Activity
From 06/18/2013 to 07/17/2013
07/17/2013
-
01:55 PM Bug #2484 (Resolved): Serial console speed has no effect on NanoBSD
-
- This resolved itself once the proper rules were open to all.
-
- This was added a couple weeks ago.
-
- Needs info on how to reproduce it before anything can be done.
-
- Duplicate of #1351 (which has since been fixed)
-
- This was fixed a while back, the directory has snapshots in it now.
-
11:12 AM Feature #2989 (Resolved): Changing language english to turkish not effect
-
09:56 AM Bug #3095 (Resolved): Name column uses old (original) interface name
- Name column uses old/original interface name (OPT1 in my case) when the interface has been renamed. The interface nam...
-
- Applied in changeset commit:298020b2b6efa75c863bafef9a078c285a2b9ed6.
-
- Applied in changeset commit:a5cd1c5a4286062b84caf32df860f2e2f2e204aa.
-
- Duplicate of #2227
-
05:44 AM Bug #3094 (Rejected): LDAP authentication, password with non-standard letters
- Hello,
I've been using LDAP authentication server for logging to pfSense webinterface for over a year now and everyt... -
01:36 AM pfSense Packages Bug #3093: squid3-dev missing libgssapi.so.10
- Possibly the AUTH_KERB compile time option should be removed or /usr/ports/security/krb5 built or Kerberos added to b...
-
12:31 AM pfSense Packages Bug #3093 (Closed): squid3-dev missing libgssapi.so.10
- On current snapshots (2.1-RC0 (amd64) built on Tue Jul 16 16:31:05 EDT 2013 FreeBSD 8.3-RELEASE-p8), the squid3-dev p...
07/16/2013
-
06:24 PM Bug #2882: 6RD not working in latest snapshots
- Hi ermal,
I fired up my July 12th pfsense vm and "6RD IPv4 Prefix length" only goes from 0 to 31 bits.
netstat ... -
- Hi ermal,
Charter specifies the following setting for their 6RD service:
6rd Prefix = 2602:100::/32
Bo... -
03:30 PM Bug #2882: 6RD not working in latest snapshots
- I think you should set your prefix to /64 in your wan configuration hence the problems.
Also the netstat command i... -
- Hi ermal,
Here is the requested command output:
http://pastebin.com/e7QrYfzG
And here are the config.xml sec... -
- Not fixed yet
-
- It should be better on last snapshots
-
- Not fixed yet.
-
- Please check tomorrow's snapshot
-
- Applied in changeset commit:8a0c14c3e44b3ccf79db2dec4e836a6ca6367f75.
-
- Applied in changeset commit:1c8faa89b9aab2d7ab7aef9837d9c9e436ada9c7.
-
- It's not related to this issue, if you still have a problem please open a ticket for it.
07/15/2013
-
07:00 AM Feature #701: Interface groups with NAT
- can this be implemented like under NAT port forward page u select the interface group and the pfsense creates same ru...
-
03:40 AM Bug #1047: Disable TSO, hardware checksum don't work for unassigned but active interfaces
- please reopen this bug
07/14/2013
-
- i have the problem on pfsense 2.1 RC0 latest snapshot
-
- the bug is not fixed. i have same problem with Intel X540-T2 and X520-DA cards. attached my configuration and output ...
-
- Duplicate of #1047. Comment there if it's not fixed.
-
- i found workaround using shellcmd package. i just run ifconfig ix(0-3) -lro using shellcmd, but i don't think that it...
-
- Hello,
i have firewall with 2 dual-port Intel 10G NICs, one X520 DA2 and one X540-T2. i checked disable LRO in web...
07/13/2013
-
01:03 PM Feature #1663: DHCPv6 relay
- Grrr, missed one part of the patch... All works now:
- service started on boot
- Pv6 addresses assigned
- the enab... -
- Afraid the thing still does not get stopped with 711.
-
11:34 AM Feature #1663: DHCPv6 relay
- Starting at boot is resolved by https://github.com/pfsense/pfsense/pull/710
Stop/start/restart and enable/disable of... -
01:02 PM Bug #3075: Can't delete unused Virtual IP "referenced by a least one gateway"
- Sent to forum on 9th July
http://forum.pfsense.org/index.php/topic,64326.0.html
I have just updated to the latest... -
- Applied in changeset commit:63b8c4db3bebb0e203dd6903f310ca87ef3e8061.
