Activity
From 06/04/2010 to 07/03/2010
07/03/2010
-
08:42 PM
Bug #718: Error when saving Captive Portal Settings
- after a few times the problem suddenly disappeared..
-
04:00 PM
Bug #718 (Closed): Error when saving Captive Portal Settings
- 2.0-BETA3 built on Sat Jul 3 01:11:56 EDT 2010
FreeBSD 8.1-RC1
Jul 3 21:48:52 php[18560]: /services_captiveport... -
02:51 PM
Bug #708: Need more checks for dns rebind issue
- Hello,
I'm new here, but I wanted you to know this DNS rebind check had to be commented out in order to get the c... -
02:41 PM Bug #541 (New): Missing binaries on 64 bit
- Still missing post-install:
/usr/local/bin/
voucher
wol
/usr/local/sbin/
dnswatch
gzsig
ssh_tunnel_shel... -
- After booting the LiveCD for the first time, there is no default gateway.
If you install to HDD, and make no other...
07/02/2010
-
03:54 PM Bug #710: Interfaces error on WAN
- My LAN IP does disappear at boot and needs to be configured again. The fatal error message comes up when I want to se...
-
- Does your LAN IP disappear on the console at boot, or only when you view the LAN configuration in the web interface?
... -
- Fatal error: Cannot unset string offsets in /usr/local/www/interfaces.php on line 495
This is the error message I... -
02:26 PM Bug #716 (Resolved): Shaper: Cannot remove service curve values m1 or d
- If a queue has all three service curve values populated, it is not possible to remove m1 and 3 to remove the service ...
-
02:00 PM Bug #715 (Resolved): RRD Graph on Throughput Contains No Info
- System -> Throughput RRD graph contains nothing. There are simply no graphs displayed. The system log has no mention ...
-
- I have no 3G modem installed, but the Cellular RRD graph tab is still showing.
This has been observed on:
2.0-B... -
- Shaper wizard results for basic config:
qOthersLow - LinkShare: 5%, 500ms, 5% < This is a flat curve and redunda... -
-
05:45 AM pfSense Packages Feature #711: [zabbix-agent] Timeout fields and custom rules in the web interface
- Ok, I understand.
There is new zabbix-agent.xml in attachment.
Changes:... -
03:40 AM pfSense Packages Feature #711: [zabbix-agent] Timeout fields and custom rules in the web interface
- Don't assign tickets to anyone unless they tell you to. There is no active maintainer of the Zabbix package. If you a...
-
- Why deleted? Judging from the history of development, Jim P, the developer of this package.
If low-priority featur... -
- Add please Timeout field and custom rules in the web interface.
-
- I am able to make users on that same snapshot without issue, and there have also been a few commits to that file sinc...
-
05:32 AM Bug #712 (Resolved): Error when adding user.
- ...
07/01/2010
-
05:14 PM Bug #708 (Feedback): Need more checks for dns rebind issue
- Thanks Bill, I committed these changes to dnsmasq and to auth.inc.
-
04:11 PM Bug #708: Need more checks for dns rebind issue
- Chris Buechler wrote:
> This is a good addition for dnsmasq, there are a couple issues with this in general though. ... -
- Something like this is the likely fix in auth.inc...
-
- This is a good addition for dnsmasq, there are a couple issues with this in general though.
1) The dnsmasq change b... -
- I just committed a change for --stop-dns-rebind on dnsmasq but we need to go a bit further on our checks in auth.inc:...
-
- Some counters on the DHCP leases page would be useful, counts of active/inactive/expired leases inside of each pool, ...
-
03:58 AM Todo #704: Load cpufreq.ko when powerd is enabled
- kldstat
Id Refs Address Size Name
1 15 0xc0400000 c61cd4 kernel
2 1 0xc2c79000 e000 dummynet.k... -
- I got that error the next time I booted my router, so it may still be an issue. I'll look into it.
Does the ALIX e... -
- im running on my alix
06/30/2010
-
- I can confirm this does work on TSO cards, but it would help to have some feedback if anyone has a card with LRO to try.
-
- What kind of hardware are you using?
