Activity
From 09/17/2017 to 10/16/2017
10/16/2017
-
07:49 PM Revision 12bcf7e9: Change the VLAN inteface names to use the 'dotted' format of FreeBSD, which is shorter and helps to keep the interface name smaller than the limit (16).
- This fixes the 4 digit VLAN issues when the NIC name is 6 bytes long.
Ticket #294 -
07:07 PM Revision 40437d5d: xmlrpc, webgui, prevent that a xmlrpc.lock is placed that is never unlocked, thus hanging php and the webgui after a few more sync request are trying to acquire the lock and all are waiting..
- (cherry picked from commit 8239af2dc167fd865818a29b4e01d7e464d564d3)
-
07:07 PM Revision ee0e2507: Merge pull request #3848 from PiBa-NL/20171011-xmlrpc-prevent-lost-lock
-
07:07 PM Revision 6665dd8c: Remove no-op code
- See https://redmine.pfsense.org/issues/7889 for related discussion
(cherry picked from commit 401e2ac783756e22ab738d... -
07:07 PM Revision fc9abcc7: Remove no-op code
- See https://redmine.pfsense.org/issues/7889 for related discussion
(cherry picked from commit cbbb8fdb62fc75bfac28b2... -
07:06 PM Revision 8734adf8: Merge pull request #3838 from doktornotor/patch-9
-
06:31 PM Revision 840a290e: Merge pull request #3831 from luckman212/patch-1
-
06:21 PM Revision e4aef1ed: Merge pull request #3850 from doktornotor/patch-11
-
06:07 PM Revision f96376a3: Allow both AES-NI and Crypto modules to be loaded at the same time. Fixes #7810
-
06:07 PM Bug #7951: WPA2 issue (KRACK)
- Fixes for KRACK now in FreeBSD Ports tree: https://github.com/freebsd/freebsd-ports/commit/e0ec9d45b57b88487440141915...
-
10:08 AM Bug #7951 (Resolved): WPA2 issue (KRACK)
- We need to import the FreeBSD fixes for wpa_supplicant and hostapd related to the recently-disclosed key reinsertion ...
-
05:53 PM Revision 5e5b13a9: Merge pull request #3821 from PiBa-NL/20170916-bsnmp-hostrest-check
-
05:43 PM Bug #6455: Can't delete Virtual IP "referenced by a least one gateway" if gateway outside interface subnet
- Thanks! Just ran into this and changed the mast to /32 and I was then able to delete it. I thought it was a 2.4.0 bug...
-
05:16 PM Revision 2105c0e2: Change OpenVPN to retry client auth when it fails by default, rather than making the process exit which confuses users. Fixes #7506
- (cherry picked from commit a69a9182278bab4843f3215a1b484f9452558884)
-
05:14 PM Revision a69a9182: Change OpenVPN to retry client auth when it fails by default, rather than making the process exit which confuses users. Fixes #7506
- 04:17 PM Revision 7a696510: Merge pull request #3817 from marjohn56/Unbound-serve-expired
- 04:09 PM Revision 9503d881: Merge pull request #3826 from doktornotor/patch-5
-
04:05 PM Revision 84ec58b7: Unbound Serve expired
- Serve expired – Records stay in cache after TTL expires, with a TTL value of 0, if a new lookup is requested the cach...
- 03:45 PM Revision c676c135: Fixed #7896
- 2.3 is slightly different than 2.4 with different variables so this
fix is different than the 2.4 version. -
03:42 PM Bug #7884 (Resolved): Unbound refusing non-recursive/iterative queries even from localhost
-
03:34 PM Bug #7884: Unbound refusing non-recursive/iterative queries even from localhost
- On pfSense-netgate-memstick-ADI-2.4.1-DEVELOPMENT-amd64-20171016-1127.img "dig google.com +trace" and "drill -T googl...
-
03:28 PM pfSense Packages Bug #7871 (Resolved): Add squid validation for selected CA when MITM is enabled
- Great, thanks for testing!
-
03:22 PM pfSense Packages Bug #7871: Add squid validation for selected CA when MITM is enabled
- Looks good here, only usable CAs are being offered in the Squid GUI with 0.4.42. Thanks!
-
11:19 AM pfSense Packages Bug #7871 (Feedback): Add squid validation for selected CA when MITM is enabled
- OK I added two different sets of protection:
1. Input validation to warn if a user selected a CA without a private... - 03:22 PM Revision a55c5a21: roll back for 2_3 for picture widget
-
03:20 PM pfSense Packages Bug #7954 (Confirmed): Package upgrade/reinstall gets stuck on deinstall if the package-provided service is not running
- So you have a package and the service is not running. Trying to upgrade/reinstall produces the following:...
-
02:55 PM Bug #7953 (Resolved): XMLRPC produces an error when attempting to sync an empty section
- When attempting to sync an empty section (e.g. VIPs are set to sync, but no VIPs are defined), the following error is...
- 02:55 PM Revision 1f8a9b40: Fixed #7896
- Handled the case where there is no picture and made it simpler to load
a picture.
(cherry picked from commit dc91c94... -
02:51 PM Revision 14ef41c4: Let 2.4.0 users to go to 2.4.1
- 02:28 PM Revision dc91c949: Fixed #7896
- Handled the case where there is no picture and made it simpler to load
a picture. - 01:57 PM Revision 7f9b448f: Fixed #7714
- Added JS code to formate the date/time for UCT
(cherry picked from commit 893b609111be502233a7a4ad6804fff1e4779a03) - 01:53 PM Revision 893b6091: Fixed #7714
- Added JS code to formate the date/time for UCT
-
01:27 PM Revision 7077ba39: Update Zabbix options
- - Bring versions 3.2 and 3.4
- Enable IPMI, VMware and SSH monitoring for Zabbix Proxy
- Remove unnecessary items -
01:20 PM Bug #7810 (Feedback): openssl/openvpn need to have loaded booth AESNI and cryptodev to accelerate AES operations , but gui alows you load only one at once
- Applied in changeset commit:f96376a378211155181a02a053cbb7ff9a700056.
-
10:34 AM Bug #7810: openssl/openvpn need to have loaded booth AESNI and cryptodev to accelerate AES operations , but gui alows you load only one at once
- There is still some debate as to whether or not this is even necessary or would ever help, but it should be simple to...
-
01:12 PM pfSense Packages Bug #7947 (Rejected): freeRadius 3 on pfSense 2.4 not work
- There isn't enough really to go on here, please start a forum thread so we can discuss and diagnose the issue. Also, ...
-
12:57 AM pfSense Packages Bug #7947: freeRadius 3 on pfSense 2.4 not work
- i edit /usr/local/etc/raddb/sites-enabled/default
i comment:... -
12:42 AM pfSense Packages Bug #7947: freeRadius 3 on pfSense 2.4 not work
- i use EAP section
and freeRadius2 worked in 2.3.4
2.4 + FR3 = not worked -
12:30 PM Feature #7506 (Feedback): Use "auth-retry nointeract" to prevent OpenVPN clients from exiting or attempting to prompt for passwords
- Applied in changeset commit:a69a9182278bab4843f3215a1b484f9452558884.
- 12:26 PM Revision 233dde07: Fixed #7921
- (cherry picked from commit 5fce3e8e905c3a2029475293cf760ee2c2a51074)
- 12:24 PM Revision 5fce3e8e: Fixed #7921
-
12:18 PM pfSense Packages Feature #7945 (Resolved): NET-SNMP - Flooding log entries
- Great, thanks for testing!
-
12:06 PM pfSense Packages Feature #7945: NET-SNMP - Flooding log entries
- Jim Pingle wrote:
> I just pushed a fix for this, it will show up shortly to install.
Updated and tested. Looks g... -
07:49 AM pfSense Packages Feature #7945 (Feedback): NET-SNMP - Flooding log entries
- I just pushed a fix for this, it will show up shortly to install.
-
11:43 AM Bug #7946: 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- It seems to be anything it can't validate against the current repository (offline or online). It should list them all...
-
11:41 AM Bug #7946: 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- Well yes, the inability to produce/take into account any offline results is indeed a bug.
-
07:54 AM Bug #7946: 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- It may still be a bug though. The package is indeed gone from the server-side database but it's still installed local...
-
11:35 AM pfSense Packages Bug #7941 (Not a Bug): ntop-ng. Unable to reach web page
- This was an issue with the rules on that one system and not a problem with ntopng.
-
08:19 AM pfSense Packages Bug #7941 (Feedback): ntop-ng. Unable to reach web page
- I see those errors here but it appears they happen during install or boot when it gets stopped/started a couple times...
-
11:16 AM pfSense Packages Bug #7952 (Closed): OpenVPN export package for Windows flagged by a few AV's
- We have received a report that exported OpenVPN client package is flagged by a few AV's.
https://forum.pfsense.or... -
10:48 AM Revision e9bb33f3: Fix #7949
- Add UEFI 32 and UEFI 64 filenames defined inside a pool to dhcpd.conf
-
10:47 AM Revision 9d775c75: Fix #7949
- Add UEFI 32 and UEFI 64 filenames defined inside a pool to dhcpd.conf
-
09:40 AM Bug #7896 (Feedback): picture_widget.php
- Applied in changeset commit:dc91c9490a61c374b4358a3a328019f3e0e150ab.
-
09:10 AM Bug #7714: NTP Widget Time Display
- Applied in changeset commit:7f9b448ff7d926c4c5b69ada8625e728c3f5c715.
-
09:00 AM Bug #7714 (Feedback): NTP Widget Time Display
- Applied in changeset commit:893b609111be502233a7a4ad6804fff1e4779a03.
-
08:04 AM Bug #7940: disabling LAGG causes system reboot on 2.4
- That does look almost identical to #7119, we should check to see if those patches need any adjustments for FreeBSD 11.1.
-
07:54 AM Bug #7917: GUI shows "There are no packages currently installed" when repos are unreachable
- See also: #7946
-
07:40 AM Bug #7921 (Feedback): Reset All States on WAN IP Change does not stay unchecked when disabled in GUI
- Applied in changeset commit:5fce3e8e905c3a2029475293cf760ee2c2a51074.
-
07:38 AM Bug #7948 (Rejected): pfsense 2.4 fall in black screen on ESXI 6.5
- Please start a new thread on the forum with was much detail as possible. There is not enough to go by here, and some ...
-
01:12 AM Bug #7948 (Rejected): pfsense 2.4 fall in black screen on ESXI 6.5
- after upgrade from 2.3.4 pfsense periodically fall in black screen
you can enter letters from the keyboard, but th... -
07:22 AM pfSense Packages Bug #7950 (Feedback): Quagga not displaying status messages on 2.4-rel
- It's working fine here. Are all of the daemons running?
Does running one of the status commands at the CLI work?
<... -
06:59 AM pfSense Packages Bug #7950 (Closed): Quagga not displaying status messages on 2.4-rel
- See attached screenshot. Quagga is working but no status messages are displayed.
-
06:40 AM Bug #6860 (Feedback): Monitoring (RRD) graphs return "unknown" step value
- PR has been merged
-
06:20 AM pfSense Packages Bug #7935 (Feedback): FFR doesn't save prefix lists to bgpd.conf
- PR has been merged
-
06:00 AM Bug #7949 (Feedback): DHCP UEFI file name under pools are ignored
- Applied in changeset commit:9d775c7500e1ba09417e106f2ddc81b2cc8e67dc.
-
05:47 AM Bug #7949 (Resolved): DHCP UEFI file name under pools are ignored
- DHCP Server has places to define 3 files for netboot (BIOS, UEFI 32 and UEFI 64). When these options are configured i...
10/15/2017
-
11:54 PM Bug #7946: 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- Not a bug.
https://forum.pfsense.org/index.php?topic=133280.0 -
07:09 PM Bug #7946 (Resolved): 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- Upon upgrading to pfSense 2.4, I was unable to perform the recommended approach to move from freeradius 2.x to 3.x be...
-
11:00 PM pfSense Packages Bug #7947 (Rejected): freeRadius 3 on pfSense 2.4 not work
- Afrer upgrade pfsense to 2.4 and install freeradius v3 -- freeRadius not execute....
-
05:13 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- I don't see any mention about memory leaks here but this might be related.
https://forum.pfsense.org/index.php?topic... -
10:41 AM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Just found this bug report after chasing down the issue on my office's pfsense install that was upgraded to 2.4.
