Activity
From 08/08/2010 to 09/06/2010
09/06/2010
-
04:13 PM Revision 298e5e0a: Ticket #876. Remove old status file of apinger before restarting because it might confuse gui.
-
03:04 PM Revision cfdf9444: Delete previous route if present.
-
01:35 PM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- Ermal...nothing have changed.
After restart there is no reference of pppoe gateway in system logs, like it does not ... -
01:13 PM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- I will check this new change on /etc/inc/gwlb.inc and report back
-
01:08 PM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- yes...it changes
-
09:05 AM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- Does your pppoe address change during renewal or it stays the same?
-
07:18 AM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- Just to mention again: this is not hardware problem or link problem. I have 3 firewalls with different hardware, diff...
-
07:05 AM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
This is system output while it is not routinh trough pppoe
# uname -an
FreeBSD 8.1-RELEASE FreeBSD 8.1-RELEASE ...-
06:13 AM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- Can you give more details about your configuration.
As verbose as possible will be better.
For example.
All config... -
01:15 PM Revision 401a6674: Actually there is a script that will run ntpd on bootup. Revert partially the change to fix ntp.
-
01:11 PM pfSense Packages Feature #880 (Closed): Default route on wan failover
- In *dual wan* setup it would be useful to have *default route* (using first WAN gateway) changed to second WAN gatewa...
-
01:10 PM Revision 45611d02: Ticket #877. Some cleanup and fixes so that openvpn status works correctly.
-
01:04 PM Revision c8960970: Fix ntpd starting at boot time and also status->services checking/stop/start/restart display. Previously ntpd would not start at all either though it should.
-
12:02 PM Bug #879 (Resolved): Correct parsing of output by rate
- The formating of /usr/local/bin/rate output (called in bandwidth_by_ip.php) sometimes mess up the parser.
For instan... -
09:43 AM Bug #878: Drag and Drop firewall rules causes corruption
- Forgot to add that i tested with:
Chrome for Mac v5.0.375.127
Chrome for Windows7 v5.0.375.127 and IE8 v8.0.7600.... -
09:19 AM Bug #878 (Closed): Drag and Drop firewall rules causes corruption
- As per forum issue http://forum.pfsense.org/index.php/topic,28037.0.html - re-ordering of the firewalls using drag-an...
-
03:55 AM Bug #877: Status service OpenVPN
- here a screen shot
-
03:24 AM Bug #877 (Feedback): Status service OpenVPN
- It's not listed in services (there isn't a service entry, and doesn't really need one). Please add a screenshot of wh...
-
03:07 AM Bug #877 (Resolved): Status service OpenVPN
- In services in Status tab, the openVpn service is marqued as stopped
even though the service is running? -
03:52 AM Bug #875: Uninstalling packages can remove system libraries
- I think just installing all necessary package binaries in a specific folder with pkg_add will solve the issue.
It jus... -
03:24 AM pfSense Packages Bug #870 (Resolved): Squid doesn't uninstall properly
-
02:59 AM pfSense Packages Bug #870: Squid doesn't uninstall properly
- Ok all is fine now.
Thanks
:-)
09/05/2010
-
08:16 AM Revision 4c5b8653: Add upgrade code for NAT 1:1 rules and bump config version.
-
08:16 AM Revision aecbc33e: Fix "use system default" setting for reflection on NAT 1:1 rule edit page and remove reference to nonexistent "externalmask" field.
-
08:15 AM Revision d3690bcb: Fix reflection on 1:1 rules and properly reinitialize the variable holding the CIDR mask on each iteration of the loop since having none specified is allowed.
-
07:32 AM Revision 8920455d: Revert "Add missing break statement in input validation code."
- This reverts commit 52bebb6f44293de1d184c2a6310ad6fb38c5f7f2.
-
06:39 AM Revision 52bebb6f: Add missing break statement in input validation code.
09/04/2010
-
10:28 PM Bug #874: Creating IPSec Phase1 failes in BETA4-20100904-0228
- Very well, Rickard u here's my forum post:
http://forum.pfsense.org/index.php/topic,28064.0.html -
09:58 PM Bug #874: Creating IPSec Phase1 failes in BETA4-20100904-0228
- I have tried both a normal and mobile tunnel, and none of the PSK modes prompt me for a CA.
Again, please use the ... -
09:51 PM Bug #874: Creating IPSec Phase1 failes in BETA4-20100904-0228
- Build Sat Sep 4 11:27:25 EDT 2010
vpn_ipsec_phase1.php
140 $method = $pconfig['authentication_meth... -
06:00 PM Bug #874 (Rejected): Creating IPSec Phase1 failes in BETA4-20100904-0228
- It works fine if you select a method that does not require a certificate. It also works fine if you select RSA mode a...
-
05:48 PM Bug #874 (Rejected): Creating IPSec Phase1 failes in BETA4-20100904-0228
- I am new to pfSense, but i must say I like it, so It might be a newbe error :)
When I try to start and setup the I... -
07:47 PM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- I think I need to refine this issue, because problems after upgrade and pppoe address renewal are simular but not the...
-
07:33 PM Bug #876: pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- After searching through logs and pfctl / netstat output I have found that after pppoe address renewal static route to...
-
06:46 PM Bug #876 (Resolved): pppoe on OPT - on upgrade/reboot/reconnect is lost on gateway status list
- This is not new bug. I have 3 firewalls now with 01.09 builds and always the same problem. Every upgrade or dhcp addr...
-
05:48 PM Bug #875 (Resolved): Uninstalling packages can remove system libraries
- If you install a package (like squid) which replaces a base system library (like LDAP), it will install its own copy ...
-
12:58 AM Revision 3896d93e: Do this check earlier rather than later, instead of moving the interface_bring_down call.
-
12:50 AM Revision 0a28d385: Revert "Rearrange function calls for wireless to prevent killing hostapd/wpa_supplicant at the wrong time."
- This reverts commit e93385d06ddf0e2888b3f5ee5764992a19f99120.
-
12:49 AM Revision fb2f0db1: Revert "Ticket #867. Do not destory interfaces other than preventing a loop for ppp interfaces during interface configuration."
- This reverts commit 990fb7a9a9b03f744c56792011f1c1e2950ce764.
09/03/2010
-
11:42 PM Revision 67e77adf: Protect against wpa_supplicant dying when bringing down interfaces to change wireless regulatory configuration.
-
10:54 PM Revision b2a66231: Ticket #873. Call write_config() before including file to avoid loosing already done modifications. While here do some code cleanup and formating to make it more readble.
-
10:50 PM Revision e93385d0: Rearrange function calls for wireless to prevent killing hostapd/wpa_supplicant at the wrong time.
- - Moved interface_wireless_configure call to after the new location of the interface_bring_down call to prevent it fr...
-
06:54 PM pfSense Packages Bug #870: Squid doesn't uninstall properly
- Can you please try with latest snapshot.
-
06:53 PM Bug #873 (Feedback): deinstall does not unset package <menu> and <service> tags from /conf/config.xml
-
05:11 PM Bug #873 (Resolved): deinstall does not unset package <menu> and <service> tags from /conf/config.xml
- Issue:
deinstall does not unset package <menu> and <service> tags from /conf/config.xml
Cause:
"require_once... -
05:59 PM Revision e49a2031: Ticket #843. Disable for now bringing down the interface unless we want to destroy it. While this is not all correct this seems to help alleviate problems when the parent is shared on cloned types.
-
05:49 PM pfSense Packages Bug #668: Snort does not deinstall properly
- This issue was caused by "require_once("config.inc");" in snort.inc.
I made a ticket about said issue "redmine.pfs... -
05:45 PM Revision c12fb6cb: Allow 1:1 rules to specify source and destination. This is almost the same as on Port Forward tab rules without protocol and ports.
-
05:32 PM Todo #734 (Feedback): Fix up appearance of SSH tunnel shell
-
05:28 PM Revision 8fc0b2dc: Add missing break;
-
04:14 PM pfSense Packages Feature #872 (Needs Patch): Tunnel Information and Control protocol
- Implement a package for Tunnel Information and Control protocol used by SixXS.
http://www.sixxs.net/tools/tic/ -
02:48 PM Feature #827 (Closed): CSR for User Certificates
- This is also no longer an issue due to the user certificate changes made yesterday.
-
02:05 PM Bug #832 (Closed): Diagnostics: Show Bogons was broken layout!
- This functionality has been moved to Diagnostic->Table.
-
01:59 PM Bug #843 (Feedback): Interface controls coupling unexpectedly
-
11:50 AM Revision 90388e48: Actually decode before writing to mpd.secret. Alos correct variable names. Discovered-by: Efonne(IRC)
-
11:36 AM Revision 2fc29020: Base64 encode passowrd fields for safer operations. Suggested-by: Efonne(IRC)
-
10:54 AM Revision ce968051: Upgrade user data too for new pppoe world.
-
10:46 AM Revision 18de0728: Correct function name. Pointy-hat: jimp@
- 09:47 AM Revision 08d97c59: Added wiki help page for Tables and removed help link for Bogons (now included in Tables).
09/02/2010
-
09:30 PM Feature #828 (Feedback): Import for User Certificates
- This was solved as a consequence of the certificate reorganization I just completed. User certificates can now be imp...
-
08:56 PM Revision 7e91b28a: We no longer need system_usermanager_addcert.php, its redundant functionality has been merged with system_certmanager.php
-
08:50 PM Revision ad9b5c67: Allow creating a user certificate, pre-fill some info, direct back to user edit screen if that is what led us here. If we are making a user certificate, give another choice to select a pre-existing certificate to associate with that user.
-
08:50 PM Revision b0884cde: Adjust add link.
-
08:50 PM Revision c25f73ae: Adjust the user manager to use cert references on the user instead of the actual certs.
-
08:50 PM Revision 3554c9f0: When generating a user cert, put it in with the rest of the certificates and store a reference in the user.
-
08:50 PM Revision 79e1ffed: Update sync code since CERT/CA have moved.
-
08:50 PM Revision 0879599c: Only allow a certificate to be deleted if it is not currently in use.
-
08:50 PM Revision dea98903: Remove two unused functions (now useless) and add a few more utility functions.
-
08:50 PM Revision d590fa20: Show was a certificate is used for, if anything.
-
08:50 PM Revision 8fefb9dd: Upgrade code to merge user certificates with normal certificates.
- 08:42 PM Revision 395ba5d1: Remove obsolete Bogons files
- 08:24 PM Revision 1c9ed80d: Added missing Save message.
- 08:19 PM Revision 6c474eb8: Remove redundant 'Show Bogons' link and added Bogons list to Diagnostics -> Tables while preserving the same download functionality.
-
07:40 PM Bug #714: Cellular RRD Graph Shows w/o 3G Modem Installed
- Not quite fixed. Cellular still appears if I click the 'Settings' tab. It doesn't appear while any of the other tabs ...
-
07:36 PM Bug #863: floating rules breaks passive mode ftp
- Again with newer snapshot please.
-
07:30 PM Feature #871 (Closed): PPTP client
- Will be on 2.0.
-
01:44 PM Feature #871 (Closed): PPTP client
- Include support for pfSense as a PPTP client.
This would be very useful where the router admin doesn't run the other... -
05:59 PM Revision 6ae9f9b7: Upgrade code for pppoe.
-
05:34 PM Revision 60b8b580: Add my copyright.
-
05:33 PM Revision 926677d4: These are obsolete now.
-
05:32 PM Revision b1e2b044: Forgot to add the new file for pppoe.
-
05:27 PM Revision 0e642c78: Make possible to run multiple instances of pppoe server. Not yet switched to mpd4.
-
05:11 PM Revision f3ceee6e: Fix typo: s/write_confg/write_config/
-
04:52 PM Feature #864 (Resolved): Diagnostics -> Show Bogons is now redundant.
- wagonza resolved.
-
04:44 PM Bug #837 (Resolved): dhcpleases still not starting at boot time
-
09:58 AM Bug #837: dhcpleases still not starting at boot time
- This is resolved.
-
03:56 PM Bug #838 (Resolved): DNS servers are not cleared from resolv.conf when link comes down
-
10:13 AM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- This works now. This issue can be closed.
- 02:18 PM Revision c73c126f: Bump 7.1 -> 8.1
- 02:10 PM Revision 7b57d9bd: keep src-nodes the same as states, as it is by default. in some circumstances this can limit per-host connections
-
10:09 AM Bug #843: Interface controls coupling unexpectedly
- Can we get this classified for 2.0?
- 07:09 AM Revision 00710912: keep src-nodes the same as states, as it is by default. in some circumstances this can limit per-host connections
-
05:10 AM pfSense Packages Bug #870 (Resolved): Squid doesn't uninstall properly
- After uninstalling squid,
the only account than can access the web gui is the admin account
others can't any more...
09/01/2010
- 11:33 PM Revision 4c4be113: Revert "Since IPFW is redirecting to the captive portal running on 127.0.0.1:"
- This reverts commit d624c7902cf71d8fe739fd68595784949902a948.
- 10:52 PM Revision d624c790: Since IPFW is redirecting to the captive portal running on 127.0.0.1:
- 65531 11375 1820680 fwd 127.0.0.1,8000 tcp from any to any in
We need to permit traffic from the Captive Portal inte... -
09:52 PM Revision 00621aee: Add even carp ips to the sloppy state filter rules of CP.
-
08:53 PM Revision 56c100ab: Fix line endings on remaining files that did not have the same line endings as everything else.
-
08:19 PM Bug #869 (Closed): Captive Portal rule does not work when using a restrictive ruleset
- The rule is correct as it is, where it passes to 8000/8001 to $cpinterface, and it all functions correctly. The reaso...
-
07:37 PM Bug #869 (Closed): Captive Portal rule does not work when using a restrictive ruleset
- Directions to reproduce:
Setup captive portal on OPT1.
Add a rule on OPT1 interface:
allow
protocol any
src:... -
07:26 PM Revision b4e6524c: CA/CERT Move
-
07:18 PM Revision 4e990e1e: CA/CERT Move
-
07:15 PM Revision 1e332e98: CA/CERT Move
-
07:06 PM Revision b9d959b9: Bump version of config so upgrade code will run.
-
07:06 PM Revision 9ad72e5e: Moving certs and ca out from under system. Provide upgrade code to move existing certs.
-
05:55 PM Bug #863: floating rules breaks passive mode ftp
- Tested with:
> 2.0-BETA4 (i386)
> built on Wed Sep 1 11:07:08 EDT 2010
> FreeBSD 8.1-RELEASE
And has the sa... -
05:34 PM Bug #863 (Feedback): floating rules breaks passive mode ftp
- Test with the latest snapshot.
