Activity
From 01/15/2013 to 02/13/2013
02/13/2013
- 11:50 PM Revision 965c3e23: Deal correct with bitmask for ipv6 on destination, same we did for src. If fixes #2451
- 11:00 PM Revision f1a831b8: Restore require_once(interfaces.inc) on get_configured_ip_addresses(), it's required by get_interface_ip()
-
10:54 PM Feature #1668 (Closed): OpenVPN Client Export support Tunnelblick
- Just tested this and the current beta (didn't test the release) imported an "Other" type Inline config without any fu...
-
10:40 PM Revision a1e4e2a7: Two interfaces, carp, ip aliases might be on the same subnet as their parent. What needs to be checked is the ip itself
-
10:08 PM Revision 72f25519: Refine the test for Ticket #2451 to check for aliases as well
-
09:58 PM Revision c7ada974: Remove dead code
-
09:58 PM Revision 1b584e3f: During bootup do not try to resolve hostnames filterdns will handle those
-
08:55 PM Revision bddd2be8: Add a knob in the GUI to set the RADIUS authentication timeout. Previous default was 3s, new is 5s. When using two-factor auth via external (e.g. phone), this needs to be set much higher, 60-120.
-
08:31 PM Revision bcb165e6: Merge pull request #416 from bcyrill/dyndns_p1
- Update dyndns service and widget
-
08:17 PM Revision ab4ce295: Update dyndns service and widget
-
07:49 PM Revision 11b26a27: unset var so the test works correctly
-
07:30 PM Revision 30b32e73: Merge pull request #415 from bcyrill/patch-3
- Add additional dyndns hosts to widget
-
07:21 PM Revision f1c6cac8: Add additional dyndns hosts to widget
- In 2.1 support for HE.net Tunnelbroker, SelfHost, Route 53 and Custom entries has been added.
- 07:19 PM Revision 72711980: Warn users that nosync option won't prevent it to be overwritten on carp slave members
- 07:19 PM Revision a1fb7d61: Fully sync filter and nat sections. Fixes #2362
-
06:56 PM Revision 837a3536: Properly configure allowed hostnames
-
06:49 PM Revision 13e64b47: Remove interfaces that have been unselected from CP config properly
-
06:30 PM Revision e6d5af4b: Call rc.firmware for propper platform during manual upgrade
-
06:19 PM Revision 22ef0a3d: mwexec_bg() already uses nohup
-
06:19 PM Revision 77daff18: Use full path to nohup
-
06:19 PM Revision fba1804f: Assign the output of exec to a var to avoid any issues
-
05:50 PM Bug #2451 (Feedback): IPv6 rule: 'add network' becomes 'add single host'
- Applied in changeset commit:965c3e23a60f25d263389bf02b685bb7f20f3915.
-
05:31 PM Bug #2451: IPv6 rule: 'add network' becomes 'add single host'
- OK it works correctly in the source box, but not the destination box.
-
05:00 PM Bug #2451: IPv6 rule: 'add network' becomes 'add single host'
- I couldn't reproduce it here. When I back to edit rule it's set as network and bitmask 32.
-
03:31 PM Bug #2451 (New): IPv6 rule: 'add network' becomes 'add single host'
- It's partially fixed but not 100%
If I enter 2a00:1450:: in a firewall rule as a network with a mask of /32 (which... -
07:10 AM Bug #2451 (Feedback): IPv6 rule: 'add network' becomes 'add single host'
- Applied in changeset commit:cb2b59b89b4d7fb6449c0f45d142302dd2029373.
-
05:34 PM Revision 87613be4: Merge pull request #414 from phil-davis/master
- Correct filename for dyndns widget cached ip
-
05:32 PM Bug #1629: invalid state table entries after WAN IP change
- Ermal, testing this feature on a pfsense box with a WAN interface that gets via DHCP an IP in a /24 subnet (i.e. it's...
-
09:58 AM Bug #1629: invalid state table entries after WAN IP change
- Thanks, it works with my VoIP device now. The states get killed correctly.
- 05:26 PM Revision 3d72df58: Correct filename for dyndns widget cached ip
-
03:26 PM pfSense Packages Feature #2736 (Resolved): Additional configuration options for SMTP, POP3 and IMAP Pre-Processors in snort.conf
-
03:19 PM pfSense Packages Feature #2736: Additional configuration options for SMTP, POP3 and IMAP Pre-Processors in snort.conf
- This can be closed. These were incorporated in the other changes included in subsequent Pull Requests via Github.
-
03:26 PM pfSense Packages Feature #2735 (Resolved): Improvement to Snort Rules Update Process
- ok, thanks again!
-
03:20 PM pfSense Packages Feature #2735: Improvement to Snort Rules Update Process
- Yep. These, too, were part of the larger set of PulL Requests done in late Janaury and early February. This reqest ...
-
02:49 PM Bug #2627: Old delegated prefixes are not removed from the LAN interface
- I will wait for the updated snapshot. In the meantime I went on to disable the DHCPv6 client on the WAN interface (IP...
-
02:19 PM Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Can you gitsync and try again, or wait for the next new snap? It may be that the last snap doesn't have the changes i...
-
02:17 PM Bug #2627: Old delegated prefixes are not removed from the LAN interface
- Running this build:
2.1-BETA1 (amd64)
built on Tue Feb 12 10:20:45 EST 2013
FreeBSD 8.3-RELEASE-p5
Whenever the WAN ... -
01:20 PM Bug #2362 (Feedback): Deleting last/only port forward doesn't remove from secondary
- Applied in changeset commit:a1fb7d61c4be90e6b6fcbc44fd644677cb0761e4.
-
09:43 AM Bug #2362: Deleting last/only port forward doesn't remove from secondary
- Same happens for last/only filter rule. I'm working on a solution.
- 01:06 PM Revision cb2b59b8: Deal correct with /32 subnet mask for ipv6 addresses. If fixes #2451
- 12:31 PM Revision 96ccd009: Fix indent and whitespaces
-
08:36 AM Feature #1979: Allow user-defined rules to utilize built-in system aliases
- Not sure we'd need much in the way of port aliases. We already have a ton of ports in the drop-down list on firewall ...
-
08:26 AM Feature #1979: Allow user-defined rules to utilize built-in system aliases
- as with anything else - when someone's willing to pay for it, or someone does it and submits a merge request.
-
08:21 AM Feature #1979: Allow user-defined rules to utilize built-in system aliases
- I'd like to push things a bit since this would really help a lot.
Jim P wrote:
> Some ideas:
> * Local Networks
... -
08:23 AM Bug #2756: SNMPD problems when binding pppoe interface
- I figured out that every time my ISP reconnect me snmpd stop working that's why it wont start from the beginning also...
-
07:44 AM Revision 2e267635: Merge pull request #413 from stan-qaz/master
- Dynamic DNS status widget for use on the Status Dashboard
- 07:14 AM Revision 81fe3f5e: Make a Dynamic DNS status widget available for use on the Status Dashboard page. See forum toipic: http://forum.pfsense.org/index.php/topic,58278.msg312146.html#msg312146 for the discussion on this.
-
06:34 AM Feature #2815: Anonymizing the config during export on the backup page
- We already do that for the copy included on /status.php, though the function needs updated since it needs to also cle...
-
01:48 AM Feature #2815 (Resolved): Anonymizing the config during export on the backup page
- It would be nice to be able to scramble sensitive data of the config of a box to easy the process for reporting issue...
-
03:27 AM Feature #1883: Diag > Limiter Info presentation enhancement
- probably not
- 02:24 AM Revision 16634530: Merge pull request #412 from phil-davis/master
- Say goodbye to routed at bootup
- 02:19 AM Revision 78514535: Say goodbye to routed at bootup
- Now that routed/RIP has been removed from the base system, it generates errors trying to start it in the base system ...
-
01:32 AM Bug #2675 (Feedback): /tmp/.rc.prunecaptiveportal.running can be present on boot
- Patch has been pushed that corrects this by ignoring alock if it has been created for more than 2 minutes(2 runs of p...
02/12/2013
-
11:47 PM Bug #2636: state mismatch issue on enc0 with amd64
- on the one system of ours that was having this issue, it's better than it used to be (it used to be impossible to com...
-
10:38 AM Bug #2636: state mismatch issue on enc0 with amd64
- By any chance you have net.inet.ipsec.filtertunnel set to something grater than 0?
-
09:56 PM Revision 1d2add88: Fix page name. Fixes #2813
-
09:49 PM Revision d5a2c099: Merge pull request #411 from bcyrill/patch-2
- Remove duplicate $ipsecpinghosts variable
-
09:22 PM Revision d6d775a6: Fix page name. Fixes #2640
-
09:03 PM Revision a0ad97f2: Remove redundant variable
-
08:35 PM Revision f5b89c39: Merge pull request #410 from bcyrill/patch-1
- Update etc/inc/services.inc
-
08:28 PM Revision f8edf05d: Fix these tests, they will never succeed the way we set these variables using the old test. Fixes #1987
-
08:24 PM Revision 60214e06: Update etc/inc/services.inc
- Fix path to chmod
-
08:18 PM Revision 100f3e71: Resolves #1284. Merge patch submitted a bit differentely
-
07:52 PM Revision 60754bef: Merge pull request #409 from miken32/nas-identifier
- add input validation for NAS-Identifier
-
07:17 PM Revision 89b1c40c: add input validation for NAS-Identifier
-
07:15 PM Bug #2362: Deleting last/only port forward doesn't remove from secondary
- Yeah it does as of Friday's snapshot at least.
-
02:57 PM Bug #2362: Deleting last/only port forward doesn't remove from secondary
- Does this still happen on 2.1? I thought I fixed all of these not too long ago.
-
07:01 PM Revision bde982dd: Declare $config as global before interactive PHP shell command evaluation. Fixes #808
-
06:27 PM Todo #2814 (Closed): OpenVPN push route hint on configuration page is misleading
- we can't document everything in the web interface, that's just an example of one of hundreds of potential options the...
-
06:14 PM Todo #2814 (Closed): OpenVPN push route hint on configuration page is misleading
- On the OpenVPN server configuration page it says:...
-
05:27 PM Revision eac52376: Do the syslogd restart unconditionally. It happens on IPv4 as well as IPv6. See http://forum.pfsense.org/index.php/topic,58345.0.html
-
05:18 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- I already know the answer after thinking about it. Only if the hidden rule used match would the route-to stack onto ...
-
03:31 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- As an update. The out rule in floating that I listed does disable the hidden route to.route-to.
I found the mista... -
03:26 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- Strange. I am seeing inconsistency with this or I am going crazy and making a bunch of mistakes testing this (I am s...
-
03:22 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
!!!! Hold up... !!!!
The above rule did cancel the route-to it seems. Sorry about that, I messed up the test. ...-
03:14 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- I didn't think it was possible to override it. I just tested it and could not override it.
You can not create an ... - 04:38 PM Revision ad885a63: Remove RIP from menu
-
04:00 PM Bug #2813: Diagnostics: S.M.A.R.T. Monitor Tools
- Applied in changeset commit:1d2add88f4222b04708a1a1af38567ab197a460a.
-
03:46 PM Bug #2813 (Feedback): Diagnostics: S.M.A.R.T. Monitor Tools
- Fixed by commit:d6d775a6b51fedc4044497ca9af526a31df6d687
-
02:49 PM Bug #2813 (Resolved): Diagnostics: S.M.A.R.T. Monitor Tools
- diag_smart.php
Perform Self Tests
Click abort
directs to smartmon.php
which is 404 - Not Found -
03:45 PM Feature #2640: Add a way to find where an alias is used
- That commit ID was for another ticket (sorry)
-
03:30 PM Feature #2640: Add a way to find where an alias is used
- I agree there is a workaround, but it would be very nice to have it in the GUI. This saves a lot of time when I'm on...
-
03:30 PM Feature #2640 (Feedback): Add a way to find where an alias is used
- Applied in changeset commit:d6d775a6b51fedc4044497ca9af526a31df6d687.
-
03:18 PM Feature #2640: Add a way to find where an alias is used
- Easier way: download a config backup and grep/search it.
Not sure how feasible this would be in the GUI, given the... -
03:44 PM Bug #2752 (Feedback): Captive Portal Last Activity isn't update anymore --> idle timeout just after login
- Please try a 2.0.3 image, this appears to be one of the bugs addressed there:
http://forum.pfsense.org/index.php/top... -
03:43 PM Feature #2757 (New): CDP/ISDP/LLDP support.
- Whoops, added that note to the wrong ticket.
-
03:37 PM Feature #2757 (Closed): CDP/ISDP/LLDP support.
- Please try a 2.0.3 image, this appears to be one of the bugs addressed there:
http://forum.pfsense.org/index.php/top... -
03:42 PM Bug #2812: Adding a one way phase 2 IPSec tunnel causes a config error
- Attach your /var/etc/racoon.conf (or /var/etc/ipsec/racoon.conf on 2.1 ) and the ipsec section of your config.xml wit...
-
09:14 AM Bug #2812 (Rejected): Adding a one way phase 2 IPSec tunnel causes a config error
- Hi
I have a current IPSec tunnel that is working great.
I tried to add a second and third that is one way (loca... -
03:40 PM Feature #2801 (Rejected): Display (all) PHP logs in the Web UI
- On 2.1 (where development is typically done) these do show on the dashboard as a crash report, so they can be viewed ...
-
03:36 PM Bug #2754: PPP and 3G: Setting PIN in advanced options not working, stick works after removing SIM PIN
- Might be the same issue as #781
-
03:35 PM Bug #2748 (Feedback): Route53 DynDNS Updater does not work
- Will need a lot more detail. Any log messages from the system log for starters.
The route53 code was contributed, ... -
03:33 PM pfSense Packages Feature #2736 (Feedback): Additional configuration options for SMTP, POP3 and IMAP Pre-Processors in snort.conf
- Have these changes already been merged in by pull requests?
-
03:33 PM pfSense Packages Feature #2735 (Feedback): Improvement to Snort Rules Update Process
- Have these changes already been merged in by pull requests? They look familiar.
-
03:27 PM pfSense Packages Bug #2698 (Feedback): freeradius2 counter not working
-
03:26 PM pfSense Packages Bug #2681 (Closed): Squid 3 in pfsense 2.1 Beta
-
03:24 PM Bug #2680 (Rejected): PHP Fatal error in /tmp/PHP_errors.log
- Without more detail and no other reports, this is not likely legitimate.
-
03:16 PM Bug #2627 (Feedback): Old delegated prefixes are not removed from the LAN interface
- Can you try this again on a recent 2.1 snapshot? Several changes to prefix delegation have happened recently.
-
03:14 PM Feature #2609: Support for ActiveDNS
- Can you submit those changes as a github pull request please?
https://help.github.com/articles/using-pull-requests
... -
03:09 PM Bug #2578: Upgrade 1.2.3 to 2.0 CARP
- Do you happen to have a copy of your config from before and after this upgrade to compare? You can e-mail it in if yo...
-
03:07 PM Bug #2570 (Closed): Status: Interfaces - Fatal error: Call to undefined function filter_configure()
-
03:07 PM Bug #2550 (Rejected): Cannot delete limiters...
- Duplicate of 2482
-
03:06 PM Feature #2523: Prompt for confirmation before upgrading to different architecture
- Not that it's specifically addressing the need for a prompt, but I recently made the manifest drop-down bold the choi...
-
03:05 PM Bug #2451: IPv6 rule: 'add network' becomes 'add single host'
- This is probably due to an old check for the CIDR being /32 meaning single IP, but that test should not be applied on...
-
03:03 PM Bug #2432 (Closed): OpenVPN Client Specific Override ifconfig-push
-
02:56 PM Bug #2374 (Feedback): When entering values in firewall rules leading and trailing spaces are not deleted
- Fixed by commit on this ticket but not marked as fixed.
-
02:53 PM Bug #2307 (Closed): OpenNTP fails to update time at bootup
- We have switched to the ntp.org daemon now, this is no longer relevant.
-
02:52 PM Bug #2297 (Closed): Inbound NAT on secondary WAN Interface when Primary Interface has no carrier
- Probably this is due to the lack of a default gateway. Enable gateway switching under System > Advanced on the Misc t...
-
02:45 PM Bug #2288 (Closed): Traffic Graph slows network processing
- That's just a side effect of using the GUI. The more things that are open and checking in the GUI, the more resources...
-
02:43 PM Feature #1933: Support for interface groups in NAT screens
- You would have to split the user rule(s) with respective reply-to.
-
02:05 PM Feature #1933: Support for interface groups in NAT screens
- Outbound NAT might be feasible but for port forwards this could be problematic as the group rules wouldn't get reply-...
-
02:43 PM pfSense Packages Bug #2256 (Feedback): FreeRadius not starting
- Many changes to the package since then, is this still a problem?
-
02:36 PM Bug #2166 (Feedback): Dynamic DNS not updating
- Can this still be reproduced on 2.1?
