Activity
From 10/01/2013 to 10/30/2013
10/30/2013
-
08:01 PM Revision 85bdf997: Add Auth Digest to OpenVPN wizard also.
-
-
- The IPsec log parsing code does not skip disabled Phase 1 entries, however, that may be OK but needs consideration.
... -
03:29 AM Bug #3280 (New): Assigning GRE interface and configuring an IP address removes the IP from the underlying gre interface in the OS
10/29/2013
-
- Applied in changeset commit:204bec28359f7ef8bc0dee97b909839a0566daf8.
-
- Applied in changeset commit:34e178135b252d6664d1ba47dc877e099033ca7f.
-
- Applied in changeset commit:6721d6d0443bd7e697bd6ca33f470c801608df7e.
-
- Applied in changeset commit:bb6291e0204ffe2828fe9c9425bdae9c8541fe54.
- 09:35 AM Revision 204bec28: Revert "Define dynamic gateway for GRE interfaces and do not user to define IP address to the interface. Fixes #3280"
- Another solution will be implemented
This reverts commit 6721d6d0443bd7e697bd6ca33f470c801608df7e. - 09:35 AM Revision 34e17813: Revert "Define dynamic gateway for GRE interfaces and do not user to define IP address to the interface. Fixes #3280"
- Another solution will be implemented
This reverts commit bb6291e0204ffe2828fe9c9425bdae9c8541fe54. - 09:06 AM Revision 6721d6d0: Define dynamic gateway for GRE interfaces and do not user to define IP address to the interface. Fixes #3280
- 09:05 AM Revision bb6291e0: Define dynamic gateway for GRE interfaces and do not user to define IP address to the interface. Fixes #3280
- 12:20 AM Revision d3ad6cf0: fix typo
- 12:20 AM Revision 9aca7390: fix typo
10/28/2013
- 04:20 PM Revision 1dc0e7f4: Make return_gateways_array() return all disabled gateways when $disabled is true, it should fix #3291
- 04:19 PM Revision aec89bd3: Make return_gateways_array() return all disabled gateways when $disabled is true, it should fix #3291
-
01:29 PM Revision b84ac9c6: Merge pull request #822 from CharlieMarshall/interfacesWidget
- cleanup interfaces.widget.php
- 12:35 PM Revision 20623f57: Fix an attempt to read unset variable $rtent
- 12:35 PM Revision 7610d228: Fix an attempt to read unset variable $rtent
-
- Applied in changeset commit:1dc0e7f4f16b57ecca40157c5c8f76e9a60a914e.
-
- Applied in changeset commit:aec89bd3c2d0f9b464e0d7cc6d189c49966d6f0b.
-
- Duplicate of #3234
10/27/2013
-
03:17 PM Bug #3295: /diag_authentication.php throws error
- Suggested fix:
wrap getNasIP() in if (!function_exists('getNasIP')) {} in both /usr/local/captiveportal/radius_authe... -
- Trying to load this page results in the following error:
Fatal error: Cannot redeclare getNasIP() (previously decl...
10/26/2013
-
07:49 AM Bug #3294 (Resolved): Creating users/groups silently fails on read only filesystem
- Was setting up VPN and following various guides, which included the creation of a group and a user.
I did this, an...
10/25/2013
-
09:42 PM Bug #3293 (Resolved): Using timezone Europe/Oslo causes firewall/system logs to be displayed in UTC
- When configuring pfSense with timezone 'Europe/Oslo', the time shows correctly in the dashboard. The firewall/system ...
- 07:15 PM Revision 0c951d98: cleanup interfaces.widget.php
-
04:24 PM Bug #3290: IPV6 conectivity not restored after cablemodem reset
- Steps to reproduce
- Establish IPV6 connectivity on Comcast network.
- Cycle cablemodem power.
- Observe that IP... -
04:10 PM pfSense Packages Bug #3292 (Resolved): Syslog-ng accidentally gzip's SSL key file + fix
- First off, pfSense is awesome, you folks rock.
Second off, there's a hilariously annoying bug with syslog-ng when ... -
- When adding a new gateway, it doesn't check name collision with disabled interfaces and in the end you have 2 gateway...
- 12:42 PM Revision bf755503: Use a more accurate error message, fixes #3282
- 12:41 PM Revision f44ac2e9: Use a more accurate error message, fixes #3282
-
- Applied in changeset commit:bf75550387f2d76a0300253a322f42d6ecdf6460.
