Activity
From 04/25/2016 to 05/24/2016
05/24/2016
-
11:51 PM Bug #6396 (Resolved): 504 gateway time out nginx
- The change I made on #6318 resolves subject issue generally. I'll un-mark this as a duplicate for tracking purposes s...
-
02:22 PM Bug #6396 (Duplicate): 504 gateway time out nginx
- this is a duplicate of #6318 then. Yes if it's that easy to replicate, please email me so we can arrange access. thanks!
-
02:15 PM Bug #6396: 504 gateway time out nginx
- Removing the IPsec widget appears to have prevented the eventual failure. This sounds like a different issue. Irrespe...
-
11:29 AM Bug #6396 (Feedback): 504 gateway time out nginx
- there are limitless possible reasons for this to happen, just means php-fpm is hung up doing something. One I've hear...
-
11:36 PM Bug #6401 (Confirmed): OS X and Chrome change js doesn't change field visibility correctly
- This is more widespread than just IPsec P1s. It appears to affect any page that has field changes from Javascript, fo...
-
07:14 PM Bug #6401 (Resolved): OS X and Chrome change js doesn't change field visibility correctly
- Choosing AES then 3DES on IKEv2 Phase 1 leaves key length selector active, resulting in a broken config.
I was abl... - 11:32 PM Revision dd4053d5: Lower default LDAP timeout to 5 seconds. Idea from Sandeep1991 in PR 2971. Ticket #6367
- 11:32 PM Revision 45859aae: Lower default LDAP timeout to 5 seconds. Idea from Sandeep1991 in PR 2971. Ticket #6367
- 11:31 PM Revision e8c09a23: Lower default LDAP timeout to 5 seconds. Idea from Sandeep1991 in PR 2971. Ticket #6367
- 11:17 PM Revision 062a5434: Set request_terminate_timeout to the same as max_execution_time in case something executed externally doesn't respond, to avoid hanging up all of php-fpm eventually. Ticket #6318 among other similar potential issues.
- 11:17 PM Revision 42d2f11a: Set request_terminate_timeout to the same as max_execution_time in case something executed externally doesn't respond, to avoid hanging up all of php-fpm eventually. Ticket #6318 among other similar potential issues.
- 11:12 PM Revision fa01d062: Set request_terminate_timeout to the same as max_execution_time in case something executed externally doesn't respond, to avoid hanging up all of php-fpm eventually. Ticket #6318 among other similar potential issues.
- 11:04 PM Revision 32960b14: Relax Suhosin to allow a 512M memory limit
- 11:03 PM Revision 4584521e: Relax Suhosin to allow a 512M memory limit
- 11:03 PM Revision 785cef80: Merge pull request #2984 from NewEraCracker/php-memlimit
-
10:27 PM Bug #6403 (Resolved): Alias type URL (IP) not available for firewall rules
- fixed, thanks!
-
10:24 PM Bug #6403 (Confirmed): Alias type URL (IP) not available for firewall rules
- that works, merging
-
10:08 PM Bug #6403 (Resolved): Alias type URL (IP) not available for firewall rules
- Aliases of the URL (IP) type are not available for selection in firewall rules.
This should fix it.
https://githu... -
10:09 PM Bug #6318: IPsec dashboard widget causes GUI failure
- Thanks to Alex for getting me into an affected system. It's occasionally getting stuck in pfSense_ipsec_list_sa, with...
-
01:11 PM Bug #6318: IPsec dashboard widget causes GUI failure
- Steve Beaver wrote:
> I have looked through the code again and nothing really stands out.
>
Ditto. Heard of rou... -
01:05 PM Bug #6318: IPsec dashboard widget causes GUI failure
- I have looked through the code again and nothing really stands out.
It would be helpful to know:
* How many tun... -
12:48 PM Bug #6318 (Confirmed): IPsec dashboard widget causes GUI failure
- 09:00 PM Revision e266e6d1: Relax Suhosin to allow a 512M memory limit
-
08:58 PM Revision f2f1101d: Add -H to rsync calls to preserve hardlinks
-
08:58 PM Revision 370a0bc2: Add -H to rsync calls to preserve hardlinks
-
08:58 PM Revision 71768e1f: Add -H to rsync calls to preserve hardlinks
-
08:50 PM Revision 252efda8: Change default final rsync destination when it's a RELEASE
-
08:50 PM Revision 4dc9a6d0: Change default final rsync destination when it's a RELEASE
-
08:49 PM Revision 347ee9e3: Change default final rsync destination when it's a RELEASE
- 08:48 PM Revision b20c7ef1: Set PHP's memory limit to 512M on 64 bit. Ticket #6364
- 08:47 PM Revision 16bcd358: Set PHP's memory limit to 512M on 64 bit. Ticket #6364
- 08:47 PM Revision b6899307: Set PHP's memory limit to 512M on 64 bit. Ticket #6364
-
07:36 PM Bug #6402 (Resolved): Monitoring won't save default configuration of 8 hours with 1 minute resolution, resets resolution to 5 minutes when switching from 1 hour, 1 minute resolution
- I can save the default to 1 hour, 1 minute resolution, but just changing the window to 8 hours auto-selects a 5 minut...
- 07:10 PM Revision 751b9531: Add nrpe to poudriere_bulk
- 07:10 PM Revision 18f38828: Add nrpe to poudriere_bulk
- 07:10 PM Revision 4b643ce8: Add nrpe to poudriere_bulk
-
07:05 PM Bug #6367 (Confirmed): Long delays with LDAP enabled w/local users during boot at "Synchronizing user settings..."
- This came about because I fixed #6352, so it's now doing things it should have been doing but wasn't previously in th...
- 05:44 PM Revision 5ce16fc1: Changed element type from date to text. Date inputs are not yet handled consistently accross different browsers :(
- (cherry picked from commit d78dbc34299652c637c77684b7848191c510f9f0)
- 05:44 PM Revision d78dbc34: Changed element type from date to text. Date inputs are not yet handled consistently accross different browsers :(
-
03:55 PM Bug #6400 (Closed): assign_interfaces.php issues with large numbers of interfaces
- On a firewall running 2.3.1, after creating ~200 vlans, assign_interfaces.php gets _very_ slow while taking 100% cpu....
-
03:50 PM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- It has nothing to do with the number of VLANs or interfaces, if the state table is really large, it runs out of memor...
-
08:50 AM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- currently i can't enable CARP on my cluster and if active node will failed for some reason I'll be without network at...
-
03:46 PM Bug #6399 (Resolved): Alias type not available from config during alias url table creation
- Need to pass alias type to process_alias_urltable() function when creating a new url table alias because it is not ye...
-
01:59 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- That is a different issue. It has to do with the url table download and parsing. It occurs irrespective of this fix...
-
10:21 AM Bug #6395: Comments are not removed from URL Table (Ports) links
- Phillip/Chris/Renato,
I've noticed that I had to save the URL several times before the issue went away. It seemed ... -
06:02 AM Bug #6395 (Feedback): Comments are not removed from URL Table (Ports) links
- Merged. Thanks!
-
02:21 AM Bug #6395: Comments are not removed from URL Table (Ports) links
- Proposed fix.
https://github.com/pfsense/pfsense/pull/2980
Keeps full line comments of downloaded url table file,... -
12:30 AM Bug #6395: Comments are not removed from URL Table (Ports) links
- Well I guess we can both lay claim to ignorance.
Looking over the FreeBSD pfctl man page it seems to me that "addr... -
01:01 PM Bug #6397 (Not a Bug): Status-Monitoring-Quality allows selection of nonexistent GW
- it shows what RRD files are there. You can delete old ones from /var/db/rrd/ if you no longer want that data. I've co...
-
04:25 AM Bug #6397 (Not a Bug): Status-Monitoring-Quality allows selection of nonexistent GW
- When you create a new WAN gateway it is automatically added to the monitoring drop down menu (quality section). If yo...
-
12:12 PM Todo #4706: MPD needs to be upgraded to version 5 even for the various other tunnels
- only two remaining in 2.3.x+ are PPPoE and L2TP servers.
-
11:10 AM Revision 71fe4294: Miscellaneous Textual Correction - System / Advanced / Networking
- Use apostrophe instead of quote.
(cherry picked from commit d3706c81f7f77d21635c335d19e6626a4f7b568b) -
11:09 AM Revision 8d7e9a4c: Merge pull request #2978 from NOYB/Miscellaneous_Textual_Correction_-_System_/_Advanced_/_Networking
-
10:47 AM Revision 608c78e1: URL Table (Ports) File Comments
- Fix for Bug #6395 that keeps full line comments of the downloaded file but strips them for the pf rules load.
(cherr... -
10:47 AM Revision e3dbee3e: Merge pull request #2980 from NOYB/URL_Table_(Ports)_File_Comments
- 10:44 AM Revision 37135283: Fix #6381 ipv6nat_ipaddr
- (cherry picked from commit f489cfdbd4705578ee290b9df5bafe86efddbca8)
- 10:44 AM Revision cf44fe72: Fix #6381 ipv6nat_ipaddr
- (cherry picked from commit f489cfdbd4705578ee290b9df5bafe86efddbca8)
-
10:43 AM Revision eb8704b1: Merge pull request #2976 from phil-davis/patch-2
-
10:04 AM pfSense Packages Bug #5839 (Not a Bug): Squid package loses all settings when upgrading from 2.2.2 to 2.2.6.
-
08:25 AM pfSense Packages Bug #5839: Squid package loses all settings when upgrading from 2.2.2 to 2.2.6.
- As an added note on this, on one of my systems at least, the option defaulted to not save and cleared the config on u...
-
09:27 AM Revision f208e969: redundant check - is_numericint() tests for >= 0
-
09:25 AM Revision 01b5410a: Use global backup count instead of hardcoded value and remove redundant function
-
09:15 AM Revision 16b17c15: fix logic and replace hard coded value by global
- backups should be a numeric int.
text hint for number of backups can now refer to the global value for this platform ... -
09:05 AM Revision 09a28394: set default_config_backup_count based on platform
- At the same time the platform is being detected for PHP/GUI purposes, set the default number of backups. Also handle ...
-
09:01 AM Revision ca55edc3: Give settings section a more helpful/standard title to match other GUI settings tabs
-
06:43 AM Revision e7e1e514: URL Table (Ports) File Comments
- Fix for Bug #6395 that keeps full line comments of the downloaded file but strips them for the pf rules load.
-
05:45 AM Bug #6381 (Feedback): IPv6 over IPv4 Tunneling Option
- Merged, thanks!
-
04:57 AM Bug #6398 (New): If config cannot be loaded due to corruption or bug, it isn't handled gracefully (just stops)
- If the current (and perhaps some recent) backup configs in the cache are unusable, due to failing checking on router ...
-
02:50 AM Feature #6228: Please provide a means for IGMPv3 and MLDv2 support
- I would like to support this request for an updated and more efficient support for multicast.
As a user of the IPTV... -
01:57 AM Bug #6372: OpenVPN client page does not expose proxy port field
- Legend!
Glad it was a simple fix, thanks!
05/23/2016
-
11:37 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- I might show my ignorance here. pf supports the table directive like:
@table <spammers> persist file "/etc/spammers"... -
11:05 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- I think there may be a bigger issue here that just it works this way and not that way.
Essentially it is being handl... -
10:56 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- Yes, the ports "table" is actually implemented as a list contained in a file, which is inserted inline into the rules...
-
09:53 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- Workaround: Use alias type URL (Ports) instead of URL Table (Ports).
A better way of removing the comments than re... -
09:47 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- Phillip Davis wrote:
> Pull request https://github.com/pfsense/pfsense/pull/2979
> Can you try this?
> The old edi... -
09:46 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- This has addressed the comment line removals.
FYI - the "URL Table (IPs)" did not have the comment removal issue.
... -
09:45 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- Appears alias type url table (ports) is not being loaded as a table. It doesn't show up in diag>tables and the rules...
-
08:33 PM Bug #6395: Comments are not removed from URL Table (Ports) links
- Pull request https://github.com/pfsense/pfsense/pull/2979
Can you try this?
The old editing in 2.2.* was editing ou... -
07:37 PM Bug #6395 (Resolved): Comments are not removed from URL Table (Ports) links
- After upgrading from 2.2.6 on the 2.3.1 release, errors appear while loading rules, if the rule contains a "URL Table...
-
10:35 PM Bug #6396 (Resolved): 504 gateway time out nginx
- On 2.3.1 after a bit of uptime, the web interface becomes inaccessible with the following message on a Netgate APU FW...
-
07:17 PM Revision 14e2a004: Define default image type for snapshots later
-
07:17 PM Revision 64799801: Define default image type for snapshots later
-
07:17 PM Revision 3edb445e: Define default image type for snapshots later
-
05:34 PM Revision ddf56629: Introduce a new option to build only core packages and skip images
-
05:34 PM Revision dd423357: BUILDACTION will never be snapshots
-
05:34 PM Revision 3c441c09: Introduce PRODUCT_REVISION variable to be used in core package version
-
05:34 PM Revision 8238d674: Introduce a new option to build only core packages and skip images
-
05:34 PM Revision 4daf5f56: BUILDACTION will never be snapshots
-
05:34 PM Revision 69c97748: Introduce PRODUCT_REVISION variable to be used in core package version
-
05:33 PM Revision 288bd310: Introduce a new option to build only core packages and skip images
-
05:32 PM Revision 7918276b: BUILDACTION will never be snapshots
-
05:32 PM Revision 81897c42: Introduce PRODUCT_REVISION variable to be used in core package version
-
03:06 PM Bug #6382 (Duplicate): assign firewall rule to a limiter kills its traffic
- duplicate of any number of other limiter issues
-
02:44 PM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- James M wrote:
>
> I assume this is still a bug...?
No, see my last comment just above yours. -
12:57 PM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- I am able to create the same issue, running a clean install of v2.3.1
2 WANs setup in gateway groups called "failo... -
12:25 PM Bug #6394 (Resolved): INCORRECT OUTPUT OF TRANSLATION
- Hello Development Team,
I want to report a problem with incorrect output on PfSense 2.3.1 when the language are de... -
10:48 AM Bug #6311: pfSense 2.3 locking up
- Marco Manenti wrote:
> if yes, try to add in /boot/loader.conf legal.intel_iwi.license_ack="1"
Uhm, I think that'... -
10:39 AM Bug #6393 (Resolved): SMART service handling is incomplete/missing
- There is some support in diag_smart.php for running smartd persistently that was activated in 2.3 (it was commented o...
-
09:24 AM pfSense Packages Bug #4304: pfflowd non-functional on 2.2.x versions
- Aside: Softflowd unfortunately doesn't let you specify the source interface/address for sending netflow packets (whic...
-
07:18 AM Bug #6387 (Not a Bug): Comman Name ignored when creating SSL Server Certificate with the Cert Manager
- The CN is applied properly in each case I've tried. For example:
!http://i.imgur.com/MP0rN2j.png!
Results in the ... -
01:04 AM Bug #6387 (Not a Bug): Comman Name ignored when creating SSL Server Certificate with the Cert Manager
- When creating a certificate for a server using the Cert Manager. The Common Name is not applied to the certificate, o...
-
07:07 AM Revision d3706c81: Miscellaneous Textual Correction - System / Advanced / Networking
- Use apostrophe instead of quote.
-
04:52 AM Feature #6392 (Duplicate): Allow folding based on separators in firewall rules
- When you have a lot of rules in the firewall section, you can visually seperate them with seperators (one of the new ...
-
03:27 AM Bug #6391 (Resolved): View Current Portal Page goes to wrong URL
- When uploading custom HTML for the Captive Portal, there are options to view the current uploaded HTML in browser.
... -
01:36 AM Todo #6390 (New): Autoscale from Traffic Graph not correct size (big graphs)
- Hey guys
The autoscale feature from the traffic graph is too big. Attached is a screeshot, where your can see what... -
01:31 AM pfSense Packages Bug #6389 (Resolved): Suricata typo under interface rules tab
- Under "Rule Signature ID (SID) Enable/Disable Overrides" it says below the buttons "When finished, click APPLY to sav...
-
01:29 AM Feature #6388 (Resolved): Status / Dashboard save changes for all users
- Hey guys
The Dashboard save the changes for all users. For example, I have 2 users (one admin and one for a monit...
05/22/2016
-
10:44 PM Bug #6386 (New): Switching Router Advertisements to disabled should broadcast IP Removal messages
- Switching the RA mode from anything to disabled causes the clients to remove the gateway but keep the address for awh...
-
09:05 PM Feature #6385 (Closed): Add Download-only option to System Update
- Can you please investigate allowing system updates to be downloaded separately to the upgrade and reboot of the syste...
-
05:29 PM Bug #6318: IPsec dashboard widget causes GUI failure
- I have no issues since removing the IPsec widget. Now on 2.3.1 and have not seen a lockup
-
03:36 PM Feature #6384 (Duplicate): Allow IPSEC P1 to have 2 peer remote gateway IP addresses to allow VPN failover faster without requiring DDNS
- *The problem*
* IPSEC tunnel failover with DDNS takes over 2.5 minutes.
Today, with DDNDS and WAN gateway groups,... -
01:05 PM Bug #6383 (Not a Bug): Manual Update via WebGUI not working in 2.3.x
- The manual firmware update via the WebGUI is no longer working in PfSense > 2.3.x.
That feature ist very handy to up...
05/21/2016
- 11:33 PM Revision f489cfdb: Fix #6381 ipv6nat_ipaddr
-
08:50 PM pfSense Packages Bug #6380: pfBlockerNG blocks traffic on server reboot
- I assume that you are either on Nano or are using RamDisks? If that is the case, the /var folder gets wiped at reboot...
-
08:58 AM pfSense Packages Bug #6380 (Resolved): pfBlockerNG blocks traffic on server reboot
- I have pfblockerng with DNSBL enable.
I have one DNSBL List called "ConsolidatedDNSBLLists" that is pulling from "... -
08:48 PM pfSense Packages Bug #6368: pfBlockerNG General Settings - Erroneous Text
- Thanks for the report. Will add the missing "." in the next version.
-
07:09 PM Bug #6381: IPv6 over IPv4 Tunneling Option
- I can confirm this does resolve the issue. Thanks
-
06:33 PM Bug #6381: IPv6 over IPv4 Tunneling Option
- This should help https://github.com/pfsense/pfsense/pull/2976
-
12:14 PM Bug #6381: IPv6 over IPv4 Tunneling Option
- I have checked all of my 2.3/2.3.1 installs and they all have the same problem.
-
12:13 PM Bug #6381 (Resolved): IPv6 over IPv4 Tunneling Option
- Since 2.3 I have noticed that the "IPv6 over IPv4 Tunneling" option in Advanced -> Networking does not retain the IP ...
-
05:06 PM pfSense Packages Bug #6274: Missing tabbar in HAProxy for restricted group
- Should be fixed in current pkg0.47 version. Can you confirm?
-
12:50 PM Bug #6382: assign firewall rule to a limiter kills its traffic
- update
after creating a limiter without assigning it to a rule, should i see a limiter on limiter info or should ... -
12:30 PM Bug #6382 (Duplicate): assign firewall rule to a limiter kills its traffic
- after upgrading from 2.3 to 2.3.1 my traffic died and after some reinstalling and trying to make it work again
and ... -
12:01 AM pfSense Packages Feature #6379 (Closed): Please reinstate nameserver package
- Dear All,
Please consider bringing back TinyDNS or BIND packages. For a small place wishing to run own nameservers...
05/20/2016
-
06:17 PM Bug #6375 (Not a Bug): Rename IPSec Profile in VPN menu to iOS IPSec Profile
- it was renamed in 2.3.1 to what we felt was most appropriate
-
04:13 PM Revision 94d882a0: Fix quoting in diag_routes.php, see ticket #6371
-
04:13 PM Revision b1952073: Fix quoting in diag_routes.php, see ticket #6371
-
04:13 PM Revision a3013ca6: Fix quoting in diag_routes.php, see ticket #6371
-
03:34 PM Revision 0e4e4251: Better fix for escaping in ticket #6371
-
03:34 PM Revision 5c4b89a4: Better fix for escaping in ticket #6371
-
03:33 PM Revision 2333d2a4: Better fix for escaping in ticket #6371
-
03:05 PM Revision c805b6e4: Revert "Status / Services - Status Indicator"
- This reverts commit e7161dc3b62b306b57c8d094f93c2ec08c9e0af2.
-
03:04 PM Revision b991582f: Revert "Status / Services - Status Indicator"
- This reverts commit 5260817282c47a208be6daf683db0157544b2d08.
- 02:41 PM Revision c8009eee: Remove calls which rely in uninitizalized vars
- After analyzing implementations in RELENG_2_1 and RELENG_2_2, this code seems to be a left over after code rewrite
A... -
02:41 PM Revision 137fe9b6: Merge pull request #2786 from NewEraCracker/remove-leftovers
-
02:40 PM Revision 54f0c988: Add options to build zabbix3 packages
- (cherry picked from commit 783ca2b22f38fe22a465d2b5451c5e90fd9d1da6)
-
02:39 PM Revision 0518480e: Merge pull request #2898 from dbaio/master
- 02:38 PM Revision 7f1349f7: Add freeDNS v6 support
- FreeDNS IPv6 support confirmed working using same method as v4 with v6 source address. Simple second service with _us...
- 02:38 PM Revision 52665e3d: Add menu item for freeDNS v6
- (cherry picked from commit d102e2d5d3f238fa4f35a1d935366a2e6153804e)
-
02:38 PM Revision 7ee5ec45: Merge pull request #2926 from TechSmurf/patch-1
-
02:37 PM Bug #6371 (Resolved): Remote command execution via diag_smart.php
- I can't break either page with the new code, and I looked throughout the rest of the code base for any other similar ...
-
02:30 PM Revision bc83c9e7: Status / Interfaces - DNS Servers
- The DNS servers are not necessarily ISP provided.
