Activity

30 days up to

From 06/13/2010 to 07/12/2010

11:58 PM Revision d030c9de: Properly select the interfaces when displaying the edit page for floating rules that have multiple selected interfaces. Fixes #726: Erik Fonnesbeck
08:05 PM Bug #726 (Feedback): Interface selection under floating tab rules bug: Applied in changeset commit:"d030c9ded4e5541de5be8e73d2bd4f5942380b45". Erik Fonnesbeck
04:55 AM Bug #726 (Resolved): Interface selection under floating tab rules bug: if we create a rule under the floating tab and the interface if we select multiple of them, eg: LAN and OPT1 and then... Bipin Chandra
06:35 PM Revision 4d6559c3: use product_name: Chris Buechler
04:29 PM Bug #730 (Rejected): DHCP server not accepting valid ranges: auto update didn't work on the version you're on, and that issue, plus the invalid range, has long since been fixed. ... Chris Buechler
04:26 PM Bug #730: DHCP server not accepting valid ranges: Also, if the date doesn't change, the update didn't take. You might need to to a manual firmware update or a console ... Jim Pingle
04:25 PM Bug #730: DHCP server not accepting valid ranges: Are you on i386 or amd64 snapshots? Jim Pingle
04:24 PM Bug #730 (Rejected): DHCP server not accepting valid ranges: I created /26 subnets all within the same class C on four separate interfaces like so:
OPT1 - 10.0.0.0/26
OPT2 - ... Sam Stelfox
03:04 PM Revision f85d812b: Remove stray </a>. Obtained-from: m0n0wall: Scott Ullrich
01:50 PM Revision 2003b5d8: Print a warning on the login screen if you are accessing the router by a non-local IP address (one not configured on the system) to warn about potential MITM attacks.: Jim Pingle
01:19 PM Revision f17f9f28: Bypass the DNS Rebind attack checks if accessing by IP address.: Jim Pingle
09:22 AM Bug #729: if_bridge unpredictable filter interface selection: I currently don't have access to the test box, but I will later on this evening, and once I do, I will post the outpu... Jonathan Tripathy
09:13 AM Bug #729 (Closed): if_bridge unpredictable filter interface selection: This bug is regarding traffic leaking when using bridges interfaces. I have been able to produce this bug on 2 sepera... Jonathan Tripathy
09:07 AM Bug #728: default gateway cannot be unset: tom hensel wrote:
> yes, i'm using DHCP on one of the WAN interfaces (vr1). so the DHCP client is overwriting the de... Jim Pingle
09:04 AM Bug #728: default gateway cannot be unset: > # netstat -rn
Destination Gateway Flags Refs Use Netif Expire
default 192... tom hensel
08:51 AM Bug #728: default gateway cannot be unset: Changed the title of the ticket to reflect that this does not really have anything to do with gateway groups. Jim Pingle
08:51 AM Bug #728: default gateway cannot be unset: Then show the output of:
# netstat -rn
And a copy of your configuration in the state where it doesn't work afte... Jim Pingle
08:47 AM Bug #728: default gateway cannot be unset: Jim P wrote:
> You always need a default gateway, you can't just uncheck it. You must use gateway groups via rules, ... tom hensel
08:43 AM Bug #728: default gateway cannot be unset: You always need a default gateway, you can't just uncheck it. You must use gateway groups via rules, and they must ma... Jim Pingle
08:41 AM Bug #728: default gateway cannot be unset: Jim P wrote:
> The default gateway is not associated with gateway groups in that way.
could you please elaborate?... tom hensel
08:37 AM Bug #728 (Rejected): default gateway cannot be unset: Jim Pingle
08:36 AM Bug #728 (Resolved): default gateway cannot be unset: The default gateway is not associated with gateway groups in that way. Jim Pingle
08:34 AM Bug #728 (Rejected): default gateway cannot be unset: 1) define a gateway group of at least two gateways
2) unset "Default Gateway" checkbox from the according gateway
3... tom hensel
08:47 AM Bug #727: defining a Gateway Group does not balance any traffic: When submitting a configuration, we need the configuration as it is when it doesn't work. You didn't mention that you... Jim Pingle
08:44 AM Bug #727: defining a Gateway Group does not balance any traffic: Jim P wrote:
> Yes, and I also read your configuration, and saw that you were not using the gateway group at all in ... tom hensel
08:41 AM Bug #727: defining a Gateway Group does not balance any traffic: Yes, and I also read your configuration, and saw that you were not using the gateway group at all in rules.
Make a... Jim Pingle
08:39 AM Bug #727: defining a Gateway Group does not balance any traffic: Jim P wrote:
> This is a configuration issue, not a bug. Please use a support system to ask for additional help (lik... tom hensel
08:34 AM Bug #727 (Rejected): defining a Gateway Group does not balance any traffic: This is a configuration issue, not a bug. Please use a support system to ask for additional help (like the forum or I... Jim Pingle
08:29 AM Bug #727 (Rejected): defining a Gateway Group does not balance any traffic: the only traffic that gets over the second WAN interface is DNS traffic as defined in "General Setup".
in addition, ... tom hensel
05:00 AM Bug #667: dial on demand broken again: it might be but there have been a few rare cases in which i got disconnected from the isp which usually doesn't happe... Bipin Chandra
04:55 AM Revision 5465972a: Checked gettext() implementation on interfaces_assign.php: Carlos Eduardo Ramos
02:33 AM Revision 1a48c027: Implemment gettext() calls: Jeann
02:15 AM Revision 136c598d: Checked gettext() implementation on interfaces.php: Carlos Eduardo Ramos
12:21 AM Bug #725: DHCP Relay missing logic for dynamic routes: The problem is it's missing checks for static routes, so it picks the wrong interface. This issue exists in m0n0wall ... Chris Buechler