I'm running it on my router (VIA CPU running a NanoBSD snapshot) and it loads w... -
- im on the 30th june nanobsd snap and if i enable powerd, this is what i get in the console
powerd: lookup freq: No... -
- dont know what to put this bug under so have written limiter as thats the related error, information to reporudce it ...
06/29/2010
-
- I've changed the shell code around a bit so that normal users with shell access just get tcsh as a shell, because the...
-
- Applied in changeset commit:"09ba7f74c35c399c46f44cd95d509e5bb6703803".
-
- Applied in changeset commit:"c3b13d6082033ecd1d3f7672ca9b1533942ec00a".
-
- Applied in changeset commit:"9c46da2615a9fccf1e90f7658e8dfc2fee3ff52b".
-
- According to the OpenVPN config file reference, that should be safe to add in all cases, even when TLS is not in use.
-
- Applied in changeset commit:"929a1b15cc627151655e126f88489930e828c7ef".
06/28/2010
-
- OpenVPN client export needs to include the following line in all client configurations.
remote-cert-tls server -
- setup_microcode() loops through interfaces by name (WAN, LAN, etc) and calls enable_hardware_offloading() on each ent...
-
- Applied in changeset commit:"9e3aadbe90cb6708fa86471fef45be5965bea602".
-
- There are still some drivers on 8 that do not work well with TSO and/or LRO enabled on the cards. We need to have che...
-
- Looks like we need to load cpufreq.ko when powerd is enabled, and some systems also need to change their timecounter ...
-
- At the big load on the channel, additional reports in a system log began to appear:...
-
- till date doesnt work, current situation is, works right after install but if u reboot, the service isnt run again so...
-
- Now the state "Limiter" can be learn only in the console, command @ipfw pipe show@.
It is necessary to make page o...
06/27/2010
-
11:04 PM Bug #682: WAN traffic graph is broken with MLPPP
- I enabled the WAN/mlppp parent interfaces for the purpose of interacting with the modems, and noticed that the parent...
-
- This still isn't properly disabling txcsum. Ermal, you can see it on 10.0.64.180.
-
-
-
- fixed
-
- fixed
-
- fixed
-
- fixed
-
- this particular issue is resolved
-
- fixed
06/26/2010
-
- fixed
-
-
- # 2 mentioned in the initial ticket looks to be good now. # 1 needs to be addressed.
-
-
- looks good
-
-
- fixed
-
- description now fixed as well.
-
- no change
-
- fixed
-
- In some scenarios it would be helpful to use interface groups with NAT (rdr and outbound).
-
- in spite of dial on demand being ticked, the older snaps at least used to disconnect the the line and then due to dia...
06/25/2010
-
-
08:25 PM Bug #667: dial on demand broken again
- Before Ermal applied changeset a138f4fbc077f89ff413355ba738e00d36317973 the disconnect button did one thing for all t...
-
10:24 PM Bug #700 (Resolved): Gatwway status wrong because of mismatch between interface names
- Check http://forum.pfsense.org/index.php/topic,26222.0.html for more information
Basically the comparison if ($sta... -
06:18 PM Bug #699 (Closed): html escaping problem in alias member description
- Alias member descriptions seem to not be escaped, eg. I have a network alias with a cidr block member, if the descrip...
-
- When nesting an alias within a network alias, the default "/32" causes it to fail. You can manually change the cidr ...
-
04:49 PM Bug #621: Certificate Manager won't accept a windows CA signed certificate
- Not sure if I can get a hold of the csr, as the certificate is generated by going to the Windows CA certificate reque...
-
- Issue semi-fixed by deleting then recreating mlppp interface. Legacy xml from testing phase was causing this problem,...
-
- I should clarify - seems only the NAT states are still around.
-
- This still doesn't work, when a link fails its states aren't deleted. Running 'pfctl -b $interfaceip' manually also d...
-
- Applied in changeset commit:"2708e3997d81f8a755d6b6a31247c2c120b4b4de".
-
-
- still doesn't add the rdrs
-
- fixed
-
12:30 PM Bug #696 (Feedback): Error in NAT rules generating
- Applied in changeset commit:"dabc76691966f00a20081b7731b2c5816f066536".
