Activity
From 09/16/2017 to 10/15/2017
10/15/2017
-
11:54 PM Bug #7946: 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- Not a bug.
https://forum.pfsense.org/index.php?topic=133280.0 -
07:09 PM Bug #7946 (Resolved): 2.4 Package Manager: Does Not List Installed Packages which have been removed from the repository.
- Upon upgrading to pfSense 2.4, I was unable to perform the recommended approach to move from freeradius 2.x to 3.x be...
-
11:00 PM pfSense Packages Bug #7947 (Rejected): freeRadius 3 on pfSense 2.4 not work
- Afrer upgrade pfsense to 2.4 and install freeradius v3 -- freeRadius not execute....
-
05:13 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- I don't see any mention about memory leaks here but this might be related.
https://forum.pfsense.org/index.php?topic... -
10:41 AM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Just found this bug report after chasing down the issue on my office's pfsense install that was upgraded to 2.4.
I... -
05:11 PM pfSense Packages Feature #7945 (Resolved): NET-SNMP - Flooding log entries
- Please make a better solution for the NET-SNMP logging. Currently it floods the Genereal Log Entries (System Logs / S...
-
03:44 PM pfSense Packages Bug #7944 (Resolved): Bind XMLRPC Sync Error
- After upgrading to pfsense 2.4.0 syncing Bind is not possible anymore. Each time I update the config I get the follow...
-
02:00 PM Feature #7943 (Resolved): Overflow scrolling for top navigation drop-down menus in Fixed mode
- Some resolutions (16:9 on laptops) don't have the vertical height to display all drop down menu items on items such a...
-
01:30 PM Bug #7942: QinQ interfaces never show as active
- ...
-
- In a fresh 2.4 install QinQ interfaces always show in Status > Interfaces as down even when the parent interface show...
-
- After installing and enabling ntop-ng with default settings in 2.4 it is not possible to reach the data display page ...
-
10:32 AM Bug #7937 (Assigned): FreeBSD 11 removed legacy ada aliases, some older installs will fail to mount root post-upgrade
- The code itself appears to work but it doesn't get triggered unless you start to run the upgrade from the CLI, stop w...
-
01:40 AM Bug #7940 (Resolved): disabling LAGG causes system reboot on 2.4
- It looks very similar to this - https://redmine.pfsense.org/issues/7119
When Lagg interface goes down:
<6>carp:...
10/14/2017
-
- Applied in changeset commit:0b2d15478ee375c5bb9bde82ac493e1ea38d2eb6.
-
- Affects both status_captiveportal_test.php and status_captiveportal_expire.php
-
- The voucher test page does nothing when a value is submitted.
-
- Duplicate of #2668
-
03:50 PM Feature #6754: Use of aliases in OpenVPN configuration
- Requested on forums also: https://forum.pfsense.org/index.php?topic=137852.0
-
- Requested on forums also: https://forum.pfsense.org/index.php?topic=137852.0
-
- Judging by some responses on the forum it can also happen on bare metal, not just VMs. The exact conditions are uncle...
-
02:44 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Please either fix the underlying issue if possible. Or at least commit this workaround that seems to be needed for mo...
-
11:20 AM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- No, it's not directly a Snort issue. It appears to be something that was perhaps inadvertently introduced when the t...
-
03:43 AM pfSense Packages Bug #7932: 2.4.0 & Snort 3.2.9.5_1 Pass Lists
- Cheers guys, it does disapear after moving pfSense.mo pfSense.mo.old
So not a Snort issue then. -
- Michael OBrien wrote:
> Is there a reason you're moving this to 2.4.2, or you just need confirmation that it's good ...
10/13/2017
-
09:52 PM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Jim Pingle wrote:
> FYI- FRR is now available for 2.4, 2.3.5 (snapshots), and 2.3.4 users. Internal tests show that ... -
03:42 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- Looks Like KVM has the same issue btw. I am running 2.4.1-DEVELOPMENT (amd64)
built on Fri Oct 13 12:32:36 CDT 2017... -
- It looks like there is actually a patch for FreeBSD now which might help: https://bugs.freebsd.org/bugzilla/show_bug....
-
-
- This one is actually a duplicate of Bug #6748 and I'm still seeing this randomly.
-
- Bill Meeks wrote:
> Andy Kniveton wrote:
> UPDATE- an empty string is the cause, now to find out why ???
>
> Bi... -
- Andy Kniveton wrote:
> Ah I don't have an Assigned Alias, so it displays the txt regardless of what ever the locale ... -
- Ah I don't have an Assigned Alias, so it displays the txt regardless of what ever the locale is set to.
Just creat... -
- I've upgraded from 2.3.4-p1 to 2.4.0 and not changed the locale. it's using the default English I guess as I've not s...
-
- I am so far unable to reproduce this problem in my virtual machine test environment. What language/locale is your fi...
-
- Thanks for the report. I will look into the problem.
Bill -
- This is definitely due to a locking issue with file access in the index.php file for pfBlocker DNSBL. Not sure why it...
-
10:50 AM Bug #7748: VLAN Priority
- Hey, I'm one of those users thanks for putting this in the queue for 2.4.1.
I did a real quick tcpdump looking for... -
- Apparently this negatively impacts users on Google Fiber
https://forum.pfsense.org/index.php?topic=137916.msg754579#... -
- There is a pending PR for this, https://github.com/pfsense/FreeBSD-ports/pull/417
We'll be reviewing PRs shortly n... -
10:44 AM Bug #7937 (Feedback): FreeBSD 11 removed legacy ada aliases, some older installs will fail to mount root post-upgrade
- pfSense-upgrade version 0.27_2 on 2.3.x and 0.34 on 2.4.x check for /dev/adN under /etc/fstab and call "/usr/local/sb...
-
- Some upgrade attempts are failing to mount root after the kernel is upgraded to FreeBSD 11.x due to ada disk driver c...
-
- pfSense-upgrade version 0.27_2 on 2.3.x and 0.34 on 2.4.x are changed
-
- pfSense-upgrade should use pkg-static internally, rather than pkg, to avoid issues with major version upgrades, poten...
-
10:37 AM Feature #1557: Add the Interface descriptions to the OS interface descriptions
- Hi there,
This would be a great feature for those who use Zabbix or similar.