-
02:34 PM Feature #2083 (Closed): Auth : LDAP users and group object.
- Should be fixed by the "Extended Query" box in 2.1
-
02:31 PM Bug #2056 (Feedback): Display error in captive portal admin screen
- Does this still happen on 2.1? I see a few possibly related commits that may have fixed this.
-
02:30 PM Bug #1987 (Feedback): GRE tunnel - Route search type
- Applied in changeset pfsense:commit:f8edf05d872f8887b891f15b48aa694a94ed2f9e.
-
02:27 PM Feature #2003 (Closed): Allow Aliases in routing
- Added a while ago. In at least 2.1.
-
02:26 PM pfSense Packages Bug #2002 (Closed): snort
-
02:20 PM Bug #1284 (Feedback): Syslog does not work with CLOG disabled
- Applied in changeset commit:100f3e7191a0c720857316c4ba0cac0890fe8177.
-
02:17 PM Bug #1981 (Closed): lighttpd errorlog using text rather than clog format
- Lighty logs to syslog now, so this isn't relevant any longer.
-
02:15 PM Bug #1969 (Feedback): IPsec refuses connection after first Cisco Client connection
- Worth trying again on a recent 2.1, and keep the recent edits to the recommending settings for mobile IPsec in mind f...
-
02:13 PM Bug #1959 (Feedback): openssl does not accept ECC-certificates
- On 2.1 we use OpenSSL 1.0.1e (or later) so it's worth trying again there.
-
02:05 PM Bug #1915: LDAP "authentication containers" select button is inoperative.
- This works, at least on 2.1 and recent 2.0.x's. It displays for me, and I've used it with customers recently as well.
-
02:03 PM Bug #1909 (Feedback): dhcp dies after reboot
- There was some work to solve a similar issue with ordering and aliases on 2.1 recently, worth trying there, it's like...
-
02:02 PM pfSense Packages Bug #1908 (Closed): Vnstat
-
02:01 PM pfSense Packages Bug #1907 (Closed): snort
-
01:58 PM Feature #1878 (Closed): Option to add permanent ARP entries for WOL
- There is a per-mapping static ARP option for DHCP entries now, which should fill this need.
-
01:57 PM Bug #1861 (Closed): false log filterdns: host_dns: failed looking up "88.192.1250.131"
- This has been cleaned up a bit since then but some is expected behavior. Anything that's supposed to be an IP but isn...
-
01:54 PM Feature #1855 (Feedback): NAT before IPsec VPN
- This has been done on 2.1 for a couple months now and confirmed to be working there.
-
01:53 PM pfSense Packages Bug #1852 (Closed): Snort and IP-Block Installation/Deintsallation issue
- As Chris said, it will be OK on 2.1. No easy fix until then.
-
01:51 PM pfSense Packages Bug #1822 (Closed): Snort won't start
-
01:49 PM Bug #1739 (Closed): Interface problem
- Fixed at some point, the key length is retained now even when input validation gives errors.
-
01:47 PM Bug #1722 (Closed): Associated filter rule retains original Interface option after copying a NAT rule
- This was fixed a while back, I've done this recently and it works.
- 01:45 PM Revision d94eb904: Preselect interface subnet mask for carp interfaces
-
01:45 PM Bug #1691 (Closed): Virtio driver not working
- virtio was fixed up a while ago, check the forum/wiki for info.
-
01:43 PM Bug #1686 (Closed): guiconfig.inc GetText logical bug
- Appears to have been fixed.
-
01:43 PM Bug #1681: OpenVPN tun IPs fail HTTP REFERER checks
- This gets annoying when trying to help customers fix up broken OpenVPN routing, we should fix this sooner rather than...
-
01:40 PM pfSense Packages Bug #1651 (Closed): Removing Squidgard removes squid
- Should be better on 2.1
-
01:36 PM Bug #1375 (Closed): Captive portal logs: mixed with logs from other sources (squid, php)
- Logs changed a lot since then, it's likely been fixed. Can reopen if a new report on 2.1 surfaces.
-
01:36 PM Bug #1414 (Closed): dhclient fail on wifi
- Replaced by #2440 (better info there)
-
01:33 PM pfSense Packages Todo #1551: OLSR Version update
- Moving back to packages since this is no longer built in.
-
01:29 PM Bug #1332 (Closed): Autoupdate erases line in /etc/sysctl.conf which was created by LiveCD
- Important tunables like that are in the GUI now, not sysctl.conf
-
01:25 PM pfSense Packages Bug #1315 (Closed): ERROR 404 on packages area upper-left logo of psense.
- Fixed long ago
-
01:24 PM pfSense Packages Bug #1301 (Closed): Squid package become unusable through time if we use large disk cache
- Package was changed long ago to not do chown on the cache any longer.
-
01:23 PM Bug #1290 (Closed): IPsec roadwarrior use case: Traffic from LAN does not hit established tunnel
- Sounds like one of the other IPsec mobile bugs that was fixed long ago (check other tickets).
-
01:22 PM Feature #1286 (Closed): Captive Portal sends WAN IP instead of Mac or custom string in "called-station-id" RADIUS attribute
- Captive Portal gained this feature some time ago.
-
01:17 PM pfSense Packages Bug #1272 (Closed): AXFR Zone transfers not working in v2 Beta5
-
01:16 PM pfSense Packages Bug #1245 (Closed): barnyard2 won't start
-
01:16 PM Bug #1226 (Closed): Possible DOS in CARP synchronization
- This has, in all likelihood, been fixed since then. The behavior would at least have changed on 2.1 after the recent ...
-
01:13 PM pfSense Packages Bug #1200 (Closed): Navigational link in Shellcmd package broken
- Fixed long ago
-
01:13 PM pfSense Packages Bug #1199 (Closed): Navigational link in Backup package broken
- Fixed long ago.
-
01:09 PM pfSense Packages Bug #1163 (Rejected): Squid not restart in widget
-
01:02 PM Feature #983: Improve/Enhance IP Alias VIP handling in GUI
- They are included in automatic outbound NAT now, but not the interface macro.
-
01:00 PM Bug #808 (Feedback): PHP Shell - $config doesn't work but $GLOBALS["config"] does.
- Applied in changeset commit:bde982dd5aad41254273300676d1d5c2ecf367c3.
-
12:53 PM pfSense Packages Bug #679 (Closed): HAVP error message shows up behind top menu.
- 12:50 PM Revision e9389ae8: Remove RIP since it's a package again. See ticket #648
-
12:49 PM Bug #415 (Closed): DNS forwarder domain override add doesn't restart dnsmasq
- Fixed long ago on 2.x
-
12:47 PM pfSense Packages Bug #310 (Closed): Nut needs changes for latest version
- This was fixed up a while ago.
-
12:46 PM Feature #264 (Closed): More flexible DHCP - Static ARP
- On 2.1, DHCP static mappings now have a checkbox to setup a static arp entry for that IP. Should be close enough to t...
-
12:45 PM Feature #2319: include SSD TRIM option in installer
- This can now be set manually after the install on 2.1.
touch /root/TRIM_set; /etc/rc.reboot
to remove
touch ... -
12:44 PM Bug #23 (Closed): Links broken on sub-folders due to relative paths
- We have been prefixing the paths with / for a while now on 2.1 (and earlier?)
-
12:43 PM Feature #197 (Closed): [PATCH] dns service: alias option for DNS forwarder
- An alias feature was implemented a while back on 2.1
-
12:36 PM Feature #1883: Diag > Limiter Info presentation enhancement
- Should we give this a target for 2.1?
-
12:11 PM Bug #2756: SNMPD problems when binding pppoe interface
- hmm its hard to test it on another machine i will do a complete new install of the system next week and i try to inst...
-
12:04 PM Bug #2756: SNMPD problems when binding pppoe interface
- It seems to be a local issue instead of a bug on pfSense since there are no other users reporting the same issue and ...
-
12:06 PM Bug #2790 (Resolved): Gateways widget broken for IPv6
-
12:01 PM Revision 096f2962: Ticket #1629 Another round of fixes related to state clearing
-
11:47 AM Todo #648 (Closed): Move "base" packages such as RIP, OLSR, etc, back into packages
-
06:53 AM Todo #648 (Feedback): Move "base" packages such as RIP, OLSR, etc, back into packages
-
11:47 AM Bug #2810 (Resolved): Move RIP back to a package
-
06:50 AM Bug #2810 (Feedback): Move RIP back to a package
- Applied in changeset pfsense-packages:commit:849ae9e3bd2877bfb784b88b10d41dc772127f2a.
-
06:45 AM Bug #2810 (Resolved): Move RIP back to a package
- RIP needs to be moved back to a package
- 11:26 AM Revision 443c2822: Fix indent and whitespaces
- 11:07 AM Revision 8184a8dd: Check if file exists before try to read it. Fixes #2764
- 11:02 AM Revision c2173267: Fix indent and whitespaces
-
09:20 AM pfSense Packages Bug #2807 (Closed): filter_rules_needed tag (in package xml) not used when generating rules
- That is a remenant of another implementation for packages.
The only way for now is to use the directly callable func... -
08:59 AM Revision cef32994: Correct value extaction
-
08:56 AM Revision ec0ed17a: Merge pull request #406 from miken32/nas-identifier
- Support for custom NAS-Identifier
-
08:54 AM Revision 044c5682: Merge pull request #408 from mdima/master
- Status Queue page: Fixes the bytes/bits unit in the page.
-
07:55 AM pfSense Packages Bug #2811 (Closed): squidGuard-1.4_4 starting large number of child processes
- You will have better luck opening a forum thread on the packages board to diagnose this. certainly needs a lot more d...
-
07:51 AM pfSense Packages Bug #2811 (Closed): squidGuard-1.4_4 starting large number of child processes
- when i installed squidguard from the pkg, this time it reinstalled squid. i enabled the squid guard, in few minutes i...
-
06:55 AM Revision b06abfe3: Status Queue page: Fixes the bytes/bits unit in the page.
-
05:26 AM Bug #1629: invalid state table entries after WAN IP change
- I just pushed another change to reset states with certain gateways set.
It should behave even better than previously,... -
05:10 AM Bug #2764 (Feedback): Captive Portal Voucher Sync issue
- Applied in changeset commit:8184a8ddbb5c92cf3b01806c7a4f6172c95c7ed3.
- 04:39 AM Revision 39866b68: Merge pull request #407 from jean-m-cyr/master
- Make sure ntpd creates a pid file at bootup
- 03:01 AM Revision a82de14d: Make sure ntpd creates ntpd.pid file at bootup
-
02:57 AM Feature #1482: Captive Portal support for a configurable RADIUS NAS ID
- Merged thank you for the pull request.
02/11/2013
-
10:35 PM Revision f9dc100c: fix typo
-
10:15 PM Revision d7fe2e7a: properly separate accounting options from general RADIUS options
- cleanup whitespace
- 08:35 PM Revision e6c60013: Check interfaces and VIP IP address overlap
- - Check if interface IP overlaps other interfaces or localip from mpd
based services
- Check if VIPs IP overlaps in... -
07:03 PM Revision ef844583: Use the actual openvpn restart routine when starting/stopping from services rather than killing/restarting manually.
-
07:00 PM Revision 4cc94535: allow entry of custom NAS ID
-
07:00 PM Revision 07c132f9: check for configured NAS ID otherwise use default hostname
-
06:59 PM Revision eb162790: remove unsed getNasID function
-
06:50 PM Revision 699125b1: Use the actual openvpn restart routine when starting/stopping from services rather than killing/restarting manually.
-
05:51 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- it's always been optional, users can override with floating rules. It's an appropriate default for the vast majority.
-
11:27 AM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- Can this be an option? I actually consider it a feature. I don't want policy routing at all. I change routing on t...
-
04:38 PM Feature #1482: Captive Portal support for a configurable RADIUS NAS ID
- Submitted: https://github.com/bsdperimeter/pfsense/pull/406
-
05:32 AM Feature #1482: Captive Portal support for a configurable RADIUS NAS ID
- Please send a pull request on github as everyone else since its easier to merge/review/...
-
02:48 PM Revision ee3576dd: Commit missed global
-
02:40 PM Todo #1723 (Feedback): PPTPd and all mpd based services need more checks
- Applied in changeset commit:e6c60013283ea203853e0bc34158e185016f4df6.
-
02:05 PM Revision 9a03bc19: Bump latest_config to 9.4 to match recent version bump in the default config.
-
02:02 PM Revision 33a33c3e: Use the same tcpdump command here that we use from the GUI, to avoid potential mismatch of info/errors.
-
11:16 AM Revision 1a1967d6: Test that timeout value is bigger than 0
-
11:05 AM Revision 8135f01f: If more than 2 minutes have passed from the prunning process ignore the lock
-
11:03 AM Revision b9f66770: If more than 2 minutes have passed from the prunning process ignore the lock
-
10:56 AM Revision b16d70eb: Test that timeout value is bigger than 0
-
10:35 AM Revision 21d1560f: Make this code readble
-
10:19 AM Revision 8ac9dd5e: Optimize get_real_itnerface to avoid a loop of doing a convertion from real back to friendly when the inforamtion is there already
-
09:44 AM Revision 25f27029: Enter missed text needed
-
09:42 AM Revision ec8b4d8d: Try to use standard interface to find the source for connecting a tunnel. Also if a ping host is defined for the configuration used that for remoteid since its known to be reachble
-
09:29 AM Revision d83045b5: Properly generate all address data based on configuration selected
-
09:20 AM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- I can confirm that this patch did not break vlan support as it did 8 months ago.
I had to completely rebuild my p... -
09:18 AM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- So can you confirm it works correctly now?
-
09:15 AM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Please ignore my reported troubles, see http://forum.pfsense.org/index.php/topic,58717.0.html for an explanation.
... -
09:13 AM Revision 2ffafea3: Make function return correct address info for respective family
-
08:21 AM Revision d6c82882: Use full path to commands
-
08:20 AM Revision bb58ed63: Cleanup some code
-
05:21 AM pfSense Packages Bug #2809 (Closed): Reverse Proxy for ActiveSync / Real-Time Monitor
- Real-Time Monitor and the access.log for the Reverse Proxy package do not show the full request URI (it is cut off af...
-
03:11 AM Bug #1629: invalid state table entries after WAN IP change
- Today the problem occurred again. So it was not fixed yet.
-
02:14 AM Revision c4680ae2: Whoops remove copypasta
-
02:10 AM Revision 84197cec: Apparently some systems don't like pulling this in globally, but it should work if defined locally like the other similar lists.
-
02:08 AM Revision 3289b42b: The actual variable isn't an array, so this test will never succeed. Remove it. Unbreaks ntp.
-
01:53 AM Feature #2757: CDP/ISDP/LLDP support.
- Any chance to see this feature implemented in 2.1?
02/10/2013
-
10:08 PM Revision 51edea83: Merge pull request #404 from phil-davis/master
- Do not allow 1:2:3:4:5:6:7:8::9 as an IPv6 address
- 09:38 PM Revision 7405845f: Do not allow 1:2:3:4:5:6:7:8::9 as an IPv6 address
- The Net_IPv6 code has a bug - checkIPv6 returns "true" for addresses like:
1::2:3:4:5:6:7:8:9
1:2::3:4:5:6:7:8:9
...
... -
07:51 PM Revision 016655d9: Merge pull request #403 from bcyrill/patch-20
- Update usr/local/www/system_crlmanager.php
-
07:31 PM Revision d5059f4c: Update usr/local/www/system_crlmanager.php
- Cleanup HTML
-
07:28 PM Revision 53cfd2d6: Merge pull request #402 from bcyrill/patch-19
- Update usr/local/www/system_certmanager.php
-
07:27 PM Revision c1d1844a: Update usr/local/www/system_certmanager.php
- Cleanup HTML
-
07:27 PM Revision 874c659c: Merge pull request #400 from bcyrill/patch-16
- Update usr/local/www/system_camanager.php
- 07:23 PM Revision 88be5178: Merge pull request #401 from phil-davis/master
- Fix login form username field focus
-
07:20 PM Revision 39530c89: Update usr/local/www/system_camanager.php
- Cleanup HTML
- 07:19 PM Revision 1b209514: Fix login form username field focus
- The Username filed was no longer getting focus - just a missing "/" in a critical place.
-
05:44 PM Revision 3dd08924: Merge pull request #399 from phil-davis/master
- Validate IP address explicitly as v4 and v6
- 05:40 PM Revision 85e9cfee: Validate interface IP explicitly as v4 or v6
- The IP Address fields on the Interfaces Edit page were just using is_ipaddr to validate them. I could put an IPv4 add...
-
05:35 PM Bug #2806 (Feedback): General setup: Error when changing system DNS Server
- This should already be fixed in the repo and on the snap dated today.