-
- Applied in changeset commit:45eb8aeb5839b52af9f9e82cecdc5ed5579656f5.
-
06:57 AM Bug #3091 (Resolved): Bad variable assignment in apinger setup (gwlb.inc)? Not sure the fix
- About line 179 gwlb.inc:...
-
07:52 AM Todo #2942: PHP-Growl: Growl Talk Notifications UDP 9887 implementation deprecated. GNTP is the new standard notification protocol.
- Devs,
I know this isn't a core feature or functionality but with the research and solutions proposed, I'd apprecia... -
- Well guys, I got another panic when messing with FTP downloads from ftp://ftp-archive.freebsd.org/. (No serial consol...
07/12/2013
-
- Sadly, I keep hitting this with http://snapshots.pfsense.org:...
07/11/2013
-
- Weird... when the poor little thing really gets abused too heavily and runs out of RAM, I get php killed in system lo...
-
- For the record, it seems to be that when an ALIX is starved for RAM, somehow globals start disappearing unless they'r...
-
- Fixed by...
-
- > Once a cert is added to the CRL, the reason column is filled in.
Negative, Captain :-)
!http://i40.tinypic.co... -
- Tried it on a VM full install and ALIX both on a current snapshot, reason drop-down is always filled in for me.
-
- Is there a forum thread for this?
It works fine for me. Once a cert is added to the CRL, the reason column is filled... -
- As per subject.
!http://i40.tinypic.com/k0ndyu.png! -
-
- > Of course the best fix is to not stick spaces in a CN. :-)
Kinda troublesome when you already have tens and tens... -
- Of course the best fix is to not stick spaces in a CN. :-)
-
- Applied in changeset commit:2916a9051a4e60c64ecd2732b652a12696d3295e.
-
- This is still broken even with latest version.
-
- Please post in the forum for assistance in diagnosing the issue before opening a bug report. There isn't nearly enoug...
-
08:55 AM pfSense Packages Bug #3088 (Rejected): Squid log rotate
- After a system boot, squid don't suceed to rotate logs, so I need stop and restart squid to enable log rotate
-
02:00 AM Feature #3007: "protocol" field in rules does not support selection of protocol 41 (used by GIF tunnels)
- Applied in changeset commit:26f80aff92ea3f70301273d869d30c68d4b73d48.
07/10/2013
-
06:14 PM Feature #3087 (New): Setup Wizard does not include IPv6 options for interfaces
- The wizard which runs during the first login to the web-gui does not give options for configuring IPv6 on the LAN or ...
-
03:00 PM Bug #3086 (Rejected): OpenVPN tunnel traffic shaping
- config issue, not a bug
-
02:55 PM Bug #3086 (Rejected): OpenVPN tunnel traffic shaping
- I used pfsense to link two remote networks via openvpn. The tunnel will be used to encrypt VOIP between the two netwo...
-
- Also, the service does not start on boot, since there is no mention of services_dhcrelay6_configure() in /etc/rc.bootup
-
12:52 PM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- The problem is still there, but now I have noticed an additional behavior. I have taken the liberty to email you some...
-
-
- This seems the same root cause as #2910
-
- Since this works for RFC2136 and he.net now, we can set it to partially done, but not completely done. (Redmine autom...
-
- Applied in changeset commit:4624f50fce5f1f41306d6852ca2922079b9d1694.
-
- Checkboxes for logging were added yesterday in commit:a19fcb824c8d443cafa42f7d826407e475f40fa8
Moving to "real" ru... -
08:53 AM Feature #371: Allow moving of bogon and RFC 1918 rules
- I'd have to agree with what Doktor Notor wrote above, and I'd rather strongly agree: this takes hours and hours to tr...
-
08:34 AM pfSense Packages Bug #3085 (Resolved): squidguard: problems when importing a blacklist archive containing soft-links
- I'm sure it's a quick-solved issue :
when importing a blacklist.tar.gz containing soft-links, the links are lost in...
07/09/2013
-
- > Please do not use redmine as a bug tracking.
Call me confused. Isn't bug tracking the whole purpose of issue tra... -
03:27 PM Bug #3083: Firewall rule toggle fails after several enable/disable cycles : 2.1 RC0 and 2.0.3 release
- Jim P wrote:
> That page shows the status of the _previous_ filter reload. If it was successful, it will say so.
> ... -
- That page shows the status of the _previous_ filter reload. If it was successful, it will say so.
Pressing the butto... -
- > Also, where is it stated that to reload the filter set after a rule change the user must navigate to this page and ...