Thanks
Gareth -
09:12 AM Bug #7928: LAGG interfaces lose MAC address
- Can confirm, this is new behavior and I am able to duplicate it per Steve's steps at a client site. The secondary fir...
-
- For reference, at least one person appears to have encountered it on ESX 5.5 as well, though the majority of users ar...
-
- I thought we had another entry for bridge already but today I don't see it. So I reopened this and changed the subjec...
-
03:00 AM Bug #7916: There were error(s) loading the rules: pfctl: ix0: driver does not support altq - The line in question reads [0]: | Intel X520-DA2
- Same problem on 2.4.0!
-
01:22 AM Bug #4310: Limiters + HA results in hangs on secondary
- Sander Naudts wrote:
> Why not change target version to 2.9.9... sorry just little frustrating that this doesn't get...
10/12/2017
-
11:42 PM Bug #6882: bsnmpd uses all available CPU with hostres module active in some cases
- It should be noted that when upgrading, if the host resources MIB was already selected BEFORE the upgrade, it will re...
-
09:51 PM Bug #7936: bridge network interface does not support altq on 2.4.0-RELEASE
- That is true, but all interfaces assigned to bridge0 are igbx, will retest tomorrow
-
- bridge0 is not igbX.
-
- The bridge interface is currently not being built with altq support enabled. This leads to a situation where the user...
-
07:28 PM pfSense Packages Bug #7935 (Resolved): FFR doesn't save prefix lists to bgpd.conf
- Prefix lists referenced in route-maps or directly do not work with bgp when created using the webui. Have to copy the...
-
05:47 PM Bug #7925: VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- For information, the same problem occurs in Workstation 12.5.7 (build 5813279), vm hardware version 11.
It happened ... -
- For anyone experiencing this crash in the meantime, adding @kern.vty=sc@ to @/boot/loader.conf.local@ is confirmed to...
-
04:38 PM
Feature #7934: format support phone# for international use
- Assigned to sdavis. This is a server-side issue
-
04:10 PM Feature #7934 (New): format support phone# for international use
- In the new 2.4.0 release, the Netgate Services and Support dashboard gadget shows the phone# to call. (Good idea, bt...
-
02:47 PM Feature #7643: Send notification when boot completed
- I also think that would be very useful function.
-
- Doesn't make a difference, still the same bug on the same version. If it was closed, you might have a point but it's ...
-
02:23 PM Bug #7933: There were error(s) loading the rules: pfctl: vtnet0: driver does not support altq - The line in question reads [0]:
- Maybe, but the bugs remains on release 2.4.0-RELEASE (amd64), that was for 2.4 BETA and 2.4 RC.
-
- Duplicate of #7594
-
- To let you now my configuration was working nice on 2.3.4-RELEASE-p1
-
- After a clean installation to have zfs filesystem, I restored my configuration, and there is no internet connection c...
-
- Michael OBrien wrote:
> Any chance 2.4.0, with the FreeBSD 11.1 ipsec changes, may resolve this?
Just loaded up 2... -
- https://forum.pfsense.org/index.php?topic=137921.0
-
- Please also post that in the IDS/IPS board of the forum so the package maintainer has a higher chance of seeing it:
... -
- The following appears under Assigned Alias header :-
Project-Id-Version: PACKAGE VERSION Report-Msgid-Bugs-To: POT... -
- Most likely it was old/cached data in your browser and the refresh let it pick up new copies. We have added some prot...
-
11:46 AM Bug #7931: Error: SyntaxError: Unexpected token < in JSON at position 0
- After a refresh the error is gone btw
-
- After Upgrading to 2.4.0 this error is shown in the Traffic Graph Widget on the Dashboard
@Error: SyntaxError: Une... -
- Sending an e-mail notification for that from the firewall itself isn't really a good idea. There are many other ways ...
-
11:13 AM Feature #7930 (Rejected): Upgrade notification
- It would be nice if there was some sort of alerting or notification when pfSense has a new upgrade available (via ema...
-
- We expected to have more time before 2.4.1 but we need to have it out in a week or so, there isn't time to get to thi...
-
10:53 AM Bug #4310: Limiters + HA results in hangs on secondary
- Why not change target version to 2.9.9... sorry just little frustrating that this doesn't get fixed.
-
- You'd be surprised, there are a number of them out there on CF, USB sticks and the like, and some of them have opted ...
-
- Thanks, Jim. That would be a perfectly acceptable solution, with a whole bunch of side benefits.
Especially since I... -
10:28 AM Bug #7786: traffic shaping queue on WAN wont allow total of all child to be 100%
- i think this requires some php code changes only as the web gui doesnt allow, the shaper itself is fine with it when ...
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
-
10:01 AM Feature #7823: Pull request: Add support for dynamic DNS provider ClouDNS
- conflict is fixed.
-
- The PR has conflicts that need resolved.
Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated. -
- This should be re-tested on 2.4.0-RELEASE, the newer FreeBSD 11.1 base has a patch for that crash, I believe. Also it...
-
- Please retry this on 2.4.0-RELEASE which uses a FreeBSD 11.1 base and it has several fixes for Hyper-V.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- There is a new version of strongSwan on 2.4.0-RELEASE, please make this is still happening there.
Moving target to 2... -
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
- Moving target to 2.4.2 as we need 2.4.1 sooner than anticipated.
-
-
01:43 AM Bug #7929 (Resolved): IPSec CA certificate name corrupt if multiple RDNs of the same type are in subject name
- When the CA certificate subject is converted to OSF style, but multiple RDN components of the same type are in the su...
10/11/2017
-
07:27 PM Feature #7321: DynDNS - Add DreamHost DNS support
- OK - I do see that it made it into the 2.4.0 Git branch. I didn't see it listed at https://redmine.pfsense.org/versi...
-
- LAGG interfaces lose their MAC address, normally inherited from the first member, if all links are disconnected and t...
-
03:03 PM Bug #7927 (Closed): (filterdns), uid 0: exited on signal 11 (core dumped)
- #Problem:
With 2.4, and also with 2.4.1, I am seeing frequent error messages
> kernel: pid 12918 (filterdns),... -
02:21 PM Bug #7015: IPsec not working behind NAT
- The problem I reported above occurs when the Phase 2 IPv6 Tunnel "Local Network" is set to "LAN subnet", and therefor...