(cherry picked from commit 78869d5e82f149ad5bfb1e1d97d958d0bf1d0d54) -
02:30 PM Revision 3167e8f0: Merge pull request #2970 from NOYB/Status_/_Interfaces_-_DNS_Servers
-
02:29 PM Revision 52608172: Status / Services - Status Indicator
- Use font awesome icons instead of text.
Universal recognition eliminates need of text translation.
(cherry picked fr... -
02:28 PM Revision c5af3a30: Merge pull request #2972 from NOYB/Status_/_Services_-_Status_Indicator
- 02:27 PM Revision adc90ad9: Removed global variables used on the version 2.2
- (cherry picked from commit d4af7f9e4a332278a80ba2a9c56df2064dc579d9)
-
02:27 PM Revision ed285109: Merge pull request #2932 from SilvioGiunge/remover_global_vars
- 02:26 PM Revision a5e2c664: Add the function gettext
- (cherry picked from commit 8d0b16a11c6a2a61fe51507a9b43b3bcad3aab80)
-
02:25 PM Revision bbdbf3d3: Merge pull request #2969 from marianamorim/add_function_gettext
- 02:24 PM Revision 21951782: Fix Captive Portal's MACs icons
- Standardize pass/block icons with the rest of the system
(cherry picked from commit 96abde901f0c4e81d4cac0acd2361267... -
02:24 PM Revision 54b21bab: Merge pull request #2973 from jlduran/pass-block-icons-cp
- 02:23 PM Revision fd45b31a: Fix closing `tbody` tag in Captive Portal's MACs
- (cherry picked from commit 22b50541377ec212d71e0686a0b6a20149b23a7c)
-
02:23 PM Revision 896ae253: Merge pull request #2974 from jlduran/closing-tbody-cp-mac
- 12:43 PM Revision 22b50541: Fix closing `tbody` tag in Captive Portal's MACs
- 12:34 PM Revision 96abde90: Fix Captive Portal's MACs icons
- Standardize pass/block icons with the rest of the system
-
12:24 PM Bug #6376 (Not a Bug): Settings can't be saved
-
12:23 PM Bug #6376: Settings can't be saved
- Same thing.
Admin work well but not LDAP user.
Modify group rights to resolve this issue. So no issue with HA as Ji... -
12:08 PM Bug #6376: Settings can't be saved
- Ok, i solved my problem:
within every new version of priviliges
my reflex is to add them to the user/usergro... -
11:49 AM Bug #6376: Settings can't be saved
- I think i can now clarify what causes the issue in my case:
Setup: vm (esxi-setup) with HA activated.
diff... -
11:36 AM Bug #6376: Settings can't be saved
- Please do not mix and mention other bugs on this ticket, as they are unlikely to be relevant.
The only way I could... -
10:51 AM Bug #6376: Settings can't be saved
- My configuration (hope it help):
Two pfsense on physical hardware (master and backup using HA)
(since version 2.3... -
10:08 AM Bug #6376: Settings can't be saved
- After upgrade pfsense amd64 2.3u1 to 2.3.1. I have the same problem, I using ESXI 5.5U3. For example the rules don't ...
-
09:56 AM Bug #6376: Settings can't be saved
- What is different in the system section between those two configuration files? Can you provide us with both system se...
-
09:52 AM Bug #6376: Settings can't be saved
- I found out, that i can trigger problem if i
import the system section of the active system.
- importing aliases ... -
08:40 AM Bug #6376: Settings can't be saved
- I think the problem is not comming from VM, I am using two physical servers with two different hardware (amd 64 both)...
-
08:22 AM Bug #6376: Settings can't be saved
- HA-Pair, i restored parts of configuration from the active system (2.3. -> 2.3.0_1 -> 2.3.1) which does no longer all...
-
08:19 AM Bug #6376: Settings can't be saved
- Jim Pingle wrote:
> That's not a good test. FreeBSD 10.x is not supported on ESX 5.1, only 5.5U3 or later. See http:... -
08:16 AM Bug #6376: Settings can't be saved
- That's not a good test. FreeBSD 10.x is not supported on ESX 5.1, only 5.5U3 or later. See http://www.vmware.com/reso...
-
08:13 AM Bug #6376: Settings can't be saved
- just did some more tests...
i have 2 environments
a) VMware vSphere 6: Update from pfSense 2.3u1 --> 2.3.1 witho... -
07:54 AM Bug #6376: Settings can't be saved
- Was the old configuration you restored from 2.3.x? You cannot restore parts of an older configuration to a new system...
-
07:51 AM Bug #6376: Settings can't be saved
- Same issue here:
- Basically the apply-settings does not appear.
Started from a clean install and imported parts
... -
07:48 AM Bug #6376: Settings can't be saved
- Thank you Steve and Yasin ls for feedback.
Same thing here: Problem occured after updating from 2.3u1 --> 2.3.1 -
07:44 AM Bug #6376: Settings can't be saved
- Thank you Steve.
Problem occured after updating from 2.3u1 --> 2.3.1
May this is important to now. if i can do so... -
07:04 AM Bug #6376: Settings can't be saved
- Same Problem here.
i just added new ethernet-interfaces in vmware and tried to configure them.
GUI did not save t... -
06:56 AM Bug #6376 (Feedback): Settings can't be saved
- This is not reproducible and there are no other report of this from the field, which of course there would be were it...
-
03:00 AM Bug #6376 (Not a Bug): Settings can't be saved
- When configuration has to be updated using web gui, nothing is saved.
- 12:04 PM Revision 788c3cf5: Fixed #6872 Restored missing proxy port setting
- (cherry picked from commit 6b43692408912de3375b34cc1982ff73f52762a5)
- 12:02 PM Revision 6b436924: Fixed #6872 Restored missing proxy port setting
- 12:02 PM Revision 16fd5b50: Reduce maximum length of string to gettext()
- This limit is set at 4096 on PHP 5.6: http://lxr.php.net/xref/PHP_5_6/ext/gettext/gettext.c#139
Bug report on forum:... -
11:17 AM pfSense Packages Bug #6378 (Resolved): inline background styles in squidguard package
- > When you look at squidguard's Target Category list (assuming it's populated), the text is too faint as compared to ...
-
11:15 AM Revision a2a0e995: Create core repo early and send it to staging area
-
11:15 AM Revision 92a1044d: Create core repo early and send it to staging area
-
09:56 AM Bug #6318: IPsec dashboard widget causes GUI failure
- Brent Kerlin wrote:
> I have seen this issue frequently on clients since 2.3 rolled. I was more concerned with #62... -
08:01 AM Revision e7161dc3: Status / Services - Status Indicator
- Use font awesome icons instead of text.
Universal recognition eliminates need of text translation. -
07:05 AM Bug #6372 (Feedback): OpenVPN client page does not expose proxy port field
- Missing proxy port field restored.
-
05:33 AM Bug #6099: igmpproxy does not recognize upstream interface
- Ulysse FONTAINE wrote:
> Someone have made a commit on the pali/igmpproxy git: https://github.com/pali/igmpproxy/pul... -
05:13 AM Feature #6377 (Resolved): 6rd ipv6 tunnel: MTU settings not editable and not correlated to interface MTU (hardcoded to 1280)
- 6rd tunnel MTU is not user editable and is hardcoded to 1280.
The proper MTU value should be interface MTU minus 20 ... -
03:36 AM Bug #6367: Long delays with LDAP enabled w/local users during boot at "Synchronizing user settings..."
- Though LDAP is causing this delay, I do not think it is due to this as we have the same rc.bootup file for long time....
-
01:59 AM Bug #4326: Limiters on firewall rules where NAT applies drop all traffic
- Hamilton Calixto wrote:
> We have this bug for 1 year. When a solution is presented? I am dismayed by this as it is ...
05/19/2016
-
09:13 PM Revision 12563b0c: Fix up diag_smart e-mail handling, and the backend config code was broken/making false assumption about the config file as well. Fixes #6371
-
09:12 PM Bug #6375: Rename IPSec Profile in VPN menu to iOS IPSec Profile
- Meant to open under 2.3.2
-
09:12 PM Bug #6375 (Not a Bug): Rename IPSec Profile in VPN menu to iOS IPSec Profile
- IPSec Profile in VPN menu should be renamed to *iOS IPSec Profile* . Would make it consistent with the heading under...
-
09:12 PM Revision 1e5239d1: Fix up diag_smart e-mail handling, and the backend config code was broken/making false assumption about the config file as well. Fixes #6371
-
09:12 PM Revision 335f1a89: Fix up diag_smart e-mail handling, and the backend config code was broken/making false assumption about the config file as well. Fixes #6371
- 08:35 PM Revision 3b44f18b: Update openvpn.inc
-
07:50 PM Feature #6374 (Resolved): Provide sample server-side logic to report peer's IP address for use with DDNS
- Pursuant to Issue #6373 -
We can help (our) users of DDNS by providing sample code which organizations could choos... -
07:30 PM Feature #6373 (Resolved): RFC2136 DDNS could be more configurable to improve security
- Our RFC2136-style DDNS depends on external determination of the real IP address (usu. DHCP-assigned by the ISP). Suc...
-
07:24 PM Bug #4326: Limiters on firewall rules where NAT applies drop all traffic
- We have this bug for 1 year. When a solution is presented? I am dismayed by this as it is an extremely important feat...
-
07:01 PM Bug #6372 (Resolved): OpenVPN client page does not expose proxy port field
- Cannot configure OpenVPN client to use a proxy with the GUI, since the proxy port field is not exposed to the user.
... -
05:42 PM Revision f8a36c30: Use correct poudriere ports name on conf
-
04:25 PM Revision 36dd19fb: Use ports branch to define poudriere ports name
-
04:20 PM Bug #6371 (Feedback): Remote command execution via diag_smart.php
- Applied in changeset commit:335f1a8977cf0f711c712864379773e410e996a5.
-
04:10 PM Bug #6371 (Resolved): Remote command execution via diag_smart.php
- When action=config and smartmonemail contains a backticked shell command, it is executed on submit. The parameter doe...
-
03:56 PM Bug #6370 (Confirmed): IPSEC bound to WAN gateway group and Dynamic DNS doesn't to fail back tunnel to WAN on DDNS update
- I first found this happening on 2.3, but waited until post upgrade on 2.3.1 and tested again extensively.
[[https://... -
12:30 PM Revision df9c9cde: Update pfSense.pot
-
12:30 PM Revision b530335e: Update pfSense.pot
-
12:18 PM Bug #6369 (Closed): Config without mouse not possible
- On forms with dynamic fields which will be shown/hidden while changing some drop down values like "Key Exchange versi...
-
11:43 AM Bug #4031: Notifications mail bomb in some gateway failure circumstances
- I was going to post again about this as well -- 2.3.x still doing this quite often and it's really crazy bad sometime...
-
11:31 AM Bug #4031: Notifications mail bomb in some gateway failure circumstances
- I am also experiencing this, with 2.3 and now also with 2.3.1. My absolute worst case was 1,500 emails within couple ...
-
07:13 AM Revision 78869d5e: Status / Interfaces - DNS Servers
- The DNS servers are not necessarily ISP provided.
-
04:36 AM pfSense Packages Bug #6368 (Resolved): pfBlockerNG General Settings - Erroneous Text
- Global Logging Check Box
Firewall Rule logging - Enable Global logging to [ Status: System Logs: FIREWALL Log ]<br... -
03:55 AM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- Memory already configured for 512M but in some place still configured ini_set('memory_limit', '256M'); your fix is f...
-
03:29 AM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- Though this is my first bug fix. I think I found the solution to the bug. Php is crashing due to lack of memory. So f...
-
01:43 AM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- 2.3.1 has same problem
-
03:23 AM pfSense Packages Bug #6305: Quagga problems updating routes / mistakenly showing "kernel"-routes while they are not
- OP hasn't found the time to respond to the post.
a different forum member has confirmed reverting to version above s... -
01:53 AM Bug #6133 (Feedback): Firewall Rull Using !LAN address Error
- I'm guessing this may have been fixed by the more proper validation that config.cache is sane.
05/18/2016
-
11:46 PM Bug #6132: race condition in OpenVPN startup
-
Haven't seen this yet on 2.3.1 but because it is so inconsistent/sporadic, it is too soon to tell really. But so ... -
11:41 PM Bug #6133: Firewall Rull Using !LAN address Error
-
Have not seen this so far on 2.3.1. It's not been long and only a few reboots, but previously it was every boot. ... -
09:18 PM Bug #6367 (Resolved): Long delays with LDAP enabled w/local users during boot at "Synchronizing user settings..."
- This occurs when:
* an LDAP authentication server is selected under User Manager > Settings > Authentication Server
... - 07:40 PM Revision 8d0b16a1: Add the function gettext
-
05:45 PM Bug #6233: Bootloop with Alix after 2.3 upgrade
- Same on version 2.3.1 unfortunately. :(
-
05:31 PM Bug #6366: Status monitoring custom resolution quirkiness
- Never mind. My bad. Other than the resolution terminology which a PR has already be submitted for.
-
02:15 PM Bug #6366 (Not a Bug): Status monitoring custom resolution quirkiness
-
Initial selection of custom time period sets the resolution to "Lowest Possible" (should be "Highest Possible"; su... - 01:29 PM Revision 1168634b: Merge pull request #2968 from NewEraCracker/patch-gettext-maxlen
- 01:28 PM Revision 83c7a421: Initialize output var in firewall_shaper_queues
- To clear any previous use of the var elsewhere in included files.
Forum: https://forum.pfsense.org/index.php?topic=11... - 01:06 PM Revision 293c90fb: Merge pull request #2967 from phil-davis/patch-2
-
11:58 AM Bug #6311: pfSense 2.3 locking up
- Markus Strangl wrote:
> System info:
> SuperMicro Intel Westmere rack boxes, 2 each in HA Cluster with CARP and p... -
11:55 AM Revision 5de5a708: Do not use makefs to create / partition since it fails badly sometimes
-
11:55 AM Revision 21016bb5: Do not use makefs to create / partition since it fails badly sometimes
-
11:49 AM Feature #6365 (Duplicate): Current images do not install on UEFI Machines
- There is already request for that feature [[https://redmine.pfsense.org/issues/4044]].
But I think is better to exte... -
11:34 AM Revision 8f05bbd6: USe boot files from chroot
-
11:34 AM Revision 0ade7f01: USe boot files from chroot
-
10:45 AM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- adding ini_set('memory_limit', '490M'); to the top of status_carp.php file help to display upper part of page but at ...
-
10:23 AM Bug #6364: PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- Crash report begins. Anonymous machine information:
amd64
10.3-RELEASE
FreeBSD 10.3-RELEASE #6 05adf0a(REL... -
10:22 AM Bug #6364 (Resolved): PHP Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 32 bytes) in /usr/local/www/status_carp.php on line 261
- Hello,
i have pretty big carp cluster with:
WAN@1 10.165.128.254 BACKUP
VLAN20@2 10.161.20.210 BACKUP
VLA... -
03:12 AM Bug #6296: Interface dies with IPsec and SMP
- Thanks guys!
For the official boxes (ADI image) there is no 2.3.1 development branch that we could upgrade to corr...
05/17/2016
-
10:58 PM Bug #6363 (Resolved): AutoConfigBackup Restore Actions column missing due to long XMLRPC sync merge strings in the configuration description
- On a backup firewall in an HA cluster, when the backup has been triggered by a merged-in config the "Configuration Ch...
- 08:38 PM Revision 95f46512: Reduce maximum length of string to gettext()
- This limit is set at 4096 on PHP 5.6: http://lxr.php.net/xref/PHP_5_6/ext/gettext/gettext.c#139
Bug report on forum:... -
05:09 PM Bug #6296: Interface dies with IPsec and SMP
- Brent Kerlin wrote:
> Chris Buechler wrote:
> > This has lasted over 3 days now in multiple scenarios that wouldn't... -
11:39 AM Bug #6296: Interface dies with IPsec and SMP
- Chris Buechler wrote:
> This has lasted over 3 days now in multiple scenarios that wouldn't last 4 hours on affected... -
11:29 AM Bug #6318: IPsec dashboard widget causes GUI failure
> Restarting the webconfigurator from the console does not resolve the issue.
> Other than the web not functioning...-
11:26 AM Bug #6318: IPsec dashboard widget causes GUI failure
- Chris Buechler wrote:
> that's 2.3(.0)_1 rather than 2.3.1. It wasn't 2.3->2.3_1 that did it, since that only upgrad... -
10:43 AM Bug #6177: pkg update checking with no Internet access kills web GUI
- this fixed my issue on 2.3, thanks
-
10:28 AM Bug #6149: Proxy settings from system_advanced_misc.php are not respected by pkg
- this patched worked for me, but only after changing the uppercase HTTP_PROXY to lowercase http_proxy
-
09:21 AM Bug #5990: AES-GCM should be an allowed encryption algorithm for IKEv2 in P1
- Testing confirms that it does not work with IKEv1, as expected, but that it does work with IKEv2 following that stron...
-
08:15 AM Bug #6245: Multi-WAN PPPoE not working
- We have 3 setups with multi-wan and the terminating on the same AC. One we are even using ourselves with dual t-busin...
-
07:20 AM Bug #6099: igmpproxy does not recognize upstream interface
- Hi, I have some news.
Someone have made a commit on the pali/igmpproxy git: https://github.com/pali/igmpproxy/pull/2... -
07:12 AM Feature #6103: DNS Resolver Outgoing Interfaces should be able to use Gateway Groups
- Don't think this is viable at this point because of a larger issue that prevents traffic originating from the firewal...
- 01:24 AM Revision 49701df3: Initialize output var in firewall_shaper_queues
- To clear any previous use of the var elsewhere in included files.
Forum: https://forum.pfsense.org/index.php?topic=11... -
12:36 AM Bug #6297: rc.linkup doesn't trigger filter reload
- Hi Chris!
Thanks for your response. I've applied your change to /etc/rc.linkup as requested. So far, I haven't run...
05/16/2016
-
11:35 PM Feature #6362 (New): Allow specifying the client identifier hardware type
- Situation: Mac OS X 10.11 client, wireless. DHCP is specified with 'myhostname' in DHCP Client ID.
In pfSense, DHC... -
08:40 PM Revision 8229d6d8: Add a parameter to skip final rsync
-
08:37 PM Revision 17206e81: Add a parameter to skip final rsync
-
08:37 PM Revision 987ad0f7: Add a parameter to skip final rsync
-
07:12 PM Revision 53f6f76f: Move release branch to 2.3.1
-
07:11 PM Revision 7f5d1a64: Move release branch to 2.3.1
-
05:33 PM Revision eb553778: Bump version to 2.3.2-DEVELOPMENT
-
05:33 PM Revision f3de6f55: Welcome 2.3.1-RELEASE
-
05:15 PM Revision 5c15553d: Disable IPFW functions from pfSense module
-
02:19 PM Bug #6154 (Resolved): Notices are displaying raw html (interpreted by the browser), potential XSS vector
- fixed
-
06:24 AM Bug #6154 (Feedback): Notices are displaying raw html (interpreted by the browser), potential XSS vector
- added sanitation of the output in head.inc as well
-
12:55 PM Revision 96c3b1a7: Do not send files to final place if hostname is empty
-
12:55 PM Revision e362ec5b: Do not send files to final place if hostname is empty
-
12:09 PM Bug #6361 (Not a Bug): Responsive Mobile Menu issue
- This is only applicable when you have the General | webConfigurator | Top Navigation set to Fixed.
Once logged in ... -
11:45 AM Revision e2cc8b18: Revert "Do not enable i386 by default on amd64 host"
- This reverts commit f5a9bb1f2180e6b9fcc9e81006524c2f6813e037.
-
11:41 AM Revision e6adf89f: Miscellaneous Textual Corrections - System / Advanced / Firewall & NAT
- Section panel header title.
(cherry picked from commit 5414794c12fbcd6455a48f81428e0457a9cf0c95) - 11:41 AM Revision d736d861: Merge pull request #2965 from NOYB/Miscellaneous_Textual_Corrections_-_System_/_Advanced_/_Firewall_&_NAT
- 11:40 AM Revision d72312ef: Make limiters info box work same as By Interface
- The info box displayed on Firewall->Shaper, By Interface come down the bottom with and info icon and can be shown/hid...
- 11:39 AM Revision 890bd153: Merge pull request #2964 from phil-davis/patch-3
- 11:39 AM Revision 170fbb18: Customize limiter info message
- The $dn_default_shaper_msg is what is displayed on the Limiters tab. It needs to talk about "limiter" rather than "qu...
- 11:38 AM Revision 973a2d45: Merge pull request #2963 from phil-davis/patch-2
-
11:38 AM Revision 8c95f1fe: Miscellaneous Textual Corrections - System / Advanced / Networking
- (cherry picked from commit 542d14be063e0a90b9182ee3dac9dc3fdb52d04d)
- 11:37 AM Revision 5543a460: Merge pull request #2961 from NOYB/Miscellaneous_Textual_Corrections_-_System_/_Advanced_/_Networking
-
11:37 AM Revision 507d2709: Miscellaneous Textual Corrections - System / User Manager / Settings
- (cherry picked from commit 850211423b3486353b2419b02211213196d8c36e)
- 11:36 AM Revision 8185eabc: Merge pull request #2960 from NOYB/Miscellaneous_Textual_Corrections_-_System_/_User_Manager_/_Settings
- 11:36 AM Revision c6c8cfea: Miscellanous Textual Corrections - Add missing dots, normalize case
- (cherry picked from commit cb6c20a997eeb77b3529e157cd512fabb4ff69f0)
- 11:35 AM Revision 2c6faa05: Merge pull request #2954 from NewEraCracker/textual-corrections
- 11:24 AM Revision 0f1304ee: Sanitize notice output here as well. Ticket #6154
- 11:23 AM Revision e4710ed5: Sanitize notice output here as well. Ticket #6154
-
10:48 AM pfSense Packages Bug #2591: Squid3 can't listen on a CARP VIP
- For those getting bit by the missing CARP interfaces, a viable workaround is to
* Bind Squid to Loopback (127.0.0... -
09:30 AM Bug #6360 (Confirmed): Choosing IKE mode auto on the mobile IPSec config can result in an invalid config.