-
05:13 AM Bug #2806 (Closed): General setup: Error when changing system DNS Server
- Crash report begins. Anonymous machine information:
i386
8.3-RELEASE-p5
FreeBSD 8.3-RELEASE-p5 #0: Sun Feb 10 0... -
05:18 PM Revision c1df78f2: Merge pull request #398 from phil-davis/master
- Display Gateway Widget column headings only once
- 03:08 PM Revision 2ae26abd: Display Gateway Widget column headings only once
- The Gateway Widget format was changed recently to allow display of a long IPv6 address. It has made the widget take a...
-
12:22 PM Revision eb233919: Make sure the directory exists
-
11:47 AM Revision 1c903aa4: Small fixes to make code readble and error log more useful
-
11:38 AM Bug #2808 (Rejected): OpenVPN client config with pkcs12 gets duplicated IP of client with ca,cert,key
- Please start a forum thread and gather more information before opening a ticket.
I've never observed this happenin... -
11:31 AM Bug #2808 (Rejected): OpenVPN client config with pkcs12 gets duplicated IP of client with ca,cert,key
- Hi.
I'm installing pfSense in 6 servers and connecting them with OpenVPN SSL/TLS. I ended up with a problem discus... -
11:26 AM Revision 6a205b6a: Sprinkle some unsets
-
11:26 AM Revision 9d595f6a: Correct setting default gateways
-
11:13 AM Revision df40755d: Correct function name
-
09:34 AM Feature #1482: Captive Portal support for a configurable RADIUS NAS ID
- I'd like to see the 2.1 patch get in there. Richard.
-
09:05 AM pfSense Packages Bug #2807 (Closed): filter_rules_needed tag (in package xml) not used when generating rules
- The XML tag 'filter_rules_needed' is stored in the $config['installedpackages']['package'][$pkgid]['filter_rule_funct...
-
08:44 AM Bug #1629: invalid state table entries after WAN IP change
- This problem also affects me. I’ve upgraded to Snapshot "built on Sat Feb 9 23:46:16 EST 2013". I will look for the p...
-
08:28 AM Bug #2647: rc.newwanip discovers wrong WAN IP when using DHCP
- long time no see.
updated to 2.1-BETA1 (i386) - built on Sun Jan 27 20:33:23 EST 2013
we have still got the same ...
02/09/2013
-
11:17 PM Revision ccb5fb15: Merge pull request #397 from N0YB/PowerD_AC_BAT_Modes
- Upgrade code & config default version
- 11:04 PM Revision 6015f75b: Upgrade code & config default version
-
09:17 PM Revision b9f29f84: Use mwexec() with signal clearing. Use pid file for killining/tracking ntpd
-
08:47 PM Revision b61306fb: Merge pull request #396 from N0YB/PowerD_AC_BAT_Modes
- Update config default with powerd battery mode
- 08:41 PM Revision 91d1736f: Update config default with powerd battery mode
-
08:25 PM Revision 3084ba6e: Teach dhcpd_configure about family optional parameter and use it to properly setup dhcpv6 on track6 case so that config is properly written
-
04:27 PM Revision 3a2de75a: Add some newlines to this one too.
-
04:22 PM Revision 8c59ce01: Unbreak firewall rule interface drop-down selection. Fixes #2805
-
02:55 PM Revision 6387590f: Actually do restart radvd and dhcp6d on all track6 interfaces
-
02:23 PM Revision 82b50e76: Use posix_kill here
-
02:17 PM Revision e082d2f4: Restart dhcp and radvd on change
-
01:25 PM Revision 681a493f: Actually for SLAAC type interfaces being tracked the configuration is needed
-
01:23 PM Revision 7a41d737: Revert "Remove track6 dhcp configuration since dhcp6 will do this for us."
- This reverts commit 6ebfa0ccfd7db500a4f85d2d45ebd74699a8805f.
-
01:12 PM Revision 6ebfa0cc: Remove track6 dhcp configuration since dhcp6 will do this for us.
-
12:41 PM Bug #2728: PPP WAN types do not obtain DNS servers properly in 2.0.2-RELEASE
- mount root filesystem rw (on embedded systems) using ...
-
12:26 PM Revision 20e15197: Remove this old code
-
10:30 AM Bug #2805 (Feedback): Firewall Rules Interface select causes javascript error
- Applied in changeset commit:8c59ce016bb2035d42568a1ada096e7835dea2e4.
-
09:36 AM Revision f934af33: Optimize and cleanup routing function
-
09:26 AM Revision 8be135cd: Correct system_routing_configure to do the right thing and guess the address family for the routing table correctly. While here cleanup some other code and leave a comment that disabled routing entries probably should not be dealt in here!
-
08:49 AM Revision aeaf0a67: Set family here to avoid any ambiguity
-
01:40 AM Revision 82cc8a36: Merge pull request #395 from N0YB/PowerD_AC_BAT_Modes
- System: Advanced: Miscellaneous: PowerD
- 01:09 AM Revision a358eec2: System: Advanced: Miscellaneous: PowerD
- Add the on battery mode option settings.
-
12:21 AM Revision a06edef6: Merge pull request #394 from bcyrill/patch-15
- Update usr/local/www/system_certmanager.php
-
12:10 AM Revision 3065c8cd: Update usr/local/www/system_certmanager.php
- Add space between option's value and selected attributes. Get rid of some stray closing td tags. That's it for now.
-
12:01 AM Revision 39bb6f81: Merge pull request #393 from bcyrill/patch-14
- Update usr/local/www/system_camanager.php
02/08/2013
-
11:59 PM Revision 9eac43d7: Update usr/local/www/system_camanager.php
- Properly close the anchor tag and fix ampersand.
-
11:46 PM Revision a20adcd1: Merge pull request #392 from bcyrill/patch-13
- Update usr/local/www/system_certmanager.php
-
11:45 PM Revision f0664ac7: Update usr/local/www/system_certmanager.php
- Add $userid check
-
10:22 PM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Chris Ogden wrote:
> I am not getting the driver does not support altq error but I can't ping across my vlans anymor... -
09:52 PM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- I am not getting the driver does not support altq error but I can't ping across my vlans anymore. Devices on each vla...
-
09:37 PM Bug #2805 (Resolved): Firewall Rules Interface select causes javascript error
- On the latest snapshot (built on Fri Feb 8 17:16:16 EST 2013) when I go to my firewall rules, I can't select a differ...
-
09:07 PM Revision 34bf3512: Fix fallback monitor selection
-
08:56 PM Revision 25d0e8c3: Fix fallback pool monitor selection.
-
08:02 PM Revision 05387675: Restart ntpd a little differently, seems to stabilize it when restarted from rc.newwanip
-
04:56 PM Feature #385: Allow the use of Captive Portal to restrict services on the firewall itself.
- Has there been any more activity on this feature request? I would love to use pfSense with the described functionalit...
-
03:06 PM Bug #2798: Captive Portal does not capture anyone
- The clients listed in there were from before I saved the rules. Any new people connecting through the CP don't get ...
-
03:03 PM Bug #2798: Captive Portal does not capture anyone
- ...
-
08:41 AM Bug #2756: SNMPD problems when binding pppoe interface
- yes i use the snapshot from today
after boot the service wont start
but the worst problem is after a while it j... -
08:38 AM Bug #2756: SNMPD problems when binding pppoe interface
- I couldn't find anything wrong on your config and couldn't reproduce it locally. Let me just ask you some questions t...
-
07:18 AM Bug #2756: SNMPD problems when binding pppoe interface
- send u an email
-
05:01 AM Bug #2756: SNMPD problems when binding pppoe interface
- Can you post your config.xml here or send it direct to me (garga@pfsense.org)?
-
04:26 AM Bug #2756: SNMPD problems when binding pppoe interface
- after restart the service doesn't start
-
06:28 AM Todo #1723 (New): PPTPd and all mpd based services need more checks
- It's not done yet, need to check the other way. If you try to set the same IP used on localip for mpd based as a stat...
-
06:23 AM Bug #2306 (Resolved): USB ports show up as network interfaces
-
05:12 AM Bug #2789: Bug with DHCPD, with the last upgrade from 2.1
- Are you using a recent snapshot?
Does this problem happen only when you configure it or during the boot too?
Is dhc... -
02:07 AM Bug #2803: igmp version reset
- Additional info: this morning I rebooted pfSense and after several hours tried to open the stream. igmp v3 appeared a...
02/07/2013
- 11:48 PM Revision 8981761b: Revert "Require util.inc necessary for sigkillbypid()"
- This reverts commit 1b7ec6ba16af4559e6e66cc1b378e8701a9df0b6.
-
11:31 PM Revision 3fe5080c: Correctly set the mtu of the interface during configuration. Since for interfaces that are clonable previously the mtu was set than the interface destroy so the operation was useles. While here correct check for vlan interfaces.
-
11:18 PM Bug #2789: Bug with DHCPD, with the last upgrade from 2.1
- Hello,
Ihave the same problème .
Do you want to enable the DHCP server on LAN? [y|n] y
Enter the start address... -
10:01 PM Bug #2803: igmp version reset
- Here is an excerpt from the system.log for that small period:...
-
04:54 PM Bug #2803: igmp version reset
- More information is needed here rather than this.
Some packet traces and system logs would be useful.
Debugging log... -
12:48 PM Bug #2803: igmp version reset
- There is additional package installed - udpxy, which translates http requests into udp multicast (www.udpxy.com):
# ... -
12:45 PM Bug #2803 (Resolved): igmp version reset
- Version 2.0.2-RELEASE (i386)
built on Fri Dec 7 16:30:38 EST 2012
FreeBSD 8.1-RELEASE-p13
"net.inet.igmp.defaul... -
08:45 PM Revision dfac167c: Correct mtu for track interfaces as well. Aslo cleanup some code
-
07:11 PM Revision 48f273cb: Correct function name
-
06:28 PM Revision 8707707e: Add a line break to move this text to the next line. It was stuck after another field and easy to miss.
-
05:05 PM Bug #2441 (Closed): Setting up a new PPP interface (3g) hangs the webUI
- Duplicate of #2433
-
05:02 PM Bug #2798: Captive Portal does not capture anyone
- IS this an issue or not?
If yes, provide input when you reproduce this with ipfw -x $zone show, ipfw -x $zone table ... - 04:48 PM Revision 1b7ec6ba: Require util.inc necessary for sigkillbypid()
-
04:43 PM Bug #2475 (Feedback): Connection rate limiting does not work for Captive Portal
- This should work better on 2.0.3 and later.
-
03:40 PM Bug #2349: vlan(4) needs altq adaption on FreeBSD 8.3++
- Applied in changeset pfsense-tools:commit:b983c67530b9d8beaf6d37d9a1d842b68ff24bba.
-
03:38 PM Bug #2349 (Feedback): vlan(4) needs altq adaption on FreeBSD 8.3++
- Patch has been committed and will be present on newer snapshots.
-
03:19 PM Revision de895285: Don't generate a PHP error for an unfetchable XML file.
-
02:51 PM Revision fb6c8051: Fix quoting.
-
02:44 PM Revision 133bda76: This is quoted that way because it's passed in javascript. If another better way to quote it works, feel free to change it back, but test the fix first and make sure aliases still display in the firewall rule list.
-
02:32 PM Revision 7cba1f57: Merge pull request #391 from ExolonDX/branch_06
- Remove escaped apostrophe
-
01:34 PM Bug #2804: firewall_rules.php
- thank you
-
01:33 PM Bug #2804 (Feedback): firewall_rules.php
- Already fixed in the repo, wait for new snapshots and test.
-
01:29 PM Bug #2804: firewall_rules.php
- RULES are not working anymore also
-
01:27 PM Bug #2804 (Resolved): firewall_rules.php
- After adding an EasyRule BlockHostsLAN
all Alias fields look like this
see attachment
- 01:15 PM Revision a8cb0038: Implement privilege for allowing login through CP
- - The feature is optional, on by default for new zones, off for current
ones when upgrading
It should fix #1010 - 01:15 PM Revision 060bc78b: Indent and whitespaces changes
- 01:15 PM Revision a0629b69: Indent and whitespaces changes
- 01:08 PM Revision b5ce1d01: Remove escaped apostrophe
-
01:07 PM Bug #2756: SNMPD problems when binding pppoe interface
- ok i did it
php test_snmpd.php without error
so i will let u know after 24h
thanks -
11:08 AM Bug #2756: SNMPD problems when binding pppoe interface
- The commit commit:1b7ec6ba16 should address this. Could you make this change to services.inc and test it again?
-
11:01 AM Bug #2756: SNMPD problems when binding pppoe interface
- that is the output :
Fatal error: Call to undefined function sigkillbypid() in /etc/inc/services.inc on line 1633
... -
10:45 AM Bug #2756: SNMPD problems when binding pppoe interface
- Could you please create a file called test_snmpd.php with the following content:...
-
10:28 AM Bug #2756: SNMPD problems when binding pppoe interface
- still the same problem after reboot it wont start, i have to start it manual
2.1-BETA1 (i386)
built on Wed Fe... -
10:15 AM Bug #2756: SNMPD problems when binding pppoe interface
- You still have same problems or it's a different one?
-
09:35 AM Bug #2756: SNMPD problems when binding pppoe interface
- snmp doesnt even work right data for pppoe and some vlan interfaces are not available ! even after re install with o...
-
01:01 PM Revision f5cdf056: Merge pull request #390 from ExolonDX/branch_05
- Value in attributes should be lower case
- 12:44 PM Revision 3ae16b9b: Value in attributes should be lower case
- Value in the "method" attribute should be lower case
- 10:31 AM Revision c2373b69: Merge pull request #387 from ExolonDX/branch_02
- Update HTML code in "include" files
- 10:28 AM Revision 0ff5ea76: Cosmetic change, s/manager/Manager/ to keep make it consistent with other entries
-
09:46 AM Revision 83a12422: Correct name of function call and use directly its return value as its boolean as needed. Also correct the function to be more readble and put a note for v4 checks that might be needed
-
09:46 AM Revision 88cc00db: Make gen_subnetv6 return a compressed form IPv6 address/net representation. This removes some issues reported during Ticket #2746 and solve the issue on some cases
-
07:20 AM Feature #1010 (Feedback): Privilege setting for allowing login access through captive portal
- Applied in changeset commit:a8cb003844c8feda083925415d9cfc96d5f3827f.
-
06:39 AM Bug #2746: IPv6 IPSEC shows down but is actually not...
- I also committed a couple fixes yesterday that made it work for more situations. It was working if you entered the su...
-
03:52 AM Bug #2746: IPv6 IPSEC shows down but is actually not...
- I pushed some fixes for exactly the issue you mentioned Andre.
-
06:03 AM Feature #2802: Add Test button/feature to LDAP Authentication Servers settings
- (Actually, the page I found was /system_usermanager_settings_test.php?authserver=UCS which even shows me the PHP Warn...
-
05:58 AM Feature #2802: Add Test button/feature to LDAP Authentication Servers settings
- I just found this page myself by grepping through the PHP code. I would never have looked there based on the setting...
-
05:54 AM Feature #2802 (Closed): Add Test button/feature to LDAP Authentication Servers settings
- Diag>Auth is there that does just this.
-
05:45 AM Feature #2802 (Closed): Add Test button/feature to LDAP Authentication Servers settings
- I'm currently debugging LDAP authentication for OpenVPN and doing so is quite convoluted; currently I went down to th...
-
05:38 AM Feature #2801 (Rejected): Display (all) PHP logs in the Web UI
- I am currently debugging PHP authentication for OpenVPN and when running the script from the shell I got a PHP Warnin...
-
05:16 AM Bug #2800 (Resolved): OpenVPN doesn't work properly with intermediate/chained CAs
- There are two places where working with chained certificates is broken or at least weird. Background: OpenVPN alway...
-
04:37 AM Bug #319 (Feedback): system_usermanager privilege not working as expected
- The original problem described in this ticket is fixed in 2.1. About the other change you are requesting, please open...
-
03:18 AM Bug #2613 (Resolved): Incoming traffic on a vlan is not seen
- Thank you for the reply.
-
03:10 AM Bug #2613: Incoming traffic on a vlan is not seen
- Yes,
It's working as expected. -
02:50 AM Bug #2613: Incoming traffic on a vlan is not seen
- Can this be confirmed as solved?
-
12:38 AM Revision d7a1532b: Only include files that actually end in .inc, otherwise patching can lead to errors since .inc.orig patched the old test.
-
12:36 AM Revision f7352cd8: Merge pull request #389 from ExolonDX/branch_06
- Update HTML code in "include" files
02/06/2013
- 11:41 PM Revision f326b978: Update HTML code in "include" files
- Close BR, INPUT and IMG tabs, update the IMG tags with "alt" and update
the TABLE tags with "summary".
Update SCRIPT... -
10:23 PM Revision 94395d86: Need to rethink this again
- Revert "Ticket #2636 Seems ipsec apart IP-IP does not have any after processing for input packets. Make the filter ap...