-
- Looks like that's the only case that's not handled right, rather than tcp/udp it should be { tcp udp }
-
- Do you get an error with anything other than the tcp/udp option? That one in particular doesn't look like it is bein...
-
- reproduce:
1. Set 'Firewall: NAT: Outbound' -> 'Manual Outbound NAT rule generation (Advanced Outbound NAT (AON))'
... -
- Applied in changeset commit:"ff93a5c1460e5c48f10fe92587ff2913eff8450a".
-
- Also, the issue of 1's showing up in the setup wizard for some of the blank fields was already fixed sometime.
-
08:49 AM Bug #516: Auto update doesn't work on embedded
- new feature ticket opened as #697
-
- splitt from #516
-
- if you start the upgrade process and the file is downloaded you only get the message, system will reboot when upgrade...
-
- ...
06/24/2010
-
10:07 PM Bug #610: max-mss -39
- Just a quick "thanks". Nice work guys.
-
- ahh, so the real issue is improper input validation on the setup wizard. Confirmed if you stick 1 in the config manua...
-
- It was a side effect of "1" showing up in some Wizard boxes. It was trying to set the MTU to 1, and the max-mss to MT...
-
- Not sure how to replicate this. The fix looks fine. Brett - can you confirm the fix?
-
- no change
-
-
- Valid MTU is still not verified. Didn't check other fields.
-
- Yeah this is closed and won't be reopened. Either open a feature request (which will be for post-2.0) or submit teste...
-
- If you want to open a separate ticket for that, that would be better. This ticket was about the update not functionin...
-
- it works very very fine thanks a lot, but ... a little Detail
if you start the upgrade process and the file is dow... -
- There have been many positive success reports between here, the forum, and IRC. It seems to be working well now.
-
- fixed
-
-
07:31 PM pfSense Packages Bug #688: Delay pools are not compiled in Squid
- delay pools works now thank you.
-
- This should be OK now. Update the package and try again. I updated squid to 2.7.9 and compiled in delay pools.
-
- Applied in changeset commit:"2b2c083f922067d75352c625e0590042fa2ce8bf".
-
- This may be a sign of another problem, but the Avahi package was downloading its .tgz file to /tmp/ and extracting fr...
-
- If on the interface (e.g. WAN/em1) are customised virtual IPs.
We change the interface on page 'Interfaces: Assign... -
- ...
06/23/2010
-
- i have installed pfSense-2.0-BETA3-4g-20100623-1544-nanobsd-upgrade.img.gz
and selected
http://snapshots.pfsense.o... -
- This looks okay in asn1 notation. Do you have the csr file ?
-
-
05:21 PM Bug #686: Traffic shaper on single interface?
- Its correct the shaper can work on only one interface too.
-
- This is actually pretty easy to reproduce, even in a VM, but only with NanoBSD. Full installs are OK. It seems to onl...
-
-
- During some testing I checked 'Disable password login for Secure Shell (RSA key only)' and clicked Save, and sshd res...
-
-
12:29 PM pfSense Packages Bug #692 (Closed): snort pidfile issue
- FATAL ERROR: Invalid pidfile suffix: 50677msk0_vlan600. Suffix must less than 11 characters and not have ".." or "/"...
-
- You can increase the limit from 50 under Settings if you so desire. We can't move every little thing out to its own l...
-
- SSH authentication failures currently go to the System log. With its limit of displaying 50 lines, only a handful of ...
-
- ...
06/22/2010
-
- You can file a test notice by going to Diag>Command, in PHP box put in:
file_notice("test","test");
-
- Growl sometimes gets a bit weird with needing to be sure the password is right and all, so it'd be nice to have a tes...
-
- Output in the latest Squid package under 1.2.3 shows:
@# squid -v
Squid Cache: Version 2.7.STABLE7
configure opt... -
05:12 PM Bug #686 (Closed): Traffic shaper on single interface?
- Silly question, but revision http://redmine.pfsense.org/projects/pfsense/repository/revisions/38b357bdb50b820d63646d4...
-
- Using pfSense 2.0 BETA3 embedded nightly from sometime around 18-Jun-2010 I installed the Avahi and OpenVPN export pa...
-
- Applied in changeset commit:"e879fc815effb1477ba13f2dfc2aed4b8f2d40be".