-
- Applied in changeset commit:f44ac2e9734396efa0653fbed255c28e074ae8dd.
-
- Scott Smith wrote:
> i too have found this same problem. My config has been workign for years and I have upgraded to... -
01:27 AM Bug #3235: Could not open shared memory for read 1000
- Tested on a stock 2.1-RELEASE test system. Set Permanent Read/Write, rebooted.
Diagnostics->NanoBSD shows reference ...
10/24/2013
-
- This is a significant issue since Comcast is aggressively rolling out IPV6 support, initiating frequent late-night mo...
-
- Cablemodem reset causes complete loss of IPV6 conectivity.
-
09:52 PM Bug #3249: DHCP Server/DHCP Relay both say the other is started
- i too have found this same problem. My config has been workign for years and I have upgraded to
2.1-RELEASE (i386... -
-
- 08:07 PM Revision b8250344: Fix #3235
- . diag_nanobsd.php:
. Since conf_mount_ro() is always being called, always call
conf_mount_rw to keep refcount co... - 08:01 PM Revision 785158c6: Fix #3235
- . diag_nanobsd.php:
. Since conf_mount_ro() is always being called, always call
conf_mount_rw to keep refcount co... -
03:54 PM Bug #3286: Radvd will not function with IPv6 Prefix delegation other than 64 on WAN
- I am too busy to pull the files from a completely stock setup but I was able to pull them from a clean 2.1 install wi...
-
- Could you share relevant part of config.xml and radvd.conf?
-
- Applied in changeset commit:53c5407e646028a003b2765a87dd3316b21a9497.
-
- Applied in changeset commit:cbe12b8de3fa374e535d4478ab84a4a2c5f6e725.
-
- Applied in changeset commit:b8250344f5f02851259ffde6fed8da40ddeaf0af.
-
- Applied in changeset commit:785158c6c48e4e1842791d3b33d9b0395332991d.
-
12:17 PM Feature #3289 (Needs Patch): VPN tunnels configuration displayed in pages
- Well, if you have few hundred tunnels the web page gets too long and kind a hard do scroll or use at all on slower PC...
-
- My feedback above applies - using the version of rc.openvpn merged into the 2.1 branch. It is a good thing IMHO.
Ign... -
06:27 AM Bug #3255 (Feedback): OpenVPN client or server on GWG does not failover
- didn't realize the merge was pulled, last update I noticed was Phil's 2 days ago, back to Feedback since it's merged.
-
-
- Tested with the 2.1 branch version of rc.openvpn
It successfully writes new servern.conf and clientn.conf files for ... -
- config or network issue, not a bug.
-
02:11 AM Feature #3288: Support interface macros in Outbound NAT rules
- Forgot to attach a screenshot (>.<)'
-
- There is no automatic aliases for LANs in NAT Outbound. It would very useful when creating rules if there were predef...
-
- There is no IPv6 data reflected in RRD Graphs at all. See attachment.
10/23/2013
-
03:19 PM Revision 599d564e: Prepend ipsec_ here as well for better protection
-
-
-
-
- Additional information, if it helps. The LAN and WAN interfaces are as follows:
LAN:em0
WAN:em0_vlan100 -
- Radvd functions properly when LAN interface is set as tracking to WAN and WAN is set to DHCP6 with a prefix delegatio...
- 01:58 PM Revision a4e4b560: Make sure pf rule labels never have more than 63 chars. It should fix #3208
- 01:58 PM Revision 9d879385: Make sure pf rule labels never have more than 63 chars. It should fix #3208
- 11:58 AM Revision 5d21bce0: Remove redundant test for OpenVPN resync_needed
- 11:58 AM Revision f8804b74: Check for disabled OpenVPN instances in openvpn_resync_if_needed
- It is much cleaner if we check first for disabled OpenVPN instances, before diving into all the other checks. Note, t...
- 11:57 AM Revision 4bf23d32: Fix logic inn detecting if OpenVPN resync needed
- Commit https://github.com/pfsense/pfsense/commit/f33dcc5c79c54af7daf91a81cfdd7f489e8cb67c reversed the logic sequence...
- 11:52 AM Revision a3e232db: Merge pull request #813 from phil-davis/master
- Fix logic in detecting if OpenVPN resync needed, fixes #3255
-
- Applied in changeset commit:a4e4b5609c8ec28b9e680e8813a110b9cf7aedc7.
-
- Applied in changeset commit:9d879385019c6640fddf16b639d910e17e67f5d4.