- it's definitely replicable, ran into it a couple days ago myself but haven't had time to get back to it yet.
-
09:24 AM Bug #6360: Choosing IKE mode auto on the mobile IPSec config can result in an invalid config.
- See: CPY-83269
-
09:22 AM Bug #6360 (Resolved): Choosing IKE mode auto on the mobile IPSec config can result in an invalid config.
- It's possible to end up in situation where neither the IKE mode or Negotiation mode are defined in the config file or...
-
08:44 AM Todo #6358 (Resolved): upgrade OpenVPN to 2.3.11
- there in latest snapshot.
-
05:59 AM Todo #6358 (Feedback): upgrade OpenVPN to 2.3.11
- Done
-
07:19 AM Bug #6109 (Resolved): filterlog crash
- 06:02 AM Revision 31872607: Correct force updates when chosen. Ticket #6359
- 06:01 AM Revision c2b51a45: Correct force updates when chosen. Ticket #6359
-
04:47 AM Bug #6318 (Feedback): IPsec dashboard widget causes GUI failure
- that's 2.3(.0)_1 rather than 2.3.1. It wasn't 2.3->2.3_1 that did it, since that only upgraded ntpd, rather something...
-
04:41 AM Bug #6297 (Confirmed): rc.linkup doesn't trigger filter reload
- rc.linkup doesn't trigger a filter reload. It probably should, though that has the potential for introducing other is...
-
04:07 AM Bug #6333 (Confirmed): Bootup starts/restarts dpinger multiple times
- it ought to do a better job of reloading, rather than the "kill them all and restart" currently.
- 01:34 AM Revision 0876ed6c: Fix script name in error log
- 01:33 AM Revision 92674d7f: Fix script name in error log
- 01:32 AM Revision 223ebd3f: Fix misspellings.
- 01:31 AM Revision 38edc490: Fix misspellings.
-
01:28 AM Bug #6359 (Resolved): RFC 2136 force update doesn't work
- works
-
01:02 AM Bug #6359 (Feedback): RFC 2136 force update doesn't work
- fixed
-
01:01 AM Bug #6359 (Resolved): RFC 2136 force update doesn't work
- The "Save & Force Update" button for RFC 2136 DDNS doesn't actually force updates.
fix coming -
01:06 AM Bug #6357 (Confirmed): Dynamic DNS (RFC2136) updates always considered successful
- Couple different issues here. One I opened up #6359 to cover and fixed that there, so the force update actually force...
05/15/2016
-
11:37 PM Bug #6132: race condition in OpenVPN startup
- if someone can get me access to a box that exhibits this issue, that would help greatly (email cmb at pfsense dot org...
-
12:01 PM Bug #6132: race condition in OpenVPN startup
- Sorry for my english
-
11:53 AM Bug #6132: race condition in OpenVPN startup
- After i upgraded 2.3 -> 2.3.1, i have same issue.
After Pfsense boot, Widget doesn't show OpenVpn connection, but tu... -
11:13 PM Todo #6358 (Resolved): upgrade OpenVPN to 2.3.11
- Need to upgrade OpenVPN to 2.3.11.
https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn23
-
11:08 PM Bug #6223 (Confirmed): IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Those changes helped some instance of this, but definitely doesn't fix the problem for all.
-
10:55 PM Bug #6278 (Resolved): Captive Portal zone name is case sensitive in some places, but not carried through as expected
- works
- 10:54 PM Revision b4f400a4: Update openvpn.inc
-
10:48 PM Revision 5414794c: Miscellaneous Textual Corrections - System / Advanced / Firewall & NAT
- Section panel header title.
- 10:21 PM Revision bc5ab7af: Update openvpn.inc
-
08:39 PM Bug #6296 (Resolved): Interface dies with IPsec and SMP
- This has lasted over 3 days now in multiple scenarios that wouldn't last 4 hours on affected kernels. Multiple outsid...
-
06:19 PM Bug #6357 (Resolved): Dynamic DNS (RFC2136) updates always considered successful
- Architecture: amd64
Installed version: 2.3
I've set the Priority as High, because the functionality isn't working... -
06:19 PM pfSense Packages Bug #6356: Snort - missing protocol in port scan detection
- Thanks. Just to make sure we're not at cross purposes, this is a different issue to the one I posted about here: ht...
-
03:16 PM pfSense Packages Bug #6356: Snort - missing protocol in port scan detection
- There is a PR for this already. Waiting for approval from the Devs...
https://github.com/pfsense/FreeBSD-ports/pul... -
04:01 PM pfSense Packages Bug #6346: Squid Proxy Server Service randomly stops
- I have the same experience and would like to learn how to fix this.
Everything else I have tried in pfsense works O... - 05:25 AM Revision a79dfdaa: Make limiters info box work same as By Interface
- The info box displayed on Firewall->Shaper, By Interface come down the bottom with and info icon and can be shown/hid...
- 05:04 AM Revision aadc1358: Customize limiter info message
- The $dn_default_shaper_msg is what is displayed on the Limiters tab. It needs to talk about "limiter" rather than "qu...
05/14/2016
-
09:38 PM Revision 542d14be: Miscellaneous Textual Corrections - System / Advanced / Networking
-
05:54 AM pfSense Packages Bug #6356 (Resolved): Snort - missing protocol in port scan detection
- On the Snort > Snort Interfaces > WAN Preprocs > Portscan detection tab, the UDP protocol is missing from the Protoco...
05/13/2016
-
08:02 PM Revision 85021142: Miscellaneous Textual Corrections - System / User Manager / Settings
-
04:21 PM Bug #6099: igmpproxy does not recognize upstream interface
- ioctl( Sock, SIOCGIFCONF, &IoCtlReq ) returns a lot more interfaces in FreeBSD 10.3 than my tests under Debian showed...
- 01:22 PM Revision a23600ef: Disable ipcomp regardless of config setting to avoid problem. Ticket #6167
- 01:21 PM Revision c7759e4e: Disable ipcomp regardless of config setting to avoid problem. Ticket #6167
- 12:04 PM Revision a8872fdb: Silence mwexec output. Now that the groupdel actually works, it spams the log when group isn't found. Ticket #6352
- 12:03 PM Revision 535634e5: Silence mwexec output. Now that the groupdel actually works, it spams the log when group isn't found. Ticket #6352
-
12:03 PM Bug #6355 (Resolved): DHCP relay listens for dhcp requests on the upstream interface.
- The dhcp relay will relay dhcp requests that arrive on it's upstream interface, where the dhcp server is, resulting i...
- 09:01 AM Revision 4680f6bf: Make rule_columns_with_alias end params optional
- Stops PHP warnings like reported in forum https://forum.pfsense.org/index.php?topic=111768.0
- 09:01 AM Revision 6d49499d: Merge pull request #2959 from phil-davis/patch-2
-
08:58 AM Bug #6167: IPsec IPComp not working
- We'll leave this as-is for 2.3.1 to avoid introducing any regressions for something that's little-used and off by def...
-
07:51 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Kill Bill wrote:
> Kindly provide a *choice* of filesystem on install - every single Linux distro can do that, why's... -
07:25 AM Bug #6258 (Resolved): Default gateway switching issue with IPv6 and link local gateways
- Thanks for the confirmation. Also confirmed in another setup here, looks good.
-
07:23 AM Bug #6258: Default gateway switching issue with IPv6 and link local gateways
- Confirmed! I did a gitsync and the bug seems to have been squashed! Went through a couple of reboot cycles and firew...
-
12:47 AM Bug #6258 (Feedback): Default gateway switching issue with IPv6 and link local gateways
- fix pushed, works here.
-
12:26 AM Bug #6258 (Confirmed): Default gateway switching issue with IPv6 and link local gateways
- Now I see what's happening. If you have default gateway switching enabled and a link local gateway, this happens.
-
07:16 AM Bug #6345 (Duplicate): boot fails due to "update -f" loop
- been through multiple upgrades to 2.3.1 with no connectivity post-upgrade with no issue. Duplicate of #6180
Rich:... - 07:16 AM Revision 7e752d72: Make rule_columns_with_alias end params optional
- Stops PHP warnings like reported in forum https://forum.pfsense.org/index.php?topic=111768.0
-
07:11 AM Bug #6349 (Resolved): system_advanced_misc.php - Reboot when changing RAM disk option happens even when input validation error occurs and the change isn't saved
- works
-
07:05 AM Bug #6352 (Resolved): pw groupdel error on boot
- that exposed another issue, just pushed a fix for that. All works now.
- 06:30 AM Revision 361b388b: Unbound and dnsmasq can both be enabled so restart both if need be
- 06:30 AM Revision 6d642137: Merge pull request #2958 from k-paulius/patch-16
- 05:44 AM Revision 3ded329e: Fix scope for IPv6 link local gateway IPs. Ticket #6353
- 05:43 AM Revision a4b55d11: Fix scope for IPv6 link local gateway IPs. Ticket #6353
- 05:34 AM Revision ea940381: Handle link local IPv6 gateways and default gateway switching correctly. Ticket #6258
- 05:34 AM Revision 857f3490: Handle link local IPv6 gateways and default gateway switching correctly. Ticket #6258
- 04:24 AM Revision 1a444f88: Unbound and dnsmasq can both be enabled so restart both if need be
-
03:52 AM Revision 35a19ca0: Miscellaneous Textual Corrections - System Advanced
- 03:52 AM Revision e02a2756: Merge pull request #2957 from NOYB/Miscellaneous_Textual_Corrections_-_System_Advanced
-
03:50 AM Revision 507d23cd: Miscellaneous Textual Corrections - Services NTP PPS
- 03:50 AM Revision ce252674: Merge pull request #2956 from NOYB/Miscellaneous_Textual_Corrections_-_Services_NTP_PPS
- 03:40 AM Revision b460c43b: Don't start unbound in track6 config if system is booting. Add dnsmasq here as well. Based on PR 2943. Ticket #6186
- 03:39 AM Revision 6d4fd80b: Don't start unbound in track6 config if system is booting. Add dnsmasq here as well. Based on PR 2943. Ticket #6186
-
03:21 AM Bug #6110: Default gateway switching not always working with PPP
- It could be fixed as a consequence of one of the other fixes in 2.3.1. It didn't seem like it was reliably replicable...
-
03:06 AM Bug #6110: Default gateway switching not always working with PPP
- Yeah it`s for ipv4.
I don`t get it what changed. We can close it? -
02:40 AM Bug #6110: Default gateway switching not always working with PPP
- Greg M wrote:
> Hi!
> Has this been fixed with latest snap?
> I can`t repro it anymore and it works correctly now.... -
02:08 AM Bug #6110: Default gateway switching not always working with PPP
- Hi!
Has this been fixed with latest snap?
I can`t repro it anymore and it works correctly now. - 03:20 AM Revision cd227001: Use -g with groupdel when passing a GID. Ticket #6352
- 03:20 AM Revision 34d58bad: Use -g with groupdel when passing a GID. Ticket #6352
-
03:19 AM Bug #6353 (Resolved): Static route for IPv6 monitor IP with link local gateway not added
- works
-
12:44 AM Bug #6353 (Feedback): Static route for IPv6 monitor IP with link local gateway not added
- fix pushed
-
12:43 AM Bug #6353 (Resolved): Static route for IPv6 monitor IP with link local gateway not added
- The static route for IPv6 monitor IPs with link local gateways isn't added correctly, missing the scope.
-
03:05 AM Bug #6354 (Resolved): dnsmasq and unbound aren't mutually exclusive
- Some parts of the code made the assumption dnsmasq and unbound wouldn't run simultaneously, which isn't necessarily t...
-
02:55 AM Bug #6296: Interface dies with IPsec and SMP
- all still running fine after around 11 hours. That's more than 7 hours longer than any affected kernel has lasted in ...
- 12:35 AM Revision 22f9e40f: Fixed #6349
- (cherry picked from commit c032a89a890a350540df12a9d2e41b9c7d8efda5)
05/12/2016
-
10:35 PM Bug #6137 (Resolved): Old package inc files may cause problems post-upgrade
- all works now
-
05:17 AM Bug #6137: Old package inc files may cause problems post-upgrade
- It passed on all my tests too
-
02:28 AM Bug #6137: Old package inc files may cause problems post-upgrade
- the removal part was fine. The reinstall post-upgrade wasn't working until my last commit. Leaving to verify once tha...
-
10:35 PM Bug #6118 (Resolved): Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- works now
-
02:15 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- Package list now correct, the package reinstall was skipped until my last commit on #6137. This succeeded with that c...
-
10:30 PM Bug #6258: Default gateway switching issue with IPv6 and link local gateways
- Update: I have decided to test 2.3.1 snapshots. I am now on 2.3.1.a.20160512.1401 and there hasn't been any change a...
-
10:21 PM Bug #6352 (Feedback): pw groupdel error on boot
- fix pushed
-
10:19 PM Bug #6352 (Resolved): pw groupdel error on boot
- one of the pw groupdel commands passes a GID without -g, resulting in bootup log like: ...
-
09:54 PM Revision f5a9bb1f: Do not enable i386 by default on amd64 host
- (cherry picked from commit 44b30d595f41d69b0a4db7c032f57ca3e5d338c9)
- 09:53 PM Revision c032a89a: Fixed #6349
-
08:43 PM Bug #6296: Interface dies with IPsec and SMP
- my test setups are past 4 hours run time now, in a scenario where they never exceeded 4 hours before the fix.
One... -
03:49 PM Bug #6296 (Feedback): Interface dies with IPsec and SMP
- latest available snapshot has the fix merged. Test environments running now to verify.
-
08:22 PM Revision 44b30d59: Do not enable i386 by default on amd64 host
-
08:20 PM Revision ac464524: Adjust build code to run with poudriere-devel, what have support to build jail from git and remove workaround used in the past to make it possible to build from svn applying patches
-
07:00 PM Revision b0ef6b97: Miscellaneous Textual Corrections - System Advanced
-
05:02 PM Revision ada85fc2: Use proper IPsec enable test. Fixes #6351
-
05:02 PM Revision da249a00: Use proper IPsec enable test. Fixes #6351
-
05:02 PM Revision 88cce82b: Use proper IPsec enable test. Fixes #6351
-
05:00 PM Bug #6349: system_advanced_misc.php - Reboot when changing RAM disk option happens even when input validation error occurs and the change isn't saved
- Applied in changeset commit:c032a89a890a350540df12a9d2e41b9c7d8efda5.
-
04:57 PM Bug #6349 (Feedback): system_advanced_misc.php - Reboot when changing RAM disk option happens even when input validation error occurs and the change isn't saved
- reboot flag now unset on validation errors
-
11:35 AM Bug #6349 (Resolved): system_advanced_misc.php - Reboot when changing RAM disk option happens even when input validation error occurs and the change isn't saved
- When checking the RAM disk option and clicking Save, the user is prompted to approve a reboot. If the input validatio...
-
04:55 PM Bug #6167: IPsec IPComp not working
- Luiz merged the upstream fix for this in 384ae63efc9d676414c45591c9b6095197919513. With the note: "I changed the IPv6...
-
04:40 PM pfSense Packages Bug #6274: Missing tabbar in HAProxy for restricted group
- Thanks for your report.
Fix send for both packages: https://github.com/pfsense/FreeBSD-ports/pull/127 -
04:21 PM Bug #6099: igmpproxy does not recognize upstream interface
- Seems like, that ifvc.c (igmpproxy) does NOT create the full list of all interfaces in function "buildIfVc()".
May... - 03:41 PM Revision 60ebb473: Add alias display to target host and target port columns
- (cherry picked from commit 474e70a2d178de50060c6e5f1114bb5b6963a6b6)
- 03:41 PM Revision 474e70a2: Add alias display to target host and target port columns
-
03:16 PM Bug #6351 (Resolved): /etc/rc.newipsecdns - Script is still using old IPsec enable flag that no longer exists
- fixed. Verified that was the last remaining instance of that enable flag.
-
12:10 PM Bug #6351 (Feedback): /etc/rc.newipsecdns - Script is still using old IPsec enable flag that no longer exists
- Applied in changeset commit:88cce82b304cd9e0e253f29a9bd3fdc9241260a7.
-
12:02 PM Bug #6351 (Resolved): /etc/rc.newipsecdns - Script is still using old IPsec enable flag that no longer exists
- In /etc/rc.newipsecdns it tests to see if IPsec is enabled by checking:...
-
01:34 PM Bug #6348 (Duplicate): DHCP Server - Delete Additional Pools
- that was already fixed in #6303
-
06:05 AM Bug #6348 (Duplicate): DHCP Server - Delete Additional Pools
- Hi,
After creating an additional pool, trash can to delete it have a wrong url, the interface is missing.
https... -
12:10 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- All this took to cause apparently fatal damage to the "robust" UFS was a *single* power failure. Since the SSD is jus...
-
04:25 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- 1000+ power cycles later in above described case, no issues. This isn't any worse than it's been in any 10.x base ver...
-
11:42 AM pfSense Packages Bug #6350 (Closed): Auto Config Backup - Uncaught Exception
- When attempting to "Show Info" and unable to decrypt the backup, the following warning is generated:...
-
10:52 AM Revision eb29a44a: Add a safebelt to makesure $cpzone is always in lowercase. Ticket #6278
-
10:52 AM Revision 26c7100b: Fix #6278
- $cpzone is always in lowercase, it's used as the array key used in
config.xml. Use it in two cases where the $cp['zon... -
10:51 AM Revision 7949eac7: Add a safebelt to makesure $cpzone is always in lowercase. Ticket #6278
-
10:48 AM Revision 0c388fef: Fix #6278
- $cpzone is always in lowercase, it's used as the array key used in
config.xml. Use it in two cases where the $cp['zon... - 09:31 AM Revision 78012791: Store notices safely to prevent potential XSS when notices are displayed locally or by remote systems where they're shipped. Ticket #6154
- 09:29 AM Revision e392cc2b: Store notices safely to prevent potential XSS when notices are displayed locally or by remote systems where they're shipped. Ticket #6154
-
08:39 AM Bug #5990: AES-GCM should be an allowed encryption algorithm for IKEv2 in P1
- Took the initiative and asked the strongswan mailing list if the AES-GCM was supported in IKEv2. The response is in t...
- 07:14 AM Revision 7b31a030: Fix package_reinstall_all post-upgrade when packages have been removed in pre_upgrade. Ticket #6137
- 07:09 AM Revision 4458ed6b: Fix package_reinstall_all post-upgrade when packages have been removed in pre_upgrade. Ticket #6137
-
06:00 AM Bug #6278 (Feedback): Captive Portal zone name is case sensitive in some places, but not carried through as expected
- Applied in changeset commit:0c388fefae197d481c8c1a85fe1dd802d5ead400.
-
04:34 AM Bug #6154: Notices are displaying raw html (interpreted by the browser), potential XSS vector
- I'd rather store it safely, as there's less chance it'll become a security issue in our code, or outside of it where ...
-
04:13 AM Bug #6347 (Not a Bug): Stop / Restarting Service (/status_services.php)
- Thanks for the feedback
-
02:40 AM Bug #6347: Stop / Restarting Service (/status_services.php)
- Ok, sorry, it was indeed a Cache Problem and I haven't realized the changed behavior
-
01:24 AM Bug #6347 (Feedback): Stop / Restarting Service (/status_services.php)
- also works fine here. That was changed to AJAX updating in 2.3.1 rather than the old reload the page and show "x serv...
-
01:02 AM Bug #6347: Stop / Restarting Service (/status_services.php)
- I just updated to that build also, and those buttons are working for me.
Exactly what does not work?
What are the s... -
12:17 AM Bug #6347 (Not a Bug): Stop / Restarting Service (/status_services.php)
- on WEB Interface: Status - Services
The Action Buttons "Restart", "Stop" and "Start" are not functioning after upda... -
02:43 AM Bug #6177 (Resolved): pkg update checking with no Internet access kills web GUI
- all fixed now
05/11/2016
-
11:52 PM Revision e7f9443c: Miscellaneous Textual Corrections - Services NTP PPS
-
10:50 PM pfSense Packages Bug #6346: Squid Proxy Server Service randomly stops
- this is everything before the restart
May 12 10:48:09 check_reload_status Syncing firewall
May 12 10:48:09 php... -
10:32 PM pfSense Packages Bug #6346: Squid Proxy Server Service randomly stops
- is there anything in the system log (Status>System logs) when it fails to start under Status>Services?
-
10:05 PM pfSense Packages Bug #6346: Squid Proxy Server Service randomly stops
- I dont know how to get better logging for squid but this is everything in the cache file
2016/05/12 10:28:48 kid1|... -
09:53 PM pfSense Packages Bug #6346 (Feedback): Squid Proxy Server Service randomly stops
- best to start a forum thread so others can help pinpoint the specific cause and whether it's actually a bug. Impossib...
-
09:24 PM pfSense Packages Bug #6346 (Rejected): Squid Proxy Server Service randomly stops
- Squid Proxy Server Service stops from time to time and will not start from the services tab, requires a restart of th...
- 10:07 PM Revision 807e3bfc: Tweak upgrade - Remove unused code and document changes better
- This will ensure a smooth upgrade for those running config 15.4 to any next version.
- 10:07 PM Revision 586f5681: Merge pull request #2955 from NewEraCracker/upgrade-code-tweak
- 09:33 PM Revision 6c6e8e34: Prefer index.php over index.html where both exist.
- 09:32 PM Revision 3a643eb8: Prefer index.php over index.html where both exist.
- 08:49 PM Revision 374f8c51: Tweak upgrade - Remove unused code and document changes better
- This will ensure a smooth upgrade for those running config 15.4 to any next version.
-
08:07 PM Bug #6343: Old configs have interfaces with IPv6 link local addresses in the config
- Yep, fair enough. If tgharold in the forum can explain the history of his system so we can understand how FE80 got in...
-
04:21 PM Bug #6343 (Not a Bug): Old configs have interfaces with IPv6 link local addresses in the config
- We've never set anything other than user-defined input there. The described config wouldn't pass input validation in ...