-
- Doktor Notor wrote:
> Uhm... what do you mean by "manually"? Without clicking the button, the filter does not reload... -
- > I then did "Status->Filter Reload" but this time I clicked on the "Reload Filter" button manually. Bingo. The rules...
-
- Jim P wrote:
> Rather than doing a rule save, reboot, etc, wait a few moments and go to Status > Filter Reload, and ... -
- Jim P wrote:
> If you trigger too many filter reloads too fast it's possible that check_reload_status is eating the ... -
- If you trigger too many filter reloads too fast it's possible that check_reload_status is eating the reload events be...
-
- Chris Buechler wrote:
> not true. Has to be states. Maybe that in combination with something delaying your filter re... -
- not true. Has to be states. Maybe that in combination with something delaying your filter reload enough that a new st...
-
- Please see the description in my forum post for more details:
http://forum.pfsense.org/index.php/topic,64098.0.html
... -
- I added an option for this in commit:850324a23e45b3a11231f910290f8ff9b774d9bc a few weeks ago, forgot the ticket exis...
-
- Would you mind merging this into RELENG_2_1 as well?
-
08:56 AM Bug #3084: bsnmpd stopped working when openvpn is activated
- just saw this in my log files maybe it will help
@
Jul 9 15:54:47 php: rc.newwanip: pfSense package system has de... -
- hi,
when i activate openvpn my bsnmpd service stop working after 10 minutes or less ....
I always have to start i... -
- Still crashes easily.
I can reproduce it on a VM very easily. I have two test VMs with an OpenVPN tunnel in betwee... -
- Could you confirm if the problem persists on more recent snapshots?
-
-
-
-
-
-
-
-
- this log is only cosmetic, and already has a ticket. the other description is unrelated and not a known problem, but ...
-
12:54 AM Bug #3082: apinger: Error while feeding rrdtool: Broken pipe
- OK, it looks like a problem with Chrome.
We don't have the problem with IE, pretty weird.
Service -> Load Balancer ... -
- Tried restarted webconfigurator to no avail
Also rebooted the pfsense but problem still persist?? -
- Hello,
looks like the bug on rrdtool from 2.0.2 is still present in 2.0.3
Interface froze when choosing Services-...
07/08/2013
-
- Applied in changeset commit:e91abcc96e79808b71865d3e91c81ad5501328c3.
-
- Applied in changeset commit:63e9efc92f4eba3a74fcf98ee858b35261d394e0.
-
- my FW run pfsense 2.0.3 amd64
-
- Hi,
i have following setup:
em0 - 2 WAN interfaces (vlan 11,12) that receive IP using DHCP from ADSL modem. after... -
11:43 AM Bug #3062: Captive Portal NOT re-using PIPENO
- I have put a fix for this part in github *_"There is still a problem, I mean delete the file captiveportaldn.rules Wh...
-
09:35 AM Bug #2495: pfsense doesn't seem to know what its WAN IP is
- That bug is NOT fixed yet.
It still exists on 2.1-RC0 from "Sun Jul 7 20:34:30"
Please tell me if I can support you. -
08:12 AM Feature #1831: Captive portal IPv6 support
- Great work, and Thanks Cyrill.
Unfortunately I found another bug in the code, while setting up the CP for v6 in my... -
- Please do not use redmine as a bug tracking.
There is already a ticket open for ftp helper.
I pushed some patches... -
03:03 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- IPSec with mobile clients on Current 2.1 RC's seems very reliable - various user reports are very positive. Thanks.
-
- Applied in changeset commit:8418a6df61356f93f95b2a1a6b8e0a9c02890088.
-
- Applied in changeset commit:25ce513631d4f1af53886982b0b7c7872e8b8edf.
07/07/2013
-
- Pull request here: https://github.com/pfsense/pfsense/pull/704
-
- Turns out the official name for protocol 41 is "IPV6".
-
05:15 PM Bug #3080 (Resolved): 2.1-RC0 (i386) - GRE Interface not getting correct/configured MTU at boot time
- I'm having a working GREoverIPSec + OSPF environment (Cisco C876 <-> pfSense). Today I just saw that a GRE interface ...
-
- Pull requests here: https://github.com/pfsense/pfsense/pull/703
-
- Applied in changeset commit:fc654f2c36186af8aaf59a1feedce5b343df1252.