-
05:40 PM Bug #582 (Closed): Add all Diffserv options
- Duplicate of #670.
-
05:39 PM Bug #670: Diffserv Code Point in firewall rule isn't match with the result of "pfctl-sr"
- For history ticket #582 has useful links.
-
05:37 PM Bug #670 (Feedback): Diffserv Code Point in firewall rule isn't match with the result of "pfctl-sr"
- We have these defined now:...
-
05:10 PM Bug #853: PPPoE Server radius config not applied
- Thanks for the super quick fix. I can confirm that this is working now.
There are a few other fields on that page ... -
04:42 PM Revision 064e1807: And some safe belts to prevent wrong lines in inetd.conf
-
04:09 PM Revision 68071477: Just take action when there is a file otherwise just call filter_reload.
-
03:51 PM Revision e8471084: Ticket #866 #632. Save old settings or actions to be taken for reconfiguring a route/vip on a tmp file and make use that information when apply settings buttons is clicked. This makes the gui behave as expected.
-
03:37 PM pfSense Packages Bug #868: transparent Squid breaks captive portal
- The ipfw fwd gets hit, but I believe after that it gets hit by the pf rdr for Squid. A 'no rdr' for traffic destined ...
-
03:35 PM pfSense Packages Bug #868: transparent Squid breaks captive portal
- The issue is likely that the two are competing for trying to redirect connections going to port 80 and the squid pack...
-
03:03 PM pfSense Packages Bug #868 (Closed): transparent Squid breaks captive portal
- Squid's transparent redirect breaks captive portal.
-
03:04 PM Bug #851 (Closed): Portal Page never loads with multiple vlan on the same interface
- it's Squid's transparent redirect that kills it. A 'no rdr' from the package for CP should work around that, but that...
-
01:51 PM Bug #851: Portal Page never loads with multiple vlan on the same interface
- Copy here the problematic /tmp/rules.debug or config.xml and i will try to fix it.
-
10:50 AM Bug #851: Portal Page never loads with multiple vlan on the same interface
- What do you mean when you say "do not run squid on port 8000" ?
-
05:59 AM Bug #851: Portal Page never loads with multiple vlan on the same interface
- Just do not run squid on port 8000 :)
-
05:54 AM Bug #851: Portal Page never loads with multiple vlan on the same interface
- Ok it's work fine whithout squid installed.
How can we have squid and Portal captive working on the same machine ? -
12:32 PM Revision 8e0c3760: Ticket #568. Do not show the save/cancel buttons on the edit page of firewall rules if that are advanced options set.
-
12:13 PM Revision 990fb7a9: Ticket #867. Do not destory interfaces other than preventing a loop for ppp interfaces during interface configuration.
-
11:31 AM Bug #743 (Feedback): Installation: textual label: (Select task="Advanced Installation") <> (Are you sure="Custom Install")
-
10:56 AM Bug #672 (Feedback): Reflection, netcat usage error
- It should not error out, but it will skip mostly aliases with multiple ports!
-
09:59 AM Bug #632 (Feedback): Change type of Virtual IP not work.
-
09:57 AM Bug #866 (Feedback): Changing a route's mask leaves the old route
-
06:47 AM Feature #753 (Feedback): Add OpenVPN foreign_option support
- Can you please be more specific on this?
-
06:42 AM Bug #781: Entering sim code problem on a Huawei E1752
- I will leave this open though not a target for 2.0.
Usually this is a pilot error and the modem should respond with ... -
06:37 AM Bug #568 (Feedback): firewall rules advanced clean up
-
06:19 AM Bug #867 (Feedback): Activating vlan interface via webgui deletes interface
- 04:33 AM Revision 5281b3e8: also include split_dns, as Cisco VPN clients won't query across the VPN without it.
08/31/2010
-
08:32 PM Revision 2db1f552: There are no interfaces stored in static routes. Correct code for that.
-
08:19 PM Revision 3d6bbe4c: Make a refid even for user certs.
-
07:53 PM Revision 01d4b621: Use exec() for is_process_running since system() displays command output(not sure why). Also handle captiveportal specially and use proper function to start/stop it.
-
07:23 PM Revision 9eda7259: More fixes to status services.
-
07:11 PM Revision 319cbd5e: Correct binaries and find_dhclient_process
-
07:07 PM Bug #867 (Resolved): Activating vlan interface via webgui deletes interface
- This may be a duplicate issue attached to something else, apologies if so. Essentially, the webGUI is destroying inte...
-
07:03 PM Revision c2151973: $g is needed here.
-
07:01 PM Revision ba8495f0: Ticket #485. Correct code and use pkill/pgrep to match or kill process. Since these utilities know how to handle pidfiles and exact matches on process names.
-
06:59 PM Revision ce6d1106: Namecheap doesn't need a username, just hostname+password.
-
06:47 PM Revision 18f15f68: Improve Namecheap DynDNS update response parsing.
-
06:29 PM Feature #864: Diagnostics -> Show Bogons is now redundant.
- Yeah that's true. Could be combined in the future.
-
06:00 PM Feature #864: Diagnostics -> Show Bogons is now redundant.
- It isn't completely redundant. It gives you a button to download the latest data from whatever web site it gets that...
-
02:16 PM Feature #864 (Resolved): Diagnostics -> Show Bogons is now redundant.
- With Diagnostics -> Tables now showing all pf tables, Diagnostics -> Show Bogons is redundant and, in my opinion, unn...
-
06:27 PM Feature #861: Clicking MAC Address in DHCP Leases Sends WOL Packet
- Adding a confirmation prompt would be sufficient for letting the user know what it does.
-
10:26 AM Feature #861: Clicking MAC Address in DHCP Leases Sends WOL Packet
- Additionally, this WOL function appears only for things listed as 'offline', as determined by presence in the ARP tab...
-
10:24 AM Feature #861 (Resolved): Clicking MAC Address in DHCP Leases Sends WOL Packet
- When clicking a listed MAC address in the DHCP lease status, a WOL "magic packet" is automatically sent to the given ...
-
06:09 PM Revision c48ddff2: No functional changes just remove redundant code.
-
06:02 PM Revision aa79a721: More fixes to openvpn to catch up with latest changes.
-
05:58 PM Revision 0349e09d: Correctly pass parameters for openvpn.
-
05:57 PM Bug #863: floating rules breaks passive mode ftp
- I'm not familiar with exactly what that output is, but it looks like this:...
-
05:49 PM Bug #863: floating rules breaks passive mode ftp
- This is pfctl -vvss output (note the data connection was 64.187.64.40:56329 -> 64.187.65.74:41768 this time):
<pre... -
05:27 PM Bug #863: floating rules breaks passive mode ftp
- Can you show me an pfctl -vvss when this happens.
Seems the automatic handling might be creating the state wrongly f... -
01:34 PM Bug #863: floating rules breaks passive mode ftp
- > Please show traces of traffic.
See attached pcap file. That is me connecting/logging in to the ftp server, is... -
11:21 AM Bug #863: floating rules breaks passive mode ftp
- Please show traces of traffic.
Provide either rules screenshots or the /tmp/rules.debug content.
And please also ... -
11:13 AM Bug #863: floating rules breaks passive mode ftp
- Sorry, this is on 2.0-BETA4 from Aug 30.
-
11:12 AM Bug #863 (Closed): floating rules breaks passive mode ftp
- I have a floating rule that allows port 21 traffic to an ftp server, and later on a catch-all floating rule to deny a...
-
05:56 PM Revision e3c88b77: Better require_once.
-
05:55 PM Revision 246a887a: Bring up openvpn up to speed and try to bring this file near to useful/readable.
-
05:38 PM Revision d9a417f8: Check for 0.0.0.0/0 to not be added to the table. It breaks stuff as in http://forum.pfsense.org/index.php/topic,27963.0.html
-
05:37 PM Revision 1ee3ed0f: Check for 0.0.0.0/0 to not be added to the table. It breaks stuff as in http://forum.pfsense.org/index.php/topic,27963.0.html
-
05:20 PM Revision 4d3c8697: Fixes #862. Check if we have filter rules or nat rules.
-
05:16 PM Bug #865 (Resolved): Static routes for interface not added on bootup
- Seems OK now. Thanks!
-
05:08 PM Bug #865 (Feedback): Static routes for interface not added on bootup
-
04:33 PM Bug #865: Static routes for interface not added on bootup
- Correct static route handling.
-
03:24 PM Bug #865 (Resolved): Static routes for interface not added on bootup
- I have a static route for the LAN interface that does not get added on bootup.
10.0.0.47/32 lan - 10.0.250.2 LAN S... - 04:29 PM Revision 4c8a8653: Forced commit to note that should have read RFC952
- 04:29 PM Revision 2d994672: Forced commit to note that should have read RFC952
- 04:27 PM Revision d0ce82a3: Do not allow a numeric starting character or an ending hyphen in DHCP hostnames according to RFC1123
-
04:21 PM Revision e91e23b9: Fix spelling error. Thanks-to: wagnoza (IRC)
-
04:00 PM Revision bf34296a: Do proper checking on the interval used for dnswatch. Otherwise might pass wrong parameters to dnswatch.
-
03:37 PM Bug #866 (Resolved): Changing a route's mask leaves the old route
- If you change the mask on a static route, you end up with both the old route and the new route. e.g. start with a rou...
-
03:34 PM Revision c13b0b31: Ticket #777. Use Base64 encoding for file content so javascript/php does not get confused!
-
03:31 PM Revision 4f1bace5: Ticket #777. Allow long length of variables content to make happy suhosin(whoever he his)!
-
03:02 PM Bug #485 (Feedback): fake start with status_services.php and installed packages
-
02:13 PM Revision b9d017f5: Ticket #733. Provide a description that custom bandwidths cannot exceed 30% of entered bandwidths for interfaces/links.
-
02:01 PM Bug #786: UDP traffic blocked by a floating rule
- I updated to the last build and still have the bug.
( 2.0-BETA4 (i386) built on Tue Aug 31 07:03:18 EDT 2010 )
Ho... -
09:44 AM Bug #786 (Feedback): UDP traffic blocked by a floating rule
- I cannot duplicate this anymore on latest snapshots too.
-
01:54 PM Bug #851: Portal Page never loads with multiple vlan on the same interface
- I'll try tommorow with squid uninstalled.
-
01:40 PM Bug #851: Portal Page never loads with multiple vlan on the same interface
- I suspect Squid in transparent mode causes that, does it work if you uninstall Squid?
-
01:35 PM Bug #851: Portal Page never loads with multiple vlan on the same interface
- I have 2 interfaces.
Wan on em0 with one Vlan
and 4 Vlan (10 20 30 50) on re0.
The Vlan 50 will be dedicated to ... -
05:38 AM Bug #851 (Feedback): Portal Page never loads with multiple vlan on the same interface
- Please provide more information about this.
I tested yesterday and it worked fine even though i had configured the p... -
12:47 PM Revision 62a4abc9: Ticket #543. Do not allow to change an interface already configured to a type none if it is referenced by VIPs and also do not allow VIPs to be configured on an interface with type none. Maybe the latest should be relaxed to only disallow this for ipaliases?!
-
12:20 PM Revision 9dea60d1: Ticket #834. Check if the passed value is an url too. Seem they are valid inputs for tftp cases.
-
11:30 AM Todo #750: No explanation of schedulers in the config screens
- This is open discussion what to put in there so forwarding to Future.
-
11:30 AM Bug #862: rename interface group error
- Applied in changeset commit:"4d3c8697b105956c838912ebc31c679498c6e286".
-
11:25 AM Bug #862 (Feedback): rename interface group error
- Should be fixed on newer snapshots.
Thank you. -
10:59 AM Bug #862 (Resolved): rename interface group error
- If you edit an interface group, change the name, and hit save, it prints the error:...
-
11:23 AM Revision 6900e5b2: Ticket #859. Remove strange character at the end of the xml. Also fix my name partially since our parser does not allow my special character there.
-
11:19 AM Revision f814d3a6: Make this more readble.
-
11:16 AM Revision 7e96ca27: Ticket #860. Honor the parameter if passed.
-
11:12 AM Revision 7c73f504: Ticket #860. Correct code for proxyarp/choparp starting. Not sure why php did not bail at some code here missing curlies :).
-
10:33 AM Bug #755: dnswatch not working
- Will check and revert but might take awhile since my remote site is unavailable at the moment :$
-
10:06 AM Bug #755 (Feedback): dnswatch not working
- Can you please test the latest snapshot?
For history
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits... -
09:42 AM Bug #836 (Feedback): Captive portal logout popup windows doesn't disconnect the user
- Can you please try with the latest snapshot and see if you can replicate.
Also please paste the srouce code of the lo... -
09:39 AM Bug #777 (Feedback): Edit File wipes out file on save
- It works for me now!
-
08:18 AM Bug #733 (Feedback): Shaper: Unexplained 30% bandwidth max restriction in p2p catch all
-
06:53 AM Bug #543 (Feedback): IP alias input validation problem
-
06:25 AM Bug #834 (Feedback): DHCP server options for TFTP server doesn't allow arbitrary strings
- Please check the latest snapshots.
-
06:20 AM Bug #859 (Feedback): OpenVPN wizard stopped working
-
05:29 AM Bug #859: OpenVPN wizard stopped working
- I removed a special character that was present in the XML file of openvpn wizard.
It should be ok now. -
02:10 AM Bug #859 (Resolved): OpenVPN wizard stopped working
- The OpenVPN setup wizard just goes to a blank page now.
-
05:17 AM Bug #860 (Feedback): Multiple PARP entries do not function
- Seems the code was missing some curlies and was using wrong variable names.
-
02:11 AM Bug #860 (Resolved): Multiple PARP entries do not function
- Where there are multiple PARP entries, choparp only runs on the last defined PARP IP/subnet, leaving all the other en...
-
04:03 AM Revision c305abd5: Fix success test.
-
03:40 AM Revision 61c30081: First try at a dyndns update type for Namecheap.com servers.
- 02:20 AM Revision 2f384448: Check for less time available on remote node
- 02:01 AM Revision 6c9ca678: Only make one XMLRPC call
-
12:48 AM Revision 87000ded: Fix text for the source port note on firewall rules.