-
- The way clog reads the records it has to figure out where the start is and then unwind it from there, so it doesn't e...
-
- FWIW, I'm thinking of "tail -f"'s behaviour, where it only tail's the last ~10 lines (I think most implementations de...
-
- I've configured the system log files to be substantially larger than normal, in order to get some reasonable retentio...
-
12:51 PM Bug #7925 (Feedback): VT race condition panic at boot on ESXi 6.5.0U1 and FreeBSD 11.1 base
- The fix is already merge and will be available on next snapshot.
-
- Some users occasionally encounter a panic during OS hardware detection on 2.4 running under ESXi 6.5.0 U1 (Build 6765...
-
- If it's happening on 2.4.0 and started around that time, it's likely related to the FreeBSD 11.1 change and not the I...
-
10:53 AM pfSense Packages Bug #7923: 502 Bad Gateway and unresponsive OS with 2.4
- Jim Pingle wrote:
> The affected code was on 2.4.0 for a couple days but is no longer there now. Current 2.4.0-RC sn... -
- The affected code was on 2.4.0 for a couple days but is no longer there now. Current 2.4.0-RC snapshots and the actua...
-
- Jim Pingle wrote:
> At the moment, the only change in 2.4.1 that isn't in 2.4.0 that might be relevant is #7856
>
... -
- At the moment, the only change in 2.4.1 that isn't in 2.4.0 that might be relevant is #7856
And since we already k... -
- Multiple users complaining that following the infamous 502 Bad Gateway, they eventually are unable to do anything wit...
-
- You must have upgraded to a snapshot that was broken before that one. You'll need to fix your local installation manu...
-
08:29 AM Bug #7924 (Rejected): DHCP Server fails to start after updating to 2.4.0.r.20171009.1758
- After upgrading to 2.4.0.r.20171009.1758, the DHCP server fails with the following error message:
Can't attach int... -
- It looks like this change caused a regression, see #7923
Also one person on the forum reported that the status bre... -
02:21 AM Bug #7272: 6rd not functioning on 2.4.0-BETA
- I can confirm that my issue has been fixed (Altibox Norway ISP). Thank you very much!
10/10/2017
-
06:36 PM Feature #7922 (New): Add the option to select the ISP IPv6 Delegated Prefix as a destination in firewall rules
- It would be useful to have the option to use the ISP delegated prefix (/48, /56, etc) from DHCPv6-PD as a destination...
-
06:13 PM Bug #7921: Reset All States on WAN IP Change does not stay unchecked when disabled in GUI
- Current Base System 2.4.0.r.20171009.1800
-
- Under System > Advanced > Networking, the new option to reset all sates when a WAN IP changes does not stay unchecked...
-
- We were able to disprove the situation with OpenVPN disabled. The initial description still holds.
-
-
03:20 AM Bug #7920: Logos Missing and wrong size
- Resolved
Browser cache... duh! -
- Forgot to add this is on 2.4.1.a.20171009.1853
-
- pfSense logo is the wrong size on the login screen, appears far too large. It's missing completely from the other pag...
-
04:15 AM Bug #7841: CARP Sync Issue - when no internet on standby
- Hi Jim,
I had the same issue when using a PfSense cluster with CARP with a /32 Public IP Allocation. I think lot o...
10/09/2017
-
- Luiz pushed some fixes to clog to correct this, next new snapshot we're testing internally is good.
-
- https://forum.pfsense.org/index.php?topic=137672.msg752928#msg752928
-
- It's also possible syslogd is writing bad data to the file which breaks the clog format, so maybe the syslogd clog pa...
-
- It looks like clog is failing to recognize its own file header somehow....
-
- On new installs logging is failing with:...
-
- Any chance 2.4.0, with the FreeBSD 11.1 ipsec changes, may resolve this?
-
- You can open a new bug report for that with an appropriate title/description, rather than re-using this one which was...
-
- I’m still seeing problems with IPv6 tunneling over an IPv4 IPsec connection, but the symptoms are different from what...
-
- Stephane Debreuil wrote:
> Same issue. It appears after upgrade to 2.4.0.r.20171007.0850 (from 2.4.0.r.20171004.xxxx... -
01:57 AM Bug #7917: GUI shows "There are no packages currently installed" when repos are unreachable
- Same issue. It appears after upgrade to 2.4.0.r.20171007.0850 (from 2.4.0.r.20171004.xxxx).
-
03:32 AM Bug #7918 (Not a Bug): Nightly error reloading rules
- A while ago, I started getting the same notice in my logs every night at the same time. Most of my external servers r...
10/08/2017
-
11:14 PM Bug #7907: Cannot edit IPv4 and IPv6 Local Networks after tunnel creation
- I figured out what the issue is. When "redirect gateway" option is checked the fields for local networks are hidden,...
-
- Duplicate of Bug #7413
-
- !https://image.prntscr.com/image/O75ZDOwbT8KKiypUxRhaWQ.png!...
-
- Jim Pingle wrote:
> I agree, but last I looked OMAPI didn't quite do everything we need. ... That may have changed ... -
- I agree, but last I looked OMAPI didn't quite do everything we need, plus it required making a program in C to interf...
-
- Am I the only one thinking that this absolutely unreadable regex madness needs to go to /dev/null and ISC DHCP server...
-
10:54 AM Feature #7814: Unbound serve-expired please add to GU as tickbox
- yeah I should have updated, martin did the work.
-
- https://github.com/pfsense/pfsense/pull/3817
-
- Frank Gruman wrote:
> I'm pretty interested in finally seeing this delivered. The pull request was accepted into ma... -
- Been fixed with https://github.com/pfsense/FreeBSD-ports/commit/5b20ed3661e6dc6d8b8d3c78aab5784556cc0dc3 almost a yea...
-
- Related forum discussion and PR:
https://forum.pfsense.org/index.php?topic=137317.0
https://github.com/pfsense/pfse... -
- Jared Dillard wrote:
> Needs step 1800 added: https://forum.pfsense.org/index.php?topic=117036.msg695224#msg695224
...
