Activity
From 09/24/2018 to 10/23/2018
10/23/2018
-
06:19 PM Revision 20895301: Fix processing of the 'all' group. Fixes #9051
- All the 'all' group to the list of groups at the end, rather than the
start. This way it will be considered no matter... -
- All the 'all' group to the list of groups at the end, rather than the
start. This way it will be considered no matter... -
- (cherry picked from commit 3be699295e5cb7be24cc5361700be1a8b759e26c)
-
-
- Applied in changeset commit:4de15854384e28004b0dc571dc8a40fda7eae694.
-
01:07 PM Feature #9062 (Rejected): Add "email notification" when the WAN interface change its public IP
- It would be helpful if an email is send when the WAN interface change its public IP.
Here is an example: https://www... -
- Applied in changeset commit:3be699295e5cb7be24cc5361700be1a8b759e26c.
-
- The powerd parameters @powerd_ac_mode@, @powerd_battery_mode@, and @powerd_normal_mode@ are not validated against the...
-
08:39 AM Feature #9060 (New): add rule name filtering field for firewall log viewer
- It would be very helpful to have a field available in the firewall log filter to search on matched rule name (i.e. Ev...
-
- Unbound 1.8.1 has fixed a few memory leaks, notably one in DNS over TLS that causes unbound to consume all memory and...
-
08:21 AM Bug #9058: Kernel panic during L2TP retransmit
- Right now it happens at least once a day, but at random times. I'll check if the amount of traffic might be related.
-
- I saw a crash with a backtrace like that once on a test VM with an L2TP WAN but only one time, not repeatedly, so I c...
-
- I'm using a Multilink L2TP WAN. After a fresh reinstall of 2.4.4 and completely new config (no import) it crashes reg...
-
01:06 AM Bug #8937: LAGG shows wrong ether address
- Create a new LAGG with some interfaces and save it. Once thats done, edit that LAGG and on everything interface name ...
10/22/2018
-
11:48 PM Bug #9051: Privileges on 'all' group are not being honored
- removed the 'all' from both files and got access again, also admin is disabled using different user as admin
-
- I just upgraded and got no page assigned
-
- (cherry picked from commit 74a8a219d33c9b87ab4b6b4026d247f0f6bdcaa6)
-
-
06:36 PM pfSense Docs Correction #9057 (Resolved): [feedback form] Missing info on advanced networking page
- *Page*: https://docs.netgate.com/pfsense/en/latest/config/advanced-networking.html
*Feedback*: Missing info on the... - 05:35 PM Revision aa733351: gateway monitoring, wait for apinger to terminate or remove its pid file when restarting it.
- (cherry picked from commit 66491555711182d9176f6292fd58397c65e4b2af)
-
05:35 PM Revision 8e823a93: generate a flag even if trying to perform RADIUS MAC authentication on a non-RADIUS server.
- (cherry picked from commit 22e328743170b62b55d6e18b593c4005e8d6f892)
-
- (cherry picked from commit 774ff51ba07f944a39fdc6859ec7d258b95315bf)
-
- (cherry picked from commit 2d7ed31e3227566d0474929a3aed84509247f91e)
-
- 03:28 PM Revision 8be7aff9: Merge pull request #3987 from PiBa-NL/20180920-apinger-wait-for-terminate
- 03:22 PM Revision 768eccf9: Merge pull request #4000 from Augustin-FL/patch-cp-3
-
- Applied in changeset commit:74a8a219d33c9b87ab4b6b4026d247f0f6bdcaa6.
-
- If a user has allowed DHCP override of DNS servers but there are no DCHP WANs, the search domain list will be empty.
... -
12:44 PM Bug #9054: Gateway Group slow (or never) to switch back to Tier 1
- If I set the Tier 1 gateway as "Mark Gateway as Down" then turn that setting back off, the routing will correct itsel...
-
- See https://forum.netgate.com/topic/136852/2-4-4-gateway-group-slow-or-never-to-switch-back-to-tier-1. (No responses...
-
- Applied in changeset commit:2d7ed31e3227566d0474929a3aed84509247f91e.
-
- If we determine that there is a use case for allowing the other method, we can setup GUI controls for it later as a s...
-
- With IKEv2, the EAP Identity does not necessarily match the @rightid@ supplied by the client. For most common use cas...
-
10:36 AM Bug #8964: IPsec async cryptography advanced setting - TCP traffic not passing through
- I'm seeing this bug occur on my SG-3100s when using one of the AES-GCM based algorithms for my IPSEC Phase2 with asyn...
-
10:29 AM
Bug #8921: dpinger without .pid files.?. 'pending' status
- PR tested and applied. Thanks.
-
10:28 AM
Bug #8921 (Feedback): dpinger without .pid files.?. 'pending' status
-
10:26 AM
Bug #8937 (Feedback): LAGG shows wrong ether address
- Please provide some more details of this issue. It is not clear from the description what the problem is. Where do yo...
-
10:23 AM
Feature #9032 (Feedback): RADIUS MAC Authentication: display the login page when MAC auth failed
10/21/2018
-
09:26 PM Bug #8555: Selectively killing states on WAN failure
- don't kill states when failover gateway is down:
https://github.com/pfsense/pfsense/pull/4159 -
12:09 PM pfSense Packages Bug #9050: Antartica does not make a rule
- I am not actively working on the previous release.
The devel version will be the next release version in a short p... -
10:23 AM pfSense Packages Bug #8909: tinc package makes /rc.newwanip looping forever
- I guess I found a workaround: define a static IP address into the interface, then enable it and use in firewall and o...
10/20/2018
-
11:02 PM Bug #9053 (Resolved): Dynamic DNS will not allow Route 53 wildcard record
- When configuring a dynamic DNS client to update Route 53 (AWS) records, the web form will not validate a hostname tha...
-
08:15 PM pfSense Packages Bug #9050: Antartica does not make a rule
- How long does it take to make it to the main version? It's been months and multiple releases since it says it was fi...
-
- This is fixed in the pfBlockerNG-devel version.
-
- Font Awesome in pfSense is using version (4.5.0). v4.x has been marked as End-of-life:
https://github.com/pfsense/... -
10:15 AM Bug #9051: Privileges on 'all' group are not being honored
- Should be easy to replicate, I just added a new user to admins group.
In the attached config I had added "page-d... -
- That should not have been caused by this but I'll test it some more.
This should have only _added_ privileges to t... -
- Jim Pingle wrote:
> All users are a member of the "All Users" group (actual group name internally: @all@).
>
> Pr...
10/19/2018
-
- (cherry picked from commit fe1afbb7549907e0d1cdfbf85d5f36d075a6a916)
-
-
- It's actually already at 3.6 on 2.4.5 snapshots, and trying to pick back changes proved to be a bit of a challenge. I...
-
11:18 AM
Feature #8946: Add field to show IA_PD to DHCP6 Server page
- PR was closed. Awaiting new PR(s)
-
- Applied in changeset commit:fe1afbb7549907e0d1cdfbf85d5f36d075a6a916.
-
- All users are a member of the "All Users" group (actual group name internally: @all@).
Privileges can be added to ... -
08:16 AM Bug #7905: OpenVPN Authentication Against Backend Stalls All Server Traffic
- Unfortunately, with pfSense version 2.4.4, the fallback to an alternative RADIUS server is still not operational.
...
10/18/2018
-
- Just because two bugs affect the same subsystem doesn't mean they are related, though. Limiters work fine for many pe...
-
03:06 PM Bug #8956: traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
- Yes, of course! I might not have been clear, I totally understand that these are bugs in two different areas of code....
-
- They are unrelated, the only thing they have in common is that they are both limiter issues. One is a GUI parsing pro...
-
- Ok, great - I'm glad you've seen it.
FWIW, I would vote for those two issues to go out together. While fixing the... -
- Eliminates inaccurate shell exec/grep/preg_match syntax issues.
(cherry picked from commit 5142c80abbaa7b2dd219c03ed... -
- Eliminates inaccurate shell exec/grep/preg_match syntax issues.
-
- If Antarctica entries with a count > 0 are added to the pfBlockerNG GeoIP, there won't be an Antarctica rule created....
-
11:30 AM Bug #8555: Selectively killing states on WAN failure
- Well it still could be worth submitting the PR to get some other eyes on it.
Also, having it up on Github would ma... -
- Applied in changeset commit:5142c80abbaa7b2dd219c03edd60c4f675d2fb62.
-
- I'd rather not change one funky regex matching pattern for another. I have a better fix. Push incoming.
-
- Did you ever submit a PR for this?
-
07:47 AM Bug #9049 (Not a Bug): IPSec statuspage shows both connected and connecting tunnel
- Since bugnumber 8117 has been served off as not a bug, and no further response is given I'd like to re-open this bug....
10/17/2018
-
- Unfortunately, I never really had the opportunity to create a proper complete build or run this outside a virtual env...
-
- Steven, pretty impressive work you've done there. How have these patches been working for you? Have you gotten any ot...
-
- The memstick installers use GPT but they only include three partitions and not four. This can cause a problem when wr...
- 01:51 PM Revision 5baf07c8: Simplify schedule validation
- (cherry picked from commit bb7cabdb20e7bad06263d5b3888c71415d6861c1)
- 01:50 PM Revision 619f9e51: Added #8976 Allow traffic graph settings to be saved
- (cherry picked from commit dd8a6d75e7a7cadc9a182c0306e8d04799a63338)
- 01:50 PM Revision 4bc2dab8: Disable display of Diagnostics->AutoConfigBackup menu item if config is restored from pfSense < 2.4.4
- Fixed #8959
(cherry picked from commit 245bfa559b5d8ebcb13b21feceaa58257ee194da) - 01:50 PM Revision 613fa52d: Add top buttons if table > 24 rows
- (cherry picked from commit e7299fd8c5ad6998aab372dc40f033f1dcb8d605)
- 01:50 PM Revision 96101eb4: Fix German translation error. Also fixed in Zanata
- (cherry picked from commit 84dc4a557c911d0a53a861d66021ff7f65400e87)
- 01:50 PM Revision 050599fa: Fixed #9002 - PPPoE Service Name may contain ':'
- (cherry picked from commit dac4cd09699bdafa5bcf1cf7b699438e5f669b26)
- 01:50 PM Revision bf6a27e4: Fix typo in error msg
- (cherry picked from commit c921665902c0a0bccd2376437a1ab1118009f86f)
- 01:50 PM Revision 1b1aef35: Default ACB schedule to every day at midnight
- (cherry picked from commit ebbc9e97a62464650684033df7f9cd7c3d32e609)
- 01:50 PM Revision 68cba33c: Fixes #8949 Looks like there was 2 variable names for the same variable shownetboot and netboot. It now just uses the variable name netboot
- (cherry picked from commit e46ea2c60986c62371966025ab3068466217fefa)
- 01:50 PM Revision b35a897b: Added scheduled config backup
- Fixed: #8947
(cherry picked from commit a1aa91dec887ba929be08c993170803396a669b2) -
- I've seen it but it isn't directly relevant to this specific bug. This was only about the queues not showing.
