Activity
From 09/17/2013 to 10/16/2013
10/16/2013
-
08:58 PM Bug #3271 (Rejected): NAT UDP to port range creates rdr for all interfaces, and no nat rule.
- The nat rule asking for a port forward on one interface (em0/WAN):
INET1MC UDP * * 97.64.213.58 15000 - 15400 ... -
12:44 PM Bug #3270 (Resolved): Disabling VLAN interface disables vlan port, enabling the interface doesn't enable the vlan port
- Describing the steps to reproduce the effect I've noticed:
1. Interfaces: VLAN > Create VLAN on interface
2. Chec... - 12:18 PM Revision 78b0e51e: Fix #3268 - avoid pf table names conflict:
- . Create a list of reserved table names for the hardcoded ones
. Use this list to validate aliases and load balance p... - 12:18 PM Revision c48fdaa4: Fix #3268 - avoid pf table names conflict:
- . Create a list of reserved table names for the hardcoded ones
. Use this list to validate aliases and load balance p... -
11:48 AM Bug #3269: Problem System: Certificate Authority Manager
- Yes, MD5 is insicure, but untill yealink don't update your ip-phone for SHA support is impossible use this phone with...
-
11:36 AM Bug #3269: Problem System: Certificate Authority Manager
- Offering stuff known to be insecure since 2008 at least on not an option. Ditch the crappy HW. http://www.win.tue.nl/...
-
- From pfSense 2.0.1 to 2.1 when you create a certificate, (in pfSense 2.1) you must select an algorithm (Sha1 , sha256...
-
07:20 AM Bug #3268: Load balancer needs input validation to prohibit reserved table names
- Applied in changeset commit:78b0e51e9a135804bfea307ea30c25fe16473da1.
-
- Applied in changeset commit:c48fdaa40effe9edc8bb4fb933e124a93cb24a0d.
-
05:16 AM Bug #742: apinger doesn't recover opt wan when connection returns.
- i have a similar issue but in some ways its different, my isp sometimes blocks all traffic to internet and only gives...
-
02:53 AM Bug #742: apinger doesn't recover opt wan when connection returns.
- Same issue for us on pfsense 2.1 Release:
if opt3 goes down, it doesn't recover and the "last check" time on /status...
10/15/2013
-
10:49 PM Bug #3257: IP Alias on CARP IP doesn't work where IP alias above CARP parent in list
- *How to reproduce this:*
I ran into this bug when I modified a setup pulled in from PFSense 2.0.x that looked like t... -
10:06 PM pfSense Packages Bug #999: vhosts does not show up as started
- I can confirm this is still an issue with the package. It seems to work outside the fact there is no way to know if ...
-
08:09 PM Bug #3045: NTPD crash / doesn't come up
- also line
driftfile /var/db/ntpd.drift
seems to be involved.
those really seems to be directory permission is... -
- Problem seems to be related to line:
statsdir /var/log/ntp
in /var/etc/ntp.conf.
After commenting this line, n... -
- Issue just presented to me as well, on both members of cluster (pfSense 2.1 stable), Server SunFire X3-2...
I can at... -
01:36 PM Bug #3045: NTPD crash / doesn't come up
- It is also incredibly inconsistent. If I wait an hour and try to start, perhaps ntpd will start without issue and run.
-
- Seeing this exact same issue on 2.1 Release i386 and amd64. I have attached my ntpd.core from an i386 install here. T...
-
04:22 PM Bug #3268 (Resolved): Load balancer needs input validation to prohibit reserved table names
- Reserved table names aren't prohibited from being entered as a table name in load_balancer_pool_edit.php. At least <s...
- 01:30 PM Revision c858a035: Merge pull request #817 from stephanel/master
- Added OVH DynHOST in dynamic DNS services
- 01:10 PM Revision 09dfec24: Merge pull request #819 from CharlieMarshall/responsive
- make dashboard responsive (theme pfsense_ng_fs)
-
- Reopen it since pull request was not merged yet
-
- thanks!