-
06:50 AM
Bug #3255 (Feedback): OpenVPN client or server on GWG does not failover
- Applied in changeset commit:a3e232db7d881d3718884676773c3c4780d7ac7f.
-
- You reported an issue, saying the update freq. unit was missing and it's confuse, this issue was fixed and for this r...
-
04:22 AM Bug #3222: Firewall URL table aliases "Update Freq." has no units
- Renato Botelho wrote:
> I changed the text to clarify freq. is in days. Abou the other changes you suggested, feel f...
10/22/2013
-
10:26 PM pfSense Packages Bug #3285 (Resolved): spamd.log corrupt/truncated
- noticed log became truncated or corrupt after a period of time (40 to 90 entries, depending upon entry length)
per... -
-
-
-
-
03:45 PM Bug #3284: dhcpleases cannot identify domains set in DHCP server settings, breaks dnsmasq lookups
- I should have added an example of how dhcpleases is invoked:...
-
- dhcpleases is started with the domain suffix set to the domain of the pfsense installation. DHCP servers on individua...
-
-
-
-
- 02:42 PM Revision f144493c: Make it more explicit that 'update freq.' unit is days
- 02:40 PM Revision dd8e414e: Remove unused variable
- 02:40 PM Revision 2b6e6fee: Make it more explicit that 'update freq.' unit is days
- 02:39 PM Revision 6ff71781: Remove unused variable
- 01:31 PM Revision edc56e48: Add missing privileges to the list, it fixes #3279
- 01:31 PM Revision c03d4be1: Fix typo and whitespace
- 01:31 PM Revision 9b104557: Fix priv name
- 01:31 PM Revision 69aba859: Add missing privileges to the list, it fixes #3279
- 01:30 PM Revision 93f51e4b: Fix typo and whitespace
- 01:29 PM Revision a8521a63: Fix priv name
-
-
-
- It is code in the "rate" binary that controls which data is actually fed through to the front-end browser code. The "...
-
10:47 AM Bug #3263: status_graph.php IP list is limited to interface subnet
- Do you mean that if I upgrade that page from the source I can re-enable that feature ?
-
- There was a time during 2.1 development when the whole list of IP addresses with their traffic was sent through to th...
-
-
- Is the pull request, or some variation of the code in it, going to get merged some time soon?
-
- I changed the text to clarify freq. is in days. Abou the other changes you suggested, feel free to send a pull request.
-
- Applied in changeset commit:edc56e4876ce32e70ca9cf37f0310159e8d59c56.
-
- Applied in changeset commit:69aba8590e46b1704542ecb677f335335e2e9f75.
10/21/2013
- 08:09 PM Revision 53523624: Fix #3283, use jQuery to change attributes based on id
- 08:03 PM Revision 521504d1: Set id for select elements created dynamicaly created
- 08:01 PM Revision 6794e407: Fix #3283, use jQuery to change attributes based on id
- 07:58 PM Revision f4100c0e: Set id for select elements created dynamicaly created
-
- Applied in changeset commit:53523624259f97fb7148d80ae581fa09291e0c55.
-
- Applied in changeset commit:6794e407b0b3b410757c5ac1a58c3264b5a79197.
-
- If you edit an existing alias, click X on a row to remove it, then click + to add a new row, the new row comes up wit...
- 02:03 PM Revision dd8722db: Limit CIDR choices for IPv4 on GRE interface, fixes #3277
- 02:02 PM Revision de304598: Limit CIDR choices for IPv4 on GRE interface, fixes #3277
- 12:59 PM Revision e782e8f4: Fix #3259. Save 'packet loss rate' and 'bucket size' for limiter queues
- 12:59 PM Revision dda9c67f: Fix #3259. Save 'packet loss rate' and 'bucket size' for limiter queues
-
- Attempting to add an IPv4 gateway to an interface where no IPv4 address can be located results in the error "You can ...
-
- Still trying to gather information but this has been directly observed on a customer system.
GRE tunnel configured... -
- If you assign a GRE interface and set the IPv4 type to Static, and configure an address identical to the address on t...
-
10:51 AM Bug #3279 (Resolved): Usermanager: No way to assign permissions to DHCPv6 pages
- The pages for "Status: DHCPv6 Leases" and "Services: DHCPv6 Server" do not appear in the list of available pages for ...
-
- Applied in changeset commit:de3045982be1dcc509e7e519b63c147ed4e15148.
-
- Applied in changeset commit:dd8722db1f8da8641eab4831f96fa5b1740c35e9.