-
08:03 PM Revision d6e569ae: Actually let xmlrpc construct the url internally from the passed info it is doing same checks
-
08:02 PM Revision 472c5dc9: Revert "Correct URL creation for xmlrpc as well as some error checking"
- This reverts commit 9ea2463a5b982dff170d7e081b896ca79de19ad7.
-
08:01 PM Revision 89ad9390: Actually let xmlrpc construct the url internally from the passed info it is doing same checks
-
07:57 PM Revision 9ea2463a: Correct URL creation for xmlrpc as well as some error checking
-
07:49 PM Revision 90df43c6: Avoid possible deadlock during voucher xmlrpc sync and correct url generation for xmlrpc
-
07:46 PM Revision d06b30ea: Correct url creation for xmlrpc. Fix lock order with voucher expire. Bring from master fixes for exec_php xmlrpc code generation
-
07:38 PM Revision b36c115f: When going through the xmlrpc calls do not hold the lock since deadlock might occur.
- 07:27 PM Revision 52593da5: Update HTML in "include" files
- Udated the DOCTYPE to make it W3C standard/compliant.
Moved "sorttable.js", "ticker.js" and the "antiClickJack style... - 06:21 PM Revision 45843479: Merge pull request #385 from ExolonDX/branch_01
- Update HTML boolean operator "nowrap"
- 05:54 PM Revision cba9d7d9: Adjust RRD captive portal graphs for CP zones
- - Create RRD configs per zone
- Add tabs to see graphs per zone
- Migrate existing rrd files to default cpZone
- Whil... - 05:54 PM Revision 2e19a683: Adjust backup settings to new captive portal zones
- 05:54 PM Revision 5e5d5abc: Fix indent and whitespaces
-
05:14 PM Revision 3ec026a4: Fix IPsec status when using interface macros (e.g. "LAN subnet") and handle matching better when IPs may not match up due to IPv6 formatting/compression.
-
02:45 PM Revision 27daf27e: Merge pull request #386 from bcyrill/patch-12
- Update etc/inc/dyndns.class
-
02:35 PM Revision bb9ccd63: Update etc/inc/dyndns.class
- Resolves #2677
-
02:10 PM Revision 72b4a1e8: This message can be really spammy on a failure if you have multiple gateway groups. Disable e-mail notification of this message for now.
- If the e-mail actually made it out, at least one of the gateways must still be up...
-
01:43 PM Feature #1388: 3G outbound failover connection with auto dial-up and hang-up
- Its wery need future. I live in Ukraine, main conection is ADSL. Sometimes conection down. I wood like to use reserve...
-
01:20 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- I have a different opinion:
Acct-Status-Type indicates when a user is stating a service (start) or is ending a servi... -
01:12 PM Revision 86147528: Merge pull request #384 from bcyrill/ifip_v6
- Add IPv6 support to diag_ipsec.php connect button
- 01:04 PM Revision bb046a4f: Update HTML boolean operator "nowrap"
- The HTML boolean operator "nowrap" has been deprecated to a "style" and
it's "butt ugly", IMHO.
So, add a new class ... -
12:56 PM Bug #2789: Bug with DHCPD, with the last upgrade from 2.1
- That is something really strange since dhcpd is the responsible to sabe pid there.
Could you please try to kill an... -
12:45 PM Bug #2796 (Closed): PHP error on status_upnp.php
-
12:45 PM Bug #2795 (Closed): PHP Error on pkg_edit.php
-
12:00 PM Bug #2655 (Feedback): RRD Graphs for Captive Portal not working
- Applied in changeset commit:cba9d7d9a5edd4d2b49768a536740b288da99300.
-
11:38 AM Revision bd92ede8: IPv6 subnet check
-
11:06 AM Revision dbea91b3: Add check_subnetsv6_overlap()
-
11:04 AM Bug #2798: Captive Portal does not capture anyone
- I just removed and readded my v6 gateway and LAN then did a reboot and its working.
-
10:26 AM Bug #2798: Captive Portal does not capture anyone
- I also looked through the other CP bugs and fixes and noticed that I didn't have net.link.ether.ipfw and net.inet.ip....
-
09:54 AM Bug #2798: Captive Portal does not capture anyone
- Can you attach a copy of your config.xml with the broken configuration?
You can remove passwords, keys, etc. Mostly ... -
09:52 AM Bug #2798 (Closed): Captive Portal does not capture anyone
- While testing the snapshot of Feb 5th, 2013, I noticed that the captive portal is not capturing anyone after removing...
-
10:21 AM Revision 6b207f73: find_virtual_ip_alias() add IPv6 support
-
10:12 AM Revision 614be051: Add IPv6 support to diag_ipsec.php connect button
-
09:51 AM Revision 2027b4c7: find_ip_interface() add IPv6 support
-
08:50 AM Bug #2677 (Feedback): Dyndns debug file written with ascii string \n instead of line-feed
- Applied in changeset commit:bb9ccd636ee9331064319d202f80409280a22934.
-
08:40 AM Bug #2669 (Resolved): Captive portal: missing / in redirect URL
-
08:38 AM Bug #2669: Captive portal: missing / in redirect URL
- This has been fixed some time ago and does not occur anymore.
-
07:54 AM Bug #2797 (Feedback): IPsec "connect" button does not work for IPv6
- Looks like it should be fixed by this:
https://github.com/bsdperimeter/pfsense/compare/0715ad5093...8614752831 -
07:10 AM Bug #1629: invalid state table entries after WAN IP change
- Does not work, sorry. Only the "Out" states are flushed. The "In" states persist and seem to remember their gateway. ...
-
12:27 AM Revision 0715ad50: If the user has IPv6 disabled, don't create dynamic IPv6 gateways.
02/05/2013
-
11:39 PM Revision 68e5a9e9: Merge pull request #382 from mdima/master
- "Status-Queue" page: many interface improvements
-
11:23 PM Revision ff3003df: "Status-Queue" page: many interface improvements
- Add many improvements:
- Each queue background has a different color depending on the level
- Improved the number for... -
08:30 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- I would suggest any RADIUS server that can't work with interim update packets is not one worth using. They have been ...
-
01:59 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- The rlm_counter module is just counting on accounting stop packets. This module is used for time based accounting. It...
-
07:39 PM Revision e0f338eb: Ticket #2636 Seems ipsec apart IP-IP does not have any after processing for input packets. Make the filter apropriately so the packets are passed correctly through BPF and pfil(9)
-
07:01 PM Revision e80601a2: Protect from cases when the ipv4 might be missing on the interface for any reason
-
06:52 PM Revision 52b166c9: Correct setting protocol for generated rules
-
06:47 PM Revision c65eef01: Only allow gateways of the appropriate type (ipv4 or ipv6) to affect whether a gateway is marked as default, otherwise you can end up with an ipv4 gateway marked as default for ipv6 and the gui just shows "default".
-
06:33 PM Revision f73e3531: Fixes #2598. In case the rule is both for v4 and v6 generate 2 rules for each family. This is the _only_ solution for now
-
05:33 PM Bug #2797 (Resolved): IPsec "connect" button does not work for IPv6
- The connect button on the IPsec status page tries to determine a source IP on the firewall from which to send a ping ...
-
05:29 PM Bug #2793 (Resolved): Snapshot built from today's (Feb 4th) code is unstable, goes into panic loop.
-
08:31 AM Bug #2793 (Feedback): Snapshot built from today's (Feb 4th) code is unstable, goes into panic loop.
- Patch has been corrected behaviour should be better.
-
04:12 PM Revision e141ea70: Use global var for path
-
04:07 PM Revision 7b2c22a9: Unlink pid file before starting a new process
-
04:05 PM Revision fe2eb995: Unlink pid file before starting a new process
-
04:04 PM Revision a11bc497: Unlink pid file before starting a new process
- 02:42 PM Revision 69893205: Merge pull request #378 from phil-lavin/bugfix-php-errors
- Fix PHP errors relating to using string offset as an array
- 02:31 PM Revision 80d5bd41: Fix PHP errors relating to using string offset as an array
- 02:30 PM Revision 613a3cc5: For reloadall on interface_configure() called by GUI
- 02:30 PM Revision 733829a9: When IP is not set, the field doesn't have the value 'none', use empty() to check instead
-
01:51 PM Bug #2762: PF drops IPv6 packets with fragment header followed by a last fragment only
- This is scrub in action.
Will see how to make this behave normally. -
01:39 PM Bug #2636 (Feedback): state mismatch issue on enc0 with amd64
- A fix to require correct mask was submitted on master.
-
01:29 PM Revision 506c6bee: Test var before using as array. Should fix #2794
-
01:28 PM Revision d2b2872a: Test var before using as array. Should fix #2794
-
01:10 PM Feature #1482: Captive Portal support for a configurable RADIUS NAS ID
- Seems the patch I submitted has disappeared; if there is still interest I will submit a pull request at github.com to...
-
01:06 PM Revision fd5c4305: Merge pull request #377 from bcyrill/fix_lagg
- Fix valid interface check on interfaces_lagg_edit.php
-
12:40 PM Bug #2598: reply-to on IPv4+6 rules breaks v6
- Applied in changeset commit:f73e35319a7f36c761cadac132c2f3484103b88f.
-
12:36 PM Bug #2598 (Feedback): reply-to on IPv4+6 rules breaks v6
- Patch committed.
- 12:13 PM Revision ee132ba1: Change gateways widget layout to better accomodate long ipv6 addresses. It should fix #2790
-
11:46 AM Revision cdad45cd: Fix valid interface check on interfaces_lagg_edit.php
-
10:40 AM Bug #2792 (Feedback): pfSctl / check_reload_status can ignore linkup/linkdown events if they fire too fast.
- A patch has been committed which should improve the situation
- 10:11 AM Revision dd82d252: Fix whitespaces
- 10:10 AM Revision e1f9d058: Fix indent
-
08:43 AM Bug #2795 (Feedback): PHP Error on pkg_edit.php
- Pull request 378 merged
-
08:11 AM Bug #2795: PHP Error on pkg_edit.php
- Will do :)
-
08:08 AM Bug #2795: PHP Error on pkg_edit.php
- Can you submit these as pull requests on github since you have suggested (and presumably tested) the fixes? Less room...
-
07:56 AM Bug #2795 (Closed): PHP Error on pkg_edit.php
- Fatal error: Cannot use string offset as an array in /usr/local/www/pkg_edit.php on line 109
Error also exists on ... -
08:43 AM Bug #2796 (Feedback): PHP error on status_upnp.php
- Pull request 378 merged
-
08:07 AM Bug #2796 (Closed): PHP error on status_upnp.php
- Fatal error: Cannot use string offset as an array in /usr/local/www/status_upnp.php on line 66
Fix is to change li... -
07:45 AM Revision bef212d3: Merge pull request #376 from N0YB/DNS_Query_Forwarding_Options
- Services: DNS Forwarder
-
07:30 AM Bug #2794: PHP Error on NTP
- Applied in changeset commit:506c6bee8994ed17f16c56a5c7e2ed4085f76846.
-
07:30 AM Bug #2794 (Feedback): PHP Error on NTP
- Applied in changeset commit:d2b2872afa2e7d36c6cb7c30b8885cff8147985e.
-
02:25 AM Bug #2794 (Resolved): PHP Error on NTP
- Fatal error: Cannot use string offset as an array in /usr/local/www/services_ntpd.php on line 43
Caused by $config... -
06:42 AM Revision 96ea7162: Services: DNS Forwarder
- Add DNS query forwarding section with options for sequential and require domain.
-
06:20 AM Bug #2790 (Feedback): Gateways widget broken for IPv6
- Applied in changeset commit:ee132ba1db9cfa49b60a5f32e49ced29d366bf35.
-
12:15 AM Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- I have sent you the requested information.
02/04/2013
-
11:15 PM Bug #2793 (Resolved): Snapshot built from today's (Feb 4th) code is unstable, goes into panic loop.
- I can't get the VM to stay up long enough to capture or submit a full dump, but here is what I was able to get:
Ma... -
10:04 PM Revision f54712b6: Fix a couple JS errors/problems with OpenVPN server code.
-
05:50 PM Bug #2412: inbound 6to4 traffic does not work in pf
- I'm still seeing this issue with today's (Feb 4) snapshot. Using a comcast 6to4 tunnel.
Example test ping6 from ... - 04:54 PM Revision 56756d31: Fix add gateway validation on interface configuration. It should fix #2791
-
03:39 PM Revision 9239b1ce: Merge pull request #374 from bcyrill/patch-10
- Update usr/local/www/interfaces.php
-
03:04 PM Revision 8839e3fb: Update usr/local/www/interfaces.php
- Variables that equal FALSE are considered to be empty e.g. "0".
-
01:36 PM Revision b5b5bcc0: Make more strict checks during is_ip* functions. Helps http://forum.pfsense.org/index.php/topic,58399.0.html and http://forum.pfsense.org/index.php/topic,58273.0.html
- 01:17 PM Revision a75a49f6: Fix get_interface_subnetv6() for VIPs
-
12:12 PM Bug #2792: pfSctl / check_reload_status can ignore linkup/linkdown events if they fire too fast.
- This happens on RELENG_2_0 as well so we'll need to pull back the fix there as well if any pfSense code changes are r...
-
12:11 PM Bug #2792 (Resolved): pfSctl / check_reload_status can ignore linkup/linkdown events if they fire too fast.
- If an ethernet interface's link goes down and up too rapidly, the 'up' event sent by pfSctl ("linkup start") can be i...
-
11:00 AM Bug #2791 (Feedback): Validation glitch with gateways added from Interfaces > [Name]
- Applied in changeset commit:56756d31a2aebba3e15255129a339464f2699f3e.
-
09:13 AM Bug #2791 (Resolved): Validation glitch with gateways added from Interfaces > [Name]
- If you attempt to add a gateway from Interfaces > WAN and the gateway name already exists, an alert pops up telling t...
- 09:28 AM Revision 28994005: Merge pull request #370 from bcyrill/cp_patch2
- Fix problems with overlapping 'allowed IP subnets' / pipes in CP
- 09:26 AM Revision 0677741a: Merge pull request #371 from bcyrill/patch-18
- Fix filterdns termination
- 09:25 AM Revision 032c7245: Merge pull request #372 from miken32/reverseacct
- Allow RADIUS accounting to be reversed
- 08:46 AM Revision e3c4b024: Merge pull request #373 from phil-davis/master
- Make not LAN address etc rules work
-
08:45 AM Bug #1629: invalid state table entries after WAN IP change
- Check with later coming snapshot there was a problem with the patch that has been corrected.
-
08:25 AM Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- Can you show me what kind of rules you ahve configured on your OPT WAN?
Also the contents of /tmp/rules.debug and pf... -
07:10 AM Bug #2789: Bug with DHCPD, with the last upgrade from 2.1
- vi /var/dhcpd/var/run/dhcpd.pid :
ov-uu4
thank's -
03:20 AM Bug #2789 (Feedback): Bug with DHCPD, with the last upgrade from 2.1
-
03:20 AM Bug #2789: Bug with DHCPD, with the last upgrade from 2.1
- Could you please post here the content of /var/dhcpd/var/run/dhcpd.pid?
-
05:01 AM Bug #2790 (Resolved): Gateways widget broken for IPv6
- When a big IPv6 address is used, gateway column doesn't respect widget size, see attached picture.
- 04:15 AM Revision 2cd249ed: Make not LAN address etc rules work
- I cannot understand how this worked anywhere in the recent past. The code fragment:
if(isset($rule[$target]['not']))
... -
03:49 AM Feature #1009 (Feedback): Active Directory group membership checking
- Could you please send it in diff format or submit a Pull Request at github? It's hard to track exactly what changes y...
-
03:39 AM Bug #2614 (Closed): Scheduler bug - fires off on date not matched correctly
02/03/2013
-
06:40 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- I'm curious what the use case is for "start/stop accounting" at all?
Transparently restricting every session to 60... -
01:13 PM Feature #2143: Captive Portal - RADIUS - attribute: Acct-Terminate-Cause
- Pull request is still up to date, if there is any interest in checking it in.
-
08:15 AM Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- Unfortunately there's no change with today's snapshot.
2.1-BETA1 (amd64)
built on Sat Feb 2 21:38:38 EST 2013
Fr... -
05:15 AM Bug #1629: invalid state table entries after WAN IP change
- Does not work for me.
Correct me if I'm mistaken here, but can
@pfctl -i@
work without binding states to interface... -
02:36 AM Revision 990fa101: Add a means to force a fsck (on rare occasions the fs is not marked dirty, but still needs fsck run to fix errors)
-
02:30 AM Revision 2085c6de: Add a manual way for someone to set TRIM if they really want it. touch /root/TRIM_set and reboot to set, touch /root/TRIM_unset to clear.
- Have to reboot after setting the tunefs flag or when mount is run, it clears any changes. No way to do it on the fly.
