Activity
From 12/22/2010 to 01/20/2011
01/20/2011
-
06:47 PM pfSense Packages Bug #1218 (Resolved): Freeradius package does not start when i do reboot
- first of all i am not debeloper , i am not sure if this place is the right way to post the bug
Every time i reboot ,... -
05:23 PM Feature #1217 (Needs Patch): Change OpenVPN local/remote networks to lists instead of single boxes
- In 2.1 or beyond it would be nice to have the OpenVPN local and remote network boxes instead be lists of networks, so...
-
03:58 PM Bug #560: loader.conf is empty after a firmware update.
- I'm seeing a slightly different behaviour which may be unique to having serial console enabled after a an update.
... -
02:57 PM Bug #1216: OpenVPN client interfaces should not be NATed out of when assigned
- to clarify, that is the tun interfaces are included as "nat on ...", though possibly only where the tun interfaces ar...
-
- outbound NAT is applied on OpenVPN client interfaces when they are assigned, and should not be. Routing is almost alw...
-
-
01:22 PM Bug #1209: cannot restore encrypted configuration file
- confirmed, I can now restore my encrypted config backup. thank you!
-
01:18 PM Feature #1215 (Resolved): DHCP Bootp Flags
- Need support for DHCP Bootp flags on WAN interface. Specifically 0x8000 (Broadcast).
Some ISP's do not set dhcp s... -
01:11 PM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- pptp also working here :)
-
- The lockup issue is likely separate. The forum thread for that is here: http://forum.pfsense.org/index.php/topic,3245...
-
12:25 PM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- I updated on 1/19 as well and my PPTP VPN stability issue seemed to be resolved. But, as Chris stated above, I am ha...
-
08:26 AM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- Just updated to the latest versions the morning of 1/19 and in the afternoon, both versions introduced system lockups...
-
-
12:37 PM Feature #1214: Firewall Schedule Time Should Be Allowed to Straddle Midnight
- Nevermind, I just realized that I can add multiple time ranges to the same schedule. See attached screenshot. My bad.
-
- I wanted to create a schedule for late night _plus_ wee hours of the morning. I entered a Start Time of 21 Hr 00 Min ...
-
11:34 AM pfSense Packages Bug #1213 (Resolved): Mod_Security+Apache+Proxy
- in general setting
"Bind to IP Address
This is the IP address the Proxy Server will listen on.
NOTE: Leave b... -
-
09:59 AM Bug #1075: rrd graphs missing / duplicate
- The problem seems solved, i will continue
to test it at different times of day.
If i find further problems I will ... -
09:37 AM Bug #1211 (Rejected): System Lockup after upgrading from December build to January 19th builds
- This is not you hotline support.
Please use the forums for this issues. -
- After upgrading to yesterday mornings's build pfense locked up after a few hours. I then upgraded to the latest buil...
-
12:08 AM Bug #1177: Passive FTP
- was running the SMP kernel
loaded the developer's kernel -> solid, cannot duplicate the crashes
01/19/2011
-
- Same problems as I reported before using the i386 Wed Jan 19 11:47:04 build.
With testing tonight I was 3 for 3 on... -
- Also only able to retrieve the directory listing on the second try.
Response: 200 Switching to Binary mode.
Comma... -
- Testing with a client behind pfsense using Tue Jan 18 03:34:33. FTP helper takes down box when re-initializing a prev...
-
12:57 AM Bug #1177: Passive FTP
- after some heavy tests I found out that there are a lot of connections droped by the default deny rule!
This finally... -
12:37 AM Bug #1177: Passive FTP
- 2.0-BETA5 (i386)
built on Tue Jan 18 03:34:33 EST 2011
confirmed.. FTP helper is working..
-
- https://rcs.pfsense.org/projects/pfsense-tools/repos/mainline/commits/750951f9b2bd4cdb1bde4748cc51a0258b59f5b3
Fixes... -
- Committed a fix https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/c2461a56d45b678213488ea1ced099a38ead267e
-
- Create a limiter, add a delay, and save. Edit the limiter, erase the delay, and save. The value is still there, not b...
-
- Applied in changeset commit:"f5bafe95a1fb4372288816debaa21b4f943a32e8".
-
- https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/f5bafe95a1fb4372288816debaa21b4f943a32e8
Fixes the i... -
- I'm unable to restore an encrypted configuration file in the latest 2.0 snapshot. It fails with a "real" config back...
-
- Limiters should not be allowed to be specified on non-quick floating rules as they don't work in such a scenario.
-
- when a limiter is renamed it creates a new one rather than renaming it.
-
- thanks
-
- Hi, I upgraded to the Jan 17th firmware yesterday and I can confirm that this bug is fixed. Thanks!
-
-
-
09:29 AM Bug #259 (Feedback): When disabling a dhcp interface, dhclient is not stopped
- I just tested this with a clean 2.0 BETA5 i386 install and I still see dhclient messages in the system logs.
-
- There is some improvement, I can now use an ftp client on LAN in both passive or active mode, but still can't use pas...
-
- Out of the box, a single client instance will not fail from WAN1 to WAN2 when coming from pfSense itself. You can sel...
-
10:43 AM Bug #1206 (Rejected): OpenVPN client is not Multi-WAN capable
- After several day of trying every possible solution, I have to report that the built-in OpenVPN client is not multi-W...
-
10:50 AM Bug #463: PPTP VPN rediction does not work
- This still does not work in Beta5, I still had to make the rules by hand. The the option "Redirect incoming PPTP conn...
-
06:19 AM Feature #1205 (Closed): VPN: User-based / Group-based firewall rules
- Firewall rules on a per-user or per-group basis would be very helpfull.
This means we could limit acces to certain ... -
-
12:05 AM Bug #1130: NAT reflection broken...
- 2.0-BETA5 (i386)built on Tue Jan 18 02:47:41 EST 2011 everything works fine!