-
06:51 AM Bug #6343 (Not a Bug): Old configs have interfaces with IPv6 link local addresses in the config
- It has been reported that ipaddrv6 tag for an interface has just "FE80" in it in some pre-2.3 configs:
https://forum... - 07:15 PM Revision cb6c20a9: Miscellanous Textual Corrections - Add missing dots, normalize case
-
06:37 PM Revision 9b7cfb3f: Only execute remote search operation on first call of get_pkg_info(), this should fix #6177
-
06:37 PM Revision 70443352: Do not call pkg_update() here since pkg_switch_repo() aldready does it
-
06:36 PM Revision 24d2e482: Only execute remote search operation on first call of get_pkg_info(), this should fix #6177
-
05:02 PM Revision 1a543cea: Do not call pkg_update() here since pkg_switch_repo() aldready does it
-
02:24 PM Bug #6345 (Feedback): boot fails due to "update -f" loop
- that appears to be 2.3.0, as the 2.3.1 URLs would have 2_3 not 2_3_0 in them. Is that definitely 2.3.1? Looks like a ...
-
02:01 PM Bug #6345 (Duplicate): boot fails due to "update -f" loop
- When internet connectivity is unavailable, pfsenese 2.3.1 will not boot due to 'update -f' failing and retrying indef...
-
01:50 PM Bug #6177 (Feedback): pkg update checking with no Internet access kills web GUI
- Applied in changeset commit:24d2e48271a6b48227268de9216edd66572ed77c.
-
12:51 PM Bug #6344 (Feedback): Firewall rules being deleted when separators are added
- There were some at least somewhat relevant changes to that in 2.3.1, particularly with having a separator at the bott...
-
11:00 AM Bug #6344 (Resolved): Firewall rules being deleted when separators are added
- I'm seeing an issue where separators are causing rules to disappear. Doing a config restore removes the separators an...
- 12:34 PM Revision 48d321ca: Miscellanous Textual Corrections - Add missing dots to phrases
- (cherry picked from commit e4c7d45fc7a294817325354e13f4d5bc4987739e)
- 12:34 PM Revision 4296459a: Merge pull request #2953 from NewEraCracker/textual-corrections
- 12:33 PM Revision 289233b9: Merge branch 'master' of git.pfmechanics.com:pfsense/pfsense
-
12:32 PM Revision 771acc31: Miscellaneous Textual Corrections - Services / Dynamic DNS
- (cherry picked from commit 1c4e2ed053a04f7768a21129171a27e6804dbb0c)
- 12:31 PM Revision 61a0217e: Merge pull request #2950 from NOYB/Miscellaneous_Textual_Corrections_-_Services_Dynamic_DNS
-
11:43 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Chris Buechler wrote:
> doktornotor: welcome back. What's your wireless config like on there? What type of card and ... -
07:08 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Chris Buechler wrote:
> He's referring to the web installer, which was removed in one of the 2.2.x versions.
Ah, ... -
04:28 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- I struck out on attempting with various wireless configs in a few dozen power cycles. Also tried writing out a slew o...
- 08:43 AM Revision e4c7d45f: Miscellanous Textual Corrections - Add missing dots to phrases
-
07:28 AM Bug #6154: Notices are displaying raw html (interpreted by the browser), potential XSS vector
- Changing ACB directly was the quickest way to get a fix for everyone without updating pfSense itself, but looking thr...
-
02:50 AM Bug #6154: Notices are displaying raw html (interpreted by the browser), potential XSS vector
- ACB is good now. But head.inc probably should sanitize $id and $notice unconditionally. Any reason we couldn't always...
- 06:56 AM Revision 3f398f0d: Hide CIDR for alias types that do not use it
- Suggested/discussed in forum
https://forum.pfsense.org/index.php?topic=111593.0 - 06:56 AM Revision f212adc8: hideMask only modify input-group on first parent
- Otherwise when unhiding (e.g. for Network type alias), input-group gets
added to every div up the DM hierarchy and th... - 06:52 AM Revision 4d6914a1: Merge pull request #2952 from phil-davis/hidemask
-
06:00 AM Bug #5993: dhcp6c not started until an RA received
- Chris Buechler wrote:
> David Wood wrote:
> > The precautionary principle suggests that changing the current behavi... - 05:52 AM Revision 60ec2d7a: Rename OSPF and System Patches packages in pre_upgrade_command. Ticket #6118
- 05:51 AM Revision ab2060d9: Rename OSPF and System Patches packages in pre_upgrade_command. Ticket #6118
- 05:30 AM Revision 6086293b: Revert "Add config upgrade code to update package names. Ticket #6118"
- This reverts commit 297ace668e4a4ffbf1fb1581e7c765e2ed158e29.
- 05:29 AM Revision 538a3c04: Revert "Add config upgrade code to update package names. Ticket #6118"
- This reverts commit 291fad43870bdb39ef0ab32125b022e268a29cf7.
- 04:19 AM Revision 685a06f2: Hide CIDR for alias types that do not use it
- Suggested/discussed in forum
https://forum.pfsense.org/index.php?topic=111593.0 - 04:14 AM Revision 01142f51: hideMask only modify input-group on first parent
- Otherwise when unhiding (e.g. for Network type alias), input-group gets
added to every div up the DM hierarchy and th... - 03:55 AM Revision 381b8f1c: Check for is_array here to avoid possible issues if the config.cache is invalid. Adapted from PR 2925
- 03:53 AM Revision adb6925e: Check for is_array here to avoid possible issues if the config.cache is invalid. Adapted from PR 2925
- 03:44 AM Revision 5925b419: Spaces->tabs
- (cherry picked from commit e1caefc74fba6cbbb680288c1f8d930e4f0ad474)
- 03:42 AM Revision e1caefc7: Spaces->tabs
-
03:30 AM Bug #6149 (Resolved): Proxy settings from system_advanced_misc.php are not respected by pkg
- this works both in GUI and CLI.
-
03:21 AM Bug #6342 (Duplicate): Pf-Sense use lots of CPU time and all connections is down
- that's #6296
-
02:57 AM Bug #6342 (Duplicate): Pf-Sense use lots of CPU time and all connections is down
- Hi,
I have many Pf-sense firewalls in VM-ware esx-i 5.5 enviroment. I Upgrade all Pf-senses to 2.3 version.
I ha... -
03:19 AM Bug #6186: race conditions in service startup
- What I committed takes things back to 2.2.x and earlier behavior, plus retaining the fix for #5952. That's confirmed ...
- 03:16 AM Revision 25a96ffb: Added hideMask() function
-
02:06 AM Bug #6120 (Resolved): Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- all works now
-
12:57 AM Bug #6327 (Resolved): Alignment defect in forms
- looks good, thanks!
-
12:54 AM Bug #6307 (Resolved): Console error from filter.inc if $nat_if_list is not an array on line 1934
- fixed
-
12:53 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- that works. leaving to test once it hits a snapshot.
-
12:40 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- the config upgrade code worked, or would have if it were actually in the config at that point. The pre_upgrade_comman...
05/10/2016
-
10:12 PM Revision 1c4e2ed0: Miscellaneous Textual Corrections - Services / Dynamic DNS
-
09:00 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- doktornotor: welcome back. What's your wireless config like on there? What type of card and config. Not that it shoul...
-
07:44 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Kill Bill wrote:
> The only stable thing for me was ZFS - which, sadly, ain't doable any more with 2.3
Why wouldn... -
04:11 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Yeah, I understand it's not recommended or supported or whatever, however the stable solution (which was in place whe...
-
03:59 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Kill Bill wrote:
> No, this was not any old upgraded install. Happened on a fresh 2.3 full install with SU+J being... -
03:16 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Renato Botelho wrote:
> So you have SUJ off, but you have Soft Updates enabled, right? Did you disabled SUJ for any ... -
03:09 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Renato Botelho wrote:
> So you have SUJ off, but you have Soft Updates enabled, right? Did you disabled SUJ for any ... -
02:46 PM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- So you have SUJ off, but you have Soft Updates enabled, right? Did you disabled SUJ for any reason or is it an old in...
-
11:24 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Kill Bill wrote:
> it hangs reliably on every second reboot, no matter the troubleshooting steps above. It's repeata... -
10:09 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Jim Pingle wrote:
> He's alive! :-)
Yeah, indeed... :-)
> This sounds like a different failure mode with poten... -
07:10 AM Bug #6340: fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- He's alive! :-)
This sounds like a different failure mode with potentially the same root cause as #5592, which app... -
07:06 AM Bug #6340 (Confirmed): fsck hangs boot in background, fails to produce any action, resulting in broken firewall
-
03:56 AM Bug #6340 (Resolved): fsck hangs boot in background, fails to produce any action, resulting in broken firewall
- Hi, guys! (Yeah, still alive, eventually might get back to fixing something in pfSense. :-P)
Meanwhile - this fsck... -
08:57 PM Bug #6341 (Resolved): Wrong tab highlighted when editing a Mobile P1
- works
-
02:40 PM Bug #6341 (Feedback): Wrong tab highlighted when editing a Mobile P1
- Applied in changeset commit:16203db3766d694c22a49ff25353e1109bf64c6d.
-
02:27 PM Bug #6341 (Resolved): Wrong tab highlighted when editing a Mobile P1
- When editing a Mobile P1, the "Mobile Clients" tab is highlighted, though it's not really a function of that tab.
... -
07:28 PM Revision 9815f806: Fix tab highlighting when editing mobile IPsec P1. Fixes #6341
-
07:27 PM Revision 16203db3: Fix tab highlighting when editing mobile IPsec P1. Fixes #6341
-
07:04 PM Bug #6177: pkg update checking with no Internet access kills web GUI
- Steve Beaver wrote:
> Which widgets are enabled on you dashboard?
- System Information
- Interfaces
- Firewall ... -
03:56 PM Bug #6177: pkg update checking with no Internet access kills web GUI
- Which widgets are enabled on you dashboard?
-
03:48 PM Bug #6177: pkg update checking with no Internet access kills web GUI
- Disabling the 'automatic dashboard auto-update check' at /system_update_settings.php seems to mitigate the issue for ...
-
05:07 PM Bug #6338 (Not a Bug): virtual ip
- something is wrong in your network, probably an IP conflict from the sounds of that.
- 01:10 PM Revision d515da75: Adding missing spaces between punctuation
- (cherry picked from commit 0e63fe1f372584a03a6c84aeb6268fde8de75b3a)
- 01:10 PM Revision 0161bbb4: Merge pull request #2949 from NewEraCracker/textual-corrections
-
01:09 PM Revision 031cf0b4: Miscellaneous Textual Corrections - Services Load Balancer
- (cherry picked from commit f3817766671915583074465aa725152c7a293568)
- 01:09 PM Revision da1fdf78: Merge pull request #2948 from NOYB/Miscellaneous_Textual_Corrections_-_Services_Load_Balancer
- 09:39 AM Revision 0e63fe1f: Adding missing spaces between punctuation
-
02:52 AM Bug #6099: igmpproxy does not recognize upstream interface
- For testing I copied the igmpproxy from version 2.2.6 to latest pfsense Version. Then I had to Link /tmp/igmpproxy.co...
-
12:18 AM pfSense Packages Bug #6339 (Resolved): OpenVPN Client Export package option for "Use Microsoft Certificate Storage" does not specify which certificate to use
- Just spent a while tracking this down, please disregard if it's a PEBKAC issue. :)
I tried the option in the clie...
05/09/2016
-
11:28 PM Revision f3817766: Miscellaneous Textual Corrections - Services Load Balancer
-
11:20 PM Bug #6338 (Not a Bug): virtual ip
- hi
i had a pfsense by wan ip address:172.16.1.10 and GW:172.16.1.11
i add 6 more IPs(x.x.155.129/32,x.x.155.130/32,... -
10:16 PM Revision 533f5895: theme Compact-RED, added a few more tweaks to look a bit more aligned.
- (cherry picked from commit ec18e589f123595c34cf8e1a84313394bb909250)
- 10:15 PM Revision 974dee46: Merge pull request #2947 from PiBa-NL/css_compact_red
-
10:08 PM Revision ec18e589: theme Compact-RED, added a few more tweaks to look a bit more aligned.
- 09:13 PM Revision 96122f60: just exit for v6, gateways setup above.
- 09:13 PM Revision 07b45576: just exit for v6, gateways setup above.
- 09:11 PM Revision 0eb97c7c: fix booting check
- 09:10 PM Revision b8735779: fix booting check
- 06:45 PM Revision ed80365b: Add Compact-RED theme and update system.php to sort available themes by pfSense, then BETA, then user supplied themes.
- (cherry picked from commit 6a5c6661960e1cd39e3caf66a3caaeb2678d27b1)
- 06:44 PM Revision 6a5c6661: Add Compact-RED theme and update system.php to sort available themes by pfSense, then BETA, then user supplied themes.
-
05:45 PM Bug #6285: Stability issue with w/ OpenVPN Server on pfSense 2.3
- Just to wrap this up. I had a chance over the weekend to install 2.3 from the iso and restore my configuration. Ope...
-
05:20 PM Revision 1ad587b5: Revert "Fix #6120"
- This reverts commit 4cbe0b132f0d60b71a20052fae1155210a1f5a16.
-
05:20 PM Revision 70f41755: Revert "Require system.inc to fix /etc/rc.console_setup. Ticket #6120"
- This reverts commit 32f0ee884632aba5ab38485a7c25c190bb5bccce.
-
05:17 PM Revision 32f0ee88: Require system.inc to fix /etc/rc.console_setup. Ticket #6120
-
04:52 PM pfSense Packages Bug #6116: pfBlockerNG doesn't automatically update after firmware upgrade, meaning that unbound doesn't start and users don't have internet connection
- Devs:
Do you have any concerns with restoring the DNSBL database in the **/var/unbound** folder on **reboot**... -
01:29 PM Revision 65aac79d: A simple fix for #6120
- - Retire system_console_configure()
- Replace above call on rc.bootup by setup_serial_port() -
01:29 PM Revision 941ddb52: A simple fix for #6120
- - Retire system_console_configure()
- Replace above call on rc.bootup by setup_serial_port() -
01:29 PM Revision e7c23d82: Revert "Fix #6120"
- This reverts commit 1831d3486317a6ac8a8bfd034bb133f9b0dc55e7.
-
01:23 PM Revision bce2ce60: Miscellaneous Textual Corrections - Services DNS Resolver
- (cherry picked from commit 0cb4d4a63585f500329616be6ee2bbb2274975c6)
- 01:23 PM Revision 54f03f07: Merge pull request #2946 from NOYB/Miscellaneous_Textual_Corrections_-_Services_DNS_Resolver
-
01:22 PM Revision cea54822: Miscellaneous Textual Corrections - Services DNS Forwarder
- (cherry picked from commit 3d7aaa1a3fac45271bfa50190496be6d70d7f296)
- 01:22 PM Revision 7fc5435b: Merge pull request #2945 from NOYB/Miscellaneous_Textual_Corrections_-_Services_DNS_Forwarder
-
01:06 PM Revision 1831d348: Fix #6120
- - Do not include /etc/ttys on base package, it's not supposed to be
replaced during upgrade
- Create a script /etc/rc... -
12:51 PM Revision 4cbe0b13: Fix #6120
- - Do not include /etc/ttys on base package, it's not supposed to be
replaced during upgrade
- Create a script /etc/rc... -
12:45 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Thanks, I can confirm working...
-
12:21 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Greg M wrote:
> See attached screen..
> This happens on latest snap, maybe related?
Yes, I reverted a commit on ... -
12:03 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- See attached screen..
This happens on latest snap, maybe related? -
08:10 AM Bug #6120 (Feedback): Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Applied in changeset commit:4cbe0b132f0d60b71a20052fae1155210a1f5a16.
-
11:23 AM Bug #6337 (Closed): Pfsense 2.3 on MS hyperV
- Pfsense 2.3 looses network connectivity on Hyper-V.
After upgrade from 2.2.6 to 2.3 the network connectivity got los... -
08:54 AM Feature #6336 (Duplicate): link to release notes on update page
- On the system update page where it lists the current version, new version, and the "confirm" button, there should be ...
-
01:19 AM pfSense Packages Bug #6305: Quagga problems updating routes / mistakenly showing "kernel"-routes while they are not
- for me, downgrading to older version seems to solve all issues. no confirmation if this is the case for the OP of the...
05/08/2016
-
07:57 PM Revision 0cb4d4a6: Miscellaneous Textual Corrections - Services DNS Resolver
-
07:56 PM Revision 3d7aaa1a: Miscellaneous Textual Corrections - Services DNS Forwarder
-
01:21 PM pfSense Packages Todo #6190: Convert and add NUT package to pfsense 2.3
- Looks like feature implemented and it works for me at least.
- 08:14 AM Revision 96ca32a2: Update L7 config upgrade code removal. Only file notice if it was actually in use, otherwise it just confuses people.
- 08:14 AM Revision ad9b77f9: Update L7 config upgrade code removal. Only file notice if it was actually in use, otherwise it just confuses people.
- 08:11 AM Revision 297ace66: Add config upgrade code to update package names. Ticket #6118
- 08:10 AM Revision 291fad43: Add config upgrade code to update package names. Ticket #6118
-
07:32 AM Todo #6332: Upgrade encryption options to cover current range of recommendations
- Also noting
* captiveportal.inc uses MD5 to generate randomness for the session id (and probably shouldn't?)
* aut... -
04:37 AM Bug #6335: Status > IPsec shows both connected and disconnected with Split Connections enabled
- Appears to require a complete stop and restart of strongswan after enabling or disabling split connections to toggle ...
-
04:29 AM Bug #6335 (Resolved): Status > IPsec shows both connected and disconnected with Split Connections enabled
- If an IPsec connection has split connections enabled, it shows both connected and disconnected in Status > IPsec. Dis...
-
04:19 AM Revision 62a9863c: Add missing recommended digest
-
04:18 AM Revision 04c7b6bb: Add missing recommended key lengths/digest to ca manager
-
04:17 AM Revision 5065aa44: Add missing recommended key lengths/digest to certmanager
-
04:11 AM Revision d5018c6a: Add missing recommended key lengths to user manager
- Add key lengths to user manager options
-
04:08 AM Revision b56769c3: Self correcting - poor english
-
04:04 AM Revision d4fdce4e: Accuracy
- Large keys are not "slower to use" in many cases, since they are only used to validate or set up a session. An ongoin...
-
03:54 AM Revision 7c684f3b: missed a comment I added and shouldn't have - removed
-
03:52 AM Revision 49810252: Update OpenVPN Wizard to include missing key sizes
- ...and add some useful info to guide the user.
-
03:41 AM Revision 0693c967: Add missing recommended key lengths to OpenVPN options
- Add key lengths to the OpenVPN options, for asymmetric keys of size 3072 (for current use), 7680, 15360 (for long ter...
-
03:12 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- pushed config upgrade code to rename those packages in the config. It looks like OSPF and System Patches are the only...
-
01:43 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- This is only an issue upgrading from 2.1.x (and likely earlier but haven't tried).
-
01:40 AM Bug #6334 (Confirmed): No data periods in monitoring are represented as 0 (zero). Skewing averages.
- It needs a way to differentiate 0 and n/a. Not sure how difficult that might be offhand.
-
12:45 AM Bug #6334 (Resolved): No data periods in monitoring are represented as 0 (zero). Skewing averages.
- No data periods in monitoring are represented as 0 (zero). Skewing averages.
- 01:00 AM Revision d239edd1: Setup gateway monitors and exit in rc.newwanip(v6) if system is booting. Ticket #6186
- 12:59 AM Revision c4b5c8be: Setup gateway monitors and exit in rc.newwanip(v6) if system is booting. Ticket #6186
- 12:29 AM Revision adff3136: Log if rc.newwanip(v6) is called with empty interface.
- 12:28 AM Revision ef945b86: Log if rc.newwanip(v6) is called with empty interface.
-
12:22 AM Bug #6333 (Confirmed): Bootup starts/restarts dpinger multiple times
-
The setup_gateways_monitor function is called multiple times during boot up by rc.boot, rc.newwanip, and rc.newwan... -
12:13 AM Bug #6179 (Resolved): Not obtaining update status on nanobsd when read-only mounted
- The issue I turned this into is now fixed by fixing #6184.
M S: if you're still having issues permanently rw moun...
05/07/2016
-
11:54 PM Bug #6159 (Feedback): Package Manager not up-to-date
- this isn't something Renato or I have been able to replicate. It does a pkg update before showing the GUI, and that w...
-
10:24 PM Todo #6332 (New): Upgrade encryption options to cover current range of recommendations
- Several packages, as well as base, have GUI where the user can specify a cipher, digest, or other encryption-related ...
- 10:10 PM Revision 55a9ca07: status_queues.php, default packet_s to 0 if it falls through to that point. Ticket #6329
- 10:09 PM Revision 6f069e92: status_queues.php, default packet_s to 0 if it falls through to that point. Ticket #6329
-
08:24 PM Bug #3450: DHCPv6 Lease Status shows no Leases
- Nonsense. Sorry to bother. Just had anactual lease com in. And it works.
-
08:11 PM Bug #3450: DHCPv6 Lease Status shows no Leases
- Hi,
See attached screen dump.
A lease file with a lease but nothing showing on the leases page.
Being an absolut... - 07:46 PM Revision f2c719c9: Experimentally fixed #6327
- (cherry picked from commit 54fc9503ff550d04d1253c41c1fd49da1b64c07e)
- 07:45 PM Revision 54fc9503: Experimentally fixed #6327
-
07:08 PM Revision 885af75c: Miscellaneous Textual Correction - Firewall / Shaper
- (cherry picked from commit c3ebf3470402080bbddb709325611e7120eb3c0f)
- 07:08 PM Revision cb4300cb: Merge pull request #2941 from NOYB/Miscellaneous_Textual_Correction_-_Firewall_/_Shaper
-
07:07 PM Revision 0925f82d: Miscellaneous Textual Correction - Firewall / Rules
- (cherry picked from commit 1fd8a5520602803108ef8bbb56b8ffd6493f2a00)
- 07:06 PM Revision 59bc4784: Merge pull request #2939 from NOYB/Miscellaneous_Textual_Correction_-_Firewall_/_Rules
-
06:42 PM Revision c3ebf347: Miscellaneous Textual Correction - Firewall / Shaper
- 05:49 PM Revision 0a52ea65: Fixed #6331
- (cherry picked from commit 7e653b50c4a25b045121c026cd09ac4e567c0c42)
- 05:48 PM Revision 7e653b50: Fixed #6331
- 05:43 PM Revision 413a52a0: Workaound fixes #6320
- (cherry picked from commit d1c57eb8e1699f36a3ccda53cef2e28b10eeca92)
- 05:42 PM Revision d1c57eb8: Workaound fixes #6320
-
05:41 PM Bug #6330 (Not a Bug): Freeze with
- Another crash, another completely diff bt. ...