-
12:53 AM Revision 8fd76a07: Merge pull request #369 from bcyrill/dyndns_rfc
- Gray-out disabled RFC2136 entries
-
12:53 AM Revision 38c5c7b8: Merge pull request #368 from bcyrill/dyndns_disable
- Gray-out disabled DynDNS entries
02/02/2013
-
08:35 PM Revision fe17da8a: Reconfigure allowed hostnames when deleting entries
-
08:22 PM Revision 7b5eab84: Kill filterdns when not being used
-
07:22 PM Revision f504b290: Fix problems with overlapping 'allowed IP subnets' in CP
-
05:19 PM Revision c02ef67f: Merge remote-tracking branch 'upstream/master' into reverseacct
-
01:29 PM Revision e5da6830: Gray-out disabled RFC2136 entries
-
01:24 PM Revision e766bd84: Whitespaces
-
01:10 PM Revision 51ce2ea7: Gray-out disabled DynDNS entries
-
12:56 PM Revision 5a39eb2b: Whitespaces
-
02:52 AM Revision 49b12e44: Merge pull request #367 from bcyrill/patch-8
- Add hw.usb.no_pf="1" to loader.conf on nanobsd
02/01/2013
-
11:25 PM Bug #2789 (Closed): Bug with DHCPD, with the last upgrade from 2.1
- DHCPD don't start. It try to start it but it not possible. tank's
Message : Disabling DHCPD...pgrep: Invalid pid i... -
11:22 PM Revision f48abba2: check for optional reversing of statistics
-
11:21 PM Revision 720498a0: checkbox to allow reversing of RADIUS accounting byte counts
-
09:58 PM Revision 3be7f5e7: Add hw.usb.no_pf="1" to loader.conf on nanobsd
-
09:21 PM Revision c5e48525: Merge pull request #366 from bcyrill/patch-5
- Correct IP family mix-up.
-
09:18 PM Revision 60037e00: Update usr/local/www/system_gateways_edit.php
- Correct IP family mix-up.
- 06:59 PM Revision 3d54aa10: Avoid killing apinger's rrdtool processes on kill_traffic_collector(). It helps a problem reported on comment of ticket #1399
-
05:40 PM Bug #2788: After a reboot the lan route have the false interface
- many thanks for your fast reply!
I do this
greatings from germany -
05:13 PM Bug #2788 (Rejected): After a reboot the lan route have the false interface
- this is very unlikely to be a bug, and is lacking required details to be a legit bug report. Please post to the forum...
-
03:22 PM Bug #2788 (Rejected): After a reboot the lan route have the false interface
- After Upgrading to the latest Beta1 Version the routing after reboot are a little bit confused.
My Environment (sh... - 04:02 PM Revision 48126e25: Avoid duplicate hw.usb_no_pf entry on loader.conf
- 03:57 PM Revision 25c088de: Hide usbus# from interfaces list. Fixes #2306
-
03:08 PM Revision 69efe7c6: Merge pull request #365 from phil-davis/master
- Allow clear package lock when 1st install fails
- 01:22 PM Revision 53bc1f38: Removed unused block of code
-
10:10 AM Bug #2306: USB ports show up as network interfaces
- Applied in changeset pfsense-tools:commit:4606f313f2c0a6e447dbf025821f24235669f883.
-
10:00 AM Bug #2306 (Feedback): USB ports show up as network interfaces
- Applied in changeset commit:25c088de57be43155d7f7df202f800016d5f515d.
- 07:19 AM Revision b3282172: Display only needed Reinstall and Clear Package Lock buttons
- Make the code a bit smarter, so the user only sees whichever of the reinstall and clear package lock buttons that are...
- 06:06 AM Revision e27953e7: Allow clear package lock when 1st install fails
- I upgraded a system this morning. An issue during the 1st package reinstall caused the package lock to be set, but no...
-
05:45 AM Bug #2626 (Resolved): Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
-
05:45 AM Bug #2763 (Closed): Dynamic Firewall logs doesn't add new rows
-
02:03 AM Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- You have to try a today snapshot or 31st one because that one does not have the patches applied.
01/31/2013
-
10:04 PM Revision 8f563bb4: Use the better -Fs modifies to pf to kill the states by interface. Also kill both sides on an interface when -k needs to be used
-
08:26 PM Revision b686e5d0: Load if_stf module if has not been done
- 04:31 PM Revision d1878053: Add missing parameter to interface_track6_configure() call
- 03:12 PM Revision 3d92cd88: Fix a typo
-
02:06 PM Revision ef1c048b: Do delayed handling of track6 interfaces a bit earlier. More thoughts need to be done on the track6 configuration
-
02:06 PM Revision ceba035a: Correct name as reported by phil-davis@github
-
01:53 PM Bug #2758 (New): Old configuration remains when changing interface type
- I spent some time debugging it and noted what is happening.
1. When interface_bring_down() is called and $ifcfgo i... -
12:07 PM Revision 9d99f69a: Merge pull request #364 from mdima/master
- Fix for links and PPS
-
12:01 PM Revision c4fc2eae: Destroy the stf interface to avoid issues with ipv6 interface assignment. Also delete any previous address on track6 interfaces before assigning a new one.
-
11:16 AM Revision 12aea7f1: Do not do any operation if its not necessary
-
11:07 AM Revision 7a04cd20: Create link_interface_to_track6 to make code more readble and easily trackble. Also improve the generation of rules to avoid creating problems during filter reload and some optimizations with it
-
10:47 AM Bug #2495 (Resolved): pfsense doesn't seem to know what its WAN IP is
- Alias address are being set before main address when IPv6 is set to Track, it is fixed now.
-
06:14 AM Bug #2495 (New): pfsense doesn't seem to know what its WAN IP is
- Reopen it since I could reproduce locally
-
08:08 AM Revision dd1fc379: Actually destroy in this case
-
08:07 AM Revision 4144aa81: Do the right thing here
-
08:07 AM Revision 6ba3121b: Fixes links and PPS
- This change fixes:
- Interface value in the links to the "Firewall: Traffic Shaper" page;
- Read the proper PPS value... - 06:00 AM Revision b0cde976: Merge pull request #363 from phil-davis/master
- Syntax error in vpn_pppoe.php
- 05:02 AM Revision 11d3a159: Syntax error in vpn_pppoe.php
-
02:12 AM Bug #2780: CP: passthough has no effect
- Sorry for the delay, here's the result:
[2.1-BETA1][root@pfsense.domain.local]/root(1): sysctl -a | grep net.link....
01/30/2013
-
08:13 PM Revision a9488104: Bring in the RCFILEPREFIX as constant fixes from HEAD, since otherwise rc.stop_packages was globbing in the wrong dir and executing the wrong scripts. Also seems to have fixed the "bad fd" error.
- 07:08 PM Revision 0a0b17d9: Avoid mpd based services to set localip to an already used IP on the system. It should fix #1723
- 07:08 PM Revision a1613b62: is_ipaddr_configured() now returns VIPS
- 07:08 PM Revision 2bbc5429: Fix indent
- 07:08 PM Revision 5fa78adc: Fix whitespaces and indent
-
07:06 PM Revision c11d666b: Merge pull request #362 from bcyrill/patch-4
- Adapt regex pattern for new stp interface naming
-
06:43 PM Revision 9cd6b950: Do more strict checks. Also silence some more log_error under debug. Also do some sanity checks on rc.newwanipv6 before doing any operation
-
05:30 PM Revision 1e8a05a2: Update etc/inc/interfaces.inc
- With the new support for multiple stf interfaces their names have changed. Adapt the regex pattern.
-
05:07 PM Revision e2a282a0: Put more checks here
-
05:07 PM Revision 7e86b57e: Oops correct interface name
-
03:22 PM Revision 23e3b2ad: Whitespace fixes
-
03:22 PM Revision 0acd271b: Change output style to follow halt.php and reboot.php so the shutdown output appears in the correct location on the page.
-
03:22 PM Revision 3942066c: Whitespace fixes
-
03:22 PM Revision 256a2a51: Change output style to follow halt.php and reboot.php so the shutdown output appears in the correct location on the page.
- Conflicts:
usr/local/www/diag_defaults.php -
02:23 PM Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- I tried with the latest build:
2.1-BETA1 (amd64)
built on Wed Jan 30 04:52:20 EST 2013
The bug is still present... -
04:21 AM Bug #2650 (Feedback): FTP helper breaks TCP sequence numbers on 2nd WAN
- Can you try with later snapshots.
This should be fixed. -
01:47 PM Revision 5ee79d32: Correct fetching ipv4 gateway by passing correct parameter
-
01:10 PM Todo #1723 (Feedback): PPTPd and all mpd based services need more checks
- Applied in changeset commit:0a0b17d90dd59ae1a743408bd0a67baa1f8f2ec9.
-
12:54 PM Bug #2414: IPv6 DHCP WAN, issue routing firewall-generated traffic
- At some point this was fixed or some other change fixed it, as it still shows /128 prefix but it works fully now. A r...
-
12:47 PM Bug #2414 (Feedback): IPv6 DHCP WAN, issue routing firewall-generated traffic
-
11:59 AM Revision b9688d64: Silence error. Maybe the command should be removed completely!
-
10:57 AM Revision c87f4b70: Fixes #1928. Disallow sync loop only for certain types of calls but not for exec_[php|shell]. Also fix CARP loop detection to use correct variable
-
10:43 AM Revision 311959fe: Ticket #2412. Also allow ipv6 traffic to flow on the stf interface
-
10:37 AM Revision 8dd9f19a: Ticket #2412 6to4 can come from any source. Also tighten rule that reply comes only to the dedicated interface for this rather than any other interface
-
10:31 AM Revision a6bc492f: Fixes #2674. Use the interface mtu rather than hardcoded 1280. Needs to be seen if issues with fragmentation can come from this on 6rd/6to4 tunnels
-
10:26 AM Revision 9eb49a51: pfctl -b is gone just use std tools of pfctl
-
09:05 AM Revision 31b958d5: Make this regular expression a little more specific so it does not kill the wrong wpa_supplicant if there are double-digit interface numbers.
- 08:41 AM Revision 6796d0d1: Merge pull request #361 from phil-davis/master
- Corrected cmd line for hostapd
- 08:20 AM Revision 97f3ce0f: Corrected cmd line for hostapd
-
08:03 AM Feature #2413 (Feedback): Allow IPv6 interface configuration from the menu
-
08:02 AM Revision a526f6a9: More unsets :)
-
07:59 AM Revision a606981e: Make smal fix
-
07:56 AM Revision 28f476fd: Merge pull request #360 from mdima/master
- Feature #2781: Hierarchical view of "Status-Queues" page
-
07:48 AM Revision 6d33b044: Revert "Use pid even for hostapd rather then trying to guess with regex"
- This reverts commit b73a96b68d1d4e919a268d2e8e3a6ec902709e6d.
-
07:44 AM Bug #2574 (Feedback): Failure of secondary radius server causes PPTP authentication to hang even if primary is working!
- Is this issue still happening on recent snapshots? I couldn't reproduce it here, it worked fine when both radius serv...
-
07:28 AM Bug #2756: SNMPD problems when binding pppoe interface
- Still the same ... maybe i should reinstall it ...
-
05:00 AM Bug #1928 (Feedback): Can't sync voucher database when carp peer is also active
- Applied in changeset commit:c87f4b709261187cb5e76accde933404d81868f2.
-
04:42 AM Bug #2412 (Feedback): inbound 6to4 traffic does not work in pf
- Can you test with latest snapshots and see if it behaves better?
-
04:31 AM Bug #2325 (Feedback): Limiters don't work on OPT WAN rules w/rdr
- This should be fixed by commit requiring that on floating rules you specify the gateway.
At least for 2.1 -
04:30 AM Bug #2674 (Feedback): MTU setting hardcoded 1280 for gif interfaces and in RADVD config
- Applied in changeset commit:a6bc492fecd64a3a9f3b4cc4a003d6761494a694.
-
04:23 AM Bug #1629 (Feedback): invalid state table entries after WAN IP change
- Ok i went and did another implementation fix for this.
Can you please try with later 2.1 snapshots and see if it beh...
01/29/2013
-
09:36 PM Revision 73eeee93: Feature #2781: Hierarchical view of "Status-Queues" page
- Second version of the new "Status-Queue" page.
Requires the pfsense-tools/pfPorts/qstats/files/stats.c file to be
rec... -
09:33 PM Revision a3eab908: Feature #2781: Hierarchical view of "Status-Queues" page
- First version of the new "Status-Queue" page.
Requires the pfsense-tools/pfPorts/qstats/files/stats.c file to be
reco... -
08:47 PM Revision 3fe15891: Use correct key. Be more strict while checking by suing v4 version for ipv4. Fixes: http://forum.pfsense.org/index.php/topic,58122.msg312024.html#msg312024
-
08:39 PM Revision fe5f2a3b: Merge pull request #358 from miken32/hp_bandwidth
- support HP RADIUS attributes for bandwidth limits and redirection URLs
-
08:37 PM Revision 21b94a54: Feature #2781: Hierarchical view of "Status-Queues" page
- First version of the new "Status-Queue" page.
Requires the pfsense-tools/pfPorts/qstats/files/stats.c file to be
reco... -
08:11 PM Revision fa2cd558: support HP RADIUS attributes for bandwidth, url, data quotas
-
07:42 PM Revision 97e0cb61: Use unset to free resources now that php does not use exit on CP
-
07:38 PM Revision 7d1f2eac: Use pfSense function where possible and rename stf0 to interface_stf to allow multiple instances of iot
-
07:38 PM Revision db6e6b1a: I am not sure why this is needed but for sure its not needed during bootup
- 07:23 PM Revision 366aaa50: Merge pull request #357 from miken32/empty_password
- Allow empty CP password to be sent to RADIUS server
-
06:59 PM Revision 16a0308d: allow empty CP password to be sent to RADIUS server
- 06:06 PM Revision cc6052f0: Initialize $a_pools to fix warnings when saving dhcp settings whith no extra pools
- 05:30 PM Revision 49b76122: Permit openvpn to use same port on different interfaces. It should fix #814
-
02:47 PM Bug #2786 (Resolved): Setting MTU on VLAN does not set MTU on parent interface in 2.2
- When altering the MTU on a VLAN, the physical interface needs to follow. Currently it does not, and you have to assig...
-
02:38 PM Feature #2785 (Closed): Support HP RADIUS attributes
- No need to submit both.
-
02:21 PM Feature #2785 (Closed): Support HP RADIUS attributes
- HP MSM series access controllers have vendor-specific attributes to control bandwidth and redirection URLs. Pull requ...
-
01:25 PM Bug #2377: Captive portal fails on empty RADIUS password
- Pull request 357 was merged.
-
01:12 PM Bug #2377: Captive portal fails on empty RADIUS password
- That pull request was not for this issue. Please see https://github.com/bsdperimeter/pfsense/pull/357 for the patch a...
- 01:19 PM Revision d12ae241: Fix wrong unset calls
-
11:30 AM Feature #814 (Feedback): GUI should allow to bind openvpn on different ip same port
- Applied in changeset commit:49b76122af0846474f65eaf73e0e879e24fb554c.
-
09:41 AM Feature #814: GUI should allow to bind openvpn on different ip same port
- This should be possible now but there is a new issue holding it back. Now that we can assign a gateway group as the "...
-
10:30 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- tried it still same, clients upload speed exceeds limiter values
-
10:19 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- yes its ticked, trying without that now but if we untick then i guess in the past there was a problem of traffic for ...
-
09:46 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- Can you try by removing the quick option on the match rules, if you have selected it?
-
03:52 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- plz remove post after u have read it
-
03:35 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- In that forum post i do not see any limiters configured on the ruleset posted.
So please provide the information if ... -
08:29 AM Bug #2784 (Closed): Bug with the interface LAN, with the last upgrade from 2.1
- Already fixed in the repo.
-
08:23 AM Bug #2784 (Closed): Bug with the interface LAN, with the last upgrade from 2.1
- This is the message :
Fatal error : call it undefined function unet () in /etc /inc/interfaces.inc on line 3321 -
08:22 AM Revision b8550718: Merge pull request #356 from phil-davis/master
- Document OpenVPN local and remote network list options
-
08:14 AM Revision cd54b9bc: Do not do double checks for this
-
08:10 AM Revision a823022d: Do not do so much work during boot since all interfaces will be called for configuration no need to go and find those. Also delay tracking interfaces during config to give a chance their parents to come up
- 07:56 AM Revision 3835613a: Document remote network lists in OpenVPN GUI
- Also, now the advanced route command is not needed. So change the example to the "remote" command, which can be usefu...
- 07:47 AM Revision 332f5781: Document local remote network lists in OpenVPN GUI
- The local and remote network fields can now have lists of CIDRs, so document this in the GUI.