Problem seems to have been solved.
...
01/18/2011
-
-
05:30 PM Bug #1130: NAT reflection broken...
- I haven't been able to reproduce any of these issues at least on a snapshot that is more recent than the comments her...
-
- The fix for putting disconnect after logout window committed please test.
-
- Patch committed please test.
-
- Committed a fix just now.
Grab a snapshot from tomorrow and test. -
- Have you tried this on a newer snapshot? The Current Period graph at 12:00am to 7:59am should be working properly no...
-
- Pushed a patch to check for null hostnames from the bt it seems null hostname was passed to the gethostbyname which m...
-
11:35 AM Bug #755: dnswatch not working
- Just for issue tracking - I have, offlist, mailed gdb output from the core to Ermal.
-
- the last snapshot
built on Jan 18 04:33:29 EST
is working for me. -
- Clients from internal network to oudside ftp servers are working without problems.
CLient connecting from the intern... -
- Michael Heller wrote:
> my ftp server is located behind opt interface of pfsense (dmz)
> the clients from LAN side ... -
- my ftp server is located behind opt interface of pfsense (dmz)
the clients from LAN side cannot connect with passive... -
05:11 AM Bug #1177: Passive FTP
- Normal clients behind nat. The FTP server is behind a nat too (pfsense).
Clients can connect without any problem, ... -
- Can you be more specific if the rdr to internal server of passive ftp does not work or normal client behind nat passi...
-
- I can confirm this bug. The same appens here, passive FTP does not work (build of Jan 16 2011)
-
- same here.
internal passive ftp with any rules doesen't work either.
Running 2.0-BETA5 (i386)
builtonMon Jan 17 ... -
- Running 2.0-BETA5 (i386)
built on Mon Jan 17 19:56:49 EST 2011 with NAT and 2 external interfaces. Port 21 forwarde... -
- It should be better now, I make a commit to help out with this:
http://redmine.pfsense.org/projects/pfsense/reposito... -
-
05:31 AM Bug #1188: lighttpd not starting after update 20110111
- I think we can close this bug. Later updates does not cause this issue.
-
- this has nothing to do with IGMP proxy and likely nothing to do with your firewalls at all, at a minimum it's a confi...
01/17/2011
-
- Try a newer snapshot than the date of this post it should fix the issue.
although this is not target for 2.0 the fix... -
- Try a snapshot newer than this post which should fix the issues.
-
09:35 AM Feature #1204 (Needs Patch): Captive Portal Chart
- Hi,
Is it possible to add a chart about Captive Portal users, some statistics on number of users, bandwidth usage ...
01/16/2011
-
- either not a bug or not one we can do anything about, will respond on forum.
-
- No WAN DHCP Discover Request being generated.
ICMPv6 Neighbor Solicitaion is done, but no DHCP Discover is done.
... -
-
- Unfortunately this is still core dumping for me on latest snaps.
-
- In order for a client to successfully authenticate against an IPsec mobile setup that has Xauth enabled, the user mus...
-
- That is a configuration issue, start a thread on the forum and someone can probably help you.
-
04:05 PM pfSense Packages Bug #1201 (Rejected): OpenVPN
- VPN is connecting
router is injected into the client
by
All clients windows with Ip 10.10.199.6/24
wan 2... -
07:53 AM Bug #816: USB Keyboard Detection - Boot Hangs
- I cannot reproduce this error, and used pfsense on many machines mainly with usb kayboards. From Beta4 tested on Via ...
-
06:40 AM Bug #836: Captive portal logout popup windows doesn't disconnect the user
- http://redmine.pfsense.org/issues/1194
01/15/2011
-
- Status -> Captive portal
There the user who are currently logged in are shown and a user who loggs out via button ... -
11:30 AM pfSense Packages Bug #1200 (Closed): Navigational link in Shellcmd package broken
- If you navigate to Services->Shellcmd and you want to get to the pfSense Dashboard by clicking the logo in the top le...
-
- If you navigate to Diagnostics->Backup Files/Dir and you want to get to the pfSense Dashboard by clicking the logo in...
-
10:02 AM Bug #1198 (Feedback): Incorrect tls-auth setting for Peer to Peer SSL/TLS OpenVPN Server with tls-auth enabled
- Hi !
Thanks for your detailed report. The problem should be fixed in the next snapshot.
Regards,
Pierre -
- This is now working correctly. Tested with NanoBSD built on Thu Jan 13 20:30:46 EST 2011.
-
- thanks
-
- That is now working correctly - tested on NanoBSD built on Thu Jan 13 20:30:46 EST 2011.
01/14/2011
-
- I found the following bug in pfSense 2.0-BETA4 (i386) built on Tue Dec 21 15:02:48 EST 2010.
I setup an OpenVPN se... -
- Thanks for letting us know what it was. At least it will be on here for others to see (and find via Google) if they h...
-
04:10 PM Bug #1197: Cannot log into the web interface using Opera Internet Browser v11
- I got it working after a some additional trial and error. I updated the site preferences for the pfsense web interfa...
-
- Post in the forum and see if anyone else has any ideas there, or if anyone else has the same experience.
Also, if ... -
- Works fine in Opera 11 on Windows for me too.
N L wrote:
>
> Any ideas?
Your Opera is broken? :) -
- Jim P wrote:
> It works fine in Opera 11 on Windows and FreeBSD for me. Has since Opera 11 released.
Any ideas? -
- It works fine in Opera 11 on Windows and FreeBSD for me. Has since Opera 11 released.
-
- This issue arises when attempting to log into the web interface using the Opera Internet Browser (version 11 tested)....
-
11:16 AM Bug #1196 (Rejected): Upgraded today (haven't for a week or slightly more) and my servers are now sending out multicast IGMP packets?!
- I upgraded my pfsense 2.0 test boxes today for the first time in about a week.