-
03:50 PM
Bug #3028: Prefix delegation fails to add rules for dhcp6 traffic on tracking (LAN) interface
- Applied in changeset commit:d7fb1715a17566f1bd9013f88fd9b627479d8767.
-
- Applied in changeset commit:14e9b0526f4d41616994d57b3484c2fa0bf8183f.
-
- The existing statement causes the 'track6-interface' entry to never be added to _FilterIfList_, which in turn causes ...
-
- I believe the problem is in /etc/inc/filter.inc:870:...
-
- the current backup/restore mechanisms do not allow for the individual backup/restore of DHCPv6 settings.
They are... -
- Applied in changeset commit:ba581f076acc3068c37bd86c97656bf53b29781b.
-
- Applied in changeset commit:6efe0caeb3b2ec8ae39ce35aa0663ffa7501a146.
-
10:30 AM Bug #3078: NanoBSD upgrade gui confusing!
- Jim P wrote:
> I updated my ALIX and it correctly shows on the dashboard and the auto update check that it is curren... -
- I updated my ALIX and it correctly shows on the dashboard and the auto update check that it is current. The update ch...
-
- GT Zenny wrote:
> Also it would be nice to include the changelog of every build to save the life of the CF/USB devic... -
- I think this needs to be fixed to avoid confusion whether an upgrade has been made or not.
http://forum.pfsense.or... -
- As discussed on a forum thread http://forum.pfsense.org/index.php/topic,64144.0.html the patches introduced in commit...
07/06/2013
-
04:16 PM Bug #3075: Can't delete unused Virtual IP "referenced by a least one gateway"
- Thanks Renato!
-
- The fix for #2962 introduced this issue. I fixed it, please check tomorrow's snapshot.
-
- I'm not sure that I'm following you. Let's say my block of public IPs is as follows:
1.1.1.30 (gateway)
1.1.1.29
... -
- that input validation should only apply when it's the only VIP that exists in that gateway's subnet.
-
-
12:18 AM Bug #3057: DHCPv6 not working with Router Advertisements 'Assisted'
- Yes, now it's working without having to update services.inc from git.
-
10:26 AM Feature #3076: Gogoc client support
- Chris Buechler wrote:
> there are many supported tunneling offerings already that work fine with ISPs that don't sup... -
- there are many supported tunneling offerings already that work fine with ISPs that don't support or block v6.
-
- This is so extremely slow and unreliable service that I'd say this is a complete waste of time. Been using it for qui...
-
- Some ISP networks completely blocked the IPv6 protocol, so it would be good to have a different and a simple way to c...
07/05/2013
-
- I am working on some minor shuffling around of statics from my /29 block of IPs from my ISP. On 2.0.3 and 2.1 snapsho...
-
- Was the expected result of this revision to prevent the deletion of Virtual IPs that also exist in the same subnet as...
-
- It was pushed on master and not on RELENG_2_1, because of that you cannot see the change on 2.1-RC0 snapshots. I appl...
-
- And also with
2.1-RC0 (i386)
built on Fri Jul 5 06:53:51 EDT 2013
FreeBSD 8.3-RELEASE-p8
I need to get ser... -
- This worked, but on build
Version 2.1-RC0 (i386)
built on Thu Jul 4 03:04:00 EDT 2013
FreeBSD 8.3-RELEASE-p8
... -
- FWIW, tried with @truss /usr/sbin/traceroute6 -w 2 -m 18 www.google.com@ - it looks like it *does* actually make it t...
-
- Looks like the code was last touched (beyond irrelevant cosmetics) almost 4 years ago. Unlikely to have any fix.
-
- MTR is an entirely different type of test. Useful, but probably not one we'd include by default. And yes its GUI does...
-
- Hmmm well, not sure either, beyond either a shiny red warning (think about remotely managed boxes, cutting yourself o...
-
- I was able to reproduce it finally. I tried it on a few different pfSense boxes and FreeBSD systems, and I only could...
-
- BTW, installed mtr-nox11, no such issue:
HOST: gw.example.com Loss% Snt Last Avg Best Wrst S... -
- Not really required to uncomment anything there. It's endlessly visible in the process listing from console, till you...
-
- I can't reproduce this on current 2.1 code.
In the GUI we pass "-w 2" which waits a max of two seconds for a reply... -
- Applied in changeset commit:4454f1f34841b07c2f8e5aa95b3e0d9a9e0ed9a2.
-
- Applied in changeset commit:b877d6351c614f58b68a3ab2c7b04ea7ea282961.