I... -
05:11 PM pfSense Packages Feature #7945 (Resolved): NET-SNMP - Flooding log entries
- Please make a better solution for the NET-SNMP logging. Currently it floods the Genereal Log Entries (System Logs / S...
-
03:44 PM pfSense Packages Bug #7944 (Resolved): Bind XMLRPC Sync Error
- After upgrading to pfsense 2.4.0 syncing Bind is not possible anymore. Each time I update the config I get the follow...
-
02:00 PM Feature #7943 (Resolved): Overflow scrolling for top navigation drop-down menus in Fixed mode
- Some resolutions (16:9 on laptops) don't have the vertical height to display all drop down menu items on items such a...
-
01:30 PM Bug #7942: QinQ interfaces never show as active
- ...
-
01:10 PM Bug #7942 (Resolved): QinQ interfaces never show as active
- In a fresh 2.4 install QinQ interfaces always show in Status > Interfaces as down even when the parent interface show...
-
12:52 PM pfSense Packages Bug #7941 (Not a Bug): ntop-ng. Unable to reach web page
- After installing and enabling ntop-ng with default settings in 2.4 it is not possible to reach the data display page ...
-
10:32 AM Bug #7937 (Assigned): FreeBSD 11 removed legacy ada aliases, some older installs will fail to mount root post-upgrade
- The code itself appears to work but it doesn't get triggered unless you start to run the upgrade from the CLI, stop w...
-
02:00 AM Revision c83649d3: Fix voucher test and expire pages. Fixes #7939
- (cherry picked from commit 0b2d15478ee375c5bb9bde82ac493e1ea38d2eb6)
-
02:00 AM Revision 0b2d1547: Fix voucher test and expire pages. Fixes #7939
-
01:40 AM Bug #7940 (Resolved): disabling LAGG causes system reboot on 2.4
- It looks very similar to this - https://redmine.pfsense.org/issues/7119
When Lagg interface goes down:
<6>carp:...
10/14/2017
-
09:10 PM Bug #7939 (Feedback): Voucher test page produces no output
- Applied in changeset commit:0b2d15478ee375c5bb9bde82ac493e1ea38d2eb6.
-
08:58 PM Bug #7939: Voucher test page produces no output
- Affects both status_captiveportal_test.php and status_captiveportal_expire.php
-
08:50 PM Bug #7939 (Resolved): Voucher test page produces no output
- The voucher test page does nothing when a value is submitted.
-
07:39 PM Revision ed66d491: snmpd, hostres cpu usage on virtual environments that have a virtual cd drive seems to happen on most (all?) hypervisors.
-
04:57 PM Feature #6754 (Duplicate): Use of aliases in OpenVPN configuration
- Duplicate of #2668
-
03:50 PM Feature #6754: Use of aliases in OpenVPN configuration
- Requested on forums also: https://forum.pfsense.org/index.php?topic=137852.0
-
03:49 PM Feature #2668: Support aliases in OpenVPN local/remote/tunnel network fields
- Requested on forums also: https://forum.pfsense.org/index.php?topic=137852.0
-
03:38 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Judging by some responses on the forum it can also happen on bare metal, not just VMs. The exact conditions are uncle...
-
02:44 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Please either fix the underlying issue if possible. Or at least commit this workaround that seems to be needed for mo...
-
11:20 AM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- No, it's not directly a Snort issue. It appears to be something that was perhaps inadvertently introduced when the t...
-
03:43 AM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Cheers guys, it does disapear after moving pfSense.mo pfSense.mo.old
So not a Snort issue then. -
07:59 AM Revision 0c9a6bc3: Remove obsolete CLA information
- https://www.netgate.com/blog/contributing-to-the-pfsense-project-gets-easier.html
-
07:04 AM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Michael OBrien wrote:
> Is there a reason you're moving this to 2.4.2, or you just need confirmation that it's good ... -
02:54 AM Revision c5a33683: Accept 'IP/mask' notation in 'Set interface IP address' from initial menu, there is no need to force use to enter the netmask in a different input.
-
02:13 AM Revision d326425e: Break from the loop when we run out of interfaces in console 'Assign Interfaces'.
-
12:31 AM Revision 286cd231: Mount the disk (the root slice) as read-only before running the fsck in the preen mode.
- This force the flush of all pending writes to disk and thus put the disk in a consistent state.
The second effect of...
10/13/2017
-
09:52 PM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Jim Pingle wrote:
> FYI- FRR is now available for 2.4, 2.3.5 (snapshots), and 2.3.4 users. Internal tests show that ... -
03:42 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Looks Like KVM has the same issue btw. I am running 2.4.1-DEVELOPMENT (amd64)
built on Fri Oct 13 12:32:36 CDT 2017... -
09:32 AM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- It looks like there is actually a patch for FreeBSD now which might help: https://bugs.freebsd.org/bugzilla/show_bug....
-
03:02 PM Bug #7931 (Duplicate): Error: SyntaxError: Unexpected token < in JSON at position 0
-
10:57 AM Bug #7931: Error: SyntaxError: Unexpected token < in JSON at position 0
- This one is actually a duplicate of Bug #6748 and I'm still seeing this randomly.
-
02:30 PM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Bill Meeks wrote:
> Andy Kniveton wrote:
> UPDATE- an empty string is the cause, now to find out why ???
>
> Bi... -
02:09 PM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Andy Kniveton wrote:
> Ah I don't have an Assigned Alias, so it displays the txt regardless of what ever the locale ... -
12:29 PM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Ah I don't have an Assigned Alias, so it displays the txt regardless of what ever the locale is set to.
Just creat... -
12:22 PM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- I've upgraded from 2.3.4-p1 to 2.4.0 and not changed the locale. it's using the default English I guess as I've not s...
-
10:23 AM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- I am so far unable to reproduce this problem in my virtual machine test environment. What language/locale is your fi...
-
09:46 AM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Thanks for the report. I will look into the problem.
Bill -
12:10 PM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- This is definitely due to a locking issue with file access in the index.php file for pfBlocker DNSBL. Not sure why it...
-
10:50 AM Bug #7748: VLAN Priority
- Hey, I'm one of those users thanks for putting this in the queue for 2.4.1.
I did a real quick tcpdump looking for... -
09:35 AM Bug #7748: VLAN Priority
- Apparently this negatively impacts users on Google Fiber
https://forum.pfsense.org/index.php?topic=137916.msg754579#... -
10:48 AM pfSense Packages Bug #7935: FFR doesn't save prefix lists to bgpd.conf
- There is a pending PR for this, https://github.com/pfsense/FreeBSD-ports/pull/417
We'll be reviewing PRs shortly n... -
10:44 AM Bug #7937 (Feedback): FreeBSD 11 removed legacy ada aliases, some older installs will fail to mount root post-upgrade
- pfSense-upgrade version 0.27_2 on 2.3.x and 0.34 on 2.4.x check for /dev/adN under /etc/fstab and call "/usr/local/sb...
-
07:50 AM Bug #7937 (Resolved): FreeBSD 11 removed legacy ada aliases, some older installs will fail to mount root post-upgrade
- Some upgrade attempts are failing to mount root after the kernel is upgraded to FreeBSD 11.x due to ada disk driver c...
-
10:43 AM Todo #7938 (Feedback): Change pfSense-upgrade to use pkg-static instead of pkg
- pfSense-upgrade version 0.27_2 on 2.3.x and 0.34 on 2.4.x are changed
-
09:16 AM Todo #7938 (Resolved): Change pfSense-upgrade to use pkg-static instead of pkg
- pfSense-upgrade should use pkg-static internally, rather than pkg, to avoid issues with major version upgrades, poten...
-
10:37 AM Feature #1557: Add the Interface descriptions to the OS interface descriptions
- Hi there,
This would be a great feature for those who use Zabbix or similar.
Thanks
Gareth -
09:12 AM Bug #7928: LAGG interfaces lose MAC address
- Can confirm, this is new behavior and I am able to duplicate it per Steve's steps at a client site. The secondary fir...
-
08:50 AM Bug #7925: VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- For reference, at least one person appears to have encountered it on ESX 5.5 as well, though the majority of users ar...
-
07:07 AM Bug #7936 (Confirmed): bridge network interface does not support altq on 2.4.0-RELEASE
- I thought we had another entry for bridge already but today I don't see it. So I reopened this and changed the subjec...
-
03:00 AM Bug #7916: There were error(s) loading the rules: pfctl: ix0: driver does not support altq - The line in question reads [0]: | Intel X520-DA2
- Same problem on 2.4.0!
-
01:22 AM Bug #4310: Limiters + HA results in hangs on secondary
- Sander Naudts wrote:
> Why not change target version to 2.9.9... sorry just little frustrating that this doesn't get...
10/12/2017
-
11:42 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- It should be noted that when upgrading, if the host resources MIB was already selected BEFORE the upgrade, it will re...
-
09:51 PM Bug #7936: bridge network interface does not support altq on 2.4.0-RELEASE
- That is true, but all interfaces assigned to bridge0 are igbx, will retest tomorrow
-
09:13 PM Bug #7936 (Rejected): bridge network interface does not support altq on 2.4.0-RELEASE
- bridge0 is not igbX.
-
09:07 PM Bug #7936 (Resolved): bridge network interface does not support altq on 2.4.0-RELEASE
- The bridge interface is currently not being built with altq support enabled. This leads to a situation where the user...
-
07:28 PM pfSense Packages Bug #7935 (Resolved): FFR doesn't save prefix lists to bgpd.conf
- Prefix lists referenced in route-maps or directly do not work with bgp when created using the webui. Have to copy the...
-
05:47 PM Bug #7925: VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- For information, the same problem occurs in Workstation 12.5.7 (build 5813279), vm hardware version 11.
It happened ... -
09:18 AM Bug #7925: VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- For anyone experiencing this crash in the meantime, adding @kern.vty=sc@ to @/boot/loader.conf.local@ is confirmed to...
-
04:38 PM Feature #7934: format support phone# for international use
- Assigned to sdavis. This is a server-side issue
-
04:10 PM Feature #7934 (New): format support phone# for international use
- In the new 2.4.0 release, the Netgate Services and Support dashboard gadget shows the phone# to call. (Good idea, bt...
- 03:00 PM Revision 855aab21: Merge branch 'master' into add-cloudns-to-dynamicdns
-
02:47 PM Feature #7643: Send notification when boot completed
- I also think that would be very useful function.
-
02:26 PM Bug #7933: There were error(s) loading the rules: pfctl: vtnet0: driver does not support altq - The line in question reads [0]:
- Doesn't make a difference, still the same bug on the same version. If it was closed, you might have a point but it's ...
-
02:23 PM Bug #7933: There were error(s) loading the rules: pfctl: vtnet0: driver does not support altq - The line in question reads [0]:
- Maybe, but the bugs remains on release 2.4.0-RELEASE (amd64), that was for 2.4 BETA and 2.4 RC.
-
02:18 PM Bug #7933 (Duplicate): There were error(s) loading the rules: pfctl: vtnet0: driver does not support altq - The line in question reads [0]:
- Duplicate of #7594
-
02:03 PM Bug #7933: There were error(s) loading the rules: pfctl: vtnet0: driver does not support altq - The line in question reads [0]:
- To let you now my configuration was working nice on 2.3.4-RELEASE-p1
-
02:01 PM Bug #7933 (Duplicate): There were error(s) loading the rules: pfctl: vtnet0: driver does not support altq - The line in question reads [0]:
- After a clean installation to have zfs filesystem, I restored my configuration, and there is no internet connection c...
-
02:19 PM Bug #4479: Firewall rules won't match GRE interface after applying IPSEC transport encryption on GRE tunnel
- Michael OBrien wrote:
> Any chance 2.4.0, with the FreeBSD 11.1 ipsec changes, may resolve this?
Just loaded up 2... -
12:03 PM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- https://forum.pfsense.org/index.php?topic=137921.0
-
12:02 PM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Please also post that in the IDS/IPS board of the forum so the package maintainer has a higher chance of seeing it:
... -
11:53 AM pfSense Packages Bug #7932 (Resolved): 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- The following appears under Assigned Alias header :-
Project-Id-Version: PACKAGE VERSION Report-Msgid-Bugs-To: POT... -
11:48 AM Bug #7931 (Not a Bug): Error: SyntaxError: Unexpected token < in JSON at position 0
- Most likely it was old/cached data in your browser and the refresh let it pick up new copies. We have added some prot...