10/07/2017
-
05:20 PM Bug #7916: There were error(s) loading the rules: pfctl: ix0: driver does not support altq - The line in question reads [0]: | Intel X520-DA2
- Please try a recent 2.4 snapshot.
-
- Today i installed a new pfSense Firewall with an Intel X520-DA2 10GB Adapter. After setup the traffic shaper i got th...
-
- Fixed in current snapshots
10/06/2017
-
11:17 PM Bug #7915 (Resolved): CBQ Child queue set bandwidth does not apply correctly
- Example:
LAN interface -> create 2 direct children qLink for the local traffic then qInternet that will house more c... -
- Confirmed. VLANs are functional again on the latest snapshot without needing to use promisc mode.
-
- Fixed in the latest snapshot.
-
09:41 AM Bug #7645: SG-1000 VLAN interfaces do not work without promisc mode
- Upgraded to latest release candidate
2.4.0-RC (arm)
built on Thu Oct 05 21:17:11 CDT 2017
FreeBSD 11.1-RELEASE-p... -
- I'm pretty interested in finally seeing this delivered. The pull request was accepted into master 5 months ago. Is ...
-
- Please re-test with a recent 2.4.0-RC image based on FreeBSD 11.1.
There are significant improvements in this area... -
- Restoring a configuration via the External Config Locator (ECL) does not trigger a package sync, so if the restore co...
-
- Applied in changeset commit:10e93284be3cd62fe871710205e61de0e36dcc2f.
-
- This was caused by commit:7798eb1e6ac48963a2785b449306cb49c942381f - I just pushed a fix that changes the tests a bit...
-
08:22 AM Bug #7913 (Resolved): Applying wizard for creating Traffic Shapers with PRIQ and Prioritize VoIP traffic doesn't create qVoIP and Floating Rule
- For 2.3.4_p1 traffic shaper wizard with PRIQ and enabling VoIP creates qVoIP and Floating Rule
pfctl -sa ALTQ:
queu...
10/05/2017
-
05:22 AM Bug #7912 (Resolved): LDAP Test Results modal doesn't comply with theming
- Under "System > User Manager > Settings > Save & Test", there are sections that seem to only partially comply with th...
10/04/2017
-
- Dan Collins wrote:
> Try a fresh install and none of the sample files are there.
That did not work, they are stil... -
01:21 PM Todo #7911: Suricata missing dropsid sample file in SID Mgmt
- Try a fresh install and none of the sample files are there.
-
-
- Not really.
!https://image.prntscr.com/image/3cJ2VqXiSTmxQxOSiBZEDw.png!
Please post to the forums until you ha... -
- Suricata - sample dropsid_sample.conf file no longer included in SID Mgmt files.
-
- I would like to see a GUI showing a list of alerts and the ability to turn them on/off from sending email.
-
- Moving target to 2.4.0 as this appears to be fixed by FreeBSD 11.1, which is now used by 2.4.0
-
- Moving target to 2.4.0 as this appears to be fixed by FreeBSD 11.1, which is now used by 2.4.0
-
- I just tried this again and the procedure you list still doesn't result in the same outcome here. Try it again on 2.4...
-
- Duplicate of #7825
Don't open a duplicate bug, the other one is still open, just in a feedback state. -
01:45 AM Bug #7909 (Duplicate): XMLRPC: missing "BACKUP" in CARP status with IPv6
- Hi everyone,
as i am not able to reopen the ticket #7825 -- here we go again ;)
The descriptive text ("BACKUP") n...
10/03/2017
-
06:49 PM Feature #7904: Automatic Bandwidth Limiter on Dummynet
- Thanks Jim(s) ;)
A bounty has been created for this project to be completed and submitted to be added to pfSense. ... -
- Yes, unless you are killing states from a serial or VGA console, your own IP address will always show up as you're co...
-
- Erm, eh... you'll need to NOT refresh... like, you are recreating those states when you refresh the page.
-
09:06 AM Bug #7908: "Kill filtered states" button has no effect
- There is my own IP address in the box.
Effectively, if I specify another IP address, it works. But not with my own. -
- What exactly did you have in the box? It only kills properly if you enter an IP address or subnet. The description ma...
-
- In pfsense 2.4.0-RC, when I attempt to kill states using the "Kill filtered states" button in the Diagnostics / State...
10/02/2017
-
- I can't reproduce anything like that here. The fields show up when editing existing tunnels that can push. Perhaps th...
-
- IPv4 and IPv6 Local Networks may be specified when tunnel is created but is not exposed when editing existing tunnel ...
-
- It's working as designed. The export package has no menu entry, so they can't see any menu entry for it.
Users wil... -
10:25 AM Bug #7754: Cannot access "WebCfg - OpenVPN: Client Export Utility" without also granting access to "WebCfg - OpenVPN: Servers"
- tqwqllrm tqwqllrm wrote:
> I tried to create a local group for admins with limited access and I only want that group... -
08:15 AM Bug #7906: Dashboard Version Info Inconsistency
- I'll post on the forum then, but it's still a bug, if perhaps one of a different color: the GUI System Update reporte...
-
- Some component failed in your upgrade. Please post on the forum, mailing list, or reddit and someone can help you get...
-
- Apologies, please disregard my original dashboard screenshot, I unintentionally captured it while it was still displa...
-
- I was previously running pfSense-CE-2.3.3-RELEASE-4g-i386-nanobsd and used System Update from the GUI to upgrade to 2...
-
- Looks like it's a known issue with the nature of auth-user-pass-verify that OpenVPN does not plan to address: https:/...
-
- Little fix, the current plugin did not set the return code upon exiting.
10/01/2017
-
- It's possible in some specific circumstances, but I don't see one of those being a way that would work properly with ...
-
- Thanks Jim!
I really think this would be a highlight feature for pfSense.
It would be very effective traffic ... -
- Actually, it seems completely possible. Van Jacobson’s “pathchar” showed so 20 years ago.
https://www.caida.org/t... -
- The idea isn't to use a speedtest.net to monitor actual bandwidth, but to monitor ping latency to see if the dummynet...
-
- It's not possible. The firewall has no way to determine the actual circuit speed, it must be set manually. A speed te...