- 12:34 AM Revision fa3ab36a: Sync rolls if needed. This might be required if the operator removed/added or changed the rolls on the master node
- 12:06 AM Revision 10370262: Use enable voucher variable
08/30/2010
- 11:37 PM Revision 86385ef3: Merge remote branch 'mainline/master' into inc
- 11:36 PM Revision 47f12397: Fix gettext calls with printf to permit change strings order
- 10:45 PM Revision 701a250b: Fix gettext calls with printf to permit change strings order
- 10:36 PM Revision 5e56c56d: Merge remote branch 'mainline/master' into inc
- Conflicts:
etc/inc/captiveportal.inc - 10:15 PM Revision 6426fb80: Move to javascript/
- 10:10 PM Revision 1cd94dc8: Adding base64 js code
- 10:05 PM Revision 1b94e73b: Restart dnsmasq on change in case of dns rebinding changes -
- 10:04 PM Revision ee650539: Revert "Restart dnsmasq on change in case of dns rebinding changes"
- This reverts commit a94e3f2016bec3f72aae2fd3e1575515ff93f5f6.
- 10:02 PM Revision a94e3f20: Restart dnsmasq on change in case of dns rebinding changes
-
09:31 PM Revision 6733f0f9: Add crl as a listtag
- 09:25 PM Revision feb252a2: Add a note about pressing cancel if user does not want to recreate the vouchers
- 08:29 PM Revision c2056357: Fix formatting in if()
- 08:25 PM Revision 023aa1f2: Detect and use a sample voucher page when vouchers are defined. Otherwise default to the user/pass default page.
-
08:11 PM Revision c79439f1: Actually it should test the other way.
-
07:56 PM Revision 7413cbfd: Ticket #846. Do not try to add an interface to the bridge during an event of LINK_UP.
-
07:51 PM Revision 69695597: Ticket #846. Do not reconfigure an 'none' configured interface.
- 06:42 PM Revision 2c7497cb: Avoid the error: Warning: Invalid argument supplied for foreach() in /usr/local/www/services_dhcp.php on line 256
- 06:28 PM Revision 9edb9d74: Use complete path to call bottom-loader.js because we have chdir on some places that break it (e.g. status -> rrd_graph)
- 06:21 PM Revision ce7c3bb5: Escape $ variables
- 05:30 PM Revision 80a2fedf: Ensure php.ini is not found before setting up php
-
05:05 PM Revision d76c9298: Correct checking if a ppp is in use to not allow accidental deletions.
- 04:57 PM Revision 830c33be: Add Captive Portal voucher database sync to secondary nodes. How this works is you designate one of your access points with a voucher database as the master and then on the slave nodes you setup the 4 fields on the voucher edit screen. This will then sync the voucher database and anytime someone attempts to authenticate the slave nodes will use XMLRPC over to the master node to ensure that the voucher has not been used, etc.
- Add generate certificate option on the voucher edit screen
-
04:50 PM Revision 44c7cce5: Fix gettext mishap/typo. Cosmetic only. Fixes #857
-
04:14 PM Bug #807: Cannot set the keymap to anything other then the default
- This needs ...
-
04:07 PM Revision b0b6d575: Require an authentication backend if the user chooses an OpenVPN server mode that needs user auth. Failing to do so can result in a configuration error.
-
03:57 PM Bug #846 (Feedback): if_bridge triggers link state cycling on em(4)
-
03:40 PM Bug #846: if_bridge triggers link state cycling on em(4)
- It is just that on some enable/disable of capabilities the em(4) needs to reinit itself(according to code).
-
02:54 PM Bug #846: if_bridge triggers link state cycling on em(4)
- no change with latest em(4) driver
-
02:39 PM Bug #858 (Resolved): Widget settings will not save settings in some cases
- If you have the OpenVPN widget active and the firewall logs widget active, and the OpenVPN widget comes after the fir...
-
12:55 PM Bug #857 (Feedback): firewall_rules_edit.php Typos
- Applied in changeset commit:"44c7cce5f93a1ab0cddbb547c06fdff4d797a2d4".
-
12:44 PM Bug #857 (Resolved): firewall_rules_edit.php Typos
- Section: Source port range
Someone was copy/paste happy with the )." part.
Specify the source port or port rang... - 11:26 AM Revision 487caee6: Merge remote branch 'mainline/master' into inc
- Conflicts:
etc/inc/interfaces.inc -
05:24 AM Feature #856 (Rejected): Allow colour coding of rules
- Our access rules typically include a few different theoretical sections, for example:
VPN rules (allowing access to ... - 01:15 AM Revision dff71b6b: Add Captive Portal CARP configuration synchronization
08/29/2010
-
04:03 PM Bug #839 (Resolved): Need patches from PR 149185 and 144642
- 06:39 AM Revision 3c2d0a1d: fix text
08/28/2010
-
07:26 AM Bug #846: if_bridge triggers link state cycling on em(4)
- This should be retested with the latest drivers in 2.0.
Otherwise mostly this is a bug of em(4) ioctl handling of SE... -
07:25 AM Bug #781: Entering sim code problem on a Huawei E1752
- Can you add to line 1487...
08/27/2010
-
09:03 PM Revision 89b2f774: Add missing space for separating the text for this option from the last one.
-
08:59 PM Feature #8: Clear states after failover
- shocking. ;) anything further from what's already done isn't critical in the vast majority of cases, has an availabl...
-
08:39 PM Feature #8: Clear states after failover
- I disagree strangely enough :). The feature request took somewhat a turn as it could solve other problems, But for me...
-
06:44 PM Feature #8 (Resolved): Clear states after failover
- The point of this particular issue is to clear states on a failed connection, which works now. Killing them on a conn...
-
06:23 PM Feature #8: Clear states after failover
- When wan fails to wan2 it do clear the states. But when wan connection recover states doesn't get cleared and my voip...
-
03:45 AM Feature #8: Clear states after failover
- Confirmed fail over is working as expected for me in build 2.0-BETA4 (i386) built on Thu Aug 26 09:00:28 EDT 2010
T... -
08:55 PM Feature #855 (Resolved): Ability to selectively kill states on gateway recovery
- The current practice of killing all states when a connection goes down on that downed connection is fine for the majo...
-
08:37 PM Revision 43131698: Ticket #695. Restore accidentally removed char.
-
07:07 PM Bug #781: Entering sim code problem on a Huawei E1752
- ppp.log...
-
06:16 PM Revision dd0026b9: Ticket #695. Fix the advanced icon showing on firewall rules page.
-
06:05 PM Revision 17a71003: Fixes #714. Do not show the cellular graphs if there is no ppp interface defined.
-
05:00 PM Bug #695: In firewall rules and NAT some wrong displaying.
- the last one is a general issue in all browsers, any time the rule list gets too wide that happens (for instance usin...
-
04:37 PM Bug #695: In firewall rules and NAT some wrong displaying.
- Fixed thanks.
-
03:38 PM Bug #695: In firewall rules and NAT some wrong displaying.
- line 498 in firewall_rules.php:...
-
02:16 PM Bug #695 (Feedback): In firewall rules and NAT some wrong displaying.
- The last one is a bug in IE7 as far as i am aware.
-
02:05 PM Bug #714 (Feedback): Cellular RRD Graph Shows w/o 3G Modem Installed
- Applied in changeset commit:"17a710031ba8a8c0f3c402cdec8311a993312f31".
-
12:13 PM Revision 37d7de2d: Fix some PPPoE server radius variable references. Fixes #853.
-
12:00 PM Bug #833: route-to for firewall-initiated traffic stops functioning when default gateway unreachable
- This looks to be fixed. Was easily replicated before and can't do so now. Leaving to feedback for a bit for more test...
-
11:46 AM Revision 5b9ba75a: Change the require() to require_once()
-
11:10 AM pfSense Packages Bug #854 (Feedback): Unable to access web config interface for package NRPEv2
- Applied in changeset commit:"081a2b6b5f4fa1627bf544a3553c9b6419426464".
-
11:03 AM pfSense Packages Bug #854 (Resolved): Unable to access web config interface for package NRPEv2
- NRPEv2 package : in web interface when accessing Services-NRPEv2, I get :
Fatal error: Cannot redeclare filter_pfl... -
10:37 AM Revision 635633c7: Revert the top field change shift as these break a lot of other installs.
-
08:15 AM Bug #853 (Feedback): PPPoE Server radius config not applied
- Applied in changeset commit:"37d7de2d2b073545c18d95619d633fdaa5d4d7f4".
-
05:31 AM Bug #853 (Resolved): PPPoE Server radius config not applied
- Just playing with pfSense (2.0-BETA4 (i386) built on Thu Aug 26 23:39:42 EDT 2010) and installed the freeradius packa...
-
07:23 AM Revision dfeb6800: Correct math for the 12 hour graph so it doesn't show the empty hours
-
12:14 AM Bug #732 (Resolved): Shaper: Multip Lan wizard does not create lan connection queues
08/26/2010
-
10:12 PM Bug #732: Shaper: Multip Lan wizard does not create lan connection queues
- Ermal, I just tried this out in the latest snapshot and everything works like it should. Thanks for fixing this issu...
- 08:10 PM Revision 59345b3c: Fix associated rule source address changes on NAT Port Forward
- When we change the source address on a NAT Port Forward rule that had
an associated rule, we need to change the assoc... -
07:49 PM Feature #852 (Rejected): Add Captive Portal default realm
- Hi,
There is one particular feature I would like added to the Captive Portal module. It would be nice to have a de... -
07:25 PM Feature #13: wireless page to have option to select transmit and receive antennas
- It may be different depending on the card, but it has been as labeled on two different single-antenna systems with di...
-
10:29 AM Feature #13: wireless page to have option to select transmit and receive antennas
- im still not sure 0,1,2 values r labeled properly coz when i set all 3 to 0, i get the best transmittion and receptio...
- 06:32 PM Revision e57c91a2: Use the same div ids and structure from dashboard on status_graph to make it more flexible with custom themes
-
05:06 PM Revision 39a12bf5: Limit description of rules to 64 chars as that is what pfctl will accept.
-
04:57 PM Revision 4e56c0b8: Switch to the right values for openvpn 2.1 according to the documentation.
-
04:50 PM Bug #833 (Feedback): route-to for firewall-initiated traffic stops functioning when default gateway unreachable
- It should behave correctly now.
A patch was added to allow packets sent from the host to reach pf(4) even though a... -
04:47 PM Revision a3733a0c: Do not allow proxy arp to be edited if it references a carp.
-
04:38 PM Revision e19b7d1e: Allow carp interfaces to sit on top of aliases. Also add safety belts to ipalias deletion for this to avoid breakage. Trigered-by: http://forum.pfsense.org/index.php/topic,27834.0.html
-
03:34 PM Revision 556687cf: Use www_path here instead of a relative path.
-
02:52 PM Bug #845 (Feedback): Need patch for PR usb/140883
- The files are now in the latest builds.
-
02:52 PM Bug #839 (Feedback): Need patches from PR 149185 and 144642
- They are in the latest builds.
-
02:41 PM Revision 1bd4b4dc: Enforce length of OpenVPN server descr in wizard.
-
02:21 PM Revision 48f23632: Fixes #847. Check even interface groups before allowing deletion of an interface. Also try to readd to a group an interface when configuring.
-
01:54 PM Revision 6d80857f: Put some size tags on these fields.
-
11:09 AM Feature #850: Rename "Overload Tables" in the Diagnostics menu to "Tables"
- Much nicer. Thanks very much!
-
10:26 AM Bug #684: interface status, disconenct button doesnt work
- seems to work fine on the latest snap.
-
10:09 AM Revision 52ab1d44: Revert "Use get_real_interface here and compare to that to make it more generic instead of doing this wireless-specific stuff." which probably ended up doing some recursion in various cases, especially slowing down as it goes down a larger list in this foreach loop.
- This reverts commit b635c0601c65628807d844911adae3c4ef00d240.
-
09:19 AM Bug #851 (Closed): Portal Page never loads with multiple vlan on the same interface
- I have configure the Captive Portal on one vlan but the Portal Page never load itself.
I must load http://10.171.2... -
08:30 AM Bug #847: Deleting interface leaves remnant in interface groups
- Applied in changeset commit:"48f236320d930978ecb8b7eabb5256c368ba1de9".
-
08:27 AM Bug #847 (Feedback): Deleting interface leaves remnant in interface groups
08/25/2010
- 10:08 PM Revision c07b05e0: s/overload//
- 10:07 PM Revision 450bf4e2: Rename to 'Tables'. Ticket #850
-
09:21 PM Revision 3f178953: Fix text for successful authentication test. Fixes #849
-
06:08 PM Feature #850 (Feedback): Rename "Overload Tables" in the Diagnostics menu to "Tables"
-
06:06 PM Feature #850: Rename "Overload Tables" in the Diagnostics menu to "Tables"
- originally the script only showed the overload tables but it looks like its functionality has been expanded to all ta...
-
04:36 PM Feature #850: Rename "Overload Tables" in the Diagnostics menu to "Tables"
- agreed. It started out as something different than it ended up being if I recall.
-
04:09 PM Feature #850 (Resolved): Rename "Overload Tables" in the Diagnostics menu to "Tables"
- The menu item "Overload Tables" in the Diagnostics menu is confusingly named. It simply contains pf tables, which are...
-
06:00 PM Bug #849 (Feedback): diag_authentication.php Results Formatting
- Applied in changeset commit:"3f1789530e1223b31c76e3f4186592fc890c19e0".
-
01:16 PM Bug #849 (Resolved): diag_authentication.php Results Formatting
- Tab: Diagnostics > Authentication
The results return with bad formatting and typos.
Example:
User: <user> authenti... -
05:24 PM Todo #595: Test IPsec with NAT
- Actually, I suppose it just needs the NAT on both sides of the VPN.
-
05:08 PM Todo #595: Test IPsec with NAT
- I don't think that is something that you can currently resolve with PF on any type of site-to-site VPN connection.
-
03:41 PM Todo #595: Test IPsec with NAT
- within the same subnet, that's good. The tricky part is what if it's a completely different subnet, such as the case ...
-
03:39 PM Todo #595: Test IPsec with NAT
- Larry Titus wrote:
> Much to my surprise, it works!
States Table
Proto Source -> Router -> Destination State... -
03:38 PM Todo #595: Test IPsec with NAT
- Much to my surprise, it works!
- 04:18 PM Revision 90551807: New Package XML tag 'tab_level' allows for multiple rows of tab displays.
-
02:50 PM Bug #832: Diagnostics: Show Bogons was broken layout!
- Not on mine unless compatibility view is enabled (which breaks other things too, don't enable it).
-
02:41 PM Bug #832: Diagnostics: Show Bogons was broken layout!