08:58 PM Bug #713: Shaper Wizard: When backlogged, high priority queues get zero bandwidth: There is no error message output.
The shaper config functions, but logically is not correct. During congestion,... Aaron Berland
10:10 AM Bug #713: Shaper Wizard: When backlogged, high priority queues get zero bandwidth: Can you please be more detailed on what the error is? Ermal Luçi
05:08 PM Bug #541: Missing binaries on 64 bit: I fixed some builder pfPorts issues that would lead to voucher, dnswatch, gzsig, ssh_tunnel_shell, and sshlockout_pf ... Jim Pingle
04:28 PM Revision 6775c54e: Fixes #698. Always check if we are dealing with an ip value to then store the subnet in the config.: Ermal LUÇI
03:31 PM Bug #698: nested network aliases problem: Note that your existing non-working configuration still won't work. The change makes it so the nested alias will nev... Erik Fonnesbeck
10:35 AM Bug #698 (Feedback): nested network aliases problem: Applied in changeset commit:"6775c54e2aa571d76d2fc6dea58f5c5a677997f4". Ermal Luçi
01:33 PM Revision 42f634a0: Merge remote branch 'mainline/master': Vinicius Coque
10:57 AM Bug #667: dial on demand broken again: what im trying to tell u is in older snaps dial on demand as well as disconnect used to work together as well as in 1... Bipin Chandra
10:24 AM Bug #667: dial on demand broken again: I actually will revert that changeset if you do not make up your mind.
Seems i have misread the bug before and if yo... Ermal Luçi
10:22 AM Bug #723 (Resolved): Load Balancer problems: how to reproduce:
-create pool
-create virtual server
Check /var/etc/relayd.conf it will only contain the table,... Tommie Van Mechgelen
09:24 AM Bug #721 (Resolved): captive portal error: I installed pfsense 2.0-BETA3 built on Sun Jul 4 07:31:59 EDT 2010.
I configured it in my virtual machine to test my... Cristian Astorino
07:44 AM pfSense Packages Bug #719: Squid doesn't use local DNS cache (and fails after WAN failover): Stupid me just discovered the already present option "Use alternate DNS-servers for the proxy-server".
I still thi... Malte Stretz
05:16 AM pfSense Packages Bug #719 (Resolved): Squid doesn't use local DNS cache (and fails after WAN failover): We use Squid as a transparent proxy and have two PPPoE uplinks via two different ISPs. Those should failover automat... Malte Stretz
02:05 AM Bug #712: Error when adding user.: But the empty group all the same appears, and the user is not added in one group. :) Mike Stupalov
02:03 AM Bug #712: Error when adding user.: I have found, where an error:
auth.inc have this line (289)... Mike Stupalov
01:34 AM Bug #712: Error when adding user.: Also at removal of the user, it is not deleted from group 'all'. Mike Stupalov
01:30 AM Bug #712: Error when adding user.: Today I have refreshed to last snapshot, but it has not helped.
It seems to me that at creation of the user, the g... Mike Stupalov