-
- Add an automatic bandwidth limiter to pfSense that dynamically limits Down and Up speeds on WAN based on latency in o...
-
04:13 PM Bug #7905 (Resolved): OpenVPN Authentication Against Backend Stalls All Server Traffic
- When authenticating an OpenVPN Remote Access server against an authentication backend such as RADIUS, all traffic on ...
09/30/2017
-
10:53 AM pfSense Packages Feature #7903 (New): Duo ssh package
- When trying to compile the Duo ssh package I get errors. After fixing these, I cannot get the sshd configs to stick o...
-
- Brendon Baumgartner wrote:
> I think to implement this is by setting the server to Other towards the top and leaving... -
- I think to implement this is by setting the server to Other towards the top and leaving the field blank. Then using t...
-
04:45 AM pfSense Packages Bug #6129: zabbix agent/proxy 2.4 not ported to pfSense 2.3
- Brendon Baumgartner wrote:
> Zabbix proxies have to match the version of the Zabbix server so just supporting LTS he... -
- Zabbix agents can be any version.
Zabbix proxies have to match the version of the Zabbix server so just supporting...
09/29/2017
-
- Under: OpenVPN -> Client Export -> Host Name Resolution -> Other
The Host Name field that appears requires a valu... -
-
- Merged and fixed since 2.1.1_9
-
- Thanks!
-
09:57 AM Bug #4723: Can't forward UDP fragmented packets with scrubbing enabled.
- I made the lab in order to reproduce the issue. But could not reproduce one.
I tried to use 2KB frames, and the fram... -
- Additional warning text has been added to the Group Help displayed in the Blocking Mode section of the INTERFACE SETT...
-
10:01 AM
Bug #7592 (Resolved): SG-1000: Unbound not always restarting properly after changes in /etc/hosts
-
- I found there are error messages in logs, but I can see unbound works fine on latest FW on sg1000
Error messages a... -
- Pull requests have been submitted for removing the use of the <no_drop_down> tag on the SYNC tab in both the Snort an...
-
- That message means the public key on the certificate does not match the public key stored with the private key. Post ...
-
08:41 AM Bug #7901 (Rejected): Cannot Import Valid SSL Certificate with Private Key
- I have a wildcard SSL certificate from a vendor using my own private key. This wildcard SSL certificate was successfu...
-
-
06:39 AM Bug #7900: DynamicDNS Amazon Route53 Not Working
- It looks like the settings for the HostZonedID input were changed (previously needed to specify a region and hosted z...
-
- DynamicDNS Provider Route53 is not updating. Despite the failure, the error detection code doesn't catch that a failu...
-
- Looks like the main problem here is fixed. If any specific problem is found, please open a new ticket with details
-
- Works
-
- Works
09/28/2017
-
09:16 AM Bug #7899: a floating 'match' rule on LAN does not put traffic from a broswer on a clientpc into a shaper queue
- Note, I was using PRIQ.
-
- Seeing bug 7116 (https://redmine.pfsense.org/issues/7116) again with squid and any other traffic originating from the...
-
- Seeing bug 7116 again with squid and any other traffic originating from the firewall. Cannot place it into any kind ...
-
- We will keep an eye on this issue, for now it seems to be working.
Thanks everybody. -
- Steve Beaver wrote:
> Yes; it should be nuked. I'd like to wait until after the 2.4 release before doing that, howev... -
08:22 AM
Bug #7889 (Resolved): The dropdown tabs replacement fallback needs to be limited to certain pages
-
08:22 AM
Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Yes; it should be nuked. I'd like to wait until after the 2.4 release before doing that, however.
-
- That works (for the pkg.php/pkg_edit.php as well) provided the limit stays high-enough.
Should the no-op no_drop_... -
08:00 AM
Bug #7889 (Feedback): The dropdown tabs replacement fallback needs to be limited to certain pages
- Applied in changeset commit:5f63cb40ca75f055f85427e78d9e2348b65b05c4.
-
- It was removed deliberately as a part of PR https://github.com/pfsense/pfsense/pull/3795 but in #1994 luiz says HFSC ...
-
- thats because HFSC doesnt use priorities
-
-
- Fixed.
-
-
- Fixed.
-
-
- Fixed.
-
-
- Certainly not a general issue plus insufficient info here to identify any bug.
-
- bump
-
-
- As noted above, long fixed.
-
- And on that note, one to remove them all would help as well.
09/27/2017
-
- See attached screenshot of HFSC shaper parent and qInternet Child which i already setup traffic shaper on 2.3 when i ...
-
06:32 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- this time around it took a bit for it to come up, but it did....
[2.4.1-DEVELOPMENT][ler@home-fw.lerctr.org]/tmp: ... -
05:55 PM Bug #7272: 6rd not functioning on 2.4.0-BETA
- I can also confirm that it works with the current release (2.4.0.r.20170927.1221).
Only difference (when it comes to... -
- DHCP / WAN (passthrough from my NVG-599).
It's consistently (at least now) getting a route by default (I've moved... -
- The only way I found to reproduce this problem (no default gateway at boot) was using DHCP on WAN and I intentionally...
-
-
- Duplicate of Bug #7869 and fixed.
-
-
- Fixed.
-
-
- Fixed in 2.4.1
-
01:15 PM pfSense Packages Feature #6022: Consider MLVPN for bonded VPN
- Has there been any traction with this? I have been looking for something like this too. I'll add to the kitty for t...
-
- Nothing will be available without logging in. That is not a secure means of accomplishing that goal. You can make res...
-
11:54 AM Feature #7897: User Dashboard
- This could be useful for Diags on remote sites that users can check.
Also for putting on a Plasma/Monitor on the ... -
- Having a Dashboard that can show stats without logging in.
Traffic, Link status, EG all the widgets without any of... -
- Closing this issue as the driver is working as intended.
The media options will not be detected until you restart ... -
09:28 AM Bug #7896 (Resolved): picture_widget.php
- Hi everyone,
First of all, thanks a bunch for such an effort you put on developing this awesome application. While... -
- The specific bug on this ticket is fixed on version 2.3.2 and later. Your system may legitimately have a lot of fragm...