-
- On most screens (including the GIF interface configuration) when an IPv4 address is entered, the CIDR drop-down cuts ...
-
08:19 AM
Bug #3278 (Rejected): OpenVPN - Unable to contact daemon, service not running?
- I have actually seen this issue on previous versions as well. Not too long ago, we switched from ipsec to openvpn, an...
-
- The issue was fixed. What you are proposing now is a change of the way pfSense creates the interface. What you alread...
-
- Applied in changeset commit:e782e8f43f2c09a2f9cf4ab952ee718d71fc9237.
-
- Applied in changeset commit:dda9c67f7f8fdc3401a0d3c7b885630d128e2fbb.
-
- Here is a vid cap of the bug
https://www.youtube.com/watch?v=YYjNhLkXjOI
10/20/2013
-
08:11 AM pfSense Packages Bug #3274 (Closed): Unbound 1.4.21_1 install fails
10/19/2013
-
05:19 PM Bug #3276 (Rejected): [ATH] Atheros 802.11 PCI card - Support of 802.11n
- Hello,
I'm using Pfsense witch an Atheros WIFI card (chip AR9285). I can't use the standard "802.11n " although th... -
12:41 PM pfSense Packages Bug #3274: Unbound 1.4.21_1 install fails
- Warren, thanks a lot for your quick reaction! Your second stab at fixing it worked for me, on both of my appliances b...
-
- Applied in changeset commit:c5abc3905311d69e442989712cceb391719f6deb.
-
- Applied in changeset commit:3c7e7ebe4eeeeca998bb7b323322eb70ccd4f281.
-
- I attached two files that show what I mean. In the install log you can see that pfSense 2.0.2-RELEASE-amd64, installe...
-
06:56 AM pfSense Packages Bug #3274: Unbound 1.4.21_1 install fails
- I am able to install 1.4.21_1 but the Unbound binary is still 1.4.20.
-
- https://redmine.pfsense.org/issues/3275
-
- Yes please
-
- Should I raise separate issue for what I've mentioned in my previous update?
-
-
- Resolved.
Noticed another issue on the same subject:
1. I have enabled and working VLAN interface.
2. Skipping s... -
- Having VLAN interface enabled and in running state I go to "Interfaces: Assign network ports" and delete the interfac...
10/18/2013
- 08:43 PM Revision ea838318: Fix #3273
- - When you disable a interface, it destroys vlan interface from system.
Do not report error when interface doesn't ex... - 08:41 PM Revision 36b7f215: Fix #3273
- - When you disable a interface, it destroys vlan interface from system.
Do not report error when interface doesn't ex... -
- According to control files "pkg_config.8.xml" and "pkg_config.8.xml.amd64" the package version of Unbound has been up...
- 08:32 PM Revision 40a8f669: Prevent a possible division by zero. it fixes #3212
- 08:32 PM Revision 488e8c81: Prevent a possible division by zero. it fixes #3212
-
05:26 PM Bug #3252: Diagnostics-Tables inconsistency
- You have an email.
-
- May I take a look at your /tmp/rules.debug?
-
- Renato Botelho wrote:
> Do you have any firewall rule using snort_ips or snort_wl_hosts? When the table is not used ... -
- Do you have any firewall rule using snort_ips or snort_wl_hosts? When the table is not used by any pf rule, it's not ...
-
- Applied in changeset commit:ea838318c0837b532b7ddf5dbc6881fd9f27cb1a.
-
- Applied in changeset commit:36b7f215449c027992858f324917a6ad4611e73b.
-
- I'm following the steps to create an interface, but int reverse.
1. Disable interface at Interfaces.
2. Delete the ... -
- Applied in changeset commit:d199db0bc5bf99c77ec29d01edb646b7713cc9a8.
-
- Applied in changeset commit:40a8f669c2dbdc70a53009b97597b1982a5f5d65.
-
- Applied in changeset commit:488e8c81adf1b9c11320ef91de7812a7332b2228.
-
- OS interfaces are still created and up in ifconfig after the VLAN ports arecreated at Interfaces: VLAN.
Assigning an... -
- Applied in changeset commit:ea1084476533bf9452d9f6f1012787c5c73e3939.
-
- Applied in changeset commit:bae42aaf13bd680f67a9b4f1a4325b03f80f86b4.