05:23 PM Bug #374: "Register DHCP leases in DNS forwarder" doesn't work: After having left pfsense running for a while my dynamic hostname resolution seems to have vanished.
uptime
11:58... Adam Stylinski
02:16 PM pfSense Packages Bug #692: snort pidfile issue: Confirmed as well using 2.8.6 pkg v. 1.27 on pfSense 2.0 beta tech dork
12:56 PM Bug #718 (Closed): Error when saving Captive Portal Settings: Chris Buechler
12:03 AM Bug #79: DNSMasq removed ISC-DHCP Log parsing. Need to write a replacement: After having left pfsense running for a while my dynamic hostname resolution seems to have vanished.
# uptime
1... Adam Stylinski

08:42 PM Bug #718: Error when saving Captive Portal Settings: after a few times the problem suddenly disappeared.. Anonymous
04:00 PM Bug #718 (Closed): Error when saving Captive Portal Settings: 2.0-BETA3 built on Sat Jul 3 01:11:56 EDT 2010
FreeBSD 8.1-RC1
Jul 3 21:48:52 php[18560]: /services_captiveport... Anonymous
02:51 PM Bug #708: Need more checks for dns rebind issue: Hello,
I'm new here, but I wanted you to know this DNS rebind check had to be commented out in order to get the c... Anonymous
02:41 PM Bug #541 (New): Missing binaries on 64 bit: Still missing post-install:
/usr/local/bin/
voucher
wol
/usr/local/sbin/
dnswatch
gzsig
ssh_tunnel_shel... Jim Pingle
02:27 PM Bug #717 (Resolved): No default gateway on LiveCD: After booting the LiveCD for the first time, there is no default gateway.
If you install to HDD, and make no other... Jim Pingle

08:34 PM Bug #706 (Closed): OpenVPN client export needs to include remote-cert-tls server: OpenVPN client export needs to include the following line in all client configurations.
remote-cert-tls server Chris Buechler
07:59 PM Revision 9e3aadbe: Add checkboxes to disable TSO and LRO since some drivers will misbehave with them set. Resolves #703: Jim Pingle
05:55 PM Bug #705 (Resolved): setup_microcode() / enable_hardware_offloading() logic issue: setup_microcode() loops through interfaces by name (WAN, LAN, etc) and calls enable_hardware_offloading() on each ent... Jim Pingle
04:00 PM Todo #703 (Feedback): Checkboxes to disable TSO and LRO: Applied in changeset commit:"9e3aadbe90cb6708fa86471fef45be5965bea602". Jim Pingle
11:45 AM Todo #703 (Resolved): Checkboxes to disable TSO and LRO: There are still some drivers on 8 that do not work well with TSO and/or LRO enabled on the cards. We need to have che... Jim Pingle
03:39 PM Revision eaed8f3d: Merge remote branch 'mainline/master': Vinicius Coque
11:51 AM Todo #704 (Resolved): Load cpufreq.ko when powerd is enabled: Looks like we need to load cpufreq.ko when powerd is enabled, and some systems also need to change their timecounter ... Jim Pingle
04:51 AM Bug #636: layer7 not work correctly: At the big load on the channel, additional reports in a system log began to appear:... Mike Stupalov
01:49 AM pfSense Packages Bug #524: nvnstat not saving records on embedded: till date doesnt work, current situation is, works right after install but if u reboot, the service isnt run again so... Bipin Chandra
01:28 AM Feature #702 (Resolved): Page with status for "Traffic Shaper: Limiter": Now the state "Limiter" can be learn only in the console, command @ipfw pipe show@.
It is necessary to make page o... Mike Stupalov