-
07:56 AM Bug #6499: pf fragment states not purged
- Chris Buechler wrote:
> fixed
Every so often I am seeing "[zone: pf frag entries] PF frag entries limit reached" ... -
- I have deployed several CARP clusters at work, but I realized there is no real good way to monitor CARP status :
* S... -
- The “generic_XXXXXX” in one of your screenshots shows you’re not running s netmap-capable NIC. (You’re getting the e...
09/26/2017
-
- Yeah that would have to be on the client side. It might even be using its own IPv6 tunneling protocol like Teredo
-
10:10 PM Bug #7894: Open VPN not redirecting traffic over tunnel. Remote IPV6 shows as public IP when "Force all client generated traffic through the tunnel." option is enabled and all IPV6 through pfsense is blocked
- So after a bit more trouble shooting, I am leaning against this being a bug in PfSense and possibly in my linux build...
-
- Hello All,
I just updated to the newest dev build and connected to it remotely and had a shocking supprise. For... -
06:30 PM pfSense Packages Bug #7893: Kernel Panic Suricata Inline
- Thanks for the info, you guys might want to get the package maintainer to put some info under the inline selection, i...
-
- Inline/Netmap is known to have issues with certain hardware (real or virtual). It's still somewhat of an experimental...
-
- I rebooted the VM a few times, and it appears to have stopped it's panic reboot cycle. When I went in to view Suricat...
-
- I have been playing around with the 2.4.0/1 snapshots, and have found that when Suricata is enabled with inline block...
-
- Found it. Had to go back and think about it a minute. It's in the pkg_edit.php file in this code near the bottom of...
-
10:20 AM
Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Which line are the comments on? I don't see any.
-
- The actual bug reported in this ticket is already fixed.
There was a bug in the driver that would fail to add the ... -
-
10:28 AM Bug #7763: IX driver - fails to recognize media type with SFP after link drop
- Loaded the latest snapshot from today on a XG-2758. The interface media type displayed properly:
ix0: flags=8843<UP,... -
12:15 PM Bug #7606: Using limiters and VLANs on Supermicro Xeon D boards crashes with kernel panic
- For now it appears my issue has been resolved on 2.4.0.r.20170926.1006.
Side note though, floating rule still does... -
- People on forum report it's fixed
-
-
-
02:56 AM Bug #7869: Hyper-v vm traffic shaper error: hn0: driver does not support altq
- Solved! Works for me, thanks!
-
09/25/2017
-
08:40 PM
Bug #7889: The dropdown tabs replacement fallback needs to be limited to certain pages
- Thanks Bill. I will try to determine why that change was made.
-
- To add another note to the conversation. There is a parameter in the _display_top_tabs()_ function that is supposed ...
-
- After initial testing with and pushing some traffic through my queue's which seemed like a sure way to crash it befor...
-
- Found and fixed, a new commit was made to address this issue.
Please test again on the next snapshot.
Thanks! -
- (duplicate from #7879): Found and fixed, a new commit was made to address this issue.
Please test again on the nex... -
- Works here as well. Thanks.
-
-
- Confirmed, this looks fixed.
I see limiters created and traffic going into them both up and down:... -
- [2.4.1-DEVELOPMENT][admin@pf6.localdomain]/root: ipfw table all list
--- table(cp_ifaces), set(0) ---
vmx1 2100 147... -
- Renato Botelho wrote:
> Kill Bill wrote:
> > This got reverted yet again. Sigh.
>
> Yes, because kernel was fixe... -
- Kill Bill wrote:
> This got reverted yet again. Sigh.
Yes, because kernel was fixed. -
- The problem stated on this ticket is resolved. If you still have an issue, it's something different. Just because you...
-
- I am still getting 502 Bad Gateway every day, so bad its about once an hour.. Here is what I can get when its locked ...
-
- Confirmed:...
-
-
- 2.4.1-DEVELOPMENT (amd64)
built on Sun Sep 24 21:37:23 CDT 2017
With enabled MAC filtering:
--- table(teaget... -
- Confirmed dynamic Limiters are removed as expected:...
-
-
- Looks good after disabling CP:
[2.4.1-DEVELOPMENT][admin@pf6.localdomain]/root: ipfw table all list ; echo ; ipfw ... -
- ok ill try to get crash log again, on apu2 it crashes as soon as u enable shaping on more than 1 interface and on sg-...
-
- Neither of those logs contain useful information, the most important parts are before those logs start. If you captur...
-
- crash log attached
-
- This does not appear to be a general issue with suricata, but may be specific to your configuration or installation. ...
-
06:27 AM Feature #4242: Two Factor or OTP Authentication for Admin Interface
- This feature will be really helpful to meet the specifications from the PCI-DSS / ISO27001 or another security certs.
09/24/2017
-
- Seems like you have found a real bug in the driver.
It is fixed in pfSense 2.4-RC, please try the next snapshot.
... -
09:06 PM pfSense Packages Bug #7891: (suricata), uid 0: exited on signal 11 (core dumped) latest 2.4.0-RC
- Did a fresh reinstall and restored the backup and still got same issue.
-
- I found the core dump file.
I couldn't upload the .core file here as it is huge...
so I upload it to my dropbox:
... -
- Hi,
Just upgraded from latest stable to next major version 2.4.0-RC today via gui.
Only major problem I have is s... -
04:50 PM
Bug #7892 (Closed): AutoConfigBackup status reported incorrectly
- Around 12PM Central time (9/24/17), AutoConfigBackup showed some alerts about unsuccessfully backing up the config.
... -
- I tried 2.4.1 with 'em' E1000 nics on ESXi.. that crashes to..
Version 2.4.1-DEVELOPMENT (amd64)
built on Sat Sep ... -
- Larry Rosenman wrote:
> with the current code a straight reboot has the IPv6 default installed.
>
> However, on ... -
- with the current code a straight reboot has the IPv6 default installed.
However, on the upgrade to this code did ... -
- Well I'm just saying that the results of your testing appear to be completely random and unrelated to any versions. H...
-
- just reporting what I'm seeing. I update to each RC and when I get IPv6 default route working I post, and when I see...