All of a sudden my firewall logs ar... -
- Duplicate of #1177, other issue is related/known.
-
- I updated my pfsense box to 2.0-BETA5 built on jan 13 2011.
During my test I found out that my ftp server which is... -
07:37 AM Bug #1194 (Closed): Captive Portal Logout Issue
- There is a bug in the way the captive portal handles forced logout initiated by the user. Please see
http://forum.... -
06:36 AM Bug #1193 (Resolved): Traffic Shaper default queue Problem
- As reported here a bug in traffic shaper:
When 2 or more queues are selected as default queue, you get a
_[filter... -
12:42 AM pfSense Packages Bug #1080: Snort Installation fails
- Installation of snort FAILED!
2.0-BETA5 (i386)
built on Thu Jan 13 19:33:19 EST 2011
As on 14-01-2011
01/13/2011
-
- I'm currently running pfSense 2.0-BETA5 (i386) built on Tue Jan 11 15:17:51 EST 2011. I love the Certificate Manager...
-
-
- Worked for me now. Just did an update to latest snap and it rebooted automatically.
-
- Idea:
The Captive Portal Interface assigns an IP via the internal DHCP Server whitch lease time is limited to 10-30 ... -
- Applied in changeset commit:"72b7aa4a8ebb397c21f923cc43a2fa6071a907e6".
-
- Applied in changeset commit:"3b83b51ad2dd7d1ed3ecb0faab251813b3678a8e".
-
- Applied in changeset commit:"396cfe2ee573696436e2c310f4d2610c1610965a".
-
- We already validate the first line, but not the last. Extra safety belts may not hurt though.
The cert on the file... -
- Actually, I lie. That hasn't fixed it. /var/etc/cert.pem is being replaced when the webConfigurator restarts?!
Help! -
- I just pasted an SSL cert into the cert manager to use as the cert for the web interface. I managed to paste the cert...
-
- By default there is no CA with the stock HTTPS certificate, so a missing CA isn't really a problem.
-
- I see CA info is lost after update
*System: Certificate Authority Manager* shows no authorities (empty).
*System... -
- one more note
webgui fails to start with my custom SSL certificate. With "webConfigurator default" certicicate HTT... -
06:46 AM Bug #1188: lighttpd not starting after update 20110111
- This also happened to me on 2.0-BETA5 (i386) built on Thu Jan 13 02:45:05 EST 2011.
Editing config.xml to accept htt... -
- starts working after reverting to HTTP
-
- Webgui stopped working in HTTPS after update pfSense 2.0 BETA5 amd64 20110111...
-
- this doesn't mean downstream queues shouldn't exist at all, they should.
-
- Though discussions on reverting this behaviour is ongoing.
-
09:03 AM Feature #1189: Gateway: Multiple monitor ips
- biatche biatche wrote:
>
> I don't think many here would care for it, since most of you are from the 1st world w... -
07:32 AM Feature #1189 (Duplicate): Gateway: Multiple monitor ips
- Would be my first time making an entry here so if it's not within the rules bear with me thanks.
For gateways to s... -
-
01:09 AM Bug #621: Certificate Manager won't accept a windows CA signed certificate
- I think you fixed the problem. With the snapshot [2.0-BETA5 (i386) built on Wed Jan 12 18:38:12 EST 2011] I am able ...
01/12/2011
-
06:45 PM Bug #1154: Kernel panic after connecting to OpenVPN
- Successfully grabbed the panic in developer:
Kernel page fault with the following non-sleepable locks held:
exclu... -
- Should be OK after this commit:
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/7201ca277ed66540baea... -
- Ok i fixed even the CSR. Can you please try the latest snapshot or the do the last patch listed here manually?
-
- Should be OK with the commit I made, commit:3b83b51ad2dd7d1ed3ecb0faab251813b3678a8e
-
- I created a Firewall: NAT: Port Forward: rule with a description of: "Redirect tftp requests to tftp-proxy running lo...
-
- When the filtering is disabled the graphs have no data to graph since we switched to pf counters.
Probably should ha...
01/11/2011
-
- We also reference the problem in http://forum.pfsense.org/index.php/topic,31721.0.html
-
- Need to reactivate PHP compression:
- turn on zlib.output_compression in php.ini.
- make sure all generated downloa... -
-
- Update to new version did not work, reinstall did. Ticket could be closed!
Thx. -
- Hi,
I'm running psSense 2.0-BETA4 (i386) built on Mon Dec 20 20:21:46 EST 2010. Loving it so far!
I am setting...
01/10/2011
-
11:38 PM Bug #1154: Kernel panic after connecting to OpenVPN
- Chris,
Here is my thread on this also from dec 13
Old snaps worked fine. (oct) this happens on a few different fir... -
09:35 PM Bug #636: layer7 not work correctly
- I currently get:
@ipfw-classifyd: unable to write to divert socket: No buffer space available@
If I have an l7 cl... -
- Keep the same logic as for firewall rules, and remove call to filter_configure when user saves the changes in firewal...
-
- The first cal to filter_configure() occurs when saving the changes in firewall_aliases_edit.php.
The second one occ... -
- After changing an alias, the filter reloads twice, which can lead to a race condition "device busy" like the attached...
-
- The latest snapshot [2.0-BETA5 (i386) built on Mon Jan 10 13:14:45 EST 2011], it still shows the error. Attached are...
-
- I do not think that patch is in a Jan 7 snapshot.
Please try a more recent one. -
- no target, some point in the future.
-
- Hi,
Targetted for 2.0 or 2.1 ?
Pierre
-
-
- Most of what is necessary for 2.0 has been done.
I will leave this open for Future version for any other part that n... -
-
- I added a ldconfig call to rebuilt the lib caches 'just in case'.
-
- for instance: ...
-
- there are still possibilities here to destroy the system by uninstalling packages.
-
- Can yo please try a snapshot from tomorrow and see if it works?
