration - works fine here, so I'm going to need more de...
-
- I tried the image pfSense-2.0-RC1-4g-i386-20110226-1633-nanobsd-upgrade.img.gz through the WebGUI and the following i...
-
- Check the latest image and see if this has been fixed.
-
- I know this bug is marked as complete but I just ran into this problem using the alias name of "all". With a 2.0 RC1...
-
05:53 AM Bug #1348 (Resolved): Multiple static routes that use the same next hop cause apinger issues
-
- This is a major issue for us, and we'd be happy to contribute funds to getting this re-worked. Shaping that only work...
-
- Applied in changeset commit:"548be1fd6697ab115cbb29d61bc5507744488094".
Also available in: Atom