-
- Hey Jim. Glad to see this issue is getting fixed - that's great!
However, I want to be sure you've seen #8973, whi... -
- Also relevant/related: commit:8038c4e807c88fda4e1bb5b37ac31c9dbb8395fe
-
- This has already been fixed while addressing another issue, see #8974
-
12:22 PM Bug #9047 (Duplicate): SSH port is not being saved properly
- Hi guys,
After upgrading from 2.4.3-RELEASE (amd64) to 2.4.4-RELEASE, I noticed that my config wasn't generated prop... -
- (cherry picked from commit 6b15f2c16b2a5396855751edf2983bcc2d12520e)
-
-
10:46 AM pfSense Packages Feature #8869: HAproxy should use RFC 7919 DH parameter files
- Understood.
I now remember where I had stumbled upon this idea in the first place, it goes back to a few years bac... -
- Accommodating SSL testers that have no concept of proper security procedures isn't something we should aspire to do. ...
-
- If you did not need the patch, does adding the patch affect it negatively in any way? That is also an important quest...
-
04:57 AM Bug #8859: VTI: Some third-party vendors require rightsubnet to have a mask for VTI, rather than address
- Jim Pingle wrote:
> #1 Seems to be OK but could use more confirmation. Traffic from the firewall itself still leaves... -
- I added it to the list and bumped the package version to trigger a rebuild. It's up now for 2.4.4 and will go up with...
-
- Looks like it was never added to the port build list at https://github.com/pfsense/pfsense/blob/master/tools/conf/pfP...
-
- Where is the Filer package?
"PR #277":https://github.com/pfsense/FreeBSD-ports/pull/277 says "Merged" but I don't se...
10/16/2018
-
- I understand the intent behind the stock DH parameter files, however some SSL testers raise known DH parameters as so...
-
08:16 PM pfSense Packages Feature #9046 (New): telegraf feature request
- we want to monitor the ntp service in pfsense, Now I manully add lines into telegraf.conf then manually start it, it ...
-
- The AQM defaults to droptail when empty, but empty was being rejected as
invalid even though it was handled in the co... -
- The AQM defaults to droptail when empty, but empty was being rejected as
invalid even though it was handled in the code. -
- (cherry picked from commit 84963037949aaf5225ae664cfe9b4e3b037beee0)
-
-
- Applied in changeset commit:cd3cde526a9215e914c2f420c7e9c74b059a2ad0.
-
02:47 PM Bug #8964: IPsec async cryptography advanced setting - TCP traffic not passing through
- System -> Cryptographic:
AES-NI and BSD Crypto Device (aesni, cryptodev)
IPSec -> Advanced Settings -> Asynchrono... -
03:18 AM Bug #8964: IPsec async cryptography advanced setting - TCP traffic not passing through
- @Jim I mean "AES-NI and BSD Crypro Device"
-
- Applied in changeset commit:84963037949aaf5225ae664cfe9b4e3b037beee0.
-
- rc.bootup triggers a rc.package_reinstall_all in the background with a delay, to reinstall all packages in the config...
-
-
-
07:38 AM pfSense Packages Feature #9008: Add Zabbix 4 (agent and proxy) packages
- This can be closed.
Thanks! -
- It's entirely possible that the fixes referenced in the original description were only fully/completely integrated in...
-
01:27 AM Bug #8070: IKEv2 IPSec tunnel under load crashes pfSense when AES-NI is enabled
- Interestingly, it is seemingly working in 2.4.4-RELEASE. /var/etc/ipsec/ipsec.conf included for your entertainment:
...
10/15/2018
-
10:00 PM Bug #8964: IPsec async cryptography advanced setting - TCP traffic not passing through
- @luke they’re not for sale yet
@clinton please be more specific
@vladimir please explain how you enabled aes-ni on ... -
- Whoa, SG-1100 is out? Where do I get one?
-
- I see the same issues on a SG-1100.
-
- (cherry picked from commit e738a4c9b2607ad3561a0fce89d903535ca71249)
-
-
- This reverts commit bdb6021f79f222b2c7d732436800e96cb34ea973.
(cherry picked from commit dba7debb2e6be1ef469d99fa5e9... -
- This reverts commit bdb6021f79f222b2c7d732436800e96cb34ea973.
-
-
- (cherry picked from commit 89b4d4f30576908e36d5c6b70701db2f5e7363e6)
-
05:25 PM Revision f646afcf: Enable Zabbix 4 packages build
-
-
- Please re-read https://redmine.pfsense.org/issues/8956#note-3 and gather the requested information.
-
- Applied in changeset commit:5ae720be09a8976834cc424ead5c720f5fa2e64e.
-
- This should be a one-line fix but I had a follow-up question about the devices (nvd vs nvme) since their examples wer...
10/14/2018
-
07:21 PM Bug #8956: traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
- I just wanted to add that I am experiencing an issue with my limiter as well after upgrading to 2.4.4, but im not sur...
-
- Not enough info here for a valid bug report.
Please post on the forum at https://forum.netgate.com/ -- There are s... -
06:38 AM Bug #9043 (Not a Bug): openvpn 2.4.3-p1 -> 2.4.4, failed
- hi
After the update has stopped working normally openvpn for Pfsense + mikrotik v6.43.2 (Protocol TCP and Device mod... -
09:00 AM pfSense Packages Feature #9044 (New): Add SoftEther
- It would be nice if you can add SoftEther program. It supports OpenVPN and it has more functions than the simple Open...
10/13/2018
-
11:34 PM
Bug #8959 (Resolved): Restoring a <2.4.4 config with legacy gold auto backup package re-adds the menu option under Diagnostics
- On 2.4.5.a.20181012.2248, restoring a config with AutoConfigBackup installed does not result in a system with Diagnos...
-
09:31 PM Bug #9004: Default gateway IPv4 set to a group fails after restart on 2.4.4
- I thought I was going crazy, because I have this same configuration 2 wans (1 cable, 1 4G/LTE) in a gateway group. T...
-
06:27 PM Bug #9042 (Resolved): Web GUI does not recognise NVMe devices as SMART capable
- It looks like it's only looking for ad, ada or da devices:
https://github.com/pfsense/pfsense/blob/c0787ee92aeaa51ce... -
- > Samir Patel wrote
> ...Try Codel/Round-Robin. This seems to work and has been stable a couple of days now.
Than... -
01:28 PM Bug #8973: Traffic not going to Limiter queues
- Samir Patel wrote:
> Terence Kent wrote:
> > At this point, I've just disabled the limiters / queues. It's better f... -
01:34 PM pfSense Packages Todo #9041 (Resolved): update ntopng 3.6.0
- update ntoping to 3.6.0
and enable activity map
the latest version of pfsense seems dos not enable activity ... -
-
07:03 AM Bug #9040: Invalid status for OpenVPN Point-to-Point Links
- *Update*
- After trying on a fresh install on my VM, the issue seems to no longer be present.
Please disregard th... -
- *Background:*
If one defines multiple OpenVPN servers in a tun point-to-point mode (i.e. use a /30 subnet in the IPv...
10/12/2018
-
08:46 PM Bug #8973: Traffic not going to Limiter queues
- Terence Kent wrote:
> At this point, I've just disabled the limiters / queues. It's better for people to deal with t... -
- A quick data point to confirm what Victor and Samir observed:
* I run two pfsense boxes at different locations. Th... -
- Victor Preatoni wrote:
> I got that issue a few times too, syslog flooded, and then I had to manually reboot as pfSe... -
06:29 PM Bug #9039 (Rejected): radvd (IPv6) is broken on systems with a USB ethernet interface
- Bug 8429 addressed the regression that was introduced in 2.4.3 causing an error message such as "ioctl(SIOCGIFMEDIA) ...
-
-
-
08:52 AM Feature #9038 (New): Live view of any log file
- Is it possible to make an option where you can see the log files of PfSense in the webgui scrolling like a tail on li...
-
05:09 AM
Bug #9037: Unbound not logging to syslog after reboot
- Restarting syslogd from Status -> Services in the web UI also causes unbound to stop logging.
-
02:58 AM
Bug #9037 (New): Unbound not logging to syslog after reboot
- On my current installation (2.4.4-RELEASE (amd64)) unbound does not log to syslog after a reboot until unbound is res...
10/11/2018
-
06:49 PM
Todo #9026: PTI checkbox wording can be confusing, should give a little more detail and show current PTI status
- Tested on 2.4.5.a.20181011.0014, text for *Kernel PTI* now reads:...
-
- No, because there isn't a generic way to change a RADIUS password like that. It depends on the RADIUS server and its ...
-
11:21 AM pfSense Packages Feature #8769: Allow FreeRADIUS users to change their own Passwords and Pins
- Isn't this something that could be created as an add-on and not rely completely on the back end radius package?
-
- It is a duplicate of issue #5826 which covers the same request.
-
- I see this was changed to Duplicate
Can we change it to feature request? -
- Thank-you, it is not easy to find the correct/applicable entries in the forum.
I am not attempting dialogue so much ... -
- Duplicate of #5826
Please post questions "on the forum":https://forum.netgate.com before opening issues, this isn'... -
- In StrongSwan, the bypasslan feature is configurable for any interface.
However, in pfsense we are limited to only t... -
- I see this was changed to Not a Bug.
Can we change it to feature request? -
- We will have to agree to disagree.
We find it less convenient that the interface toggles between two methods of di... -
- It's done deliberately. Tabs are more convenient for short lists of interfaces. With longer lists of interfaces, drop...
-
- Request for feature change.
Why do the firewall rules list toggle between a URL list and a drop down? Why not just ... -
- Hiding the inactive interfaces makes it impossible to prestage configurations.
Please do not hide inactive interface... -
- This should be OK now, the public server wasn't picking up the latest copy of the content but we fixed the glitch.
...
10/10/2018
-
- (cherry picked from commit 8cc841364132b4fcf24bb314e8f746b01619d54d)
-
-
05:05 PM Bug #9033 (Resolved): bogons list outdated
- Hey all,
I've recently been allocated 103.123.164.0/22
it's on https://files.pfsense.org/lists/fullbogons-ipv4.txt
... -
- (cherry picked from commit 72b7b9a20e43e644035e44bd28b13f4e4bd775a5)
-
-
- Keeps the default of using CaptivePortal-<zonename> when not set,
otherwise uses the value supplied by the user as wi... -
- Keeps the default of using CaptivePortal-<zonename> when not set,
otherwise uses the value supplied by the user as wi... - 01:49 PM Revision 7ea27240: $str to $fqdn
- 01:47 PM Revision 2f002c9b: Compatibility requested
-
01:17 PM Bug #8791: Default IPv6 rules do not allow some devices to perform router or neighbor discovery
- This fixed IPv6 on my Android phone (Moto G4). Previously the Internet connection test would always fail after about ...
-
- Samir Patel wrote:
> Had to switch back to Taildrop/FIFO, though the limiters are no longer possible to monitor.
> ... -
- Applied in changeset commit:b1cc8f3143f7253bb3acdcdf8c18f9effaf3bce5.
