Activity
From 06/28/2013 to 07/27/2013
07/27/2013
- 09:35 PM Revision 9df039a8: fix typos
-
05:58 PM Bug #2882: 6RD not working in latest snapshots
- Hi guys,
For grins I opdated to the Sat Jul 27 build, ssh'ed into the firewall and and fired up "tcpdump -i vmx3f0... -
05:49 PM Revision 455bc0b1: Also catch adaX Fixes #3112
-
-
04:31 PM Bug #3113 (Resolved): WebConfigurator Firewall Rules->Aliases->Ports en_us Spelling correction
- "Enter as many ports as you wish. Port ranges can be expressed by seperating with a colon."
s/seperating/separating/ - 02:52 PM Revision 10a1f2da: fix title overlap
-
- Applied in changeset commit:455bc0b16dfec371e2f1ecc1d3786b120c28b6c1.
-
- Applied in changeset commit:ccf479876283082b39ac9a37c1c6308f4857a6f0.
-
03:48 AM Bug #3112 (Resolved): AHCI disk devices are not detected in Diagnostics > SMART Status
- AHCI* disks (/dev/ada#) are not detected in the Diagnostics > SMART status page.
According to diag_smart.php line ... - 12:14 PM Revision 9b03bd4c: improve gateway widget dimensions
-
- Confirmed to affect LEDs on both BCM57780 interfaces on J&W Minix D2550-HD motherboard.
-
12:33 AM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- IPv6 connectivity appears to survive the 4-day mark (renew) for me at this point. However, I am seeing an issue where...
07/26/2013
- 05:32 PM Revision 23c185bb: Merge pull request #731 from CharlieMarshall/graphs
- change traffic graph widget width & height to improve look for pfsense_ng_fs theme
-
05:00 PM pfSense Packages Bug #3109: pfBlocker disables firewall on nanobsd when no there is no internet access at boot time
- This works just fine on nanobsd 2.1RC. Never seen any such issue there.
-
08:14 AM pfSense Packages Bug #3109: pfBlocker disables firewall on nanobsd when no there is no internet access at boot time
- I tried the regular non-embedded version of pfSense and it does not have this behavior, I could only reproduce this w...
- 03:08 PM Revision 7c0e81ac: revert part of commit 4cfcbd3 - removes blank option on firewall log widget drop down menu
- 03:00 PM Revision d1775b4c: Merge pull request #733 from CharlieMarshall/logWidgetFix
- Tidy up and improve log.widget.php
-
- After Ermal's check_reload_status commits this morning I can no longer reproduce this after copying over a binary fro...
-
04:52 AM Bug #3083: Firewall rule toggle fails after several enable/disable cycles : 2.1 RC0 and 2.0.3 release
- Yes check reload does limit this events.
You have other issues if you do not rate limit it that this rate limit was ... - 11:34 AM Revision 15d18c11: Add 'ALL' interfaces as an option to the dropdown menu
- 10:08 AM Revision f95cfe52: fix drop down menu to correctly use selected and remember state
- 10:04 AM Revision f0ac4108: remove another whitespace
- 09:36 AM Revision faef4c77: remove white spaces
- 09:35 AM Revision fa050a56: revert part of commit 4cfcbd3 - removes blank option on firewall log widget drop down menu
-
09:34 AM Bug #3111: Passive FTP does not pass through pfSense with debug.pfftpproxy=0 (default)
- As a test case, ftp.dd-wrt.com allow to exhibit the bug.
-
- Since upgrade from 2.1-BETA to 2.1-RC0 7 Jun 2O13 snapshot, passive ftp from LAN to WAN function from time to time : ...
-
08:43 AM pfSense Packages Bug #3110 (Rejected): apinger down messages
- Hi,
I have two PF(2.0.3) with CARP. When I look at the system log in the master server I have seen some gateway down... -
- Improve picture widget size/proportion and stop border overlapping widget size
07/25/2013
- 10:03 PM Revision 28d3ac14: remove new line (opps didnt see this on previous commit)
- 09:47 PM Revision e220e513: remove text note
- 09:24 PM Revision 5330161e: remove whitespaces
- 09:23 PM Revision 46172e9c: improve picture widget size/proportion and stop border overlapping widget size
- 08:52 PM Revision e9cbf4b3: change graph display to improve look for pfsense_ng_fs theme
-
- I was finally able to reproduce this, but it wasn't quite so easy. I was able to do it for several minutes straight u...
-
01:13 PM Revision 4d814546: Optimization has nothing to do with limits
-
- 01:00 PM Revision 30c5f6a2: Mark input_errors as reference at do_input_validation declaration, it fixes #3108
- 12:59 PM Revision eb4ac13e: Mark input_errors as reference at do_input_validation declaration, it fixes #3108
- 12:33 PM Revision 9d81f904: Fix #3106, parse 'not' rules right on destination for port forward + reflection proxy rules
- 12:29 PM Revision 4ff2b805: Fix #3106, parse 'not' rules right on destination for port forward + reflection proxy rules
- 12:29 PM Revision ef561db1: Fix #3106, parse 'not' rules right on destination for port forward + reflection proxy rules
-
11:17 AM Bug #3108 (Resolved): Virtual IP creation allows submitting form without selecting a type
-
09:51 AM Bug #3108: Virtual IP creation allows submitting form without selecting a type
- jep, that did the trick.
I tested it on two pfsense boxes. on one machine I pulled the commit with playback gitsyn... -
- Applied in changeset commit:30c5f6a27b7cca2809e522c2898b828d445db2e1.
-
- Applied in changeset commit:eb4ac13e2552ad17fcef446725da5e38f3f7dc63.
-
- When adding a new Virtual IP on Firewall->Virtual IPs it is possible to create a virtual IP without selecting a Virtu...
-
- Hi Wet Willy,
I was only trying something ermal suggested.
Really the only thing I can say is that the firewall... -
03:04 AM Bug #2882: 6RD not working in latest snapshots
- Wel, Will. It seems as if you misunderstand the configuration options.
If Charter say IPv4 mask length = 0 that eq... -
- Hello,
I have had two routers running pfBlocker that, when booted after a power outage, all inside hosts hav... -
- Thomas Rieschl wrote:
> I'll try if OPTx interfaces are affected.
The problem doesn't occur on OPTx interfaces. w... -
- The error still seems to be there.
I erroneously created a new ticket for that bug (#3107). The problem didn't occur... -
04:21 AM Bug #2495: pfsense doesn't seem to know what its WAN IP is
- I am having problems with Snort starting up twice on boot while a new WAN IP is detected when there isn't really a ne...
-
- Applied in changeset commit:9d81f904d1572ae1cf648fa8f7f1d180172a4b6f.
-
- Applied in changeset commit:4ff2b8056ab4027a70d5e8dc9609702b802332af.
-
- Applied in changeset commit:ef561db1f552fb4851f1b5e7e2be07291b8337f7.
-
04:16 AM Bug #3106 (Resolved): NAT forward rule error
- I need to create internal port forwarding for SMTP with some exclutiosn, all SMTP goes to 192.168.0.15 except some IP...
-
- I believe this is a duplicate of #2495 - that one specifically mentions WAN, but the symptoms are otherwise identical...
-
- When adding an IP Alias (Firewall -> Virtual IPs) on a bridge interface the IP interface allocation somehow gets mess...
-
- Ok, this one was missed from my side.