- 02:38 PM Revision 6666ef48: Actually there is no reason to set a variable just to use once
- 02:38 PM Revision 06896c6a: Actually there is no reason to set a variable just to use once
- 02:31 PM Revision 2db5f9c2: Fix #3242 and some code cleanup:
- - Only explode '/' and set address_subnet when address is a subnet, it
fixes issue reported at #3242
- While I'm he... - 02:26 PM Revision 4e8a79a8: Fix #3242 and some code cleanup:
- - Only explode '/' and set address_subnet when address is a subnet, it
fixes issue reported at #3242
- While I'm he... - 01:40 PM Revision ea108447: Make sure vlan interface exist when it's being configured, it fixes #3270
- 01:40 PM Revision bae42aaf: Make sure vlan interface exist when it's being configured, it fixes #3270
-
10:37 AM Bug #3271: NAT UDP to port range creates rdr for all interfaces, and no nat rule.
- Upon examination, I see that on the nat reflection 'disable' doesn't emit the rdr on the other interfaces, while 'pur...
-
- Chris, check again. When 'pure nat' is specified nevertheless the rdr rule is emitted on the other interfaces.
-
- And, looking it to it even further, even though 'pure nat' was asked for, rules.debug shows:
# NAT Inbound Redirec... -
- Applied in changeset commit:2db5f9c23c7158b61f839d1679bde3ad3f135bdf.
-
- Applied in changeset commit:4e8a79a83043c0880651d749ac67528615a03d90.
-
- I got it, the problem only happens because your URL doesn't have protocol. I pushed a fix.
-
06:43 AM Bug #3242: editing alias url table doesnt show full link
- sent
-
- Bipin Chandra wrote:
> shall i send u my config file if that may show something?
yes please, send it to renato@pf... -
- shall i send u my config file if that may show something?
-
- It would be great if there was a possibility to specify port/port range which I want to block not all ports.
For e...
10/17/2013
-
- that's because you have reflection on, that's how reflection works.
-
- Looking into it further, I notice that the interface specified on the 'port forward' gui is pretty much ignored. The...
-
- The same happens when an individual udp port is specified and not a range. rdr rules are created for every interface...
-
- I could not replicate this on any of my test systems
-
- I couldn't replicate the issue on any of my test systems.
-
-
- Applied in changeset commit:dd33fd4e8b3fb66f49ae8337823264ab0d13504c.
-
- MD5 is harmful and should be avoided.
-
04:10 AM Bug #3269: Problem System: Certificate Authority Manager
- My comunication is only an advice. Insert an option in pfSense don't mean with pfSense will become insicure, because ...
-
03:55 AM Bug #3269: Problem System: Certificate Authority Manager
- Until?! :-O If they've not noticed they are using insecure crap in 5 years, you'd better find a viable vendor (and di...
- 08:43 AM Revision dd33fd4e: Split SSL/TLS into separate checkboxes so that plaintext connections can be made secured by using STARTTLS. Support for SMTPS connections should probably be done away with in future. Fixes #3180
10/16/2013
-
- The nat rule asking for a port forward on one interface (em0/WAN):
INET1MC UDP * * 97.64.213.58 15000 - 15400 ... -
- Describing the steps to reproduce the effect I've noticed:
1. Interfaces: VLAN > Create VLAN on interface
2. Chec... - 12:18 PM Revision 78b0e51e: Fix #3268 - avoid pf table names conflict:
- . Create a list of reserved table names for the hardcoded ones
. Use this list to validate aliases and load balance p... - 12:18 PM Revision c48fdaa4: Fix #3268 - avoid pf table names conflict:
- . Create a list of reserved table names for the hardcoded ones
. Use this list to validate aliases and load balance p... -
- Yes, MD5 is insicure, but untill yealink don't update your ip-phone for SHA support is impossible use this phone with...
-
- Offering stuff known to be insecure since 2008 at least on not an option. Ditch the crappy HW. http://www.win.tue.nl/...
-
- From pfSense 2.0.1 to 2.1 when you create a certificate, (in pfSense 2.1) you must select an algorithm (Sha1 , sha256...
-
- Applied in changeset commit:78b0e51e9a135804bfea307ea30c25fe16473da1.
-
- Applied in changeset commit:c48fdaa40effe9edc8bb4fb933e124a93cb24a0d.
-
- i have a similar issue but in some ways its different, my isp sometimes blocks all traffic to internet and only gives...
-
02:53 AM Bug #742: apinger doesn't recover opt wan when connection returns.
- Same issue for us on pfsense 2.1 Release:
if opt3 goes down, it doesn't recover and the "last check" time on /status...