- FYI, it's broken in IE8 too (tested on both XP and Win 7).
-
02:01 PM Bug #848: Remove 'Close' button from firmware update screen?
- I think I've noticed other areas where that doesn't really make sense, not a critical issue though. Need to add to th...
-
10:11 AM Bug #848 (Closed): Remove 'Close' button from firmware update screen?
- When performing a firmware update from the web GUI and the "in progress" screen is displaying, a close button is pres...
-
01:02 PM Feature #677: Allow custom SMTP port for notifications
- Tested and working.
-
09:40 AM Bug #847 (Resolved): Deleting interface leaves remnant in interface groups
- Beta4 snapshot from Tue Aug 24 01:26:38 EDT 2010, deleting an interface (OPT5 in my case) that was a member of interf...
-
08:48 AM Bug #835: Captive portal non redirecting correctly when logout popup is enabled
- I was on the daily snapshot when i tested this, i'm going to udate to today snapshot and check again
i'll post the... -
01:56 AM Bug #846 (Closed): if_bridge triggers link state cycling on em(4)
- This is primarily a reminder to figure out more about this and report it upstream. Another question arises here - sho...
08/24/2010
- 11:11 PM Revision b260c8e0: Improve the standard Captive Portal pages when a custom page is not set
- 10:30 PM Revision b6a1b5b7: Correct text to read when a logout event occurs
- 10:06 PM Revision c7cdfe20: Remove ORIGINAL_PORTAL_IP option. Never did get it working correctly.
-
07:07 PM Revision e80c551c: Use correct name for include
-
05:34 PM Bug #845 (Resolved): Need patch for PR usb/140883
- http://people.freebsd.org/~yongari/axe/if_axe.c
http://people.freebsd.org/~yongari/axe/if_axereg.h
confirmed work... -
04:32 PM Bug #374: "Register DHCP leases in DNS forwarder" doesn't work
- Well I finally got around to updating to a new snapshot a couple of days ago and it seems to still be resolving even ...
-
02:58 PM Bug #839: Need patches from PR 149185 and 144642
- and http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/144642 too
-
02:50 PM Revision 4478867f: Shift the fields from "top" once more to get our processor statistics back
-
02:47 PM Revision c6f4586c: We need to require the globals include for finding our theme specific rrd color includes.
- 02:45 PM Revision c14d9967: Resolve issue where used variable might be an array (multiple voucher rolls)
-
02:22 PM Revision 5f250a24: Apparently we use domain sockets now for collecting user statistics. This was causing the nc command to wait _very_ long for a timeout and essentially destroy the graphing backend and the openvpn user statistics in the process
-
01:28 PM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- I mean, I presume that this nameserver handling is done this way to keep the GUI responsive, so is there a way to get...
-
11:26 AM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- What do you mean efficent?
-
10:58 AM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- Works now.
Is there any efficient way to make adding and removing nameservers faster?
-
11:34 AM Bug #835: Captive portal non redirecting correctly when logout popup is enabled
- I fixed that issue. That is why i am requesting more info.
-
11:30 AM Bug #837: dhcpleases still not starting at boot time
- I would not consider it critical because behaviour is the same.
that is expected on restart. -
06:46 AM Bug #837: dhcpleases still not starting at boot time
- Okay, it starts at boot time and populates the /var/etc/hosts files with local host names properly. e.g. . . .
[2.... -
06:17 AM Bug #837: dhcpleases still not starting at boot time
- Okay, works now with changes I just commited.
-
11:13 AM Revision 92150bd8: Revert "Remove redundant call to system_dhcpleases_configure. It is called in services_dnsmasq_configure."
- This reverts commit 5f0b6a8f2aa3e5875188cd6720d037ef25503bca.
-
11:08 AM Revision b7142c29: Ticket #8. Use correct variable. Discovered-by: Mark Huijgen
-
10:52 AM Bug #840 (Feedback): RRD scripts not collecting new data into the RRD
- This was caused by a change in the admin server settings for OpenVPN servers. This caused the data collector to fail....
-
10:36 AM pfSense Packages Bug #844 (Resolved): Open VM Tools Won't install
- The problem seems to be with open-vm-tools-nox11-253928.tbz
The installation returns:
$ cat /tmp/pkg_mgr_Open-VM-To... -
10:15 AM Bug #715: RRD Graph on Throughput Contains No Info
- Updated to "2.0-BETA4 (i386) built on Tue Aug 24 02:26:59 EDT 2010 FreeBSD 8.1-RELEASE" this morning, problems gone. ...
-
01:04 AM Bug #715 (Feedback): RRD Graph on Throughput Contains No Info
- I've committed a fix for the original issue reported. Earlier, I also fixed the issue of 'Allgraphs' always showing ...
-
12:09 AM Bug #715 (New): RRD Graph on Throughput Contains No Info
- Oh the throughput graph on System tab, I read it as the graphs on the Traffic tab.
-
10:08 AM Revision d6d50244: Fixes #764. Import the patch in the ticket to allow per-host netboot file on dhcpd settings.
-
09:16 AM Revision 3a90c973: Tiny change to boot message to remove redundant info and make it pretty.
-
08:55 AM Revision 5f0b6a8f: Remove redundant call to system_dhcpleases_configure. It is called in services_dnsmasq_configure.
-
08:38 AM Revision 15d456b9: Fix declaration. Change 'global $configure' to 'global $config' to
- make function work.
Also, remove reference to $syscfg variable not declared in new
system_dhcpleases_configure. -
08:26 AM Feature #842 (Rejected): Flush DNS cache button
- Status > Services, just click the button to restart dnsmasq.
It's in the FAQ as such, too. -
05:24 AM Feature #842 (Rejected): Flush DNS cache button
- Sometimes it is useful to manually flush the dnsmasq DNS cache to help debugging DNS issues. This can be done with <p...
-
07:45 AM Bug #841: hostapd doesn't work with spoofed MAC (but should be able to)
- It seems it actually can create a clone with a different bssid if you specify a value for wlanaddr when you create it...
-
05:03 AM Bug #841 (Feedback): hostapd doesn't work with spoofed MAC (but should be able to)
-
04:57 AM Bug #841: hostapd doesn't work with spoofed MAC (but should be able to)
- From ifconfig code:...
-
07:32 AM Bug #843 (Resolved): Interface controls coupling unexpectedly
- I have an ALIX board running a single ADSL/PPPoE link for the WAN on vr2.
I also have DHCP set up on vr2 (via OP... -
05:24 AM Revision 2103b252: Skip the placeholder databases when outbound is selected, too. Also don't check the name against the gateway list on anything but the quality tab.
-
05:13 AM Feature #8: Clear states after failover
- Thank you for the support on this.
If you confirm it works as expected we can close this. -
03:13 AM Feature #8: Clear states after failover
- Almost works, 2nd arg is set correctly with gw ip now, but local ip is missing now.
Line 163 filter.inc... -
04:50 AM Revision 44aef543: See if the name matches a gateway instead of showing everything ending in -quality. Also do a more restrictive match when checking which graph to display, so it doesn't match ones it shouldn't. (for example, WAN matching both WAN and GW_WAN)
-
04:15 AM Todo #764: Patch: Add per-host netboot filename to DHCP static mappings
- Applied in changeset commit:"d6d50244df14c43832cca5199b04e659557c20dd".
-
04:15 AM Todo #764 (Feedback): Patch: Add per-host netboot filename to DHCP static mappings
- Committed.
Thank you. -
03:11 AM Revision 9cd5e6f5: Allow System: Throughput RRD graph to be displayed. Ticket #715
-
01:51 AM Revision 85a4aab6: Fix showing the current graph selection on the system RRD graphs.
08/23/2010
-
11:27 PM Bug #715: RRD Graph on Throughput Contains No Info
- I'm referring to the System: Throughput graph specifically and no other, and I'm fairly sure this was posted only abo...
-
11:26 PM Bug #715 (Feedback): RRD Graph on Throughput Contains No Info
- Definitely hasn't been that way for a year and a half. All of our production 2.0 installs only stopped working when a...
-
11:18 PM Bug #715: RRD Graph on Throughput Contains No Info
- This is actually a legitimate issue. I've traced the code and found why it does this. As far as I can tell, it has ...
-
10:28 PM Bug #715: RRD Graph on Throughput Contains No Info
- none of the graphs currently contain any info, that's a new issue that has another ticket open on it.
-
09:31 AM Bug #715: RRD Graph on Throughput Contains No Info
- What more info can I provide? I'm now running "2.0-BETA4 (i386) built on Mon Aug 23 05:05:44 EDT 2010" and it's still...
-
10:27 PM Bug #835: Captive portal non redirecting correctly when logout popup is enabled
- This sounds like something Jim fixed recently if I recall, if the logout pop up was enabled it wouldn't use the redir...
-
09:41 AM Bug #835: Captive portal non redirecting correctly when logout popup is enabled
- Please post more info to investigate this.
-
09:20 PM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- Hi Ermal, I tried testing it, but could not get it to work.
My WAN is configured as PPPoE to begin with:
- I g... - 09:11 PM Revision 59218e22: Do not use APC on cli
-
08:47 PM Revision de47ce7c: Fix order of tabs in this file.
-
08:31 PM Revision 58ed1013: Fix logic operator for graph endpoint
-
06:23 PM Revision 8fd0badd: Ticket #482. This solves point 3) which converts the custom 'local IP' directive to the 2.0 format.
-
06:15 PM Revision 4f1ebacb: Ticket #769. Convert assigned openvpn interfaces by using custom options to 2.0 style assigned openvpn interfaces. This upgrade removes the 'dev tun#' from cutom options and upgrades the assigned interface name to new style.
-
06:11 PM Bug #841: hostapd doesn't work with spoofed MAC (but should be able to)
- The code responsible for this is in the function eth_get in usr.sbin/wpa/l2_packet.c of the FreeBSD source code. It ...
-
05:58 PM Bug #841 (Resolved): hostapd doesn't work with spoofed MAC (but should be able to)
- When using hostapd, on hostapd startup it reads the wrong type of MAC, causing authentication of clients to fail if u...
-
04:33 PM Revision eed02caf: Ticket #8. A try at correctly finding the gateway ip of down interfaces or gateways marked as down. Currently it cannot be gotten from apinger.
-
03:52 PM Revision b439dc01: Pass the new argumesnts to pfctl -b and correct variable name as reported on Ticket #8.
- 03:50 PM Revision 02226b92: Merge remote branch 'mainline/master' into inc
- Conflicts:
etc/inc/config.lib.inc - 03:43 PM Revision 25a2bf77: nuke trailing c/r
-
03:05 PM Revision 228aec46: On ppp type interfaces down event signal for resolv.conf to be generated to have the latest dns servers. Ticket #838.
-
03:00 PM Revision ef13b720: Give +x to the script. Part of Ticket #838.
-
02:59 PM Revision f0e58f4c: Add a script to rewrite the resolv.conf file for dns configuration. This is one part of Ticket #838 to allow sending an event for rewriting resolv.conf on down event from ppp type interfaces.
-
02:47 PM Revision 24d619f5: Fixes #837. Fix the startup of dhcpleases during bootup. Also start the dhcpd service earlier there is not reason no to!
-
02:30 PM Revision 5b40ab9f: Add run(4) to known wireless nics. Reported-by: http://forum.pfsense.org/index.php/topic,27744.0.html
-
02:24 PM Bug #482 (Feedback): OpenVPN config upgrade problems
- Everything specified here should be fixed now.
-
02:16 PM Bug #769 (Feedback): OpenVPN interface assignment on upgrade
-
01:11 PM Revision 8c62fa48: Add bwn to interface lists too.
-
12:43 PM Bug #836: Captive portal logout popup windows doesn't disconnect the user
- I try to be more clear.
in PFsense captive portal configuration page there is a flag that says "enable logout popu... -
09:39 AM Bug #836: Captive portal logout popup windows doesn't disconnect the user
- Can you please give proper information about this!
Otherwise this will be closed. -
12:34 PM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- Corrected. Thx.
-
12:17 PM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- Mmm. Yes, I see I missed that detail. :)
It doesn't look like it's going to work.
Patch: (rc.rc.resolv_conf_g... -
11:29 AM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- There is not yet a new snapshot that includes the rebuilt check_reload_status that can handle this. It's building now...
-
11:23 AM Bug #838: DNS servers are not cleared from resolv.conf when link comes down
- The file gets generated (/tmp/resolv_conf_generate) but /usr/local/sbin/check_reload_status doesn't know how to handl...
-
09:10 AM Bug #838 (Feedback): DNS servers are not cleared from resolv.conf when link comes down
-
12:27 PM Bug #837: dhcpleases still not starting at boot time
- I've updated my testing box with these changes, and I still don't see dhcpleases starting. There's no error now, so t...
-
08:55 AM Bug #837 (Feedback): dhcpleases still not starting at boot time
- Applied in changeset commit:"24d619f5b696914e6b793bbf3c84b25131066b7b".
-
10:41 AM Feature #8: Clear states after failover
- Try latest snapshot or commits related to this.
they should get the proper ips to pass to pfctl though i plan to imp... -
05:00 AM Feature #8: Clear states after failover
- Im happy to report we are close to solving this issue!
Manually executing:
pfctl -b 192.168.102.2 -b 192.168.102.... - 01:45 AM Revision 7030262c: Take into account capital letters in the module name such as S in pfSense
- 01:36 AM Revision 90108d90: Fix a rather annoying bug where case would cause a module to not be detected as being loaded such as SQLite
- 01:22 AM Revision 52e65de1: Adjust ordering a bit
-
12:47 AM Bug #840 (Resolved): RRD scripts not collecting new data into the RRD
- No new data is being collected into the round-robin database.
08/22/2010
- 10:17 PM Revision 0bf80970: Load spl
- 10:12 PM Revision bdf6ac75: Include sqlite and pdo. See http://www.pingle.org/2007/09/22/php-crashes-extensions-workaround which I have no desire to add intelligdent to php_ini_setup. Overhead is negligible
- 06:47 PM Revision b83aad6e: Do not output duplicate done
-
04:24 PM Revision 298d49f6: Make the note more coherent.
-
03:49 PM Revision 515c6799: Remove duplicate logic.
-
03:40 PM Bug #839 (Resolved): Need patches from PR 149185 and 144642
- http://www.freebsd.org/cgi/query-pr.cgi?pr=149185
-
03:30 PM Revision 03184eda: Oops. Don't clobber the provider data if the user enters one.