Note: help message is missing this info>>>
"Enter as many hosts as you wou... -
12:37 AM Bug #3098: Advanced Options - Multiple State / Connection Controls Not Working
- The extra flexibility allowing relevant state-related advanced options to be used on UDP and ICMP, in addition to TCP...
07/24/2013
- 07:23 PM Revision 68c11b29: Fix #3103, cleanup ports fields when protocol changes
- 07:23 PM Revision 7fa503d8: Fix #3103, cleanup ports fields when protocol changes
-
03:56 PM Bug #3096: Limiters problem using Multi WAN
- I mean, "but if you could explain" instead of "but if I could explain". Sorry
-
- could you explain a little more? I've tried with floating rules and it works, but outgoing traffic going through the ...
-
- The only workaround for now is to add policy routes in the floating routes to direct the traffic where you want.
-
- We already have nested aliases (aliases inside of other aliases) to cover this scenario, and have since 2.0.
Given... -
- Some times in difficult rules sets we need to use more than 1 rule, because in one rule can be only one alias in Src ...
-
- Applied in changeset commit:68c11b29141fec71a7df753bd81a986270d41a49.
-
- Applied in changeset commit:7fa503d8f25b161d2d33e63aa7fda9a5bf4c2bd3.
- 11:42 AM Revision 140ed85e: Close td
- 11:42 AM Revision e7b5a057: Close td
- 10:26 AM Revision ee157757: Allow advanced options state-related parameters to be used for TCP, UDP and ICMP
- Allows the state-related parameters to be specified for UDP and ICMP as well as TCP. Discussed in forum http://forum....
- 09:04 AM Revision 98f4043e: Allow advanced options state-related parameters to be used for TCP, UDP and ICMP
- Allows the state-related parameters to be specified for UDP and ICMP as well as TCP. Discussed in forum http://forum....
-
- Allow advanced options state-related parameters to be used for TCP, UDP and ICMP
- 08:38 AM Revision 08597fcc: Allow advanced options state-related parameters to be used for TCP, UDP and ICMP
- Allows the state-related parameters to be specified for UDP and ICMP as well as TCP. Discussed in forum http://forum....
- 08:35 AM Revision 06d6a543: Allow advanced options state-related parameters to be used for TCP, UDP and ICMP
- Allows the state-related parameters to be specified for UDP and ICMP as well as TCP. Discussed in forum http://forum....
-
- thanks
-
06:41 AM
Bug #2651: traffic RRDs broken after upgrade to 2.1
- Upgraded from 2.0.3 to 2.1 RC0 recently, no issues with traffic RRD graphs. Issue looks to be fixed.
- 01:15 AM Revision 06ff126e: Update rrd.inc
- Fix this error
php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/system-mbuf....
07/23/2013
-
- Update rrd.inc
- 11:54 PM Revision df198169: Update rrd.inc
- Fix this error
php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/system-mbuf.... -
11:02 PM Bug #3098: Advanced Options - Multiple State / Connection Controls Not Working
- Corrected commit request for 2.1 branch: https://github.com/ky41083/pfsense/commit/a3ff93398a5cbec0e18960be36fd2fdc24...
-
- Commit request: https://github.com/ky41083/pfsense/commit/abb4614488bab34086c7c1adcf6748221644fc16
-
- I was looking more for something like this........ (patch attached). However, with your changes on the rule edit page...
-
10:25 PM
Bug #3104 (Closed): Upgrade 2.1RC0 code breaks RRD databases on nano
- After upgrading to 2.1-RC0 (i386) built on Tue Jul 23 09:56:03 EDT 2013 I noticed that my RRD traffic graphs are fail...
-
10:18 PM
Bug #2159: Upgrade code breaks RRD databases on nano
- I am also running nanobsd on a alix system
-
10:16 PM
Bug #2159: Upgrade code breaks RRD databases on nano
- I have also encountered this issue after upgrading tonight with 2.1-RC0 (i386) built on Tue Jul 23 09:56:03 EDT 2013....
-
- Ok, I have no other choice, I have to use 2 pfSense to route my IP to apply traffic limit, anyway if you think you ca...
-
- This is not easy to solve for 2.1 and probably will be done for 2.2.
The issue is known internally. -
04:15 PM pfSense Packages Bug #3102: bgpd not starting when "network" option is set in config file
- based on the man page of bgpd.conf (http://www.openbsd.org/cgi-bin/man.cgi?query=bgpd.conf)
the correct syntax is "n... -
-
-
08:56 AM Bug #3101: apinger: typo in logs
- https://github.com/Jajcus/apinger/commit/c7da72f7ec26eedd7fd8d224c0e10787b204f94e
-
- Pull request for typo fix to apinger submitted and accepted.
-
- Fix error in 2.1 branch dhcp6prefixonly implementation
-
- A checkbox has been added as part of the dhcp6 option to allow to use the pppoe interface as the interface for reques...
-
- There was another error in the way the "Request only a IPv6 prefix" checkbox code was originally applied on the 2.1 b...
-
- Yeah it fixed your issue but probably brought other issues.
I am still investigating how to better solve the other p... - 03:21 AM Revision af49447a: Fix error in 2.1 branch dhcp6prefixonly implementation
- The Main branch code was in the correct place, but the version applied to 2.1 branch had this code in the wrong place.
07/22/2013
-
- Use default RRD colors that are a little more visually distinct.
- 08:57 PM Revision f11a3926: Use default RRD colors that are a little more visually distinct.
-
08:26 PM Bug #3103 (Resolved): GRE port forward problem with changing protocol
- When changing the protocol on a port forward from one with ports to GRE, the port is retained where it should be wipe...
-
- openbgpd doesn't start with the default generated config file by the UI.
It also doesn't report any error in the l... - 03:06 PM Revision a7b49540: Fixes #3100. Fix spell and spaces issues
- 03:05 PM Revision 991549b4: Fixes #3100. Fix spell and spaces issues
- 02:29 PM Revision 174e627c: Merge pull request #721 from phil-davis/RELENG_2_1
- Validate firewall rule advanced options requirements (2.1 branch)
- 02:29 PM Revision dde5a629: Merge pull request #720 from phil-davis/master
- Validate firewall rule advanced options requirements
-
- This log entry is added by apinger, which is not maintained by pfSense. You should report the spell typo to apinger d...
-
- Just a small typo I've come across, syslog reports:...
- 12:17 PM Revision d580f7b0: Fix spelling mistake. Already fixed in other branches
-
11:46 AM Bug #3099: Checkboxes at the address-input, in Alias-Creating
- Crazy solution for this problem: I've tested Version 2.0 before on the same IP-Address and the Browser cached the row...
- 10:49 AM Revision 1101a891: Validate firewall rule advanced options requirements
- Checks that the user has selected a TCP Pass rule etc when using the state-related advanced options. Validates as per...
- 10:43 AM Revision 69364ab8: Validate firewall rule advanced options requirements
- Checks that the user has selected a TCP Pass rule etc when using the state-related advanced options. Validates as per...
-
- Applied in changeset commit:a7b495403c5aa55342685fb5a29ba2c0ba6063ee.
-
- Applied in changeset commit:991549b4283d37f871b98c94931990e580d24dbf.
-
- Both pull requests were merged.
-
- I have added pull requests https://github.com/pfsense/pfsense/pull/720 (Main) and https://github.com/pfsense/pfsense/...