-
11:46 AM Bug #7931: Error: SyntaxError: Unexpected token < in JSON at position 0
- After a refresh the error is gone btw
-
11:44 AM Bug #7931 (Duplicate): Error: SyntaxError: Unexpected token < in JSON at position 0
- After Upgrading to 2.4.0 this error is shown in the Traffic Graph Widget on the Dashboard
@Error: SyntaxError: Une... -
11:15 AM Feature #7930 (Rejected): Upgrade notification
- Sending an e-mail notification for that from the firewall itself isn't really a good idea. There are many other ways ...
-
11:13 AM Feature #7930 (Rejected): Upgrade notification
- It would be nice if there was some sort of alerting or notification when pfSense has a new upgrade available (via ema...
-
10:55 AM Bug #4310: Limiters + HA results in hangs on secondary
- We expected to have more time before 2.4.1 but we need to have it out in a week or so, there isn't time to get to thi...
-
10:53 AM Bug #4310: Limiters + HA results in hangs on secondary
- Why not change target version to 2.9.9... sorry just little frustrating that this doesn't get fixed.
-
10:36 AM Feature #7926: limit clog -f look-back size
- You'd be surprised, there are a number of them out there on CF, USB sticks and the like, and some of them have opted ...
-
10:33 AM Feature #7926: limit clog -f look-back size
- Thanks, Jim. That would be a perfectly acceptable solution, with a whole bunch of side benefits.
Especially since I... -
10:28 AM Bug #7786: traffic shaping queue on WAN wont allow total of all child to be 100%
- i think this requires some php code changes only as the web gui doesnt allow, the shaper itself is fine with it when ...
-
09:46 AM Bug #7786: traffic shaping queue on WAN wont allow total of all child to be 100%
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
10:23 AM Bug #7474 (Resolved): Problems adding gateway from interface edit
-
10:09 AM Bug #4031: Notifications mail bomb in some gateway failure circumstances
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
10:02 AM Bug #6420 (Resolved): Monitoring graphs last sample being zero
-
10:01 AM Feature #7823: Pull request: Add support for dynamic DNS provider ClouDNS
- conflict is fixed.
-
09:46 AM Feature #7823: Pull request: Add support for dynamic DNS provider ClouDNS
- The PR has conflicts that need resolved.
Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated. -
09:55 AM Bug #7079: ClamAV C-ICAP causing Kernel Panic and System Crash
- This should be re-tested on 2.4.0-RELEASE, the newer FreeBSD 11.1 base has a patch for that crash, I believe. Also it...
-
09:52 AM Bug #7213 (Feedback): Hyper-V install, no disk found
- Please retry this on 2.4.0-RELEASE which uses a FreeBSD 11.1 base and it has several fixes for Hyper-V.
-
09:51 AM Bug #7412: rtsold will not run on VLAN interfaces
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:51 AM Bug #7413: status_dhcpv6_leases.php: Some DHCPv6 leases are not displayed in the GUI
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:51 AM Bug #7425: dhclient not sending option 77
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:49 AM Bug #7439: IKE_SA (IKEv2) does not rekey on break before make startegy, just issues IKE_DELETE and connection is closed
- There is a new version of strongSwan on 2.4.0-RELEASE, please make this is still happening there.
Moving target to 2... -
09:48 AM Feature #7467: Add iPhone/Android/Generic USB tethering support
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:48 AM Bug #7469: local_sync_accounts() slowness can trigger GUI/XMLRPC failures with many accounts
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:47 AM Bug #7480: pkg framework - textarea on rowhelperfield errors
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:47 AM Bug #7481: pkg-framework - rowhelper ignores <advancedfield/>
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:47 AM Bug #7532: SG-1000 autonegotiation 10baseT speed and duplex
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:47 AM Bug #7605: State Killing on Gateway Success
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:47 AM Feature #7623: Allow L2TP user passwords to contain special characters
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Bug #7714: NTP Widget Time Display
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Todo #7762: Add uid check to pfSense-upgrade and exit unless it is run as uid=0
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Bug #7774: No TCP Reply State Established on GRE in IPsec Transport
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Bug #7801: UDP fragments received over IPsec tunnel are not properly reassembled and forwarded
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Bug #7856: IPsec status does not show all connected mobile clients
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Feature #7882: Seperator feature in DHCP Static mapping for this feature
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Bug #7885: Cert. Manager should validate EKUs on importing a certificate authority
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
09:46 AM Bug #7905: OpenVPN Authentication Against Backend Stalls All Server Traffic
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
06:31 AM Feature #7321 (Resolved): DynDNS - Add DreamHost DNS support
-
01:43 AM Bug #7929 (Resolved): IPSec CA certificate name corrupt if multiple RDNs of the same type are in subject name
- When the CA certificate subject is converted to OSF style, but multiple RDN components of the same type are in the su...
10/11/2017
-
07:27 PM Feature #7321: DynDNS - Add DreamHost DNS support
- OK - I do see that it made it into the 2.4.0 Git branch. I didn't see it listed at https://redmine.pfsense.org/versi...
-
06:08 PM Bug #7928 (Resolved): LAGG interfaces lose MAC address
- LAGG interfaces lose their MAC address, normally inherited from the first member, if all links are disconnected and t...
-
03:03 PM Bug #7927 (Closed): (filterdns), uid 0: exited on signal 11 (core dumped)
- #Problem:
With 2.4, and also with 2.4.1, I am seeing frequent error messages
> kernel: pid 12918 (filterdns),... -
02:21 PM Bug #7015: IPsec not working behind NAT
- The problem I reported above occurs when the Phase 2 IPv6 Tunnel "Local Network" is set to "LAN subnet", and therefor...
-
12:57 PM Feature #7926: limit clog -f look-back size
- The way clog reads the records it has to figure out where the start is and then unwind it from there, so it doesn't e...
-
12:47 PM Feature #7926: limit clog -f look-back size
- FWIW, I'm thinking of "tail -f"'s behaviour, where it only tail's the last ~10 lines (I think most implementations de...
-
12:44 PM Feature #7926 (Closed): limit clog -f look-back size
- I've configured the system log files to be substantially larger than normal, in order to get some reasonable retentio...
-
12:51 PM Bug #7925 (Feedback): VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- The fix is already merge and will be available on next snapshot.
-
09:21 AM Bug #7925 (Resolved): VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- Some users occasionally encounter a panic during OS hardware detection on 2.4 running under ESXi 6.5.0 U1 (Build 6765...
-
12:24 PM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- If it's happening on 2.4.0 and started around that time, it's likely related to the FreeBSD 11.1 change and not the I...
-
10:53 AM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- Jim Pingle wrote:
> The affected code was on 2.4.0 for a couple days but is no longer there now. Current 2.4.0-RC sn... -
10:35 AM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- The affected code was on 2.4.0 for a couple days but is no longer there now. Current 2.4.0-RC snapshots and the actua...
-
10:28 AM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- Jim Pingle wrote:
> At the moment, the only change in 2.4.1 that isn't in 2.4.0 that might be relevant is #7856
>
... -
07:13 AM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- At the moment, the only change in 2.4.1 that isn't in 2.4.0 that might be relevant is #7856
And since we already k... -
06:21 AM pfSense Packages Bug #7923 (Resolved): 502 Bad Gateway and unresponsive OS with 2.4
- Multiple users complaining that following the infamous 502 Bad Gateway, they eventually are unable to do anything wit...
-
08:36 AM Bug #7924 (Rejected): DHCP Server fails to start after updating to 2.4.0.r.20171009.1758
- You must have upgraded to a snapshot that was broken before that one. You'll need to fix your local installation manu...
-
08:29 AM Bug #7924 (Rejected): DHCP Server fails to start after updating to 2.4.0.r.20171009.1758
- After upgrading to 2.4.0.r.20171009.1758, the DHCP server fails with the following error message:
Can't attach int... -
07:17 AM Bug #7856 (Assigned): IPsec status does not show all connected mobile clients
- It looks like this change caused a regression, see #7923
Also one person on the forum reported that the status bre... -
02:21 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- I can confirm that my issue has been fixed (Altibox Norway ISP). Thank you very much!
-
12:41 AM Revision 8239af2d: xmlrpc, webgui, prevent that a xmlrpc.lock is placed that is never unlocked, thus hanging php and the webgui after a few more sync request are trying to acquire the lock and all are waiting..
10/10/2017
-
06:36 PM Feature #7922 (New): Add the option to select the ISP IPv6 Delegated Prefix as a destination in firewall rules
- It would be useful to have the option to use the ISP delegated prefix (/48, /56, etc) from DHCPv6-PD as a destination...
-
06:13 PM Bug #7921: Reset All States on WAN IP Change does not stay unchecked when disabled in GUI
- Current Base System 2.4.0.r.20171009.1800
-
06:12 PM Bug #7921 (Resolved): Reset All States on WAN IP Change does not stay unchecked when disabled in GUI
- Under System > Advanced > Networking, the new option to reset all sates when a WAN IP changes does not stay unchecked...
-
10:55 AM Revision 4183c042: Add new repos to lead users to 2.4.0 on amd64
-
10:50 AM Revision de2312f5: Welcome 2.4.0-RELEASE again. This time based on FreeBSD 11.1
-
10:47 AM Revision 9615f091: Update translation files
-
10:47 AM Revision 8a5ca070: Regenerate pot
-
10:40 AM Revision 2448d0fc: Update translation files
-
10:36 AM Revision ac9e9abb: Regenerate pot
-
07:17 AM Revision 10085279: Add filtering to pfTop page
-
05:22 AM Bug #7779: Traffic crossing a site-to-site OpenVPN tunnel fails to fragment.
- We were able to disprove the situation with OpenVPN disabled. The initial description still holds.
-
05:15 AM Bug #7920 (Not a Bug): Logos Missing and wrong size
-
03:20 AM Bug #7920: Logos Missing and wrong size
- Resolved
Browser cache... duh! -
02:43 AM Bug #7920: Logos Missing and wrong size
- Forgot to add this is on 2.4.1.a.20171009.1853
-
02:42 AM Bug #7920 (Not a Bug): Logos Missing and wrong size
- pfSense logo is the wrong size on the login screen, appears far too large. It's missing completely from the other pag...
-
04:15 AM Bug #7841: CARP Sync Issue - when no internet on standby
- Hi Jim,
I had the same issue when using a PfSense cluster with CARP with a /32 Public IP Allocation. I think lot o...
10/09/2017
-
10:51 PM Revision fd47fb02: Remove old custom logos
-
10:51 PM Revision 06a1b081: Remove old custom logos
-
10:43 PM Revision f9a6637a: Use include() to add logo content and use complete path
-
10:43 PM Revision fe8922b8: Use include() to add logo content and use complete path
-
10:36 PM Revision 4c072afb: update NYI logos
-
10:36 PM Revision 6244dca8: update svg logos to pull from file
-
08:55 PM Revision f2fd97c8: update NYI logos
-
08:46 PM Revision 9ae8ade5: update svg logos to pull from file
-
08:38 PM Revision 71e01ef0: Update obsoleted files list for 2.4
-
08:38 PM Revision f0d9e40e: Update obsoleted files list for 2.4
-
08:05 PM Revision 32fb158e: Custom logo is a svg and a css files now
-
08:05 PM Revision c8735982: Custom logo is a svg and a css files now
-
06:56 PM Revision e3acd13d: Do not reset SKIP_FINAL_RSYNC, it can make things to go to undesired place
-
06:56 PM Revision d01d2e79: Do not reset SKIP_FINAL_RSYNC, it can make things to go to undesired place
-
06:56 PM Revision 6c6c5b31: Do not reset SKIP_FINAL_RSYNC, it can make things to go to undesired place
-
06:56 PM Revision f19faa6d: Do not reset SKIP_FINAL_RSYNC, it can make things to go to undesired place
-
03:17 PM Revision 2d32e50b: Disable ARJ option
-
03:17 PM Revision 45b84395: Disable ARJ option
-
01:47 PM Bug #7919 (Resolved): Logging not working
- Luiz pushed some fixes to clog to correct this, next new snapshot we're testing internally is good.
-
10:55 AM Bug #7919: Logging not working
- https://forum.pfsense.org/index.php?topic=137672.msg752928#msg752928
-
08:40 AM Bug #7919: Logging not working
- It's also possible syslogd is writing bad data to the file which breaks the clog format, so maybe the syslogd clog pa...
-
08:38 AM Bug #7919 (Confirmed): Logging not working
- It looks like clog is failing to recognize its own file header somehow....