- And add data validation so user can't set Service name and NULL service
name at the same time. -
03:15 PM Revision c6667396: Add a checkbox to explicitly configure a null Service name for PPPoE.
- See: http://forum.pfsense.org/index.php/topic,27461.0.html
-
02:24 PM Bug #830: Service provider information should be saved
- #1 is a common problem in the GUI, almost 15-20 pages have the issue and two of those files are pkg_edit.php and wiza...
-
01:32 PM Bug #830: Service provider information should be saved
- I tried and tried to figure out what was causing #1 but never could find it. :(
I'll work on #2.
-
01:28 PM Bug #838 (Resolved): DNS servers are not cleared from resolv.conf when link comes down
- When bringing down PPP,PPPoE,PPTP,L2TP we don't clear the DNS server IPs associated with those links from the /var/et...
-
01:22 PM Bug #837 (Resolved): dhcpleases still not starting at boot time
- We have a problem with the order of operations in the rc.bootup script
with respect to getting the dhcpleases progra... -
01:30 AM Revision beeafd46: Don't try to configure (or unconfigure) static arp on an interface if the physical interface is blank/empty.
08/21/2010
-
09:34 PM Bug #831: Status -> System logs - > DHCP bug
- Try this change to see if it clears up the static arp error:
https://rcs.pfsense.org/projects/pfsense/repos/mainline... -
09:22 PM Bug #831: Status -> System logs - > DHCP bug
- Tried it myself with -HUP and the DHCP daemon just died, so that won't work. The clear_log_file() function already ki...
-
08:51 AM Bug #831: Status -> System logs - > DHCP bug
- i get this is system log, no idea if its normal or no
Aug 21 16:50:48 php: /diag_logs_dhcp.php: The command '/sbi... -
07:49 AM Bug #831: Status -> System logs - > DHCP bug
- Then do a little more testing and research to find out. Since you can easily replicate the issue, you can see the log...
-
12:47 AM Bug #831: Status -> System logs - > DHCP bug
- isnt this wrong to start dhcp daemon again in order to clear log, then u might as well just name the button restart d...
- 08:16 PM Revision 95249b8a: use / as relative since items might be living in a subdirectory off of / such as pfCenter/
-
12:36 PM Bug #836 (Resolved): Captive portal logout popup windows doesn't disconnect the user
- When a user clicks on the logout button,the user is not actually disconnected and can still surf the web
-
12:34 PM Bug #835 (Resolved): Captive portal non redirecting correctly when logout popup is enabled
- If the captive portal option for the logout popup is enabled when the users logs in he's not redirected to the typed ...
-
12:20 PM Bug #834 (Resolved): DHCP server options for TFTP server doesn't allow arbitrary strings
- To configure Polycom SIP phones to find their configurations, you need to be able to specify a value for option 66 or...
-
08:48 AM Bug #684: interface status, disconenct button doesnt work
- im on the 21st snap and still after clicking disconnect, the page just keeps showing loading whereas the pppoe is alr...
- 01:15 AM Revision 7a14caf0: Fix tab (whitespace)
08/20/2010
-
07:30 PM Revision 8e23b225: Ticket #682. Use pfSense modules function to collect interface stats.
-
06:37 PM Revision bd961c65: Fixes #831. Restart the DHCP daemon when clearing the log file.
-
06:13 PM Revision d80a71d9: Actually make this not error out.
-
06:13 PM Revision eff77cb7: Fix this test, allows proper selection of CA in OpenVPN wizard.
-
05:43 PM Bug #833 (Resolved): route-to for firewall-initiated traffic stops functioning when default gateway unreachable
- opening to track issue we discussed earlier. Where WAN is an Ethernet interface, and OPT1/WAN2 is PPP, when WAN has n...
-
04:21 PM Revision 2de2abe0: No need to triger a vips re-configure explicitly but rather detect this during config merges. This is the best way to do this after fixing Ticket #601.
-
03:48 PM Revision d09d53ac: When booting up do not try to configure ovpn[c|s] interfaces if present also try to configure openvpn eariler just after the interfaces have been setup.
-
03:30 PM Bug #682 (Feedback): WAN traffic graph is broken with MLPPP
-
02:40 PM Bug #831 (Feedback): Status -> System logs - > DHCP bug
- Applied in changeset commit:"bd961c65906fe2f2c6aec4324dc3268d31aab1b7".
-
11:12 AM Bug #831: Status -> System logs - > DHCP bug
- tried that and after restarting dhcp daemon, logging resumes as normal.
-
11:11 AM Bug #831: Status -> System logs - > DHCP bug
- haven't tried that but ill do that and report back
-
10:48 AM Bug #831: Status -> System logs - > DHCP bug
- If you restart the DHCP daemon from Status > Services, does the logging resume? What about pressing "Save" on the Sys...
-
05:53 AM Bug #831: Status -> System logs - > DHCP bug
- basically what im trying to say is when pfsense is booted fresh and then u go to dhcp log and u can see entries in it...
-
05:50 AM Bug #831: Status -> System logs - > DHCP bug
- $ ls /var/log
apinger.log
dhcpd.log
dmesg.boot
filter.log
ipsec.log
l2tp.log
lastlog
lighttpd.error.log
ligh... -
05:45 AM Bug #831: Status -> System logs - > DHCP bug
- I cannot see anything wrong in code regarding specifics to dhcp!
Can you please show the output of ls /var/log
and a... -
02:11 AM Bug #831 (Resolved): Status -> System logs - > DHCP bug
- usually under system log, all the different tabs show the log, now under each is a clear log button on clicking which...
- 01:23 PM Revision a8cc4ac7: Fix gettext on filter.inc
- 01:04 PM Revision d23525a0: Merge remote branch 'mainline/master' into inc
-
01:04 PM Revision 19b5c3e7: Ticket #601. If 'virtualip' section is going to be restored or merged through xmlrpc bring down all vips which will be brough up later on from the configure_carp call. This ensures that the peers on the cluster stay current to each other.
-
12:54 PM Revision 68e1bc0f: Not neccessary to call this here since vips_configure does this automatically.
- 12:41 PM Revision 18efed8b: Fix gettext on shaper.inc
-
12:33 PM Revision dea80743: Ticket #684. Dispatch the reloading of the interface in dial-on-demand case to easy the GUI responsivess.
-
12:18 PM Revision 88c00a65: Ticket #829. Do not allow an interface to switch back to static/dhcp/none if it is configured as ppp/pppoe/pptp. for now just blacklist this option because it is not so trivial to fix.
-
12:04 PM Revision 79851fc8: Small optimization.
-
12:03 PM Revision fe24301f: Gett full list of interfaces when verifying description.
-
11:37 AM Revision 667b2b60: Remove \r from this file usually crated when edited by Windows editors because it makes it unreadble in unix editors.
-
09:10 AM Bug #832: Diagnostics: Show Bogons was broken layout!
- It works in IE 8, and all versions of Firefox, Chome, Safari and Opera. (read: IE7 is broken)
Not sure we'll fix t... -
08:43 AM Bug #832 (Closed): Diagnostics: Show Bogons was broken layout!
- Pfsense version:
2.0-BETA4 (i386)
built on Thu Aug 19 21:03:03 EDT 2010 (FreeBSD 8.1-RELEASE )
Option "Show Bogon... -
07:11 AM Bug #601 (Feedback): VHID changes do not apply immediately on secondary
- I implemented the fix for this.
Though i think it is better to put even the reloading of carps through rpcxml in the... -
06:39 AM Bug #684: interface status, disconenct button doesnt work
- The GUI should respond now properly with the latest snapshot.
-
04:53 AM Bug #684: interface status, disconenct button doesnt work
- now atleast with dial on demand ticked, the pppoe is disconnected and reconnected and receives new ip from isp but th...
-
06:24 AM Bug #829 (Feedback): WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- I investigated this and for now i just put a warning message there to tell you that you have to reassign the interfac...
-
12:45 AM Bug #830 (Closed): Service provider information should be saved
- Previously configured Service Provider information is not displayed when an interface configuration is edited after s...
- 12:32 AM Revision 1b666ae2: Default to 2 max procs
08/19/2010
-
09:39 PM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- file 1 - PPPoE config
file 2 - WAN changed from PPPoE to static
file 3 - static config after I manually changed WAN... -
09:32 PM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- I just reproduced it on VM running 'Aug 18 21:58:53 EDT 2010 ' snappy.
3 files attached:
-
08:12 PM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- PPPoE was configured on the Interface->wan page by selecting type = pppoe. I will try to reproduce it on a VM box and...
-
06:11 AM Bug #829: WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- Can you please provide more details on this.
If possible the config.xml file before and after the issues shows.
T... -
08:43 PM Revision fa2f5379: Ticket #8. Actually use the new functionality of pfctl -b to kill even states referencing down gateways in their route-to cached parameter.
- 08:34 PM Revision 5180d00a: Use params array
- 08:17 PM Revision bc87e826: No need to include xmlrpc.inc
- 08:16 PM Revision 4614d447: Turn off debugging
- 08:15 PM Revision 1518d578: ZeroMQ is now working!
- 08:02 PM Revision 94258864: Fix gettext on xmlrpc_client.inc
-
07:46 PM Revision d56bce18: Remove not existing function reference. Pointy-hat: myself
- 07:23 PM Revision 561130e4: Fix gettext on vpn.inc
- 07:06 PM Revision ed462aae: Fix gettext on voucher.inc
-
06:35 PM Revision f64e8f99: Include myself in the copyrights i have changed this files more than enough.
-
06:32 PM Revision 2f06cc3f: Make dhcrelay GUI be simple and easy to use by collapsing the interface tabs to a multiselect control. Remove proxydhcp option because it is broken and is not trivial to make it usable(if user request for it a reconsideration will be made). Allow multiple server ips on the server input box separated by commas. Also on the interface list do not show interfaces without an ip because dhcrelay will not be happy with them. Upgrade code is also included in this commit.
-
05:44 PM Revision 1e1dd1f5: Ticket #725. Add checking the routing table as a last resort to find the correct interface before falling back to the default one.
-
04:47 PM Feature #8: Clear states after failover
- Ok got a deal at it with your help.
We have to kill states of the form 'icmp 74.125.95.93:63260 <- 10.10.10.144 0:0'... -
09:35 AM Feature #8: Clear states after failover
- Tried the extra state kills on the CLI since snapshot hasn't been updated yet:
Still doesnt do enough, for the p... -
06:03 AM Feature #8: Clear states after failover
- Try latest snapshots more state killing added.
- 04:26 PM Revision 2445e851: Misc fixes
-
03:29 PM Revision 003f291a: Ticket #684. Actually when reconfiguring an interface send the destory flag to avoid a loop with ppp-on-demand.
-
02:36 PM Feature #810 (Feedback): Allow multiple servers for DHCP relay
- This is now implemented in latest snapshots.
- 01:59 PM Revision 32296995: Fix gettext on upgrade_config.inc
-
12:46 PM Revision 7d6128e0: Fix comment to match what is actually doing.
-
12:45 PM Revision 9a4c3eed: Setup polling per interface rather only at bootup. This is a proper fix and a optimization on large interface cases. Also setup_microcode and polling defaults before configuring interfaces.
-
11:58 AM Revision 7b877108: Ticket #8. Try to kill even all states from hosts and destination the gateway ip.
-
11:55 AM Revision 1bb03150: Ticket #8. Try to kill all states regarding source nodes and states with source address the gateway ip.
-
11:54 AM Bug #725 (Feedback): DHCP Relay missing logic for dynamic routes
- Check out with latest snapshot.
We now check the routing table too. -
10:33 AM Revision cd95b46e: Add/Update copyrights where applicable. Mark copyright on XML as CDATA to aviod any issues that might happen.
-
09:35 AM Bug #684: interface status, disconenct button doesnt work
- Latest snapshot should be ok, i found where the loop was occuring.
-
03:28 AM Revision 2ee08031: Prevent a warning that would appear when modifying privileges of an empty group.
08/18/2010
-
11:55 PM Bug #829 (Resolved): WAN stays assigned to pppoe0 interface after switching type from PPPoE to Static
- To reproduce:
- configure WAN as PPPoE
- switch WAN from PPPoE to Static
- go to 'Interface Assignments' page a... -
10:26 PM Revision d0fee737: These needs to be exit. Fix some whitespace too.
-
10:22 PM Revision 6debb140: Resolves #713. Take in conisderation the suggestion of not setting m1 parameter to 0b.
-
10:11 PM Revision 751dd5b3: Keep the list of different applications port numbers on a single file to easy its maintainance and sharing.
-
09:54 PM Revision 909f991b: Whitespace changes.
-
09:53 PM Revision c60e4f61: Also do the wizard optimizations and user-friendliness to the traffic_shaper_wizard_multi_all.xml
-
09:17 PM Revision 89c95943: Also do the wizard optimizations and user-friendliness to the traffic_shaper_wizard_dedicated.xml
-
08:18 PM Revision 849ea663: Also do the wizard optimizations and user-friendliness to the traffic_shaper_wizard.xml
-
07:28 PM Revision 94017670: Resolves #732. Make the wizard behave better and _actually_ work by correcting typos in code. Make it faster by not using HTTP redirection for showing errors. Try to make it more user friendly, though some more work is needed.
- 07:08 PM Revision 6ac0439b: Implement gettext() calls on voucher.inc
- 06:49 PM Revision 89ceb4ba: Implement gettext() calls on vpn.inc
-
06:25 PM Bug #713 (Feedback): Shaper Wizard: When backlogged, high priority queues get zero bandwidth
- Applied in changeset commit:"6debb14077a5963aeab60fa9f8fcc87bdc806740".
-
05:56 PM Bug #302 (Feedback): Shaper wizard remembers values on error, but are disabled
- Try latest snapshot should be ok.
-
05:30 PM Feature #828 (Resolved): Import for User Certificates
- We currently only have a way to generate a new user certificate, it would also be helpful to import existing user cer...
-
05:24 PM Feature #827 (Closed): CSR for User Certificates
- Eventually (post 2.0) it would be nice to have a way to generate a CSR for a user cert, so user certs can be supporte...
- 05:13 PM Revision 29c508f7: Merge remote branch 'mainline/master' into inc
- Conflicts:
etc/inc/interfaces.inc - 05:08 PM Revision fd7b47b6: Implement gettext() calls on util.inc
-
03:57 PM Revision b0140675: Ticket #826. Add more bandage to notice when a reading on socket timeouts.