-
-
-
05:23 AM Feature #9032: RADIUS MAC Authentication: display the login page when MAC auth failed
- Pull request : https://github.com/pfsense/pfsense/pull/4000
Forum thread: https://forum.netgate.com/topic/136138/af... -
- Since 2.4.4 the behavior of Radius MAC authentication changed.
In 2.4.3 user was redirected to the login page whe... -
- I can confirm this bug. My testing seemed to show that the behaviour was the same no matter which scheduler I assign...
-
01:10 AM Bug #8938: Installation of a package that depends on php72 on a version of pfSense older than 2.4.4-RELEASE breaks the pfSense install
- Thanks, Eduard, I will try it later this day.
10/09/2018
-
- Can see that our traffic shaper is nonfunctional now as of 2.4.4 in terms of per-host dynamic bandwidth shaping.
W... -
- Had to switch back to Taildrop/FIFO, though the limiters are no longer possible to monitor.
With QFQ, getting sudd... -
- Seeing same as all the aforementioned comments. Taildrop and FIFO do work, but don't show under Diag > Limiter Info. ...
-
- You should post on the Spanish language category of the forum -- https://forum.netgate.com/category/11/espa%C3%B1ol
... -
07:03 PM
Bug #9000: Haproxy does not send ipv6 traffic to backend after updating to Pfsense 2.4.4
- Jim Pingle wrote:
> Judging by this person's other reported issues, they have some general config/environment proble... -
- Judging by this person's other reported issues, they have some general config/environment problem wholly unrelated to...
-
12:25 PM Bug #9000: Haproxy does not send ipv6 traffic to backend after updating to Pfsense 2.4.4
- Works for me.. at least with current version:...
-
- (cherry picked from commit df99d3bf44dc0a254be305a25b8459f4cc5fe9a9)
-
-
- - Logout popup is disabled and no custom logout page is set
- Logout popup is enabled and logout_id is missing
(cher... -
- 06:01 PM Revision 176361d8: Review fix.
- (cherry picked from commit 8b6aae09e9f4607fc27066dff7a8f58c568f61f9)
- 06:01 PM Revision e4dc9b6f: Review fixes.
- (cherry picked from commit 0aa2f5f07ba64c3122b5f01656de3e7b0a673492)
- 06:01 PM Revision 7b5e4508: Enable setting AllowAgentForwarding value
- Fixes #8590
Signed-off-by: Sorin Sbarnea <ssbarnea@redhat.com>
(cherry picked from commit 1d835d945349d3c7b65c881559... -
-
- (cherry picked from commit 75444abd277a4a2afad3b5c52156a2c14153c508)
-
- 05:10 PM Revision f08369ec: change after review
-
03:43 PM pfSense Packages Bug #9031 (Resolved): Suricata fails to start with interface with /31 mask
- I have discovered that Suricata will not start in blocking mode when an interface has a /31 subnet mask when using an...
-
03:24 PM Feature #9030 (Resolved): Allow TLS Key Direction with OpenVPN
- Provide the user the possibility to define the direction for the TLS key in the Open VPN configuration
A pull requ... -
- When a user enters proxy details on system_advanced_misc.php it should trigger the firewall to use the proxy for thin...
-
01:17 PM Bug #8956: traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
- I think we should null-coalesce to "taildrop" for the AQM field to solve this issue, as that would be the default AQM...
-
02:11 AM Bug #8956: traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
- I reinstall 2.4.4 from the scratch did everything no changes now using 2.3.5 again until problems solved because i am...
-
- Happened to me as well... really screwed here. Cannot see previous queues in the GUI (under Limiters) and cannot appl...
-
- I'm OK with the PR as a new default but I still think we should allow the user to override the NAS ID as was possible...
-
- PR merged
-
01:05 PM
Bug #8590: sshd does not allow agent forwarding
- Applied in changeset commit:1d835d945349d3c7b65c88155948e607bcbfdf76.
-
- PR merged
-
- PR merged
-
-
-
11:43 AM Feature #4821: PPPoE WANs do not take full advantage of NIC driver queues for receiving traffic
- Adding the tunable: net.isr.dispatch=deferred fixed it for me to reach the full rated speed of my link.
Read the F... - 09:34 AM Revision cef01bcb: Update text
- 09:27 AM Revision 8698f918: Added tlsauth keydir options to openvpn client and server
-
08:58 AM Bug #8938: Installation of a package that depends on php72 on a version of pfSense older than 2.4.4-RELEASE breaks the pfSense install
- Dmitriy K wrote:
> I wonder why 2.4.3 wasnt included in the exclusion list? Unfortunately, now my home router is rui... -
- Dmitriy K wrote:
> I wonder why 2.4.3 wasnt included in the exclusion list? Unfortunately, now my home router is rui... -
- Those logs are expected, they are from PEAR and various other parts of PHP being upgraded. As long as the empty repor...
-
- Should be fixed now, thanks for reporting.
-
06:49 AM pfSense Packages Bug #9027 (Resolved): HAProxy: Unknown keyword lua-load
- After upgrading pfSense from 2.4.3_1 to 2.4.4 our haproxy didn't started anymore.
The error we got was `Unknown ke... -
- Duplicate of #8938
-
- I clicked on the update button next to the Acme package on the dashboard. This appears to have caused pfSense to try ...
10/08/2018
-
06:02 PM Bug #9024: Ping packet loss under load when using limiters
- The conf attached to the example https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/570 shows that t...
-
04:49 PM Bug #8915: After updating to 2.4.4-rc an empty crash report is shown
- Tried to replicate getting PHP crush report on SG-3100:
from version 2.4.3_p1 to 2.4.4 - RELEASE / no crush repo... -
- (cherry picked from commit 0123cb3202c19fd8ad288545720e3b5e6e56a0f6)
-
-
- It should be removed by the restore as its last act, since the data is taken out of config.xml and converted back int...
-
01:47 PM Bug #8994: Two RRDDATA Sections in Restored Config Breaks Unit
- There was no rrd section in the resulting configuration at all.
-
- Did you look far enough back in time on the graphs to see data from the date before the backup was taken?
I took a... -
- (cherry picked from commit 2ba7026de2c08450fa40d5694f44cbe46a2262e2)
-
-
- On 2.4.4 with IKEv2/EAP you can use multiple address pools based on the user name to effectively accomplish this. The...
-
- Applied in changeset commit:2ba7026de2c08450fa40d5694f44cbe46a2262e2.
-
- Now that there are "Intel CPUs in the wild unaffected by Meltdown":https://github.com/freebsd/freebsd/commit/9c0b8085...
-
05:15 AM Bug #9023: is_fqdn() validation
- Ulterior information on this patch:
As per php.net/manual/en/filter.filters.validate.php: FILTER_VALIDATE_DOMAIN
... -
01:00 AM pfSense Packages Bug #9025 (New): SquidGard + Target categories
- Hello,
An error occurs after applying the changes to SquidGard when:
Removing an unwanted target category from "T...
10/07/2018
-
- Could you please check if you are also experiencing latency spikes on LAN Interface during a reconnect (run a ping to...
-
02:03 PM Bug #9024: Ping packet loss under load when using limiters
- ok, so we just have a configuration guideline then: "Always put all traffic through the limiter". Do you have a conf ...
-
01:50 PM
Bug #9024: Ping packet loss under load when using limiters
- I saw this when only TCP/UDP was being put into the limiter. As soon as I changed it to "all traffic" the loss went ...
-
- I think https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/595 we have confirmed an issue still exis...
-
11:11 AM Bug #8998: All Captive Portal zones send only "CaptivePortal" as NAS Identifier
- It would be better for all installations to set the field for the nas-identifier back to the previous version. Otherw...
- 11:01 AM Revision b887348c: Properly detect valid trailing dots
- Count dots, detect a trailing one and remove it for counting. Must have at least 2 dots.
-
10:46 AM Bug #8970 (Assigned): Queues Menu item ends with ":"
- I tested on 2.4.5.a.20181006.1421 and I still see ":" for Status/Queue menu in German translation (see in attach scre...
- 10:20 AM Revision 895708c5: Improved domain validation
-
- Tested on 2.4.5.a.20181006.1421: after adding 25 device in the list, additional "Add" and "Wake All Devices" buttons ...
-
- Hello,
current validation doesn't follow any RFC guideline and it's pretty much broken.... -
12:50 AM Bug #8973: Traffic not going to Limiter queues
- using limiters with queues works fine with codel and fq_codel its just that we r not able to see it in limiter info a...
10/06/2018
-
- Not a bug. You can't policy route around IPsec in tunnel mode. The stack will drop replies because they didn't come v...
-
- -If the IPsec tunnel is disabled on site B, pings instantly start flowing. Enable and reconnect it, they stop again.-...
-
- Site A
Tunnel Local 172.25.234.0/24 Remote 192.168.223.0/24
Site B
Tunnel Local 192.168.223.0/24 Remote 172.25.2... -
02:24 PM pfSense Packages Bug #9020: Impossible to register ACME wildcard certificate regardless documentation
- Jim Pingle wrote:
> You have some kind of configuration error. I tried it again exactly as stated on the page and it... -
- You have some kind of configuration error. I tried it again exactly as stated on the page and it works.
-
- Documentation at https://www.netgate.com/docs/pfsense/certificates/acme-wildcard.html states what needs to be done to...
-
- I would also add to not confuse or mix both issue. One was due PHP reading ACLs permissions but no setting them up fo...
-
01:27 PM Bug #9021 (Closed): FreeBSD 11.2 fails to boot on Celeron J1900
- Did not see anything in recent issues covering this. Apologize in advance if duplicate.
On some systems, FreeBSD ... -
- Tried to set a very hard limit on my DownloadLimiter and seems to be shaping properly. Tested with testmy.net
-
- This is only about the icon on the button on the key registration page, and it is working properly now.
-
- This is so true, the UI always gives the "green" response regardless what catastrophic failure occurred, confusing us...
-
- #1 Seems to be OK but could use more confirmation. Traffic from the firewall itself still leaves via WAN as expected....
-
- Due to a problem with FreeBSD 11.2, Hyper-V NICs can't send IPv6 UDP traffic when transmit checksums are enabled.
... -
- Policy routing is working fine here. Most likely you have a problem with your configuration or rules. Please post on ...
-
-
- Seems good to me. It can be marked as resolved
-
-
- Seems good to me now. It can be marked as resolved
-
- Something is running your system out of RAM. There is not enough detail here to say what, if anything, is to blame.
... -
- dns resolver filed , when i locked to console i found this message
swap_pager_getswapspace(1): failed
swap_page... -
-
- - Logout popup is disabled and no custom logout page is set
- Logout popup is enabled and logout_id is missing -
06:12 AM Bug #8954: hn0: driver does not support altq
- This bug was also before, see isue #7869
https://redmine.pfsense.org/issues/7869#change-38548
-
05:26 AM Bug #8954: hn0: driver does not support altq
- Having exactly the same issue. Fresh install of pfSense under Hyper-V on 2012R2.
-
- I haven't upgraded yet. I think you should open a new bug report.