-
- It would be desirable to have minicron go away and integrate it with check_reload_status.
1) minicron is not complic... -
- Committed the other fix because the previous relied on interface being assigned.
-
-
- I just committed a fix for the issue Chris reported.
L J -> if you ahve no output from that command means you will... -
- I've been trying to configure load balanced DNS with pfsense 2.0. It occurred to me fairly quickly that this might no...
-
- There is already something in the works, but it's a separate piece of software (still very early in development). It ...
-
05:30 AM pfSense Packages Feature #1180 (Rejected): I'd love to see a central management in pfsense
- Hello,
i'd love to see a central management solution for the multiple pfsense firewalls. If you have more than one... -
- Just a little update. Now i monitored several alerts so the depending files should exist. The link is still broken an...
01/09/2011
-
07:30 PM Bug #1178: Unable to select VLAN in PPPs interfaces
- You've fallen prey to excess complexity. :) The UI is admittedly not intuitive.
Here are the steps to follow.
)... -
- To your First Question using 8.01 snapshot the
problem still exists.
Attached are pcap files (passwords/usernames... -
- When the NanoBSD upgrade by webinterface is done the message 'NanoBSD Firmware upgrade is complete. Rebooting in 10 ...
-
- the main issue here is fixed. the remaining is just that it shows "Gathering data" on AJAX reloads only (status page ...
-
-
- OpenVPN interface assignments work fine set to type "none" as they should be, they have an automatically handled dyna...
-
- no change. When changing a VLAN from a physical interface to lagg or vice versa, it leaves the old VLAN interface as ...
-
-
-
-
- looks like this is all good.
01/08/2011
-
- Keep an eye on it for your next firmware upgrade. Even though there weren't any more changes to that part, I'm curiou...
-
- I tested this now with snapshot 1/8 and the problem is kinda gone. Although not all packages got reinstalled automati...
01/07/2011
-
- Using the latest snapshot [2.0-BETA5 (i386) built on Fri Jan 7 15:25:33 EST 2011], it still shows the error:
The cer... -
06:19 PM Bug #621: Certificate Manager won't accept a windows CA signed certificate
- I will try it out sometime during the weekend, and get back to you.
Thanks! :D -
- Patch is on latest snapshot please test with them.
-
- After checking this more thoroughly this seems to be just about the diff in the created subject.
Another method sh... -
- There is still a regression here with reauthentication. It does re-authenticate, but at least MS IAS refuses the requ...
-
- The command above gives no result. I captured the traffic for 2 minutes after logging in.
Could you please post wh... -
- I just tested this and it works fine.
19:02:26.807863 IP 192.168.30.1.30906 > pfSense.localdomain.radius: RADIUS, Ac... -
- Should be OK on the next new snapshot dated after this post. (Note that the one building right now does not include t...
-
- This is easy to reproduce with siproxd as well, no firmware update required.
Just rm /usr/local/pkg/siproxd* and r... -
- Just had the problem with the gui not showing when upgrading from 2.0beta4 to beta5. after a reboot it came back up
-
05:33 PM Bug #1178: Unable to select VLAN in PPPs interfaces
- When I select WAN interface in PPP editor for pppoe0, I get a kernel panic.
-
- Some screenshots may help you to understand my problem...
-
- For 2.0 you have either to assign vlan and on interfaces->$assignedone choose pppoe.
Or assign the vlan and then on ... -
- VLAN interfaces does not appear in PPPs link interfaces.
I have two physical interfaces:
- le0 (used for LAN)
- ... -
- Please post packet traces on both sides of the connection.
And the 7 snapshot has another fix in that area so try wit... -
- On a Thu Jan 6 02:48:15 EST 2011 Snapshot
I am no longer able to connect to an internal
ftp server using pasv mode.... -
- 2.0BETA5 Built on 1/7/11 still has this problem. My current work around is to do a constant ping to something on the...
-
-
- OK Ok solved
-
- Are you sure this is still a problem on current snapshots? A fix was committed days ago:
https://rcs.pfsense.org/p... -
- Captive Portal Status not disconnect_client() in widget
Fatal error: Call to undefined function captiveportal_di... -
- Max Riedel wrote:
> I just tried it with ssh.
> I created a new Layer7 group, enabled it, gave it a name, selected ... -
- I just tried it with ssh.
I created a new Layer7 group, enabled it, gave it a name, selected ssh as protocol action ... -
- I have a pair of pfsense 2.0 beta servers. I'm syncing config between the servers so that I edit on my 'primary' serv...
01/06/2011
-
11:06 PM Bug #1173 (Closed): RRD Graph for cellular - not working for huawei E1762
- It was suggested that I open a bug report for this RRD issue:
I can report that my Huawei E1762 USB modem seems to... -
- This is probably because even though HTTP is chosen, the certref is still kept in the config, so if they go back to H...
-
- If you switch from HTTPS to HTTP, the certificate used for HTTPS is still marked as used where it should not be.
-
- duplicate of #1170
-
- It would be nice to have a revoke button under the certificates screen.
This would make easy using CRLs and more int... -
- this is actually only possible if you manually screw with your certs in the config, it generates serials correctly un...
-
10:30 AM Bug #161: HTTPS certificates invalid - duplicate serial
- I don't have this issue on the snapshot of today 20110106-0206. Running firefox 3.6.13.
-
- To ease the process of revoking a cert, system_certmanager.php should have an option to revoke a certificate
-
- Not sure why it didn't associate itself on the ticket, but this should be fixed by the following commit:
https://r... -
- The per-entry description field, internally called "detail", is not CDATA escaped like the main description field so ...
-
- Entering chars like umlauts in the description-fields of aliases, they are not shown later.
Entering umlauts in the ... -
- This has apparently started happening again:
http://forum.pfsense.org/index.php/topic,31906.0.html
-
- Alright, I'll close this out then.