-
- Please, revert these patches ASAP. They hard crash the box with FTP! http://forum.pfsense.org/index.php/topic,64144.0...
-
- This should behave better with tomorrow snapshot due to a fix done in gateway monitoring.
Can you confirm this is th... -
- Applied in changeset commit:0ee96a458ab93ff451c9bb32b1b8bc20e13866e6.
-
- Applied in changeset commit:86573a248608ff5b166eb77e962f97e91df159d2.
-
- All good now... thumbs up! :) Proper rules generated and DHCPv6 traffic no longer blocked on ifaces with relay enable...
-
- The attached patch should fix it, but it would be better to test it before committing. Let us know if it helps.
-
- Related forum thread: http://forum.pfsense.org/index.php/topic,64168.0.html
-
- Looking at this part of filter.inc, I don't think it deals with this configuration correctly.
@
if ((is_array... -
09:18 AM Bug #1629: invalid state table entries after WAN IP change
- I am also affected by this bug in 2.0.3.
In my case not a changed ipadres on my WAN, but a dual Wan setup with failo... -
- Related forum thread: http://forum.pfsense.org/index.php/topic,64168.0.html
-
- This is very, very broken. It can never be stopped via disabling the checkbox and clicking save. On subsequent enabli...
-
07:20 AM
Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- Glad to report that the firmware update I just installed (details below) seems to work.
Will continue to monitor ... -
- Jun 4 snapshots are even better for this.
-
- Applied in changeset commit:265be6f5ab7d5546a8f26ae6bcae33712f861102.
-
- I pushed some fixes for this.
On newer snapshots it should behave as expected. -
- Applied in changeset commit:63356262a7f3f82b97d029d983fff0132030e539.
-
- Applied in changeset commit:f4a8e38c6ed250e9a18c4e472481541198231cdb.
-
- The only option for now seems to create rules with allow-option advanced setting set.
-
- You can touch /etc/php_dynamodules/module_name and rc.php_ini_setup will pick up on it and load the module (if the mo...
07/04/2013
-
- it's already there
-
- This is not a bug, sorry for the mistake.
-
- Would be too much to ask to include the php mysql extension by default in the next snapshoots? I use a custom authent...
-
12:11 PM Bug #2762: PF drops IPv6 packets with fragment header followed by a last fragment only
- PS: It is not broken or weird behaviour (according to the RFCs). RFC 6145 (translating IPv4 <-> IPv6) specifies:
<... -
- Hrm seems it should work by default as i was brought to attention.
You sure it asks for interface assignment during b... -
09:37 AM Feature #3070: ova image wan configuration
- locally I could do it. True. The point is that I'm trying daily to download a snapshot from your snapshot server, run...
-
- You can just modify the default config.xml in the repository and that will give you that.
I do not think this will g... -
- Hi,
there is any possibility to generate the ova image with the WAN already configured to em0? I'm writing Cucumbe... -
- today I tried to download the last ova snapshot and looks like the virtualization folder is empty
http://snapshot... -
- While at it, it would be really useful to include /etc/version.lastcommit directly in the snapshots filename.
-
- Hi, to do test automation, it would be great to have on your snapshot server a link to the last build version. Today ...
07/03/2013
-
- As simple as trying to run IPv6 traceroute to www.google.com from the GUI:
@ 2 gige-g2-20.core1.prg1.he.net 3.31... -
- thanks!
-
- You can provide a patch and it will be evaluated!
-
08:36 AM Feature #3068 (Needs Patch): Notifications/Alerts - custom script
- Would be great to have an option in the notifications to execute a custom script.
-
- Please test with latest gitsync or tomorrow snapshots.
There were some fixes doen related to this as well. -
07:25 AM Bug #2878: radvd does not restart properly
- Tom M wrote:
> I am still seeing this issue. I have turned off Track Interface for DHCP on my LAN Interface and ipv6... -
- Not an easy one for 2.1
-
- Merging of the patch has been done.
Thank you. -
- not a bug, VIPs aren't always necessary for 1:1 NAT so they can't be prohibited from being removed because of 1:1 NAT...
07/02/2013
-
- Can we please do something about this? Or make a checkbox for logging (http://forum.pfsense.org/index.php/topic,34436...
-
09:27 PM Bug #3001: Captive portal Voucher sync on HTTPS with custom port
- Captive portal log also shows successful sync.
-
- Ok, I have tested this and it works properly. I've setup two VM's with three interfaces each. WAN (192.168.17.0/24), ...