-
- The reason this field was removed was to standardize how RADIUS authentication was done in each pfSense module. OpenV...
-
- This bug only affects the logout popup and not custom logout pages. I committed a fix: https://github.com/pfsense/pfs...
10/05/2018
-
10:14 PM Bug #9017 (Not a Bug): Policy based Routing is not working
- I have following setup on my firewall.
2 internet gateways
WGW1 and WGW2
2 Vlans
Vlan 10 and Vlan 20
Created ... -
- As of ntp-4.2.6p5, it seems to require 'restrict -4 default' or to use 'restrict localhost' in ACL, what worked for m...
-
07:00 PM Feature #9016 (Rejected): Ability to create vpn user groups
- With a variety of other firewall and vpn solutions, the user is given the ability to create groups of users and gover...
-
- After further testing this appeared to be functioning as expected.
-
06:06 PM
Bug #9015 (Closed): Default gateway doesn't switch as expected
-
- After selecting Gateway Group (WANGW2 tier1 - WANGW1 tier2) under *System/Routing/Gateways* - *Default gateway sectio...
-
- Tried to replicate the issue in 2.4.4-RELEASE.
Under logs, I was getting only "Keep current gateway, its already ... -
- Tested restoring the original problematic config.xml. It did restore successfully but there was no rrddata in the res...
- 03:35 PM Revision dd8a6d75: Added #8976 Allow traffic graph settings to be saved
-
- Can't duplicate this here. Packages install and uninstall fine. Please post on the forum to discuss and diagnose the ...
-
02:12 PM Bug #9014 (Not a Bug): Unable to uninstall any Package via System -> Package Manager
- Trying to Uninstall any package via in the Package Manager hangs at "Please wait while the update system initializes"
-
01:46 PM
Bug #8452 (Closed): PPPoE :: Interfaces > WAN: [PPPoE Configuration] Service name :: colon not allowed (invalid character)
-
-
01:29 PM Bug #8452: PPPoE :: Interfaces > WAN: [PPPoE Configuration] Service name :: colon not allowed (invalid character)
- This issue can be closed as this has been resolved. Please see bug 9002. Thank you.
-
-
- Very Cool! I just tried it out and it works great!
Thank you so much for implementing this feature, I really appre... -
12:20 PM
Feature #8976 (Feedback): Status -> Traffic Graph, provide SAVE button for graph settings.
- Changes added. Commit hash: dd8a6d75e7a7cadc9a182c0306e8d04799a63338
It should now be able to save your settings to ... -
- This was fixed days ago. Update to the latest version of that package.
-
12:24 PM pfSense Packages Bug #9013 (Resolved): pfSense Crash: AVAHI_RCFILE undefined constant
- [04-Oct-2018 04:31:18 America/New_York] PHP Warning: Use of undefined constant AVAHI_RCFILE - assumed 'AVAHI_RCFILE'...
-
- Works now
-
11:25 AM pfSense Packages Bug #9012 (New): Captive Portal authentication in Squid Proxy Server does not work
- Version pfsense 2.4.4-RELEASE (amd64)
I have configured Authentication Method to "Captive Portal" in Squid Proxy Ser... -
-
- The attached patch adds @0.0.0.0/0@ to @rightsubnet@ and @leftsubnet@ which may make some third party devices happy, ...
-
-
12:09 AM Bug #9009: Cannot create Schedule
- pat lechriss wrote:
> Hello, when attempting to add a shedule i always get this php errors. Thx
>
>
> Crash rep... -
- There is no bug here that I can reproduce. I install snort, it's in the menu.
If there is a problem, it is specifi... -
02:38 AM Bug #9011 (Not a Bug): Snort not showing in menu
- Hi
I have an HA setup and on the secondary netgate XG-2758 the snort menu button is not showing after installation... -
-
12:01 AM Bug #9006: Using umlauts in client specific overrides common names field causes restore of old config backup
- verified. Works. thank you!
-
05:29 AM Bug #8998: All Captive Portal zones send only "CaptivePortal" as NAS Identifier
- We also need to get a unique NASID. Please fix this bug. Any solution will suit.
-
04:02 AM Bug #9010: Captive Portal Unable to logout
- Ming-Chang Cheng wrote:
> Version pfsense 2.4.4-RELEASE (amd64)
> I have configured captive portal with radius serv... -
01:51 AM Bug #9010 (Resolved): Captive Portal Unable to logout
- Version pfsense 2.4.4-RELEASE (amd64)
I have configured captive portal with radius server. Enabled "Logout popup win...
10/04/2018
-
08:58 PM Bug #8954: hn0: driver does not support altq
- Windows 10 Pro w/latest updates + Hyper-V.
2.4.3 was/is flawless. Upgraded to 2.4.4 and got this error and can't use... -
- (cherry picked from commit 4c3669ea8a9acf4657cd84e0ae22fb8809302756)
-
-
- (cherry picked from commit 7a97d81d81afa7ea86c8ad79bff8e203bc9457a4)
-
-
- Applied in changeset commit:4c3669ea8a9acf4657cd84e0ae22fb8809302756.
-
- Hello, when attempting to add a shedule i always get this php errors. Thx
Crash report begins. Anonymous machin... - 03:47 PM Revision 8b6aae09: Review fix.
- 03:45 PM Revision 0aa2f5f0: Review fixes.
-
- (cherry picked from commit 6e150fc0d022d231c7dc243ba68f4784f58973d5)
-
-
02:28 PM
Bug #8999: Nat rules do not work in pfsense 2.4.4 on hypervisor xen
- Chris Linstruth wrote:
> Right. And NAT works just fine on 2.4.4 on AWS. Please take this discussion to the pfSense ... -
02:11 PM
Feature #8976: Status -> Traffic Graph, provide SAVE button for graph settings.
-
10:27 AM
Feature #8976 (Assigned): Status -> Traffic Graph, provide SAVE button for graph settings.
- A possible temporary workaround if you haven't tried it already. There is a traffic graphs widget that allows for sav...
-
- I wonder why 2.4.3 wasnt included in the exclusion list? Unfortunately, now my home router is ruined because of updat...
- 01:22 PM Revision 245bfa55: Disable display of Diagnostics->AutoConfigBackup menu item if config is restored from pfSense < 2.4.4
- Fixed #8959
- 01:02 PM Revision e7299fd8: Add top buttons if table > 24 rows
- 12:51 PM Revision 1d835d94: Enable setting AllowAgentForwarding value
- Fixes #8590
Signed-off-by: Sorin Sbarnea <ssbarnea@redhat.com> - 12:40 PM Revision 84dc4a55: Fix German translation error. Also fixed in Zanata
- 12:24 PM Revision dac4cd09: Fixed #9002 - PPPoE Service Name may contain ':'
-
-
- https://github.com/pfsense/pfsense/pull/3995
https://github.com/pfsense/FreeBSD-ports/pull/580 -
What's new in Zabbix 4.0.0:
https://www.zabbix.com/documentation/4.0/manual/introduction/whatsnew400-
- Applied in changeset commit:7a97d81d81afa7ea86c8ad79bff8e203bc9457a4.
-
-
- Clicking VPN -> OpenVPN -> Servers
selecting: CSC Overrides
add new client and set as Common Name a word with u... -
- Not a known issue I'm aware of but probably not difficult to solve in a future release. Open a new issue with the spe...
-
- Too bad. Pfsense has problems with common names containing umlauts (ö ä ü) this way. Is this a known problem and work...
-
- Sir, you're awesome! This is exactly what i was looking for! ;) You deserve a cookie!
thank you very much! -
- You can still do that by making an override named @DEFAULT@ with blocking checked, and then define overrides for the ...
-
- Your overwrite idea is generally good, but a blacklisting makes no sense in this case. Only whitelisting is secure. W...
-
- You can already do this with overrides.
**VPN > OpenVPN**, **Client Specific Overrides** tab. Add a new entry with... -
- We're having enterprise internal CA and imported CA into pfsense. Having a single CA allows all certs that are not re...
-
- Applied in changeset commit:6e150fc0d022d231c7dc243ba68f4784f58973d5.
-
- I just pushed a change that should hopefully take care of this, under the assumption that some mismatch in how index....
-
-
08:54 AM Bug #9004 (Resolved): Default gateway IPv4 set to a group fails after restart on 2.4.4
- We set the default gateway IPv4 to be a group, called WAN_Failover. That group consists of WAN1 Fiber at tier 1 and ...
-
08:25 AM
Bug #8959: Restoring a <2.4.4 config with legacy gold auto backup package re-adds the menu option under Diagnostics
- Applied in changeset commit:245bfa559b5d8ebcb13b21feceaa58257ee194da.
-
08:24 AM
Bug #8959 (Feedback): Restoring a <2.4.4 config with legacy gold auto backup package re-adds the menu option under Diagnostics
- Diagnostics->AutoConfigBackup menu item suppressed
-
08:18 AM
Bug #9002 (Resolved): [Interfaces :: WAN :: PPPoE] The service name contains invalid characters
-
- Steve Beaver wrote:
> Service name may now contain ':' (and other non-alphanumerics)
I just edited the file on my... -
07:30 AM
Bug #9002: [Interfaces :: WAN :: PPPoE] The service name contains invalid characters
- Applied in changeset commit:dac4cd09699bdafa5bcf1cf7b699438e5f669b26.
-
07:27 AM
Bug #9002 (Feedback): [Interfaces :: WAN :: PPPoE] The service name contains invalid characters
- Service name may now contain ':' (and other non-alphanumerics)
-
06:49 AM
Bug #9002: [Interfaces :: WAN :: PPPoE] The service name contains invalid characters
-
- I am able to add a colon in the "service name" when I configure "PPPoE" using the "Setup Wizard".
I am not able to... -
08:05 AM
Feature #8943 (Feedback): Additions to wake on lan section
- Top buttons are added if the table is > 24 rows
Items 2) and 3) may be addressed in a later release.
-
07:41 AM
Bug #8970 (Feedback): Queues Menu item ends with ":"
- Error was in de_DE translation file. Fixed there and in Zanata
-
07:37 AM
Bug #8970 (In Progress): Queues Menu item ends with ":"
-
07:34 AM
Bug #8970 (Feedback): Queues Menu item ends with ":"
-
- Far more likely is that it is working properly but just not showing the traffic in the queues in the diagnostic outpu...
-
-
- mpd5-5.8_8 imported
-
06:51 AM pfSense Packages Feature #9003 (Resolved): Add 'Copy Running to Saved' option to the raw config
- Would be possible to add these buttons to the raw config page as the Quagga package does, i'm slowly moving over to u...
-
- Another weight for the first Option: If i Restore a Backup from an old Version (also in case of update) the field is ...
10/03/2018
-
- Right. And NAT works just fine on 2.4.4 on AWS. Please take this discussion to the pfSense forum at https://forum.net...
-
09:58 PM
Bug #8999: Nat rules do not work in pfsense 2.4.4 on hypervisor xen
- Chris Linstruth wrote:
> My entire test VM lab is currently XenServer 6.5. Nothing there changed from 2.4.3_1 to 2.4... -
- My entire test VM lab is currently XenServer 6.5. Nothing there changed from 2.4.3_1 to 2.4.4 through the entire 2.4....