-
08:36 AM Bug #7919 (Resolved): Logging not working
- On new installs logging is failing with:...
-
12:49 PM Bug #4479: Firewall rules won't match GRE interface after applying IPSEC transport encryption on GRE tunnel
- Any chance 2.4.0, with the FreeBSD 11.1 ipsec changes, may resolve this?
-
11:39 AM Bug #7907: Cannot edit IPv4 and IPv6 Local Networks after tunnel creation
- You can open a new bug report for that with an appropriate title/description, rather than re-using this one which was...
-
10:30 AM Revision 39d413fa: Remove grub2-bhyve for now
-
10:30 AM Revision 07998395: Remove grub2-bhyve for now
-
09:38 AM Bug #7015: IPsec not working behind NAT
- I’m still seeing problems with IPv6 tunneling over an IPv4 IPsec connection, but the symptoms are different from what...
-
04:07 AM Bug #7917: GUI shows "There are no packages currently installed" when repos are unreachable
- Stephane Debreuil wrote:
> Same issue. It appears after upgrade to 2.4.0.r.20171007.0850 (from 2.4.0.r.20171004.xxxx... -
01:57 AM Bug #7917: GUI shows "There are no packages currently installed" when repos are unreachable
- Same issue. It appears after upgrade to 2.4.0.r.20171007.0850 (from 2.4.0.r.20171004.xxxx).
-
03:32 AM Bug #7918 (Not a Bug): Nightly error reloading rules
- A while ago, I started getting the same notice in my logs every night at the same time. Most of my external servers r...
10/08/2017
-
11:14 PM Bug #7907: Cannot edit IPv4 and IPv6 Local Networks after tunnel creation
- I figured out what the issue is. When "redirect gateway" option is checked the fields for local networks are hidden,...
-
06:44 PM Revision 75cc9f81: Remove grub2-bhyve for now
-
06:44 PM Revision 9ce60a31: Remove grub2-bhyve for now
-
05:33 PM Bug #6852: Commit 8f86722 breaks DHCPv6 leases status page
- Duplicate of Bug #7413
-
04:59 PM Bug #7917 (Resolved): GUI shows "There are no packages currently installed" when repos are unreachable
- !https://image.prntscr.com/image/O75ZDOwbT8KKiypUxRhaWQ.png!...
-
03:36 PM Bug #7413: status_dhcpv6_leases.php: Some DHCPv6 leases are not displayed in the GUI
- Jim Pingle wrote:
> I agree, but last I looked OMAPI didn't quite do everything we need. ... That may have changed ... -
02:17 PM Bug #7413: status_dhcpv6_leases.php: Some DHCPv6 leases are not displayed in the GUI
- I agree, but last I looked OMAPI didn't quite do everything we need, plus it required making a program in C to interf...
-
02:04 PM Bug #7413: status_dhcpv6_leases.php: Some DHCPv6 leases are not displayed in the GUI
- Am I the only one thinking that this absolutely unreadable regex madness needs to go to /dev/null and ISC DHCP server...
-
10:54 AM Feature #7814: Unbound serve-expired please add to GU as tickbox
- yeah I should have updated, martin did the work.
-
05:45 AM Feature #7814: Unbound serve-expired please add to GU as tickbox
- https://github.com/pfsense/pfsense/pull/3817
-
10:44 AM Feature #7321: DynDNS - Add DreamHost DNS support
- Frank Gruman wrote:
> I'm pretty interested in finally seeing this delivered. The pull request was accepted into ma... -
08:36 AM Bug #6420: Monitoring graphs last sample being zero
- Been fixed with https://github.com/pfsense/FreeBSD-ports/commit/5b20ed3661e6dc6d8b8d3c78aab5784556cc0dc3 almost a yea...
-
05:15 AM Bug #6848: Do not create an IPv4/6 gateway for an interface without according IPv4/6 address
- Related forum discussion and PR:
https://forum.pfsense.org/index.php?topic=137317.0
https://github.com/pfsense/pfse... -
04:55 AM Bug #6860: Monitoring (RRD) graphs return "unknown" step value
- Jared Dillard wrote:
> Needs step 1800 added: https://forum.pfsense.org/index.php?topic=117036.msg695224#msg695224
...
10/07/2017
-
05:20 PM Bug #7916: There were error(s) loading the rules: pfctl: ix0: driver does not support altq - The line in question reads [0]: | Intel X520-DA2
- Please try a recent 2.4 snapshot.
-
04:59 PM Bug #7916 (Duplicate): There were error(s) loading the rules: pfctl: ix0: driver does not support altq - The line in question reads [0]: | Intel X520-DA2
- Today i installed a new pfSense Firewall with an Intel X520-DA2 10GB Adapter. After setup the traffic shaper i got th...
-
03:17 PM Bug #7913 (Resolved): Applying wizard for creating Traffic Shapers with PRIQ and Prioritize VoIP traffic doesn't create qVoIP and Floating Rule
- Fixed in current snapshots
-
01:49 PM Revision 8b69a5b0: Update pfsense small logo
-
01:49 PM Revision 869d86b0: Update pfsense small logo
-
01:48 PM Revision be50d028: Update pfsense small logo
-
01:48 PM Revision 01318817: Update pfsense small logo
10/06/2017
-
11:17 PM Bug #7915 (Resolved): CBQ Child queue set bandwidth does not apply correctly
- Example:
LAN interface -> create 2 direct children qLink for the local traffic then qInternet that will house more c... -
11:03 PM Bug #7645: SG-1000 VLAN interfaces do not work without promisc mode
- Confirmed. VLANs are functional again on the latest snapshot without needing to use promisc mode.
-
08:03 PM Bug #7645: SG-1000 VLAN interfaces do not work without promisc mode
- Fixed in the latest snapshot.
-
09:41 AM Bug #7645: SG-1000 VLAN interfaces do not work without promisc mode
- Upgraded to latest release candidate
2.4.0-RC (arm)
built on Thu Oct 05 21:17:11 CDT 2017
FreeBSD 11.1-RELEASE-p... -
09:18 PM Feature #7321: DynDNS - Add DreamHost DNS support
- I'm pretty interested in finally seeing this delivered. The pull request was accepted into master 5 months ago. Is ...
-
08:07 PM Bug #7015: IPsec not working behind NAT
- Please re-test with a recent 2.4.0-RC image based on FreeBSD 11.1.
There are significant improvements in this area... -
05:06 PM Revision 05c41986: If ECL picks up a config on the first boot post-install, trigger a package sync and don't run the wizard.
- (cherry picked from commit 695f7d5c054b7df724ea4fd6883a29a2da60cca5)
(cherry picked from commit 661c5b7f6a80e9a281939... -
05:06 PM Revision 7d9248c1: If ECL picks up a config on the first boot post-install, trigger a package sync and don't run the wizard.
- (cherry picked from commit 695f7d5c054b7df724ea4fd6883a29a2da60cca5)
(cherry picked from commit 661c5b7f6a80e9a281939... -
05:06 PM Revision 661c5b7f: If ECL picks up a config on the first boot post-install, trigger a package sync and don't run the wizard.
- (cherry picked from commit 695f7d5c054b7df724ea4fd6883a29a2da60cca5)
-
05:06 PM Revision 695f7d5c: If ECL picks up a config on the first boot post-install, trigger a package sync and don't run the wizard.
-
03:44 PM Bug #7914 (Resolved): External Config Locator does not trigger a package sync or clear the wizard, so it does not result in a functional and expected restore
- Restoring a configuration via the External Config Locator (ECL) does not trigger a package sync, so if the restore co...
-
01:53 PM Revision e94ca10f: Unbreak PRIQ queue creation for VoIP, Penalty Box, and P2P options. Fixes #7913
- (cherry picked from commit 10e93284be3cd62fe871710205e61de0e36dcc2f)
-
01:52 PM Revision 10e93284: Unbreak PRIQ queue creation for VoIP, Penalty Box, and P2P options. Fixes #7913
-
11:42 AM Revision fed79d56: Update translation files
-
11:42 AM Revision 8484fbab: Regenerate pot
-
11:30 AM Revision 9c33d1b7: Update translation files
-
11:25 AM Revision 12b2aa0b: Regenerate pot
-
09:00 AM Bug #7913 (Feedback): Applying wizard for creating Traffic Shapers with PRIQ and Prioritize VoIP traffic doesn't create qVoIP and Floating Rule
- Applied in changeset commit:10e93284be3cd62fe871710205e61de0e36dcc2f.
-
08:58 AM Bug #7913: Applying wizard for creating Traffic Shapers with PRIQ and Prioritize VoIP traffic doesn't create qVoIP and Floating Rule
- This was caused by commit:7798eb1e6ac48963a2785b449306cb49c942381f - I just pushed a fix that changes the tests a bit...
-
08:22 AM Bug #7913 (Resolved): Applying wizard for creating Traffic Shapers with PRIQ and Prioritize VoIP traffic doesn't create qVoIP and Floating Rule
- For 2.3.4_p1 traffic shaper wizard with PRIQ and enabling VoIP creates qVoIP and Floating Rule
pfctl -sa ALTQ:
queu... -
03:47 AM Revision 4f62b7c0: Don't create vestigial gateways, alt. approach
10/05/2017
-
01:35 PM Revision 4120969b: Simplify logic
-
01:35 PM Revision 101a3d62: Simplify logic
-
01:27 PM Revision fa3208ee: Sort pfSense.obsoletedfiles
-
01:27 PM Revision 31c8b40b: Only show copynotice when version changes
-
01:25 PM Revision 9389398b: Sort pfSense.obsoletedfiles
-
01:25 PM Revision 5e3d8bf1: Only show copynotice when version changes
-
05:22 AM Bug #7912 (Resolved): LDAP Test Results modal doesn't comply with theming
- Under "System > User Manager > Settings > Save & Test", there are sections that seem to only partially comply with th...
10/04/2017
-
01:49 PM Todo #7911: Suricata missing dropsid sample file in SID Mgmt
- Dan Collins wrote:
> Try a fresh install and none of the sample files are there.
That did not work, they are stil... -
01:21 PM Todo #7911: Suricata missing dropsid sample file in SID Mgmt
- Try a fresh install and none of the sample files are there.
-
01:13 PM Todo #7911 (Rejected): Suricata missing dropsid sample file in SID Mgmt
-
01:11 PM Todo #7911: Suricata missing dropsid sample file in SID Mgmt
- Not really.
!https://image.prntscr.com/image/3cJ2VqXiSTmxQxOSiBZEDw.png!
Please post to the forums until you ha... -
11:56 AM Todo #7911 (Rejected): Suricata missing dropsid sample file in SID Mgmt
- Suricata - sample dropsid_sample.conf file no longer included in SID Mgmt files.
-
11:52 AM Feature #7910 (Duplicate): Notification GUI
- I would like to see a GUI showing a list of alerts and the ability to turn them on/off from sending email.
-
10:15 AM Bug #7629 (Resolved): FreeBSD PR affecting pfsense
- Moving target to 2.4.0 as this appears to be fixed by FreeBSD 11.1, which is now used by 2.4.0
-
10:10 AM Bug #7839: IPv6 ICMPv6 Type 3 Code 0 (hop limit exceeded in transit) reply uses wrong address.
- Moving target to 2.4.0 as this appears to be fixed by FreeBSD 11.1, which is now used by 2.4.0
-
07:53 AM Bug #7825: missing "BACKUP" in CARP status with IPv6
- I just tried this again and the procedure you list still doesn't result in the same outcome here. Try it again on 2.4...
-
07:52 AM Bug #7909 (Duplicate): XMLRPC: missing "BACKUP" in CARP status with IPv6
- Duplicate of #7825
Don't open a duplicate bug, the other one is still open, just in a feedback state. -
01:45 AM Bug #7909 (Duplicate): XMLRPC: missing "BACKUP" in CARP status with IPv6
- Hi everyone,
as i am not able to reopen the ticket #7825 -- here we go again ;)
The descriptive text ("BACKUP") n...
10/03/2017
-
10:49 PM Revision 807160e9: VirtualIP, FIX, VIPs should have a <uniqueid> property inside the config.xml, however if they are added as 'proxy-arp' or 'other' and then modified to ipalias or carp, the uniqueid stays empty.