10/14/2013
- 07:33 PM Revision b18a99d3: some tidying up
- 07:27 PM Revision e5e0fd39: make dashboard responsive
- 06:54 PM Revision 4a913451: Add Captive Portal Zones privileges definition. Fix #3216
- 06:53 PM Revision 8deaf333: Add Captive Portal Zones privileges definition. Fix #3216
-
- Applied in changeset commit:4a913451bba01ac65dcaedf31e24fcd938bbe0a2.
-
- Applied in changeset commit:8deaf333f25dc18d461d7f2b0e61b1b2c1a64ace.
-
- Is the issue still happening?
10/13/2013
-
08:01 PM Bug #3249: DHCP Server/DHCP Relay both say the other is started
- I found that config from before. I've attached it.
-
03:30 PM Bug #3267 (Closed): Can't skip wizard by clicking the pfSense logo, can't finish it normally either
- I recently set up 3 new pfSense installs (all on 2.1 final), and on all 3 I had a problem with the Setup wizard - bot...
-
- And in the category of 'somewhat evil hack that works':
If you have a master/backup pfsense setup AND
you have mo... -
- Jim,
Doing as you suggest does solve the problem for the site-site server side in a Master/Backup HA situation wi... -
- Jim, welcome news indeed. Please then change
"Interface : Whichever interface you want the server to use for incom... -
01:02 PM pfSense Packages Bug #3266 (Rejected): Synchronize OpenVPN + Site-Site = Fail
- This works fine on 2.0.2+ if you select a CARP VIP as the "Interface" for the VPN, the system automatically stops the...
-
- Update: Should have written: the 'Disable this server' and 'Disable this client' button should be forced 'ON' when ...
-
- The 'Synchronize OpenVPN' HA checkbox prevents site-site OpenVPN from working in primary/backup setups. Two enabled ...
10/12/2013
-
- its just a GUI bug i guess so can be fixed easily, the bug is in the edit page, it seems to strip the portion after /
-
- yes i have the 2.1 release in 2 alix boxes and 2 full installs and its same on all, happens all the time
10/11/2013
-
06:13 PM Feature #3265 (Closed): PATCH: auto-scale ramdisks on embedded platform based on RAM size
- per http://lists.pfsense.org/pipermail/list/2013-October/004934.html
see attached patch
(Yeah, I'm just guessing... - 01:59 PM Revision babc58d3: Allow special chars to be used on IPSec mobile login banner. Fixes #3247
- 01:59 PM Revision b4a62651: Allow special chars to be used on IPSec mobile login banner. Fixes #3247
- 12:20 PM Revision a518b337: Set default value to radius_protocol during upgrade, it should fix #3226
- 12:19 PM Revision 2d72659a: Set default value to radius_protocol during upgrade, it should fix #3226
- 11:25 AM Revision 0f0f7b2c: Fix 'Packet loss rate' and 'Bucket Size' range checking
- 11:25 AM Revision 7e7a65b0: Fix 'Packet loss rate' and 'Bucket Size' range checking
- 09:20 AM Revision feb2e013: Remove redundant test for OpenVPN resync_needed
-
- Applied in changeset commit:babc58d30843cb388559178b60aecd7a9a64bcca.
-
- Applied in changeset commit:b4a62651f8bf6e67e812b904f98c90c481a0d4c9.
-
- I added and edited URL Table aliases lots of times and couldn't reproduce it. Is it happening all the time? Are you r...
-
- Applied in changeset commit:a518b337a94bc1b5415599899d7ad01bb6a1d666.
-
- Applied in changeset commit:2d72659aec4d153ec6401ccae2a90153e45accc6.
-
06:39 AM Bug #3259: firewall_shaper_vinterface.php does NOT save Packet loss rate and Queue size
- Confirmed. My appliance tells
2.1-RELEASE (i386)
built on Wed Sep 11 18:16:50 EDT 2013
FreeBSD 8.3-RELEASE-p1... -
- Are you running 2.1-RELEASE? I double checked 2 different systems and it's working as expected.
- 04:28 AM Revision b35bcd45: added favicon to logged in pages
-
04:26 AM Bug #3264 (Rejected): Double traffic on vlan interfaces "out" side
- Tested on amd64 arch version 2.1 with vlans over aggregated and single interfaces. The stats show that the traffic ov...