-
10:23 AM pfSense Packages Bug #1166: incorrect url for unbound-1.4.7
- Works for me after a few hours of sleep :-) Case closed.
-
- Can you try this again? http://files.pfsense.org/packages/8/All/unbound-1.4.7.tbz Is present on our server. When I f...
-
- I noticed this issue after upgrading to the latest snapshot. I had all kinds of unspecified problems with the upgrade...
-
- If there is, it won't be trivial to do. We use bsnmpd, and last I looked it did not support an exec call for custom O...
-
- Hi,
Is it possible to add an OID entry to get the status of the wan load balancer in SNMP? Eg: WAN1 on/offline, OP... -
- The ticket system is English only, please, and it's not a place to request support. Post on the French forum (http://...
-
05:38 AM pfSense Packages Bug #1165 (Rejected): Fatal error: Cannot redeclare alias_expand_urltable() (previously declared in /etc/inc/util.inc:490) in /etc/inc/util.inc on line 505
- bonjour tout le monde
j'ai une erreur avec pfsense
Fatal error: Cannot redeclare alias_expand_urltable() (previou... -
- Duplicate of #1165
-
07:44 AM pfSense Packages Bug #1167: Fatal error: Cannot redeclare alias_expand_urltable() (previously declared in /etc/inc/util.inc:490) in /etc/inc/util.inc on line 505
- Salut,
en anglais svp :)
english please :) -
- bonjour tout le monde
j'ai une erreur avec pfsense
Fatal error: Cannot redeclare alias_expand_urltable() (previou... -
04:52 AM pfSense Packages Bug #1164: Installing pfSense 2.0 on a Dell PowerEdge R210
- Okay, thanks for the warning.
Lauro -
- This is not the forum, please go to forum.pfsense.org and post there. This is only for specific, detailed bug reports...
-
- Hi all,
This is my first post in this forum
I hope to contribute with friends.
Well, I have the following prob...
01/05/2011
-
11:14 PM Bug #636: layer7 not work correctly
- 2.0-BETA5 (i386) built on Wed Jan 5 12:00:59 EST 2011
Still doesn't appear to be working. Opened up the default LA... -
- I committed changes in kernel yet again which should impact even layer7.
Feedback from new snapshot is welcomed. -
- pfSense-2.0-BETA5-20110105-1707.iso.gz in widget Squid stop by not restart
-
-
05:27 PM pfSense Packages Bug #1024: Snort GUI broken in latest snapshots
- New Bug #1162
-
- I'm having this exact issue after upgrading to the latest Beta5 snapshot and installing the snort package.
-
02:41 PM pfSense Packages Bug #1024: Snort GUI broken in latest snapshots
- This problem is back after snapshot from the 3 jan, still present in the snapshot from the 5 jan.
Problem first no... -
- Sorry, I thought this was appropriate since #1024 is closed.
-
- duplicate of #1024
-
- Clarification:
snort_interfaces.php was working fine BEFORE I added an interface. -
- The GUI for /snort/snort_interfaces.php is broken.
This is same issue as in Bug #1024.
I am having the same iss... -
- Its just a reload of the settings that take part in the les than 30% calculation.
-
- Closing since it relates to #1093.
-
- This is with 8.2 driver in the builds.
-
- Well its a bug per se but i would not consider it critical for 2.0.
Its rather unusual to filter outgoing on a box t... -
- Should be ok now. It was using not correct key values to assign.
-
- this is a config issue of some sort, not a bug. I suspect related to the difference in automatic NATing where gateway...
-
- Hello,
Example:
WAN-Interface:10.0.0.2 GW1: 10.0.0.1
LAN-Interface:10.0.100.1 GW2: 10.0.100.2
OPT1-Interface: ... -
- FTP proxy is in the kernel on 2.0 and has no daemon.
-
02:36 PM Bug #1161 (Rejected): FTP-proxy don't start at boot
- Hello,
ftp Helper seems don't work on pfsense 2.0 beta5 build on 01/01/2011
I d'on't find any process listen on... -
- Fixed per dvserg
-
- Fixed per dvserg
-
- config file again (now it works ?!?)
-
- There seems to be no feature for packet sniffing ;-). I used Wireshark at the RADIUS Server. The used user was test, ...
-
- Well the issue seems to change a bit depending
on the current time.
at 17:18 (gmt+1) i see :
1h , 1min avg
1d... -
-
09:31 AM Bug #1158: DNS servers from DHCP/PPPoE missing
- I had this problem too.
Works for me now on version Wed Jan 5 03:16:13 EST 2011
Thanks!
01/04/2011
-
- thanks
-
- Works for me.
Thanks! -
- L2TP is likely just going to be plain L2TP for 2.0 and we can work out the IPsec bits later. The underlying software ...
-
10:43 AM Bug #475: L2TP is not functional in the way users will expect
- Hello,
This is functionality that I could really use, and would be happy to assist in any way that I can. However... -
- Hi David,
I am curious on the third subnet problem with your iPhone. In your pfSense IPSEC logs, do you have entri... -
12:11 PM Bug #1116: IPsec error, racoon won't start with more than one phase 2
- Excellent, the iPhone access is not my priority right now though it is odd I could only get to two of the three subne...
-
- Thank you for the link.
Workarround seems to work in my environment, cause I just have one client, needing the pptp ... -
02:49 PM Bug #1075: rrd graphs missing / duplicate
- I no longer see this issue.
mysnap
2.0-BETA5 (i386)
built on Mon Jan 3 13:22:20 EST 2011
-
02:24 PM Bug #1158: DNS servers from DHCP/PPPoE missing
- I have 6 pfsense and one test.
Will test tomorrow.
Thank you.
-
- It would not be in a new build yet. Do a gitsync (http://doc.pfsense.org/index.php/Updating_pfSense_code_between_snap...