- 07:52 AM Revision eac9f72b: Merge pull request #719 from phil-davis/RELENG_2_1
- When adding Port or URL alias default the alias type (2.1 version)
- 07:25 AM Revision eeb590ad: Add missing backup of gettytab
- 07:25 AM Revision bed55115: Add missing backup of gettytab
- 07:25 AM Revision 33e2fb05: Add missing backup of gettytab
- 05:23 AM Revision 45818646: When adding Port or URL alias default the alias type (2.1 version)
- When viewing the Port or URL aliases tab, and pressing "+" (add), make the default alias type match the Port or URL t...
07/21/2013
-
11:45 PM
Bug #2777: NAT-Port forwarding dont work in Multi-WAN configuration, if the first WAN Interface have an higher Tier.
- I have the same problem. Port forwards from a secondary gateway DON'T work. They only work if the default route is th...
- 10:26 PM Revision 4fbe5be0: Merge pull request #718 from N0YB/Advanced_DHCP_Client_Options
- Fix required options syntax typo
-
- This certainly won't fix all the sequence of problems reported here. Those who use this, please test with latest snap...
-
- Pull request has been merged into master and RELENG_2_1
-
- Request only a IPv6 prefix - checkbox saving fixed in pull request https://github.com/pfsense/pfsense/pull/716
-
- "checkbox" doesn't even exist at all in the source code for that page. Something is broken in your browser or you've ...
-
- I've downloaded the Version pfSense-2.1-RC0-i386-20130719-2150.ova and started it in VirtualBox. I'm also using the s...
-
- I have never seen this and can't reproduce it. Currently on 2.1-RC0 built on Tue Jul 16 16:31:36 EDT 2013.
Are you u... -
- If I create a new alias, there are checkboxes for the IP, Network, URL-Inputs instead of drop-down or input-lines.
- 08:28 PM Revision f669800c: Fix required options syntax typo
- 05:55 PM Revision b1a4d3a7: Merge pull request #717 from phil-davis/master
- When adding Port or URL alias default the alias type
- 05:31 PM Revision 09a68ea4: When adding Port or URL alias default the alias type
- When viewing the Port or URL aliases tab, and pressing "+" (add), make the default alias type match the Port or URL t...
-
03:46 PM Bug #3100 (Resolved): PowerD spelling mistakes
- Under System -> Advanced -> Miscelanneous -> PowerD:
Last sentence:
It rises frequency faster, drops slower andkeep... - 01:56 PM Revision 3dd6ed1a: Fix editing saving dhcp6prefixonly state
- Reported in redmine #3097 and forum http://forum.pfsense.org/index.php/topic,64483.msg350255.html#msg350255
- 01:55 PM Revision 4b8628b5: Merge pull request #716 from phil-davis/master
- Fix editing saving dhcp6prefixonly state
- 09:29 AM Revision 3b648a09: Fix editing saving dhcp6prefixonly state
- Reported in redmine #3097 and forum http://forum.pfsense.org/index.php/topic,64483.msg350255.html#msg350255
-
06:06 AM Bug #3092: Disable LRO not affecting Intel 10G NICs
- please reopen #1047.
07/20/2013
-
- Keith Hough wrote:
> Or better yet, since we already have elements that become visible or hide depending on the traf... -
- If someone can *update the ticket to "all versions" and "urgent"* as I can't imagine this isn't also the case with ev...
-
- Or better yet, since we already have elements that become visible or hide depending on the traffic type selected on t...
-
- The issue appears to be that these setting are *only* applied to TCP rules. This needs notation in the GUI.
Also, ... -
- *Issue:* Set "Maximum state entries this rule can create" on a rule (I set this on my BitTorrent rule and my default ...
-
08:47 AM Bug #3097: IPv6 over PPPoE is not working
- Hmzz,
Stupid, accidentally added myself as assignee, can't change it. -
- Dutch XS4All provider requires IPv6 DHCP inside PPPoE tunnel
Now the DHCP request is going over the physical interfa... - 01:32 AM Revision 3e2ecafe: 3652 days worth is a too much. Scale it back to more reasonable 1.25 x maximum used data (2284 days).
- 01:32 AM Revision 8b8594c4: Merge pull request #715 from N0YB/RRD_RRA_Sized_for_Previous_Period
- 3652 days worth is a too much. Scale it back to more reasonable 1.25 x maximum used data (2284 days).
- 12:15 AM Revision f1c252cf: 3652 days worth is a too much. Scale it back to more reasonable 1.25 x maximum used data (2284 days).
07/19/2013
-
-
- 01:18 PM Revision 166fc3cd: Minimize inclusion of bogonsv6
- If "Allow IPv6" is on, but actually there is no enabled interface with "Block bogon networks" enabled, then we also d...
- 12:58 PM Revision 04498edb: Merge pull request #714 from phil-davis/master
- Minimize inclusion of bogonsv6
-
- No, I do not use UPnP
-
12:50 AM Bug #3096: Limiters problem using Multi WAN
- do u have upnp enabled?
-
04:02 AM Bug #1629: invalid state table entries after WAN IP change
- I'm facing the samem problem with latest 2.1-RC. Anything we can do to get a solution?
07/18/2013
-
-
-
- I found that if I set HONDUTEL as default gateway the limiter works on the WAN, what can it be?
-
- As described here:
http://forum.pfsense.org/index.php/topic,64568.msg350101.html#msg350101
http://forum.pfsens... -
-
- 12:10 PM Revision 7f76f2df: Minimize inclusion of bogonsv6
- If "Allow IPv6" is on, but actually there is no enabled interface with "Block bogon networks" enabled, then we also d...
-
- Christophe B wrote:
> I don't think this has been solved yet. I downloaded "pfSense-LiveCD-2.1-BETA0-i386-20120831-1... -
04:28 AM Bug #2495: pfsense doesn't seem to know what its WAN IP is
- it's kind of working now.
following happens:
# _ifconfig_ - real (DHCP assigned) IP is on top of the virtual IPs
...
07/17/2013
-
-
-
-
- 03:29 PM Revision 09f26fb7: Remove remaining hardcoded theme names
- 03:29 PM Revision 7bc1b968: Remove remaining hardcoded theme names
-
-
-
-
-
-
- This resolved itself once the proper rules were open to all.
-
- This was added a couple weeks ago.
-
- Needs info on how to reproduce it before anything can be done.
-
- Duplicate of #1351 (which has since been fixed)
-
- This was fixed a while back, the directory has snapshots in it now.
-
-
09:56 AM Bug #3095 (Resolved): Name column uses old (original) interface name
- Name column uses old/original interface name (OPT1 in my case) when the interface has been renamed. The interface nam...
-
- Applied in changeset commit:298020b2b6efa75c863bafef9a078c285a2b9ed6.
-
- Applied in changeset commit:a5cd1c5a4286062b84caf32df860f2e2f2e204aa.
-
- Duplicate of #2227
-
05:44 AM Bug #3094 (Rejected): LDAP authentication, password with non-standard letters
- Hello,
I've been using LDAP authentication server for logging to pfSense webinterface for over a year now and everyt... -
01:36 AM pfSense Packages Bug #3093: squid3-dev missing libgssapi.so.10
- Possibly the AUTH_KERB compile time option should be removed or /usr/ports/security/krb5 built or Kerberos added to b...