-
- Alberto, it will be much easier if you put the changes in GitHub. Then the developers can easily see the differences,...
-
- Only correct a sentence, I meant that I hope will serve out the modification, instead of "I hope you learn the contri...
-
- Excuse the mess in the text above, I did not know how to modify it, please if anyone can fix it, thanks
-
- Limiters:
02002: unlimited 0 ms burst 0
q133074 100 sl. 0 flows (1 buckets) sched 67538 weight 0 lmax 0 pr... -
- Ok, I'm working on a solution, and found the problem in the code, I put the fix and I'm probing now, it appears that ...
-
- Version 2.0.3 is also affected by this problem.
-
06:59 PM Bug #3067 (Rejected): Virtual IP Removal
- I noticed that pfsense allows you to remove Virtual IPs that are currently in use in a 1:1 NAT which will cause issue...
-
05:06 PM Bug #3066 (Rejected): Proxy ARP failing with kernel error
- Hello, having trouble using Virtual IPs. My problem was worked around by using an Interface alias.
It appeared I w... -
- I am still seeing this issue. I have turned off Track Interface for DHCP on my LAN Interface and ipv6 is now only tur...
-
- Can you please confirm that this is not anymore an issue?
-
- that's intentional for the time being. There's another ticket open on it.
-
- Hi,
I've just noticed that the sync of firewall rules description "eats" the char ">"
For example, on Firewall1... -
07:37 AM Bug #3064: Broadcom BCM57780 Nic lights not working (Activity and Link)
- The patch link is not correct, here is the correct one - http://svnweb.freebsd.org/base/head/sys/dev/bge/if_bge.c?r1=...
-
- It appears that the freeBSD 8.x and even the 9.X code has a bug where once the network is configured it turns off the...
-
04:51 AM Bug #3063: system will crash after "PowerD" enabled.
- Hardware: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz, Normal PC.
I did not find any obvious message about this f... -
- I am using pfsense as a transparent firewall.
I found the system would be hanged(no any message) in a few minute, ... -
-
-
-
- Can you try with tomorrows snapshots.
-
- confirmed fixed
-
- Also, I have replicated the test by Josh Stompro above (changing an existing alias used by a static route from IP to ...
-
- I have tested this with the latest build and it works as intended. I created two aliases, one with a FQDN and one wit...
-
- I have tested this and can confirm it works properly (2.1-RC0 - Jul 1 15:22:23 EDT 2013). I created a new shaping rul...
-
- confirmed fixed in testing and on customer's production system where problem was discovered.
07/01/2013
-
- Captive portal does not correctly release pipe numbers, is continually increasing them until they are exhausted, and ...
-
- Closed per submitter request
-
- You can close this bug
-
- /etc/bogons is back to the short couple of lines version and /etc/bogonsv6 is empty after every snapshot update. Woul...
06/30/2013
-
- It was changed only on 2.1, not 2.0.x, because of this you still see the issue on 2.0.3. You can apply the change on ...
-
03:18 AM Bug #2998: Diffserv Code Point options misleading
- I decided to go for the "minimally invasive" approach:
1. I added the CSx itens to the drop-down box.
2. I fixed ...
06/29/2013
-
05:43 AM Bug #2626: Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
- Just updated to 2.0.3; this problem is still here (or came back), with the same cause as before. In my installed copy...
06/28/2013
-
08:14 PM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- I'm also looking forward for the solution of this. I currently halt my 14 sites installation until the bug will be fi...
-
- http://forum.pfsense.org/index.php/topic,63941.0.html
-
- After several weeks looking for the origin of the problem exposed in this forum, I concluded that the problem occurs ...
-
01:05 PM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
For the very first time, I have been able to go over 4 days without loosing IPv6 addressing. This is very positive...-
- That happens when a package has failed to reinstall, which is a problem with a specific package in most cases. Check ...
-
- 1. I have posted this in the forum at http://forum.pfsense.org/index.php/topic,63793.0.html
The upgrade status scr...
06/27/2013
-
11:23 AM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- I just updated from a January build to yesterday's build and still get altq errors similar to those above on my lagg0...
-
10:35 AM pfSense Packages Bug #3056: Unbound not getting IPv6 host overrides
- Added support for DHCPv6 reservations and /etc/hosts entries in PR 466
-
07:57 AM Bug #1399: rrdtool respawning too fast
- Attaching rrdtool.core from 2.1 p13
-
- Same message appeared to me after upgrade from 2.0.3 to 2.1 p13
I have anohter server upgraded to 2.1 p8 (few days e... -
- Forget my bullshit about ipfw above - Goole managed to sneak some ipfw results into my "pf" search, I just a bit conf...