-
02:58 PM
Bug #8999: Nat rules do not work in pfsense 2.4.4 on hypervisor xen
- just think for a moment that it may be the first report. in larger communities i had to make the first report before,...
-
- You need to post on the forum and discuss the issue in depth there before jumping to a conclusion that it's a bug and...
-
01:59 PM
Bug #8999: Nat rules do not work in pfsense 2.4.4 on hypervisor xen
- Jim Pingle wrote:
> There is not enough data here to suggest it's actually a problem in pfSense. Please post on the ... -
- There is not enough data here to suggest it's actually a problem in pfSense. Please post on the forum and discuss the...
-
10:00 AM
Bug #8999 (Not a Bug): Nat rules do not work in pfsense 2.4.4 on hypervisor xen
- After upgrading from pfsense 2.4.3_1 to 2.4.4, nat rules in the firewall do not allow packets to pass through.
npt w... -
- This is weird, but if configuring Limiters with CoDel AQM and QFQ Scheduler, it works. Problems exists with default A...
-
- (cherry picked from commit 9386784480f27d6b04ebf013f691522130a7f013)
-
-
- (cherry picked from commit 45ff6b8f1d574b3786d25286abc4978427675974)
-
-
- Also add a few new tags to be masked. See Factory #1170
(cherry picked from commit 9858a361b81daa9465e61a93c205bfd98... -
- Also add a few new tags to be masked. See Factory #1170
-
06:11 PM Bug #8977: Dynamic DNS - Custom (V6) - Throws Error "php-fpm: /services_dyndns_edit.php: phpDynDNS: (ERROR!) No Hostname Provided."
- I can provide some feedback, that I manually edited the file in the same manner as the patch on the same day I submit...
-
- Applied in changeset commit:45ff6b8f1d574b3786d25286abc4978427675974.
-
-
- Applied in changeset commit:9386784480f27d6b04ebf013f691522130a7f013.
-
- The rrddata case is special because of the way the backup process injects the data into the config before serving the...
-
12:01 AM Bug #8994: Two RRDDATA Sections in Restored Config Breaks Unit
- I don't think this is limited to <rrddata>, any duplicate tag in the config will break imports, I've confirmed with <...
-
02:34 PM Bug #8995: MTU Trouble with Orange is back
- France Orange OK :)
pppoe2: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet 81.2... -
- Eugene Grosbein - 2 hours ago
Thank you, these logs were very useful. Here is one more patch chunk missing from pr... -
- pfSense 2.4.4 uses mpd5-5.8_7. You can check that running `pkg info mpd5` on console. The only differences from FreeB...
-
- As discuss here https://sourceforge.net/p/mpd/bugs/62/?page=1 I have MTU trouble with the last 2.4.4.
Eugene is aski... -
- Confirmed fixed by other forum users who hit the same issue: https://forum.netgate.com/topic/136288/squidguard-and-mu...
-
- Fix pushed in squidGuard pkg version 1.16.18_1 which will be up shortly.
-
- Probably something similar to what I fixed yesterday in ACLs. I'll take a look.
-
08:17 AM pfSense Packages Bug #8997 (Resolved): squidGuard Times does not accept more than one value
- squidGuard Times does not accept more than one value. (PFSense 2.4.4, squid 0.4.44_5, squidGuard 1.16.18)
On the... -
11:12 AM Bug #8954: hn0: driver does not support altq
- Dmitry Ivanov wrote:
> hyper-v 2016
> gen1 and gen2
same here, using windows server 2016 on pfsense 2.4.4 -
- Some mail servers do not use a certificate that can be validated by the current code (e.g. custom self-signed CA or c...
-
10:06 AM
Bug #9000 (Not a Bug): Haproxy does not send ipv6 traffic to backend after updating to Pfsense 2.4.4
- After the update, the accesses from ipv6 addresses do not work in any case. Before the update worked perfectly.
Ac... -
09:46 AM pfSense Packages Bug #8945: SquidGuard ACL blacklists
- I had to make a clean install, but it is working for me as well ! Thanks a lot for your support guys
-
-
01:16 AM pfSense Packages Bug #8945: SquidGuard ACL blacklists
- Works again. Thank you
-
- Great Thanks a lot. It works fine in my pfsense
-
- Before 2.4.4, each Captive Portal zone had a configurable NAS Identifier. With multiple zones, each instance could us...
-
-
07:57 AM pfSense Packages Bug #8996: pfBlockerNG not like CloudFlare DNS
- Sorry - issue already resolved in devel version.
-
- Hi all, pfBlockerNG use IP 1.1.1.1 is list of IPs is NULL, so any time list is null CloudFlare DNS can be banned, fil...
-
- I got exactly the same error inside the crash reporter, including the max memory size even if my pfsense machine has ...
-
- New version merged to 2.4.4 branch
10/02/2018
-
10:03 PM Bug #8935: IGMP Proxy not starting with PPPoE IF
- I can say that the vlans are working again.
Thanks ! -
- Replicated in 2.4.4-RELEASE
Steps to replicate:
Configure Gateway Group with 2 WANs
Start Tier 1 down, Tier 2 up... -
- (cherry picked from commit 5a7035523e9f70fa568d688915bf4aed2f0aac41)
-
-
-
-
- I added a note to the upgrade guide pointing back here and offering a workaround. Thanks for confirming the details!
-
03:21 PM Bug #8507: FreeBSD 11.2-BETA dhclient always uses server MTU value
- I suspect that might be happening to people. Thank you for being so attentive on this.
-
- If you check the box and save, it will overwrite the default DHCP values with what is in the boxes for **Protocol Tim...
-
- Is it possible that just toggling the visibility of the advanced settings box to on and then saving and applying woul...
-
- No, that setting would not do it on its own, as it is handled in a different way.
It only happens when @adv_dhcp_c... -
- So a setting to reject leases from the cable modem itself in *DHCP Client Configuration* might cause this too, as wou...
-
- No, I mean settings in the **DHCP Client Configuration** box on the WAN when **Advanced Configuration** is set, like ...
-
- Got it, thank you.
By advanced DHCP client options, do you mean specifying an MTU for the interface? If that wo... -
- It's @\t@ for a tab, then supersede.
-
- I think I see a typo in your diff. "tsupersede".
-
- Looks like there may be two ways this could happen:
#1: If you used advanced DHCP client options that clobber the ... -
- My copy of /etc/inc/interfaces.inc matches, and contains the line.
-
- I suspect that a prior hard setting of MTU on the interface may be interfering with the propagation of the fix in dhc...
-
- https://github.com/pfsense/pfsense/blob/master/src/etc/inc/interfaces.inc#L4990
The line should always be there by... -
- All I know is that I needed to affirmatively set "supersede interface-mtu 0" in the option modifiers for the WAN conf...
-
- We already set that (see the linked commit above).
My edge firewall failed horribly because my ISP sent the MTU ev... -
- This is still causing problems in pfSense 2.4.4-RELEASE.
I believe that the upstream patches to FreeBSD introduce ... -
- Fixed in squidGuard pkg v 1.16.18 which will show up shortly.
-
-
- (cherry picked from commit 67807c9536ae1810a067155049c96e8d2b634777)
-
-
- Temporarily, If I wanted to edit the files that choose the default options for the graph, which file would I need to ...
-
- Had a user present a configuration backup with two rrddata sections.
Looked like this:
<rrddata></rrddata>
<rr... -
-
- Tested on 2.4.3_1 - I was able to see Acme package which depends on php72 but wasn't able to install it.
Tested on ... -
10:24 AM Bug #8980: Disabling hardware checksums does not disable IPv6 transmit checksum
- -- drive by coder --
What it looks like is that in pfSense.c (FreeBSD-Ports) the IFCAP_RXCSUM_IPV6 & IFCAP_TXCSUM_... -
09:46 AM
Feature #8947 (Resolved): Cron based ACB option
- While there are more simple ways to configure the timing, there is no more flexible way than direct crontab entry. If...
-
- Functionality to perform config backups via cron instead of on every change is added and works as expected. Tested in...
-
- Applied in changeset commit:67807c9536ae1810a067155049c96e8d2b634777.
-
- ...
-
- It is not a bug because HA requires both nodes to be on matching versions, and this error could only happen if they d...
-
- Why is it not a bug?
I upgraded from 2.4.3 to 2.4.4 and directly (!) i get the errors on the dashboard. Every secord... -
- Your 2.4.3 system may have tried to call that function on the 2.4.4 system, where that function no longer exists.
... -
- After Update go 2.4.4 i get a lot of errors shown:
PHP ERROR: Type: 1, File: /usr/local/www/xmlrpc.php(140) : eval... -
08:51 AM Bug #8954: hn0: driver does not support altq
- Das gleiche Problem mit Hyper-V 2012, gen1
-
- If you read through https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/ that appears to be harmless....
-
08:30 AM Bug #8991 (Not a Bug): Codel limiter generating error in system log and console
- After configuring Codel limiters like shown on the Netgate YouTube video for 2.4.4 I noticed this message constantly ...
-
- To make sure someone doesn't get the wrong idea based on that last note:
The errors mentioned above are covered in... -
- Multiple users have negative feedback (see #8989 ).
I submited another PR to fix the issue : https://github.com/p... -
- Steve Wheeler wrote:
> You can test this in a 2.4.5 snapshot. Just choose the development branch in Update Settings.... -
- Florian Apolloner wrote:
> I have acme, Cron, haproxy, Netgate_Coreboot_Upgrade and openvpn client export installed.... -
07:47 AM Bug #8933: diagnostics -> backup/restore -> reinstall packages hangs
- I have acme, Cron, haproxy, Netgate_Coreboot_Upgrade and openvpn client export installed. Can you link me the patch? ...
-
- Nothing unusual on the boxes where I could reproduce this. Common things like ACME, nmap, OpenVPN client export, sudo...
-
- You can test this in a 2.4.5 snapshot. Just choose the development branch in Update Settings.
However I was not ab... -
- PR merged
-
04:28 AM pfSense Packages Bug #8989: [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- See https://forum.netgate.com/topic/135894/solved-freeradius-doesn-t-start-after-a-pfsense-2-4-4-fresh-install-and-re...
-
- This is my fault. I have to appologize for this error, sorry.
see #8927 -and https://github.com/pfsense/FreeBSD-p... -
- Same here - Radius won't start after Update anymore
-
02:48 AM Bug #8990 (Resolved): Additional BOOTP/DHCP Options per host
- Hello,
I do not find option to add additional boottp option *per host*. I have system that get custom option via DHC...
10/01/2018
-
10:24 PM pfSense Packages Bug #8989 (Resolved): [Freeradius] not starting radiusd -X | Errors reading /usr/local/etc/raddb/dictionary: dict_init: /usr/local/etc/raddb/dictionary[6] invalid entry
- freeradius is not starting after latest update, i figured out the issue.
radiusd -X show:
@Errors reading /usr/... -
07:34 PM Bug #8956: traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
- Dir Jim,
i attached the requested data -
- This does not affect all users on 2.4.4, or all users who upgraded, and the priority reflects that. We intend to have...