-
02:23 AM Bug #6330: Freeze with
- the two backtraces: ...
-
01:32 AM Bug #6330 (Not a Bug): Freeze with
- I had two kernel panics in the past 20 hours after upgrading to a newer 2.3.1 version (2.3.1.a.20160506.0040). Stack ...
-
05:28 PM Bug #6331 (Resolved): Unable to set speed and duplex on interface
- fixed
-
04:56 PM Bug #6331: Unable to set speed and duplex on interface
- works for me
-
01:00 PM Bug #6331: Unable to set speed and duplex on interface
- Applied in changeset commit:7e653b50c4a25b045121c026cd09ac4e567c0c42.
-
12:49 PM Bug #6331 (Feedback): Unable to set speed and duplex on interface
- Fixed. Thanks for the report.
-
12:16 PM Bug #6331 (Resolved): Unable to set speed and duplex on interface
- I'm unable to set speed and duplex on interface. When i set it, the "apply changes" appears on top of the screen but ...
-
05:26 PM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Michael OBrien wrote:
>
> Still having this issue (running OpenBGPd + IPSec - transport phase 2 with GRE tunnels) ... -
11:25 AM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Chris Buechler wrote:
> I set it as committed on "shthead"'s system and it seems to be fine.
Still having this is... -
05:18 PM Bug #6099: igmpproxy does not recognize upstream interface
- Kay Ringmann wrote:
>
> What was changed in the new Release? I dont think i'm the only one with this Problem.
U... -
04:16 PM Bug #6099: igmpproxy does not recognize upstream interface
- I Did a Plain install, but the problem persists.
The behavior of listed Interfaces changes unpredictable if i Chan... -
07:16 AM Bug #6099: igmpproxy does not recognize upstream interface
- Kay Ringmann wrote:
> i read this. So I played a little around. It seems that it's depending from upstream interface... -
05:11 PM Bug #6300 (Duplicate): status_queues.php can cause php errors when queues are on disconnected interfaces
- didn't notice this, I duplicated it in #6329. it was fixed there
-
05:06 PM Bug #6327: Alignment defect in forms
- Thanks for your fix. It was effective but I realized that it could be applied in a way that fixed alignment issues in...
-
04:19 PM Bug #6327: Alignment defect in forms
- Your change break my PR https://github.com/pfsense/pfsense/pull/2940 :) which can be replaced by your fix
-
04:17 PM Bug #6327: Alignment defect in forms
- it remains the checkbox that are not aligned for me :)
-
04:16 PM Bug #6327: Alignment defect in forms
- It may, but lets see how this turns out while I research other possibilities.
-
03:52 PM Bug #6327: Alignment defect in forms
- There's more, but I'm afraid of change ".col-sm-10" breaks the overall style, especially in the additional packages
-
02:50 PM Bug #6327: Alignment defect in forms
- Applied in changeset commit:54fc9503ff550d04d1253c41c1fd49da1b64c07e.
-
02:49 PM Bug #6327 (Feedback): Alignment defect in forms
- I have added some top padding to revise the vertical alignment but marked it as "experimental". If no anomalies arise...
-
08:34 AM Bug #6327: Alignment defect in forms
- This particularly affects instances of the Form_Statictext() class but can be seen elsewhere as shown here. It affect...
-
08:09 AM Bug #6327: Alignment defect in forms
- Hi,
Same problem on 2.3_1 - Tested on Safari
Thx -
04:57 PM Bug #5999: IPv6 IP Alias prevents Track Interface from working with DHCPv6 and RA
- Another issue that seems to be related to this is that firewall rules using "LAN net" and similar are not obeyed if y...
-
04:54 PM Bug #6320 (Resolved): pkg_mgr_install.php?id=firmware displays incorrect firmware version
-
04:53 PM Bug #6320: pkg_mgr_install.php?id=firmware displays incorrect firmware version
- Works
!Sélection_017.png! -
12:50 PM Bug #6320: pkg_mgr_install.php?id=firmware displays incorrect firmware version
- Work-around put in place pending revision of this section
-
12:50 PM Bug #6320 (Feedback): pkg_mgr_install.php?id=firmware displays incorrect firmware version
- Applied in changeset commit:d1c57eb8e1699f36a3ccda53cef2e28b10eeca92.
-
02:23 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- @Renato, for your reference yesterday evening i was testing and discussing with Chris with a fresh installation of pf...
- 10:11 AM Revision af06931c: Add nut package to poudriere
- 10:11 AM Revision aec067d1: Add nut package to poudriere
- 10:11 AM Revision 5cfd5492: Add nut package to poudriere
-
05:27 AM Bug #6136 (Resolved): System Update settings page branch selection text is bogus on systems upgraded 2.3-RC to 2.3-RELEASE
- works
fixed in -src repo in:
4a578420216361b8acfb7296dd0b68c805e5121b
3938f6f800c9999a8a88141284b1841b71cd8af0 -
05:24 AM Bug #6184 (Resolved): 2.3 NanoBSD issues with getting stuck read-only mounted
- all good.
-
05:22 AM Bug #6322 (Resolved): Flexible Alias Entry Input is not available
- works, thanks Phil!
-
05:21 AM Bug #6131 (Resolved): failed chown on startup in /etc/inc/rrd.inc
- fixed
- 03:00 AM Revision 88377787: Don't divide by 0. Ticket #6329
- 02:59 AM Revision 17be206e: Don't divide by 0. Ticket #6329
-
02:10 AM Bug #6328 (Resolved): stale xmlrpc.lock can make config sync stop functioning
- works
05/06/2016
- 11:46 PM Revision 8ad194c0: Clear xmlrpc.lock when restarting php-fpm. Ticket #6328
- 11:46 PM Revision 9fabe2c7: Bump net.inet.raw.recvspace and net.inet.raw.maxdgram by default. Ticket #6223
- 11:44 PM Revision 48a8235e: Bump net.inet.raw.recvspace and net.inet.raw.maxdgram by default. Ticket #6223
- 11:43 PM Revision 96a399cb: Clear xmlrpc.lock when restarting php-fpm. Ticket #6328
-
10:25 PM pfSense Packages Bug #6229 (Resolved): pfblockerng: implode(): Invalid arguments passed in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 4638
- merged, thanks BBcan.
-
07:42 PM pfSense Packages Bug #6229: pfblockerng: implode(): Invalid arguments passed in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 4638
- I have posted a PR https://github.com/pfsense/FreeBSD-ports/pull/125 for this issue.
When $pfb['interval'] is ... -
12:31 AM pfSense Packages Bug #6229 (Feedback): pfblockerng: implode(): Invalid arguments passed in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 4638
- Pushed a fix to make sure it's an array before it hits that line. BBcan might want to check that thread to find root ...
-
12:23 AM pfSense Packages Bug #6229 (Confirmed): pfblockerng: implode(): Invalid arguments passed in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 4638
- I misread that as it having been fixed previously. Still being reported as an issue.
https://forum.pfsense.org/inde... -
10:07 PM Bug #6329 (Resolved): Division by zero in /usr/local/www/status_queues.php on line 125
- fixed
-
09:57 PM Bug #6329 (Resolved): Division by zero in /usr/local/www/status_queues.php on line 125
- status_queues.php can divide by zero with $bigger_stat.
-
08:34 PM Bug #6120 (Confirmed): Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- It happens on full installs going from 2.3->2.3.1 as well, just not from 2.2.x or earlier to 2.3.x.
-
03:41 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Greg M wrote:
> Hi!
>
> It happens also on full install just tested it.
> I have to save advanced settings then ... -
02:38 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Hi!
It happens also on full install just tested it.
I have to save advanced settings then it prompts for login (o... -
08:10 PM Revision 1fd8a552: Miscellaneous Textual Correction - Firewall / Rules
-
06:45 PM Bug #6328 (Feedback): stale xmlrpc.lock can make config sync stop functioning
- fix pushed
-
06:44 PM Bug #6328 (Resolved): stale xmlrpc.lock can make config sync stop functioning
- If anything prevents unlock($xmlrpclockkey); in xmlrpc.php from being hit, the config sync will stop functioning unti...
-
05:16 PM Revision 1f7ea38c: Add pstree to poudriere list
-
05:15 PM Revision d46fc346: Add pstree to poudriere list
-
05:15 PM Revision 9d33429f: Add pstree to poudriere list
-
04:04 PM Bug #6327 (Resolved): Alignment defect in forms
- Hi,
I have a small general misalignment in forms (see attachments)
* Current Base System 2.3.1.a.20160505.1243
... -
02:22 PM Revision 3b577b94: Remove a wrong comment I left by accident and make it really remove packages. Fixes #6137
-
02:22 PM Revision 18bd1ccb: Remove a wrong comment I left by accident and make it really remove packages. Fixes #6137
-
01:51 PM Bug #6136: System Update settings page branch selection text is bogus on systems upgraded 2.3-RC to 2.3-RELEASE
- It's much better, works perfectly for me
-
01:40 PM Revision e079998e: Change the default output of pkg.php lists to be encoded before display. Preserve the old behavior as an option in case a package needs it
-
01:32 PM Revision d6ab7496: Change the default output of pkg.php lists to be encoded before display. Preserve the old behavior as an option in case a package needs it (I didn't see any current ones that appeared to rely on the behavior, however)
-
01:32 PM Revision 45c50e6f: Change the default output of pkg.php lists to be encoded before display. Preserve the old behavior as an option in case a package needs it (I didn't see any current ones that appeared to rely on the behavior, however)
-
01:29 PM Revision 828ec6af: Change the default output of pkg.php lists to be encoded before display. Preserve the old behavior as an option in case a package needs it (I didn't see any current ones that appeared to rely on the behavior, however)
-
12:04 PM Bug #6137: Old package inc files may cause problems post-upgrade
- Adam Thompson wrote:
> I think I have two firewalls still running 2.2.x, so I should be able to test in a "real worl... -
11:44 AM Bug #6137: Old package inc files may cause problems post-upgrade
- I think I have two firewalls still running 2.2.x, so I should be able to test in a "real world" scenario.
Can yo... -
09:30 AM Bug #6137 (Feedback): Old package inc files may cause problems post-upgrade
- Applied in changeset commit:18bd1ccb8770fc656e80d0cdc0c8900b8a960a18.
-
09:21 AM Bug #6137: Old package inc files may cause problems post-upgrade
- It was my fault, I forgot part of the code commented out. Fixed now.
-
02:56 AM Bug #6137 (Confirmed): Old package inc files may cause problems post-upgrade
- The upgrade log shows it doing the package uninstall as configured, and it's correctly reinstalled post-upgrade, but ...
-
08:55 AM Bug #6326 (Resolved): pkg.php outputs saved data without encoding, leading to a potential stored XSS
- pkg.php displays lists of items saved by some packages. In the list, the item data entered by users is printed withou...
-
07:27 AM Bug #6304: Incorrect Queue assigment of ESP traffic with DSCP floating rule
- Ok, I never paid attention before.
Thanks for your answer.
You can close this topic. -
07:25 AM Bug #6304 (Not a Bug): Incorrect Queue assigment of ESP traffic with DSCP floating rule
- If you have an existing state for the traffic, it won't utilize new shaper rules until the state is killed or expired...
-
07:18 AM Bug #6304: Incorrect Queue assigment of ESP traffic with DSCP floating rule
- In fact, it is working now but I needed to shut my link for few minutes to activate correct assignment, is it normal?...
-
07:26 AM Bug #6325 (Duplicate): gateway failure notification is backwards
- Duplicate of #6134, already fixed on 2.3.1
-
07:21 AM Bug #6325 (Duplicate): gateway failure notification is backwards
- I have a routing group CMST_Failover on which I have my main comcast router and an LTE fallback modem attached as WAN...
-
07:06 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- Chris Buechler wrote:
> I setup a test with 2.2.6 with Quagga OSPF and System Patches installed, upgraded it to 2.3.... -
02:01 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- I setup a test with 2.2.6 with Quagga OSPF and System Patches installed, upgraded it to 2.3.0 via auto-update (thinki...
- 06:54 AM Revision 4bb39810: Add authorizedkeys to exclusion in status.php, and fix. While these are public keys and hence not sensitive, they're also of no diagnostic value. Suggested-by: Denny Page
- 06:53 AM Revision abb48814: Add authorizedkeys to exclusion in status.php, and fix. While these are public keys and hence not sensitive, they're also of no diagnostic value. Suggested-by: Denny Page
- 06:14 AM Revision 0972379a: Update diag_nanobsd.php now that permanent rw is default. Ticket #6184
- 06:13 AM Revision 3bb5e399: Update diag_nanobsd.php now that permanent rw is default. Ticket #6184
-
05:42 AM Bug #6296: Interface dies with IPsec and SMP
- Hi,
I hit also the troubles. 100% kern, I ran ddb by hand disabling ddb.conf scripts to make a minidump and to try... -
04:22 AM Bug #6296: Interface dies with IPsec and SMP
- This has been happening to me, the OUTBOUND traffic on the LAN interface continues to work but the driver or somethin...
- 04:52 AM Revision 8e23a630: Only try to chown files that still exist. Ticket #6131
- 04:52 AM Revision 96860e98: Only try to chown files that still exist. Ticket #6131
- 04:29 AM Revision aeb81f5b: Fix #6322 Allow expanded forms of alias entry
- Forum: https://forum.pfsense.org/index.php?topic=111361.0
- 04:29 AM Revision 176a139b: Merge pull request #2937 from phil-davis/patch-1
-
03:49 AM Feature #6324: Improve IKEv2 multiple traffic selector per SA configuration GUI
- The GUI should be as described so it's more clear what you're actually configuring.
-
03:38 AM Feature #6324 (Closed): Improve IKEv2 multiple traffic selector per SA configuration GUI
- On IPsec IKEv2 tunnels, by default all defined Ph2s are configured within a single SA.
This could end up with undesi... -
03:44 AM Bug #6180 (Resolved): Package reinstall post-upgrade gets stuck in loop with no Internet connectivity
- fixed
-
03:36 AM Bug #6177 (Confirmed): pkg update checking with no Internet access kills web GUI
- What's been done so far all works and definitely helps.
But, pkg processes will still pile up and hang the GUI, i... -
03:07 AM Bug #6142 (Resolved): Validate and adjust apinger to dpinger parameters on upgrade
- all works. Thanks Phil!
-
02:22 AM Bug #6115 (Resolved): Update repo before get update information
- works
- 02:05 AM Revision aa3890c7: Fix #6322 Allow expanded forms of alias entry
- Forum: https://forum.pfsense.org/index.php?topic=111361.0
-
01:45 AM Bug #6302 (Feedback): Throughput and responsiveness issues when routing a small number of connections across local subnets
- I think we've narrowed this down via email to something traffic shaping config-related rather than a bug.
-
01:38 AM Bug #6166 (Resolved): requests to diag_system_activity.php can pile up on slow systems
- fixed
-
01:23 AM Bug #6315 (Confirmed): tftp-proxy is not functioning properly through xinetd
-
01:21 AM Bug #6223 (Feedback): IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- I set it as committed on "shthead"'s system and it seems to be fine.
-
01:15 AM Bug #6184: 2.3 NanoBSD issues with getting stuck read-only mounted
- pushed clean up of diag_nanobsd.php now that things are always rw. That should take care of this for 2.3.1
- 12:54 AM Revision f8e730bb: Remove bcrypt-hash from status.php config dump. Noticed by Denny Page
- 12:54 AM Revision ecf8ef64: Remove bcrypt-hash from status.php config dump. Noticed by Denny Page
-
12:44 AM Bug #6167 (Confirmed): IPsec IPComp not working
- patch broke the build of cryptostats so was reverted.
-
12:41 AM Feature #6306 (Resolved): Bring back hostname infobox in menu bar
- looks good
-
12:36 AM Bug #6189 (Resolved): Boot up troubles with ramdisk and alias tables
- works
05/05/2016
-
11:58 PM Bug #6178 (Resolved): crash reporter should ignore PHP warnings in release versions
- fixed
-
11:58 PM Bug #6303 (Resolved): Editing additional DHCP pools not working
- works
-
11:55 PM Bug #6323 (Duplicate): Quagga ospf doesn't work with static routes
- duplicate of #6305
-
11:53 PM Bug #6323 (Duplicate): Quagga ospf doesn't work with static routes
- OSPFd is ignoring static routes in zebra.conf.
It began after router has been updated to v2.3(Quagga_OSPF ver. 0.6.... -
11:52 PM Bug #6131 (Feedback): failed chown on startup in /etc/inc/rrd.inc
- happened upon this. With RAM disk enabled, there can be file changes between the glob and chown. Fix pushed
- 11:44 PM Revision a9626fd1: Display Ports/Address based on tab name
- (cherry picked from commit bef0e5ae3ec592d0e28b0b7bbb49591cce7cd218)
- 11:43 PM Revision bef0e5ae: Display Ports/Address based on tab name
-
11:40 PM Bug #6322: Flexible Alias Entry Input is not available
- Applied in changeset commit:aa3890c75ef104597664b1ba1d2d326aaa1e25f7.
-
11:30 PM Bug #6322 (Feedback): Flexible Alias Entry Input is not available
- merged, thanks Phil!
-
09:06 PM Bug #6322: Flexible Alias Entry Input is not available
- Pull Request https://github.com/pfsense/pfsense/pull/2937
-
09:04 PM Bug #6322 (Resolved): Flexible Alias Entry Input is not available
- In 2.2.* it was possible to enter various strings into the "address" field of an alias detail line. The data would be...
-
11:26 PM Bug #6136 (Feedback): System Update settings page branch selection text is bogus on systems upgraded 2.3-RC to 2.3-RELEASE
- fix pushed
-
08:56 PM Revision 860ffdef: Miscellaneous Textual Correction - Firewall / NAT
- (cherry picked from commit 51decff4c2a9da179773b32f951fb73ee967866a)
- 08:55 PM Revision 46933bc3: Merge pull request #2936 from NOYB/Miscellaneous_Textual_Correction_-_Firewall_/_NAT
-
08:53 PM Revision 51decff4: Miscellaneous Textual Correction - Firewall / NAT
- 08:35 PM Revision 7c4d5b9b: Revert "Added option to System > General Setup > webConfigurator to change the title of the Help menu in the navbar to either the system hostname or fqdn."
- This reverts commit e3c5006b819063863f44fd2314dd635bd26e8a8c.
-
08:29 PM Revision e3c5006b: Added option to System > General Setup > webConfigurator to change the title of the Help menu in the navbar to either the system hostname or fqdn.
-
08:19 PM Bug #5528 (Not a Bug): CARP Advbase value is overwritten from the master
- that's by design, you don't want those mismatched.
-
08:07 PM Revision 1d129967: Added option to System > General Setup > webConfigurator to change the title of the Help menu in the navbar to either the system hostname or fqdn.
-
07:34 PM pfSense Packages Bug #6229 (Resolved): pfblockerng: implode(): Invalid arguments passed in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 4638
-
04:04 PM Bug #6321 (New): Problem with connecting l2tp over ipsec from android and windows
- Hi,
Cannot connect to vpn l2tp over ipsec from android behide of NAT (Its working ok in same L2 network) (On this ... -
02:43 PM Revision 5c97738b: Unlock kernel package to make dry-run output more consistent
-
02:43 PM Revision 279fc9b6: Unlock kernel package to make dry-run output more consistent
-
01:41 PM Revision 7efd78c9: Add copies of pre|post upgrade script in /tmp on nanobsd images, they are used by old versions on this path. It fixes #6120
-
01:40 PM Revision 14277cd6: Add copies of pre|post upgrade script in /tmp on nanobsd images, they are used by old versions on this path. It fixes #6120
-
01:07 PM Bug #6295: Crash upon applying CODELQ to untagged parent interface when also applied to daughter VLAN
- I can confirm I have been fighting this issue too today, but with a dual (actually a triple) NIC ESXi host.
In my ... -
11:56 AM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Pi Ba wrote:
> Will it help for 'full' installs?
I couldn't reproduce it on full install. I had a 2.2.5 VM with s... -
11:22 AM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- I'm testing full install right now and will let you know
-
09:01 AM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Will it help for 'full' installs?
-
08:50 AM Bug #6120 (Feedback): Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- Applied in changeset commit:14277cd6a309f73a9339344d688e220d5f3cb0d3.
-
09:34 AM Bug #6314: pfsense 2.3 Captive Portal - no file loaded
- my previous post had a typo: I meant uppercase WIFI_TEST and non WIFI_ZONE, as everyone may have noticed.
The tests ... -
08:04 AM Bug #6314: pfsense 2.3 Captive Portal - no file loaded
- Hi Jim,
thanks a lot for your hint.
As you notice, it seems the same bug as #6278.
My zone was defined all upper... -
07:03 AM Bug #6314: pfsense 2.3 Captive Portal - no file loaded
- Note the differences in your zone name in the URL and in the form tag. Is your zone name actually all lower case or a...
-
05:16 AM Bug #6314: pfsense 2.3 Captive Portal - no file loaded
- Hi Chris,
I tried to simplify the .js lib according to your suggestion, but the problem still persist to me.
I do... -
02:03 AM Bug #6314 (Not a Bug): pfsense 2.3 Captive Portal - no file loaded
- same portal page works for me in Firefox on Ubuntu and Windows. Changing the js to just one line, "alert("test ok")",...