10/15/2013
-
10:49 PM Bug #3257: IP Alias on CARP IP doesn't work where IP alias above CARP parent in list
- *How to reproduce this:*
I ran into this bug when I modified a setup pulled in from PFSense 2.0.x that looked like t... -
10:06 PM pfSense Packages Bug #999: vhosts does not show up as started
- I can confirm this is still an issue with the package. It seems to work outside the fact there is no way to know if ...
-
08:09 PM Bug #3045: NTPD crash / doesn't come up
- also line
driftfile /var/db/ntpd.drift
seems to be involved.
those really seems to be directory permission is... -
- Problem seems to be related to line:
statsdir /var/log/ntp
in /var/etc/ntp.conf.
After commenting this line, n... -
- Issue just presented to me as well, on both members of cluster (pfSense 2.1 stable), Server SunFire X3-2...
I can at... -
01:36 PM Bug #3045: NTPD crash / doesn't come up
- It is also incredibly inconsistent. If I wait an hour and try to start, perhaps ntpd will start without issue and run.
-
- Seeing this exact same issue on 2.1 Release i386 and amd64. I have attached my ntpd.core from an i386 install here. T...
-
- Reserved table names aren't prohibited from being entered as a table name in load_balancer_pool_edit.php. At least <s...
- 01:30 PM Revision c858a035: Merge pull request #817 from stephanel/master
- Added OVH DynHOST in dynamic DNS services
- 01:10 PM Revision 09dfec24: Merge pull request #819 from CharlieMarshall/responsive
- make dashboard responsive (theme pfsense_ng_fs)
-
- Reopen it since pull request was not merged yet
-
- thanks!
10/14/2013
- 07:33 PM Revision b18a99d3: some tidying up
- 07:27 PM Revision e5e0fd39: make dashboard responsive
- 06:54 PM Revision 4a913451: Add Captive Portal Zones privileges definition. Fix #3216
- 06:53 PM Revision 8deaf333: Add Captive Portal Zones privileges definition. Fix #3216
-
- Applied in changeset commit:4a913451bba01ac65dcaedf31e24fcd938bbe0a2.
-
- Applied in changeset commit:8deaf333f25dc18d461d7f2b0e61b1b2c1a64ace.
-
- Is the issue still happening?
10/13/2013
-
08:01 PM Bug #3249: DHCP Server/DHCP Relay both say the other is started
- I found that config from before. I've attached it.
-
03:30 PM Bug #3267 (Closed): Can't skip wizard by clicking the pfSense logo, can't finish it normally either
- I recently set up 3 new pfSense installs (all on 2.1 final), and on all 3 I had a problem with the Setup wizard - bot...
-
- And in the category of 'somewhat evil hack that works':
If you have a master/backup pfsense setup AND
you have mo... -
- Jim,
Doing as you suggest does solve the problem for the site-site server side in a Master/Backup HA situation wi... -
- Jim, welcome news indeed. Please then change
"Interface : Whichever interface you want the server to use for incom... -
- This works fine on 2.0.2+ if you select a CARP VIP as the "Interface" for the VPN, the system automatically stops the...
-
- Update: Should have written: the 'Disable this server' and 'Disable this client' button should be forced 'ON' when ...
-
- The 'Synchronize OpenVPN' HA checkbox prevents site-site OpenVPN from working in primary/backup setups. Two enabled ...
10/12/2013
-
- its just a GUI bug i guess so can be fixed easily, the bug is in the edit page, it seems to strip the portion after /
-
- yes i have the 2.1 release in 2 alix boxes and 2 full installs and its same on all, happens all the time
10/11/2013
-
06:13 PM Feature #3265 (Closed): PATCH: auto-scale ramdisks on embedded platform based on RAM size
- per http://lists.pfsense.org/pipermail/list/2013-October/004934.html
see attached patch
(Yeah, I'm just guessing... - 01:59 PM Revision babc58d3: Allow special chars to be used on IPSec mobile login banner. Fixes #3247
- 01:59 PM Revision b4a62651: Allow special chars to be used on IPSec mobile login banner. Fixes #3247
- 12:20 PM Revision a518b337: Set default value to radius_protocol during upgrade, it should fix #3226
- 12:19 PM Revision 2d72659a: Set default value to radius_protocol during upgrade, it should fix #3226
- 11:25 AM Revision 0f0f7b2c: Fix 'Packet loss rate' and 'Bucket Size' range checking
- 11:25 AM Revision 7e7a65b0: Fix 'Packet loss rate' and 'Bucket Size' range checking
- 09:20 AM Revision feb2e013: Remove redundant test for OpenVPN resync_needed
-
- Applied in changeset commit:babc58d30843cb388559178b60aecd7a9a64bcca.