-
07:39 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- 2.1-BETA1 (amd64)
built on Mon Jan 21 16:42:50 EST 2013
FreeBSD 8.3-RELEASE-p5
After unplugging then replugging ... -
04:54 AM Bug #2783 (Closed): Cannot access vouchers tab
-
04:43 AM Bug #2783: Cannot access vouchers tab
- I installed a newer build and really the problem disappeared;
Thanks -
03:14 AM Bug #2783 (Feedback): Cannot access vouchers tab
- Check later snapshots
01/28/2013
-
11:19 PM Bug #1575: Limiters are bypassed by local applications injecting rules
- this was discussed here
http://forum.pfsense.org/index.php/topic,56092.0.html
the easy way to test this is, enabl... -
09:14 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- Can you provide any analysis of how you do your checking?
Also provide a ... -
04:54 AM Bug #1575: Limiters are bypassed by local applications injecting rules
- does seem to work still, upnp devices bypass limiter
-
10:21 PM Revision b73a96b6: Use pid even for hostapd rather then trying to guess with regex
-
10:09 PM Revision e017a46a: If the interface is not enabled do not try to configure it
-
09:10 PM Revision b0059636: Make check more strong and readble. Also make dhcp6c use its pid file to make things easy
-
04:54 PM Bug #2783 (Closed): Cannot access vouchers tab
- After creating a new zone on LAN interface and set Auth to "Local Users", I click on "Vouchers" tab and it back to zo...
-
04:51 PM Revision 54285411: is_subnet() will fail here if using comma-separated lists of networks. Use openvpn_validate_cidr() instead.
-
04:49 PM Revision 8793cb1f: is_subnet() will fail here if using comma-separated lists of networks. Use openvpn_validate_cidr() instead.
-
03:02 PM Revision ee6bd11d: Add header to DHCP static mappings table
-
02:59 PM Revision f2ea45ef: Add header to DHCP and DHCPv6 static mappings tables
-
02:01 PM Revision af982472: Move the definition of negate_networks/vpn_networks to its place and re-include ipsec vpns in this tables since scrub for mss clamping need this.
- 01:30 PM Revision 84683e42: Fix rrd databases upgrade. Helps ticket #2651
- - Replace find that was being called with wrong parameters at
upgrade_054_to_055() and upgrade_080_to_081() by return... - 01:28 PM Revision a2219caf: Add option filter to return_dir_as_array()
- - Add a 2nd parameter, default empty, that allows to pass a regex to
filter files it'll return
- While I'm here, si... -
01:24 PM Bug #2780: CP: passthough has no effect
- I have the same problem using build Jan 28 08:16:34 EST 2013
Both net.link.ether.ipfw and net.inet.ip.fw.one_pass ... -
09:57 AM Bug #2780: CP: passthough has no effect
- Can you check the following sysctl values
net.link.ether.ipfw net.inet.ip.fw.one_pass
they should be 1 on both.
Als... -
08:20 AM Bug #2780: CP: passthough has no effect
- I've just tested snapshot Jan 27. MAC passthrough seems to be working fine, but Allowed IP addresses are not. Here's ...
-
10:21 AM Bug #1399: rrdtool respawning too fast
- Its internal to apinger and a 'protection'.
I will double check again to see if it can be fixed. -
09:10 AM Bug #2782: RIP needs to be multiwan capable
- when i enable RIP i get errors in system log when i have 2 WANs from same isp so the gateway is same which causes thi...
-
08:59 AM Bug #2782 (Rejected): RIP needs to be multiwan capable
- routing protocols like RIP aren't multi-WAN relevant, especially not as a bug.
-
04:59 AM Bug #2782 (Rejected): RIP needs to be multiwan capable
- RIP actually has the feature to be multiwan aware but pfsense needs some gui patches as well as some minor code chang...
-
08:39 AM Bug #2651 (Feedback): traffic RRDs broken after upgrade to 2.1
- There was a bug on functions that convert rrd databases to new format during upgrade. It was fixed and this fix shoul...
-
08:08 AM Feature #2781: Hierarchical view of "Status-Queues" page
- Of course! I wanted to receive some feedback on this idea before just doing/publishing it...
To make it work, I a... -
07:53 AM Feature #2781 (Feedback): Hierarchical view of "Status-Queues" page
- Hello Michele,
This is a good idea. Could you please do it and send a pull request on pfsense project at github [1... -
04:41 AM Feature #2781 (Resolved): Hierarchical view of "Status-Queues" page
- Hello,
I'd like to change a little bit the "Status-Queues" page, adding a "hierarchical" view in order to show ... -
03:54 AM Bug #2769 (Closed): IPsec needs IPv4/IPv6 input validation
-
03:53 AM Bug #2773 (Closed): DHCP pools need validated against other pools when saving
01/27/2013
-
10:39 PM Revision c848008b: Merge pull request #355 from bcyrill/cp_patch5
- Change order of cpzone check
-
09:57 PM Revision 6c18a810: Change order of cpzone check
-
07:55 PM Revision 349bf358: Display a list of ciphers accelerated by a specific engine. Also, skip engines that are listed but unavailable for direct use.
-
07:23 PM Revision be82765a: Merge pull request #353 from bcyrill/cp_patch3
- Add missing context parameter
-
07:00 PM Revision a9215a24: Add missing context parameter
-
06:04 PM Revision 9ab4af90: Merge pull request #352 from bcyrill/cp_deleteip
- Do not include prefix in IP address
-
05:53 PM Revision 7e3d78f2: Do not include prefix in IP address
-
05:20 PM Revision dae707f5: Fixup paths when executing OpenSSL.
-
04:42 PM Revision 0674bc42: Configure pipe directly in php until ipfw binary is fixed to correctly configure pipes even that context is specified
-
04:28 PM Revision 657d2c66: Configure pipe directly in php until ipfw binary is fixed to correctly configure pipes even that context is specified
-
04:13 PM Revision bbdb59de: Correct displaying of ipsec status for natted networks.
-
03:52 PM Revision ab873ccd: Catch up with code change. Pointy-hat: myself
-
03:46 PM Revision 029b377a: Remove missed line and also improve code for bridge cases
-
03:35 PM Revision 8d1f1034: Merge pull request #350 from bcyrill/cp_allowedip
- Fix ipfw config generation for allowed IPs
-
03:34 PM Revision 965ce4c6: Restore accidentally removed code. Spoted-by: bcyrill@github
-
02:46 PM Revision 1f8c8819: Fix ipfw config generation for allowed IPs
-
12:36 PM Revision 9d33c857: Merge pull request #349 from bcyrill/bridge_patch2
- Use unescaped variable in if condition
-
12:34 PM Revision 2626cbd1: Correct real interface assignment
-
12:24 PM Revision 792bdf7f: Use unescaped variable in if condition
-
10:51 AM Bug #2780 (Feedback): CP: passthough has no effect
- FIx has been included and should behave better in the later coming snapshots.
-
09:10 AM Bug #2780: CP: passthough has no effect
- The direction support has been removed in commit [1] but the "Allowed Hostnames" configuration still shows the form f...
-
09:06 AM Bug #2780: CP: passthough has no effect
- @Ermal:
It seems that when configuring pipes the context argument is not correctly handled.
ipfw -x guest pip... -
07:44 AM Bug #2780: CP: passthough has no effect
- Here's the result (wifi is the name of my CP zone)
[2.1-BETA1][root@pfsense.domain.local]/root(1): ipfw -x wifi sh... -
06:41 AM Bug #2780: CP: passthough has no effect
- Can you show ...
-
10:27 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- Also snapshots dated today or later contain ipsec-tools version 0.8.1, so it's worth trying again on a new snapshot. ...
-
10:19 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- You used teh suggestions from Jim especially disabling prefer old ipsec sa?
-
08:34 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- I am running into this issue on 2.1 BETA. I have tried all
Connecting the first time after restart of racoon wor... - 02:21 AM Revision 0b635fd6: Merge pull request #347 from bcyrill/bridge_edit
- Remove return value of interface_bridge_configure
- 02:20 AM Revision 7709c5a5: Merge pull request #348 from bcyrill/gif_patch1
- Re-add lost parenthesis
-
01:38 AM Revision 5b3bd46c: Re-add lost parenthesis
01/26/2013
-
10:58 PM Revision 0e0002c2: Remove return value of interface_bridge_configure
-
10:19 PM Revision 6d53bbb5: Correct another parameter passed to pfsense functions
- 09:54 PM Revision 690c4913: Merge pull request #345 from bcyrill/bridge_holdcnt
- Fix holdcount/holdcnt parameter confusion
-
09:37 PM Revision afd825a7: Fix holdcount/holdcnt parameter confusion
-
08:07 PM Revision c706080d: Link openssl config here to make the ports version of openssl happy when making certs.
-
08:04 PM Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Here is my raw config.xml & /tmp/rules.debug
http://m37offroading.ca/PFSENSE/config.xml
http://m37offroading.c... -
08:01 AM Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Robert Stefanovic wrote:
> Ok , So you know what. That's fine. You guy's dont think it's a bug.. It's pathetic PFSen... -
03:58 AM Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Ok , So you know what. That's fine. You guy's dont think it's a bug.. It's pathetic PFSense is the most powerful open...
-
06:10 PM pfSense Packages Bug #2698: freeradius2 counter not working
- http://redmine.pfsense.org/issues/2164
Can you check this ticket, read the last post of that ticket and the coresp... -
06:05 PM Bug #2164: Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- Hi,
users in the following two pfsense forum threads applied the patch from Ermal Luçi with success.
Adding the p... -
05:31 PM Bug #2780 (Resolved): CP: passthough has no effect
- I've just updated to Jan 25 snapshot (amd64) and passthrough (MAC or IP address) doesn't work anymore. It seems to ha...
-
04:37 PM Revision eaf87cb0: No need for escaping here since this is php internal functions
-
04:36 PM Revision 19defb88: No need for escaping here since this is php internal functions
-
03:55 PM Revision a216db0f: Add a note about rdr pass not supporting Multi-WAN.
-
03:55 PM Revision 88996fbe: Add a note about rdr pass not supporting Multi-WAN.
-
02:59 PM pfSense Packages Bug #2779 (Rejected): Snort unexpectedly terminates / signal 11 error
- PRobably because you are missing a gid.
please move this to forum. -
02:32 PM pfSense Packages Bug #2779 (Rejected): Snort unexpectedly terminates / signal 11 error
- Hello, It's not a hardware issue, I tested on several pc-s Intel and AMD processors, It seems to be a rule issue, Whe...
-
12:05 PM Revision 0fbf7315: Do not use array_keys uselessly
-
11:59 AM Revision abdd01f5: Correctly generate dhcpleases file to avoid issues with dhcpleases. Also while here correct code and make some optiomizations and corrections
-
08:19 AM Revision 7bb09580: Maintain the previous order of creating wireless interfaces at boot so additional virtual APs get the same generated MAC as before.
01/25/2013
-
09:41 PM Revision fb6079db: Try a little harder to find the protocol rather than giving up. Fixes #2751
-
09:07 PM Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Please discuss it on the forum until a developer confirms a bug exists.
You still could have a configuration issue... -
09:01 PM Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- I have had the exact same issue. So we already know it's multiple affected users.
The issue is in the default ro... -
08:44 PM Revision f3bddb47: Actually even earlier since lagg can have wireless ifaces as member or vlan can reside on top of them
-
08:44 PM Revision 348ce507: To avoid issues reported during bootup with wireless create clones early on bootup. Wireless can only have base interfaces and not clonable one so this should had been done since beggining.
-
08:34 PM Revision 4ce92461: Merge pull request #320 from bcyrill/patch2
- Allow empty RADIUS secrets
-
08:26 PM Revision 7ee0f3a8: Put outgoing policy routes even for the vips to correct sourced traffic from them. Fixes #1823
-
07:59 PM Revision 75201355: Return the full list of vips to help with #1823
-
07:41 PM Revision 23604cee: Merge pull request #343 from bcyrill/cp_conc
- Fix concurrent username logins
-
07:28 PM Revision 4586abb7: Fix concurrent username logins
- 05:16 PM Revision c251f8cc: Make synamic firewall logs and widget add new rows:
- The Dynamic Firewall Log page doesn't add rows, it only updates the php
generated rows which means that if it's loade... -
04:30 PM Bug #2555 (Feedback): check_reload_status consumes 100% CPU usage
- This seems occasional since not many have reported it.
-
04:30 PM Bug #2540: Table entries added by filterdns can clobber overlapping hardcoded entries during DNS changes
- Applied in changeset pfsense-tools:commit:6f436e9ddf46e64e9b6d87d587a63242b4063d0d.
-
04:29 PM Bug #2540 (Feedback): Table entries added by filterdns can clobber overlapping hardcoded entries during DNS changes
-
04:10 PM Bug #2751 (Feedback): IPv6 log for ICMP Router Solicitation identified as ICMP packets
- Applied in changeset commit:fb6079dbaf63aa994d8039788d60dac48eb99986.
-
03:07 PM Bug #2751: IPv6 log for ICMP Router Solicitation identified as ICMP packets
- If you could get the raw filter.log entries for these, that would be helpful in adjusting the parser to compensate.
-
02:46 PM Bug #2440 (Feedback): Wireless client nic set for DHCP does not start dhclient
-
02:45 PM Bug #2440: Wireless client nic set for DHCP does not start dhclient
- For bootup issues i pushed a fix to create the clone early.
For reconfigure it should not be an issue since interfac... -
02:46 PM Bug #2506 (Resolved): filterdns needs help for IPv6
- This is no issue nowdays.
-
02:33 PM Bug #2409 (Feedback): ipfw - entryzerostats
- This should behave even better with latest snapshots.
-
02:32 PM Bug #2377 (Feedback): Captive portal fails on empty RADIUS password
- Merged the pull request.
-
02:30 PM Feature #2128 (Bogus): Large DNS requests on dnsmaq
- Looking at this http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666517
Seems to not be a dnsmasq issue per se! -
02:30 PM Bug #1823: policy routing for firewall-initiated traffic only works for interface IPs
- Applied in changeset commit:7ee0f3a8869274874540024f97bd43880ee42082.
-
02:24 PM Bug #1823 (Feedback): policy routing for firewall-initiated traffic only works for interface IPs
-
02:26 PM Feature #1843 (Feedback): Diag > Limiter Info does not show queues under pipes
-
01:56 PM Bug #1621 (Feedback): Switching WAN from type PPP to other leaves former port assigned
- Can you please try new snapshots.
This hsould not be happening anymore. -
01:55 PM Feature #2117: 6RD support for ISPs like Swisscom
- Variable prefix for ipv4 has been committed.
GUI fixes are needed to be done now to allow this to be configured. - 01:35 PM Revision 8fcb7cf4: Use class tabcont for table
-
12:00 PM Bug #2763: Dynamic Firewall logs doesn't add new rows
- Applied in changeset commit:c251f8ccc84a7595bb14ccdd9754321c54762eaf.
-
06:40 AM Bug #2763: Dynamic Firewall logs doesn't add new rows
- I'd agree with that, the reason I hadn't noticed was that in [my version] of Chrome, I don't see the alignment proble...
-
06:01 AM Bug #2763: Dynamic Firewall logs doesn't add new rows
- Column widths looks good with new values, but rows height doesn't. Take a look at new attachments, seems the Act icon...
-
04:45 AM Bug #2763: Dynamic Firewall logs doesn't add new rows
- I'm guessing that you mean the column headers? I just copied across the span width values onto the column headers, bu...
-
10:13 AM Bug #2625 (New): Inconsistent behavior with Alias info popup
- For now we can just document this behavior and revisit the question for 2.2. I think it's OK how it is for 2.1 so lon...
-
07:42 AM Bug #2778 (Rejected): syslog - VPN IPSec - routing
- Not a bug.
[[http://doc.pfsense.org/index.php/Why_can%27t_I_query_SNMP,_use_syslog,_NTP,_or_other_services_initiated... -
07:30 AM Bug #2778 (Rejected): syslog - VPN IPSec - routing
- topology:
Site A 192.168.252.0/24 <----IpSec----> Site B 172.16.0.0/16
the serveur syslog-ng is 172.16.0.109 on... -
06:54 AM Bug #2656 (Closed): The "/" char in Virtual Server name disable the server
-
12:36 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- I tested with the following build and the issue is not present for me any more:
2.1-BETA1 (amd64)
built on Thu Ja... -
12:24 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- i did post at the freebsd forum and also somewhere on mpd long time back but hardly any1 replied, few suggestions wer...
01/24/2013
-
08:58 PM Bug #1629 (New): invalid state table entries after WAN IP change
- we at least need the option to wipe the entire state table upon IP change.
-
05:52 AM Bug #1629: invalid state table entries after WAN IP change
- The only real solution to this is to switch to if-bound states for many reasons.
That is a bit more involved changed... -
07:55 PM Bug #2746: IPv6 IPSEC shows down but is actually not...
- Thanks for getting back to me...