-
- one step i do to get over this is as follow:
on clickign disconnect nothing happens even after a few mins so i go ... -
- dial on demand is checked but in older snaps, on clicking disconnect, pppoe used to disconnect and due to dial on dem...
-
- Have you checked dial-on-demand?
Any entries in the system log?
Please can you provide the output of commands:
i... -
- disconnect button under status > interfaces doesnt work for pppoe connections, on clicking it, the pppoe conenction i...
06/21/2010
-
- I've seen it sometimes, but rarely (not sure if it was specifically in Chrome or if I've seen it elsewhere). I think...
-
- After the next snapshot builder run, auto update should be possible on NanoBSD/embedded. You will need to update once...
-
- No, the removal of the file won't cause the packages to install again.
If you want to disable the GUI reinstall, ... -
- Well i think rather than hiding an error it needs to be found where this setting is triggered elsewhere?
It will sti... -
- Applied in changeset commit:"2d402f570b4925fe8c44218bdf72de1878704d17".
-
- All good - thanks.
-
- Applied in changeset commit:"52cf107d518e23cbd4d45a6aa0edac293dd7c27c".
-
- Fix committed. Thanks.
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/52cf107d518e23cbd4d45a6aa0eda... -
- Slight cosmetic issue on interfaces_ppps.php. The tab_array for PPPs is not set to true so the tab is not displayed a...
-
- Applied in changeset commit:"bf02c78434cb5b3b5bec7a8c5b70ee12001641b7".
-
- From http://forum.pfsense.org/index.php/topic,26126.0.html
clarknova wrote:
> I was testing the mlppp package bef... -
- This should be fixed now:
https://rcs.pfsense.org/projects/pfsense-tools/repos/mainline/commits/bf8d28eb2787f86e40... -
06:15 AM Bug #681 (Resolved): upgrade snapshot change nanobsd image identification (
- I've update a nanobsd 1G 17-06 snapshot with new 20-06 update ( http://snapshots.pfsense.org/FreeBSD_RELENG_8_1/i386/...
06/20/2010
-
-
02:50 PM Bug #674: Missing delete buttons on individual NAT rules
- I just installed latest build. Buttons are there, and they work:)
-
- Ermal Luçi wrote:
> Can you test latest snapshots?
Yes, now the status is displayed everywhere.
But there was ...
06/19/2010
-
- 2.0-BETA3
built on Thu Jun 17 13:50:57 EDT 2010
FreeBSD pfsense2.hupfeldt 8.1-RC1 FreeBSD 8.1-RC1 #0: Thu Jun 17 ... -
- I have the same problem. running on ALIX with atheros based card. ifconfig vr0 -txcsum solves problem.
-
- That has to be a Chrome on Linux bug, I've spent more time working with 2.0 in Chrome this year than a heavy user wil...
-
- In my opinion is a mistake your browser chrome (besides the old version).
I also use chrome, and had ever seen. -
- Google Chrome Beta, 5.0.375.70, Ubuntu Linux
----
pfSense:
2.0-BETA3
built on Thu Jun 17 13:50:57 EDT 2010
Fre... -
- On what platform, and how can you replicate it? I work 90% in Chrome (mostly on Windows), and never seen that.
-
- Menus suddenly become transparent/unreadable. Sorry, don't know what provokes it, but its has happened several times....
-
- What I meant about create on enabling is that it should happen every time ssh is enabled, if the keys are missing. Ri...
-
- I suspect the SSH upgrade code is not working correctly. At some point the SSH config item was moved.
-
- Lars Hupfeldt Nielsen wrote:
> It would also be a good idea to create the keys if missing when ssh is enabled.
Fi... -
- Yes, I'm using NanoBSD, on Alix boards. There are no fields for build/platform details right?
-----------
2.0-BET... -
- I presume this is on NanoBSD? On all your tickets you should really specify if you are using NanoBSD since it can beh...
-
- See attached image.
-
10:15 AM
Bug #678 (Feedback): cant go to dashboard due to package reinstall screen everytime
- Applied in changeset commit:"d4b17d7ce7bb02806e28ba1c79d5679d5c3a43d4".