-
- Applied in changeset commit:b4a62651f8bf6e67e812b904f98c90c481a0d4c9.
-
- I added and edited URL Table aliases lots of times and couldn't reproduce it. Is it happening all the time? Are you r...
-
- Applied in changeset commit:a518b337a94bc1b5415599899d7ad01bb6a1d666.
-
- Applied in changeset commit:2d72659aec4d153ec6401ccae2a90153e45accc6.
-
- Confirmed. My appliance tells
2.1-RELEASE (i386)
built on Wed Sep 11 18:16:50 EDT 2013
FreeBSD 8.3-RELEASE-p1... -
- Are you running 2.1-RELEASE? I double checked 2 different systems and it's working as expected.
- 04:28 AM Revision b35bcd45: added favicon to logged in pages
-
04:26 AM Bug #3264 (Rejected): Double traffic on vlan interfaces "out" side
- Tested on amd64 arch version 2.1 with vlans over aggregated and single interfaces. The stats show that the traffic ov...
-
- added favicon to logged in pages
- 02:46 AM Revision cfa352c6: added favicon to logged in pages
10/10/2013
-
-
-
-
-
-
- In the page status_graph.php the IPs in the list are only from the interface subnet. This does not work when that int...
-
- Duplicate of #3173, already fixed on 2.1.
-
07:26 AM Bug #3262 (Rejected): BUG in rules application when setting a group gateway
- Dear,
I will try to explain the problem.
First , we have 2 WAN :
* WAN1 (PPOE)
* WAN2
We have configure a ... -
04:57 AM Feature #3261 (Needs Patch): RRD Graph Change
- Would it be possible to have the feature to allow a change from the 95th Percentile to whatever value we like. I.E 90...
10/09/2013
- 07:01 PM Revision a4a56eb0: Added OVH DynHOST in dynamic DNS services
-
-
-
-
-
-
-
-
10:14 AM Bug #3118: Main menu drop-down closes before selection in Chrome on Linux Mint 15
- I'm having this issue as well. Ubuntu 12.04x64 with Chrome 29.0.1547.76
-
- Applied in changeset commit:6f4a2864ad0e83f152a0cdc9c157f5d95aa8a9c7.
-
- Applied in changeset commit:0476134494c5e6079b7a98d53732b9448bc69435.
-
- When mobile IPSec clients connect they are given a virtual IP from the Virtual Address Pool. On the IPSec status page...
-
- The form on firewall_shaper_vinterface.php ignores the values entered in the fields:
Packet loss rate
Queue size
... -
03:40 AM Feature #3258 (Resolved): Allow multiple certificates to be revoked in a single step
- If you have to revoke more than once certificate, the process is pretty cumbersome because you have to edit the CRL a...
10/08/2013
-
07:58 PM Bug #3257: IP Alias on CARP IP doesn't work where IP alias above CARP parent in list
- I have tested now again and saw that problem resource is if CARP Ip is defined after IP Alias (order priority problem...
-
- Sorry, affected version is 2.1
-
- I have 300 over IPs in 3 different subnets. I have added 3 different CARP IPs from each subnet. Other IPs on them as ...
-
05:31 PM Bug #3256: dnsmasq replying with incorrect address
- Seems to go back to normal/proper responses after an unknown amount of time as well.
-
- Not the iphone...
-
- Using nslookup from multiple windows 7 clients, got a reply of another DHCP client's address for multiple queries of ...
-
- I just got bitten by this as well, running 2.1-RELEASE (i386). See attached.
I also can verify that turning off the... -
- David Wood wrote:
> At this moment, with the last commit being 4dfc14961006b0702d1c5e18190b3fcd64dd4d76 , the typo I... -
- Applied in changeset commit:ec6f62c13304169f44ee47d21a09373cf6f4fd22.
-
- This is fixed by https://github.com/pfsense/pfsense/pull/813
-
- If I have a GWG "OpenVPNGWG" with WAN1=tier1, WAN2=tier2 then the initial OpenVPN client or server on "OpenVPNGWG" co...
10/07/2013
-
- thanks
-
06:26 AM Bug #3240: CoDel not applied on non-priq queue types
- Fix confirmed working.
-
- Pull request was already merged
-
-
- Fixed for me.
-
- Pull request was merged, please confirm it fixed the issue.