-
08:44 AM Bug #6320 (Resolved): pkg_mgr_install.php?id=firmware displays incorrect firmware version
- The function pkg-utils.inc: get_system_pkg_version() replaces the base version strings with meta version strings if t...
- 08:21 AM Revision 0120cad8: Remove calls which rely in uninitizalized vars
- After analyzing implementations in RELENG_2_1 and RELENG_2_2, this code seems to be a left over after code rewrite
A... -
08:06 AM Bug #6319 (Resolved): DHCP6 DDNS tsig key missing from dhcpv6.conf for reverse zone
- Reverse v6 dynamic zone doesn't get updated despite having "Add reverse dynamic DNS entries." checked. Found out that...
- 07:15 AM Revision e4ea0073: This was right to begin with. Revert "Allow uppercase letters in is_unqualified_hostname as well."
- This reverts commit 3d5fb131796ba6d9c5d53efe77080d7ddb334f22.
- 07:14 AM Revision 8fdddd51: This was correct already. Revert "Allow uppercase letters in is_unqualified_hostname as well."
- This reverts commit 94ccdcb8a4d6f7789fd39c4b6e9876bb689de9a4.
- 06:25 AM Revision fcf77526: Flush link-local IPs so we do not get stale data and do not waste time deleting IP if it is already set to fe80::1:1
- 06:20 AM Revision 3ce8097f: Fix Redmine #6097
- Replace '/usr/bin/grep -vi warning' with '/bin/cat'
- 06:19 AM Revision 8f534d5d: Merge pull request #2922 from NewEraCracker/redmine-6097
- 06:03 AM Revision 94ccdcb8: Allow uppercase letters in is_unqualified_hostname as well.
- 06:03 AM Revision 3d5fb131: Allow uppercase letters in is_unqualified_hostname as well.
-
05:37 AM Revision ba9c6e24: Miscellaneous Textual Correction - Aliases Import
- 05:36 AM Revision a576ae5b: Merge pull request #2933 from NOYB/Miscellaneous_Textual_Correction_-_Aliases_Import
-
04:55 AM Bug #6318 (Resolved): IPsec dashboard widget causes GUI failure
- Since 2.3_1 the webconfigurator is continually being non responsive. Attempting to access my https website on port 44...
-
02:37 AM Bug #6310 (Resolved): services_dnsmasq_domainoverride_edit.php doesn't allow # and !
- works, thanks!
-
02:34 AM Bug #6317 (Confirmed): vlan/track interface generates error "Can't assign requested address" during boot
-
01:41 AM Bug #6317: vlan/track interface generates error "Can't assign requested address" during boot
- PR: https://github.com/pfsense/pfsense/pull/2934
-
01:39 AM Bug #6317 (Resolved): vlan/track interface generates error "Can't assign requested address" during boot
- I have LAN interface that is a vlan and is configured to track my WAN interface. After upgrading to 2.3 I started see...
-
02:27 AM Bug #6184: 2.3 NanoBSD issues with getting stuck read-only mounted
- Thanks. I just did a reboot, ran:
@umount -f /cf; fsck -t ufs -y /cf; mount -f -o rw /cf@
and tried an upgrade ... -
01:31 AM Bug #6285 (Not a Bug): Stability issue with w/ OpenVPN Server on pfSense 2.3
- Thanks for the follow up. I don't see an open bug in OpenVPN's bug tracker on that, it's worth opening one.
Maybe... -
01:23 AM Bug #6097 (Resolved): Crashreporter, should show php warnings, not only their stacktrace..
- Issue fixed in 918f0a9469aa05a9300a25c2ca60e2be83411226.
That won't end up doing anything differently in 2.3.1 si...
05/04/2016
-
10:17 PM Revision 69005da8: Cleanup PORTREVISION for meta port on snapshots
-
10:17 PM Revision 02ec5bd3: Cleanup PORTREVISION for meta port on snapshots
-
09:21 PM Revision fb4d75d9: Setup devel repo properly for staging
-
09:21 PM Revision e3a8a4f8: Setup devel repo properly for staging
-
09:10 PM Revision 3f167b73: Improve log messages
-
09:10 PM Revision e274205d: Improve log messages
-
08:47 PM Revision ea30d645: Miscellaneous Textual Correction - Aliases Import
-
03:18 PM Bug #6285: Stability issue with w/ OpenVPN Server on pfSense 2.3
- I built a VM to do some additional testing with 2.3. I was unable to recreate the OpenVPN connection reset problem. ...
- 02:35 PM Revision d4af7f9e: Removed global variables used on the version 2.2
- 01:41 PM Revision 0cd22307: Fixed #6306
- Please enter the commit message for your changes. Lines starting
(cherry picked from commit 6cde850b8903f0330c5023f7... - 01:39 PM Revision 6cde850b: Fixed #6306
- Please enter the commit message for your changes. Lines starting
-
01:24 PM Bug #6311: pfSense 2.3 locking up
- Jim Pingle wrote:
> Are you using IPsec? Look at #6296 and see if that might be the same condition you are hitting.
... -
08:10 AM Bug #6311 (Feedback): pfSense 2.3 locking up
- Are you using IPsec? Look at #6296 and see if that might be the same condition you are hitting.
-
04:55 AM Bug #6311 (Duplicate): pfSense 2.3 locking up
- Hi pfSense team,
since upgrading from 2.2.6 to 2.3 we have had a series of weird lock-ups on our pfSense clusters.
... -
12:27 PM Revision 8fc18e14: Miscellaneous Textual Correction - Interfaces
- (cherry picked from commit a6a344d8dfad5f2b8199a0cef6c8f401f5e06db8)
- 12:17 PM Revision 2b8f21d0: Merge pull request #2930 from NOYB/Miscellaneous_Textual_Correction_-_Interfaces
-
12:16 PM Revision 23cc8797: Bug fixes to Route53 DynDNS
- Fixed a bug regarding a leading space in $ZoneID that causes an AWS 505 error. Also adds support for updating DNS if ...
- 12:16 PM Revision 06f1f5ab: Merge pull request #2929 from george-gwu/master
- 12:15 PM Revision 6102c368: Fix form submission fields
- Submitting one form may lead to any other filled forms to be also submitted. This commit fixes this flaw
(cherry pic... - 12:14 PM Revision 5ea93948: Merge pull request #2928 from NewEraCracker/exec-sec-fix
- 12:03 PM Revision 794534b4: Fixed #6310 by adding cusom validation pattern
- (cherry picked from commit 1929ff88e91b2e495f8d22c74138721133afbd1f)
- 12:00 PM Revision 1929ff88: Fixed #6310 by adding cusom validation pattern
-
11:38 AM Bug #6315 (Resolved): tftp-proxy is not functioning properly through xinetd
- Client on LAN, TFTP server on WAN, TFTP proxy enabled on LAN. Client on LAN cannot get files from the TFTP server. Th...
-
11:04 AM Bug #6296: Interface dies with IPsec and SMP
- Well well well :)
https://forum.pfsense.org/index.php?topic=107471.msg602590#msg602590
See last message: https://... -
09:44 AM Bug #6314: pfsense 2.3 Captive Portal - no file loaded
- Hi everybody,
I just made a brand new installation of pfsense-2.3-amd64.
I configured and enabled the Captive Por... -
09:40 AM Bug #6314 (Not a Bug): pfsense 2.3 Captive Portal - no file loaded
- Hi everybody,
I just made a brand new installation of pfsense-2.3-amd64.
I configured and enabled the Captive Por... -
08:50 AM Feature #6306: Bring back hostname infobox in menu bar
- Applied in changeset commit:6cde850b8903f0330c5023f7090caabea6ae6438.
-
08:44 AM Feature #6306 (Feedback): Bring back hostname infobox in menu bar
- The new UI design makes this difficult, so for now I have added the information as a tool tip to the pfSense logo. Ho...
-
08:45 AM pfSense Packages Bug #6313 (Duplicate): Squid 0.4.16_2 Local Authentication fails with passwords +8 characters
- Hi,
I just made a fresh install of 2.3 amd64 with Squid 0.4.16_2 (squid-3.5.16).
Adding local Squid users with pa... - 08:44 AM Revision 7a5ab9e2: Skip ro mounting to make nanobsd permanent rw mode regardless of config. Ticket #6184
- 08:44 AM Revision 3cc5a386: Skip ro mounting to make nanobsd permanent rw mode regardless of config. Ticket #6184
-
07:10 AM Bug #6310: services_dnsmasq_domainoverride_edit.php doesn't allow # and !
- Applied in changeset commit:1929ff88e91b2e495f8d22c74138721133afbd1f.
-
07:04 AM Bug #6310 (Feedback): services_dnsmasq_domainoverride_edit.php doesn't allow # and !
- Knocked out as requested.
-
03:27 AM Bug #6310 (Resolved): services_dnsmasq_domainoverride_edit.php doesn't allow # and !
- IP Address field on services_dnsmasq_domainoverride_edit.php should permit IP addresses or # or ! (as noted in the te...
-
06:50 AM Bug #6312 (Not a Bug): Traffic Shaper Wizards Schedulers list differs from Interface Schedulers list
- Yes, that is expected. The difference is that the wizard does not have support for those additional types which would...
-
05:44 AM Bug #6312 (Not a Bug): Traffic Shaper Wizards Schedulers list differs from Interface Schedulers list
- Any *Traffic Shaper Wizard* has the following Schedulers:
* PRIQ
* CBQ
* HFSC
But *By Interface - Scheduler ... -
03:46 AM Bug #6184 (Feedback): 2.3 NanoBSD issues with getting stuck read-only mounted
- pushed change so conf_mount_ro does nothing, so things will stay rw.
-
02:56 AM Todo #6309 (Resolved): Show Patchlevel in Dashboard
- already done for 2.3.1
-
02:44 AM Todo #6309 (Resolved): Show Patchlevel in Dashboard
- After the switch from monolithic updates to modular ones the patchlevel should be shown on the Dashboard next to Vers...
-
01:07 AM Bug #6109: filterlog crash
- Thanks Patrik. We're very near release, but if you can get us a fix in the next couple days it should make 2.3.1.
-
12:55 AM Bug #6109: filterlog crash
- I'm working on a fix that I'd like to be included in 2.3.1. It affects all architectures.
05/03/2016
-
09:27 PM Revision a6a344d8: Miscellaneous Textual Correction - Interfaces
-
09:27 PM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- I mounted rw and the issue is addressed for me. pkg update via shell updated the package repository. Update check is ...
-
02:35 AM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- Hello,
anyone here who reported the same issue and managed to resolve it based on Chris' advice (mount rw) ?
-
09:16 PM Bug #6308: TFTP Proxy can't be turned off
- Not saying it's not a bug, just that it's always been that way.
-
08:51 PM Bug #6308: TFTP Proxy can't be turned off
- So I see. I just loaded the old 2.2.4 ova to look. As this isn't a bug it seems, I would appreciate if it was kept as...
-
05:49 PM Bug #6308 (Confirmed): TFTP Proxy can't be turned off
- The enable/disable only determines whether traffic will ever reach it, it's always ran in the background
-
05:34 PM Bug #6308: TFTP Proxy can't be turned off
- I happened to notice this in the forum, so I figured I would add it here, though it doesn't fit my situation, it seem...
-
05:24 PM Bug #6308 (Resolved): TFTP Proxy can't be turned off
- my system log is being spammed with messages such as:
May 3 15:15:44 xinetd 7815 Reconfigured: new=0 old=1 dropped=0... -
08:25 PM Revision a4bda756: Bug fixes to Route53 DynDNS
- Fixed a bug regarding a leading space in $ZoneID that causes an AWS 505 error. Also adds support for updating DNS if ...
-
08:09 PM Revision 5a0235ca: Show patchlevel together with product version on banners and system information widget
-
08:09 PM Revision 3d3c8094: Show patchlevel together with product version on banners and system information widget
-
07:08 PM Revision f91d05dd: Ensure $nat_if_list is always an array before it is used as one. Fixes #6307
-
07:07 PM Revision 4057a153: Ensure $nat_if_list is always an array before it is used as one. Fixes #6307
-
06:37 PM Bug #6285 (Feedback): Stability issue with w/ OpenVPN Server on pfSense 2.3
- the reconnect issue, what OpenVPN logs do you get at the time?
if there's an issue with manually connecting to th... -
04:00 PM Bug #6120: Password protect, baud on console menu not initially set post-upgrade on nanobsd and 2.3->2.3
- I don't think this is specific to nanobsd as I always used -full and have seen the same problem on all 4 firewalls I ...
-
03:21 PM Revision c38759c0: Fix typo
-
03:21 PM Revision f0b7a730: Fix typo
-
03:21 PM Revision f06b86ca: Fix typo
-
02:20 PM Bug #6307 (Feedback): Console error from filter.inc if $nat_if_list is not an array on line 1934
- Applied in changeset commit:4057a15383009f57d793466e2997e997165c410b.
-
02:06 PM Bug #6307 (Resolved): Console error from filter.inc if $nat_if_list is not an array on line 1934
- array_merge() fails on filter.inc line 1934 when $nat_if_list is not an array
!http://i.imgur.com/VPAnbnF.png!
... -
01:00 PM pfSense Packages Bug #6294: Squid and "Bypass Proxy for These Source IPs"
- Thank you, Jim. That worked.
-
11:58 AM Revision 71002df8: Use right server to replace packagesite
-
11:58 AM Revision 30e1da81: Use right server to replace packagesite
- 10:01 AM Revision 59255714: Fix form submission fields
- Submitting one form may lead to any other filled forms to be also submitted. This commit fixes this flaw
-
09:49 AM Feature #6306 (Resolved): Bring back hostname infobox in menu bar
- This is a request to bring back the hostname displayed in the menu bar as it was up to the 2.2.x releases.
I'm adm... -
01:49 AM Bug #6302: Throughput and responsiveness issues when routing a small number of connections across local subnets
- It's definitely not that simple, it has to be in combination with something else you have configured. Could you go to...
-
01:33 AM pfSense Packages Bug #6305 (Closed): Quagga problems updating routes / mistakenly showing "kernel"-routes while they are not
- please see https://forum.pfsense.org/index.php?topic=111108.0
-
01:32 AM Bug #6291 (Confirmed): Serial console data fields not displayed on nanobsd VGA
- there is no nano_use_vga.txt in 2.3. Not sure offhand if that's intentional
-
01:00 AM Bug #6298 (Confirmed): OpenVPN IPv4/6 Local network(s) initial display state
05/02/2016
- 11:41 PM Revision c81678f4: Bump net.raw.recvspace and sendspace defaults. Ticket #6223
- 11:39 PM Revision ef885517: Bump net.raw.recvspace and sendspace defaults. Ticket #6223
-
11:24 PM Bug #6304 (Not a Bug): Incorrect Queue assigment of ESP traffic with DSCP floating rule
- Hi,
I have a problem with my pfsense, version 2.3 and trafic shapping (PRIQ).
In fact, the pfsense is VPN Passt... - 08:56 PM Revision ac072ab3: Fix missing interface in pool edit. Ticket #6303
- 08:56 PM Revision 96ab6943: Fix missing interface in pool edit. Ticket #6303
- 05:10 PM Revision 30f984fd: Hide freelogins_resettimeout on disable
- (cherry picked from commit 87d6244a5a998447ce1cc7642813ac668f0e1f1b)
- 05:08 PM Revision 87d6244a: Hide freelogins_resettimeout on disable
-
04:57 PM Bug #6133: Firewall Rull Using !LAN address Error
- no replicable test case for this. it fixes itself by the time the system finishes booting so not a huge deal, but ugly.
-
04:55 PM Bug #6286 (Resolved): mobile IPsec PSKs only matching last in ipsec.secrets in some cases
- fixed
-
04:55 PM Bug #6184 (Confirmed): 2.3 NanoBSD issues with getting stuck read-only mounted
- "fixing" the alignment had no impact on this issue on flash that's slow to rw->ro mount. we'll go permanent rw for 2....
-
04:44 PM Revision a63c65a6: Reboot after upgrade when meta package version changed
-
04:44 PM Revision 1c006228: Reboot after upgrade when meta package version changed
-
04:44 PM Revision 01789906: Reboot after upgrade when meta package version changed
-
03:56 PM Bug #6303 (Feedback): Editing additional DHCP pools not working
- fix pushed
-
03:55 PM Bug #6303 (Resolved): Editing additional DHCP pools not working
- Missing the interface in the edit link. Fix coming momentarily.
-
02:39 PM Bug #6302 (Closed): Throughput and responsiveness issues when routing a small number of connections across local subnets
- I have a SG-4860 running pfSense 2.3.0. If I create a single connection from one local subnet to another and attempt...
-
02:37 PM Bug #6118 (Feedback): Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- Should be fixed on next round of 2.3.1-devel snapshots
-
02:32 PM Bug #6287 (Resolved): firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
-
02:10 PM Bug #6287: firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
- 2.3.1.a.20160502.0743: Fixed.
-
01:47 PM pfSense Packages Bug #6301 (Closed): Error on squidGuard's Common ACL tab after enabling blacklists
- After enabling blacklists in squidGuard on 2.3, I see this error above the Target Rules on the Common ACL tab:
War... -
01:20 PM Bug #6299 (Not a Bug): Bind DNS server was removed in 2.3 version
- yes, it's among the removed packages list
-
08:56 AM Bug #6299 (Not a Bug): Bind DNS server was removed in 2.3 version
- Hi,
I had pfsense 2.2.6 and in package list there is bind DNS package
Now its disappeared.
It was removed or it w... -
12:41 PM Bug #6300 (Duplicate): status_queues.php can cause php errors when queues are on disconnected interfaces
- I set up a bridge with 3 interfaces and put HFSC queues on each interface. With the two 'internal' interfaces disconn...
-
12:32 PM Revision 053324be: Miscellaneous Textual Corrections
- (cherry picked from commit 7a5e499901d86edad0c4e653da39dc2a42bbc33c)
- 12:32 PM Revision 5c8b2864: Merge pull request #2927 from NOYB/Miscellaneous_Textual_Corrections
-
12:11 PM Bug #6290 (Resolved): services_captiveportal.php: Waiting period InputBox not available.
- Element now hidden on CP disabled
-
10:21 AM Bug #6290: services_captiveportal.php: Waiting period InputBox not available.
- It works @ 2.3.1-DEVELOPMENT (amd64) built on Mon May 02 06:31:49 CDT 2016
Just a minor bug, if you disable capti... -
09:35 AM Bug #6258: Default gateway switching issue with IPv6 and link local gateways
- Is there anything else I can do to help debug this? Currently my system log is 50-60% comprised of these messages. Ma...
-
09:32 AM Revision d6753db5: Remove a debug leftover
-
09:32 AM Revision 92142efd: Remove a debug leftover
-
07:21 AM Revision 7a5e4999: Miscellaneous Textual Corrections
- 04:36 AM Revision d102e2d5: Add menu item for freeDNS v6
- 04:34 AM Revision ac16181a: Add freeDNS v6 support
- FreeDNS IPv6 support confirmed working using same method as v4 with v6 source address. Simple second service with _us...
-
01:48 AM Revision 60ec8002: Miscellaneous Textual Corrections
- (cherry picked from commit bb80af580c5a4408e42c76c39c67d173540897db)
- 01:48 AM Revision 69658669: Merge pull request #2924 from NOYB/Miscellaneous_Textual_Corrections
-
01:26 AM Bug #6099: igmpproxy does not recognize upstream interface
- Kay Ringmann wrote:
> i read this. So I played a little around. It seems that it's depending from upstream interface...
05/01/2016
-
11:52 PM Bug #6298 (Duplicate): OpenVPN IPv4/6 Local network(s) initial display state
- OpenVPN Server - Tunnel Settings - IPv4 Local network(s) and IPv6 Local network(s) sections. Initial display state i...
-
11:08 PM Bug #6297 (Resolved): rc.linkup doesn't trigger filter reload
- I've come cross an odd bug. Interfaces that have IPv6 enabled (6rd on WAN, track WAN interface on internal interfaces...
-
10:02 PM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Chris Buechler wrote:
> setting net.raw.recvspace=16384, twice the default, has been confirmed to fix this and one o... -
06:09 PM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- setting net.raw.recvspace=16384, twice the default, has been confirmed to fix this and one other unrelated IPsec fail...
-
05:21 PM Bug #6296 (Resolved): Interface dies with IPsec and SMP
- When pushing a stream of UDP traffic over IPsec, an issue can be hit that leaves an interface dead chewing 100% of on...
-
04:30 PM Bug #3395: DHCPv6 client pass rules need to come before bogons
- John Hood wrote:
> This issue seems to have reappeared
No, this was DHCPv6 client, you're referring to server. Un... -
03:01 PM Bug #3395: DHCPv6 client pass rules need to come before bogons
- Oh, yes: 2.3-RELEASE amd64, originally installed with 2.2.1 or so and upgraded, and finally deployed after the upgrade.
-
02:59 PM Bug #3395: DHCPv6 client pass rules need to come before bogons
- This issue seems to have reappeared, though the separation of the rules involves suggests the exact cause might be di...
-
01:32 PM pfSense Packages Bug #6294 (Not a Bug): Squid and "Bypass Proxy for These Source IPs"
- When you put a hostname into that field it is only resolved when the ruleset is loaded. If the hostnames cannot be re...
-
11:31 AM Bug #6099: igmpproxy does not recognize upstream interface
- i read this. So I played a little around. It seems that it's depending from upstream interface.
In my earlier posts ... -
08:59 AM Bug #6295 (New): Crash upon applying CODELQ to untagged parent interface when also applied to daughter VLAN
- On a single NIC system / VM using VLANs pfsense 2.3 crashes and can no longer reboot to a functional state when CODEL...