-
- I committed a fix for this and restarted the snapshot builder run that was active, so the next set of snapshots shoul...
-
- im on the 19th June nanobsd snap and there was a recent patch by Emal regarding package sync etc on bootup but i gues...
06/18/2010
-
- Aliases with multiple ports do not currently work with Reflection, though there actually isn't really any reason it c...
-
- I have other aliases with multiple ports, none of them are overlapping. Reflection is not working for other services ...
-
- No, just a single port (2201).
-
- Do you have multiple ports in the same alias? Specifically on the one that is failing.
-
- Trying to telnet to a NATted server gives the following error:
xx@xx:~$ telnet xxx.xx 2201
Trying xx.xx.xx.xx...
... -
- It would also be a good idea to create the keys if missing when ssh is enabled.
-
- That could be possible, though I thought that was handled in the upgrade code. I'm reopening the ticket and changing ...
-
- I lost my long edit because I was messing with my firewall:(, so once more:
$ ls -l /conf/sshd
total 4
-rw------... -
- The update checks do not work right now, ignore that.
Then I'd need at least the output of:... -
- I've updated twice, once before submitting the bug, and again just now (the dashboard keeps saying update available, ...
-
- I cannot reproduce this on an existing or fresh install. We need more detail, including which steps you took that res...
-
- [See comments later in the ticket]
After installing BETA3 I get the following error banner:
Acknowledge All ... -
- Well, there are checkboxes to autocreate firewall rules when creating NAT rules. I would guess that allowing all traf...
-
- In 2.0 you decide how to filter bridge interfaces and IT IS considered a normal interface.
You can create interfac... -
- There should be an option to autocreate rules to allow all traffic between bridged interfaces.
-
- I already sent you my config for this Ermal.
-
- Please provide the sample from 1.2.x config to be upgraded
-
- Can you please try a recent snapshot and report the contents or /root/check_reload_status.log and system log messages...
-
-
- Can you test latest snapshots?
-
- It seems that doing a "firmware" update initiates a reinstall of all packages. After firmware update HAVP broke again...
-
01:20 PM Feature #677 (Resolved): Allow custom SMTP port for notifications
- Allow sending of e-mail notifications to ports other than TCP/25 for ISPs that block SMTP.
-
12:25 PM
Bug #674 (Feedback): Missing delete buttons on individual NAT rules
- Applied in changeset commit:"759d0de1e8a199ac7e52ce209089977791bd98b0".
-
- The "Rules" and "NAT" interfaces are inconsistent. "NAT" should have delete button on each rule like "Rules".
-
- See also #676
-
- Could be done along with #663
-
- Being able to assign fixed DHCP leases (bulk) or entire DHCP setup to another interface would be very convenient when...
-
- This is not a legit bug report or feature request, it's a support/consulting request. If you would like our personal ...
-
12:17 AM Feature #671: squid zero pinalty hit
- Lulik Kurnianto wrote:
> Dear Ermal,
>
> Can you help me to make the bandwidth of the captiveportal BW limiter in... -
- Dear Ermal,
Can you help me to make the bandwidth of the limiter in order to bypass traffic captiveportal who came... -
02:54 AM pfSense Packages Bug #668: Snort does not deinstall properly
- I too noticed that when I tried to uninstall Snort, there was no effect. But when I tried again immediately, it did ...
06/17/2010
-
- Applied in changeset commit:"f23e63638af309ec317dc924794c34dd1c68fecc".
-
- I believe several users on the forum tested it and were successful. You can look in the 2.0 board on the forum for co...
-
04:19 PM Bug #281: Traffic initiated by PPTP clients not passed
- Does anyone know if the latest snapshot has been tested as per post #13? If not, I can test late next week. If test...
-
- http://forum.pfsense.org/index.php/topic,26044.0.html
when I cretaed a rule with "Diffserv Code Point" like here :... -
- I noticed this recently, seems the hotplug event doesn't kick off dhclient like it used to.
-
- New image 17-06-10 nanobsd with default configuration
WAN DHCP
LAN 192.168.1.1
If I connect WAN interface to a... -
- and an update on it, on click disconnect from interfaces, the gateway is lost but conenction still up so this keeps c...