-
- added favicon to logged in pages
- 02:46 AM Revision cfa352c6: added favicon to logged in pages
10/10/2013
-
-
-
-
-
-
- In the page status_graph.php the IPs in the list are only from the interface subnet. This does not work when that int...
-
- Duplicate of #3173, already fixed on 2.1.
-
07:26 AM Bug #3262 (Rejected): BUG in rules application when setting a group gateway
- Dear,
I will try to explain the problem.
First , we have 2 WAN :
* WAN1 (PPOE)
* WAN2
We have configure a ... -
04:57 AM Feature #3261 (Needs Patch): RRD Graph Change
- Would it be possible to have the feature to allow a change from the 95th Percentile to whatever value we like. I.E 90...
10/09/2013
- 07:01 PM Revision a4a56eb0: Added OVH DynHOST in dynamic DNS services
-
-
-
-
-
-
-
-
10:14 AM Bug #3118: Main menu drop-down closes before selection in Chrome on Linux Mint 15
- I'm having this issue as well. Ubuntu 12.04x64 with Chrome 29.0.1547.76
-
- Applied in changeset commit:6f4a2864ad0e83f152a0cdc9c157f5d95aa8a9c7.
-
- Applied in changeset commit:0476134494c5e6079b7a98d53732b9448bc69435.
-
09:09 AM Feature #3260 (Resolved): Add ability to see a summary list of IP addresses for currently connected mobile IPsec clients
- When mobile IPSec clients connect they are given a virtual IP from the Virtual Address Pool. On the IPSec status page...
-
- The form on firewall_shaper_vinterface.php ignores the values entered in the fields:
Packet loss rate
Queue size
... -
03:40 AM Feature #3258 (Resolved): Allow multiple certificates to be revoked in a single step
- If you have to revoke more than once certificate, the process is pretty cumbersome because you have to edit the CRL a...
10/08/2013
-
07:58 PM Bug #3257: IP Alias on CARP IP doesn't work where IP alias above CARP parent in list
- I have tested now again and saw that problem resource is if CARP Ip is defined after IP Alias (order priority problem...
-
- Sorry, affected version is 2.1
-
- I have 300 over IPs in 3 different subnets. I have added 3 different CARP IPs from each subnet. Other IPs on them as ...
-
05:31 PM Bug #3256: dnsmasq replying with incorrect address
- Seems to go back to normal/proper responses after an unknown amount of time as well.
-
- Not the iphone...
-
- Using nslookup from multiple windows 7 clients, got a reply of another DHCP client's address for multiple queries of ...
-
- I just got bitten by this as well, running 2.1-RELEASE (i386). See attached.
I also can verify that turning off the... -
03:13 AM pfSense Packages Bug #3056: Unbound not getting IPv6 host overrides
- David Wood wrote:
> At this moment, with the last commit being 4dfc14961006b0702d1c5e18190b3fcd64dd4d76 , the typo I... -
- Applied in changeset commit:ec6f62c13304169f44ee47d21a09373cf6f4fd22.
-
02:45 AM Bug #3255: OpenVPN client or server on GWG does not failover
- This is fixed by https://github.com/pfsense/pfsense/pull/813
-
- If I have a GWG "OpenVPNGWG" with WAN1=tier1, WAN2=tier2 then the initial OpenVPN client or server on "OpenVPNGWG" co...
10/07/2013
-
- thanks
-
06:26 AM Bug #3240: CoDel not applied on non-priq queue types
- Fix confirmed working.
-
- Pull request was already merged
-
-
- Fixed for me.
-
- Pull request was merged, please confirm it fixed the issue.
- 05:38 PM Revision e390d664: Replace pfSense with the rebrand
- 05:36 PM Revision 7add9de0: fix text - add space between sentences. This got lost in another commit
- 05:35 PM Revision 2b4f2f23: Replace pfSense with the rebrand
- 05:35 PM Revision 2df0e712: Replace pfSense with the rebrand
-
04:21 PM pfSense Packages Bug #3056: Unbound not getting IPv6 host overrides
- At this moment, with the last commit being 4dfc14961006b0702d1c5e18190b3fcd64dd4d76 , the typo I mentioned is in line...
-
03:15 PM Feature #3254 (Closed): Add DNS controls for radvd on tracking interfaces
- Radvd only distributes the local interface link-local address of the tracking interface as a DNS server when the DNS ...