- 03:50 PM Revision 4d511e5b: Implement gettext calls on upgrade_config.inc
-
03:46 PM Revision 71ca2cb2: Ticket #826. Convert to unix domain sockets for management interface so we do not have problems when interface is any.
-
03:30 PM Bug #732 (Feedback): Shaper: Multip Lan wizard does not create lan connection queues
- Applied in changeset commit:"9401767007a1bf03f02129fbe2c0d9d4d3621524".
-
02:35 PM Revision 19e3d450: Ticket #826. Add timeout of 1 second for all read/write actions performed on the socket. This should fix point 1) on the ticket.
- 01:36 PM Revision dbaf21d4: Implement gettext() calls on shaper.inc
-
01:06 PM Bug #729: if_bridge unpredictable filter interface selection
- Yes, my bad. PHONE is bridged to WAN not LAN
-
09:04 AM Bug #729: if_bridge unpredictable filter interface selection
- A note on the last comment there:
From that config it looks like "Phones" is bridged to WAN, not LAN, which is more ... - 11:24 AM Revision 4b48d1b9: Implement gettext() calls on upgrade_config.inc
-
10:02 AM Bug #826 (Feedback): Status > OpenVPN hangs when using TCP w/OpenVPN Int. "any"
08/17/2010
-
09:59 PM Bug #729: if_bridge unpredictable filter interface selection
- Using pfSense-Full-Update-2.0-BETA4-20100808-1004.tgz I have a WAN and LAN and also a PHONE which is bridged to LAN. ...
- 09:55 PM Revision 3f797235: Echo out field if its set
- 09:53 PM Revision e18dcdc0: Include supportedbybsdperimeter field
- 09:32 PM Revision 5df6a315: Add Supported by BSD Perimter field
-
09:23 PM Revision f6f5fde1: Fixes #694. Actually if the vip interface changes take proper actions to clean up on the previous interface.
-
08:44 PM Revision cbe49517: Avoid a warning on this code when there is no member for a group.
-
08:42 PM Revision 51d5aad7: Fixes #88. Actually fix all the mess that was caused by setup_microcode() which overwrote the whole decisions being made on boot from other code. Solve this by moving the setting of all interface capabilities to interface_configure() and just leaving microcode setup to setup_microcode. Also optimize and make more readble the polling setup if activated/deactivated. This also fixes the ticket issue because the settings are now kept after booting up and not overwritten by other code.
- 08:23 PM Revision 4a896b86: Implement gettext() calls on system.inc
-
07:58 PM Revision 6991dcb1: Reshufling for better reading of code.
- 06:29 PM Revision 847673ae: Implement gettext() calls on smtp.inc
-
05:58 PM Bug #344 (Closed): Multiple P2s causes instability
- not an issue now that we've backed down to 0.7.3
-
05:38 PM Revision 07676e36: Ticket #88. When creating the bridge find the common flags needed related to rxcsum/txcsum so that the bridge actually works.
- 05:36 PM Revision 0b899307: Implement gettext() calls on service-utils.inc
-
05:25 PM Bug #694 (Feedback): Change interface with virtual IPs
- Applied in changeset commit:"f6f5fde13718e29670783173e99b2f3707614151".
- 05:17 PM Revision 5cfa35df: Fix syntax
- 05:15 PM Revision a57b6d57: Merge remote branch 'mainline/master' into inc
-
05:00 PM Revision 15c5b5d6: Fix ajax updating of fields when the CPU graph widget is not in use.
- 04:55 PM Revision f1a44a3a: Implement gettext() calls on services.inc
-
04:45 PM Bug #88 (Feedback): TXCSUM forced on at boot which breaks wireless bridging
- Applied in changeset commit:"51d5aad75a0a88034b49db3d867e8a1e49fe2f12".
- 04:40 PM Revision b53f56d9: Implement gettext() calls on xmlrpc_server.inc
-
04:14 PM Revision a0bd3417: Do not show the empty part of the graph by request of many
- 03:54 PM Revision 9eda6186: Implement gettext() calls on rrd.inc
- 03:48 PM Revision 069503a1: Implement gettext() calls on xmlrpc_client.php
- 03:27 PM Revision 93fd3db8: Implement gettext() calls on radius.inc
- 01:55 PM Revision 4d814149: Implement gettext() calls on priv.defs.inc
-
01:42 PM Bug #758 (Feedback): sshlockout_pf doesn't work on 64 bit
- Partially simpler patch committed to the port.
Try snapshots newer than this post. - 12:36 PM Revision 61349b3f: Implement gettext() on xmlreader.inc
- 12:34 PM Revision ada992bd: Implement gettext() calls on xmlparse.inc
- 12:27 PM Revision f55943aa: Implement gettext() calls on xmlparse_attr.inc
- 11:38 AM Revision 6acdf659: Implement gettext() calls on pkg-utils.inc
-
10:15 AM Revision 17649c87: No functional change just code reshuffle.
-
06:20 AM Feature #8: Clear states after failover
- This command seems to be giving no output at all, whether I run it before or after the pfctl -b.
-
05:45 AM Feature #8: Clear states after failover
- Actually no, pfctl is killing the right states. That is all it has to kill.
Can you please show me the src nodes sta...
08/16/2010
-
09:54 PM Revision a87c7901: Update gateway status properly when fetched via AJAX.
- 09:25 PM Revision 7d1b238c: Implement gettext() calls on pfsense-utils.inc
- 08:44 PM Revision 62bf5cd0: Fix some syntax errors
- 08:43 PM Revision 487415e8: Implement gettext() calls on PEAR.inc
-
08:42 PM Revision 41be629f: Print a notice that OpenVPN status information is not available for shared key servers.
- 08:27 PM Revision 4aa02281: Implement gettext() calls on openvpn.inc
-
08:19 PM Revision 036371d2: Capitalize
-
08:16 PM Revision 31b85492: Remove these three bullet points that don't seem to make any sense on their own.
- 08:14 PM Revision 5025dfe3: Implement gettext() calls on notices.inc
-
07:54 PM Revision 1f9921aa: Also show the save button if we have just performed an action.
-
07:52 PM Revision 32600a96: Do not escape this $
- 07:51 PM Revision 930fc5ad: Implement gettext() calls on meta.inc
-
07:37 PM Revision a8abc4b3: End processing when we receive an ERROR line. Part of ticket #826
- 07:36 PM Revision a0353193: Merge remote branch 'mainline/master' into inc
- 07:29 PM Revision b1fd7536: Implement gettext() calls on ipsec.inc
- 07:06 PM Revision c3d32df4: Implement gettext() calls on filter.inc
- 06:41 PM Revision 07e40c1f: Implement gettext() calls on interfaces.inc
- 03:53 PM Revision 5c7296d2: Implement gettext() calls on gwlb.inc
-
03:39 PM Bug #826: Status > OpenVPN hangs when using TCP w/OpenVPN Int. "any"
- The binding seems to be correct, but the status connection wasn't being parsed properly.
The status command to th... -
03:45 AM Bug #826 (Resolved): Status > OpenVPN hangs when using TCP w/OpenVPN Int. "any"
- When using TCP with OpenVPN, even where specifying 'local' to bind to a specific IP, the server binds itself to 127.0...
-
03:00 PM Bug #825 (Closed): OpenVPN "WAN" selection missing listen directive
- it does have 'local' correctly where WAN is selected
-
03:42 AM Bug #825 (Closed): OpenVPN "WAN" selection missing listen directive
- When "WAN" is specified as the interface in an OpenVPN configuration, it does not include the listen on the WAN IP, i...
- 02:34 PM Revision 666d84c1: Fix typo
- 02:31 PM Revision e929c925: Adding zmq
- 01:56 PM Revision 8abd095a: Implement gettext() calls on filter_log.inc
-
01:53 PM Revision 67299a3f: There is no need to clear this anymore.
- 01:36 PM Revision 4e038d31: Implement gettext() calls on config.lib.inc
- 01:21 PM Revision 5bd033a0: Implement gettext() calls on easyrule.inc
- 12:54 PM Revision 10e91486: Implement gettext() calls on config.inc
- 12:36 PM Revision 814f9e64: Implement gettext() calls on config.console.inc
-
12:18 PM Revision ef26b049: Fixes #823. Do not reload all interfaces, there is already code to do this for changed interfaces.
- 12:13 PM Revision 0f8ae709: Merge remote branch 'mainline/master' into inc
- 11:40 AM Revision e96d2182: Implement gettext() calls on cmd_chain.inc
-
11:23 AM Revision 7e627719: Also mark wlan cloned interfaces as altq capable.
-
11:21 AM Revision febca7e8: Add l2tp where missing. Also add l2tp and igb to altq capable interfaces.
-
10:37 AM Bug #781: Entering sim code problem on a Huawei E1752
- Can you please show your ppp log on this?
Or the mpd log on system log?
You can otherwise use the init script box on... -
06:25 AM Bug #823 (Feedback): Adding an interface drops connectivity
- Applied in changeset commit:"ef26b049dbedc8ad9f88496ed9580882e3814c14".
-
06:01 AM Feature #8: Clear states after failover
- Should have been "pfctl -k ip1 -k ip2" in my last comment.
-
05:57 AM Feature #8: Clear states after failover
- Updated to 2.0-BETA4 (i386) built on Sun Aug 15 18:27:24 EDT 2010
Gateway applet working again and the rules.debug ...
08/15/2010
- 10:42 PM Revision 052e65ef: Adapt to use 2.0's accounts
- 10:17 PM Revision 5da3430e: Adding initial xmlrpc -> zeromq conversion
-
10:07 PM Revision 7b8db0c3: Fix alignment of save and cancel buttons on interfaces.php.
- 09:42 PM Revision 1600b1af: Revert "Stick save and cancel back into the right hand of the first td cell like all other forms have it."
- This reverts commit 787e94645b722b3b3c7f99480a7b71c20f083396.
- 07:55 PM Revision 466a8875: Do not set legacy for now
- 07:44 PM Revision 87e68403: Do not issue legacy command for time being until a strange error can be tracked down. The ZFS install works OK without it
- 06:54 PM Revision dc3e6dea: Unbreak An error occurred
- 06:19 PM Revision 2940856d: These are not needed and ends up creating an error. Remove for time beeing
- 06:12 PM Revision 6bc46900: Only do check on pfSense platform
- 06:11 PM Revision 8a8f51b7: Only process items if we can find grep
- 06:02 PM Revision 87db1017: Handle ZFS root partition read-only cases
-
05:44 PM Bug #822 (Resolved): cannot save after disabling interface on interfaces.php
-
03:27 PM Bug #824 (Closed): dnswatch not working
- Oh, thanks. It was in the wrong project (don't open tickets in tools) so a ticket I never saw. added info there and c...
-
02:38 PM Bug #824: dnswatch not working
- Chris - is this not related to the issue I logged (#755). It appears as though the same symptoms are exhibited (segfa...
-
12:04 AM Bug #824 (Closed): dnswatch not working
- dnswatch crashes immediately upon running.
kernel: pid 45001 (dnswatch), uid 0: exited on signal 11 (core dumped... -
03:25 PM Bug #755 (New): dnswatch not working
- dnswatch crashes immediately upon running....
- 07:13 AM Revision 9d869ea3: Fixed pattern matching for relayctl output (fixes vservers with spaces in name)
-
04:48 AM Bug #781: Entering sim code problem on a Huawei E1752
- No, My guess is that SIM Pin doesn't run at the right time in the script.
- 03:21 AM Revision a83744b4: Correct diskX
- 02:50 AM Revision 81d22665: Set swap size correctly
- 02:35 AM Revision 2b69de49: Allow swap spaces and default to 200M
- 02:11 AM Revision 8548648e: Escape prototype dollarsign(
- 02:09 AM Revision 9fdc0560: Add back to webInstaller link
- 02:08 AM Revision c9079676: Do not set hostname
-
02:04 AM Bug #684: interface status, disconenct button doesnt work
- there is some correction
all above scenario work fine if dial on demand is disabled and dont work if its enabled. -
02:00 AM Bug #684: interface status, disconenct button doesnt work
- im on the latest snap and still issues with this, further testing results below:
1) on reboot pppoe conencts fine.... - 01:58 AM Revision 30b1013b: Correct path
- 01:56 AM Revision cf7cd237: Probe disk before creating ZFS easy install string
- 01:54 AM Revision 48f7f102: chmod a+rx
- 01:42 AM Revision c3af202c: Rename to webInstaller
- 01:38 AM Revision 083fbdd6: Use correct path
- 01:32 AM Revision 374379c6: Move ERROR down into main screen area
- 01:28 AM Revision 4ca6e245: Use pc-sysinstall subdir
- 01:28 AM Revision 369cc155: chmod a+rx
- 01:13 AM Revision f402729d: Do not setup unionfs for /PCBSD
- 01:12 AM Revision 5a69cb06: Sync pc-sysinstall with FreeBSD-CURRENT and remove old /PCBSD version. Change installer.php to match new path
- 01:00 AM Revision 3fcc3999: s/fade/Fade/
- 12:56 AM Revision 086b0a2f: Flush the buffer before probing
- 12:41 AM Revision 7e13820c: Note which disk we are installing to in easy mode
- 12:25 AM Revision f38e4f26: More ZFS cleanups
- 12:06 AM Revision 6e8e75b1: We need to move the mountpoint
08/14/2010
- 11:29 PM Revision 5e8aea0b: Misc changes to make ZFS installations work.
-
11:27 PM Bug #823 (Resolved): Adding an interface drops connectivity
- Adding an interface at Interface>assign and saving changes drops all the interfaces on the system for 6-8 seconds. So...
-
10:51 PM Bug #88 (New): TXCSUM forced on at boot which breaks wireless bridging
- no change
- 10:51 PM Revision e318ec08: Rename function to pcsysinstall_get_disk_info
- 09:40 PM Revision d7348f42: Do not set hostname
- 09:35 PM Revision 1af1b216: Do not fade item, simply hide it before the next option fades in
- 09:31 PM Revision fde4a93d: Do not use tabcont class
- 09:30 PM Revision 8965327c: Format options screen in a table
- 09:30 PM Revision 1fb1f3fe: Format options screen in a table
- 09:25 PM Revision e11d8f9c: Remove Rescue config option, that will be a console based function going forward
- 08:51 PM Revision 4c394c0f: Misc formatting
- 08:32 PM Revision 48ddd79f: Add Cancel and return to Dashboard
- 08:30 PM Revision 846631ac: Show disk description
- 08:28 PM Revision 5576ea3e: Show disk sizes. Add cancel button. Unbreak easy installation.