-
- tested it with the latest snap with the patch, now another issue has popped up, if u go to interface and click discon...
-
- HAVP does not remove "Antivirus" menu point when de-installed. The package is removed from Package manager overview. ...
-
- Attempting to de-install "Snort" leaves the package as installed in package manager overview. Accessing the Snort men...
-
- Now with one virtual IP really works.
But :)
If to change at once 2 virtual IP (and more)..
Before tests (VIP:... -
- fixed, thanks
-
02:11 AM Bug #649 (Feedback): Status > Wireless doesn't work
- get_real_interface() was required to get the correct wireless interface name
06/16/2010
-
- Applied in changeset commit:"53824804f4c5ffb3c75838bf8235b979dfb650f5".
-
10:49 AM Bug #666: No one gateway
- I am seeing the same messages as well.
Message:
|Jun 16 10:48:10|check_reload_status: reloading filter|
|Jun 16 ... -
- ...
-
- You have to provide more data for this from the last snapshot.
-
- After one of the last changes any gateway is not displayed on page 'Status: Gateways' (and widget 'Gateways').
In 'S... -
- Applied in changeset commit:"962fd685516ae137674ed0cde2445ebbeeefbdff".
-
-
- I have tested again.
Now Virtual IP (IfAlias) on the interface correctly is added and deleted.
But at change from... -
- Applied in changeset commit:"a138f4fbc077f89ff413355ba738e00d36317973".
-
-
- dial on demand doesnt seem to work again for pppoe, i have that tick and now if i go to interfaces and click disconne...
-
- There are no new ideas of solution of the task?
The error still is not corrected :(
06/15/2010
-
- In 1.2.3 and all earlier versions, where a subnet is reachable via static route on an internal interface, it's automa...
-
- commit:6af7c40b296e0f95ec308d41aea55b3306c5e1ee (which was reverted but then recommitted) was intended to fix this, b...
-
-
- As of commit:38564fde256e83e26f1f65d28ff064e835206ec9 this has regressed. The fix was reverted for some reason in th...
-
- Applied in changeset commit:"0bbf8900e0e4288e49f432f83ead8ac8949fbb58".
-
-
- Please provide more information or this will not be considered.
-
-
- I added a check so that the protocol will show as "none" in the case of a packet like this happening in the future.
-
-
- Yes, so too works :)
-
- Applied in changeset commit:"e52ba50c5851d59d6ab5faf341aee64ff3839648".
-
- http://redmine.pfsense.org/projects/pfsense/repository/revisions/2f92b34db07b57ad7d4232dc2a30f8785a907186
line 398... -
- It shows my local accesspoints, all 1 of them, which is on the 802.11a band. No idea where the other (10) are. Perhap...
-
- Eventually it would be nice to have multiple ranges in the same subnet. ISC DHCPD supports this just fine, just needs...
-
- Add more settings for DHCP static entries such as the gateway, dns, etc so that they may be applied on a per-user basis.
-
- Already fixed, duplicate of #661
-
- After updating this morning none of my services would start.
Error shown was...
06/14/2010
-
- this isn't a legit bug report, there isn't a specific bug here. Post to the forum or mailing list and if a problem ca...
-
- 10-06 Snapshot
PPTP VPN from lan client to external PPTP server:
Windows 2003 works
Windows 2008 does not works, ... -
- This used to work in 2.0 even, for both of the mentioned scenarios. Neither do now.
-
- When you disable IPsec, all SPDs should be flushed or traffic that would have been going across the VPN will still be...
-
- sticky isn't added to the ruleset at all anymore, nor is round-robin (though it functions as such with two gateways a...
-
- If you're at a particular page in the web interface and your session times out, when you refresh that page and log in...
-
-
- oh, and Ermal asked me to include this:
http://svn.freebsd.org/viewvc/base/stable/8/sbin/ipfw/dummynet.c?revision=2... -
- configuring a limiter with a non-integer limit, such as 1.5 Mbps, results in a 1 bps limiter (effectively blocking al...
-
05:50 PM
Bug #653 (Feedback): Sorting on Status > DHCP leases doesn't work
- Applied in changeset commit:"513c5c118991fe8747bdce36d7e79603209d07af".