-
11:30 AM Bug #3216: PFSense 2.1 - Captive Portal Zone - is not avaible in user effective privileges
- I was able to work around this.
Add the lines below to /etc/inc/priv.defs.inc (Toward the end but anywhere as long... -
07:17 AM Bug #3250: problems with ixgbe driver in pfsense 2.1 release
- Hi,
thanks for update.
any due date for 2.1.1 release? -
- Please send the patch as a pull request on github.
10/05/2013
-
01:11 PM Bug #3205: Partial system freeze when disconnecting USB 3G stick
- Same here. Huawei E1820. 2.1 RELEASE on physical VIA EPIA and VirtualBox.
First time configured without problems, t...
10/04/2013
-
03:34 PM Bug #3252 (Rejected): Diagnostics-Tables inconsistency
- See attached files.
!pfsense_aliases.png!
!pfsense_tables.png!
Diagnostics-Tables does not return consistent r... -
-
- 11:41 AM Revision 9e3cc25b: use (self) instead of any for web lockout
- 11:40 AM Revision c3b9bcb2: use (self) instead of any for web lockout
-
- I pulled the dhcrelay section out of the config and restored from it. That seems to have done the trick. Normally, ...
-
- Nothing in the upgrade that would have enabled it if it weren't already enabled. We'd need to see a copy of the pre-u...
-
- I can't explain it, either. I'm not sure if I could duplicate it (and I'm hesitant to restore the config remotely, u...
-
- In your config somehow you managed to get both of them enabled. The DHCP settings for the LAN show it enabled, and th...
-
- Scrubbed config attached.
Sidenote: wasn't particularly thrilled to see my password stored in plaintext all over t... -
- The scrubbed backup would definitely help. The only way I can see this happening is if there was an interface at one ...
-
- I've never manually edited the config. For all intents and purposes, this is a relatively clean and simple config --...
-
- short of disabling the input validation or manually editing the config, that should be impossible. Do you have specif...
-
- Fixed the web server redirect rule (needed [QSA,NE]) and they work again.
-
- OK it isn't a PHP/pfSense problems, it's the web server's http->https redirect dropping them. If I change the links t...
-
- Some help page links are dropping certain characters. Specifically, in help.php, the link should go here:
https://... - 06:47 AM Revision 7825f71e: use (self) rather than any as the destination for the lockout rules
- 06:46 AM Revision b762e3dc: use (self) rather than any as the destination for the lockout rules
-
- both have been changed
-
- Afraid I don't understand what's been committed. This bug is about HTTPS, you changed this for SSH? What's the point ...
-
02:00 AM Bug #3246: automatic lockout rule too general and cannot be unarmed
- Thanks, that resolves my main concern.
-
- changed destination to (self) rather than any. The rest of the complaints aren't true or aren't valid. It's logged in...
10/03/2013
-
- Hello,
from release of 2.1 we have huge problems with intel 10Gb cards. as you can see in following forum topic (h... -
-
-
- Under Services > DHCP Server, I get the following message:
> The DHCP Server can only be enabled on interfaces con...
10/02/2013
-
02:11 PM pfSense Packages Bug #3248 (Resolved): NUT package fails to write config to upsd.users
- The configuration driver for the NUT package is testing obsolete variable "allowaddr" in order to determine if it sho...
-
12:15 PM Revision 58ba4513: Merge pull request #815 from marcelloc/patch-1
- fix pkg_edit.php to show interface description instead of interface name
-
11:41 AM Revision f82cbe49: fix pkg_edit.php to show interface description instead of interface name
- 05:03 AM Revision 634054cc: Check for disabled OpenVPN instances in openvpn_resync_if_needed
- It is much cleaner if we check first for disabled OpenVPN instances, before diving into all the other checks. Note, t...
10/01/2013
-
- Is that a joke ? The lockout system is bugged (I explained how) and the antilockout cannot be used to reset that lock...
-
- WHat do you expect it to do, its protecting the system!
BTW, it has an antilockout by default as well.