- 07:58 PM Revision 4f713e19: Remove duplicate form
- 07:56 PM Revision c2185286: Add XXX for rowhelper to allow multiple slices
- 07:54 PM Revision 779476f6: Add SUJ for 9.X
- 07:48 PM Revision 18a4c6c5: Add UFS+S (Soft-updates)
- 07:44 PM Revision f988d2d9: Adding custom installation mode. Verify before installation
- 07:38 PM Revision 9e4f5592: fix text
- 07:37 PM Revision 4f3147bc: fix text
- 07:35 PM Revision 9bca7494: fix text
- 06:37 PM Revision b385327a: show red X if IPsec is completely disabled
- 06:09 PM Revision e6a8a626: Made LB pool and server status pages somewhat more meaningful
-
03:38 PM Bug #781: Entering sim code problem on a Huawei E1752
- is the SIM PIN in the GUI not adequate for this?
-
03:31 PM Bug #655 (Resolved): Disabling IPsec does not flush SPDs
- fixed
-
03:30 PM Bug #756 (Resolved): package installer issues on nanobsd
-
03:30 PM Bug #819 (Resolved): Blank <vip/> tags appear in config.xml
-
03:29 PM Feature #814: GUI should allow to bind openvpn on different ip same port
- This is because the management interface relies on the same port as the server is listening on, which changing would ...
-
03:24 PM Bug #815 (Resolved): IPSEC VPN creation fails if LAN I/F has no IP address.
-
02:19 PM Bug #822 (Resolved): cannot save after disabling interface on interfaces.php
- after unchecking the "enable" box, the save button isn't available, so interfaces can't be disabled.
-
02:40 AM Bug #684: interface status, disconenct button doesnt work
- any1 else having this issue?
- 01:25 AM Revision 03e9ceab: Remove debugging
- 01:24 AM Revision 5cdb4299: Do not include empty items
- 01:19 AM Revision 63d7c442: Remove debugging output
- 01:19 AM Revision dd4be2d0: Add installer_find_all_disks() which probes disks and returns an array of all disk info
08/13/2010
-
09:42 PM Revision 120c21bd: Remove stray )
- 08:37 PM Revision 94933d56: Fixed host status bug - how did that get there??
- 08:05 PM Revision fdc55311: Implement gettext() calls on captiveportal.inc
- 07:23 PM Revision 94021404: Implement gettext() calls on auth.inc
- 06:44 PM Revision ae67b1fb: Move : inside gettext
-
06:20 PM Revision fe6d7a55: Fix typo
-
06:15 PM Revision a22d475f: Let the user choose the IPsec CA instead of assuming.
-
06:03 PM Revision dc291feb: Only write out the CA if one exists.
-
05:57 PM Revision 812dd35d: Add a GUI selection for the proposal_check config option. Provide all the choices from racoon.conf(5) plus a "default" which will keep the old behavior.
-
05:57 PM Revision 4ccea790: Flip this check
-
05:57 PM Revision 96ef83a7: When using a certificate for IPsec, also write out and reference the certificate's CA.
-
05:57 PM Revision 29a3ac40: Honor a phase 1 proposal_check if one is set, otherwise use the default.
- 05:46 PM Revision 5086278b: Merge remote branch 'mainline/master' into inc
- 05:43 PM Revision 0ac1dafd: Merge remote branch 'mainline/master' into js
- 05:31 PM Revision 6c83f226: Fix some javascripts broken on gettext() implementation
- 05:06 PM Revision 7d04e4ac: fix text
- 05:02 PM Revision 1f1fc944: fix text
- 04:58 PM Revision f1ca6b86: should be #777 not *777
- 04:52 PM Revision 0b70d9f4: Implement gettext() calls on authgui.inc
- 04:49 PM Revision d886ebd6: Shows source ports when they are already defined
- 04:32 PM Revision da003176: Implement gettext() calls on array_intersect_key.inc
-
02:54 PM Revision df309b37: If mpd.conf files exists in the /conf directory, link to it instead of
- generating a new one from config.xml data.
This allows power users to tweak mpd conf to their delight, and gives
dev... -
02:33 PM Revision 2f848ab7: Merge branch 'master' of rcs.pfsense.org:pfsense/mainline
-
02:32 PM Revision 6a30f701: Expose MRRU settings in the GUI for PPPoE (MLPPP).
- 02:08 PM Revision bfa790df: Merge remote branch 'mainline/master' into js
-
01:33 PM Revision 5f25bfea: Don't allow a user-entered PPTP password to start with !, this will cause mpd to attempt an external auth program.
- 01:30 PM Revision ec325889: Remove unnecessary JS variable
- 01:20 PM Revision 79671316: Fix the js that hides advanced button on firewall rules
- 11:58 AM Revision 7e2ca7b5: Fix a duplicate line forgotten on a merge
08/12/2010
-
10:03 PM Revision 0cd8ee5c: This needs to use gettext, since gettext is used on the value of the button.
-
10:02 PM Revision 3b7f0f53: Fix some printfs and some text.
-
09:51 PM Revision 0153a0b8: Merge branch 'master' from http://gitweb.pfsense.org/pfsense/pfsense-gettext.git
-
08:04 PM Revision a62ad193: Fix printf
-
05:33 PM Revision 9fad9848: Reorder this, otherwise the function doesn't pick up on the config change.
-
05:20 PM Revision 1b1c179d: Use require_once here
- 05:17 PM Revision c0948c6c: Just fix some space and tab problems
- 04:40 PM Revision 8cc2d7a6: gettext() fixes on interfaces_gif.php
- 04:26 PM Revision 8caea9a2: gettext() fixes on interfaces_bridge_edit.php
- 04:04 PM Revision 18fd37b6: Merge remote branch 'origin/master'
- 04:04 PM Revision 01b87f4b: Fix gettext on load_balancer_virtual_server_edit.php
- 04:00 PM Revision aee5ddac: gettext() fixes on interfaces_bridge.php
- 03:55 PM Revision e73b001e: Merge remote branch 'mainline/master'
- Conflicts:
usr/local/www/diag_smart.php
usr/local/www/firewall_rules_edit.php
usr/local/www/i... - 03:34 PM Revision 3e6ec5df: Use <?php instead of <?
- 03:34 PM Revision 86aa4cc7: Small logic fixes, gettext fixes and make php -l happy
-
03:15 PM Bug #789 (Closed): Bad racoon.conf generated.
- Duplicated by #789 but since that has a more accurate title and commits (and is already set to Feedback), this one ca...
-
02:27 PM Bug #758: sshlockout_pf doesn't work on 64 bit
- The attached patch fixes sshlockout_pf on amd64 (and includes an extra check for invalid logins on a normal FreeBSD i...
- 02:21 PM Revision c47e5d92: gettext fixes
- 02:19 PM Revision 717f87dd: Merge branch 'master' of rcs.pfsense.org:pfsense/pfsense-gettext
- 02:15 PM Revision ee9933b6: Use <?php instead of the short form
- 02:11 PM Revision eb9116e9: gettext() fixes on pkg_mgr_settings.php
- 02:08 PM Revision 4d71d68c: Make php -l happy renaming local function getHostName to _getHostName
- 02:07 PM Revision 8cb8751e: Use <?php instead of <?
- 02:04 PM Revision b11cdf92: Use <?php instead of the short form, use <?= and remove spaces and tabs from EOL
- 02:00 PM Revision 6f739927: gettext() fixes on load_balancer_pool_edit.php
- 01:58 PM Revision e242f36a: Make php -l happier
- 01:54 PM Revision 31c78e5d: Add missing )
- 01:52 PM Revision e4b57d26: Use <?php instead of the short form
- 01:49 PM Revision 933ea015: gettext() fixes on interfaces.php
- 01:46 PM Revision 185b9fbd: Add missing )
-
01:43 PM Bug #655 (Feedback): Disabling IPsec does not flush SPDs
- Should be fixed by:
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/9fad9848c9353b9a21402634a537ae... - 01:40 PM Revision c1d85ee1: Fix gettext on interfaces_vlan.php
- 01:37 PM Revision ad157b4c: Fix gettext on interfaces_qinq.php
- 01:32 PM Revision 16457bdd: gettext fixes
- 01:30 PM Revision 82a1d978: Fix gettext on interfaces_ppps_edit.php
- 01:23 PM Revision 0952c85b: Fix gettext on interfaces_lagg.php
- 01:20 PM Revision 73280f1a: Fix gettext on interfaces_groups.php
- 01:17 PM Revision 49f1f471: Fix gettext on interfaces_gre.php
- 01:14 PM Revision ef8b7960: Fix gettext on interfaces_gif.php
- 01:12 PM Revision 8c287f1b: Fix gettext on interfaces_bridge_edit.php
- 01:09 PM Revision 6a3b2a38: Merge remote branch 'origin/master'
- 01:07 PM Revision ced6a9b5: Fix gettext on interfaces_bridge.php
-
01:05 PM Revision 3e4f5a33: Protect against PHP errors if the interface list is empty
- 12:44 PM Revision ea53e38f: gettext fixes
- 12:36 PM Revision a236afee: Fix gettext on firewall_virtual_ip_edit.php
- 12:35 PM Revision f8c0efc9: Fix gettext on firewall_virtual_ip.php
- 12:34 PM Revision 41f75af9: Fix gettext on firewall_schedule.php
- 12:32 PM Revision 21600ab1: Fix gettext on firewall_rules_edit.php
- 12:31 PM Revision 12fbd75b: gettext() fixes on firewall_nat_out_edit.php
- 12:12 PM Revision 2ca03544: gettext() fixes on firewall_nat_out.php
- 11:59 AM Revision 39a3ce91: gettext() fixes on firewall_nat_edit.php
- 11:26 AM Revision 5336d152: gettext() fixes on firewall_nat_1to1.php
- 11:14 AM Revision 3931c643: gettext() fixes on firewall_aliases.php
-
10:23 AM Revision 8bb30d23: Fix the ID for the link to the associated filter rule when a filter rule has not been saved since the associated rule was created.
-
09:44 AM Revision 48a27d4f: Disable protocol box on associated rules, move the message, and clean up code a bit.
-
06:58 AM Revision 523082c6: Fix text
-
05:54 AM Revision f5abb47d: Fix link in error message for wake on lan.
-
05:35 AM Revision bcc8d8a3: Simplify sprintf
-
05:05 AM Bug #684: interface status, disconenct button doesnt work
- i got so frustrated with this issue that i did a clean install on another CF card and reconfigured it from scratch an...
-
03:53 AM Bug #684: interface status, disconenct button doesnt work
- after clicking disconnect, below r the details of system log and ppp log
system log shows
----------------
Aug 1... -
04:49 AM Revision 6073ef32: Fix text for a couple advanced options on filter rule list.
-
04:18 AM Revision ddc55e12: Modify various (s)printf format strings to allow translations to change the order of the inserted strings.
-
04:17 AM Revision e36c52f4: Remove or simplify some (s)printf calls.
-
12:46 AM Revision 4c807d76: Fix text
- 12:41 AM Revision a1cc442d: gettext() fixes on diag_traceroute.php
- 12:38 AM Revision ad57806b: gettext() fixes on diag_system_pftop.php
- 12:36 AM Revision 787e9464: Stick save and cancel back into the right hand of the first td cell like all other forms have it.
- 12:33 AM Revision fdbf9171: gettext() fixes on diag_showbogons.php
- 12:31 AM Revision 28a9f06f: gettext() fixes on diag_routes.php
- 12:28 AM Revision 519d52bb: gettext() fixes on diag_patterns.php
- 12:26 AM Revision 46d8071e: Hide Save button until a drop down onChange event occurs
-
12:21 AM Revision ea6be4a7: Remove extra quotes that were added around some strings when adding printf+gettext in some areas.
- 12:19 AM Revision 4a3c31d7: gettext() fixes on diag_packet_capture.php
08/11/2010
-
10:15 PM Revision 3a3fb8ea: Fix printf/sprintf mixups.
- 09:42 PM Revision e34f19ec: Made LB pool status page follow natural (expected) order no matter which host(s) is/are active.
-
08:53 PM Revision 24357d92: This doesn't really need a printf either, come to think of it.
-
08:53 PM Revision 5943a23f: This probably shouldn't be a printf anyhow
-
08:48 PM Revision ca5bb211: This should be sprintf
-
08:46 PM Revision 73eb4b90: Fix another gettext() call.
-
08:44 PM Revision baa59e4e: Fix gettext() call
-
08:40 PM Revision 54e73f5f: Show selected properly for the LB mode.
-
08:34 PM Revision 91a38e1f: Do not require a refernce passed because seems php likes to screw with it internally. This should have be the second belt at Ticket #819.
- 08:21 PM Revision ea62cd32: No need to set enable
-
08:13 PM Revision ac8c5e56: Do not try to bring down a CARP VIP for an entry that does not exist yet. Fixes #819
- 07:58 PM Revision 9f6bd43e: gettext() fixes on diag_overload_tables.php
- 07:54 PM Revision aaaf679f: gettext() fixes on diag_nanobsd.php
- 07:45 PM Revision 14d94ddc: Implement geettext() on diag_smart.php
- 07:15 PM Revision 33bf9e7b: gettext() fixes on diag_logs_filter_dynamic.php
- 07:04 PM Revision 35c7b0ce: gettext() fixes on diag_ipsec_spd.php
- 07:00 PM Revision f4713e57: gettext() fixes on diag_ipsec_sad.php
- 06:53 PM Revision 89a24955: gettext() fixes on diag_ipsec.php
- 06:49 PM Revision 673ee314: gettext() fixes on diag_dump_states.php
-
06:46 PM Revision 0c450e71: Allow batch Server LB/Failover pool changes from the Pool status screen. For LB pools, you can pick via checkbox any number of active pool servers. For manual failover types, you can choose the active server.
- 06:37 PM Revision ad3bca61: gettext() fixes on diag_defaults.php
- 06:27 PM Revision dae4c487: gettext() fixes on diag_backup.php
-
05:59 PM Revision 82d0dfb3: When adding to a pool in manual failover mode, enforce the one-active limit also.
- 05:44 PM Revision c9e7d30d: Add 8021.x preauth (rsn_preauth)
-
05:39 PM Revision 191b00d9: Rename $vipent to $pool here since we only deal with pools and the old name doesn't make sense in this context.
-
05:39 PM Revision 3b370abf: Change these PRINTs to echo for consistency, and reformat a little. Wrap vars inside strings in {}.
-
05:39 PM Revision beca7814: Formatting/whitespace fixes.