-
- Do you mean changing the sort by clicking column headers? I do see that doesn't appear to work. The default sort se...
-
- Sorting works on this screen in 1.2.3, but not in 2.0.
-
- When you first go to the SNMP configuration page, having never been there before with a fresh configuration, the SNMP...
-
- Setting IBSS on a wireless interface doesn't take effect when applied, but does work after a reboot.
http://forum.... -
- I am able to assign vr0 and vr1 to an mlppp interface, bring it up, then assign static IP addresses to parent interfa...
-
06:41 AM Feature #446: Enable ether interface to be reused (when used for PPPOE), like wireless clone
- Sent email.
-
- I am not sure what are you seeing here has any relevance to the underlying interface.
Can you post your configuration. -
- It might be more useful to make the WAN(pptp0) and PPTP0(vr0) actual separate logical devices in the interface (assig...
-
- Running "Jun 10 14:59" build and I had to add a floating "pass quick proto gre from subnet to internal IP". Otherwise...
-
- WAN on DHCP, after a link down, no renegotiate ip from dhcp ( link up but no IP )
On lan interface working fine. -
- ...
-
- Applied in changeset commit:"e03b0a03fb52f94e4f2a85baecdcb9ada18ec939".
-
-
-
- Applied in changeset commit:"2b6f65d736003028f8def68b325cc10998dc6fea".
-
-
- It should be ok on newer snapshots.
-
- Applied in changeset commit:"aceedad44980491be954a98a170691a3cc23a57b".
-
06/13/2010
-
- This needs to be carefully tested again since the recent changes to the PPPoE configuration code reworked it a bit.
-
- This feature now exists. Builds after June 10th have the ability for accomodate multiple PPtP/PPPoE WAN connections o...
06/12/2010
-
- When you have multiple gateways configured and change the default from one to another, it doesn't get updated. The lo...
-
07:48 AM Bug #651: Multiple gateways on WAN interface
- Another small indication: when I delete a *gateway* in the *routing page* or if I modify the *monitor IP*, the *route...
-
- In system routing I created two gateways on the WAN interface, and for both I added a monitor IP.
If the second gate...
06/11/2010
-
- Similarly it would be nice if two PPTP WAN connections could use the same physical interface.
If you have a coupl... -
- Possibly the recent changes to get_real_interface?
-
- I'll look into it.
-
- Users and Groups do not sync to peers in a failover/sync configuration.
It should be doable the same way I handle ... -
- Applied in changeset commit:"0d90fcaff2d1f32cc0c9b36adf89710542c7670a".
-
- Applied in changeset commit:"c3fef0c9b4635323f6047ea213640363bcb5cf2e".
-
- This should be OK now.
-
- Some more info on how to reproduce this. On a pair of systems already setup for config sync, do the following:
On ... -
- Some more info on how to reproduce this. On a pair of systems already setup for config sync, do the following:
On ... -
- Oscar Francia wrote:
> In snapshot 10-06 PPTP from lan to external PPTP Windows 2008 does not work!
This ticket i... -
- In snapshot 10-06 PPTP from lan to external PPTP Windows 2008 does not work!
-
-
- Your test code is wrong.
-
- For the test I have created more simple l7 rule:...
-
- Now periodically there are other messages in system.log:...
-
01:06 AM Bug #536: apinger at times fails to touch filter_dirty
- On a jun 9 snapshot the issue still shows.
06/10/2010
-
- $rwlif is blank at the point where ifconfig list scan is run.
-
- I seriously doubt if anyone is running any of those on the live CD. Almost no one runs the live CD long term, I've ye...
-
- What about LiveCD consumers of such packages?
-
- The "base system" packages such as RIP and OLSR were originally built in because embedded lacked package support. Now...
-
- * Migrate the CARP settings page from its current format as a package XML settings page to a standard PHP page
* Mig... -
- DHCP Settings do not sync to peers in a CARP cluster, mainly because of the failover IP must be preserved.
There m... -
- In a CARP cluster setup, OpenVPN settings do not sync to peers when they should.
-
- This may be related to #643 in some way, upon further testing. I can only reproduce it if I change the VHID on the ma...