09/30/2013
-
12:54 PM Bug #3247 (Resolved): ipsec mobile clients login banner cannot contain certain chars
- Hello,
Just a note to tell that when you use accent characters in Login Banner for mobile clients, you endup with ... - 10:23 AM Revision 80f88b3b: Patch applied manually. Fixes bug #3245 and old interface names
- 06:44 AM Revision adbfe851: Merge pull request #814 from phildd/master
- Traffic graphs widget has old interface names
- 05:49 AM Revision 1ed963d7: Traffic graphs widget has old interface names
- Fixes bug #3245
-
- This made me actually look at the display. Fix was simple: https://github.com/pfsense/pfsense/pull/814
09/29/2013
-
- Hello all,
There is a rule that generates lockout for HTTPS clients that fail too many attempts on the pfsense web... -
01:04 PM Bug #3245 (Resolved): Traffic graphs widget has old interface names
- I changed the interface names and i can see the updated names in Status ... Traffic Graph (2).
But if I use the Traf... - 12:42 PM Revision 78b2a705: Fix logic inn detecting if OpenVPN resync needed
- Commit https://github.com/pfsense/pfsense/commit/f33dcc5c79c54af7daf91a81cfdd7f489e8cb67c reversed the logic sequence...
-
- Lots of newbies just paste 10.0.8.0/24 as the tunnel network on their OpenVPN instances. This comes from an example s...
-
- Pull request: https://github.com/pfsense/pfsense/pull/813
I think the logic got messed up with a recent change. Look... -
06:11 AM Bug #3243 (Resolved): OpenVPN does not rebind when gateway fails over
- ...
-
- when u add a URL table link under alias, it works fine and when u go under aliases it shows the link also properly su...
09/28/2013
-
- that's a feature with legit usage cases. You need to log into the web interface for the initial config regardless, an...
-
11:32 AM Bug #3241 (Rejected): Automatic connect in Infrastructure mode
- In infrastructure mode, pfsense automatically connects to a open wifi network. Quote from the SSID field description ...
-
- Ermal will make changes here
-
- Applied in changeset commit:8ad84ebb49f86e791427110233382bd5e804d503.
-
-
- 01:16 PM Revision 8ad84ebb: Remove redundant copies of getNasIP(), it should fix #3234
- 01:15 PM Revision 0bb7bfbb: Merge pull request #812 from irconan/master
- Minor CoDel fixes, fix #3239 and #3240
-
-
-
08:41 AM Bug #754: hifn driver and AES192 and 256
- I've attached a couple of text files showing the Soekris VPN-1401 (Hifn-7955 / PCI Bus) version working in a Soekris ...
-
08:10 AM
Bug #3239 (Feedback): Link to codel wiki page malformed (missing :)
- Applied in changeset commit:0bb7bfbbd9f0881a6d1970540068c707f4feb69f.
-
- Link href actually reads http://http:// ...
Pull request for fix here: https://github.com/pfsense/pfsense/pull/812 -
- Link to codel wiki page in the web UI has href "http//www.bufferbloat.net/projects/codel/wiki"
The colon is missin... -
- wconfig function for non-priq queue types does not save codel config.
-
- Hrmm not seeing that David - line 852 is https://github.com/pfsense/pfsense-packages/blob/master/config/unbound/unbou...
-
- IPv6 host overrides do not work in unbound 1.4.20_8 due to a typo in line 852 of /usr/local/pkg/unbound.inc, which sh...
09/27/2013
-
-
- 01:25 PM Revision f58bfb93: Remove redundant copies of getNasIP(), it should fix #3234
- 11:58 AM Revision bab13e1f: Merge pull request #811 from Scavy/patch-1
- Patch to include GratisDNS as dynDNS service
- 10:37 AM Revision 58e1f8f2: Update to include GratisDNS dynDNS service
- 09:29 AM Revision 5458bc59: Update to include GratisDNS dynDNS service
-
- Applied in changeset commit:f58bfb932acf9924546d3b9a2c77899741adeb9a.
-
- That is intentional in case someone needed to retain the history.
One can always remove the file from /var/db/rrd/... -
- Hello,
Having played with multiple Gateway configurations, my Pfsense box still shows "WAN_DHCP" as Graphs drop do... -
- Works as expected!