-
06:49 PM Feature #7904: Automatic Bandwidth Limiter on Dummynet
- Thanks Jim(s) ;)
A bounty has been created for this project to be completed and submitted to be added to pfSense. ... -
06:23 PM Revision 962faafa: Make devel repo point to 2.4.0 as well
-
03:35 PM Revision c604b571: Fix PPP log reference in status.php
- (cherry picked from commit 35e5c404ef0d03d40eeac7f5a33f43da0d3ac6fc)
(cherry picked from commit 69ed1107fac3c256695d9... -
03:35 PM Revision e9ec739b: Fix PPP log reference in status.php
- (cherry picked from commit 35e5c404ef0d03d40eeac7f5a33f43da0d3ac6fc)
(cherry picked from commit 69ed1107fac3c256695d9... -
03:35 PM Revision 69ed1107: Fix PPP log reference in status.php
- (cherry picked from commit 35e5c404ef0d03d40eeac7f5a33f43da0d3ac6fc)
-
03:34 PM Revision 35e5c404: Fix PPP log reference in status.php
-
09:23 AM Bug #7908: "Kill filtered states" button has no effect
- Yes, unless you are killing states from a serial or VGA console, your own IP address will always show up as you're co...
-
09:20 AM Bug #7908: "Kill filtered states" button has no effect
- Erm, eh... you'll need to NOT refresh... like, you are recreating those states when you refresh the page.
-
09:06 AM Bug #7908: "Kill filtered states" button has no effect
- There is my own IP address in the box.
Effectively, if I specify another IP address, it works. But not with my own. -
08:46 AM Bug #7908 (Rejected): "Kill filtered states" button has no effect
- What exactly did you have in the box? It only kills properly if you enter an IP address or subnet. The description ma...
-
08:35 AM Bug #7908 (Rejected): "Kill filtered states" button has no effect
- In pfsense 2.4.0-RC, when I attempt to kill states using the "Kill filtered states" button in the Diagnostics / State...
10/02/2017
-
11:13 PM Revision 28837c4d: Fix path
-
11:12 PM Revision f2daa63c: Fix path
-
07:11 PM Revision 3d90abca: Revert "Welcome pfSense 2.4.0-RELEASE"
- This reverts commit b6d433fdfc25b404693b85e9086d716db7d76460.
-
07:05 PM Revision 388b6303: Revert "Add new repos to lead users to 2.4.0 on amd64"
- This reverts commit 42eecfeff0f6c1326a7dd7669cb48a7eccead0a6.
-
04:52 PM Revision 42eecfef: Add new repos to lead users to 2.4.0 on amd64
-
12:27 PM Bug #7907 (Not a Bug): Cannot edit IPv4 and IPv6 Local Networks after tunnel creation
- I can't reproduce anything like that here. The fields show up when editing existing tunnels that can push. Perhaps th...
-
11:57 AM Bug #7907 (Not a Bug): Cannot edit IPv4 and IPv6 Local Networks after tunnel creation
- IPv4 and IPv6 Local Networks may be specified when tunnel is created but is not exposed when editing existing tunnel ...
-
10:26 AM Bug #7754 (Not a Bug): Cannot access "WebCfg - OpenVPN: Client Export Utility" without also granting access to "WebCfg - OpenVPN: Servers"
- It's working as designed. The export package has no menu entry, so they can't see any menu entry for it.
Users wil... -
10:25 AM Bug #7754: Cannot access "WebCfg - OpenVPN: Client Export Utility" without also granting access to "WebCfg - OpenVPN: Servers"
- tqwqllrm tqwqllrm wrote:
> I tried to create a local group for admins with limited access and I only want that group... -
08:15 AM Bug #7906: Dashboard Version Info Inconsistency
- I'll post on the forum then, but it's still a bug, if perhaps one of a different color: the GUI System Update reporte...
-
08:08 AM Bug #7906 (Not a Bug): Dashboard Version Info Inconsistency
- Some component failed in your upgrade. Please post on the forum, mailing list, or reddit and someone can help you get...
-
08:07 AM Bug #7906: Dashboard Version Info Inconsistency
- Apologies, please disregard my original dashboard screenshot, I unintentionally captured it while it was still displa...
-
08:04 AM Bug #7906 (Not a Bug): Dashboard Version Info Inconsistency
- I was previously running pfSense-CE-2.3.3-RELEASE-4g-i386-nanobsd and used System Update from the GUI to upgrade to 2...
-
07:59 AM Bug #7905: OpenVPN Authentication Against Backend Stalls All Server Traffic
- Looks like it's a known issue with the nature of auth-user-pass-verify that OpenVPN does not plan to address: https:/...
-
03:54 AM pfSense Packages Feature #7895: Add a script for CARP monitoring to NRPE
- Little fix, the current plugin did not set the return code upon exiting.
10/01/2017
-
05:29 PM Feature #7904 (Needs Patch): Automatic Bandwidth Limiter on Dummynet
- It's possible in some specific circumstances, but I don't see one of those being a way that would work properly with ...
-
12:00 PM Feature #7904: Automatic Bandwidth Limiter on Dummynet
- Thanks Jim!
I really think this would be a highlight feature for pfSense.
It would be very effective traffic ... -
11:22 AM Feature #7904: Automatic Bandwidth Limiter on Dummynet
- Actually, it seems completely possible. Van Jacobson’s “pathchar” showed so 20 years ago.
https://www.caida.org/t... -
11:03 AM Feature #7904: Automatic Bandwidth Limiter on Dummynet
- The idea isn't to use a speedtest.net to monitor actual bandwidth, but to monitor ping latency to see if the dummynet...
-
10:49 AM Feature #7904 (Rejected): Automatic Bandwidth Limiter on Dummynet
- It's not possible. The firewall has no way to determine the actual circuit speed, it must be set manually. A speed te...
-
09:33 AM Feature #7904 (Needs Patch): Automatic Bandwidth Limiter on Dummynet
- Add an automatic bandwidth limiter to pfSense that dynamically limits Down and Up speeds on WAN based on latency in o...
-
04:13 PM Bug #7905 (Resolved): OpenVPN Authentication Against Backend Stalls All Server Traffic
- When authenticating an OpenVPN Remote Access server against an authentication backend such as RADIUS, all traffic on ...
09/30/2017
-
10:53 AM pfSense Packages Feature #7903 (New): Duo ssh package
- When trying to compile the Duo ssh package I get errors. After fixing these, I cannot get the sshd configs to stick o...
-
08:23 AM Feature #7881: OpenVPN client - add support for multiple server entries
- Brendon Baumgartner wrote:
> I think to implement this is by setting the server to Other towards the top and leaving... -
02:00 AM Feature #7881: OpenVPN client - add support for multiple server entries
- I think to implement this is by setting the server to Other towards the top and leaving the field blank. Then using t...
-
04:45 AM pfSense Packages Bug #6129: zabbix agent/proxy 2.4 not ported to pfSense 2.3
- Brendon Baumgartner wrote:
> Zabbix proxies have to match the version of the Zabbix server so just supporting LTS he... -
02:02 AM pfSense Packages Bug #6129: zabbix agent/proxy 2.4 not ported to pfSense 2.3
- Zabbix agents can be any version.
Zabbix proxies have to match the version of the Zabbix server so just supporting...
09/29/2017
-
09:44 PM Revision b7a91a4d: Fix path
-
09:43 PM Revision e3998059: Fix path
-
07:44 PM Revision 433a54ed: Send RELEASE to internal server
-
07:44 PM Revision 6a3df338: Send RELEASE to internal server
-
05:51 PM Revision b6d433fd: Welcome pfSense 2.4.0-RELEASE
-
02:15 PM pfSense Packages Feature #7902 (New): allow vpn client export of other to be a blank field
- Under: OpenVPN -> Client Export -> Host Name Resolution -> Other
The Host Name field that appears requires a valu... -
11:51 AM pfSense Packages Bug #7729 (Resolved): pfBlockerNG orders NAT licked rules to the bottom of firewall rules
-
11:34 AM pfSense Packages Bug #7729: pfBlockerNG orders NAT licked rules to the bottom of firewall rules
- Merged and fixed since 2.1.1_9
-
10:12 AM Bug #4723 (Resolved): Can't forward UDP fragmented packets with scrubbing enabled.
- Thanks!
-
09:57 AM Bug #4723: Can't forward UDP fragmented packets with scrubbing enabled.
- I made the lab in order to reproduce the issue. But could not reproduce one.
I tried to use 2KB frames, and the fram... -
10:04 AM pfSense Packages Bug #7893: Kernel Panic Suricata Inline
- Additional warning text has been added to the Group Help displayed in the Blocking Mode section of the INTERFACE SETT...
-
10:01 AM Bug #7592 (Resolved): SG-1000: Unbound not always restarting properly after changes in /etc/hosts
-
06:28 AM Bug #7592: SG-1000: Unbound not always restarting properly after changes in /etc/hosts
- I found there are error messages in logs, but I can see unbound works fine on latest FW on sg1000
Error messages a... -
10:00 AM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Pull requests have been submitted for removing the use of the <no_drop_down> tag on the SYNC tab in both the Snort an...
-
08:57 AM Bug #7901 (Rejected): Cannot Import Valid SSL Certificate with Private Key
- That message means the public key on the certificate does not match the public key stored with the private key. Post ...
-
08:41 AM Bug #7901 (Rejected): Cannot Import Valid SSL Certificate with Private Key
- I have a wildcard SSL certificate from a vendor using my own private key. This wildcard SSL certificate was successfu...
-
08:28 AM Bug #7900 (Not a Bug): DynamicDNS Amazon Route53 Not Working
-
06:39 AM Bug #7900: DynamicDNS Amazon Route53 Not Working
- It looks like the settings for the HostZonedID input were changed (previously needed to specify a region and hosted z...
-
06:15 AM Bug #7900 (Not a Bug): DynamicDNS Amazon Route53 Not Working
- DynamicDNS Provider Route53 is not updating. Despite the failure, the error detection code doesn't catch that a failu...
-
07:06 AM Bug #7272 (Resolved): 6rd not functioning on 2.4.0-BETA
- Looks like the main problem here is fixed. If any specific problem is found, please open a new ticket with details
-
07:05 AM Bug #7719 (Resolved): Dynamic DNS updates not working on interface failover
- Works
-
07:05 AM Bug #7750 (Resolved): unbound refuses ipv6 queries after reboot
- Works
09/28/2017
- 04:54 PM Revision de5c66b5: Add copyright notice to dashboard page (but only once per upgrade)
- (cherry picked from commit f3c5f4c57362a893868976054c00dd7d9f37e721)
-
04:38 PM Revision c731797d: Set kern.cam.boot_delay=10000 on target systems installed using memstick or ISO
-
04:38 PM Revision 286ec1c7: Set kern.cam.boot_delay=10000 on target systems installed using memstick or ISO
-
02:28 PM Revision c56630d7: Increase reserved space for loader/boot to 128Kb to make 8Gb disk size to fit
-
02:28 PM Revision 1b30618f: Default config packages need to have vital flag set too
-
02:27 PM Revision 0968ca43: Increase reserved space for loader/boot to 128Kb to make 8Gb disk size to fit
-
01:31 PM Revision 401e2ac7: Remove no-op code
- See https://redmine.pfsense.org/issues/7889 for related discussion
-
01:26 PM Revision cbbb8fdb: Remove no-op code
- See https://redmine.pfsense.org/issues/7889 for related discussion
- 12:49 PM Revision 5f63cb40: Fixed #7889
- Increase max number of characters allowed in a tab array to 256 to prevent automatic conversion to pull-down
-
09:16 AM Bug #7899: a floating 'match' rule on LAN does not put traffic from a broswer on a clientpc into a shaper queue
- Note, I was using PRIQ.
-
09:16 AM Bug #7899 (New): a floating 'match' rule on LAN does not put traffic from a broswer on a clientpc into a shaper queue
- Seeing bug 7116 (https://redmine.pfsense.org/issues/7116) again with squid and any other traffic originating from the...
-
09:13 AM Bug #7116: a floating 'match' rule on LAN does not put traffic from a broswer on a clientpc into a shaper queue
- Seeing bug 7116 again with squid and any other traffic originating from the firewall. Cannot place it into any kind ...
-
09:13 AM Bug #7272 (Feedback): 6rd not functioning on 2.4.0-BETA
- We will keep an eye on this issue, for now it seems to be working.
Thanks everybody. -
08:32 AM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Steve Beaver wrote:
> Yes; it should be nuked. I'd like to wait until after the 2.4 release before doing that, howev... -
08:22 AM Bug #7889 (Resolved): The dropdown tabs replacement fallback needs to be limited to certain pages
-
08:22 AM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Yes; it should be nuked. I'd like to wait until after the 2.4 release before doing that, however.