11:51 PM Revision 6cac9bda: Implement gettext() calls: Carlos Eduardo Ramos
10:30 PM Revision cf7ac033: Provide some error messages when posting from a script so consumers can have a clue at what happened.: Ermal LUÇI
10:28 PM Revision 11d2c529: Implement gettext() calls: Rafael Lucas
10:07 PM Bug #610: max-mss -39: Just a quick "thanks". Nice work guys. Brett Burley
09:32 PM Bug #610 (Resolved): max-mss -39: ahh, so the real issue is improper input validation on the setup wizard. Confirmed if you stick 1 in the config manua... Chris Buechler
09:22 PM Bug #610: max-mss -39: It was a side effect of "1" showing up in some Wizard boxes. It was trying to set the MTU to 1, and the max-mss to MT... Jim Pingle
09:19 PM Bug #610: max-mss -39: Not sure how to replicate this. The fix looks fine. Brett - can you confirm the fix? Chris Buechler
09:39 PM Bug #655 (New): Disabling IPsec does not flush SPDs: no change Chris Buechler
09:37 PM Bug #653 (Resolved): Sorting on Status > DHCP leases doesn't work: Chris Buechler
09:31 PM Bug #464 (New): Problems with setup wizard: Valid MTU is still not verified. Didn't check other fields. Chris Buechler
09:26 PM Bug #516: Auto update doesn't work on embedded: Yeah this is closed and won't be reopened. Either open a feature request (which will be for post-2.0) or submit teste... Chris Buechler
09:23 PM Bug #516: Auto update doesn't work on embedded: If you want to open a separate ticket for that, that would be better. This ticket was about the update not functionin... Jim Pingle
09:00 PM Bug #516: Auto update doesn't work on embedded: it works very very fine thanks a lot, but ... a little Detail
if you start the upgrade process and the file is dow... Jochen Becker
09:35 AM Bug #516 (Resolved): Auto update doesn't work on embedded: There have been many positive success reports between here, the forum, and IRC. It seems to be working well now. Jim Pingle
09:17 PM Bug #281 (Resolved): Traffic initiated by PPTP clients not passed: fixed Chris Buechler
08:21 PM Revision 38f90dc8: Implement gettext() calls: Rafael Lucas
07:39 PM pfSense Packages Bug #688 (Resolved): Delay pools are not compiled in Squid: Jim Pingle
07:31 PM pfSense Packages Bug #688: Delay pools are not compiled in Squid: delay pools works now thank you. Basel G.
04:05 PM pfSense Packages Bug #688: Delay pools are not compiled in Squid: This should be OK now. Update the package and try again. I updated squid to 2.7.9 and compiled in delay pools. Jim Pingle
04:05 PM pfSense Packages Bug #688 (Feedback): Delay pools are not compiled in Squid: Applied in changeset commit:"2b2c083f922067d75352c625e0590042fa2ce8bf". Jim Pingle
05:03 PM Revision d975e2e4: Implement gettext() calls: Carlos Eduardo Ramos
04:54 PM Revision 1c7c8dde: Implement gettext() calls: Carlos Eduardo Ramos
04:24 PM Revision ecacce60: Implement gettext() calls: Carlos Eduardo Ramos
04:04 PM Revision 3911f5e8: Implement gettext() calls: Carlos Eduardo Ramos
03:25 PM Revision 24148939: Implement gettext() calls: Carlos Eduardo Ramos
03:10 PM Revision fa227734: Implement gettext() calls: Rafael Lucas
02:02 PM Revision 5d8a530e: Implement gettext() calls: Rafael Lucas
02:02 PM Revision 69237206: Merge branch 'master' of git@rcs.pfsense.org:pfsense/pfsense-gettext: Rafael Lucas
10:38 AM Bug #685 (Feedback): PHP Dumping Core Repeatedly after Package Issues: This may be a sign of another problem, but the Avahi package was downloading its .tgz file to /tmp/ and extracting fr... Jim Pingle
10:21 AM Bug #694 (Resolved): Change interface with virtual IPs: If on the interface (e.g. WAN/em1) are customised virtual IPs.
We change the interface on page 'Interfaces: Assign... Mike Stupalov
06:38 AM Bug #693 (Resolved): Status gateway not correct.: ... Mike Stupalov
02:39 AM Revision a11ee3cf: Modified sintaxes on diag_dns.php and diag_dump_states.php: Jeann
02:33 AM Revision 5463dd9f: gettext on archives firewall_aliases.php e firewall_nat.php: me