09/26/2013
- 01:53 PM Revision 97c78e19: Merge pull request #810 from ExolonDX/branch_04
- Update "status_rrd_graph_settings.php" XHTML
- 01:53 PM Revision b9147430: Merge pull request #809 from ExolonDX/branch_02
- Update "status_rrd_graph.php" XHTML
- 01:52 PM Revision 61ba12f0: Merge pull request #808 from ExolonDX/branch_01
- Update "pkg_edit.php" XHTML
- 01:47 PM Revision 65fec80d: require service-utils.inc for find_service_by_openvpn_vpnid()
- 01:47 PM Revision 857ff425: Add missing td
- 01:47 PM Revision 1650e1ec: Remove use of undefined var $conn and fix some td class
- 01:45 PM Revision c92ccc70: require service-utils.inc for find_service_by_openvpn_vpnid()
- 01:40 PM Revision a5eb046f: Add missing td
-
- is_cert_revoked() in certs.inc is doing a bogus check on the certificate's descr field to see if the certificate is r...
- 01:32 PM Revision 7717ee0b: Remove use of undefined var $conn and fix some td class
-
- This is easy to resolve, but best if one of the devs does it, as you guys will know which common include file you pre...
-
- For instance, there is another copy of the same identical function on radius_accounting.inc
- 11:41 AM Revision 75f4bdbd: Update "status_rrd_graph_settings.php" XHTML
- Close INPUT tags
Update HTML Boolean operators
Update TABLE tag with summary statement - 11:35 AM Revision c2cc1721: Update "status_rrd_graph.php" XHTML
- Update SCRIPT statements with CDATA
Move the close HEAD statement
Move the FORM statement outside the main table
Clos... - 11:18 AM Revision 5655d48b: Update "pkg_edit.php" XHTML
- Update HTML Boolean operator
-
-
12:36 AM Bug #3231: ipv4 / DHCP leases tab
- I figured out the issue. The ddwrt i set up as a switch had dhcp forwarder with the ip of the pfsense server. I dis...
-
- duplicate
09/25/2013
- 10:45 PM Revision 9c43a910: Merge pull request #806 from ccesario/master
- Set network interfaces description as interface name.
-
- Static routes on the WAN interface do not function if System->Advanced->Firewall&NAT->Disable_Reply-To remains unchec...
-
- Reported in forum: http://forum.pfsense.org/index.php/topic,66764.0.html
System logs: php: /diag_nanobsd.php: Could ... -
- Reported in forum http://forum.pfsense.org/index.php/topic,66764.0.html:
Fatal error: Cannot redeclare getNasIP() (p... -
08:16 PM Revision 2d9063af: Set network interfaces description as interface name.
-
06:54 PM Bug #3226: Captive Portal Radius Error
- It appears that it had been reset - instead of MSCHAPV1 it was listed as PAP. Saving it back to MSCHAPV1 and the erro...
-
- Seems that parameter radius protocol is empty. Could you please confirm it?
-
-
-
- It would be easy enough to add status icons for good/bad to Services->Dynamic DNS, and to the Dynamic DNS dashboard w...
-
11:40 AM pfSense Packages Bug #3203: vnstat2 not working after pfsense 2.1 upgrade
- Hi, I was able to fix this using this guide if anyone runs into the same issue.
http://forum.pfsense.org/index.php... -
09:35 AM pfSense Packages Bug #3109: pfBlocker disables firewall on nanobsd when no there is no internet access at boot time
- I couldn't reproduce this on nanobsd 2.1-RELEASE either.
-
08:44 AM Bug #3233 (Closed): DHCP options slow to save with large lease files
- When I change anything in dhcp server options and click save it last more than 10 minutes.
It happens with 2000 le... -
- I am also on 2.1-RELEASE and Status->DHCP Leases shows leases from the pool at the top (including leases for all of t...
- 12:28 AM Revision 93ee6032: Respect default gateway option when adding a gateway from interfaces page. It fixes #3230
- 12:27 AM Revision 197099cf: Respect default gateway option when adding a gateway from interfaces page. It fixes #3230
09/24/2013
-
- Applied in changeset commit:93ee603200376dad82f9b531a8086049211273e4.
-
- Applied in changeset commit:197099cffd8cef6667ffd7fecee94c7e0a5e3955.