-
- Sorry no go
2.0-BETA5 (i386) built on Tue Jan 4 07:15:40 EST 2011
-
- https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/807fd6cd358c71dd48fb7766e49f05f86b93d3fb
Is the fix ... -
- I am seeing this in a VM as well. With DHCP on WAN, no DNS servers are present on the firewall.
-
- the WAN interface is on DHCP. the ISP DNS is missing.
under System: General Setup enter DNS. everything is working n... -
- upgrade to 2.0-BETA5 (i386) built on Mon Jan 3 23:29:55 EST 2011.
could not access any web site.
performed DNS, re... -
- Please don't post questions on tickets, post to the forum or mailing list.
-
05:29 AM Bug #911: Need option to disable state killing on WAN failure
- Can someone please confirm that when apinger detects a monitor IP as being down, provided there aren't any load balan...
-
02:57 AM pfSense Packages Bug #1157: Open VMware Tools installed, enable VMXNET2 interface -> crash pfSense
- I (re)-found this topic on pfSense forum:
http://forum.pfsense.org/index.php?topic=25439.0
-----------
I remember ... -
- I tried to install Open VMware Tools, the tool successfully installed.
From the console I could see the system detec... -
- This has regressed it appears, after generating an internal certificate and changing the web interface to HTTPS, I en...
-
- We've done multiple production 2.0 OpenVPN deployments within the past week even and haven't seen this. Please attach...
01/03/2011
-
10:21 PM Bug #1151: Outgoing pptp Traffic-Flow stops after a while
- Please see this thread for additional information - I have the exact same issue: http://forum.pfsense.org/index.php/t...
-
- All is ok in 2.0 afaik.
-
- Pfff.. I forgot to add the main file for authentification (sasl.inc). It should be ok now.
Sorry for the noise.
P... -
-
- Lori Paniak wrote:
> Just upgraded and tested e-mail on the latest snapshot (Mon Jan 3 03:26 2011)
>
> I get an e... -
- Just upgraded and tested e-mail on the latest snapshot (Mon Jan 3 03:26 2011)
I get an error:
@Warning: require... -
- Can you try again with new snapshots i added some changes to make dns reloading faster and have more time to reload b...
-
12:25 PM Bug #943: 2.0-BETA4 Dynamic DNS updates not working
- Just re-installed a fresh image on a different CF card "Version 2.0-BETA5 (i386) built on Mon Jan 3 04:24:15 EST 2011...
-
-
02:24 PM Bug #1152: Client mode OpenVPN gateways sometimes not added to apinger
- This also happens on my wimax interface periodically when it does not have carrier (unplugged). It will randomly say...
-
- updated to actual issue
-
03:05 PM Bug #1107: mpd on AMD64 generates invalid checksums with NAT
- Sorry for not answering sooner. The MTU for the PPTP is 1456 and the MTU for the openVPN is 1500. May this be a part ...
-
- Apparently there are issues here. Just saw a config from a customer that upgraded with mobile tunnels and the upgrade...
-
- Thanks for the feedback.
partial answer: for the error "The command '/usr/local/sbin/racoonctl -s /var/db/racoon/r... -
- OK I added a second subnet (phase 2) entry after upgrading my firewall VM to the most recent beta (Jan 1 i386) to my ...
-
- If you upgrade a VMware instance from 1.2.3 to 2.0 with the VMware tools installed, once booted into 2.0 (FreeBSD 8) ...
-
09:27 AM Bug #1155 (Resolved): [patch] status_gateways.php doesn't show last check time
- On status_gateways the last check time is now shown because the 'lastcheck' is in the status array, not the gateways ...
-
03:21 AM Bug #1154 (Closed): Kernel panic after connecting to OpenVPN
- I have 2.0-BETA5 (i386) built on Fri Dec 31 14:08:23 EST 2010.
After connecting from a client to the firewall via ...
01/02/2011
-
- It is possible to create an invalid config by reassigning an interface that is bridged. For example you can have LAN ...
-
- Hi all,
Stuff added ! Auth with SMTP should work now.
Richard, may you try again ?
Thanks,
Pierre
-
- not rrdtool... apinger.
-
- At times, unknown how to replicate for sure, OpenVPN gateways disappear from the apinger.conf and hence apinger.statu...
-
11:29 AM pfSense Packages Bug #1131: str_split function missing in squidGuard
- Bug Fixed.
-
- After bringing up a pptp-connection to a remote network, traffic seems to be blocked after a while, but the tunnelsta...
-
- When multiple radius servers are configured for the the captive portal and the captive portal is configured to send a...
-
03:30 AM Bug #1149 (Closed): nano build - upgrade size failure on USB flash drives
- Fresh USB key I loaded 12/29 nano 1G or 2G image on it.
- on reboot, the dashboard prompted me to upgrade to 12/30...
01/01/2011
-
- Sounds fine
-
- I found the requested sasl class from here: http://www.phpclasses.org/package/1888-PHP-Single-API-for-standard-authen...
-
- Alias capabilities is now removed from fields not working with aliases (autocompletion and validation).
-
07:30 AM Feature #385: Allow the use of Captive Portal to restrict services on the firewall itself.
- Thats a feature I missed on pfsense too. I know very well the watchguard solution:
A small webserver (https) at the ...
12/31/2010
-
04:39 AM Bug #1088: CARP sync broken
- Hi guys, carp issue exist in following scenario, VMware pair with 4 interfaces: 1 outside, 1 inside, 1 sync and last ...
12/30/2010
-
- Hi Michel,
Can you copy/paste me (with anonymous IP's and keys) your ipsec section from /cf/conf/config.xml ?