-
08:18 AM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- That works (for the pkg.php/pkg_edit.php as well) provided the limit stays high-enough.
Should the no-op no_drop_... -
08:00 AM Bug #7889 (Feedback): The dropdown tabs replacement fallback needs to be limited to certain pages
- Applied in changeset commit:5f63cb40ca75f055f85427e78d9e2348b65b05c4.
-
07:17 AM Bug #7898: PFsense 2.4 RC 9/28/17 update - Traffic Shaper HFSC Priority field missing
- It was removed deliberately as a part of PR https://github.com/pfsense/pfsense/pull/3795 but in #1994 luiz says HFSC ...
-
05:05 AM Bug #7898: PFsense 2.4 RC 9/28/17 update - Traffic Shaper HFSC Priority field missing
- thats because HFSC doesnt use priorities
-
07:09 AM pfSense Packages Bug #7716 (Resolved): Suricata - Barnyard2 webui configuration updates result in base64-encoded value written to the config for the password
-
03:21 AM pfSense Packages Bug #7716: Suricata - Barnyard2 webui configuration updates result in base64-encoded value written to the config for the password
- Fixed.
-
07:09 AM pfSense Packages Bug #7756 (Resolved): suricata suricata_check_dir_size_limit() needs to be improved
-
03:21 AM pfSense Packages Bug #7756: suricata suricata_check_dir_size_limit() needs to be improved
- Fixed.
-
07:08 AM pfSense Packages Bug #7578 (Resolved): Suricata -- Removing Hosts from Block Table via Alerts
-
03:13 AM pfSense Packages Bug #7578: Suricata -- Removing Hosts from Block Table via Alerts
- Fixed.
-
07:08 AM pfSense Packages Bug #5996 (Closed): Snort service does not start back after rules update
-
02:49 AM pfSense Packages Bug #5996: Snort service does not start back after rules update
- Certainly not a general issue plus insufficient info here to identify any bug.
-
06:29 AM pfSense Packages Bug #7736: Crahs with Quagga OSPF and the latest 2.4 Beta
- bump
-
06:29 AM pfSense Packages Bug #6456 (Not a Bug): vm-bhyve not correctly detecting the modules in kernel
-
03:30 AM pfSense Packages Bug #6456: vm-bhyve not correctly detecting the modules in kernel
- As noted above, long fixed.
-
05:50 AM Feature #7888: Add a button in package manager GUI to upgrade all packages
- And on that note, one to remove them all would help as well.
09/27/2017
-
11:52 PM Bug #7898 (Closed): PFsense 2.4 RC 9/28/17 update - Traffic Shaper HFSC Priority field missing
- See attached screenshot of HFSC shaper parent and qInternet Child which i already setup traffic shaper on 2.3 when i ...
- 08:06 PM Revision f3c5f4c5: Add copyright notice to dashboard page (but only once per upgrade)
-
06:32 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- this time around it took a bit for it to come up, but it did....
[2.4.1-DEVELOPMENT][ler@home-fw.lerctr.org]/tmp: ... -
05:55 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- I can also confirm that it works with the current release (2.4.0.r.20170927.1221).
Only difference (when it comes to... -
03:21 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- DHCP / WAN (passthrough from my NVG-599).
It's consistently (at least now) getting a route by default (I've moved... -
03:16 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- The only way I found to reproduce this problem (no default gateway at boot) was using DHCP on WAN and I intentionally...
-
05:08 PM Bug #7846 (Duplicate): Hyper-v vm traffic shaper error: hn0: driver does not support altq
-
04:01 PM Bug #7846: Hyper-v vm traffic shaper error: hn0: driver does not support altq
- Duplicate of Bug #7869 and fixed.
-
05:08 PM pfSense Packages Bug #7850 (Resolved): Include file containing XML_RPC_encode() missing from snort
-
03:53 PM pfSense Packages Bug #7850: Include file containing XML_RPC_encode() missing from snort
- Fixed.
-
05:08 PM Bug #7839 (Resolved): IPv6 ICMPv6 Type 3 Code 0 (hop limit exceeded in transit) reply uses wrong address.
-
04:50 PM Bug #7839: IPv6 ICMPv6 Type 3 Code 0 (hop limit exceeded in transit) reply uses wrong address.
- Fixed in 2.4.1
-
01:15 PM pfSense Packages Feature #6022: Consider MLVPN for bonded VPN
- Has there been any traction with this? I have been looking for something like this too. I'll add to the kitty for t...
-
12:04 PM Feature #7897 (Rejected): User Dashboard
- Nothing will be available without logging in. That is not a secure means of accomplishing that goal. You can make res...
-
11:54 AM Feature #7897: User Dashboard
- This could be useful for Diags on remote sites that users can check.
Also for putting on a Plasma/Monitor on the ... -
11:50 AM Feature #7897 (Rejected): User Dashboard
- Having a Dashboard that can show stats without logging in.
Traffic, Link status, EG all the widgets without any of... -
10:13 AM Bug #7763 (Resolved): IX driver - fails to recognize media type with SFP after link drop
- Closing this issue as the driver is working as intended.
The media options will not be detected until you restart ... -
09:28 AM Bug #7896 (Resolved): picture_widget.php
- Hi everyone,
First of all, thanks a bunch for such an effort you put on developing this awesome application. While... -
07:59 AM Bug #6499: pf fragment states not purged
- The specific bug on this ticket is fixed on version 2.3.2 and later. Your system may legitimately have a lot of fragm...
-
07:56 AM Bug #6499: pf fragment states not purged
- Chris Buechler wrote:
> fixed
Every so often I am seeing "[zone: pf frag entries] PF frag entries limit reached" ... -
05:16 AM pfSense Packages Feature #7895 (Resolved): Add a script for CARP monitoring to NRPE
- I have deployed several CARP clusters at work, but I realized there is no real good way to monitor CARP status :
* S... -
01:12 AM pfSense Packages Bug #7893: Kernel Panic Suricata Inline
- The “generic_XXXXXX” in one of your screenshots shows you’re not running s netmap-capable NIC. (You’re getting the e...
09/26/2017
-
10:45 PM Bug #7894 (Not a Bug): Open VPN not redirecting traffic over tunnel. Remote IPV6 shows as public IP when "Force all client generated traffic through the tunnel." option is enabled and all IPV6 through pfsense is blocked
- Yeah that would have to be on the client side. It might even be using its own IPv6 tunneling protocol like Teredo
-
10:10 PM Bug #7894: Open VPN not redirecting traffic over tunnel. Remote IPV6 shows as public IP when "Force all client generated traffic through the tunnel." option is enabled and all IPV6 through pfsense is blocked
- So after a bit more trouble shooting, I am leaning against this being a bug in PfSense and possibly in my linux build...
-
09:51 PM Bug #7894 (Not a Bug): Open VPN not redirecting traffic over tunnel. Remote IPV6 shows as public IP when "Force all client generated traffic through the tunnel." option is enabled and all IPV6 through pfsense is blocked
- Hello All,
I just updated to the newest dev build and connected to it remotely and had a shocking supprise. For... -
06:41 PM Revision d47d9b28: Default config packages need to have vital flag set too
-
06:30 PM pfSense Packages Bug #7893: Kernel Panic Suricata Inline
- Thanks for the info, you guys might want to get the package maintainer to put some info under the inline selection, i...
-
06:22 PM pfSense Packages Bug #7893 (Needs Patch): Kernel Panic Suricata Inline
- Inline/Netmap is known to have issues with certain hardware (real or virtual). It's still somewhat of an experimental...
-
06:12 PM pfSense Packages Bug #7893: Kernel Panic Suricata Inline
- I rebooted the VM a few times, and it appears to have stopped it's panic reboot cycle. When I went in to view Suricat...
-
06:01 PM pfSense Packages Bug #7893 (Needs Patch): Kernel Panic Suricata Inline
- I have been playing around with the 2.4.0/1 snapshots, and have found that when Suricata is enabled with inline block...
-
06:00 PM Revision 7d368325: Mark some core packages as vital
-
06:00 PM Revision 99db0fa7: Mark some core packages as vital
-
03:06 PM Revision d3fda40d: Detect XG-1537
-
03:06 PM Revision 53476cfb: Detect XG-1537
-
03:06 PM Revision e4f613db: Detect XG-1537
-
03:06 PM Revision 90c5e3a9: Detect XG-1537
-
01:55 PM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Found it. Had to go back and think about it a minute. It's in the pkg_edit.php file in this code near the bottom of...
-
10:20 AM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Which line are the comments on? I don't see any.
-
01:41 PM Bug #7763: IX driver - fails to recognize media type with SFP after link drop
- The actual bug reported in this ticket is already fixed.
There was a bug in the driver that would fail to add the ... -
11:40 AM Bug #7763 (Assigned): IX driver - fails to recognize media type with SFP after link drop
-
10:28 AM Bug #7763: IX driver - fails to recognize media type with SFP after link drop
- Loaded the latest snapshot from today on a XG-2758. The interface media type displayed properly:
ix0: flags=8843<UP,... -
12:15 PM Bug #7606: Using limiters and VLANs on Supermicro Xeon D boards crashes with kernel panic
- For now it appears my issue has been resolved on 2.4.0.r.20170926.1006.
Side note though, floating rule still does... -
08:51 AM Bug #7877 (Resolved): Crash when enabling traffic shaper on more than 1 port
- People on forum report it's fixed
-
08:49 AM Bug #3710 (Resolved): Adding static DHCP leases doesn't cause BIND zones to update
-
08:48 AM Bug #7869 (Resolved): Hyper-v vm traffic shaper error: hn0: driver does not support altq
-
02:56 AM Bug #7869: Hyper-v vm traffic shaper error: hn0: driver does not support altq
- Solved! Works for me, thanks!
-
08:47 AM Bug #7879 (Resolved): traffic shaper crashes with hfsc_dequeue
09/25/2017
-
08:40 PM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Thanks Bill. I will try to determine why that change was made.
-
08:09 PM Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- To add another note to the conversation. There is a parameter in the _display_top_tabs()_ function that is supposed ...
-
05:32 PM Bug #7879: traffic shaper crashes with hfsc_dequeue
- After initial testing with and pushing some traffic through my queue's which seemed like a sure way to crash it befor...
-
03:17 PM Bug #7879 (Feedback): traffic shaper crashes with hfsc_dequeue
- Found and fixed, a new commit was made to address this issue.
Please test again on the next snapshot.
Thanks! -
03:18 PM Bug #7877 (Feedback): Crash when enabling traffic shaper on more than 1 port
- (duplicate from #7879): Found and fixed, a new commit was made to address this issue.
Please test again on the nex... -
01:44 PM Bug #7833: ipfw will not limit download speed - captiveportal
- Works here as well. Thanks.
-
11:35 AM Bug #7833 (Resolved): ipfw will not limit download speed - captiveportal
-
11:18 AM Bug #7833: ipfw will not limit download speed - captiveportal
- Confirmed, this looks fixed.
I see limiters created and traffic going into them both up and down:... -
09:46 AM Bug #7833: ipfw will not limit download speed - captiveportal
- [2.4.1-DEVELOPMENT][admin@pf6.localdomain]/root: ipfw table all list
--- table(cp_ifaces), set(0) ---
vmx1 2100 147... -
09:42 AM Bug #7833: ipfw will not limit download speed - captiveportal
- Renato Botelho wrote:
> Kill Bill wrote:
> > This got reverted yet again. Sigh.
>
> Yes, because kernel was fixe... -
08:57 AM Bug #7833: ipfw will not limit download speed - captiveportal
- Kill Bill wrote:
> This got reverted yet again. Sigh.
Yes, because kernel was fixed. -
12:41 PM Bug #7819: php-fpm crashing
- The problem stated on this ticket is resolved. If you still have an issue, it's something different. Just because you...
-
12:24 PM Bug #7819: php-fpm crashing
- I am still getting 502 Bad Gateway every day, so bad its about once an hour.. Here is what I can get when its locked ...
-
11:36 AM Bug #7813: Missing download statistics on captive portal with MAC filtering enabled
- Confirmed:...