-
05:59 PM Bug #3230 (Resolved): Creating Gateway in Interface page forces default gateway to be set even if unchecked.
- When you create a gateway from the Interfaces tab, the interface gets the default gateway bit set, even if you
unche... -
- I can check the dhcp logs and see the addresses that were handed out, if i check on the dhcp leases tab i am able to ...
-
-
-
-
-
-
12:39 PM Feature #3229 (Resolved): make DynDNS status accessible to the colorblind
- DynDNS status uses red/green to indicate its status. Especially in a lightweight typeface, this is inaccessible to ...
-
01:53 AM Feature #3228 (Rejected): Please add an "Interface Down" Trigger Level for Gateway Group members
- For gateways which are tied to interfaces (which are in all the cases I use Interface Groups) it would be nice to hav...
-
- ...
-
- The RRD graph. Most the time when apinger thought this link was down it was actually working fine.
-
- This issue affects a 2.0.1 installation and might be fixed in 2.1. There is eg. bug 3138 but that one was affecting ...
09/23/2013
-
-
-
- Freshly auto-upgraded from 2.0.3 and on my first attempt to login to the captive portal, I received the following err...
-
02:52 PM Feature #2358: NAT64 support
- UPVOTE. It would be really nice to have these capabilities built into pfSense. The Viagenie implementation is nice an...
-
-
-
-
-
11:35 AM Revision 9e768daf: Prevent assigned vlans from being changed the tag.
-
- Applied in changeset commit:428ea19f8abcb4f261e7136e2664494af834239d.
-
- Applied in changeset commit:9e3784217b322f0e292bbec28ed87abf7d00677e.
-
- The RRD data file for CP concurrent users has only NaN values. It appears the script to gather the stats isn't inject...
09/22/2013
-
- I just spent some significant time looking for the VMware/OVA images for version 2.1 on the mirrors as they are still...
-
- Not verified (and I'm not going to break this firewall *again* just to check it), but I also believe that at some poi...
-
03:00 PM Bug #3223: pfr_unroute_kentry: delete failed and freeze
- sorry Affected Architecture: i386
-
- I just tested the update in pre-production for 2.1_release
The configuration is CARP and BGP with 2 machines.
Unf... -
06:33 AM Bug #3222 (Resolved): Firewall URL table aliases "Update Freq." has no units
- In firewall_aliases_edit.php on line 503, find:
$update_freq_str = gettext("Update Freq.");
and change it to:
...
09/21/2013
- 06:17 PM Revision ac8e8506: Fix #3218, reaload filter rules when activate or deactivate dhcpdv6
- 06:16 PM Revision 472ad9a0: Fix #3218, reaload filter rules when activate or deactivate dhcpdv6
-
- Applied in changeset commit:ac8e8506b90c64b99c80bdff50892b703431b54a.
-
- Applied in changeset commit:472ad9a0e58f0e544f2de65d540de27e9da049dc.
-
-
- not a general problem, specific to certain pieces of hardware we don't support.
09/20/2013
-
08:39 PM pfSense Packages Bug #3221 (Resolved): dansguardian 2.12.0.3 pkg v.0.1.8 has carriage returns in dansguardian.sh
- /usr/local/etc/rc.d/dansguardian.sh is has lines terminated with CRLF, which prevents the script from running. Ther...
-
01:17 PM Bug #3220 (Rejected): Embedded version (i386-2g/4g) does not start the Console Menu
- Related Forum Post: http://forum.pfsense.org/index.php?topic=34814.0
I just acquired a ServGate SG230 (P3-1.0Ghz a... -
- Please provide your system log when the issue happens!
The only scenario that i can think of is when both pppoe link... -
03:16 AM Bug #742: apinger doesn't recover opt wan when connection returns.
- Same issue here with 2.1 RELEASE : with my two PPPoe WANs, when they goes offline and then came back, I have to reboo...
-
03:20 AM Bug #3219 (Resolved): Forwarded domain with underscore should be allowed to add
- Something I completely missed with 2.1 but realized the UI doesn't allow yet, it also affect previous 2.0 releases (v...
09/19/2013
-
-
- 01:45 PM Revision baeb0599: Alix 2D6 crashes upgrade process withou out of diskspace
- Updating the the RRD graphs causes two copies of each RRD's XML file to be stored in /tmp.