You are right, it was a configuration issue but a mean one :-)
If you selec... - 07:33 PM Revision e4ffca08: Make IPv4/IPv6 validation on IPSec
- It should fix #2769
- 07:32 PM Revision ab2ccd9f: Fix indent and blanks at EOL
-
07:16 PM Bug #2763 (Feedback): Dynamic Firewall logs doesn't add new rows
- Widget is working fine, but there is something wrong with fonts and sizes as you can see on attached screenshot.
-
07:13 PM Revision 1aafb710: Don't forget the wizard...
-
06:54 PM Revision a28d40cb: Allow specifying multiple local/remote networks for OpenVPN separated by commas. While I'm here, fix up the IPv6 tunnel/remote/local network input validation. Simplify some code using functions.
-
04:17 PM Bug #2633: Captive Portal timeouts cause users to be stuck in limbo
- Hi Ermal,
The fixes broke the captive portal entirely.
For one, DNS requests to the forwarder are completely bloc... -
02:50 PM Bug #2777 (Rejected): NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Port Forwarding (inbound) has nothing to do with Gateway Groups (outbound).
Please post in the forum for a more th... -
02:44 PM Bug #2777 (Rejected): NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- Nat(Port-forwarding) dont work with Multi-Wan, when the First WAN1-Interface has an higher Priotiy(Tier) or no Gatewa...
-
02:49 PM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- Bipin, if you've identified that Unisphere BRAS is used by all the ISPs you've tried and had problems with, then perh...
- 02:39 PM Revision f657f5e1: Ensure DHCP main range, pools ranges and static IP addresses don't overlap each other. It should fix #2773
- 02:30 PM Revision 41b4867e: Move is_inrange() to util.inc and rename it to is_inrange_v6()
- 02:29 PM Revision a78bf0c8: Fix logic of v6 version of is_inrange()
- 02:28 PM Revision 54404519: Move is_inrange() to util.inc and rename it to is_inrange_v4()
- 02:25 PM Revision 736698bd: Fix logic of is_inrange()
- 01:54 PM Revision 507628d5: Remove call-time pass-by-reference
-
01:40 PM Bug #2769 (Feedback): IPsec needs IPv4/IPv6 input validation
- Applied in changeset commit:e4ffca08822057400f6a8c2af91622e0c32f6140.
-
11:47 AM Revision 338c0941: Merge #237 manually whitout the GUI option for specifying interim interval. It will read now this attribute if present in a reply and use it. Fixes #1492
-
11:31 AM Revision a689bab6: Read Acct-Interim-Interval from an access-accept reply
-
11:19 AM Revision 9c115b40: Fixes #804. Correct deletion of ipv6 routes.
-
10:49 AM Revision c37e2460: Mostly for testing name relation in github. No functional change
-
10:44 AM Revision a5085d59: Mostly for testing name relation in github. No functional change
-
10:37 AM Revision 18f338da: Correctly bring down an interface older configuration. Fixes #2758
-
10:30 AM Revision 80fae0e2: Put for now the code here in preparation of properly cleaning a recofnigured interface
-
10:24 AM Revision 9343d750: Teach interface_bring_down to read a cofniguration passed in. Will be useful for Ticket #2758
-
10:18 AM Revision 203e4bb6: Do not be so verbose by default this is just needed by a developer at best
-
10:09 AM Revision 61223023: Validate before taking the input and do anything with it
-
09:57 AM Revision 0e22dda5: Put some more sanity checking for various interface configurations
-
09:56 AM Bug #2758: Old configuration remains when changing interface type
- After some tests here, i noted the issue persists. When I changed interface from static to pppoe, the static IP remai...
-
04:40 AM Bug #2758 (Feedback): Old configuration remains when changing interface type
- Applied in changeset commit:18f338da58e4f98478bd4710b3f4907759cd9540.
-
09:18 AM Feature #2776: Unknown Radius-Attributes
- If racoon gives you an IP from the pool, that is fine.
Assigning a specific IP to a specific user is what doesn't ... -
09:09 AM Feature #2776: Unknown Radius-Attributes
- Are you speaking of the radius-attributes like framed-ip-address of cisco?
the ip assignment on racoon is possible a... -
06:36 AM Feature #2776: Unknown Radius-Attributes
- The lack of IP assignment is a deficiency in racoon. There may not be anything we can do for that.
-
05:47 AM Feature #2776 (Resolved): Unknown Radius-Attributes
- In VPN ipsec mobile there is the possibility to use the server radius for authentication and accounting
The authent... -
08:51 AM Bug #2756: SNMPD problems when binding pppoe interface
- Okay i will remove it and see what will happens
-
08:29 AM Bug #2756: SNMPD problems when binding pppoe interface
- Can you try removing the trap host/port and see if it stays up longer?
-
08:26 AM Bug #2756: SNMPD problems when binding pppoe interface
- @root 68740 0.0 1.4 8368 6760 ?? Ss 3:27PM 0:00.05 /usr/sbin/bsnmpd -c /var/etc/snmpd.conf -p /var/run/s...
-
08:40 AM Bug #2773 (Feedback): DHCP pools need validated against other pools when saving
- Applied in changeset commit:f657f5e1e407a4687983b6e9907f0dc489945157.
-
05:50 AM Feature #1492: Captive Portal Interim Updates
- Applied in changeset commit:338c0941ef9a90d33b02627a320fb642d192b172.
-
05:46 AM Feature #1492 (Feedback): Captive Portal Interim Updates
-
05:46 AM Feature #1492: Captive Portal Interim Updates
- Merged manually without the GUI option.
-
05:20 AM Feature #804: Ability to enable/disable static routes
- Applied in changeset commit:9c115b409d0b21132dae9ad2c62f842a7e438f8f.
-
05:18 AM Feature #804 (Feedback): Ability to enable/disable static routes
-
04:52 AM Bug #2737 (Resolved): excessive filterdns processes in some circumstance(s)
- This is solved now days since filterdns just reloads config and does not need to be restarted on change.
-
04:40 AM Bug #1112 (Resolved): IPsec GUI/backend missing RADIUS support
- Please open a new ticket about that.
01/23/2013
- 11:22 PM Revision 7309ff39: Allow set DHCP options per reservation
-
08:32 PM Revision 5370146c: Make sure this is in global scope
-
08:02 PM Revision 5918f9b7: Resolves #2482. Remove an ipv6 alias from a vip eevn though the pfsense module does not have support for that
-
07:38 PM Revision f2bd8842: Correct reference to OpenVPN connect so it doesn't only refer to iOS.
-
07:10 PM Bug #2775 (Closed): OpenVPN Server binds on CARP IP on slave instead on master
-
07:10 PM Bug #2775: OpenVPN Server binds on CARP IP on slave instead on master
- Tested this on a cluster I had handy and servers bound to a CARP VIP run on both. I'm not seeing a problem.
We use... -
07:08 PM Bug #2775: OpenVPN Server binds on CARP IP on slave instead on master
- OpenVPN Servers are not bound by the same CARP restrictions as OpenVPN clients. It's normal for OpenVPN servers to be...
-
06:08 PM Bug #2775: OpenVPN Server binds on CARP IP on slave instead on master
- forgotten... the firewall slave binds on the right CARP IP:
wan_vip201: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu... -
05:51 PM Bug #2775 (Closed): OpenVPN Server binds on CARP IP on slave instead on master
- Hello,
I am running
2.1-BETA1 (amd64)
built on Mon Jan 14 11:26:04 EST 2013
FreeBSD 8.3-RELE... -
05:34 PM Bug #1995 (Closed): Cannot edit default queue
-
05:22 PM Bug #2761 (Closed): Widget detection function can cause duplicate widgets in the Web GUI
-
04:24 PM Revision 287f7e26: Convert all captiveportal code to not use ipfw_set_context since its not needed anymore. Also add code to validate cpzone on webgui pages before being used
-
02:42 PM Bug #2483 (Feedback): IPv6 Interface Aliases not functioning
- For now let it be without support from pfSense module to have that working.
-
02:10 PM Bug #2482 (Feedback): error trying to delete limiter
- Applied in changeset commit:5918f9b71295521fb06eac8aec8fabcf876e1831.
-
01:25 PM Bug #2633 (Feedback): Captive Portal timeouts cause users to be stuck in limbo
- Test later snapshots.
-
01:24 PM Bug #1112: IPsec GUI/backend missing RADIUS support
- Oh that part is not yet functional.
It is on my TODO which can be pushed if someone has the need.
But probably from... -
09:41 AM Bug #1112: IPsec GUI/backend missing RADIUS support
- Hi Ermal, I can authenticate the client on radius, but I cannot allocate the ip address and I cannot see the accounti...
-
04:37 AM Bug #1112: IPsec GUI/backend missing RADIUS support
- Can you please be more verbose about what is not working?
-
01:23 PM Bug #2759 (Resolved): Lightsquid not working since mod_cgi was removed
-
09:45 AM Bug #2759: Lightsquid not working since mod_cgi was removed
- Jim P wrote:
> This should be fixed on current snapshots dated 1/21 or later.
Yes, thank you. It works now. - 01:04 PM Revision fa7b825f: Fix some DHCP per pool options that will never be considered because of a wrong check
- 11:38 AM Revision b75d7fd5: Fix indent and whitespaces issues
-
07:26 AM Feature #2774 (New): Extend DHCP Pools code to allow using different subnets
- The current DHCP pools code allows creating multiple ranges within the same large subnet. The ISC DHCP Daemon also su...
-
07:12 AM Bug #2773 (Closed): DHCP pools need validated against other pools when saving
- The new DHCP pools code checks the range given to make sure it is OK for itself (end is after start, etc) but it does...
-
04:11 AM Bug #2772: Kernel panic on WAN wifi + pppoe
- Please go through the forum first for this.
But the crashdump should be a helpful bit of information.
01/22/2013
- 11:31 PM Revision b3af5453: Escape some variables used in mwexec() calls
-
09:47 PM Revision 2fb343ed: Merge pull request #342 from bcyrill/patch-3
- Update etc/inc/vpn.inc
-
07:36 PM Revision 96a6f4cb: Update etc/inc/vpn.inc
- There's no need to create a spd.conf.reload file if it's empty.
Phase 1 entries for mobile clients are not handled by... - 06:43 PM Revision f5e81794: Fix indent and whitespace issues
-
06:28 PM Revision ee55ce7d: Add GUI option to use "topology subnet" for OpenVPN, since the OpenVPN Connect iOS client requires it for IPv6
-
06:09 PM Bug #2772 (Closed): Kernel panic on WAN wifi + pppoe
- I have an alix (alix3d2, 2xminiPCI, 1xLAN, 2xUSB, bios 0.99h) board
with 2 miniPCI WiFi cards on it (WLM54GP23, Athe... - 05:53 PM Revision 30b3f068: Validate bridge interface before delete it
- 05:23 PM Revision c6f8c400: Fix indent and remove extra whitespaces between tabs and at EOL
- 05:08 PM Revision e9b6e032: Validate vlan interface before delete it
- 05:00 PM Revision eea7eb99: Validate QinQ vlan interface to be sure it exists
- 05:00 PM Revision 782e33f8: Validate QinQ interface to be sure it's valid
- 04:03 PM Revision 62f8244b: Fix indent and blank at EOL
- 03:24 PM Revision 908e5985: When QinQ members are changed, make sure interfaces are created/destroyed (attempt 2)
-
02:44 PM Feature #2771 (New): Add packet tracing simulator
- Functionally similar to the Cisco ASA command line:
packet-tracer input <interface> <protocol> <src-ip> <src-port> <... - 02:02 PM Revision b554b869: Revert "When QinQ members are changed, make sure interfaces are created/destroyed"
- This reverts commit a2bf1347c95bbb988bbd79d2cb091c28d9f075ed.
- 01:49 PM Revision a2bf1347: When QinQ members are changed, make sure interfaces are created/destroyed
-
12:39 PM Feature #2770 (Rejected): add "device mptable" to amd64 builds to make pfsense boot on soekris6501
- In http://www.mail-archive.com/soekris-tech@lists.soekris.com/msg06840.html a feature request ticket has been asked f...
- 10:54 AM Revision 1c3ddd9e: Fix indent
-
10:35 AM Bug #2746 (Feedback): IPv6 IPSEC shows down but is actually not...
- I just created a pure IPv6 tunnel between two VMs running today's snapshot and it comes up and works and the status s...
-
08:12 AM Bug #2746: IPv6 IPSEC shows down but is actually not...
- When your tunnels are up, can you attach the output of:
setkey -D
and
setkey -DP
That should help us with... -
10:20 AM Bug #2769 (Closed): IPsec needs IPv4/IPv6 input validation
- IPsec GUI input validation needs some work for IPv6.
If you choose IPv4 or IPv6 on the Phase 1 settings, addresses... -
09:53 AM Feature #2766: status_openvpn.php needs IPv6 support
- After poking some more there just isn't a way to get the info from the management interface that I can see. If you co...
-
12:57 AM Feature #2766: status_openvpn.php needs IPv6 support
- if this is just something that isn't available in OpenVPN 2.3.0, then let's just move the target to 2.2.
-
09:35 AM Bug #1351 (Feedback): Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- This should be OK these days, just make sure:
Phase 1 Settings:
Policy Generation: Unique
Proposal Checking: Str... -
08:05 AM Bug #2759 (Feedback): Lightsquid not working since mod_cgi was removed
- This should be fixed on current snapshots dated 1/21 or later.
-
01:14 AM Feature #2768 (Resolved): Don't allow adding IP Alias or CARP VIP on network or broadcast addresses
- It's currently possible to configure an IP alias or CARP IP on the network or broadcast address of a subnet. For inst...
-
12:55 AM Feature #2587 (Closed): Add IPv6 Privacy settings.
- yeah this really shouldn't have been left here, though it can be applicable in appliance usage scenarios. In general ...
01/21/2013
-
09:17 PM Revision 4fb2e5ed: If entering an action take the redir and exit even though the action was not successful to avoid any issue
-
09:08 PM Revision 09294e84: Validate the cpzone parameter passed that it actually is a valid zone
-
09:07 PM Revision ed97b2cb: Validate the cpzone parameter passed that it actually is a valid zone
-
08:58 PM Revision 3760b867: Use symlink rather than forked commands. Also simplify a bit code
-
08:54 PM Revision 82e89ce3: Use more secure file name for the operations to avoid issues
-
08:52 PM Revision 3335f5d1: Use more secure file name for the operations to avoid issues
-
08:47 PM Revision 4734474e: Revert "There should be always a zone given from lighty to us so try to get that first"
- This reverts commit 497d0b192f8e065ec3b4d1d94764b51c924a89b8.
-
08:46 PM Revision 497d0b19: There should be always a zone given from lighty to us so try to get that first
-
07:57 PM Revision 48006baf: Correct error/alert displaying. Also remove redundant log_errror since file_notice does that by its own
-
07:46 PM Revision e01570e1: Just the first line is interesting here
-
07:38 PM Revision 31a5f13c: Unset some vars to free space and also gather the error from pfctl since the first run of the command no need to run again. Also merge 3 exec() into one to avoid forking to much
-
07:38 PM Revision f32eae2d: Unser some vars to free space
-
07:33 PM Revision 8152f145: Default to using sha256 digest for GUI cert.
-
07:33 PM Revision ca621902: Allow selecting the digest algorithm when creating a CA or Cert. Implements #2765
-
07:21 PM Revision bc2b0144: Remove remenant of file based days
-
06:46 PM Bug #2767 (Rejected): NATting problem in virtualization environment
- this doesn't meet requirements for a legit bug report. http://doc.pfsense.org/index.php/Bug_reporting
There's a high... -
01:41 PM Bug #2767 (Rejected): NATting problem in virtualization environment
- I'm sorry I couldn't give better subject, but I experience weird networking problems using pfSense 2.1 beta in a KVM ...
- 03:47 PM Revision 586098db: Make sure default config complies with latest version
- 03:47 PM Revision 2d563280: Fix indent and remove trailing tabs and whitespaces
-
03:02 PM Revision 35b443af: No reason for the ppp log to use this display method, use dump_clog() instead.
-
03:02 PM Revision f0469c5c: No reason for the ppp log to use this display method, use dump_clog() instead.
-
02:59 PM Revision 39f245c8: A couple fixes for openvpn routing table display. Feature #2766
-
02:36 PM Revision f8bb2aac: Enable cgi for the webgui since some ports like lightsquid need it
-
02:35 PM Revision b35fdb17: Enable cgi for the webgui since some ports like lightsquid need it
-
02:34 PM Revision 25dc1bb0: Run IPsec logs through htmlspecialchars before display.
-
02:33 PM Revision 7ee7ed46: Run IPsec logs through htmlspecialchars before display.