-
- Larry Rosenman wrote:
> Broke again at:
> 2.4.0-RC (amd64)
> built on Sat Sep 23 22:28:05 CDT 2017
> FreeBSD 11... -
- Broke again at:
2.4.0-RC (amd64)
built on Sat Sep 23 22:28:05 CDT 2017
FreeBSD 11.0-RELEASE-p12 -
- This got reverted yet again. Sigh.
-
01:02 AM Bug #6911: no network on hyperv-v 2012 R1
- resolved in 2.4.1
09/23/2017
-
- https://github.com/pfsense/pfsense/pull/3828 for sysutils/devcpu-data and the kernel bits. Adding the GUI toggle to b...
-
- It'd be useful to include support for Intel/AMD CPU microcode updates.
https://www.freebsd.org/doc/en/books/faq/co... -
- What are the chances of getting this fixed for 2.4-RELEASE? Similar bugs (https://redmine.pfsense.org/issues/7869) s...
-
- And it works again at:
2.4.0-RC (amd64)
built on Fri Sep 22 20:41:05 CDT 2017
FreeBSD 11.0-RELEASE-p12 -
- J L wrote:
> can this be considered as a request to have this automated ?
Stick it as earlyshellcmd to Shellcmd p... -
- AFAICT, this was designed to aid systems with lots of interfaces, and intended for places such as Firewall - Rules. I...
09/22/2017
-
- And it *BROKE* again on:
2.4.0-RC (amd64)
built on Fri Sep 22 11:35:27 CDT 2017
FreeBSD 11.0-RELEASE-p12 -
- Fixed
-
-
-
- Dunno, am I'm the only one who's missing this?
-
- There is a new knob to enable the support and now it is enabled by default in pfSense.
Will be available on the ne... -
- Fixed. Please try the next snapshot (will be available on tomorrow's snapshot).
-
- Fixed. Please try the next snapshot (will be available on tomorrow's snapshot).
-
- I just stumbled upon a case where it would be nice to have the webConfigurator in a separate FIB, because of routing ...
09/21/2017
-
- It is working as designed. If you have permissions for a page, you can do anything on that page. The "Edit" page edit...
-
- Michael Newton wrote:
> Javascript should have no bearing on it, since the permissions (should) get checked on the s... -
05:04 PM Bug #7887: User permissions do not protect firewall rules
- Kill Bill wrote:
> Michael Newton wrote:
> > 6. Right click on Save button, inspect in browser's tools and remove "... -
- Michael Newton wrote:
> 6. Right click on Save button, inspect in browser's tools and remove "disabled" attribute
... -
- User permissions have only cosmetic effect on the firewall page, if any, and are trivially easy to bypass.
Steps t... -
12:37 PM Bug #7886: PRIQ, priority of 0 cannot be saved in GUI, GUI attempts to save a 0 value but actually ends up storing it as the default of 1
- I also noticed that if you reorder and change the names of the priorities, and you have P2P catch-all set (default qu...
-
- PRIQ, priority of 0 cannot be saved in GUI, GUI attempts to save a 0 value but actually ends up storing it as the def...
-
- Currently, you can import any certificate as a CA, even ones that are actually unusable as a CA. Subsequently, you ca...
-
11:40 AM
Bug #7856 (Feedback): IPsec status does not show all connected mobile clients
- Applied in changeset commit:1144e24cabeda458b266b9874b827746f4c0f8a0.
-
11:20 AM Bug #4723: Can't forward UDP fragmented packets with scrubbing enabled.
- I am no longer able to troubleshoot this issue, I switched over to IPSec to resolve my SIP/UPD issue. I was working ...
-
- PR looks good and the change lets @dig +trace@ and @drill -T@ work locally.
-
- This is so much secure that it's annoying and getting in the way of normal work for not exactly any good reason.
<... -
-
- I'm no longer seeing this error on recent upgrades, please close the ticket.
For documentation, the following co... -
- Most likely they had the 'deny config write' privilege which will do exactly this, and it's expected. On 2.4 it will ...
-
04:25 AM Bug #7883: Aliases can only be deleted by some users
- So, new insights (and the bug in that form can be closed):
- alias generation was not automatic but user triggered
... -
- We have following setup:
- pfsense 2.3.4-RELEASE-p1
- one default admin user
- one user with all privileges assign... -
02:39 AM Feature #7882 (Rejected): Seperator feature in DHCP Static mapping for this feature
- Under Firewall -> Rules you have the possibility to seperate the rules with a seperator, this is a nice feature and i...
09/20/2017
-
- This looks good with 0.50, it no longer crashes on either system I could reproduce the crash on originally.
-
- php56-pfSense-module version 0.50 should fix this
-
- This works now for Chrome on OS X.
-
- Confirmed fixed on the latest snapshot.
-
- This works now. The wizard is now correctly populating the appropriate variables for the VPN.
-
- Yes, because the certificate verification and authentication is handled in PHP. If you have more questions, please po...
-
12:24 PM Bug #7880: 504 Gateway Time-out
- is there any reason vpn server not accepting incoming vpn connections?
-
- If a command never terminates, it will run until something stops it (e.g. PHP execution timeout).
There is no way ... -
- Yeah nothing happens because the command will never return. It will keep pinging forever. PEBKAC.
-
- it is checked on different hardware with the same pfsense version 2.3.4-RELEASE-p1.
If try to run a command (eg ping... -
- This has been in place since pfSense 2.1. It uses the same syntax as cisco inacl/outacl, for example "permit tcp from...
-
10:07 AM Feature #1205: VPN: User-based / Group-based firewall rules
- Ermal Luçi wrote:
> The user based rules are supported if they come from radius.
>
> Locally to pfSense they stil... -
- Internal redmine ticket related to one of the user data options:
https://redmine.netgate.com/issues/162 -
- OpenVPN in client mode supports multiple "remote" directives, these can be used for redundancy, if the first server f...
-
- Chris Collins wrote:
> As an experiment I manually adjusted the php-fpm server configuration so there is more childr... -
- See Bug #7833 and kindly re-instate the AWOL fix.
09/19/2017
-
- upgraded today to:
2.4.0-RC (amd64)
built on Tue Sep 19 18:30:48 CDT 2017
FreeBSD 11.0-RELEASE-p12
and 6RD... -
- Possible duplicate of #7877
-
- Today i experienced several crashes in 2.4RC i think there were at least 5.