08:03 PM Revision dbe8c192: Be more strict when doing checks for empty values.: Ermal LUÇI
06:48 PM Feature #687: Test Button for Growl Notifications: You can file a test notice by going to Diag>Command, in PHP box put in:
file_notice("test","test");
Chris Buechler
06:30 PM Feature #687 (Resolved): Test Button for Growl Notifications: Growl sometimes gets a bit weird with needing to be sure the password is right and all, so it'd be nice to have a tes... Steve Vigneau
06:47 PM pfSense Packages Bug #688 (Resolved): Delay pools are not compiled in Squid: Output in the latest Squid package under 1.2.3 shows:
@# squid -v
Squid Cache: Version 2.7.STABLE7
configure opt... Basel G.
05:12 PM Bug #686 (Closed): Traffic shaper on single interface?: Silly question, but revision http://redmine.pfsense.org/projects/pfsense/repository/revisions/38b357bdb50b820d63646d4... Warren Baker
04:03 PM Revision 6bd0fc10: Actually apinger can be reloaded and this is not doing its job apparently.: Ermal LUÇI
02:29 PM Revision e879fc81: Fixes #613. Add correctly users to all users group.: Ermal LUÇI
10:16 AM Bug #685 (Resolved): PHP Dumping Core Repeatedly after Package Issues: Using pfSense 2.0 BETA3 embedded nightly from sometime around 18-Jun-2010 I installed the Avahi and OpenVPN export pa... Steve Vigneau
08:35 AM Bug #613 (Feedback): New users are not added/counted in All Users group: Applied in changeset commit:"e879fc815effb1477ba13f2dfc2aed4b8f2d40be". Ermal Luçi
06:53 AM Revision b009b153: Add build-time comparison also.: Jim Pingle
06:38 AM Revision 4c4b068c: Fix ssh key existence test.: Jim Pingle
06:04 AM Bug #684: interface status, disconenct button doesnt work: one step i do to get over this is as follow:
on clickign disconnect nothing happens even after a few mins so i go ... Bipin Chandra
05:59 AM Bug #684: interface status, disconenct button doesnt work: dial on demand is checked but in older snaps, on clicking disconnect, pppoe used to disconnect and due to dial on dem... Bipin Chandra
05:44 AM Bug #684: interface status, disconenct button doesnt work: Have you checked dial-on-demand?
Any entries in the system log?
Please can you provide the output of commands:
i... Ermal Luçi
04:22 AM Bug #684 (Resolved): interface status, disconenct button doesnt work: disconnect button under status > interfaces doesnt work for pppoe connections, on clicking it, the pppoe conenction i... Bipin Chandra

03:45 PM Bug #674 (Resolved): Missing delete buttons on individual NAT rules: Chris Buechler
02:50 PM Bug #674: Missing delete buttons on individual NAT rules: I just installed latest build. Buttons are there, and they work:) Lars Hupfeldt Nielsen
05:45 AM Bug #666: No one gateway: Ermal Luçi wrote:
> Can you test latest snapshots?
Yes, now the status is displayed everywhere.
But there was ... Mike Stupalov