-
10:29 AM Bug #7813 (Resolved): Missing download statistics on captive portal with MAC filtering enabled
-
10:07 AM Bug #7813: Missing download statistics on captive portal with MAC filtering enabled
- 2.4.1-DEVELOPMENT (amd64)
built on Sun Sep 24 21:37:23 CDT 2017
With enabled MAC filtering:
--- table(teaget... -
11:25 AM Bug #7834: Disabling captiveportal will not flush the ipfw pipes
- Confirmed dynamic Limiters are removed as expected:...
-
10:29 AM Bug #7834 (Resolved): Disabling captiveportal will not flush the ipfw pipes
-
09:56 AM Bug #7834: Disabling captiveportal will not flush the ipfw pipes
- Looks good after disabling CP:
[2.4.1-DEVELOPMENT][admin@pf6.localdomain]/root: ipfw table all list ; echo ; ipfw ... -
11:22 AM Bug #7807: sg-1000 random reboot when traffic shaping enabled
- ok ill try to get crash log again, on apu2 it crashes as soon as u enable shaping on more than 1 interface and on sg-...
-
10:54 AM Bug #7807 (Duplicate): sg-1000 random reboot when traffic shaping enabled
- Neither of those logs contain useful information, the most important parts are before those logs start. If you captur...
-
10:37 AM Bug #7807: sg-1000 random reboot when traffic shaping enabled
- crash log attached
-
08:57 AM pfSense Packages Bug #7891 (Rejected): (suricata), uid 0: exited on signal 11 (core dumped) latest 2.4.0-RC
- This does not appear to be a general issue with suricata, but may be specific to your configuration or installation. ...
-
06:27 AM Feature #4242: Two Factor or OTP Authentication for Admin Interface
- This feature will be really helpful to meet the specifications from the PCI-DSS / ISO27001 or another security certs.
-
03:12 AM Revision ce6d6fdb: Tiny typo
- Just removed an extra `'.'`
09/24/2017
-
10:11 PM Bug #7763 (Feedback): IX driver - fails to recognize media type with SFP after link drop
- Seems like you have found a real bug in the driver.
It is fixed in pfSense 2.4-RC, please try the next snapshot.
... -
09:06 PM pfSense Packages Bug #7891: (suricata), uid 0: exited on signal 11 (core dumped) latest 2.4.0-RC
- Did a fresh reinstall and restored the backup and still got same issue.
-
04:20 PM pfSense Packages Bug #7891: (suricata), uid 0: exited on signal 11 (core dumped) latest 2.4.0-RC
- I found the core dump file.
I couldn't upload the .core file here as it is huge...
so I upload it to my dropbox:
... -
03:49 PM pfSense Packages Bug #7891 (Rejected): (suricata), uid 0: exited on signal 11 (core dumped) latest 2.4.0-RC
- Hi,
Just upgraded from latest stable to next major version 2.4.0-RC today via gui.
Only major problem I have is s... -
04:50 PM Bug #7892 (Closed): AutoConfigBackup status reported incorrectly
- Around 12PM Central time (9/24/17), AutoConfigBackup showed some alerts about unsuccessfully backing up the config.
... -
12:30 PM Bug #7879: traffic shaper crashes with hfsc_dequeue
- I tried 2.4.1 with 'em' E1000 nics on ESXi.. that crashes to..
Version 2.4.1-DEVELOPMENT (amd64)
built on Sat Sep ... -
06:53 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- Larry Rosenman wrote:
> with the current code a straight reboot has the IPv6 default installed.
>
> However, on ... -
06:47 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- with the current code a straight reboot has the IPv6 default installed.
However, on the upgrade to this code did ... -
06:38 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- Well I'm just saying that the results of your testing appear to be completely random and unrelated to any versions. H...
-
06:30 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- just reporting what I'm seeing. I update to each RC and when I get IPv6 default route working I post, and when I see...
-
06:27 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- Larry Rosenman wrote:
> Broke again at:
> 2.4.0-RC (amd64)
> built on Sat Sep 23 22:28:05 CDT 2017
> FreeBSD 11... -
06:14 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- Broke again at:
2.4.0-RC (amd64)
built on Sat Sep 23 22:28:05 CDT 2017
FreeBSD 11.0-RELEASE-p12 -
04:36 AM Bug #7833: ipfw will not limit download speed - captiveportal
- This got reverted yet again. Sigh.
-
01:02 AM Bug #6911: no network on hyperv-v 2012 R1
- resolved in 2.4.1
09/23/2017
-
11:12 PM Feature #7890: Support for Intel/AMD CPU microcode updates
- https://github.com/pfsense/pfsense/pull/3828 for sysutils/devcpu-data and the kernel bits. Adding the GUI toggle to b...
-
11:08 PM Feature #7890 (Rejected): Support for Intel/AMD CPU microcode updates
- It'd be useful to include support for Intel/AMD CPU microcode updates.
https://www.freebsd.org/doc/en/books/faq/co... -
11:58 AM Bug #7594: "vtnet: driver does not support altq" following upgrade to 2.4 (worked in pfSense 2.3)
- What are the chances of getting this fixed for 2.4-RELEASE? Similar bugs (https://redmine.pfsense.org/issues/7869) s...
-
09:49 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- And it works again at:
2.4.0-RC (amd64)
built on Fri Sep 22 20:41:05 CDT 2017
FreeBSD 11.0-RELEASE-p12 -
09:27 AM Feature #7847: USB NIC not loading (TP-Link UE300 RTL8153)
- J L wrote:
> can this be considered as a request to have this automated ?
Stick it as earlyshellcmd to Shellcmd p... -
05:58 AM Bug #7889 (Resolved): The dropdown tabs replacement fallback needs to be limited to certain pages
- AFAICT, this was designed to aid systems with lots of interfaces, and intended for places such as Firewall - Rules. I...
09/22/2017
-
08:53 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- And it *BROKE* again on:
2.4.0-RC (amd64)
built on Fri Sep 22 11:35:27 CDT 2017
FreeBSD 11.0-RELEASE-p12 - 04:02 PM Revision 27d1807a: Don't call widget callback function if no data is returned
- (cherry picked from commit 89d83febe6bf0fd63ec72d53eb8e524a8d19994e)
- 04:01 PM Revision 89d83feb: Don't call widget callback function if no data is returned
- 03:59 PM Revision 352f422c: Dashboard refresh system should not call the widget callback function if no data was returned
- (cherry picked from commit 7a8131028874b334e43b5e7dcf894a86481543c6)
- 03:57 PM Revision 7a813102: Dashboard refresh system should not call the widget callback function if no data was returned
-
02:43 PM Bug #7865 (Resolved): User groups -> Assigned Privileges doesn't work
- Fixed
-
01:53 PM Revision 97c69e81: Revert "Do not associate IP and MAC on down table. It should help #7813 and #7833"
- This reverts commit 0116f1c9bbf1a532fdd49c346c41b761c1e59d93.
-
01:52 PM Revision bd068df3: Revert "Do not associate IP and MAC on down table. It should help #7813 and #7833"
- This reverts commit aa61ecfde0952ed1c3a035ac9489f5a5f9c51425.
-
12:44 PM Feature #7847 (Needs Patch): USB NIC not loading (TP-Link UE300 RTL8153)
-
12:44 PM pfSense Packages Bug #7278 (Resolved): Suricata Service - Advanced Configuration Pass-Through not working
-
11:53 AM Feature #7888 (New): Add a button in package manager GUI to upgrade all packages
- Dunno, am I'm the only one who's missing this?
-
11:37 AM Bug #7869 (Feedback): Hyper-v vm traffic shaper error: hn0: driver does not support altq
- There is a new knob to enable the support and now it is enabled by default in pfSense.
Will be available on the ne... -
01:37 AM Bug #7813 (Feedback): Missing download statistics on captive portal with MAC filtering enabled
- Fixed. Please try the next snapshot (will be available on tomorrow's snapshot).
-
01:36 AM Bug #7833 (Feedback): ipfw will not limit download speed - captiveportal
- Fixed. Please try the next snapshot (will be available on tomorrow's snapshot).
-
12:12 AM Feature #4796: Support Multiple FIBs in pfSense
- I just stumbled upon a case where it would be nice to have the webConfigurator in a separate FIB, because of routing ...
09/21/2017
- 07:45 PM Revision 603be247: Remove erroneous additional text.
-
06:10 PM Revision 0116f1c9: Do not associate IP and MAC on down table. It should help #7813 and #7833
-
06:10 PM Revision aa61ecfd: Do not associate IP and MAC on down table. It should help #7813 and #7833
-
06:08 PM Revision a6f8dd7a: Revert "Update translation files"
- Bad commit log
This reverts commit ff8d44d194b6a5ada8fcd2aafe8c7ec358a7adae. -
06:05 PM Revision ff8d44d1: Update translation files
-
05:24 PM Bug #7887 (Not a Bug): User permissions do not protect firewall rules
- It is working as designed. If you have permissions for a page, you can do anything on that page. The "Edit" page edit...
-
05:10 PM Bug #7887: User permissions do not protect firewall rules
- Michael Newton wrote:
> Javascript should have no bearing on it, since the permissions (should) get checked on the s... -
05:04 PM Bug #7887: User permissions do not protect firewall rules
- Kill Bill wrote:
> Michael Newton wrote:
> > 6. Right click on Save button, inspect in browser's tools and remove "... -
04:55 PM Bug #7887: User permissions do not protect firewall rules
- Michael Newton wrote:
> 6. Right click on Save button, inspect in browser's tools and remove "disabled" attribute
... -
04:30 PM Bug #7887 (Not a Bug): User permissions do not protect firewall rules
- User permissions have only cosmetic effect on the firewall page, if any, and are trivially easy to bypass.
Steps t... -
05:02 PM Revision 575bc378: Update translation files
-
05:02 PM Revision f9cc13d0: Regenerate pot
- 04:27 PM Revision 1144e24c: Fixed #7856
-
02:23 PM Revision 0266efa6: Unbound - allow snoop from localhost
- dig +trace fails without this, which is super annoying for debugging/diagnostics/benchmarking or whatever similar pur...
-
12:57 PM Revision 1841c040: Update translation files
-
12:57 PM Revision 58a62782: Regenerate pot
-
12:37 PM Bug #7886: PRIQ, priority of 0 cannot be saved in GUI, GUI attempts to save a 0 value but actually ends up storing it as the default of 1
- I also noticed that if you reorder and change the names of the priorities, and you have P2P catch-all set (default qu...
-
12:34 PM Bug #7886 (Resolved): PRIQ, priority of 0 cannot be saved in GUI, GUI attempts to save a 0 value but actually ends up storing it as the default of 1
- PRIQ, priority of 0 cannot be saved in GUI, GUI attempts to save a 0 value but actually ends up storing it as the def...
-
12:06 PM Bug #7885 (Resolved): Cert. Manager should validate EKUs on importing a certificate authority
- Currently, you can import any certificate as a CA, even ones that are actually unusable as a CA. Subsequently, you ca...
-
11:40 AM Bug #7856 (Feedback): IPsec status does not show all connected mobile clients
- Applied in changeset commit:1144e24cabeda458b266b9874b827746f4c0f8a0.
-
11:20 AM Bug #4723: Can't forward UDP fragmented packets with scrubbing enabled.
- I am no longer able to troubleshoot this issue, I switched over to IPSec to resolve my SIP/UPD issue. I was working ...
-
11:13 AM Bug #7884 (Confirmed): Unbound refusing non-recursive/iterative queries even from localhost
- PR looks good and the change lets @dig +trace@ and @drill -T@ work locally.
-
09:42 AM Bug #7884 (Resolved): Unbound refusing non-recursive/iterative queries even from localhost
- This is so much secure that it's annoying and getting in the way of normal work for not exactly any good reason.
<... -
11:08 AM Bug #7500 (Resolved): Upgrade From 2.3.3_p1 to 2.4 Fails (libssl.so.8 not found)
-
10:57 AM Bug #7500: Upgrade From 2.3.3_p1 to 2.4 Fails (libssl.so.8 not found)
- I'm no longer seeing this error on recent upgrades, please close the ticket.
For documentation, the following co... -
07:45 AM Bug #7883 (Not a Bug): Aliases can only be deleted by some users
- Most likely they had the 'deny config write' privilege which will do exactly this, and it's expected. On 2.4 it will ...