-
07:29 PM Bug #8988: just updated to latest version 2.4.4 Crash report!
- Jim Pingle wrote:
> Either these are harmless errors from the upgrade process, or you might have a problem with the ... -
- Either these are harmless errors from the upgrade process, or you might have a problem with the pfBlockerNG package. ...
-
- Crash report begins. Anonymous machine information:
amd64
11.2-RELEASE-p3
FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0... -
- Ok in both cases it was using v6 localhost as source, ::1/128.
Using that I was able to duplicate the original bug... -
- I'm unable to duplicate the original issue in 2.4.4 or 2.3.5p1.
In both 2.4.4 and 2.4.5 setting a custom ACL does ... -
- Looks good.
Tested in:... -
- In 2.4.4 the monitor IP of another gateway is shown:...
-
- PR merged. Thanks!
-
- As mentioned on the forum ( https://forum.netgate.com/topic/135679/pfsense-2-4-4-freeradius-mac-address-authenticatio...
-
- Fixed in:...
-
- I've cherry-picked recent changes from FreeBSD ports tree. 0.2.1_1,1 will be available in the next round of 2.4.5-DEV...
-
-
- Unable to replicate this in either 2.4.4 or in:...
-
- There are several things on the dashboard that need working DNS and connectivity, like the update check, packages wid...
-
12:22 PM Bug #8987 (Resolved): Web GUI main page very slow to load if wan interface is enabled but not connected.
- Hi,
I noticed this annoying bug in pfSense 2.4.4:
by configuring the wan interface and leaving it disconnected,
t... -
- It looks like they are hitting #8945 -- but yes, it has nothing to do with this bug. Rather than opening a new issue,...
-
12:22 PM Bug #8518: Rule Error On Upgrade 2.4.3 -> 2.4.3-p1
- vishant kamboj wrote:
> am not able to set target rules in squidguard proxy filter. once we add rule after apply the... -
12:12 PM Bug #8518: Rule Error On Upgrade 2.4.3 -> 2.4.3-p1
- am not able to set target rules in squidguard proxy filter. once we add rule after apply then we check these rules it...
-
- Nothing intelligible here. Most likely a duplicate of #8945
Post to the forum if that is not the case. -
11:06 AM pfSense Packages Bug #8986 (Duplicate): Clear SQUID GUARD
- No set options list access squidguard
clear error !!! save button -
10:56 AM
pfSense Packages
Bug #8984 (Feedback): stunnel: Illegal string offset and other PHP hiccups (due to PHP upgrade)
- This was corrected in stunnel 5.37
-
- There is some ongoing work happening on the stunnel package, this is likely already fixed in the development version ...
-
- The last major upgrade of the PHP packages caused this: ...
-
-
09:10 AM pfSense Packages Bug #8871: Suricata: input not validated properly in suricata_rulesets.php results in wrong argument passed to in_array()
- The variable _$enabled_rulesets_array_ is populated by the PHP code as it reads the config.xml configuration for the ...
-
- Seems to have been fixed silently, or through a different component or such, but no updates recorded here...
-
- At the moment, to support storing additional data in an array of disks or just a single storage media, we must levera...
-
07:29 AM Feature #8983 (Duplicate): Possibility of using alias/fqdn in the GRE tunnel peer identity
- At the moment, one must define remote GRE peer by IP. Would it be possible to also use alias/fqdn? This would allow f...
-
- Marcel Beerli wrote:
> Then it looks like its in pfSense 2.4.4 not in the packages.
> Lets hope it gets addressed i... -
- Then it looks like its in either of the 2 packages. (squid or squidGuard), probably squidGuard
-
- I was on release 2.4.3-RELEASE-p1 (amd64) and did package updates to
squidGuard -> 1.16.17_3
squid -> 0.4.44_5
... -
- When defining ACLs with the GUI, it would be nice to have support for matching against a map for "Host matches:" type...
09/30/2018
-
09:45 PM Bug #8981 (Resolved): Uncheck DHCP registration does not clear entries
Uncheck the DHCP registration box in Unbound setting GUI should clear the contents of /var/unbound/dhcpleases_entri...-
09:05 PM Bug #8864: SSH Guard Sensitivity/Whitelist on 2.4.4
- Is it possible to simply disable sshguard?
-
06:01 PM Bug #8935: IGMP Proxy not starting with PPPoE IF
- Tim Balmer wrote:
> I now replaced the default igmpproxy binary on pfSense 2.4.4 by this version https://pkg.opnsens... -
- Looks like we'd have to check like they did on FreeNAS, if @sysctl -n machdep.bootmethod@ returns UEFI then we can se...
-
- The loader values 'console="vidconsole"'or 'console="vidconsole,comconsole"'are invalid for systems booted UEFI where...
-
- Duplicate of #8967, already fixed for the next release.
-
11:36 AM Bug #8979 (Duplicate): DNS Forwarder broken in 2.4.4
- After upgrading to 2.4.4 Services / DNS Forwarder seems broken:
Crash report begins. Anonymous machine information... -
- system_advanced_network.php, checking "Disable hardware checksum offload" disables most checksum options but not TXCS...
-
- Looks good. Functions as expected:...
-
-
- This looks good now. Tested in:...
-
- Your issue is different. You need to start a thread on the "forum":https://forum.netgate.com to discuss it and diagno...
-
07:38 AM Bug #8971: filterdns doesn't start after upgrade from 2.4.3 to 2.4.4
- Not sure if this is the best place to post, but the symptom in the original poster’s screenshot is also what we’re se...
-
06:59 AM Bug #7308: ZFS installer - check storage capabilities
- error is still there for me on SG-2220 with 2.4.4 CE
Even when I reduce the swap to 0. -
06:53 AM Bug #8956: traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
- Priority "Normal"? This issue is a desaster for the QoS of the complete network! Is there any workaround which can be...
09/29/2018
-
- The Dynamic DNS - Custom (v6) when it runs, throws the following error, even though it successfully updated:
php-fpm... -
-
- I noticed that the GUI is now allowing me to save values higher than 7 for PRIQ! I also see that you can now save a v...
-
I like to view the traffic graph often as a quick way to view which host is using bandwidth and how much.
Howe...-
- I temporary blocked the loop by disabling the OPT interface associated with tap0:...
-
- Yes, the fix is in release and it is currently working on our test systems. If you still have a problem, start a thre...
-
02:40 AM Bug #8603: PPP WANs do not work on VLANs on current snapshots
- Did this fix made it in the 2.4.4 release? I just upgraded to 2.4.4 stock and it looks like i’m hitting this issue, m...
-
- For the original issue,...
-
12:15 AM Bug #2218: CARP VIPs can become master too early at boot time
- Hi there, is see the point of @Seb A,. I am prepare two pfsense with CARP IPs for our data center. We made some tests...
09/28/2018
-
- Just some additional feedback.
I reinstalled squid, did not work.
then I uninstalled squid.
then I installed squid... -
- There is no longer a general problem here. Read the last comment on #8832 again.
Uninstall the package and then in... -
- Running on PC Engines APU2, pfSense 2.4.4, squid 0.4.44_5 and squidGuard 1.16.17_3
Service c-icap is not starting ... -
- Any indication when this is getting fixed?
Its in PackageProxy filter SquidGuard: Common Access Control List (ACL)Co... -
- (cherry picked from commit 32a7f1612b79ad04cc252d0a5e217c857b00024d)
-
-
- Remove redundant settings stored in the wrong place
Store all ssh settings in the same place
Initialize this array be... -
- Remove redundant settings stored in the wrong place
Store all ssh settings in the same place
Initialize this array be... -
-
03:00 PM Feature #8947: Cron based ACB option
- And the ability to use both scheduled and automatic backup after each change.
-
02:59 PM
Feature #8947: Cron based ACB option
- Would be more intuitive if the configuration options for scheduling backups used dropdowns or some other input method...
-
- Applied in changeset commit:ec439957ce0f70778d89f57eba9553e2afba874a.
-
- A few other notes:
* @$config['system']['sshd']@ appears to be redundant, the setting stored under @$config['syste... -
- The @sshdkeyonly@ setting is a bit confused about where it should be. Some references have $config['system']['ssh'] a...
-
- (cherry picked from commit 988b786d0bc8753a7427aaa693effd6018658770)
-
- (cherry picked from commit fd4dc22e73a43c644e8972923c98abb86a27889c)
-
-
- Typo fix for this as well commit:f31ef5aa0e777c236fb175778e63b9e26a9d2627
-
11:03 AM Bug #8868: multiple php errors on update
- Jim Pingle wrote:
> If you saw these errors while still on 2.4.3, it's more likely due to an issue such as #8938 and... -
- OK, so your issue is not with filterdns, and this is not a bug, it's a side effect of your real root issue.
We can... -
10:40 AM Bug #8971: filterdns doesn't start after upgrade from 2.4.3 to 2.4.4
- On my CE system running in a VM, /var/run/booting does not exist. filterdns did not show up in processes. when sav...
-
- I do not believe this is a widespread problem. In part due to the fact that if it were, we'd see a lot more feedback ...
-
- Adrien Carlyle wrote:
> I can add that I'm running 1 CE instance in a VM that appears to have the process running bu... -
- So on my SG-3100, I tried to run the process manually and the following output happens. ...
-
- This bug may be related to #8956
But it's a different situation...
To get around bug #8956 I just manually delete... -
10:08 AM Bug #8489: DHCPv6 Client Failure to Initialize with "Do not wait for RA"
- And to which other issue is it related?...
-
- That's a different error than the others, and most likely a separate issue.
-
- i have the same problem since 2.4.3
my pfsense is running on bare metal
here a few logs:... -
-
-
-
- The moment you give a user any control over 2, it starts trying to replace 3. 2 should just be completely hand-off au...
-
- Uninstall squid and then reinstall. If it still won't start, then it's not this issue. Start a new thread on the foru...
-
- This is most likely a hardware/chipset quirk on your environment and not a bug per se.
I run several boxes like th... -
02:35 AM Bug #8972: VLANs on LAN and no VLAN on WAN --> pfsense "crashes" respectivly not operable
- Edit: Setting the network speed to a fixed value (100 half/full duplex or 1000 half/full duplex) on the ports at pfse...
-
- Maybe a bug, I don't know - found a solution too...
Hardware for pfsense (since 2.2.x):
Intel Celeron J1900 with ... -
-
02:23 AM
pfSense Packages
Bug #8966: Patches page uses GET instead of POST when performing actions
- It seems to be fixed now. Thanks for the quick turnaround.
-
- (cherry picked from commit f31ef5aa0e777c236fb175778e63b9e26a9d2627)
-
-
- Repeated the same tests with different combination of HW:
SG4860 <--> SG2440 with enabled Async crypto on both sid...
09/27/2018
-
- upgraded to squid 0.4.44_5 but c-icap is still not starting.
-
- I'm not too sure on that, I'm running an intel based system here at my house which has similar problems.