On Nanobsd, the default /... -
06:17 AM Bug #3218 (Resolved): Activating DHCP6 server does not reload firewall rules
- When the DHCP6 server is enabled there is no filter reload triggered that creates rules so the server can be reached....
09/18/2013
-
08:20 PM Revision fd750cd0: Certificate Manager, for 'Create an internal Certificate' use the correct 'Digest Algorithm'
-
- This is fixed on 2.2 already, and is fixed on RELENG_2_1 now by commit:fd750cd
-
01:35 PM Bug #3215: pfsense 2.1-RELEASE can't import OpenVPN settings from previous version.
- Oh, I see. Sorry.
-
- Sections of a configuration cannot be restored across different versions, it's always been that way but it may have w...
-
- When attempting to import OpenVPN-settings from the previous release-version of psense, it just tells me that
that i... -
- Please post in the forum for configuration help, not the ticket system.
-
12:30 PM Bug #3217 (Rejected): IPSec and Firewall
- Firewall IPSec Rule :
IPv4 * 10.13.250.97 * 172.16.3.40 * * none Easy Rule: Passed from Firewall Log Vie... - 10:14 AM Revision c13a7052: Merge pull request #795 from razzfazz/ia-pd-hint
- add option to send prefix hint for requesting desired prefix length for delegation (for master branch)
-
08:23 AM Bug #3216 (Resolved): PFSense 2.1 - Captive Portal Zone - is not avaible in user effective privileges
- PFsense 2.1. If you configure an user only to access to captive portal, it doesn´t work, I supose why: in user manage...
-
- And on another note, the referenced commit got reverted here: https://github.com/pfsense/pfsense/commit/a3d6166bb20a3...
-
- Chris,
I upgraded 6 firewalls to 2.1-RELEASE and it is indeed broken on all 6 of them.
The foreach loop on line... -
- DHCP failover is definitely working in general in 2.1 release. We have it running in 5 networks, and have tested it o...
-
- 0.0.0.0/8
8000::1
There are many threads on the forum about these breaking DHCP/DHCPv6. Latest example: http://fo... -
03:04 AM Bug #3213 (Resolved): Error creating more than 30 limiters
- When trying to create a 31st limiter I get an error message:
"The following input errors were detected: At least one... -
02:18 AM Bug #3212 (Resolved): PHP Warning: Division by zero in /etc/inc/captiveportal.inc on line 729
- 2.1-RELEASE (i386)
built on Wed Sep 11 18:16:50 EDT 2013
/tmp/PHP_errors.log
[18-Sep-2013 11:08:54 Europe/Mosc...
09/17/2013
-
- Both nodes are getting setup as Primary.
While 2.1 was in RC a similar problem where both nodes were getting setu... -
- I am seeing this too. My workaround has been to fix the assignment from the Interfaces: Assign network ports: Interfa...
-
- Sadly, I've just confirmed this... and also confirmed that IT DOESN'T HAPPEN EVERY SINGLE TIME! WTF?!?
I changed OP... -
- Changing the VLAN tag on my [renamed] OPT interface from "3" to "202" (to accommodate a change my upstream made) actu...
-
10:05 PM Bug #3210 (Rejected): Upgrade to 2.1 fails: Something went wrong when trying to update the fstab entry
- Same as this: https://redmine.pfsense.org/issues/457
Attempting to upgrade from 2.0.1 RELEASE to 2.1 RELEASE. Als... -
-
-
-
-
- Renaming an interface to, in my case, RD_LOM_DISTRIBUTION caused this error:
Sep 17 18:43:39 f1 php: rc.bootup: Ne... -
- Applied in changeset commit:336e899a3917bb4e68813c3852436cbda12128ff.
-
- Applied in changeset commit:c4eeb1c472b978a3669a2564f9a1e3733965be99.
-
- Applied in changeset commit:819a603c2deb2c842d0132459731d1ba79498d4c.
-
- Applied in changeset commit:78db4f1a622d97df6420ee53f2b8224ab2e3a794.
-
- Hi,
I have done a new install and it looks like it's broken there as well.
When I click vnstat info and hit save...
Also available in: Atom