-
12:31 AM pfSense Packages Bug #3093 (Closed): squid3-dev missing libgssapi.so.10
- On current snapshots (2.1-RC0 (amd64) built on Tue Jul 16 16:31:05 EDT 2013 FreeBSD 8.3-RELEASE-p8), the squid3-dev p...
07/16/2013
-
-
-
-
-
-
-
-
- 07:34 PM Revision eb8e0aa9: Call interface_ipalias_cleanup() after $interface is initialized, and get current IP after it
- 07:31 PM Revision de8f0075: Call interface_ipalias_cleanup() after $interface is initialized, and get current IP after it
-
-
-
-
-
-
-
-
-
-
-
- Hi ermal,
I fired up my July 12th pfsense vm and "6RD IPv4 Prefix length" only goes from 0 to 31 bits.
netstat ... -
- Hi ermal,
Charter specifies the following setting for their 6RD service:
6rd Prefix = 2602:100::/32
Bo... -
- I think you should set your prefix to /64 in your wan configuration hence the problems.
Also the netstat command i... -
- Hi ermal,
Here is the requested command output:
http://pastebin.com/e7QrYfzG
And here are the config.xml sec... -
-
-
-
-
- Not fixed yet
-
- It should be better on last snapshots
-
- Not fixed yet.
-
- Please check tomorrow's snapshot
-
-
-
-
-
- Applied in changeset commit:8a0c14c3e44b3ccf79db2dec4e836a6ca6367f75.
-
- Applied in changeset commit:1c8faa89b9aab2d7ab7aef9837d9c9e436ada9c7.
-
-
-
- It's not related to this issue, if you still have a problem please open a ticket for it.
07/15/2013
-
-
-
-
- 12:40 PM Revision f3fa5b69: Merge pull request #682 from CharlieMarshall/pfsense_ng_fs
- new theme "pfsense_ng_fs" & allow themes to add / delete additional widget columns
-
- can this be implemented like under NAT port forward page u select the interface group and the pfsense creates same ru...
-
- please reopen this bug
07/14/2013
-
08:15 PM Revision ab17ed4e: support mitigating BEAST attack
- According to http://redmine.lighttpd.net/projects/lighttpd/wiki/Release-1_4_30
"...by setting
ssl.cipher-list = "EC... -
- support mitigating BEAST attack, see http://forum.pfsense.org/index.php/topic,63001.0.html
- 06:49 PM Revision 23ea4d2a: services_dhcrelay6_configure developerspew debug text fix
- 06:48 PM Revision 64ad3cc8: Start DHCrelay6 on boot
- 06:24 PM Revision fa535f75: Correctly decide if dhcrelay is enabled
-
- Correctly decide if dhcrelay (v4) is enabled
- 04:15 PM Revision 4701c8de: Correctly decide if dhcrelay is enabled
-
- i have the problem on pfsense 2.1 RC0 latest snapshot
-
- the bug is not fixed. i have same problem with Intel X540-T2 and X520-DA cards. attached my configuration and output ...
-
- Duplicate of #1047. Comment there if it's not fixed.
-
- i found workaround using shellcmd package. i just run ifconfig ix(0-3) -lro using shellcmd, but i don't think that it...
-
- Hello,
i have firewall with 2 dual-port Intel 10G NICs, one X520 DA2 and one X540-T2. i checked disable LRO in web...
07/13/2013
- 06:52 PM Revision b5cd5163: Teach service start stop restart about dhcrelay6
- 06:52 PM Revision d86ec4e0: Consistent dhcrelay6 pid file location
-
- Teach services code about start stop restart of dhcrelay6
- 04:18 PM Revision 9590e0de: Teach service start stop restart about dhcrelay6
- 04:16 PM Revision 54a9d71d: Consistent dhcrelay6 pid file location
-
- Start DHCrelay6 on boot
- 02:42 PM Revision 63b8c4db: Fix #3091, fix bad var assignment
- 02:41 PM Revision 45eb8aeb: Fix #3091, fix bad var assignment
- 01:15 PM Revision 06433d75: Start DHCrelay6 on boot
-
- Grrr, missed one part of the patch... All works now:
- service started on boot
- Pv6 addresses assigned
- the enab... -
- Afraid the thing still does not get stopped with 711.
-
- Starting at boot is resolved by https://github.com/pfsense/pfsense/pull/710
Stop/start/restart and enable/disable of... -
01:02 PM Bug #3075: Can't delete unused Virtual IP "referenced by a least one gateway"
- Sent to forum on 9th July
http://forum.pfsense.org/index.php/topic,64326.0.html
I have just updated to the latest... - 12:49 PM Revision 874f099a: services_dhcrelay6_configure developerspew debug text fix
-
- Applied in changeset commit:63b8c4db3bebb0e203dd6903f310ca87ef3e8061.
-
- Applied in changeset commit:45eb8aeb5839b52af9f9e82cecdc5ed5579656f5.
-
06:57 AM Bug #3091 (Resolved): Bad variable assignment in apinger setup (gwlb.inc)? Not sure the fix
- About line 179 gwlb.inc:...
-
07:52 AM Todo #2942: PHP-Growl: Growl Talk Notifications UDP 9887 implementation deprecated. GNTP is the new standard notification protocol.
- Devs,
I know this isn't a core feature or functionality but with the research and solutions proposed, I'd apprecia... -
- Well guys, I got another panic when messing with FTP downloads from ftp://ftp-archive.freebsd.org/. (No serial consol...
07/12/2013
- 07:59 AM Revision 95cb619c: Substitute Product name in privileges
- 07:58 AM Revision 74bd3c3f: Substitute Product name in privileges
- 07:57 AM Revision e811fcbe: Substitute Product name in privileges
-
- properly handle custom-v6 dyndns entries in web interface
-
- properly handle custom-v6 dyndns entries in web interface
-
- Sadly, I keep hitting this with http://snapshots.pfsense.org:...
07/11/2013
-
-
-
-
-
-
-
- Weird... when the poor little thing really gets abused too heavily and runs out of RAM, I get php killed in system lo...
-
- For the record, it seems to be that when an ALIX is starved for RAM, somehow globals start disappearing unless they'r...
-
- Fixed by...
-
- > Once a cert is added to the CRL, the reason column is filled in.
Negative, Captain :-)
!http://i40.tinypic.co... -
- Tried it on a VM full install and ALIX both on a current snapshot, reason drop-down is always filled in for me.
-
- Is there a forum thread for this?
It works fine for me. Once a cert is added to the CRL, the reason column is filled... -
- As per subject.
!http://i40.tinypic.com/k0ndyu.png! -
-
-
-
- > Of course the best fix is to not stick spaces in a CN. :-)
Kinda troublesome when you already have tens and tens... -
- Of course the best fix is to not stick spaces in a CN. :-)
-
- Applied in changeset commit:2916a9051a4e60c64ecd2732b652a12696d3295e.
-
- This is still broken even with latest version.
-
- Please post in the forum for assistance in diagnosing the issue before opening a bug report. There isn't nearly enoug...
-
08:55 AM pfSense Packages Bug #3088 (Rejected): Squid log rotate
- After a system boot, squid don't suceed to rotate logs, so I need stop and restart squid to enable log rotate
-
- Merge to RELENG_2_1: Support for protocol 41 in rules, support for HE.net AAAA record updates, and support for custom...
-
-
-
-
-
- Applied in changeset commit:26f80aff92ea3f70301273d869d30c68d4b73d48.