Ive submitted the crash report a few tim... -
03:47 PM Bug #7778: DHCP relay not working correctly with bridges
- Any updates on this issue? Do you agree this is a bug or is there a good reason why the bridge interface isn't added ...
-
12:48 PM
Bug #7878 (Feedback): GUI lag in Edit Phase 1 ipsec
- JavaScript changed to eliminate lag
-
- Seems to be isolated to only Chrome and only on OS X.
Firefox on OS X is fine. Chrome on Linux and Windows is fine... -
11:15 AM Bug #7878 (Resolved): GUI lag in Edit Phase 1 ipsec
- There appears to be a lag when selecting options for Authentication Method when editing Phase 1 for IPSec. Please se...
-
- Applied in changeset commit:b2c926239223ed959a800ddf0c799e7650696d2e.
-
- Fixes pushed to the freebsd-ports repo:
FreeBSD-ports/devel "f044c1e4e3f647028c57ae1a572dc6377e555f... -
- The "view" variable in status_monitoring.php is taken from $_GET and used in a hidden input ("view-title") without en...
-
10:17 AM
Bug #7877 (Resolved): Crash when enabling traffic shaper on more than 1 port
- https://forum.pfsense.org/index.php?topic=136733.0
09/18/2017
-
- This is not a platform for discussion or asking support questions. Please post on the forum, mailing list, reddit, et...
-
08:40 PM pfSense Packages Bug #7875 (Rejected): HAProxy Frontend bug - pfsense 2.3.4-RELEASE-p1 (amd64)
- Hi Support,
This issue is related to ticket #7851 .We are advise to upgrade to the latest version 2.3.4-RELEASE-p1... -
- The current example is valid. Your example does something different and more complicated that is not what the average...
-
- Currently the OpenVPN text reads:
@EXAMPLE: push "route 10.0.0.0 255.255.255.0"@
This should be updated to
@EXAM... -
- Applied in changeset commit:95a8ebeb5b7d73e7e72eba27c22d2b2b312f92de.
-
- Applied in changeset commit:7af38087fef168f213c6880c6782153630c13386.
-
- PR looks OK but we can't commit to making sure it's in 2.4-RELEASE at the moment. We'll talk it over internally.
-
- Also, don't manually edit the config files. The GUI will always overwrite them on purpose. That's what the GUI is for...
-
- Noone is fixing packages in outdated versions that you should not be using in the first place. There were multiple HA...
-
02:50 AM pfSense Packages Bug #7872: Edits not saving
- Is it a known issue? Will upgrading fix? Don't want to upgrade and encounter the same.
-
- How about upgrading your pfSense?
-
- Am on *2.3.2-RELEASE-p1 (amd64)*
-
- Am editing */var/etc/haproxy/haproxy.cfg* but looks like changes are getting cleared if someone uses *Services/HAProx...
-
- I am using pfSense on virtual machines on VMware, and noticed the following services do not start properly on the fir...
-
- I have seen this improvement, so first of all, thank you so much.
However, the problem still remains that the CARP...
09/17/2017
-
- P.S. There's https://github.com/pfsense/FreeBSD-ports/pull/402 that's been sitting there for about a month, would be ...
-
- Obviously, this needs to be a CA we have a private key to so that it can issue certificates on the fly to prevent PEB...
-
- A crash+reboot when activating the shaper is not something that happens to everyone with the shaper. Those errors are...
-
01:16 PM Bug #7870 (Not a Bug): Traffic Shaper Wizard produces rules that causes a fatal crash. Specifically, qLink:qInternet:qACK:qP2P:qGames:qOthersHigh:qOthersLow N:U:U:U:U:U:U:U' returned exit code '1'
- When running the traffic shaper wizard, after the filter refreshes the system crashes and does a forced reboot. Below...
09/16/2017
-
07:52 PM Feature #2358: NAT64 support
- Seems FreeBSD 11.1 now has NAT64. This is what "we" were waiting on right?
https://www.freebsd.org/releases/11.1R/... -
- The assign privileges control should be hidden when creating a group, but it's showing too soon.
Not critical enou... -
- When you try to add a new usergroup (system_groupmanager.php?act=new) then you can assign privileges on this group an...
-
- This is a duplicate of #6688, it has been fixed on 2.4, not 2.3.x.
-
01:15 PM Bug #7867: Dynamic DNS provider password containing special character %
- Login to the service openDNS failed then the password contained the special character %. The "Dynamic DNS Clients" GU...
-
- Login to the service openDNS failed then the password contained the special character %. The "Dynamic DNS Clients" GU...
-
-
- ...
-
04:25 PM Bug #7866: snort version 3.2.9.5_1 shows WAN status as stopped
- Here is snippet from the system log:...
-
- Ok posted on forum
So no bugs against snort are to be logged ?
What is unclear from this issue ?
Thx -
- Please use forums [1] for support. There's no info here to identify any bug, plus there were no changes whatsoever re...
-
- After updating to snort version 3.2.9.5_1 status for WAN is always shown as stopped via Services/Snort/Interfaces
... -
- after applying traffic shaper in a clean and new installed 2.4RC on a Hyper-v vm I got this message:
There were er... -
- Even though the message on services/smtp page says:
"The hostres module is not compatible with VMware virtual machin... -
- I found out that when it was maked through the wizard option, this will happen.
-
- In the description of the OpenVPN Servers there was the information of it was an (tun) or (tap) tunnel.
Now it only ... -
07:26 AM Bug #7594: "vtnet: driver does not support altq" following upgrade to 2.4 (worked in pfSense 2.3)
- I can confirm that Traffic Shaping is broken on VTNET Interfaces.
If active the Firewall / PortForward Rules don't w... -
- Another example making no rulesloaded (vtnet doesnt support altq): https://redmine.pfsense.org/issues/7594
-
05:13 AM Bug #7863 (New): The "WebCfg - All pages" permission inclueds the "User - System: Shell account access" even though that is not a WebCofg page.
- If this is intended that is fine but it just seems wrong to me.
-
- Duplicate of Bug #6129.
Also available in: Atom