T... -
01:49 PM Bug #1116: IPsec error, racoon won't start with more than one phase 2
- but i can see in syslog
php: /status_services.php: The command '/usr/local/sbin/setkey -f /var/etc/spd.conf' retu... -
- working for me :)
-
- Notes:
- /etc/inc/notices.inc at line 309 should set $smtp->user (and not $smtp->username which does not exist)
- A... -
10:08 AM Todo #1139: Email notification test button
- Also there is no smtp-auth types. there must be some auth methots in my opinion.
TLS, Plain etc. -
- Duplicate of #1139 and #1141 - please look at existing tickets before opening new ones.
-
- Hello
there is no test button on Natification setup page
/system_advanced_notifications.php
when I set up a e-m... -
- Uploaded an updated patch with a correction to code having to do with limiting the number of APs allowed (limit of 8 ...
-
04:47 AM Bug #337: sticky connections do not work
- Could this freebsd kernel issue be related?
http://www.freebsd.org/cgi/query-pr.cgi?pr=148290 -
- For me sticky connections works for like a minute or 2, then suddenly no connections are possible at all to any host....
12/29/2010
-
- Closer, everything but the username and password is converted properly. It's completely missing the username and pass...
-
- You can now use address pools for outbound NAT in three different ways after commits I made today:
* By picking a ... -
05:26 PM Bug #1030: Interface case change in apinger.conf needs reverted
- I guess it should be mentioned in the release notes at some point then, as many people will have the problem.
Or p... -
- http://forum.pfsense.org/index.php/topic,31580.msg163359.html#msg163359
-
- I tried to setup smtp notifications, but it keeps failing with authentication errors.
Another user also verified t... -
- duplicate of #1141, please stop opening duplicates.
-
- smtp email notifications setup from the websense interface does not seem to work - fails authentication.
Another u... -
- duplicate of #1141
-
- smtp email notifications setup from the websense interface does not seem to work - fails authentication.
Another u...
12/28/2010
-
-
- Hi !
Jim: I just commited what we concluded a few days ago. If we need more logic, I suppose we could open a new t... -
- Diagnostics: Configuration History
add an option whitch can delete more than one snapshot.
Additional: option to... -
- I used IE. But actual snapshot is fine.
-
-
01:55 PM Bug #1134: Adding new Gateway in interface page does not work
- It was Firefox. But after update to the latest snapshot it works just fine. No more problems.
-
- An internal server error happens if I try to upload the config.xml.
http://depositfiles.com/files/3dwu89fko -
- I reinstalled pfsense from CD. I created the complete configuration via webinterface.
Is there any option to creat... -
- Yes, the connection is Comcast Cable with DHCP.
I agree it seems strange, but it happens every time.
Thankfully, th... -
- It looks strange to me that your dns updates during dyndns running which is highly unlikely to happen!
Are you on dh... -
- Committed patch.
-
- Added the radius port and accounting port to the config.
https://rcs.pfsense.org/projects/pfsense/repos/mainline/co... -
-
- Having a test button to be clicked while configuring e-mail notifications is a must.
-
- Is the diversity setting still not showing up in /var/tmp/ath0_wlan0_setup.sh? (do you have it configured for default...
12/27/2010
-
05:52 PM pfSense Packages Bug #770: imspector don't install on 2.0-BETA3-20100727
- I can confirm that instalation is ok, but nothing is logged.
2.0-BETA5 (i386)
built on Mon Dec 27 09:05:00 EST 2010 -
- It works for me on the most current snapshot (2.0-BETA5 (i386) built on Mon Dec 27 09:05:00 EST 2010) with Firefox 3....
-
- What browser is this?
-
- I can confirm the same problem with 2.0-BETA4 (i386) built on Fri Dec 17 15:11:41 EST 2010. I had to go to Routing ->...
-
- Adding new Gateway in interface page does not work.
If you klick on "add a new one" and enter a gateway the page s... -
- In 1.2.3 there is a checkbox to disable reply-to on WAN rules under System > Advanced. The same option and functional...
-
- Yeah after looking it over some more and in light of it coming from 1.2-RELEASE I've changed the description a bit. I...
-
- Oh, there is no handling of networks reachable via routers other than the gateway on that interface. Just have to dis...
-
- Seth's router was hitting reply-to for a network reachable via static route, so there may still be a bug then.
-
- We already automatically bypass reply-to for directly connected subnets via a kernel patch, have since 1.2.3 (at leas...
-
- Note that this was hit when someone upgraded from a 1.2-RELEASE box. 1.2.2/1.2.3 had a global reply-to disable checkb...
-
- If pfSense is in use as an intermediate router (multiple networks on LAN and WAN directly connected or reachable by d...
-
- Ermal Luçi wrote:
> It does not matter really if it was WAN/LAN/OPT# ... Just test if it works as you expect.
the... -
- It does not matter really if it was WAN/LAN/OPT# ... Just test if it works as you expect.
-
09:17 AM Bug #1135 (Rejected): Empty DHCP client hostname and client identifier in GUI not respected
- While replacing my telco router with pfSense I came across an issue where the telco DHCP server would not respond to ...
-
- Committed the fix even on vlan config page.
Please test! -
- Can you give me a packet trace and your config.xml about this?
-
- Does still not work at
2.0-BETA5 (i386)
built on Sun Dec 26 01:03:42 EST 2010
Same behaviour. -
- Sorry for the delay.
The Problem is still there.
See attached screenshot of recent
snapshot.
12/26/2010
-
- Chris Buechler wrote:
> Warren: have you tested this?
Yeah - it was working 100%. I could not test for extended p... -
01:23 AM Bug #1121: wireless interface antenna settings not applied at boot
- i tried the latest snap now what happens is as soon as the system boots the values r
dev.ath.0.txantenna: 0
dev.ath...
12/25/2010
-
- Alexandre Paradis wrote:
> Right now it seems to work, but my pppoe was on a OPT1 interface, i will try again on ano... -
- Right now it seems to work, but my pppoe was on a OPT1 interface, i will try again on another box with pppoe as prima...
-
-
- Seems to work now !