-
07:06 AM Revision bb80af58: Miscellaneous Textual Corrections
- 06:09 AM Revision a9ea552f: add xe-guest-utilities
- 06:09 AM Revision 0487483f: add xe-guest-utilities
- 06:08 AM Revision e751559b: add xe-guest-utilities
- 05:53 AM Revision 64ec463c: Skip LAN properly with static IP WAN and one interface. Ticket #6093
- 05:53 AM Revision 5330efe9: Skip LAN properly with static IP WAN and one interface. Ticket #6093
-
12:54 AM Bug #6093 (Resolved): Setup wizard configures LAN and breaks things with static IP WAN and one interface
- happened upon this, only affects static IP WAN. fixed
- 12:03 AM Revision 741e8592: Remove stray colon
- (cherry picked from commit cd084ee0e371429b8e30f9fd7be17d1c093a4280)
- 12:02 AM Revision 0a5096fc: Merge pull request #2923 from NewEraCracker/patch-1
-
12:01 AM Revision 1ea1cdba: System Menu - Textual and Punctuation Corrections
- (cherry picked from commit 9f563e371d0ce630f551de19c4263fe5c1686de6)
- 12:00 AM Revision 0a6b3079: Merge pull request #2921 from NOYB/System_Menu_-_Textual_and_Punctuation_Corrections
04/30/2016
- 11:44 PM Revision cd084ee0: Remove stray colon
-
10:21 PM pfSense Packages Bug #6294 (Not a Bug): Squid and "Bypass Proxy for These Source IPs"
- It might be a Squid issue and please let me know if I need to file this issue at Squid upstream.
Following is what... -
10:14 PM Feature #6293 (Duplicate): Include 'if_urndis.ko' kernel module for USB network tethering
- This is a request to compile/include the 'if_urndis.ko' FreeBSH kernel module to allow the connection of generic (i.e...
-
09:19 PM Bug #6292 (Needs Patch): Status Traffic Graph Long Interface name overlaps header
- that's being replaced, so not something we're going to fix (pull request welcome if someone wants to fix it)
-
07:46 PM Bug #6292 (Needs Patch): Status Traffic Graph Long Interface name overlaps header
- Long interface name (Red aligned top right hand side) overlaps rest of graph header
Suggest above graph header align... - 05:33 PM Revision 918f0a94: Fix Redmine #6097
- Replace '/usr/bin/grep -vi warning' with '/bin/cat'
-
07:10 AM Revision 9f563e37: System Menu - Textual and Punctuation Corrections
-
05:43 AM Bug #6099: igmpproxy does not recognize upstream interface
- Kay Ringmann wrote:
>
> While reading many posts related to this problem, i'dont think it's a problem of naming th... -
05:21 AM Bug #6099: igmpproxy does not recognize upstream interface
- I have a APU1D4.
re0 = WAN
re1,re2 = LAGG0
LAGG0 = VLAN1,VLAN10,VLAN20,VLAN30,VLAN40,VLAN50,VLAN60
So the inter... -
01:13 AM Bug #6099: igmpproxy does not recognize upstream interface
- Stefan Heck wrote:
> Basically the thread starter is Entertain-Customer of the Deutsche Telekom, so I am –
> IPTV...
04/29/2016
- 09:29 PM Revision a18a67d7: Fix extrat return statement
- (cherry picked from commit 09c7fae46d2757815c1e4e5ead7c9896783e7013)
- 09:28 PM Revision 09c7fae4: Fix extrat return statement
-
07:04 PM Revision 52a69598: Fix branch description
-
07:03 PM Revision dd81b8f2: Fix branch description
-
07:02 PM Revision c0cb3c73: Fix #6137:
- - Uninstall all packages on current system before upgrade using
pre_upgrade_command script
- Create a file containing... -
07:02 PM Revision 3610a08e: Test for internet connection 3 times trying to reinstall packages after upgrade or config restore. Fixes #6180
-
07:00 PM Revision a07d27e5: Fix #6137:
- - Uninstall all packages on current system before upgrade using
pre_upgrade_command script
- Create a file containing... -
07:00 PM Revision 17b31252: Test for internet connection 3 times trying to reinstall packages after upgrade or config restore. Fixes #6180
-
06:57 PM Bug #6185 (Resolved): pfsense 2.3 w/luajit breaks on 586-class CPUs
- fixed
-
04:39 PM Bug #6291 (Resolved): Serial console data fields not displayed on nanobsd VGA
- Reported in forum: https://forum.pfsense.org/index.php?topic=111006.0
In system_advanced_admin.php the fileds enab... - 03:59 PM Revision 85a96e14: Fixed #6920 - Missing input element
- (cherry picked from commit 01232142532562e4ce108346910e6e0a3249e738)
- 03:58 PM Revision 01232142: Fixed #6920 - Missing input element
-
02:29 PM Bug #6099: igmpproxy does not recognize upstream interface
- I have the same problem, my ISP use VLAN 838, 840, 839 for IPTV. I have made a bridge with thoes vlans, i have an ip ...
-
02:10 PM Bug #6137 (Feedback): Old package inc files may cause problems post-upgrade
- Applied in changeset commit:a07d27e544882076e17da718a3dd98a403761b5c.
-
02:10 PM Bug #6180 (Feedback): Package reinstall post-upgrade gets stuck in loop with no Internet connectivity
- Applied in changeset commit:17b31252fa105f473ac4c77fc200baf9dcb5f51b.
-
01:06 PM Revision 8bedb416: System / Update - Textual Alteration
- (cherry picked from commit 177ed3f66f2d5759f5b821d79aa97021b9daba9d)
- 01:06 PM Revision 630103c3: Merge pull request #2920 from NOYB/System_/_Update_-_Textual_Alteration
-
01:05 PM Revision e0531914: System / Update - Punctuation
- Clean up some punctuation.
(cherry picked from commit 7ceae332c529bfce6cdd47907b1b71da4fddc2a3) - 01:04 PM Revision 56403d17: Merge pull request #2919 from NOYB/System_/_Update_-_Punctuation
- 01:04 PM Revision c91e8374: Comment typos in pkg_mgr_install.php
- (cherry picked from commit 70cd4b96c637d483c4ddefa822db44bb2fe4a792)
- 01:03 PM Revision db1030f8: Merge pull request #2918 from phil-davis/patch-4
- 12:59 PM Revision 99ace4fc: Fixed #6287
- (cherry picked from commit 2342972531265771e65b69b810de0c9d98c69b94)
- 12:57 PM Revision 23429725: Fixed #6287
-
11:01 AM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- Chris,
thanks. I checked this when I got home. But: my system already was mounted r/w (see att'd picture). I have ... -
05:30 AM Bug #6179 (Confirmed): Not obtaining update status on nanobsd when read-only mounted
- I believe new subject is the root cause of everyone's issue here. Where 'pkg update' just returns with no output, tha...
-
11:00 AM Bug #6290 (Feedback): services_captiveportal.php: Waiting period InputBox not available.
- Missing input element restored. Thanks!
-
10:30 AM Bug #6290: services_captiveportal.php: Waiting period InputBox not available.
- Version 2.3.1-DEVELOPMENT (amd64)
built on Thu Apr 28 03:20:14 CDT 2016
FreeBSD 10.3-RELEASE -
10:28 AM Bug #6290 (Resolved): services_captiveportal.php: Waiting period InputBox not available.
- When adding "Pass-through credits per MAC address.", there is no inputbox to insert the "waiting period".
When savin... -
10:59 AM Bug #6289: IPv6 address not given to track6 interfaces on create
- Here is the system log output I get when adding an interface:
Apr 29 11:56:30 check_reload_status Restarting ip... -
10:46 AM Bug #6289: IPv6 address not given to track6 interfaces on create
- It is the default WAN configuration in pfSense with DHCPv6 for IPv6. I have it configured to request a /56 and send ...
-
10:41 AM Bug #6289: IPv6 address not given to track6 interfaces on create
- what type of WAN are you tracking? I fixed that for DHCP6 tracking in 2.3, at least for the circumstance where I was ...
-
09:25 AM Bug #6289 (New): IPv6 address not given to track6 interfaces on create
- If you create a new LAN-type interface with the IPv6 set to track another interface, the new interface does not get a...
-
08:10 AM Bug #6287: firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
- Applied in changeset commit:2342972531265771e65b69b810de0c9d98c69b94.
-
08:00 AM Bug #6287 (Feedback): firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
- Autocomplete needed to be re-applied to the element after each enable/disable action
-
07:37 AM Bug #6287: firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
- Looks like it is actually using port aliases instead of addresses. Looking at it now.
-
05:36 AM Bug #6287 (Confirmed): firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
-
04:10 AM Bug #6287 (Resolved): firewall_nat_out_edit.php: Destination (Type: Network) field auto-complete does not show aliases with networks
- The "Source" field auto-complete works as expected, but "Destination" is not.
Current Base System: 2.3.1.a.2016042... -
07:19 AM Revision 177ed3f6: System / Update - Textual Alteration
-
07:17 AM Revision 7ceae332: System / Update - Punctuation
- Clean up some punctuation.
-
07:12 AM Bug #6288: Remote Config Backup Not Working in 2.3.0 version
- Sorry I didn't notice the change on the last wget command.
Kind regards,
Julien R. -
06:56 AM Bug #6288: Remote Config Backup Not Working in 2.3.0 version
- It works fine against 2.3, I have tried it against over a dozen 2.3 systems and they all work.
The page was edited... -
05:11 AM Bug #6288: Remote Config Backup Not Working in 2.3.0 version
- It was perfectly backuping all pfsenses before this upgrade.
The script stopped working the day after the upgrade ... -
05:09 AM Bug #6288: Remote Config Backup Not Working in 2.3.0 version
- Did you updated the script after 2.3 go live?
I have 25 pfsense upgraded to 2.3 with no more working backup script... -
05:08 AM Bug #6288 (Not a Bug): Remote Config Backup Not Working in 2.3.0 version
- that page is correct for 2.3 as listed in "2.2.6 and newer"
-
04:59 AM Bug #6288 (Not a Bug): Remote Config Backup Not Working in 2.3.0 version
- Same as https://redmine.pfsense.org/issues/5688 in release 2.2.6
Remote backup as described in the wiki https://do... - 04:34 AM Revision 70cd4b96: Comment typos in pkg_mgr_install.php
- 01:20 AM Revision 96bf55d9: Omit local identifier for mobile PSKs. Ticket #6286
- 01:19 AM Revision b3b9c811: Omit local identifier for mobile PSKs. Ticket #6286
04/28/2016
-
11:03 PM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- Same issue as Ken Theime with my ALIX box. Also takes a long time for the page to come up.
-
08:43 PM Bug #6282 (Not a Bug): APU, ALIX default interface assignments changed from 2.2.6 to 2.3
- not true, they're same as they always were. 1 was always the WAN. The APU never factory reset to assigned interfaces ...
-
07:13 PM Bug #6282: APU, ALIX default interface assignments changed from 2.2.6 to 2.3
- My Alix cases have OPT1 - WAN - LAN printed on them, left to right, which is vr2 - vr1 - vr0
My APU cases have the s... -
02:43 PM Bug #6282 (Not a Bug): APU, ALIX default interface assignments changed from 2.2.6 to 2.3
- Default port assignments for PC Engines platforms prior to 2.3 were always:
ALIX: WAN=vr0, LAN=vr1
APU: WAN=re0... -
08:20 PM Bug #6286 (Feedback): mobile IPsec PSKs only matching last in ipsec.secrets in some cases
- fix pushed
-
08:19 PM Bug #6286 (Resolved): mobile IPsec PSKs only matching last in ipsec.secrets in some cases
- The mobile IPsec PSKs are added to ipsec.secrets like the following. ...
- 05:37 PM Revision d817c90b: Retrieve firmware versions via Ajax so we don't hang the GUI if unable to reach the server
- (cherry picked from commit cb6f87f3bf3b616133414ac2863d24892544b828)
- 05:36 PM Revision cb6f87f3: Retrieve firmware versions via Ajax so we don't hang the GUI if unable to reach the server
-
05:01 PM Bug #6285 (Not a Bug): Stability issue with w/ OpenVPN Server on pfSense 2.3
- First, thank you for building a awesome piece of software! This is my first bug report. I hope the information is ...
-
03:41 PM pfSense Packages Bug #6284 (Not a Bug): Firewall Rules change order automatically
- Please discuss this on the forum before opening a bug report.
Also, this is mostly duplicated from #6281 from just a... -
03:32 PM pfSense Packages Bug #6284 (Not a Bug): Firewall Rules change order automatically
- I have created a *pfB_Top_v4 auto rule* to basically block ALL traffic from the Top 20 Spamming countries, using the ...
-
03:07 PM Feature #6283 (New): Register DHCPv6 leases with DNS resolver
- It would be great if pfSense could register DHCPv6 leases with the DNS resolver in the same manner that it can curren...
-
01:44 PM Bug #6281 (Not a Bug): Firewall Rules change order automatically
- Please post in the forum to discuss unless a bug is definitely found.
pfBlocker has its own internal rule ordering... -
01:40 PM Bug #6281 (Not a Bug): Firewall Rules change order automatically
- I have created a *pfB_Top_v4 auto rule* to basically block ALL traffic from the Top 20 Spamming countries, using the ...
-
01:32 PM Bug #6099: igmpproxy does not recognize upstream interface
- Stefan Heck wrote:
> phyint re0_vlan8 upstream ratelimit 0 threshold 1
> ...
> altnet 224.0.0.0/4
Matthias Lan... -
01:27 PM Bug #6099: igmpproxy does not recognize upstream interface
- Stefan Heck wrote:
> After a complete reinstall, it is now working. Maybe some wrong parameter left after the updat... -
11:33 AM Bug #6099: igmpproxy does not recognize upstream interface
- @Matthias Lange
you have mail -
11:28 AM Bug #6099: igmpproxy does not recognize upstream interface
- ok, can we talk offline? here is my email: matthias@lange-sd.de
-
11:25 AM Bug #6099: igmpproxy does not recognize upstream interface
- Unfortunately, I cannot provide my previous config, I have started with pfSense two weeks ago und struggled directly ...
-
11:11 AM Bug #6099: igmpproxy does not recognize upstream interface
- Hi Stefan,
this is exactly my config since month for IPTV with DeTelekom and Entertain.
So maybe the config from ... -
10:54 AM Bug #6099: igmpproxy does not recognize upstream interface
- Basically the thread starter is Entertain-Customer of the Deutsche Telekom, so I am –
IPTV Entertain is using Media... -
09:23 AM Bug #6099: igmpproxy does not recognize upstream interface
- Hello Stefan,
could you please go more in detail on this? Maybe some screenshots. I don't know what you mean with "r... -
09:15 AM Bug #6099: igmpproxy does not recognize upstream interface
- It works even with pfSense 2.3 after I joined Receiver and
other Network Hardware to the same LAN-Subnet.
So pfSen... -
12:49 PM Bug #6177 (Feedback): pkg update checking with no Internet access kills web GUI
- GUI also fixed by sbeaver, should be fine now
- 12:35 PM Revision d9f90dfb: Fix #6251 Brackets around Mbuf figures
- (cherry picked from commit 97f930d1e3af593b20ed56ca951a2109a853a28d)
- 12:35 PM Revision cac808f0: Merge pull request #2917 from phil-davis/patch-4
- 12:34 PM Revision d72e6feb: Provide better messages for invalid alias name errors
- (cherry picked from commit e1f5381f4ecae20922a379b75820af1c9e57927e)
- 12:34 PM Revision 5431a785: Merge pull request #2916 from phil-davis/validaliasmsg
-
12:33 PM Revision 37d9732f: HTML Compliance - Setup Wizard
- (cherry picked from commit a45a72355ef322c76408d73b930a92a5e765b2ca)
- 12:33 PM Revision 3f3df45b: Merge pull request #2915 from NOYB/HTML_Compliance_-_Setup_Wizard
-
12:32 PM Revision 9b7b08d2: Setup Wizard - Punctuation
- Clean up some punctuation.
(cherry picked from commit 65d3ebb2250da7ba4cfef7e840beb2c24cdbbda7) - 12:32 PM Revision 0d77eed4: Merge pull request #2914 from NOYB/Setup_Wizard_-_Punctuation
- 10:42 AM Revision 97f930d1: Fix #6251 Brackets around Mbuf figures
-
10:42 AM Bug #6118: Packages renamed for 2.3 are not handled well, removed rather than installing using the new name
- Jim Pingle wrote:
> On 2.2.x the Quagga package is "Quagga OSPF" and on 2.3 it's "Quagga_OSPF". So the package still... -
08:38 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- You're right, Phillip, coloring were done in thermal sensor widget only. That's my mistake, sorry for misleading you :(
-
07:59 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- This is the code the SI widget uses:...
-
07:14 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- I have to wonder why we need a temperature graph in the SI widget when we have a temperature widget to do that, and i...
-
05:52 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- I just looked on a 2.2.6 system. The Thermal Sensors widget shows a color scale green, yellow, red depending on the t...
-
05:47 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- Awesome!! Thanks, Phil.
-
05:43 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- Brackets around the MBUF usage are fixed by pull request https://github.com/pfsense/pfsense/pull/2917
-
03:44 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- Fixed:
* Temperature progress bar.
Not Fixed:
* "MBUF Usage" value parenthesis is lost on widget refresh.
Los... - 07:46 AM Revision e1f5381f: Provide better messages for invalid alias name errors
-
07:03 AM Revision a45a7235: HTML Compliance - Setup Wizard
-
07:01 AM Revision 65d3ebb2: Setup Wizard - Punctuation
- Clean up some punctuation.
-
03:51 AM Bug #6280 (Not a Bug): OpenVPN issue after upgrade to 2.3 version
- After upgrade remote pfSense box to 2.3 version we can't access remote oVirt Web Console.
We can access to login scr... -
03:29 AM Bug #4326: Limiters on firewall rules where NAT applies drop all traffic
- Arab world
________________
definitive solution
https://forum.pfsense.org/index.php?topic=106640.0
enjoy ... -
02:51 AM Bug #6273: gateway group will not accept "openvpn" as a group name
- Suggested improved and standardized messages in response to invalid alias, schedule, gateway and gateway group names ...
-
01:21 AM Bug #6273: gateway group will not accept "openvpn" as a group name
- The validation is actually done by calling is_validaliasname() and the main criteria is at:
https://github.com/pfsen... -
02:25 AM Bug #6136 (Confirmed): System Update settings page branch selection text is bogus on systems upgraded 2.3-RC to 2.3-RELEASE
- there's still inconsistency here. Some correctly show Stable and Development there, some on latest 2.3.1 even show as...
-
02:25 AM pfSense Packages Bug #6276: Squid non-functional in transparent mode in 2.3 and 2.3.1
- Dear Jim,
maybe you are right, I put my pfsense config file in forum.
https://forum.pfsense.org/index.php?topic=110... -
12:23 AM Bug #6231 (Resolved): Captive portal won't allow changing the voucher charset at all.
- fixed
04/27/2016
-
11:45 PM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- I'm experiencing the exact same issue. Never obtaining update status, high CPU usage, timeouts when browsing the web ...
-
11:27 PM Bug #6192 (Resolved): pfSense 2.3's status_graph.php no longer respects GET parameters
- thanks Phil
-
09:29 PM Bug #6192: pfSense 2.3's status_graph.php no longer respects GET parameters
- This is already done for 2.3.1
https://github.com/pfsense/pfsense/commit/709309eb91bab632957829a389721a800f984d64
T... -
08:52 PM Bug #6192: pfSense 2.3's status_graph.php no longer respects GET parameters
- Here's a patch that does that... need to apply it to /usr/local/www/status_graph.php
-
10:41 PM Revision a120c849: Reduce values of FETCH_TIMEOUT and FETCH_RETRY to help ticket #6177
-
10:41 PM Revision a32867f5: Reduce values of FETCH_TIMEOUT and FETCH_RETRY to help ticket #6177
-
10:20 PM Bug #6273: gateway group will not accept "openvpn" as a group name
- sorry I didn't finished my last sentence -> by the way the gateway group's name "ipsec" works
I understand but I... -
05:11 AM Bug #6273 (Not a Bug): gateway group will not accept "openvpn" as a group name
- It would be a bug if it did. Those cannot be used as a group name, as they're used internally.
-
04:57 AM Bug #6273 (Not a Bug): gateway group will not accept "openvpn" as a group name
- here's the error message
The following input errors were detected:
The gateway name must not contain invali... -
09:15 PM pfSense Packages Bug #6279 (Rejected): squidguard blacklist update not working after initial update
- squidguard is not able to download from http://www.shallalist.de/Downloads/shallalist.tar.gz or from http://urlblackl...
-
08:07 PM Revision f03f91e0: Initialize pkg repo sign command
-
08:07 PM Revision 66f469df: Initialize pkg repo sign command
-
08:06 PM Revision bb7948b2: Initialize pkg repo sign command
-
07:19 PM Revision c67d815c: Cleanup old poudriere log
-
07:19 PM Revision 81611520: Cleanup old poudriere log
-
07:19 PM Revision 26f1087f: Cleanup old poudriere log
-
04:42 PM Bug #6099: igmpproxy does not recognize upstream interface
- Johannes Wanink wrote:
> * Why is the target version now 2.3.2? :-( Is there a workaround?
Because there is no fi... -
03:36 PM Bug #6099: igmpproxy does not recognize upstream interface
- Johannes Wanink wrote:
> * Another stupid question: Is "Affected Architecture" set correct? Should it changed to "al... -
01:45 PM Bug #6099: igmpproxy does not recognize upstream interface
- Tried to compile the version from the "next" branch: https://github.com/pali/igmpproxy
Compilation failed due to a... -
01:43 PM Bug #6099: igmpproxy does not recognize upstream interface
- * Why is the target version now 2.3.2? :-( Is there a workaround?
* Another stupid question: Is "Affected Architectu... -
02:31 PM Revision 1bde429f: Diagnostics / Packet Capture
- A few textual alterations.
(cherry picked from commit 80857665b96e542427965b66d51914d88f1e67e1) - 02:30 PM Revision 3f1aa290: Merge pull request #2913 from NOYB/Diagnostics_/_Packet_Capture
-
01:27 PM Bug #6278 (Resolved): Captive Portal zone name is case sensitive in some places, but not carried through as expected
- There are a couple cases that show problems with Captive Portal with respect to the zone name on 2.3 which were worki...