-
02:25 PM Revision ec970b50: Add routing table display for each OpenVPN ssl/tls server instance, collapsed by default. Part of feature #2766
- 02:15 PM Revision 3dc76aa5: Update the default config.xml to 9.2 so it does not trigger config.xml upgrade during install of a new system
- 02:14 PM Revision 20a3b436: Add IPv6 privacy settings tunables. Keep the default FreeBSD value for them, that is disabled. This implements feature request #2587
-
01:40 PM Feature #2765 (Feedback): Allow generation an x509 certificates with an SHA256 signature hash
- Applied in changeset commit:ca6219025cabd3edbe53e522b345a167381a0171.
- 11:48 AM Revision 633c02c1: Previous attempt to fix #1995 allow to set more than one default queues, prevent it with this change. It should fix #1995
- 11:45 AM Revision f8dca5a3: Previous attempt to fix #1995 allow to set more than one default queues, prevent it with this change. It should fix #1995
-
10:49 AM Revision cb2bd7ff: Merge pull request #340 from bcyrill/voucher_sync
- Voucher sync
-
10:12 AM Feature #2587: Add IPv6 Privacy settings.
- There was a very short discussion about the IPv6 privacy extensions in the forum [1], with the key-point being that i...
-
09:02 AM Feature #2587 (Feedback): Add IPv6 Privacy settings.
- Applied in changeset commit:20a3b4368660c876c72ef9eefe684269fa356561
-
07:26 AM Feature #2766: status_openvpn.php needs IPv6 support
- Doesn't look like the OpenVPN management interface reports this back in the status line as it does for others, at lea...
-
04:46 AM Feature #2766 (Resolved): status_openvpn.php needs IPv6 support
- status_openvpn.php needs IPv6 support, for instance to show the IPv6 assigned virtual address instead of just the v4 ...
-
07:10 AM Bug #2756: SNMPD problems when binding pppoe interface
- Could you please collect snmpd process information when it starts?
# ps auxwww | grep -i snmp
And send the output. -
05:50 AM Bug #1995: Cannot edit default queue
- Applied in changeset commit:633c02c1ac86dcd10e52e87e68e5ca757990b6e8.
-
05:50 AM Bug #1995: Cannot edit default queue
- Applied in changeset commit:633c02c1ac86dcd10e52e87e68e5ca757990b6e8.
-
05:50 AM Bug #1995: Cannot edit default queue
- Applied in changeset commit:f8dca5a36e63e095f6e0e22e71ec1a1444097814.
-
05:50 AM Bug #1995 (Feedback): Cannot edit default queue
- Applied in changeset commit:f8dca5a36e63e095f6e0e22e71ec1a1444097814.
-
04:49 AM Bug #1995 (New): Cannot edit default queue
- Not fixed yet.
-
04:25 AM Bug #1995 (Resolved): Cannot edit default queue
-
05:13 AM Bug #2405 (Rejected): Lack of traffic shaping queue parent can take firewall down (pass no traffic)
- You cannot select parent queue, it's done automatically and queue will not be created without parent.
01/19/2013
-
09:22 PM Feature #2765: Allow generation an x509 certificates with an SHA256 signature hash
- Based on some searching I did earlier, it seems that the only ones suitable are:
sha1 (with the above mentioned re... -
08:45 PM Feature #2765: Allow generation an x509 certificates with an SHA256 signature hash
- I'd hate to hardcode a list, but openssl doesn't appear to have a good way to list the available message digest algor...
-
08:03 PM Feature #2765: Allow generation an x509 certificates with an SHA256 signature hash
- Just quick update:
1) The relevant keyword in openssl.cnf is default_md = sha256 # (md5/sha512/etc)
2) For openss... -
07:09 PM Feature #2765 (Resolved): Allow generation an x509 certificates with an SHA256 signature hash
- Apparently pfsense's Cert Manager has hard-coded the use of SHA-1 for all PKI operations ("digest_alg" => "sha1" in /...
-
04:24 AM Revision bbe29bb1: Update /etc/inc/voucher.inc
-
04:16 AM Revision a18eeb51: Update /etc/inc/voucher.inc
01/18/2013
-
05:13 PM Bug #2764 (Resolved): Captive Portal Voucher Sync issue
- I have found an issue with voucher sync. If you create a new voucher roll on the master pfSense and this new voucher ...
- 04:04 PM Revision 1489e8c8: Fix indent
-
10:29 AM Revision f8cb8685: Correct stoping of the db and sending radius stops
-
08:26 AM Revision 33127391: Merge pull request #338 from bcyrill/pkg_mgr
- Add version check to package install
-
08:24 AM Revision 1d9b9b73: Merge pull request #339 from bcyrill/patch-2
- Update etc/inc/interfaces.inc
-
07:22 AM Bug #2709 (Feedback): webgui cannot restart if php is hung
- This should be fixed/irrelevant now on 2.0.3 and 2.1. Many related changes in lighttpd and php config were made to fi...
-
07:20 AM Bug #2709: webgui cannot restart if php is hung
- The same is happening with me (2.0.2)...
-
06:03 AM Bug #2763 (Closed): Dynamic Firewall logs doesn't add new rows
- The Dynamic Firewall Log page doesn't add rows, it only updates the php generated rows which means that if it's loade...
-
04:47 AM Bug #2756: SNMPD problems when binding pppoe interface
- okay it sill stops working so here is my /var/etc/snmpd.conf...
-
03:25 AM Bug #2762 (Resolved): PF drops IPv6 packets with fragment header followed by a last fragment only
- PF has the same problem as is described here for ipfw.
http://lists.freebsd.org/pipermail/freebsd-net/2011-February... -
02:37 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- the issue is some driver related and Unisphere BRAS which more and more isp r using which uses some flood protection ...
-
01:01 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- this is a very old issue, a big long thread on this since ages http://forum.pfsense.org/index.php/topic,41061.0.html
-
12:26 AM Revision 15d15c7f: Update etc/inc/interfaces.inc
- As noted in http://forum.pfsense.org/index.php/topic,57849.0.html
01/17/2013
-
09:03 PM Bug #1856: Removing a Phase 2 does not remove the SPD policy
- This bug is related to #2719 and has most likely also been resolved.
- 07:00 PM Revision 473129bb: Allow to edit default queue. Should fix #1995
- 06:57 PM Revision dbf2dde4: Remove call-time pass-by-reference
- 06:56 PM Revision 20f5fce5: Allow to edit default queue. Should fix #1995
-
06:36 PM Revision 633d51b7: Add version check to package install
- 04:17 PM Revision c1ce0c51: Preserve "Idle timeout" parameter on interfaces gui. It fixes a problem pointed out on ticket #2641
- 04:15 PM Revision 5f921566: Revert part of 0ff214f27d that was committed accidentally
-
01:23 PM Bug #2756 (Feedback): SNMPD problems when binding pppoe interface
-
05:18 AM Bug #2756: SNMPD problems when binding pppoe interface
- If it doesn't help, please attach the content of /var/etc/snmpd.conf.
-
02:16 AM Bug #2756: SNMPD problems when binding pppoe interface
- i use the latest snapshot.
and yes i know the config is in /var/etc thats why i dont get why i see in system.log "/e... -
01:00 PM Bug #1995: Cannot edit default queue
- Applied in changeset commit:473129bbc3ddcb6011f2dd9a736addabe1db8acc.
-
01:00 PM Bug #1995 (Feedback): Cannot edit default queue
- Applied in changeset commit:20f5fce5e45a7356e53e9f206c88b7a7cd69da81.
- 11:53 AM Revision 2dde9989: Fix build list of widgets
- Only consider files ending in ".php" to restrict widgets and avoid load
wrong files. It should fix #2761 - 11:31 AM Revision 0ff214f2: Preserve "Idle timeout" parameter on interfaces gui. It fixes a problem pointed out on ticket #2641
-
11:09 AM Bug #2547 (Closed): Pbi manager does not remove old packages after update
- When the version is different it should work in the same way since it runs an uninstall for old before install the ne...
-
07:30 AM Bug #2547: Pbi manager does not remove old packages after update
- I believe that this was all sorted out some time ago. I just tested with the small package "blinkled"" on nanobsd:
i... -
07:00 AM Bug #2547 (Feedback): Pbi manager does not remove old packages after update
-
06:59 AM Bug #2547: Pbi manager does not remove old packages after update
- The process of package update consists on uninstall the old version and install the new one. If PBI was left, it was ...
-
11:05 AM Bug #1943 (Feedback): PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
-
07:59 AM Bug #2067 (Feedback): pppoe-binding deleted
- It probably was already fixed on the changes made during all these months. I checked here and couldn't reproduce.
... -
06:00 AM Bug #2761 (Feedback): Widget detection function can cause duplicate widgets in the Web GUI
- Applied in changeset commit:2dde998935cd0bfb4c72ca0512366cf248088ba1.
-
05:31 AM Bug #2761 (Closed): Widget detection function can cause duplicate widgets in the Web GUI
- The widget detection function in index.php doesn't filter out invalid files. This means that if you patch a widget fi...
-
02:32 AM Bug #2641 (Resolved): mac spoof on wan (pppoe) doesnt spoof
-
02:29 AM Bug #2641: mac spoof on wan (pppoe) doesnt spoof
- if thats the case then it works fine, u can close this bug.
one more thing i noticed not related to this issue but j... -
01:56 AM Bug #2641: mac spoof on wan (pppoe) doesnt spoof
- there's no way to revert a spoofed MAC short of rebooting (with PPP or anything else), the original MAC is gone once ...
-
01:48 AM Bug #2641: mac spoof on wan (pppoe) doesnt spoof
- tried, it works well but some issues. after i enter a spoofed mac id, it gets implemented and pppoe reconnects and us...
-
01:14 AM Revision 87537cf3: Validate passed parameters to smart commands, and the target device. Also escape when used in shell commands even after validation.
- Discovered-By: Bernhard Thaler
-
01:13 AM Revision 24879bc6: Validate passed parameters to smart commands, and the target device. Also escape when used in shell commands even after validation.
- Discovered-By: Bernhard Thaler
01/16/2013
-
08:02 PM Revision a8626608: Merge pull request #335 from ExolonDX/a0c0e8aefbac3e3979bac5fbfdecfedfe49cc2d3
- Tidy up HTML Colour Names
- 07:34 PM Revision a0c0e8ae: Tidy up HTML Colour Names
- With XHTML 1.0, the extended colour names are invalid, to make pfSense
as W3C compliant as possible, need to go back ... -
06:53 PM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- Is it still happening on recent snapshots? I couldn't reproduce it, every time I re-plugged the wan cabble, pppoe rec...
-
05:19 PM Revision 136f3e48: Merge pull request #334 from ExolonDX/master
- Tidy up malformed URI warnings
- 05:14 PM Revision 2151894c: Tidy up malformed URI warnings
- "/usr/local/etc/status.php" has lots of "malformed URI" warnings, this
update tidies these up, adds a missing end tab... -
04:19 PM Bug #2752: Captive Portal Last Activity isn't update anymore --> idle timeout just after login
- Next status update:
I reinstalled version 2.0.2 from scratch because I supposed that the update from 2.0.1 to 2.0.2 ... -
02:55 PM Revision 281cf46f: Forgotten -n option
-
02:54 PM Revision cf6dacfd: Merge pull request #333 from bcyrill/missing_return
- Missing return statement
-
02:47 PM Revision d5ac388b: Missing return statement
- 02:06 PM Revision 84086442: Set flag setautosrc to replicate parent's mac address automatically when it changes, it's a better solution then dettach it. This should fix #2641
- 01:34 PM Revision 70ae8b9c: Revert "When a interface type is changed, old configuration remains. When moving from static ip to ppp, it kepts the static ip configured on interface, when moving from ppp to static ip, it doesn't kill mpd. Implement interface_clean() to make sure only current configuration is in place"
- This reverts commit 9111e5fd88f284bd6f66a24a270af9d9fea1b6c7.
-
01:29 PM Revision 76a7d8e4: Merge git pull request 313 from bcyrill with some modifications
-
01:25 PM Revision 170a8550: Allow editing an imported CRL, and refresh OpenVPN CRLs when saving. Implements #2652
-
01:21 PM Revision 5cd73772: Use sysctl for this since its better rather than going thorugh dmesg
-
01:15 PM Revision 2d6a5d6a: Merge pull request #332 from bcyrill/patch-2
- Update etc/rc.update_bogons.sh
- 01:09 PM Revision 254ebf8b: Fix mac spoof when PPPoE is being used
- When PPPoE is set and you change interface's mac address, the netgraph
node kept using the old parent interface mac a... -
12:53 PM Revision c98951ce: Update etc/rc.update_bogons.sh
- The used version of sh does not support the fallthrough operator and function keyword.
-
12:30 PM Bug #2745 (Resolved): vpn_pppoe_edit.php loses settings on input errors
- 11:31 AM Revision 99e991fd: Add option to disable resolution, and drop down to select the gateway that your traceroute should use
-
11:22 AM Bug #2759 (Resolved): Lightsquid not working since mod_cgi was removed
- Since "this commit":https://github.com/bsdperimeter/pfsense/commit/f7bddb24d5cb98328fae3f83e1719085e099ea6e, the Ligh...
-
09:45 AM Bug #2758 (Resolved): Old configuration remains when changing interface type
- When interface type is changed, new type is configured correctly but the old type configuration is not cleaned up.
... -
08:11 AM Revision f28cb1c9: Merge pull request #328 from bcyrill/patch-7
- Update usr/local/captiveportal/index.php
-
08:10 AM Bug #2641: mac spoof on wan (pppoe) doesnt spoof
- Applied in changeset commit:84086442a2fa40b0fba12cf00a935144de3c5e71.
-
07:20 AM Bug #2641: mac spoof on wan (pppoe) doesnt spoof
- Applied in changeset commit:254ebf8b0fb9a8042d154ab2206d7c4f3f16b487.
-
07:36 AM Feature #2757 (Resolved): CDP/ISDP/LLDP support.
- Hello,
i think that will be good to add support for CDP/ISDP/LLDP discovery protocol into pfsense.
FreeBSD alrea... -
05:47 AM Bug #2756: SNMPD problems when binding pppoe interface
- Are you seeing this on recent snapshots?
snmpd.conf is located on /var/etc and not on /etc, do you have any custom... -
01:17 AM Feature #2603 (Resolved): Provide support for Package external name, internal name and service name to be different
- thanks!
-
12:05 AM Revision fad944a9: Update to master
01/15/2013
-
11:58 PM Revision 422e9d00: Merge pull request #329 from bcyrill/patch-8
- Update etc/inc/captiveportal.inc
-
11:57 PM Revision ea742716: Merge pull request #330 from bcyrill/patch-9
- Add portal_hostname_from_client_ip function
-
11:18 PM Feature #2603: Provide support for Package external name, internal name and service name to be different
- This is completed and working.
The final implementation was to just have the option to specify <internal_name> in ad... -
10:26 PM Revision de132ae3: Add portal_hostname_from_client_ip function
-
09:28 PM Revision 87e7fdea: Update etc/inc/captiveportal.inc
-
09:12 PM Revision 3b832418: Update usr/local/captiveportal/index.php
- 08:02 PM Revision 9111e5fd: When a interface type is changed, old configuration remains. When moving from static ip to ppp, it kepts the static ip configured on interface, when moving from ppp to static ip, it doesn't kill mpd. Implement interface_clean() to make sure only current configuration is in place
-
05:08 PM Revision f26c1f79: Use functions to reduce code duplication; Add function to clear route to the interface IP before starting openvpn, otherwise the process cannot start. Ticket #2712
-
04:30 PM Revision 46830150: Better test if we're running at the cli or in lighty. Also suppress output for the session start if it fails.
-
04:28 PM Revision a74260cb: Better test if we're running at the cli or in lighty. Also suppress output for the session start if it fails.
-
03:13 PM Revision b3435de1: Fixup home/end/ins/del in shell.
-
02:50 PM Bug #2726 (Resolved): deletion of DHCPv6 leases from status_dhcpv6_leases.php does not work
-
02:46 PM Bug #2726: deletion of DHCPv6 leases from status_dhcpv6_leases.php does not work
- Yep, that appears to have fixed it.
- 02:22 PM Revision 8a16c550: Revert part of 8e9d126550 since it breaks wifi interfaces at boot time
-
01:51 PM Bug #2756 (Closed): SNMPD problems when binding pppoe interface
- snmd stop working after a while
i restart the service and its working fine
All modules loaded
Modules
SNMP ... -
08:19 AM Revision 05c6f644: Merge pull request #326 from fsSnowboard/master
- Modern games added to Traffic Shaper Wizard
-
01:54 AM Revision 71461d38: fixed spelling
- 01:45 AM Revision a2696314: Merge pull request #325 from bcyrill/patch-5
- Remove redundant code fragment
-
01:06 AM Revision a3e97754: Remove redundant code fragment
- 12:13 AM Revision c15a87f7: Avoid duplicating /32 suffix on 3rd ppp-linkdown parameter (local-ip). It should fix #2700
Also available in: Atom