-
- Defines a new DynDNS provider 'he-net-v6' for updating AAAA entries on
dns.he.net. -
07/10/2013
-
-
-
06:14 PM Feature #3087 (New): Setup Wizard does not include IPv6 options for interfaces
- The wizard which runs during the first login to the web-gui does not give options for configuring IPv6 on the LAN or ...
-
-
-
-
-
- Add support for HE.net AAAA record updates. Fixes #1825.
-
- config issue, not a bug
-
02:55 PM Bug #3086 (Rejected): OpenVPN tunnel traffic shaping
- I used pfsense to link two remote networks via openvpn. The tunnel will be used to encrypt VOIP between the two netwo...
-
- Also, the service does not start on boot, since there is no mention of services_dhcrelay6_configure() in /etc/rc.bootup
-
12:52 PM
Bug #2650: FTP helper breaks TCP sequence numbers on 2nd WAN
- The problem is still there, but now I have noticed an additional behavior. I have taken the liberty to email you some...
-
-
- This seems the same root cause as #2910
-
- Since this works for RFC2136 and he.net now, we can set it to partially done, but not completely done. (Redmine autom...
-
- Applied in changeset commit:4624f50fce5f1f41306d6852ca2922079b9d1694.
-
- Checkboxes for logging were added yesterday in commit:a19fcb824c8d443cafa42f7d826407e475f40fa8
Moving to "real" ru... -
08:53 AM Feature #371: Allow moving of bogon and RFC 1918 rules
- I'd have to agree with what Doktor Notor wrote above, and I'd rather strongly agree: this takes hours and hours to tr...
-
08:34 AM pfSense Packages Bug #3085 (Resolved): squidguard: problems when importing a blacklist archive containing soft-links
- I'm sure it's a quick-solved issue :
when importing a blacklist.tar.gz containing soft-links, the links are lost in...
07/09/2013
-
-
-
- > Please do not use redmine as a bug tracking.
Call me confused. Isn't bug tracking the whole purpose of issue tra... -
03:27 PM Bug #3083: Firewall rule toggle fails after several enable/disable cycles : 2.1 RC0 and 2.0.3 release
- Jim P wrote:
> That page shows the status of the _previous_ filter reload. If it was successful, it will say so.
> ... -
- That page shows the status of the _previous_ filter reload. If it was successful, it will say so.
Pressing the butto... -
- > Also, where is it stated that to reload the filter set after a rule change the user must navigate to this page and ...
-
- Doktor Notor wrote:
> Uhm... what do you mean by "manually"? Without clicking the button, the filter does not reload... -
- > I then did "Status->Filter Reload" but this time I clicked on the "Reload Filter" button manually. Bingo. The rules...
-
- Jim P wrote:
> Rather than doing a rule save, reboot, etc, wait a few moments and go to Status > Filter Reload, and ... -
- Jim P wrote:
> If you trigger too many filter reloads too fast it's possible that check_reload_status is eating the ... -
- If you trigger too many filter reloads too fast it's possible that check_reload_status is eating the reload events be...
-
- Chris Buechler wrote:
> not true. Has to be states. Maybe that in combination with something delaying your filter re... -
- not true. Has to be states. Maybe that in combination with something delaying your filter reload enough that a new st...
-
- Please see the description in my forum post for more details:
http://forum.pfsense.org/index.php/topic,64098.0.html
... -
-
-
- I added an option for this in commit:850324a23e45b3a11231f910290f8ff9b774d9bc a few weeks ago, forgot the ticket exis...
-
- Would you mind merging this into RELENG_2_1 as well?
-
08:56 AM Bug #3084: bsnmpd stopped working when openvpn is activated
- just saw this in my log files maybe it will help
@
Jul 9 15:54:47 php: rc.newwanip: pfSense package system has de... -
- hi,
when i activate openvpn my bsnmpd service stop working after 10 minutes or less ....
I always have to start i... -
- Still crashes easily.
I can reproduce it on a VM very easily. I have two test VMs with an OpenVPN tunnel in betwee... -
- Could you confirm if the problem persists on more recent snapshots?
-
-
-
-
-
-
-
-
- this log is only cosmetic, and already has a ticket. the other description is unrelated and not a known problem, but ...
-
12:54 AM Bug #3082: apinger: Error while feeding rrdtool: Broken pipe
- OK, it looks like a problem with Chrome.
We don't have the problem with IE, pretty weird.
Service -> Load Balancer ... -
- Tried restarted webconfigurator to no avail
Also rebooted the pfsense but problem still persist?? -
- Hello,
looks like the bug on rrdtool from 2.0.2 is still present in 2.0.3
Interface froze when choosing Services-... - 12:10 AM Revision e91abcc9: Fix #3079, add a section for DHCPv6 Server backup
- 12:08 AM Revision 63e9efc9: Fix #3079, add a section for DHCPv6 Server backup
07/08/2013
-
- Applied in changeset commit:e91abcc96e79808b71865d3e91c81ad5501328c3.
-
- Applied in changeset commit:63e9efc92f4eba3a74fcf98ee858b35261d394e0.
- 03:38 PM Revision dd042c51: Implement URL Table aliases for ports instead of IP addresses
- 02:20 PM Revision 174e151d: fix description
- 02:19 PM Revision ff6c9852: fix description
-
- my FW run pfsense 2.0.3 amd64
-
- Hi,
i have following setup:
em0 - 2 WAN interfaces (vlan 11,12) that receive IP using DHCP from ADSL modem. after... - 01:31 PM Revision df1b3eb7: touch up text
- 01:31 PM Revision e0658637: touch up text
-
- I have put a fix for this part in github *_"There is still a problem, I mean delete the file captiveportaldn.rules Wh...
-
- That bug is NOT fixed yet.
It still exists on 2.1-RC0 from "Sun Jul 7 20:34:30"
Please tell me if I can support you. -
08:12 AM Feature #1831: Captive portal IPv6 support
- Great work, and Thanks Cyrill.
Unfortunately I found another bug in the code, while setting up the CP for v6 in my... -
- Add support for protocol 41 in rules. Fixes #3007.
-
- Please do not use redmine as a bug tracking.
There is already a ticket open for ftp helper.
I pushed some patches... -
03:03 AM Bug #1351: Mobile IPsec no traffic pass trough after 2nd connect after 5 minutes
- IPSec with mobile clients on Current 2.1 RC's seems very reliable - various user reports are very positive. Thanks.
-
- Applied in changeset commit:8418a6df61356f93f95b2a1a6b8e0a9c02890088.
-
- Applied in changeset commit:25ce513631d4f1af53886982b0b7c7872e8b8edf.
07/07/2013
-
-
-
-
-
-
-
- Due to the typo, FilterIfList never got a 'track6-interface' entry,
which in turn prevented the DHCP6-related pass ru... - 08:51 PM Revision d7fb1715: Merge pull request #702 from razzfazz/master
- Fix typo in filter.inc. Fixes #3028.
-
- Defines a new DynDNS provider 'he-net-v6' for updating AAAA entries on
dns.he.net. -
- Due to the typo, FilterIfList never got a 'track6-interface' entry,
which in turn prevented the DHCP6-related pass ru... -
- Pull request here: https://github.com/pfsense/pfsense/pull/704
-
- Turns out the official name for protocol 41 is "IPV6".