Actual... -
08:24 PM
Bug #8971: filterdns doesn't start after upgrade from 2.4.3 to 2.4.4
- Adrien Carlyle wrote:
> I can add that I'm running 1 CE instance in a VM that appears to have the process running bu... -
- I can add that I'm running 1 CE instance in a VM that appears to have the process running but it's filterdns process ...
-
08:02 PM
Bug #8971: filterdns doesn't start after upgrade from 2.4.3 to 2.4.4
- I can't reproduce this on my setup (2.4.4 running x64 under KVM)
I added a test host, added a rule that allowed it... -
- After upgrading firewalls to 2.4.4 I'm noticing that any FW rules which use an alias with an FQDN name are not workin...
-
- Yeah that was due to a syntax error I made in the previous commit. Fix has been pushed, update and try again
-
06:42 PM
pfSense Packages
Bug #8966: Patches page uses GET instead of POST when performing actions
- I'm not entirely sure this related, but I just upgraded a system to 2.4.4 which picked up the new System Patches v1.2...
-
- Fixed in System Patches v1.2, which will show up shortly.
-
- When the patches page system_patches.php is used to apply or revert a patch, the link in the cookie trail area of tha...
-
-
- (cherry picked from commit 651b4dcb4ed2dc1404cd532a2a53190e77cbcbc4)
-
-
- Behavior of 1 and 3 are clearly defined (i think), no argument there.
But 2 'automatic' still needs some informati... -
- Pi Ba wrote:
> Control over 'gateway switching' ~= 'automatic' is done by the order of the list. Not having control ... -
- Control over 'gateway switching' ~= 'automatic' is done by the order of the list. Not having control over that order ...
-
- Pi Ba wrote:
> Jim Pingle wrote:
> > Automatic should just be like the old gateway switching option going down the ... -
- Jim Pingle wrote:
> Automatic should just be like the old gateway switching option going down the list of gateways l... -
- But that's what the gateway group is for. I don't see any good reason to have two mechanisms to do the same thing. Th...
-
- I'm sure you remember the old 'gateway switching' option? It used the gateways in order they were listed as well.. (w...
-
- There shouldn't be an "order of importance" on the list of gateways though. That's what the default gateway group is ...
-
- I'm not intending things to be 'alphabetically', i want them to be in the order of importance. As for saving things, ...
-
- But moving something to the top by ordering it alphabetically is a kludge. I don't think we should go out of our way ...
-
- Forgot to 'watch' this issue, so replying a little late (thanks for the github question/copy i did get notified by).
... -
- At least in the German translation, the Status -> Queues Items (Warteschlangen) ends with a : sign. I would expect it...
-
- - "IP" -> "IP address"
- don't specify gw on route delete (not needed as per jim-p
- helptext: remove '.' for consist... -
- Not enough info here. Probably you have hit an issue with pfBlockerNG-devel -- see https://forum.netgate.com/topic/13...
-
03:03 PM Bug #8969 (Rejected): pfSense has detected a crash report or programming bug
- After upgrade to version 2.4.4-RELEASE (amd64) appear errors:
Crash report begins. Anonymous machine information:... -
- Patches imported from FreeBSD releng/11.2 into RELENG_2_4_4
-
- ACL issue is a duplicate of #8945
icap issue is a duplicate of #8832 -
- Hi,
running with pfsense 2.4.4 with squid 0.4.44_4 and squidguard 1.16.17_3
when Squid Guard Proxy Filter - Group A... -
-
12:55 PM pfSense Packages Bug #8945: SquidGuard ACL blacklists
- I had to rollback too...
-
- Applied in changeset commit:651b4dcb4ed2dc1404cd532a2a53190e77cbcbc4.
-
- https://www.reddit.com/r/PFSENSE/comments/9je1ar/244_php_error/...
- 12:33 PM Revision bb7cabdb: Simplify schedule validation
-
- submitted in the form data.
(cherry picked from commit c818076d474c45d5da283d20baab6f8a0d67a540) -
-
- (cherry picked from commit 2e49073226a9795667c79c9f09f0111895b4f2be)
-
- Effectively override any default setting.
(cherry picked from commit c2d8c3c8e3e21540f093f69d2ccba6020bc413d0) -
- (cherry picked from commit e0f12d6bfd604c79ac9bf8f7dce5daa68b8c0d1a)
-
- Reported in redmine https://redmine.pfsense.org/issues/7609
(cherry picked from commit d73918f2a241f5b072a8b9fd2e29b... -
-
11:52 AM Revision 0a72eb0b: enable ip send for FreeDNS DynDNS update
- without this, only legacy IP records get updated correctly.
redmi ticket: https://redmine.pfsense.org/issues/8924
(... -
-
- move conditional before platform_booting
and join w && instead of indenting
(cherry picked from commit b974f79a368b2... -
- and gateway failure events. Try to make the logs readable again,
while still allowing verbose logging if needed via a... -
-
- With the constellation of tunable workarounds for hardware-based security bugs, it might be helpful to build a table ...
-
- PR merged
-
- PR merged
-
- PR merged
-
- PR merged
- 03:15 AM Revision c9216659: Fix typo in error msg
-
- Test setup:
Windows <-> SG2220 2.4.4-rel <---IPSEC---> SG3100 2.4.4-rel <-> Windows
IPsec (tunnel mode) with fo... -
01:24 AM Bug #8963: 2.4.4 Limiters don't work after CARP fail-over
- For those of us on WAN connections who pay for bandwidth consumed over our limit, bursting to my WAN circuit's 300Mbp...
-
- Limiters are not applied when using HA, states are being synced with pfsync, and a CARP fail over occurs.
When Fir...
09/26/2018
-
09:55 PM Revision fe49c700: Use poudriere_bulk.$TARGET_ARCH instead of poudriere_bulk.$TARGET.$TARGET_ARCH for the arch bulk list.
- (cherry picked from commit bd936941a3cb5e381c4bba8f9245a748cf93206d)
-
-
- (cherry picked from commit deb5f1dacf9579052dd275c93035adbf4ae1814e)
-
-
- (cherry picked from commit 157aff9e256aa235ba68ccc2168c61fc61e90072)
-
-
- This bug causes the Monitor IP to appear even when a gateway
is unmonitored. The monitor IP from the last gateway in ... -
-
- Also, i18n
(cherry picked from commit 42c059894a4a521415c35dc048952658f61fad65) -
-
06:43 PM Bug #8489: DHCPv6 Client Failure to Initialize with "Do not wait for RA"
- Just updated to 2.4.4 and lost IPv6...
I am also running pfsense as a Gen2 hyper-v guest.
My NIC is an Intel I... -
- Hyper-V appears to be the common factor but as far as I can see, nobody has attempted to take the exact same config/e...
-
12:47 AM Bug #8489: DHCPv6 Client Failure to Initialize with "Do not wait for RA"
- More people get this bug now in the 2.4.4 release. It seems the common part is that pfsense is running as hyper-v VM....
- 06:41 PM Revision ebbc9e97: Default ACB schedule to every day at midnight
- 03:48 PM Revision e46ea2c6: Fixes #8949 Looks like there was 2 variable names for the same variable shownetboot and netboot. It now just uses the variable name netboot
- 03:28 PM Revision a1aa91de: Added scheduled config backup
- Fixed: #8947
-
- Applied in changeset commit:157aff9e256aa235ba68ccc2168c61fc61e90072.
-
- A gateway description with double quotes breaks the JSON used to form the gateway drop-down options, resulting in a b...
-
- PR merged
-
- PR merged
-
- PR:
https://github.com/pfsense/pfsense/pull/3992 -
- I found a bug and some cobwebs in *status_gateways.php*
The bug causes the *Monitor IP* to displayed incorrect inf... -
02:42 PM Bug #8935: IGMP Proxy not starting with PPPoE IF
- Johannes Wanink wrote:
>Thx!
>Tried the binary, and looks good! Seems to be working.
> (Binary is much bigger than... -
02:25 PM Bug #8935: IGMP Proxy not starting with PPPoE IF
- Tim Balmer wrote:
> I now replaced the default igmpproxy binary on pfSense 2.4.4 by this version https://pkg.opnsens... -
- I now replaced the default igmpproxy binary on pfSense 2.4.4 by this version https://pkg.opnsense.org/FreeBSD:11:amd6...
-
09:18 AM Bug #8935: IGMP Proxy not starting with PPPoE IF
- Alexandre Paradis wrote:
> Vlan/sub-interface are also affected.
Same issue with "bridge" interface.
-
- With the release of 2.4.4 we enabled `Asynchronous Cryptography` by default, we are seeing cases where traffic does n...
-
- move conditional before platform_booting
and join w && instead of indenting -
-
11:56 AM Bug #8949: DHCPv6 Server Network Booting fails to be set
- I have confirmed that this now works as expected. Thank you for the quick fix.
-
10:50 AM
Bug #8949 (Feedback): DHCPv6 Server Network Booting fails to be set
- Applied in changeset commit:e46ea2c60986c62371966025ab3068466217fefa.
-
08:42 AM
Bug #8949 (Assigned): DHCPv6 Server Network Booting fails to be set
-
11:34 AM Bug #8957: Prefix ID for IPv6 tracked interfaces cannot be set
- Ahh.. Sorry for the false bug. Trying to set this all up and I missed it.
-
- That means you did not set the WAN *DHCPv6 Prefix Delegation size* properly, it may be at the default of /64 when it ...
-
- After a painful, ultimately unsuccessful in-place upgrade to 2.4.4 from 2.4.3-p1, I needed to rebuild my config by ha...
-
- Please read the upgrade guide notes for 2.4.4, specifically the last few points:
https://www.netgate.com/docs/pfse... -
10:59 AM Bug #8960 (Resolved): VGA console won't boot in 2.4.4 upgrade - Bug
- when upgrading to 2.4.4 the VGA console freezes, the system still boots in the background.
you can use webconfigurat... -
10:30 AM
Feature #8947: Cron based ACB option
- Applied in changeset commit:a1aa91dec887ba929be08c993170803396a669b2.
-
10:28 AM
Feature #8947 (Feedback): Cron based ACB option
-
10:27 AM
Feature #8947 (In Progress): Cron based ACB option
-
09:15 AM Bug #8864: SSH Guard Sensitivity/Whitelist on 2.4.4
- Alexander Müller wrote:
> I found following workaround:
>
> * create whitelist file for sshguard following sshgua... -
05:39 AM Bug #8864: SSH Guard Sensitivity/Whitelist on 2.4.4
- I found following workaround:
* create whitelist file for sshguard following sshguards file format (https://www.ss... -
04:35 AM Bug #8864: SSH Guard Sensitivity/Whitelist on 2.4.4
- Well... I'm using the default check_ssh plugin of nagios. This plugin connects to the ssh server and checks before au...
-
08:56 AM Bug #8959 (Resolved): Restoring a <2.4.4 config with legacy gold auto backup package re-adds the menu option under Diagnostics
- I was forced to do a fresh install of 2.4.4 as updating packages before the base OS broke my system. After a fresh in...