-
04:25 AM Bug #7883: Aliases can only be deleted by some users
- So, new insights (and the bug in that form can be closed):
- alias generation was not automatic but user triggered
... -
03:57 AM Bug #7883 (Not a Bug): Aliases can only be deleted by some users
- We have following setup:
- pfsense 2.3.4-RELEASE-p1
- one default admin user
- one user with all privileges assign... - 05:45 AM Revision 316af8dc: Update misleading help text
- Commit d57725aac5145b4f17097d61e3b5a6ca72f1754e updated the help text
to use LDAP search filter syntax. This is misle... -
02:39 AM Feature #7882 (Rejected): Seperator feature in DHCP Static mapping for this feature
- Under Firewall -> Rules you have the possibility to seperate the rules with a seperator, this is a nice feature and i...
09/20/2017
-
02:54 PM Bug #7819 (Resolved): php-fpm crashing
- This looks good with 0.50, it no longer crashes on either system I could reproduce the crash on originally.
-
01:55 PM Bug #7819 (Feedback): php-fpm crashing
- php56-pfSense-module version 0.50 should fix this
- 02:37 PM Revision 2f4685ca: Merge branch 'master' of gitlab.netgate.com:pfsense/pfsense
-
02:35 PM Bug #7878 (Resolved): GUI lag in Edit Phase 1 ipsec
- This works now for Chrome on OS X.
-
02:32 PM pfSense Packages Bug #7876 (Resolved): Potential XSS in status_monitoring.php
- Confirmed fixed on the latest snapshot.
-
02:30 PM Bug #7864 (Resolved): OpenVPN (tun/tap) is not showing
- This works now. The wizard is now correctly populating the appropriate variables for the VPN.
-
12:28 PM Bug #7880: 504 Gateway Time-out
- Yes, because the certificate verification and authentication is handled in PHP. If you have more questions, please po...
-
12:24 PM Bug #7880: 504 Gateway Time-out
- is there any reason vpn server not accepting incoming vpn connections?
-
08:01 AM Bug #7880 (Not a Bug): 504 Gateway Time-out
- If a command never terminates, it will run until something stops it (e.g. PHP execution timeout).
There is no way ... -
04:08 AM Bug #7880: 504 Gateway Time-out
- Yeah nothing happens because the command will never return. It will keep pinging forever. PEBKAC.
-
03:18 AM Bug #7880 (Not a Bug): 504 Gateway Time-out
- it is checked on different hardware with the same pfsense version 2.3.4-RELEASE-p1.
If try to run a command (eg ping... -
10:32 AM Feature #1205 (Closed): VPN: User-based / Group-based firewall rules
- This has been in place since pfSense 2.1. It uses the same syntax as cisco inacl/outacl, for example "permit tcp from...
-
10:07 AM Feature #1205: VPN: User-based / Group-based firewall rules
- Ermal Luçi wrote:
> The user based rules are supported if they come from radius.
>
> Locally to pfSense they stil... -
09:46 AM Feature #6457: Allow ability to configure AWS EC2 AMI via userdata
- Internal redmine ticket related to one of the user data options:
https://redmine.netgate.com/issues/162 -
06:51 AM Feature #7881 (New): OpenVPN client - add support for multiple server entries
- OpenVPN in client mode supports multiple "remote" directives, these can be used for redundancy, if the first server f...
-
05:05 AM Bug #6406: Web process becomes unresponsive producing 502 Bad Gateway nginx
- Chris Collins wrote:
> As an experiment I manually adjusted the php-fpm server configuration so there is more childr... -
04:18 AM Bug #7813: Missing download statistics on captive portal with MAC filtering enabled
- See Bug #7833 and kindly re-instate the AWOL fix.
09/19/2017
-
09:38 PM Revision 72d2dbdf: Only run swapon and rc.savecore when the SWAPDEVICE is valid.
- (cherry picked from commit d988e0bbf991e28c611b194e9e6ccd99f818209b)
-
09:38 PM Revision d988e0bb: Only run swapon and rc.savecore when the SWAPDEVICE is valid.
-
07:59 PM Revision 7e0b401d: Include boot/modules and also kernel.debug in kernel-debug package
-
07:58 PM Revision fd349773: Include boot/modules and also kernel.debug in kernel-debug package
-
07:41 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- upgraded today to:
2.4.0-RC (amd64)
built on Tue Sep 19 18:30:48 CDT 2017
FreeBSD 11.0-RELEASE-p12
and 6RD... -
07:03 PM Bug #7879: traffic shaper crashes with hfsc_dequeue
- Possible duplicate of #7877
-
12:57 PM Bug #7879 (Resolved): traffic shaper crashes with hfsc_dequeue
- Today i experienced several crashes in 2.4RC i think there were at least 5.
Ive submitted the crash report a few tim... - 05:47 PM Revision 72878dfa: Authentication selector JavaScript changed to eliminate lag
- (cherry picked from commit dbef7a85819d3c971319de41d287f06419342105)
- 05:46 PM Revision dbef7a85: Authentication selector JavaScript changed to eliminate lag
-
05:21 PM Revision 8451d0a9: Fix #7834: Delete IPFW pipes when disable Captive Portal zone
-
05:21 PM Revision 76c6bf5b: Remove correct file
-
05:21 PM Revision 666cc3d7: Ticket #7834: Add missing global declarations
-
05:21 PM Revision b2c92623: Fix #7834: Delete IPFW pipes when disable Captive Portal zone
-
05:21 PM Revision 5c7fead1: Remove correct file
-
05:21 PM Revision fbfbc6bd: Ticket #7834: Add missing global declarations
-
03:47 PM Bug #7778: DHCP relay not working correctly with bridges
- Any updates on this issue? Do you agree this is a bug or is there a good reason why the bridge interface isn't added ...
- 02:30 PM Revision a2d83aaf: Setup wizard revisions
- (cherry picked from commit 09237040fd9a05415673a47d26e669b274981c2e)
- 02:29 PM Revision 09237040: Setup wizard revisions
-
12:48 PM Bug #7878 (Feedback): GUI lag in Edit Phase 1 ipsec
- JavaScript changed to eliminate lag
-
11:33 AM Bug #7878: GUI lag in Edit Phase 1 ipsec
- Seems to be isolated to only Chrome and only on OS X.
Firefox on OS X is fine. Chrome on Linux and Windows is fine... -
11:15 AM Bug #7878 (Resolved): GUI lag in Edit Phase 1 ipsec
- There appears to be a lag when selecting options for Authentication Method when editing Phase 1 for IPSec. Please se...
-
12:30 PM Bug #7834 (Feedback): Disabling captiveportal will not flush the ipfw pipes
- Applied in changeset commit:b2c926239223ed959a800ddf0c799e7650696d2e.
-
10:41 AM pfSense Packages Bug #7876 (Feedback): Potential XSS in status_monitoring.php
- Fixes pushed to the freebsd-ports repo:
FreeBSD-ports/devel "f044c1e4e3f647028c57ae1a572dc6377e555f... -
09:45 AM pfSense Packages Bug #7876 (Resolved): Potential XSS in status_monitoring.php
- The "view" variable in status_monitoring.php is taken from $_GET and used in a hidden input ("view-title") without en...
-
10:17 AM Bug #7877 (Resolved): Crash when enabling traffic shaper on more than 1 port
- https://forum.pfsense.org/index.php?topic=136733.0
-
02:12 AM Revision 4c53dfbe: Changes Dynamic DNS Status Widget to display client description text for Custom and Custom (v6) entries. Implements #7843
09/18/2017
-
11:23 PM Revision 1c2ef5f2: notifycation, bootup complete
-
09:39 PM pfSense Packages Bug #7875 (Rejected): HAProxy Frontend bug - pfsense 2.3.4-RELEASE-p1 (amd64)
- This is not a platform for discussion or asking support questions. Please post on the forum, mailing list, reddit, et...
-
08:40 PM pfSense Packages Bug #7875 (Rejected): HAProxy Frontend bug - pfsense 2.3.4-RELEASE-p1 (amd64)
- Hi Support,
This issue is related to ticket #7851 .We are advise to upgrade to the latest version 2.3.4-RELEASE-p1... -
05:14 PM Revision eeb09d06: Use correct branch name
-
03:45 PM Revision 040e0b40: Remove the previous 'no_dad' workaround now that if_stf is fixed.
- Partly revert b76e0baebb70775b192507ec18f523141800ce95.
(cherry picked from commit dad3885f9f5afbe0768387527122a8854... -
01:49 PM Revision 9a65d4a2: Populate more default values in the OpenVPN configuration generated by the wizard and rearrange some options so there is less of a difference when editing the configuration for the first time. Fixes #7864
- (cherry picked from commit 95a8ebeb5b7d73e7e72eba27c22d2b2b312f92de)
-
01:49 PM Revision 95a8ebeb: Populate more default values in the OpenVPN configuration generated by the wizard and rearrange some options so there is less of a difference when editing the configuration for the first time. Fixes #7864
-
01:09 PM Feature #7874 (Rejected): Change OpenVPN Help
- The current example is valid. Your example does something different and more complicated that is not what the average...
-
01:03 PM Feature #7874 (Rejected): Change OpenVPN Help
- Currently the OpenVPN text reads:
@EXAMPLE: push "route 10.0.0.0 255.255.255.0"@
This should be updated to
@EXAM... -
01:00 PM Revision 81498c2c: Do not show group privilege controls unless the user is editing an existing group. Fixes #7865
- (cherry picked from commit 7af38087fef168f213c6880c6782153630c13386)
-
12:59 PM Revision 7af38087: Do not show group privilege controls unless the user is editing an existing group. Fixes #7865
-
11:48 AM Revision b9d54e38: Path must be relative here
-
11:47 AM Revision 0f2ee2eb: Path must be relative here
-
09:00 AM Bug #7864 (Feedback): OpenVPN (tun/tap) is not showing
- Applied in changeset commit:95a8ebeb5b7d73e7e72eba27c22d2b2b312f92de.
-
08:10 AM Bug #7865 (Feedback): User groups -> Assigned Privileges doesn't work
- Applied in changeset commit:7af38087fef168f213c6880c6782153630c13386.
-
08:03 AM Bug #7868: bsmtpd hostres feature should not be active when running on esx/proxmox/virtualbox
- PR looks OK but we can't commit to making sure it's in 2.4-RELEASE at the moment. We'll talk it over internally.
-
06:24 AM pfSense Packages Bug #7872 (Not a Bug): Edits not saving
- Also, don't manually edit the config files. The GUI will always overwrite them on purpose. That's what the GUI is for...
-
03:05 AM pfSense Packages Bug #7872: Edits not saving
- Noone is fixing packages in outdated versions that you should not be using in the first place. There were multiple HA...
-
02:50 AM pfSense Packages Bug #7872: Edits not saving
- Is it a known issue? Will upgrading fix? Don't want to upgrade and encounter the same.
-
02:40 AM pfSense Packages Bug #7872: Edits not saving
- How about upgrading your pfSense?
-
02:28 AM pfSense Packages Bug #7872: Edits not saving
- Am on *2.3.2-RELEASE-p1 (amd64)*
-
02:26 AM pfSense Packages Bug #7872 (Not a Bug): Edits not saving
- Am editing */var/etc/haproxy/haproxy.cfg* but looks like changes are getting cleared if someone uses *Services/HAProx...
-
04:50 AM Bug #7873 (Closed): When upgrading, some services/packages do not come back online on the first reboot (but do on the second)
- I am using pfSense on virtual machines on VMware, and noticed the following services do not start properly on the fir...
-
03:08 AM Feature #3013: Better upgrading for a CARP cluster
- I have seen this improvement, so first of all, thank you so much.
However, the problem still remains that the CARP...
09/17/2017
-
06:39 PM pfSense Packages Bug #7871: Add squid validation for selected CA when MITM is enabled
- P.S. There's https://github.com/pfsense/FreeBSD-ports/pull/402 that's been sitting there for about a month, would be ...
-
06:32 PM pfSense Packages Bug #7871 (Resolved): Add squid validation for selected CA when MITM is enabled
- Obviously, this needs to be a CA we have a private key to so that it can issue certificates on the fly to prevent PEB...
-
02:21 PM Bug #7870 (Not a Bug): Traffic Shaper Wizard produces rules that causes a fatal crash. Specifically, qLink:qInternet:qACK:qP2P:qGames:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1'
- A crash+reboot when activating the shaper is not something that happens to everyone with the shaper. Those errors are...
-
01:16 PM Bug #7870 (Not a Bug): Traffic Shaper Wizard produces rules that causes a fatal crash. Specifically, qLink:qInternet:qACK:qP2P:qGames:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1'
- When running the traffic shaper wizard, after the filter refreshes the system crashes and does a forced reboot. Below...
Also available in: Atom