Beginning package installation for imspector...
Downloading package configuration file... d... -
-
-
-
- needs refinement in the future
-
-
-
-
-
-
-
-
-
-
-
-
-
- Still leaves behind the old VLAN. ...
-
-
- can't replicate
-
-
-
-
-
-
-
-
-
-
-
-
-
- Warren: have you tested this?
-
-
- Ports for RADIUS and accounting are still not used
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Not fixed. It uses the server address rather than the client addresses.
-
-
-
-
-
-
-
- Scott probably fixed it in Revision e584baa8903c7f83d8de6440563b200aacd1e53c
Will check in next snapshot. -
- that's by design. copy included with releases has been updated.
-
- The bogons table is kept updated after a reboot without upgrading, but its being overwriten when we update to a newer...
-
-
-
- This is obviously not entirely fixed, though the bulk of the issues are gone. Something bad in the RELENG_8 driver st...
-
-
- wouldn't scale, and would take way too long to load the page. It works, I just tried it.
-
- even if i ping from the lan interface, its still offline. maybe we could setup a way to ping certain specific lease s...
-
- works fine. the host has to be active in the firewall's ARP cache to show online, so it won't if it's not accessing t...
-
- Static dhcp lease is showing offline in the dhcp lease page, even if the computer is online.
12/24/2010
-
- Seems related to the fact that if port 80 is used for access to the webgui, port 80 doesnt seem to be able nat reflec...
-
- I cant get NAT reflection to work or stay working.
The recent build got it working again, until I changed it and c... -
09:19 AM Bug #1093: Problems with em(4)
- Then close it. I am not buying another NIC to test it. I can say that the PCI Express NIC I have never had any trou...
-
- I'm on i386 full latest and never had any problems either. I got 2 dual GBit intel pci-x nics using em drivers..
-
07:16 AM Bug #1093: Problems with em(4)
- I am using 23rd Dec BETA4 amd64 on vmware with em driver.
I have been using this for some time and have never ha... -
09:11 AM Bug #757: PPPoE Disconnect button with multiple PPPoE interfaces
- Hi there - I'm still following this issue. I will update to the latest snap when I'm back onsite later today and rep...
-
- I have not seen this error on yesterday's BETA4.
I have rebooted twice just to be sure so I think it is safe to ... -
- squidGuard gives errors under pfSense 1.2.3 because php4 does not provide the str_split function required by squidGua...
-
- i agree that this is a good idea especially when running in a multi-wan environment where upstream proxies are used t...
-
-
- ok under 2.0-BETA4 (i386) built on Thu Dec 23 13:17:58 EST 2010
12/23/2010
-
- Just updated to 2.0-BETA4 (i386) built on Thu Dec 23 15:39:33 EST 2010. Created a new L7 group for HTTP. Applied the ...
-
- It would be nice eventually to have an enable/disable toggle button (with a confirmation dialog) for VPN tunnels that...
-
- Committed thanks.
-
- on pfSense 1.2.3-RELEASE
Running in Failover mode between WAN and OPT1 I noticed that once in a while monitoring ... -
- Fixed thank you for reporting.
-
- on Version 2.0-BETA4 (i386) built on Thu Dec 23 03:37:06 EST 2010
After Auth on Captive Portal the following error ...
12/22/2010
-
- Well of course they should, but whether or not both Cisco and Shrew will work with the same config is the question. :...
-
- If you're asking if multiple P2 networks should be supported then YES! I was using this regularly from Shrew and my i...
-
- I think that sounds right, it should do the right thing automatically then.
Not sure if we should prevent someone ... -
- Ok, so:
- for multi p2, use complete sainfo.
- for mobile single p2, for pure-psk or psk/xauth, generate anonymous ... -
- Sounds OK, though we also had reports that the Cisco VPN client would only connect with sainfo anonymous even without...
-
- I check the code a little, we can have "sainfo anonymous" when setting the phase2 to "transport". So for such mobiles...
-
05:23 PM Bug #1126 (Resolved): Duplicate "System Activity" in /etc/inc/priv.defs.inc
- Fixes incorrect label that displays in system_groupmanager_addprivs.php Screen shot and git patch attached
-
- There were some commits related to RRD can you please try a new snapshot.
-
- Does you vpn have lower mtu than openvpn?
That would explain it with that DF bit set on packets. -
- Traffic_shaper_wizard, traffic_shaper_wizard_dedicated and Traffic_shaper_wizard_multi_all will not show this problem...
-
- I do not think there is any issue here so move along.
-
- Committed the last missing fix.
Please test again. -
- Committed another fix can you please try again with newer snapshots.
It will be worth to try even blocking http with... -
- Tested with latest snapshot (2.0-BETA 4 (i386) built on Tue Dec 21 12:44:54 EST 2010), and still not working. Activ...
-
11:51 AM Bug #886: RRD graph generation time scaling not written correctly
- hmm, the quality RRD doesn't seem to be working recently, although for entirely different reasons I'm sure.
-
11:17 AM Feature #1103: Wake-on-Lan Widget for Dashboard (with code)
- I just found out about 'convert_friendly_interface_to_friendly_descr()' from another ticket.
Should I submit another... -
- A fix was already checked in today for this:
https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/0d86d... -
- When trying to access the graphs the following error occurs:
Parse error: syntax error, unexpected '{' in /usr/loc... -
- There was already a bit of text that would pop up when you put the cursor over the link. With the addition of the co...
-
- Applied in changeset commit:"f39b73ad06be35f2da4b227e4894f56d412e4175".
-
- I've committed a fix for an issue that it may possibly display the wrong option as selected and may possibly save the...
-
- diversity setting command doesn't appear in that file, i pasted the exact contents of the file.
the order of the com... -
- https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/475c1932c3158a4e9ca718ae3ba2a2eee739ef61
Please tr...
Also available in: Atom