-
05:15 PM Bug #3080 (Resolved): 2.1-RC0 (i386) - GRE Interface not getting correct/configured MTU at boot time
- I'm having a working GREoverIPSec + OSPF environment (Cisco C876 <-> pfSense). Today I just saw that a GRE interface ...
-
- Pull requests here: https://github.com/pfsense/pfsense/pull/703
-
- Applied in changeset commit:fc654f2c36186af8aaf59a1feedce5b343df1252.
-
03:50 PM
Bug #3028: Prefix delegation fails to add rules for dhcp6 traffic on tracking (LAN) interface
- Applied in changeset commit:d7fb1715a17566f1bd9013f88fd9b627479d8767.
-
- Applied in changeset commit:14e9b0526f4d41616994d57b3484c2fa0bf8183f.
-
- The existing statement causes the 'track6-interface' entry to never be added to _FilterIfList_, which in turn causes ...
-
- I believe the problem is in /etc/inc/filter.inc:870:...
-
- the current backup/restore mechanisms do not allow for the individual backup/restore of DHCPv6 settings.
They are... -
-
- 12:44 PM Revision a35c1cdf: Correct month, quarter (3 months), and 4 year RRD graphs length.
- Longest possible month is 31 days, not 32.
Longest possible quarter (3 months) is 92 days (30+31+31), not 93 (31+31+3... - 12:43 PM Revision c2bf84a1: Merge pull request #701 from N0YB/RRD_Graphs_Size
- Correct month, quarter (3 months), and 4 year RRD graphs length.
-
- Applied in changeset commit:ba581f076acc3068c37bd86c97656bf53b29781b.
-
- Applied in changeset commit:6efe0caeb3b2ec8ae39ce35aa0663ffa7501a146.
-
10:30 AM Bug #3078: NanoBSD upgrade gui confusing!
- Jim P wrote:
> I updated my ALIX and it correctly shows on the dashboard and the auto update check that it is curren... -
- I updated my ALIX and it correctly shows on the dashboard and the auto update check that it is current. The update ch...
-
- GT Zenny wrote:
> Also it would be nice to include the changelog of every build to save the life of the CF/USB devic... -
- I think this needs to be fixed to avoid confusion whether an upgrade has been made or not.
http://forum.pfsense.or... - 06:32 AM Revision 91c6c902: Correct month, quarter (3 months), and 4 year RRD graphs length.
- Longest possible month is 31 days, not 32.
Longest possible quarter (3 months) is 92 days (30+31+31), not 93 (31+31+3... -
- DHCP also update Dynamic DNS for static leases
-
03:39 AM Revision 2740f12c: Typo in configuration option
- Should be 'leases', not 'mappings'.
-
- Previously, Dynamic DNS is only updated for clients that get addresses from the DHCP address pool. Static mappings ar...
-
- As discussed on a forum thread http://forum.pfsense.org/index.php/topic,64144.0.html the patches introduced in commit...
07/06/2013
- 07:38 PM Revision 010639a8: Remove unecessary variable
- 07:38 PM Revision b91d0be3: Remove unecessary variable
- 05:55 PM Revision ee3bc703: Fix #2962, allow to remove VIP if gateway IP is on the interface's subnet
- 05:54 PM Revision ff9f40d5: Fix #2962, allow to remove VIP if gateway IP is on the interface's subnet
-
04:16 PM Bug #3075: Can't delete unused Virtual IP "referenced by a least one gateway"
- Thanks Renato!
-
- The fix for #2962 introduced this issue. I fixed it, please check tomorrow's snapshot.
-
- I'm not sure that I'm following you. Let's say my block of public IPs is as follows:
1.1.1.30 (gateway)
1.1.1.29
... -
- that input validation should only apply when it's the only VIP that exists in that gateway's subnet.
-
-
12:18 AM Bug #3057: DHCPv6 not working with Router Advertisements 'Assisted'
- Yes, now it's working without having to update services.inc from git.
- 10:46 AM Revision e66c4a0f: fix typo
-
10:26 AM Feature #3076: Gogoc client support
- Chris Buechler wrote:
> there are many supported tunneling offerings already that work fine with ISPs that don't sup... -
- there are many supported tunneling offerings already that work fine with ISPs that don't support or block v6.
-
- This is so extremely slow and unreliable service that I'd say this is a complete waste of time. Been using it for qui...
-
- Some ISP networks completely blocked the IPv6 protocol, so it would be good to have a different and a simple way to c...
07/05/2013
-
08:30 PM Revision ae737247: Update services.inc
- Turn on AdvManagedFlag and AdvOtherConfigFlag for both 'managed' and 'assist' ramodes.
-
-
-
-
- 05:29 PM Revision 5fb149ba: Remove unecessary var initialization
- 05:18 PM Revision d7deb24c: Remove unecessary var initialization
-
- I am working on some minor shuffling around of statics from my /29 block of IPs from my ISP. On 2.0.3 and 2.1 snapsho...
-
- Was the expected result of this revision to prevent the deletion of Virtual IPs that also exist in the same subnet as...
-
-
-
-
-
- It was pushed on master and not on RELENG_2_1, because of that you cannot see the change on 2.1-RC0 snapshots. I appl...
-
- And also with
2.1-RC0 (i386)
built on Fri Jul 5 06:53:51 EDT 2013
FreeBSD 8.3-RELEASE-p8
I need to get ser... -
- This worked, but on build
Version 2.1-RC0 (i386)
built on Thu Jul 4 03:04:00 EDT 2013
FreeBSD 8.3-RELEASE-p8
... -
- FWIW, tried with @truss /usr/sbin/traceroute6 -w 2 -m 18 www.google.com@ - it looks like it *does* actually make it t...
-
- Looks like the code was last touched (beyond irrelevant cosmetics) almost 4 years ago. Unlikely to have any fix.
-
- MTR is an entirely different type of test. Useful, but probably not one we'd include by default. And yes its GUI does...
-
- Hmmm well, not sure either, beyond either a shiny red warning (think about remotely managed boxes, cutting yourself o...
-
- I was able to reproduce it finally. I tried it on a few different pfSense boxes and FreeBSD systems, and I only could...
-
- BTW, installed mtr-nox11, no such issue:
HOST: gw.example.com Loss% Snt Last Avg Best Wrst S... -
- Not really required to uncomment anything there. It's endlessly visible in the process listing from console, till you...
-
- I can't reproduce this on current 2.1 code.
In the GUI we pass "-w 2" which waits a max of two seconds for a reply... -
- Applied in changeset commit:4454f1f34841b07c2f8e5aa95b3e0d9a9e0ed9a2.
-
- Applied in changeset commit:b877d6351c614f58b68a3ab2c7b04ea7ea282961.
-
- Please, revert these patches ASAP. They hard crash the box with FTP! http://forum.pfsense.org/index.php/topic,64144.0...
- 12:12 PM Revision abe411ad: Fix a small issue when disable a boolean option and save, it shows option as enabled
- 12:11 PM Revision 6a605eec: Fix a small issue when disable a boolean option and save, it shows option as enabled
- 12:09 PM Revision 277fd8db: Fix whitespaces
- 12:08 PM Revision ae6d9444: Fix whitespaces
- 12:04 PM Revision 80dc15eb: Remove extra { wrongly added on last commit
- 11:56 AM Revision c3cbe91e: Fix whitespaces
- 11:56 AM Revision 810c6a96: Process zipped aliases list
- 11:56 AM Revision 6a9a0736: Remove useless code
- 11:54 AM Revision db0aa52a: Fix whitespaces
- 11:47 AM Revision 6fab0f03: Fix set/unset of checkaliasesurlcert
- 11:47 AM Revision 86ffa26d: Process zipped aliases list
- 11:47 AM Revision 76590ffe: Use download_file() and check ssl certificates
- 11:47 AM Revision abc7b6a2: Remove useless code
- 11:47 AM Revision ffd7802a: Create a function to download a file using curl
- 11:47 AM Revision 08b861a8: Add an option to check certificate for https URL aliases
-
- This should behave better with tomorrow snapshot due to a fix done in gateway monitoring.