07:08 PM Bug #88: TXCSUM forced on at boot which breaks wireless bridging: 2.0-BETA3
built on Thu Jun 17 13:50:57 EDT 2010
FreeBSD pfsense2.hupfeldt 8.1-RC1 FreeBSD 8.1-RC1 #0: Thu Jun 17 ... Lars Hupfeldt Nielsen
07:08 PM Bug #88: TXCSUM forced on at boot which breaks wireless bridging: I have the same problem. running on ALIX with atheros based card. ifconfig vr0 -txcsum solves problem. Lars Hupfeldt Nielsen
05:59 PM Bug #680 (Rejected): Transparent/Unreadable menus in google-chrome.: That has to be a Chrome on Linux bug, I've spent more time working with 2.0 in Chrome this year than a heavy user wil... Chris Buechler
04:47 PM Bug #680: Transparent/Unreadable menus in google-chrome.: In my opinion is a mistake your browser chrome (besides the old version).
I also use chrome, and had ever seen. Mike Stupalov
01:55 PM Bug #680: Transparent/Unreadable menus in google-chrome.: Google Chrome Beta, 5.0.375.70, Ubuntu Linux
----
pfSense:
2.0-BETA3
built on Thu Jun 17 13:50:57 EDT 2010
Fre... Lars Hupfeldt Nielsen
12:15 PM Bug #680 (Feedback): Transparent/Unreadable menus in google-chrome.: On what platform, and how can you replicate it? I work 90% in Chrome (mostly on Windows), and never seen that. Chris Buechler
10:02 AM Bug #680 (Rejected): Transparent/Unreadable menus in google-chrome.: Menus suddenly become transparent/unreadable. Sorry, don't know what provokes it, but its has happened several times.... Lars Hupfeldt Nielsen
02:10 PM Revision d4b17d7c: We should still delete this file if it's found, or the GUI can go into an infinite loop reinstalling packages. Fixes #678: Jim Pingle
01:59 PM Bug #673: SSHD keys not created on restore: What I meant about create on enabling is that it should happen every time ssh is enabled, if the keys are missing. Ri... Lars Hupfeldt Nielsen
12:43 PM Bug #673: SSHD keys not created on restore: I suspect the SSH upgrade code is not working correctly. At some point the SSH config item was moved. Scott Ullrich
10:20 AM Bug #673: SSHD keys not created on restore: Lars Hupfeldt Nielsen wrote:
> It would also be a good idea to create the keys if missing when ssh is enabled.
Fi... Jim Pingle
01:49 PM pfSense Packages Bug #679: HAVP error message shows up behind top menu.: Yes, I'm using NanoBSD, on Alix boards. There are no fields for build/platform details right?
-----------
2.0-BET... Lars Hupfeldt Nielsen
10:15 AM pfSense Packages Bug #679: HAVP error message shows up behind top menu.: I presume this is on NanoBSD? On all your tickets you should really specify if you are using NanoBSD since it can beh... Jim Pingle
08:55 AM pfSense Packages Bug #679 (Closed): HAVP error message shows up behind top menu.: See attached image. Lars Hupfeldt Nielsen
10:15 AM Bug #678 (Feedback): cant go to dashboard due to package reinstall screen everytime: Applied in changeset commit:"d4b17d7ce7bb02806e28ba1c79d5679d5c3a43d4". Anonymous
10:12 AM Bug #678: cant go to dashboard due to package reinstall screen everytime: I committed a fix for this and restarted the snapshot builder run that was active, so the next set of snapshots shoul... Jim Pingle
05:11 AM Bug #678 (Resolved): cant go to dashboard due to package reinstall screen everytime: im on the 19th June nanobsd snap and there was a recent patch by Emal regarding package sync etc on bootup but i gues... Bipin Chandra

01:55 PM Revision 8af6c46d: Remove extra code that isn't needed any more in interfaces.inc.: creating pppoe reset file is now handled directly in interfaces_ppps_configure function. Marcus Brown
01:35 PM Revision 69c1b043: Fix empty data shown in interfaces_ppps when dislaying modem interfaces.: Also, clean up interfaces_ppps_configure. For PPtP/L2tP if Local IP field is
left empty, try to get the IP from the p... Marcus Brown
09:46 AM Bug #583: pppoe period reset doesnt work: This needs to be carefully tested again since the recent changes to the PPPoE configuration code reworked it a bit. Marcus Brown
09:43 AM Feature #446: Enable ether interface to be reused (when used for PPPOE), like wireless clone: This feature now exists. Builds after June 10th have the ability for accomodate multiple PPtP/PPPoE WAN connections o... Marcus Brown
12:07 AM Revision 22a11a58: Fix some errors in spelling, punctuation, grammar, etc.: Larry Gilbert

Also available in: Atom

pfSense

Activity

Project

General

Profile

pfSense

Activity

Activity

07/12/2010

07/11/2010

07/10/2010

07/09/2010

07/08/2010

07/07/2010

07/06/2010

07/05/2010

07/04/2010

07/03/2010

07/02/2010

07/01/2010

06/30/2010

06/29/2010

06/28/2010

06/27/2010

06/26/2010

06/25/2010

06/24/2010

06/23/2010

06/22/2010

06/21/2010

06/20/2010

06/19/2010

06/18/2010

06/17/2010

06/16/2010

06/15/2010

06/14/2010

06/13/2010