- 05:38 PM Revision e390d664: Replace pfSense with the rebrand
- 05:36 PM Revision 7add9de0: fix text - add space between sentences. This got lost in another commit
- 05:35 PM Revision 2b4f2f23: Replace pfSense with the rebrand
- 05:35 PM Revision 2df0e712: Replace pfSense with the rebrand
-
04:21 PM pfSense Packages Bug #3056: Unbound not getting IPv6 host overrides
- At this moment, with the last commit being 4dfc14961006b0702d1c5e18190b3fcd64dd4d76 , the typo I mentioned is in line...
-
- Radvd only distributes the local interface link-local address of the tracking interface as a DNS server when the DNS ...
-
11:30 AM Bug #3216: PFSense 2.1 - Captive Portal Zone - is not avaible in user effective privileges
- I was able to work around this.
Add the lines below to /etc/inc/priv.defs.inc (Toward the end but anywhere as long... -
07:17 AM Bug #3250: problems with ixgbe driver in pfsense 2.1 release
- Hi,
thanks for update.
any due date for 2.1.1 release? -
- Please send the patch as a pull request on github.
10/05/2013
-
01:11 PM Bug #3205: Partial system freeze when disconnecting USB 3G stick
- Same here. Huawei E1820. 2.1 RELEASE on physical VIA EPIA and VirtualBox.
First time configured without problems, t...
10/04/2013
-
- See attached files.
!pfsense_aliases.png!
!pfsense_tables.png!
Diagnostics-Tables does not return consistent r... -
-
- 11:41 AM Revision 9e3cc25b: use (self) instead of any for web lockout
- 11:40 AM Revision c3b9bcb2: use (self) instead of any for web lockout
-
- I pulled the dhcrelay section out of the config and restored from it. That seems to have done the trick. Normally, ...
-
- Nothing in the upgrade that would have enabled it if it weren't already enabled. We'd need to see a copy of the pre-u...
-
- I can't explain it, either. I'm not sure if I could duplicate it (and I'm hesitant to restore the config remotely, u...
-
- In your config somehow you managed to get both of them enabled. The DHCP settings for the LAN show it enabled, and th...
-
- Scrubbed config attached.
Sidenote: wasn't particularly thrilled to see my password stored in plaintext all over t... -
- The scrubbed backup would definitely help. The only way I can see this happening is if there was an interface at one ...
-
- I've never manually edited the config. For all intents and purposes, this is a relatively clean and simple config --...
-
- short of disabling the input validation or manually editing the config, that should be impossible. Do you have specif...
-
- Fixed the web server redirect rule (needed [QSA,NE]) and they work again.
-
- OK it isn't a PHP/pfSense problems, it's the web server's http->https redirect dropping them. If I change the links t...
-
- Some help page links are dropping certain characters. Specifically, in help.php, the link should go here:
https://... - 06:47 AM Revision 7825f71e: use (self) rather than any as the destination for the lockout rules
- 06:46 AM Revision b762e3dc: use (self) rather than any as the destination for the lockout rules
-
- both have been changed
-
- Afraid I don't understand what's been committed. This bug is about HTTPS, you changed this for SSH? What's the point ...
-
02:00 AM Bug #3246: automatic lockout rule too general and cannot be unarmed
- Thanks, that resolves my main concern.
-
- changed destination to (self) rather than any. The rest of the complaints aren't true or aren't valid. It's logged in...
10/03/2013
-
- Hello,
from release of 2.1 we have huge problems with intel 10Gb cards. as you can see in following forum topic (h... -
-
-
- Under Services > DHCP Server, I get the following message:
> The DHCP Server can only be enabled on interfaces con...
10/02/2013
-
02:11 PM pfSense Packages Bug #3248 (Resolved): NUT package fails to write config to upsd.users
- The configuration driver for the NUT package is testing obsolete variable "allowaddr" in order to determine if it sho...
-
- fix pkg_edit.php to show interface description instead of interface name
-
11:41 AM Revision f82cbe49: fix pkg_edit.php to show interface description instead of interface name
- 05:03 AM Revision 634054cc: Check for disabled OpenVPN instances in openvpn_resync_if_needed
- It is much cleaner if we check first for disabled OpenVPN instances, before diving into all the other checks. Note, t...
10/01/2013
-
- Is that a joke ? The lockout system is bugged (I explained how) and the antilockout cannot be used to reset that lock...
-
- WHat do you expect it to do, its protecting the system!
BTW, it has an antilockout by default as well.
Also available in: Atom