Can you confirm this is th... -
-
-
-
- Applied in changeset commit:0ee96a458ab93ff451c9bb32b1b8bc20e13866e6.
-
- Applied in changeset commit:86573a248608ff5b166eb77e962f97e91df159d2.
-
- All good now... thumbs up! :) Proper rules generated and DHCPv6 traffic no longer blocked on ifaces with relay enable...
-
- The attached patch should fix it, but it would be better to test it before committing. Let us know if it helps.
-
- Related forum thread: http://forum.pfsense.org/index.php/topic,64168.0.html
-
- Looking at this part of filter.inc, I don't think it deals with this configuration correctly.
@
if ((is_array... -
09:18 AM Bug #1629: invalid state table entries after WAN IP change
- I am also affected by this bug in 2.0.3.
In my case not a changed ipadres on my WAN, but a dual Wan setup with failo... -
- Related forum thread: http://forum.pfsense.org/index.php/topic,64168.0.html
-
- This is very, very broken. It can never be stopped via disabling the checkbox and clicking save. On subsequent enabli...
-
07:20 AM
Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
- Glad to report that the firmware update I just installed (details below) seems to work.
Will continue to monitor ... -
- Jun 4 snapshots are even better for this.
-
- Applied in changeset commit:265be6f5ab7d5546a8f26ae6bcae33712f861102.
-
- I pushed some fixes for this.
On newer snapshots it should behave as expected. -
- Applied in changeset commit:63356262a7f3f82b97d029d983fff0132030e539.
-
- Applied in changeset commit:f4a8e38c6ed250e9a18c4e472481541198231cdb.
-
- The only option for now seems to create rules with allow-option advanced setting set.
-
- You can touch /etc/php_dynamodules/module_name and rc.php_ini_setup will pick up on it and load the module (if the mo...
07/04/2013
-
- it's already there
-
- This is not a bug, sorry for the mistake.
-
- Would be too much to ask to include the php mysql extension by default in the next snapshoots? I use a custom authent...
- 01:42 PM Revision 079d1952: Add a new alias type, URLs containing Ports
- 01:40 PM Revision d9f33a7f: Add group_ports()
-
12:11 PM Bug #2762: PF drops IPv6 packets with fragment header followed by a last fragment only
- PS: It is not broken or weird behaviour (according to the RFCs). RFC 6145 (translating IPv4 <-> IPv6) specifies:
<... -
- Hrm seems it should work by default as i was brought to attention.
You sure it asks for interface assignment during b... -
09:37 AM Feature #3070: ova image wan configuration
- locally I could do it. True. The point is that I'm trying daily to download a snapshot from your snapshot server, run...
-
- You can just modify the default config.xml in the repository and that will give you that.
I do not think this will g... -
- Hi,
there is any possibility to generate the ova image with the WAN already configured to em0? I'm writing Cucumbe... -
- today I tried to download the last ova snapshot and looks like the virtualization folder is empty
http://snapshot... -
-
-
-
-
-
- Update interfaces.php
-
- While at it, it would be really useful to include /etc/version.lastcommit directly in the snapshots filename.
-
- Hi, to do test automation, it would be great to have on your snapshot server a link to the last build version. Today ...
- 01:06 AM Revision 3e3aeb8b: Update interfaces.php
- Remove errant double quote.
-
- Remove errant double quote.
- 12:46 AM Revision e00fafb3: Remove errant double quote.
07/03/2013
-
- As simple as trying to run IPv6 traceroute to www.google.com from the GUI:
@ 2 gige-g2-20.core1.prg1.he.net 3.31... - 03:52 PM Revision 581fa606: Merge pull request #692 from mgsmith1000/master
- Omit IP warning if HTTP_REFERER check is disabled.
- 03:50 PM Revision f0f1737b: Merge pull request #691 from mgsmith1000/RELENG_2_1
- Omit IP warning if HTTP_REFERER check is disabled.
-
03:36 PM Revision 31677598: Omit IP warning if HTTP_REFERER check is disabled.
-
-
-
-
-
-
-
- thanks!
-
- You can provide a patch and it will be evaluated!
-
08:36 AM Feature #3068 (Needs Patch): Notifications/Alerts - custom script
- Would be great to have an option in the notifications to execute a custom script.
-
- Please test with latest gitsync or tomorrow snapshots.
There were some fixes doen related to this as well. -
07:25 AM Bug #2878: radvd does not restart properly
- Tom M wrote:
> I am still seeing this issue. I have turned off Track Interface for DHCP on my LAN Interface and ipv6... -
- modified radius function to release the pinene if the client is not authenticated properly, and modified function cap...
-
- Modified radius function to release the pinene
-
- modified radius function to release the pinene if the client is not authenticated properly, and modified function cap...
-
- Not an easy one for 2.1
-
- Merging of the patch has been done.
Thank you. -
- not a bug, VIPs aren't always necessary for 1:1 NAT so they can't be prohibited from being removed because of 1:1 NAT...
07/02/2013
-
- Can we please do something about this? Or make a checkbox for logging (http://forum.pfsense.org/index.php/topic,34436...
-
09:27 PM Bug #3001: Captive portal Voucher sync on HTTPS with custom port
- Captive portal log also shows successful sync.
-
- Ok, I have tested this and it works properly. I've setup two VM's with three interfaces each. WAN (192.168.17.0/24), ...
-
- Alberto, it will be much easier if you put the changes in GitHub. Then the developers can easily see the differences,...
-
- Only correct a sentence, I meant that I hope will serve out the modification, instead of "I hope you learn the contri...
-
- Excuse the mess in the text above, I did not know how to modify it, please if anyone can fix it, thanks
-
- Limiters:
02002: unlimited 0 ms burst 0
q133074 100 sl. 0 flows (1 buckets) sched 67538 weight 0 lmax 0 pr... -
- Ok, I'm working on a solution, and found the problem in the code, I put the fix and I'm probing now, it appears that ...
-
- Version 2.0.3 is also affected by this problem.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
06:59 PM Bug #3067 (Rejected): Virtual IP Removal
- I noticed that pfsense allows you to remove Virtual IPs that are currently in use in a 1:1 NAT which will cause issue...
-
-
-
05:06 PM Bug #3066 (Rejected): Proxy ARP failing with kernel error
- Hello, having trouble using Virtual IPs. My problem was worked around by using an Interface alias.
It appeared I w... - 04:22 PM Revision 98d5e234: Repect global conf_path
- 04:22 PM Revision 5e3356d7: Repect global conf_path
-
- I am still seeing this issue. I have turned off Track Interface for DHCP on my LAN Interface and ipv6 is now only tur...
-
- Can you please confirm that this is not anymore an issue?
-
- Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP
-
- Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP
-
- that's intentional for the time being. There's another ticket open on it.