-
- was a bad snapshot that was removed
-
02:27 AM Bug #3058: Latest 2.1 RC update killed Alix
- Please close bugreport - seems the problem has not reappeared. Sorry for wasting time, my apologies.
06/26/2013
-
- Submitted PR #456 as fix.
Turns out the issue isn't IPv6 addresses, it was the duplicate host handling, if both IP... -
- Apparently the AHCI module may also be required for trim to work properly. See http://forum.pfsense.org/index.php/top...
-
01:42 PM Bug #3047: IPSEC remote access broken in 2.03
- We're using VMWare PFSense. Upgraded to 2.1 but still no luck with mobile vpn.
-
- I was reading the whole story again since I was not able to reproduce the issue, and I have a suspect. Could you plea...
-
- Craig Falconer wrote:
> If this affects others, can Tuesday's build be pulled before too many people are affected?
... -
- Just updated from Monday to Tuesday's build on my spare alix 2d2....
06/25/2013
-
- They are working on current snapshots in our environment. There must be something else wrong in your setup, so please...
-
02:10 PM Bug #3055: System logs not work right
- Sorry for my english, but maybe I have not explained well.
The problem is server-side logs that not receive the logs... -
- I've been updating a snapshot copy since December 2012 without a full rebuild. I'm wonder if I start with a fresh bet...
-
- Just updated to the same snapshot, and radvd seems to have come up just fine for me. This is also on Comcast, so I wo...
-
-
01:24 PM Bug #3047: IPSEC remote access broken in 2.03
- Not sure if it matters, but I am on an ALIX device. I have since moved back to 2.02 because I cannot afford the down...
-
- @@Jun 24 16:00:18 racoon: ERROR: failed to begin ipsec sa negotication.
Jun 24 16:00:18 racoon: ERROR: no configur... -
- Robert Guerra wrote:
> Just updated to June 24 release (details below) and IPv6 connectivity -still - does not work.... -
07:54 AM
Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- Just updated to June 24 release (details below) and IPv6 connectivity -still - does not work. Am on Comcast service a...
-
- As the TOS field has an "unstable history" (RFC 3168), a most flexible approach should be imperative. That means that...
-
- Could you please try a recent snapshot? It should be fixed now.
-
06/24/2013
-
- Proposed fix in https://github.com/pfsense/pfsense/pull/677
-
- When selecting 'Assisted' mode for Router Advertisements, OSX clients use stateless autoconfig and do not obtain DHCP...
-
- DHCPv6 reservations don't appear to be added to unbound.conf either (DHCPv4 reservations are added).
-
- Running latest 2.1RC with unbound 1.4.20_7 installed.
When setting host overrides in Services > DNS Forwarder the ... -
- Not enough information here for a valid bug report. Please start a thread on the forum and if, after assistance and d...
-
- I flag - > "Everything" in "Remote Syslog Contents" but not all event is send to a syslog.
In my case only the login... -
02:09 PM
Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Tried with:
2.1-RC0 (amd64)
built on Mon Jun 24 04:05:41 EDT 2013
FreeBSD 8.3-RELEASE-p8
Boot up. WAN & LAN g... -
- Could you please check a recent snapshot?
-
- I'm still seeing an issue with RADVD not restarting automatically after a dhcp renew from my internet provider (Comca...
-
- This has been working for me with the past several snapshots I've tested.
-
- Could you please check a recent snapshot?
-
- This seems to have been working fine for me on Comcast Home for the past few snapshots that I've tried. After > 8 day...
-
- Can you test again with latest snapshots and see if this is fixed?
-
- The system log would be interesting to see here
-
- Applied in changeset commit:efe42b5a05dfc7c718b04fb00391f251d846a2f2.
-
- Applied in changeset commit:d13b7363304390736fa4686b4544319f26bdba92.
-
06:44 AM Bug #3054: openBGPd stoped working
- frustration is never a good friend :
excuse my p.s. :)
step 1 install: pfSense-LiveCD-2.1-RC0-amd64-20130618-1856... -
- ok some more info :
step 1 : install pfSense-memstick-2.1-RC0-amd64-20130618-1856.img
step 2 : make all confs in Se... -
- Applied in changeset pfsense-tools:commit:0416a5113ab777964567fc30b78647b6167f8b75.