-
- If you change the VHID of a CARP VIP, the old interface is not deactivated/destroyed, or reused.
I know at one po... -
- This does not happen as expected. The VHID does sync in the config, but that change does not propagate to the actual ...
-
- On the first sync of a CARP VIP to a backup host, the settings are copied but the CARP interface is not created.
I... -
01:02 PM Bug #636: layer7 not work correctly
- trying to enable ipfw-classifyd in this mornings snapshot gives me this output in my system logs :
Jun 10 16:24:31... -
- If you try to set a single DNS server in the setup wizard, it does not save. (DNS server entries under System > Gener...
-
- Questions here: http://forum.pfsense.org/index.php/topic,25465.0.html
-
- $real_nic_names = convert_friendly_interface_to_real_interface_name($ifname); outputs nothing
As pfsense-utils.inc u... -
- Confirmed fixed in snapshot from 2010-06-10
-
- Fixes have gone in for this.
-
-
- Yes, now lighttpd works. Many thanks.
06/09/2010
-
-
07:08 PM Bug #302: Shaper wizard remembers values on error, but are disabled
- Yup, seconded. Still a problem. Using June 2's build. The revision in question actually makes the problem worse- prev...
-
- Please try again latest snapshot many things have been fixed and this seems to work as expected now.
-
- This should be fixed now, it was a bug in the base system, /etc/inc/crypt.inc was using some outdated logic. Copied n...
-
- Not fixed
-
-
- This was due to the OpenSSL version being upgraded on the base system. Lighttpd apparently has a bug that breaks with...
06/08/2010
-
11:38 PM Bug #640: Upgrade fails to create certficate
- forgot to add this to my original post, but once you have changed those options you can login to the webconfig and go...
-
- having this issue as well, as a temporary fix i changed the following in /var/etc/lighty-webConfigurator.conf
[cod... -
- When attempting to upgrade a 1.2 or 1.2.3 box to a 2.0-BETA1 2010-06-08 snapshot it fails to create a SSL certificate...
-
-----BEGIN CERTIFICATE REQUEST-----
MIIB7zCCAVgCAQAwgYUxCzAJBgNVBAYTAlhYMRIwEAYDVQQIEwlTb21ld2hlcmUx
EjAQBgNVBAcT...-
- After upgrade to latest snapshot (2.0-BETA1-20100608-0228) lighttpd not starting:...
06/07/2010
-
- Ermal Luçi wrote:
> As far as i know it should be ok on latest snapshots.
>
> Can you please before upgrading mak... -
- the md5 shown above matches the binary in the latest snapshot as of now, 20100604-1650.
-
- As far as i know it should be ok on latest snapshots.
Can you please before upgrading make sure no ipfw-classifyd pr... -
- No new snapshot from 3-6 !!
06/06/2010
-
-
-
01:48 PM Bug #374: "Register DHCP leases in DNS forwarder" doesn't work
- Yay, It works.
Thanks Ermal.
06/05/2010
-
- Strange, there can be a port ipfw-classifyd in last snapshot was not refreshed?
The behavior has not varied from the... -
- ...and if again to change back, are deleted all IP addresses from the interface, except the virtual. Even the main IP...
-
- Well, now the error does not occur. But now at change of type virtual IP the previous is not deleted.
I have repla... -
- if we click disconnect under interfaces and wait a bit then it connects automatically if dial on demand is ticked so ...
06/04/2010
-
09:53 PM Bug #302: Shaper wizard remembers values on error, but are disabled
- Still a problem in Sat May 29 17:47:52 EDT 2010 build.
All the traffic shaper wizards have the same issue (traffic_s... -
- This is apparently no longer an issue. I can't reproduce it on a current snapshot. It must have been fixed incidental...
-
- Many people will expect quality graphs to work "out of the box" with no extra work needed to set them up, especially ...
-
- I am not sure we should add this?
Most probably because stale files might occur if the gateway changes. -
- Committed to the snapshots. Test latest snapshot.
-
- Applied in changeset commit:"5523fa3d2d35067a33504f9d143039d60e957adf".
-
- Applied in changeset commit:"956950dea4f933af197b061b5e32a527544e375c".
-
- Try latest snasphots it has a fix.
Also available in: Atom