-
- Hi,
I've just noticed that the sync of firewall rules description "eats" the char ">"
For example, on Firewall1... - 10:37 AM Revision dc63650a: Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP
- Definitely requires my patches to the kernel patches to work (dscp.RELENG_*.diff). OTOH, it is currently broken anywa...
- 10:34 AM Revision 1227101b: Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP
- Definitely requires my patches to the kernel patches to work (dscp.RELENG_*.diff). OTOH, it is currently broken anywa...
- 10:13 AM Revision 492b1314: Fix the RRD RRA’s to collect the correct amount of data for the Previous Period view for each resolution.
- Applied when RRD's are created.
RRA:AVERAGE:0.5:1:1200 = 20 hours of 1 minute data
RRA:AVERAGE:0.5:5:720 ... - 10:12 AM Revision da9a0ad0: RRD Specify RRA and Resolution
- Don't leave it up to RRD Tool to select the RRA and resolution to use.
Specify the RRA and resolution to use per the ... - 09:50 AM Revision 70d36e38: Adjust archives array values to match sizes for average calculation.
- 09:50 AM Revision 086d941d: Archive start is “now” minus archive length. Not “end” minus archive length. Sometimes "end" is not "now".
- 09:48 AM Revision 5ce5439f: Merge pull request #685 from N0YB/RRD_RRA_Sized_for_Previous_Period
- Archive start is “now” minus archive length
-
09:27 AM Revision a13acc0e: Add a checkbox that can be used to request only a IPv6 prefix without a IPv6 address. Some ISPs DHCP6 servers will fail the request if both are requested and only a Prefix is allowed.
- Conflicts:
usr/local/www/interfaces.php -
-
07:37 AM Bug #3064: Broadcom BCM57780 Nic lights not working (Activity and Link)
- The patch link is not correct, here is the correct one - http://svnweb.freebsd.org/base/head/sys/dev/bge/if_bge.c?r1=...
-
- It appears that the freeBSD 8.x and even the 9.X code has a bug where once the network is configured it turns off the...
-
04:51 AM Bug #3063: system will crash after "PowerD" enabled.
- Hardware: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz, Normal PC.
I did not find any obvious message about this f... -
- I am using pfsense as a transparent firewall.
I found the system would be hanged(no any message) in a few minute, ... -
-
-
-
- Can you try with tomorrows snapshots.
-
- confirmed fixed
-
- Also, I have replicated the test by Josh Stompro above (changing an existing alias used by a static route from IP to ...
-
- I have tested this with the latest build and it works as intended. I created two aliases, one with a FQDN and one wit...
-
- I have tested this and can confirm it works properly (2.1-RC0 - Jul 1 15:22:23 EDT 2013). I created a new shaping rul...
-
- confirmed fixed in testing and on customer's production system where problem was discovered.
07/01/2013
- 10:42 PM Revision 24646d57: Adjust archives array values to match sizes for average calculation.
- 10:38 PM Revision 641f2f3c: Archive start is “now” minus archive length. Not “end” minus archive length. Sometimes "end" is not "now".
-
- Captive portal does not correctly release pipe numbers, is continually increasing them until they are exhausted, and ...
-
- Closed per submitter request
-
- You can close this bug
-
- Add show/hide to the new "Reject Leases From" row
- 10:16 AM Revision c54b4586: fix typos
- 07:46 AM Revision 63c704c3: Add show/hide to the new "Reject Leases From" row
- Show for Basic and Advanced. Hide for Config File Override.
-
- /etc/bogons is back to the short couple of lines version and /etc/bogonsv6 is empty after every snapshot update. Woul...
-
- According to http://redmine.lighttpd.net/projects/lighttpd/wiki/Release-1_4_30
"...by setting
ssl.cipher-list = "EC...
06/30/2013
- 02:32 PM Revision cafb7dfe: change css & jquery to allow for multiple columns for themes ending in _fs
- 02:15 PM Revision 60695c6a: update loader.js - add jquery to display additional column button and create/delete columns
- 02:02 PM Revision c73a2a29: update css to fit full screen
- 01:58 PM Revision db83bdf9: Merge pull request #676 from N0YB/RRD_RRA_Sized_for_Previous_Period
- Fix the RRD RRA’s to collect the correct amount of data for the Previous Period view for each resolution.
- 01:57 PM Revision 1a03f646: Merge pull request #675 from N0YB/RRD_Specify_RRA_Resolution
- RRD Specify RRA and Resolution
- 01:55 PM Revision bc82e331: Merge pull request #671 from wrboyce/master
- allow defining dhcp static mappings using dhcp-client-identifier
- 01:50 PM Revision 61ef14bb: Merge branch 'Advanced_DHCP_Client_Options' of https://github.com/N0YB/pfsense into N0YB-Advanced_DHCP_Client_Options
- Conflicts:
usr/local/www/interfaces.php - 01:45 PM Revision ca794dd1: clone pfsense_ng theme
- 12:21 PM Revision 2cfde694: Handle comma-separated list arg to rc.openvpn
- The argument passed to rc.openvpn can be a comma-separated list of gateways - not just 1 gateway. Enhance the code to...
- 12:19 PM Revision 43d7e83e: Merge pull request #681 from phil-davis/master
- Handle comma-separated list arg to rc.openvpn
-
- It was changed only on 2.1, not 2.0.x, because of this you still see the issue on 2.0.3. You can apply the change on ...
- 04:09 AM Revision 7ef9de3f: Handle comma-separated list arg to rc.openvpn
- The argument passed to rc.openvpn can be a comma-separated list of gateways - not just 1 gateway. Enhance the code to...
-
03:18 AM Bug #2998: Diffserv Code Point options misleading
- I decided to go for the "minimally invasive" approach:
1. I added the CSx itens to the drop-down box.
2. I fixed ...
06/29/2013
- 11:42 AM Revision 216c80dd: Added previously missing class selectors cs1-cs7 plus VA (voice-admit), plus the TOS values which still work with DSCP
- Also removed the ranges 1-64 and 0x04-0xfc, which never ever have worked as expected (the kernel code does not recogn...
- 11:33 AM Revision 6e0d8f82: Added previously missing class selectors cs1-cs7 plaus VA (voice-admit)
- Definitely requires my patches to the kernel patches to work (dscp.RELENG_*.diff). OTOH, it is currently broken anywa...
-
05:43 AM Bug #2626: Patch included: syslog.conf allows duplicate logging of daemon.info messages (e.g. from snort or dnsmasq)
- Just updated to 2.0.3; this problem is still here (or came back), with the same cause as before. In my installed copy...
06/28/2013
-
08:14 PM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- I'm also looking forward for the solution of this. I currently halt my 14 sites installation until the bug will be fi...
-
-
-
-
-
- http://forum.pfsense.org/index.php/topic,63941.0.html
-
- After several weeks looking for the origin of the problem exposed in this forum, I concluded that the problem occurs ...
-
-
-
01:05 PM Bug #2919: IPv6 - WAN and LAN (DHCP-PD) does not renew address
For the very first time, I have been able to go over 4 days without loosing IPv6 addressing. This is very positive...-
- That happens when a package has failed to reinstall, which is a problem with a specific package in most cases. Check ...
-
- 1. I have posted this in the forum at http://forum.pfsense.org/index.php/topic,63793.0.html
The upgrade status scr... -
- Add Dyn Dns Euro Dns Provider
Also available in: Atom