06/23/2013
-
- not enough here to be a legit bug report, please post info to the forum or list for help.
-
- After upgrade to :
2.1-RC0 (amd64)
built on Sat Jun 22 15:45:58 EDT 2013
openBGPd stopped working giving follo...
06/22/2013
-
12:27 AM Bug #2997: CARP and pfSync traffic issues with traffic shaping
- Hi,
this should be already foreseen (http://forum.pfsense.org/index.php/topic,45045.msg344264.html#msg344264), ju...
06/21/2013
-
11:54 AM Feature #3053 (New): Automatically add DHCP static addresses to CP passthru-mac
- Add a new option to Captive Portal to automatically add static addresses configured on DHCP server to the list of pas...
-
05:03 AM Bug #3052 (Rejected): Adding a static dhcp for mac address dissapears.
- Cannot say if its a bug or normal behaviour. This is what i have
1 wan, 3 Vlan's
When i want to add a static ma... -
- Thanks.
I will test as soon as it's in a snapshot (im currently on 2.1RC0). Backing out the old patch already yielde...
06/20/2013
-
09:27 PM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- I have placed all the changes I have made to racoon up on Github. You can find them "here":https://github.com/duchsc...
-
12:24 PM pfSense Packages Bug #3051: Snort 2.9.4.6 pkg v. 2.5.9 -> wansuppress
- I can confirm that bug on Snort 2.9.4.6 pkg v. 2.5.9.
pfSense 2.1 RC0 -
- Pfsense 2.1 of 06/19/2013 17:23.
If change wansuppress on Snort, is necessary reboot Pfsense to enable the new rule... -
- Not any single crash with the new file. The OpenNTPD service is running rock-stable. No crash, no error in system-log...
-
-
04:44 AM Bug #3050: error loading TCP block or reject rule
- Erik Augustsson wrote:
> Works for me
same here
-
- Seems correct as a patch as long as you do not get LORs.
I though this was handled in the ioctl patch code already...
06/19/2013
-
- I think I'm close to the problem, I deleted the database files belonging to the captive portal " /var/db " and then r...
-
- It's fine to leave bandwidth blank, altq fills it using the interface bandwidth. On my tests I could reproduce the is...
-
08:20 AM Bug #2511: DHCPv6 Shows Wrong DUID
- I seem to have a similar problem.
A windows 8 client with the DUID 00:01:00:01:18:1c:59:c5:00:25:22:92:f5:43 (veri... -
07:02 AM Bug #3050: error loading TCP block or reject rule
- Works for me
-
- same Problem since PFSense 2.0.2 with Android 4.1.2, 4.2, iOS 4/5.
Downgrade back to 2.0.1 and everything is fine wi... -
06/18/2013
-
- I backed the following patch out from ipsec-tools and many of my issues when away.
https://github.com/duchscherd/p... -
08:19 PM Bug #3049: RAM Disk RRD Loss Vulnerability
-
Fix verified.
RRD backup file rrd.tgz is retained after reboot.
-
- Applied in changeset commit:ef01b77f6dc5e2f4ba254739a1792207e7b52a09.
-
- Applied in changeset commit:dc21d4d5618e5190dbc85a479489b230063450f5.
-
- Applied in changeset commit:40e6086ada6b73f6432b7ac93d4b376941028b09.
-
- Applied in changeset commit:2706c79b47373fd294446d7ab0cc25d79bd494a1.
-
- Applied in changeset commit:5015ec4cd0c497ca1db68e7393d2898ba57efb0b.
-
- Applied in changeset commit:57fa70112a9ab5bec06f5dd64bf0d987dfdae159.
-
- After updating to _2.1-RC0 (amd64) built on Mon Jun 17 17:28:37 EDT 2013_ none of my TCP block rules are working anym...
-
-
- Since implement your new file yesterday, i habe no more ntpd crashes. I will report again at the end of the week.
-
02:21 AM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Andreas, that's not really relevant to this bug - this is specifically for making altq work with the VLAN driver, tha...
-
01:43 AM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Sorry i use the latest 2.1 RC0 i386 snapshot
-
- Hi
i'm sorry for reopening this ticket.
I have four openvpn connections and try to configure a traffic shaper wit... -
01:02 AM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- I did a more in-depth analysis with tcpdumps (LAN/WAN) here:
http://forum.pfsense.org/index.php/topic,62237.msg34202...
Also available in: Atom