-
08:48 AM Feature #8958: Dynamic DNS - CARP Address
- Eg:
Scenario with two firewalls in HA
Subnet x.x.x.224 / 27
CARP address: x.x.x.230 / 27
pfsense 1:
WAN ad... -
- Currently the WAN also has the static address
In any case, I update the Dynamic from the PFSense so if I had to chan... -
- In High Available it is useful when you want to update / modify DNS from a single point without having to move to the...
-
- CARP addresses will always be static. What purpose will this serve?
If it's for Multi-WAN failover, pick the CARP ... -
- In the Dynamic DNS section It's not possible to update an address with the CARP address, IT's only possible to update...
-
- Duplicate of #855
-
07:54 AM Bug #7605: State Killing on Gateway Success
- Just to reference the same issues / feature requests previously opened:
https://redmine.pfsense.org/issues/855
ht... -
- See also: #7605
-
- Duplicated by #8956 -- It was entered after this one, but has better details.
-
02:07 AM Bug #8955 (Duplicate): Limiters after updating to 2.4.4
- in 2.4.3 was created limiters with queues.
After updating to 2.4.4 there are no queues in the limiters.
just add th... -
- See also: #7869
-
- hyper-v 2016
gen1 and gen2 -
06:37 AM pfSense Packages Bug #8945: SquidGuard ACL blacklists
- lahoucine El kamel wrote:
> Hello,
>
> When editing the Squid Guard Proxy Filter I noticed that the settings afte... -
06:00 AM pfSense Packages Bug #8945: SquidGuard ACL blacklists
- lahoucine El kamel wrote:
> Hello,
>
> When editing the Squid Guard Proxy Filter I noticed that the settings afte... -
- Hello,
I have updated Squid and the ACL issue is still there.
When editing the Squid Guard Proxy Filter I noticed... -
- This bug causes the Monitor IP to appear even when a gateway
is unmonitored. The monitor IP from the last gateway in ... -
- traffic shaper after upgrade to 2.4.4 not showing queue under each limiter
i tried to create test limiter and added ... -
02:43 AM Feature #8936: QuickAssist in pfSense
- I can't see any mention of QuickAssist on redmine.
-
- same error (hn0: driver does not support altq) after upgrade to 2.4.4
09/25/2018
-
- submitted in the form data.
-
- Vlan/sub-interface are also affected.
I had to use a physical interface to make igmp proxy to work.
do we h... -
- Not sure this is the same issue as I reported in #8950, because in that bug IGMPProxy is not crashing (it runs untill...
-
- See also: #8950 (has more logs)
-
- I request a Button to copy a DNS entry in the Dynamic DNS (for both, RFC 2136 and Dynamic DNS Clients) Function. When...
-
- If #8948 is not a bug, then this is:
In the overview there is a Hostname shown when you write one into the hostnam... -
- Duplicate of #8935
-
- After upgrade from 2.4.3-p1 to 2.4.4 IGMPProxy (which is upgraded during the 2.4.4 upgrade) seems to be broken. When ...
-
- There isn't a way to set a whitelist currently. But if your monitoring system relies on a probe that is triggering an...
-
- I just want to chime in on this. I just updated my pfsense to 2.4.4 and very soon after I got notifications from my n...
-
Checking "Enable Network Booting" under "Display Advanced" and clicking Save doesn't record ...-
- Should I open a Bug then instead, that in the overview there is a Hostname shown when you write one into the hostname...
-
- With custom types you form the entire query in the Update URL, it doesn't do parameter substitution.
-
- When I add a custom URL for the Dynamic DNS Updater, I am unable to set the Hostname. Instead, I have to set it befor...
-
01:56 PM
Feature #8947 (Resolved): Cron based ACB option
- Provide a way to perform config backups via cron instead of on every change.
-
- How should I test this?
-
01:53 PM
Bug #8933 (Feedback): diagnostics -> backup/restore -> reinstall packages hangs
- Fixed in updater version 0.54
-
06:43 AM
Bug #8933 (In Progress): diagnostics -> backup/restore -> reinstall packages hangs
-
- This should be fixed now. Update the squid package and it should pick up the c-icap update and then work as expected....
-
- Attached is a patch to fix the c-icap FreeBSD port default config to use the correct current syntax.
-
- The upstream port is _not_ fine. See the file I linked. The FreeBSD port is explicitly adding the ListenAddress direc...
-
10:33 AM pfSense Packages Bug #8832: c-icap for Squid 5.1 on 2.4.4 Developer not starting
- Hi Jim,
the guy from the mailing list is me.
The "Listen" directive was removed from 0.4 to 0.5.
Upstream port... -
- This is still happening with 2.4.4 when using ue0 (USB ethernet) as the LAN interface.
ioctl(SIOCGIFMEDIA) failed on... -
-
- Fixed in 2.4.4 as reported by original submitter
-
06:29 AM Bug #8165: Fragmented at source IPv6 packets (UDP + ICMP Ping) are not forwarded / v2.4.2 AMD64
- Update - 25th September 2018 - applied upgrade to pfSense 2.4.4 which is built on FreeBSD v11.2. Confirmed that the ...
-
- When DHCP6 is enabled on an interface and Prefix Delegation is requested, there is nowhere in the GUI to see:
* wh... -
- pfSense-upgrade 0.53 will prevent users from installing / upgrading additional packages when there is a new major PHP...
-
- See also: #8944
-
- Duplicate of #8938
-
04:47 AM pfSense Packages Bug #8944 (Duplicate): attemp of installing pfblocker brakes system on 2.4.3
- Any attempt to install pfblocker on clean 2.4.3-p1 breaks system.
Errors during installation:... -
- If you saw these errors while still on 2.4.3, it's more likely due to an issue such as #8938 and not these errors spe...
-
- Jim Pingle wrote:
> In nearly all cases the messages during the upgrade are harmless. There may be some actual probl... -
- Not enough here for a valid bug report. Your WAN connectivity wouldn't have any correlation to DNS.
Start a post o... -
01:57 AM Bug #8941 (Not a Bug): After upgrading to 2.4.4, my primary gateway lost connectivity when used with Quad9 DNS
- Hi there.
After upgrading to 2.4.4 I suddenly lost all internet access. However, I noticed that my secondary gate... -
- Duplicate of #8849
-
03:36 AM Todo #8942: DHCP config
- *Is it possible to adding own lines to the configuration file of the dhcp server directly in the configuration of the...
-
- In some cases, you may need to add additional partitions to the dhcpd configuration file. Now I do it through editing...
-
- The i-cap issue is covered under #8832
-
- Hello,
When editing the Squid Guard Proxy Filter I noticed that the settings after saving are not loaded.
Example... -
-
- *3) it would be very convenient to divide the computers into groups in this menu in order to switch on the computers ...
-
- 1) In the WOL section I have about 200 lines. In order to add another entry (PC) you need to scroll down the entire l...
09/24/2018
-
- Duplicate of #8832
-
- After the upgrade I had a crash report but it seemed to run. But on a new restart of the pcengines APU2 it would not ...
-
- If it wasn't empty, then it was not this issue. This issue is specifically about an empty crash report.
-
- Just did the upgrade from 2.4.3-1 to 2.4.4 on a PC Engines APU2 and had this issue as well. Not an empty crash report...
-
- Harmless errors from the PHP 5.6 to 7.2 upgrade process. This was mentioned in the release announcement, the release ...
-
09:21 PM Bug #8939 (Not a Bug): Error upgrading Netgate SG-3100 to 2.4.4
- Error file generated after upgrade from 2.4.3-RELEASE-p1 to 2.4.4 on Netgate SG-3100 gateway device. The upgrade appe...
-
09:19 PM
Bug #8938 (Resolved): Installation of a package that depends on php72 on a version of pfSense older than 2.4.4-RELEASE breaks the pfSense install
- Install pfSense 2.4.3 and upgrade to 2.4.3_1, go to Available packages and see that the acme package version 0.3.2_3 ...
-
- If the FreeBSD port is wrong, though, it should be fixed upstream. Then we wouldn't need to make any changes.
Some... -
- Suggested fix: https://github.com/stephenw10/FreeBSD-ports/commit/d21954ad3b4e44e4df6e43e88ac22d589d8cf1b7
-
- This is a problem in the FreeBSD c-icap port. The port itself contains a patch that adds the ListenAddress line.
h... -
- Confirmed the above fix is still functional in 2.4.4r but the default package is still broken.
As a workaround you... -
- This still exists in 2.4.4
-
- I am using a LACP Bond over 4 Interfaces. When I look into the LAGG configuration, I am seeing the ether instead of h...
-
- Please add QuickAssist support to pfSense.
It has been coming soon for a while now and is even listed on SG-5100 pro... -
- I can reproduce this here on a couple different systems. I don't see any sign of @pkg@ running or any log entries sug...
-
- Trying to reinstall all system packages via diagnostic hangs at "Please wait while the update system initializes" in ...
-
- After upgrade from 2.4.3 to 2.4.4 IGMP Proxy will not start anymore.
Stops with following Error:... -
- Need to pull in the patches from r338406
See https://lists.freebsd.org/pipermail/freebsd-net/2018-September/051681... -
- Ah, I forgot that it automatically probes the "latest stable" repo which automatically points you to 2.4.4/RELENG_2_4...
-
- I can confirm that upgrading to 2.4.4 fixes it, as well as downgrading haproxy to 0.59_9 via: pkg add -f https://file...
-
- I agree "it shouldnt be". But i'm seeing my 2.4.3 box offer to install haproxy 0.59_11 .. which at least isn't availa...
-
- It shouldn't be, they are on different branches (RELENG_2_4_3 vs RELENG_2_4_4), the commit may have been manually che...
-
- It seems like 2.4.3 is automatically pulling in the 2.4.4 repository files..?? Even though the 2.4.3 files still exis...
-
- Well it sounds as if https://github.com/pfsense/FreeBSD-ports/pull/555#discussion_r212271252 got into 2.4.3?
-
- No, each release has its own branch. It's possible that an edit intended to only stay on 2.4.4 was picked back to 2.4...
-
- Are you saying that packages are served from one repo only and will more or less immediately break if a new release o...
-
- Upgrade to 2.4.4 and try again.
-
- I cannot upgrade to haproxy 0.59_11 because getarraybyref() no longer exists:...
-
- In nearly all cases the messages during the upgrade are harmless. There may be some actual problems discovered after ...
-
- Renato Botelho wrote:
> There is no easy way to prevent these warnings to show up on console. We are going to alert ... -
- Fix committed in Service Watchdog pkg version 1.8.6, which will be up shortly after 2.4.4-RELEASE
-
08:07 AM Bug #4584: Static Mapped clients on one LAN get a DHCP IP from another LAN even when Deny unknown clients is checked on the other LAN
- Hi,
I would like to bring this bug from the grave.
This still applies in latest versions and it's definitely a bi... -
04:29 AM Bug #8925: IPv6 RA Prefix Doesn't Match Interface Prefix ID
- Hi Jim,
Thanks for taking the time to try and reproduce this issue. I did create a forum issue last week (found he...
Also available in: Atom