-
05:39 PM Revision 938bda3a: Remove the gateway load balancer status code, that has all moved away from here to Status > Gateways and is no longer needed.
-
05:39 PM Revision faf207f1: Add <form> tag, submit, and reset button here.
- 05:11 PM Revision 381af659: Small gettext() fixes
- 05:02 PM Revision 45a06eeb: Move : to gettext string
-
04:32 PM Revision 8ebbae22: Fixes #821. Force usage of configured redirurl when one has been configured.
-
04:20 PM Bug #819 (Feedback): Blank <vip/> tags appear in config.xml
- Applied in changeset commit:"ac8c5e564341279a3a82700ab6dc3ebd61ae52da".
-
02:21 PM Bug #819: Blank <vip/> tags appear in config.xml
- No, #152 was a xmlreader-specific issue. I should note this does the same thing with both parsers, so I don't think i...
-
09:59 AM Bug #819: Blank <vip/> tags appear in config.xml
- Hum.. Related to http://redmine.pfsense.org/issues/152 ?
-
01:14 AM Bug #819 (Resolved): Blank <vip/> tags appear in config.xml
- After adding a CARP VIP (at least, possibly others), you end up with a <vip/> or <vip></vip> tag above the configured...
-
03:15 PM Revision 2b3338f6: Show the architecture after the version number.
-
02:27 PM Bug #817 (Resolved): Policy filtering mark not saved
-
12:47 PM Bug #817: Policy filtering mark not saved
- Works with the the latest snapshot (2.0-BETA4 built on Wed Aug 11 06:12:55 EDT 201).
-
12:35 PM Bug #821 (Feedback): Captive Portal URL redirect macro is not correct when using a forced redirect
- Applied in changeset commit:"8ebbae22e08147c24da6c7cad6fcb9315eb1291f".
-
08:33 AM Bug #821 (Resolved): Captive Portal URL redirect macro is not correct when using a forced redirect
- When you have a forced redirect URL specified, the $PORTAL_REDIRURL$ macro still shows the URL the person attempted t...
-
11:51 AM Bug #684: interface status, disconenct button doesnt work
- config attached, kindly delete once u get a look at it.
how to get the logs once webgui freezes, i mean using ssh ... -
11:15 AM Bug #684: interface status, disconenct button doesnt work
- Can i have your config and the system logs after the webgui freezes?
-
10:51 AM Bug #684: interface status, disconenct button doesnt work
- still not solved, as a matter of fact its gone more worse. Now either if u got to the wan interface page and click sa...
-
11:51 AM Feature #818: TrafficShaping for variable bandwidth
- Perfect! Thanks. I didn't had a chance yet to look at a 2.0 snapshot. Good to know.
By the way:
I like the pfSens... -
02:05 AM Feature #818 (Closed): TrafficShaping for variable bandwidth
- Where your bandwidth is scheduled like that, in 2.0 you can use schedule rules to apply different QoS parameters depe...
-
12:40 AM Feature #818 (Closed): TrafficShaping for variable bandwidth
- At my clients places i am using pfSense 1.2.2 and 1.2.3 with multi-WAN/multi-LAN and its working fine so far.
The ... -
04:44 AM Feature #820 (Resolved): Expose interface for PF address pools on outbound NAT rules
- There are various scenarios where it would be useful to expose an interface on outbound NAT rules to use subnets or a...
-
04:06 AM Feature #8: Clear states after failover
- There is not yet a new enough build to have these latest changes. The next one may possibly have all the changes, bu...
-
03:59 AM Feature #8: Clear states after failover
- I have tested with latest snapshot built on Tue Aug 10 22:06:38 EDT 2010 which includes the change.
It seems failove...
08/10/2010
-
10:54 PM Revision c53220ef: Add quotes back that were incorrectly removed when implementing gettext and add php tags around gettext where needed.
-
10:19 PM Revision 7d0a71d4: Separate RRD graph settings to a separate entry.
-
09:55 PM Revision 4e76e030: Do not forget status_rrd_graph.php. Spotted-by: Effone
-
09:46 PM Revision 050f4830: Fixes #774. Add some pages to match under proper category.
-
09:42 PM Revision c5c4ae91: remove duplicated entry.
-
09:35 PM Revision 8d9cbe6f: Fixes #684. Test file existence before trying to kill the process. Also correct interface name passed as parameter to interface_configure function, it should fix another ticket as a byproduct.
-
09:14 PM Revision fd9ba7c0: Fixes #817. Tags/Marks can be used even outside floating rules.
-
08:49 PM Revision 79b7f498: Ticket #8. Use proper IP to pfctl -b and run the command after the rules have been removed for the not 'down' interfaces.
- 08:42 PM Revision cdad3139: Fixed LB pool status display to match current config
- 08:34 PM Revision cc7ed71d: Removed custom test code
-
08:25 PM Revision 68badd7f: There is not point in unsetting if just after we set the var!
-
08:21 PM Revision e0c27075: Add the ability to select a mode for LB pool members, load balance (default) or manual failover. If manual failover is selected, only allow one server to be chosen as active.
- 08:18 PM Revision a9d5bf0c: Merge remote branch 'mainline/master'
- Conflicts:
usr/local/www/status_lb_pool.php - 06:50 PM Revision 55f88b51: Fixing gettext calls on index.php
- 06:22 PM Revision d8e1797a: Fixing gettext calls on diag_confbak.php
- 06:14 PM Revision c2d0699f: Increase upload file size to 1 megabyte
-
06:06 PM Revision 17cc6627: Fix enable_change() broken on last gettext() implementation
-
05:51 PM Revision 3e2165b6: Default to the 'pools' tab of the inbound load balancer, and move the monitor tab to the end.
-
05:50 PM Bug #774 (Feedback): $priv array defined in priv.defs.inc doesnt store all match values
- Applied in changeset commit:"050f48306fa7a3c9ba44538b67d9cecf4a8390b7".
-
05:40 PM Bug #684: interface status, disconenct button doesnt work
- Applied in changeset commit:"8d9cbe6ff3ba430a3354d3df100ed54bf1031507".
-
05:35 PM Bug #684 (Feedback): interface status, disconenct button doesnt work
-
05:37 PM Bug #757 (Feedback): PPPoE Disconnect button with multiple PPPoE interfaces
- Should be fixed as part of another commit.
Actually when disconnecting PPPoE1 and trying to connect it, the code w... - 05:15 PM Revision bf978a06: Removed duplicated tabs block on status_rrd_graph_settings.php
-
05:15 PM Bug #817: Policy filtering mark not saved
- Applied in changeset commit:"fd9ba7c09f01aaa1ae50bc15e918c05b024f4f36".
-
05:14 PM Bug #817 (Feedback): Policy filtering mark not saved
- Test latest snapshots.
-
04:41 PM Bug #817 (Resolved): Policy filtering mark not saved
- I have a simple setup with WAN and LAN interfaces. I'm trying to add a firewall rule under the LAN interface that ma...
- 05:08 PM Revision 8c29490e: lb status fixes from Ltning
-
04:51 PM Feature #8 (Feedback): Clear states after failover
- I added a solution to run the command after the rules referencing this interfaces are removed from the working config...
-
07:39 AM Feature #8: Clear states after failover
- Ok, had some time spare and tested it with today's snapshot (built on Sun Aug 8 10:20:52 EDT 2010) and behaviour is s...
-
06:31 AM Feature #8: Clear states after failover
- In my last post I ment comment 26, it seems redmine linked issue 26 for the text "poundsign26".
-
06:29 AM Feature #8: Clear states after failover
- I have done some testing regarding this issue around 24th of June.
Calling pfctl -b manually did not do enough at ... -
04:51 PM Revision 18ec0f13: Use correct type so a proper config is generated. Reported by:http://forum.pfsense.org/index.php/topic,25465.msg141966.html#msg141966
- 04:21 PM Revision 01b8a2ff: Fix gettext call added wrong
-
02:40 PM Revision 6c74ac23: Resolves #815. Do not add protection rules if lan interface has no ip.
- 02:29 PM Revision 4bfb2809: Fixing gettext calls on firewall_aliases_edit.php
- 02:27 PM Revision 30ee6258: Fixing gettext calls on license.php
- 02:12 PM Revision 58c550f6: Fixing gettext calls on pkg_mgr.php
- 02:09 PM Revision 42c7b553: Fixing gettext calls on system_advanced_admin.php
- 02:05 PM Revision 9312cca2: Fixing gettext calls on diag_logs_settings.php
- 02:03 PM Revision 32307e40: Fixing gettext calls on diag_logs_ntpd.php
- 02:01 PM Revision 7ae91404: Fixing gettext calls on diag_logs_openvpn.php
- 01:59 PM Revision 094d6ffc: Fixing gettext calls on diag_logs_relayd.php
- 01:57 PM Revision d22fcbb0: Fixing gettext calls on diag_logs_vpn.php
- 01:54 PM Revision 2b315054: Fixing gettext calls on diag_logs_ipsec.php
-
01:54 PM Bug #816 (Closed): USB Keyboard Detection - Boot Hangs
- I'm having issues with booting a system with a USB keyboard. The keyboard works perfectly fine, but when pfSense atte...
- 01:52 PM Revision 0c6342cd: Fixing gettext calls on diag_logs_ppp.php
- 01:21 PM Revision 59bb015e: Fixing gettext calls on status_graph.php
-
10:45 AM Bug #815 (Feedback): IPSEC VPN creation fails if LAN I/F has no IP address.
- Applied in changeset commit:"6c74ac2363176cf4492b2331130998fc4c140048".
-
08:08 AM Bug #815 (Resolved): IPSEC VPN creation fails if LAN I/F has no IP address.
- vpn.inc makes the assumption that the LAN interface will have an IP address. In the case where it does not (for examp...
- 01:19 AM Revision c9fa8254: Show disabled interfaces as well
- 12:50 AM Revision 5b74202b: Adding config.console.inc
08/09/2010
- 11:35 PM Revision cba2736c: Include config.console.inc
- 11:29 PM Revision 032c40c7: Move all console related configuration items to config.console.inc. This will mean that these items are not included when the webConfigurator is being used and only on bootup on the console.
- 09:11 PM Revision fb516dda: don't include 255.255.255.255 here
-
08:14 PM Revision 85405c11: Add the ability to set a periodic RRD and DHCP leases backup from Diagnostics > NanoBSD.
-
06:21 PM Bug #802: Interface reassignment with VLANs after config restore to diff hardware doesn't work
- Yeah but this goes all back to wlan interfaces, ppp, possibly others.
And that means defining rules in code for this... -
02:10 PM Bug #802: Interface reassignment with VLANs after config restore to diff hardware doesn't work
- There's an easier option there, simply detect VLANs with a missing parent interface upon config restore and prompt fo...
-
02:04 PM Bug #802: Interface reassignment with VLANs after config restore to diff hardware doesn't work
- Two options:
* Either make the code OO similar to the shaper one. Which would only keep the real/parent interface sa... -
06:10 PM Feature #814 (Resolved): GUI should allow to bind openvpn on different ip same port
- Details: http://forum.pfsense.org/index.php/topic,27348.0.html
-
06:06 PM Bug #798: IPSEC not working after CARP failover
- do you have a specific bug ID I can track? I can't seem to locate it.
-
05:57 PM Revision 0c77c314: Get the real flags set on the interface to make code below work properly! Ticket #88.
-
05:01 PM Bug #729: if_bridge unpredictable filter interface selection
- I'll test this latest snapshot ASAP.
Very keen to see the results -
03:41 PM Bug #729 (Feedback): if_bridge unpredictable filter interface selection
-
02:50 PM Bug #729: if_bridge unpredictable filter interface selection
- Patch integrated in the builds. Please test the latest one.
-
04:31 PM Feature #809: Config sync username change
- Looks like it takes the ID of the first user and uses that for XMLRPC sync, and since the admin user can't be renamed...
-
03:46 PM Bug #725: DHCP Relay missing logic for dynamic routes
- Yeah that's a problem we can't easily accommodate right now, the solution for the time being is to just do a routing ...
-
01:38 PM Bug #725: DHCP Relay missing logic for dynamic routes
- The problem is that in pfSense currently there is no even generated on changed routes.
So if the underlying route ch... -
01:59 PM Bug #88 (Feedback): TXCSUM forced on at boot which breaks wireless bridging
-
01:34 PM Feature #806: Add private networks to rules dropdown
- It would be better shiping with aliases containing such entries!
- 12:54 PM Revision c3ff89b4: Merge remote branch 'mainline/master'
- Conflicts:
usr/local/www/status_captiveportal.php
usr/local/www/status_rrd_graph.php
usr/loca... -
11:00 AM Feature #813 (Needs Patch): Offer to create a ppp interface during console assignment
- If you only have one physical interface, plus a 3G modem for WAN, the current console assignment is far from ideal. Y...
-
01:31 AM Bug #797: UI: IPsec Phase 2 edit, Address field active for LAN subnet option
- Ahh! I knew I was missing some variable. Glad you were able to narrow it down, you're welcome. But even with the UI n...
08/08/2010
-
09:39 PM Bug #560 (New): loader.conf is empty after a firmware update.
- this reportedly isn't fixed. http://forum.pfsense.org/index.php/topic,27257.0.html
-
06:07 PM Bug #797 (New): UI: IPsec Phase 2 edit, Address field active for LAN subnet option
- Thanks David, the issue is with mobile IPsec only.
-
12:53 AM Bug #797: UI: IPsec Phase 2 edit, Address field active for LAN subnet option
- Emailed you directly Chris.
-
03:21 PM Bug #812 (Resolved): RRD graph time axis not locked to latest times with higher average samples
- See attached chart - this was taken on Sunday 20:12, but the chart shows the x-axis to Monday 0.00...
This is the ... -
04:58 AM Bug #802: Interface reassignment with VLANs after config restore to diff hardware doesn't work
- Though I suppose technically since it only really works with ath at the moment, the similar issue with the VAP config...
- 03:39 AM Revision c708bdd4: add TCP 1119 for battle.net
- 12:52 AM Revision 6c534785: add tooltip. cvstrac 1640
-
12:11 AM Bug #622 (Resolved): Static default gateway overridden by DHCP on WAN
- fixed
- 12:10 AM Revision 4ca92170: add explanation of flags and capabilities from m0n0wall. cvstrac 1564
-
12:08 AM Bug #729 (New): if_bridge unpredictable filter interface selection
- Ermal has a patch to if_bridge that seems to make filtering with if_bridge behave as it logically should (not as it i...
Also available in: Atom