-
10:55 AM Bug #6277 (Resolved): RRD graphs are not created correctly for interfaces using CODELQ
- If a user sets an interface queue to CODELQ, errors appear in the logs from RRD:
Creating:... -
09:40 AM pfSense Packages Bug #6276 (Rejected): Squid non-functional in transparent mode in 2.3 and 2.3.1
- The conclusions you have reached are incorrect. It is working for others (and myself), and if something is broken it ...
-
09:19 AM pfSense Packages Bug #6276 (Rejected): Squid non-functional in transparent mode in 2.3 and 2.3.1
- In fresh new installation:
Squid non-functional in transparent mode in 2.3 and 2.3.1
I did this solution: https... -
08:51 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- A bunch of other places cast various numbers to (unsigned long long) - that might be all that is needed, and perhaps ...
-
07:41 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- Seems to be there:
https://github.com/pfsense/FreeBSD-ports/blob/devel/devel/php56-pfSense-module/files/pfSense.c#... -
07:20 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- I tried adding integers on a 32-bit system until they got too big - they happily change into float, and format_bytes(...
-
06:30 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- Yes it's the i386 release
-
06:00 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- That is a wraparound of a 32-bit signed integer for 2,290,434,228 bytes.
@Jo S - is this on a 32-bit system? -
05:27 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- Here is the output for this rule:
@78(1422127143) pass in quick on em0 reply-to (em0 192.168.10.1) inet proto tcp ... -
05:14 AM Bug #6272: Wrong numbers in state column of /firewall_rules.php
- what does the output of 'pfctl -vvsr' show?
-
04:54 AM Bug #6272 (Resolved): Wrong numbers in state column of /firewall_rules.php
- Hello,
I have a firewall rule which have weird numbers on the state column, not sure why. Attached is a screenshot... - 08:27 AM Revision fe13359e: Fix Hyper-V SMART disable on widget. Ticket #6147
- 08:25 AM Revision 7de3b9b1: Fix Hyper-V SMART disable on widget. Ticket #6147
-
07:09 AM Revision 80857665: Diagnostics / Packet Capture
- A few textual alterations.
-
06:29 AM Bug #6275 (Resolved): Disconnected IPsec phase 2 entries are not shown in IPsec status
- Hi,
First, many thanks for making this great tool.
I have an IPsec phase 1 containing three phase 2 entries. Th... -
05:49 AM pfSense Packages Bug #6274 (Resolved): Missing tabbar in HAProxy for restricted group
- The HAProxy tabbar is missing (Settings, Frontend, Backend, etc.) for users of a group, where the users are only allo...
- 05:04 AM Revision f8e865e3: add znc from user request
- 05:04 AM Revision 9761e686: add znc from user request
- 05:04 AM Revision e15d0ba2: add znc from user request
-
04:41 AM pfSense Packages Feature #6141: Convert apcupsd package to 2.3
- Sergio Handal wrote:
> It would be nice to convert "apcupsd" package to bootstrap so it can be used in version 2.3.x... - 04:32 AM Revision ebe2129d: Fix input validation check. Ticket #6231
- 04:30 AM Revision 78d8dd47: Fix input validation check. Ticket #6231
- 03:31 AM Revision 021b429d: Add trafshow to poudriere list
- 03:31 AM Revision d6fc5739: Add trafshow to poudriere list
- 03:30 AM Revision 994e862e: Add trafshow to poudriere list
-
03:27 AM Bug #6147 (Resolved): S.M.A.R.T. actions need to be blacklisted/disabled on HyperV.
- fixed
- 03:19 AM Revision d1654153: Add dnstop to build list at user request.
- 03:19 AM Revision e46d9443: Add dnstop to build list at user request.
- 03:19 AM Revision 3b74ae81: Add dnstop to build list at user request.
-
12:23 AM Bug #6267 (Resolved): Captive Portal Allowed IP Addresses direction not correctly loaded on edit
- works, thanks!
04/26/2016
-
11:46 PM Bug #6265 (Resolved): firewall_nat_edit.php allows specifying IPv6 IPs
- fixed
-
11:43 PM Bug #6091 (Resolved): DNS Resolver: Domain Override: Impossible to specify port
- works
-
12:46 AM Bug #6091 (Feedback): DNS Resolver: Domain Override: Impossible to specify port
- fix pushed
-
11:34 PM Bug #6231 (Feedback): Captive portal won't allow changing the voucher charset at all.
- Good catch. Not sure what input you had there which caused the issue, the default character set was fine. Fix pushed
- 10:43 PM Revision 1f269674: PPP here, not L2TP. noticed by https://forum.pfsense.org/index.php?topic=110686.0
- 10:42 PM Revision 17580434: PPP here, not L2TP. noticed by https://forum.pfsense.org/index.php?topic=110686.0
-
09:52 PM Bug #6271 (Duplicate): wrong entry deleted in GUI when editing alias
- duplicate of #6101
-
09:12 PM Bug #6271 (Duplicate): wrong entry deleted in GUI when editing alias
- Browser: Firefox 46.0 (Windows)
Steps to reproduce:
1) In the web GUI, go to Firewall / Aliases / IP and click Ad... -
09:18 PM Bug #6258: Default gateway switching issue with IPv6 and link local gateways
- Chris Buechler wrote:
> Do you see that log "ROUTING: setting IPv6 default route to" at the time as well? There isn'... -
08:36 PM Revision 5eb82498: darken background colors
-
08:18 PM Revision 106e14c1: darken background colors
-
08:10 PM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- Running Alix box and experiencing same issues. Update gear never stops in dashboard. System->Update results in 504 er...
-
03:51 PM Bug #6270: [2.3.1] pfSense Traffic Shaper
- Chris Buechler wrote:
> lagg doesn't support ALTQ
well that explains it, Feature request?! ? -
03:49 PM Bug #6270 (Not a Bug): [2.3.1] pfSense Traffic Shaper
- lagg doesn't support ALTQ
-
03:45 PM Bug #6270 (Not a Bug): [2.3.1] pfSense Traffic Shaper
- Setup Lagg0(2 interfaces) set to LAN connection
1 interface assigned to Wan connection
Going to Firewall -> Traff... -
02:57 PM Bug #6245: Multi-WAN PPPoE not working
- That is not a valid test. You cannot restore a 2.3 configuration to 2.2.x or any earlier version.
I have a test sy... -
02:49 PM Bug #6245: Multi-WAN PPPoE not working
- Because you said it should work I reinstalled the firewall with 2.3 and tested it again. The same Problem here. Becau...
- 02:24 PM Revision 46f3216e: Fix #6267 Load value of direction on edit
- (cherry picked from commit 2aaa473e4fab47d1a4f704ebb568f88d59b7ec3e)
- 02:23 PM Revision 8364c00d: Merge pull request #2912 from phil-davis/patch-4
-
02:22 PM Revision c6d73876: Diagnostics - Menu - Punctuation
- Clean up some punctuation.
(cherry picked from commit 3728bbe5a5340a770ebe3feb526485c28888cdde) - 02:22 PM Revision de2a20a9: Merge pull request #2911 from NOYB/Diagnostics_-_Menu_-_Punctuation
-
02:21 PM Revision 957b7bab: Extra comma, not needed
- Removed an extra comma - more correct IMO
(cherry picked from commit 90968c493922bd9d80a37fe90d1b9440ca7a2333) - 02:20 PM Revision 110668be: Merge pull request #2910 from lukehamburg/patch-2
- 01:17 PM Revision 2aaa473e: Fix #6267 Load value of direction on edit
-
01:06 PM Bug #6269 (Duplicate): SMTP alerts have reversed entry names
- already fixed in #6134
-
12:03 PM Bug #6269 (Duplicate): SMTP alerts have reversed entry names
- The emails that the SMTP alerter sends out now have the wrong entity names in the wrong places.
Example:
v2.2:
... -
12:09 PM Bug #6268: Install package over pfSsh.php it freeze
- Jim Pingle wrote:
> It works here, though it is really not necessary any more. Everything uses pkg
Thanks Jim, It... -
10:39 AM Bug #6268 (Not a Bug): Install package over pfSsh.php it freeze
- It works here, though it is really not necessary any more. Everything uses pkg
To show that it works, I tried mtr-... -
10:33 AM Bug #6268 (Not a Bug): Install package over pfSsh.php it freeze
- When trying to install using pfSsh.php (pfSense developer shell) it freezes and does not return anything.
pfSense ... -
10:00 AM Bug #6233: Bootloop with Alix after 2.3 upgrade
- > Do you have any hardware other than the board itself connected? mini-PCI cards, USB devices.
Well, the only hard... -
09:30 AM Bug #6267 (Feedback): Captive Portal Allowed IP Addresses direction not correctly loaded on edit
- Applied in changeset commit:2aaa473e4fab47d1a4f704ebb568f88d59b7ec3e.
-
08:18 AM Bug #6267: Captive Portal Allowed IP Addresses direction not correctly loaded on edit
- Setting the existing value on edit seems to have been missed.
PR https://github.com/pfsense/pfsense/pull/2912 -
02:51 AM Bug #6267: Captive Portal Allowed IP Addresses direction not correctly loaded on edit
- Sorry, forgot to include Affected version - this is in 2.3
the corresponding "Allowed Hostnames" site (services_ca... -
02:44 AM Bug #6267 (Resolved): Captive Portal Allowed IP Addresses direction not correctly loaded on edit
- Captive Portal "Allowed IP Addresses" (services_captiveportal_ip.php): When specifying direction "to" or "from" and s...
-
08:59 AM Bug #6223: IPsec + OpenBGPD fails with "PF_KEY socket: No buffer space available"
- Chris Buechler wrote:
> I'm looking into a good repeatable test case for this.
hi, i'm affected by this bug too. ... -
07:59 AM pfSense Packages Bug #4736: ladvd crashes, dumps core
- Adam Thompson wrote:
> No longer crashes, but also doesn't detect any peers. Same behaviour on two different i386 f... -
07:59 AM pfSense Packages Bug #4736: ladvd crashes, dumps core
- No longer crashes, but also doesn't detect any peers. Same behaviour on two different i386 firewalls.
-
07:31 AM Revision 3728bbe5: Diagnostics - Menu - Punctuation
- Clean up some punctuation.
-
06:06 AM pfSense Packages Bug #6047: syslog-ng does not logrotate
- I can word this, logs ain't getting rotated.
- 05:45 AM Revision 2ec9afb7: Allow port specification for Unbound domain overrides. Also fix display of input errors. Ticket #6091
- 05:45 AM Revision d051bdd1: Allow port specification for Unbound domain overrides. Also fix display of input errors. Ticket #6091
- 05:34 AM Revision d931d66d: Fix text.
- 05:34 AM Revision 50fa04bb: Fix text.
-
04:40 AM Feature #6038: Add ability to configure which interface is chosen for defining hostname IP in /etc/hosts
- I stumbled over this problem also. In my case I have several LAN interfaces and the wrong one gets registered in /etc...
- 04:01 AM Revision c8bf35c9: Add validation to prohibit IPv6 on firewall_nat_edit.php, where it will generate invalid ruleset. Ticket #6265
- 04:00 AM Revision 776b6190: Add validation to prohibit IPv6 on firewall_nat_edit.php, where it will generate invalid ruleset. Ticket #6265
-
03:46 AM pfSense Packages Bug #6116: pfBlockerNG doesn't automatically update after firmware upgrade, meaning that unbound doesn't start and users don't have internet connection
- ... I've posted a forum query re trying to get pfBlockerNG to update on reboot so I can continue to use RAM disks.
... -
02:22 AM Bug #6232 (Duplicate): Weird temperature bar in Status / Dashboard
- duplicate of #6251, commit was done on that one so closing this.
-
02:21 AM Bug #6251 (Resolved): "System Information" widget formatting breaks after on widget refresh
- fixed
-
02:19 AM Bug #6266 (Not a Bug): OpenVPN configuration mix-up
- A reboot didn't change anything in the advanced box or CSC. Only admin actions determine what's in both of those. Tha...
-
02:11 AM Bug #6266 (Not a Bug): OpenVPN configuration mix-up
- Hi!
A few days ago, my PfSense's Openvpn section make a mistake. i have a server with tunnel mode and client speci... -
12:26 AM pfSense Packages Bug #5869: Squid non-functional in transparent mode in 2.3
- Please come to https://forum.pfsense.org/index.php?topic=110731.0
- 12:12 AM Revision d5ba66fa: localip and gateway aren't used when type is PPP, remove here. Ticket #6264
- 12:12 AM Revision 67ac44ae: localip and gateway aren't used when type is PPP, remove here. Ticket #6264
04/25/2016
- 11:50 PM Revision 6b086a3b: localip and gateway aren't used when type is PPP, remove here. Ticket #6264
-
11:49 PM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- It's not likely specific to your config, rather the environment, but yeah send me a backup. cmb at pfsense dot org
... -
12:42 AM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- Chris, would it help to send my config file (without the personal data) ? If so, to what address ?
-
12:26 AM Bug #6179: Not obtaining update status on nanobsd when read-only mounted
- Chris,
yes, checking the box and preferring IPv4 over IPv6 doesn't help. I rebooted but can't see System/Update. And... -
11:43 PM Bug #6260 (Confirmed): Namecheap Dynamic DNS does not accept * for hostname even though it is valid
- that one's not as straight forward as changing the input validation, since the * needs changes in the back-end handli...
-
09:52 AM Bug #6260 (New): Namecheap Dynamic DNS does not accept * for hostname even though it is valid
- OK I revised the ticket to be only for the * character.
-
09:51 AM Bug #6260: Namecheap Dynamic DNS does not accept * for hostname even though it is valid
- That patch addresses the @ but not the *
Still does not work for *
-
09:32 AM Bug #6260 (Feedback): Namecheap Dynamic DNS does not accept * for hostname even though it is valid
- @ is already fixed -- see #6122
Try the fix on the ticket, if it works, this can be closed, if it still doesn't wo... -
09:27 AM Bug #6260 (Resolved): Namecheap Dynamic DNS does not accept * for hostname even though it is valid
- Namecheap DDNS allows '*' (wildcard), but the page does not accept this value.
-
11:37 PM Bug #6259 (Resolved): Gateways Dashboard Widget - weird radio button placement when Wrench is clicked
- now clear which button goes with which text
-
03:00 PM Bug #6259: Gateways Dashboard Widget - weird radio button placement when Wrench is clicked
- Applied in changeset commit:f5ee7cfd7c2e3f9e7383fb41c47f77bad3507cfc.
-
02:52 PM Bug #6259 (Feedback): Gateways Dashboard Widget - weird radio button placement when Wrench is clicked
- Layout corrected (improved at least)
-
09:17 AM Bug #6259 (Resolved): Gateways Dashboard Widget - weird radio button placement when Wrench is clicked
- This is on Chrome 50 (Mac)
If you click the wrench (aka spanner by some), the Radio buttons pop up in an odd arrange... -
11:35 PM Bug #6124 (Resolved): Factory image - IPsec Profile name in menu
- fixed
-
11:31 PM Bug #6256: Network Address Translation section is removed in Advance NAT menu
- Marco Novielli wrote:
> You mean this (see attachment)? It's definitely under System-->Advanced-->Firewall & NAT fo... -
05:41 PM Bug #6256 (Not a Bug): Network Address Translation section is removed in Advance NAT menu
- it's there the same as it always was. it only displays if you have > 1 interface, same as always, as it has no releva...
-
05:22 PM Bug #6256: Network Address Translation section is removed in Advance NAT menu
- You mean this (see attachment)? It's definitely under System-->Advanced-->Firewall & NAT for me. Right under Bogon ...
-
06:40 AM Bug #6256 (Not a Bug): Network Address Translation section is removed in Advance NAT menu
- Hi,
System -> Advanced -> Firewall & NAT -> Network Address Translation was removed in new version of pfsense (2.3)... -
11:27 PM Bug #6175 (Resolved): firewall_rules_edit possible php warning - floating rules when input error
- fixed
-
11:24 PM Bug #6082 (Resolved): Add leftsendcert=always to ipsec.conf for mobile profiles using IKEv2 and RSA authentication
- works
-
11:21 PM Bug #6263: Encryption options for every P2 on a given P1 are written to each P2 individually inside ipsec.conf with multiple P2 entries + split conn entries
- always been that way (well, w/strongswan, >=2.2.0). Doesn't hurt anything, not worth risking at this stage for 2.3.1.
-
02:27 PM Bug #6263 (Resolved): Encryption options for every P2 on a given P1 are written to each P2 individually inside ipsec.conf with multiple P2 entries + split conn entries
- When multiple Phase 2 entries exist, the encryption options for every P2 inside a given P1 are added to every split c...
-
11:18 PM Bug #6173 (Resolved): /firewall_nat_edit.php: dsttype_selected wrong when edited w/VIPs defined
- all works now
-
11:01 PM Bug #6265 (Feedback): firewall_nat_edit.php allows specifying IPv6 IPs
- fix pushed
-
11:00 PM Bug #6265 (Resolved): firewall_nat_edit.php allows specifying IPv6 IPs
- firewall_nat_edit.php lists IPv6 VIPs and allows entering IPv6 IPs manually, where those aren't valid and result in a...
-
10:36 PM Bug #6264 (Resolved): PHP error on save of PPP on interfaces_ppps_edit.php
- fixed
-
07:13 PM Bug #6264 (Feedback): PHP error on save of PPP on interfaces_ppps_edit.php
- fix pushed
-
07:11 PM Bug #6264 (Resolved): PHP error on save of PPP on interfaces_ppps_edit.php
- ...
-
10:00 PM pfSense Packages Bug #6246 (Feedback): pfBlockerNG - filter rule error if all entries in a block list de-dupe out
- PR merged.
-
09:43 PM pfSense Packages Bug #6246: pfBlockerNG - filter rule error if all entries in a block list de-dupe out
- This issue is fixed in: PR # 121 https://github.com/pfsense/FreeBSD-ports/pull/121/files
-
08:57 PM Bug #6245: Multi-WAN PPPoE not working
- that does work in general but sounds like there is some edge case there.
Alexander: could you get me into the sys... -
05:47 AM Bug #6245: Multi-WAN PPPoE not working
- I have a working setup on 2.3 with this configuration (but with second WAN on OPT1): 2 PPPoE connections, same provid...
-
08:28 PM Bug #6244 (Resolved): Status Interfaces In/Out Byte Counts missing
- fixed
- 07:51 PM Revision d3e5a4ff: Fixed #6259 (Gateway widget form layout)
- (cherry picked from commit f5ee7cfd7c2e3f9e7383fb41c47f77bad3507cfc)
- 07:50 PM Revision f5ee7cfd: Fixed #6259 (Gateway widget form layout)
-
07:15 PM Bug #6255 (Confirmed): PPP Country/Provider/Plan configuration not saved
- moved the PHP error to #6264.
The advanced options are only expanded if you have one of them configured, they're ... -
04:30 AM Bug #6255 (Confirmed): PPP Country/Provider/Plan configuration not saved
- Using a Huawei E220 modem, but I don't think it's related to this specific model.
Go to Interfaces (assign) / PPPs... -
04:59 PM Revision c0570a67: Reduce log level for RELEASE versions. Fixes #6178
-
04:59 PM Revision 45c4bc38: Reduce log level for RELEASE versions. Fixes #6178
-
04:37 PM Bug #6262: radvd
- just cut out all of <dhcpdv6> through </dhcpdv6> or yeah ramode to disabled.
-
12:49 PM Bug #6262: radvd
- "You can manually edit that out of your config."
I'm having trouble finding that ticket. Is it something other than... -
12:22 PM Bug #6262: radvd
- I looked a bit harder at this because my last results were confusing. With no WAN interface and LAN via SLAAC the sy...
-
12:21 PM Bug #6262: radvd
- where you have a single interface assigned, it didn't unset the dhcpdv6/RA config there for the LAN. That was fixed i...
-
12:04 PM Bug #6262: radvd
- Do you mean something other than this:
ServicesDHCPv6 Server & RA
The DHCPv6 Server can only be enabled on inte... -
11:39 AM Bug #6262 (Not a Bug): radvd
- it runs where it's enabled. Disable it if you don't want it to run.
-
11:36 AM Bug #6262: radvd
- (This bug tracker is too sensitive to typos)
RADVD runs when it shouldn't. I have a 2.3-Release test system without ... -
11:30 AM Bug #6262: radvd
- RADVD runs when it shouldn't. I have a test system without a WAN interface and IPv6 via SLAAC. RADVD starts and if ...
-
11:28 AM Bug #6262 (Not a Bug): radvd
-
02:50 PM Feature #5897: Make Alias url table persistent after reboot without internet
- Yes it's nanobsd on full installs works fine!
nanobsd is EOL
Oscar -
02:48 PM Revision 90968c49: Extra comma, not needed
- Removed an extra comma - more correct IMO
-
01:42 PM Bug #6258: Default gateway switching issue with IPv6 and link local gateways
- Hi!
See https://forum.pfsense.org/index.php?topic=108432.msg603891#msg603891
I had dozens of above messages until... -
01:36 PM Bug #6258: Default gateway switching issue with IPv6 and link local gateways
- the interface scope is included where the gateway is link local, and doesn't already contain %.
https://github.co... -
09:11 AM Bug #6258 (Resolved): Default gateway switching issue with IPv6 and link local gateways
- Doing my best to describe this perceived bug in 2.3. Running on an SG-2440. I have 2 WAN interfaces, both of them D...
-
01:05 PM Revision 4b0c907b: Replace vim by vim-lite which has less dependencies and doesn't require X11 by default
-
01:05 PM Revision 7f99f523: Replace vim by vim-lite which has less dependencies and doesn't require X11 by default
-
01:05 PM Revision c710c0e3: Replace vim by vim-lite which has less dependencies and doesn't require X11 by default
- 12:59 PM Revision ffc6d169: Fix #6251 Temperature on System Information Widget
- It just seems that some infrastructure for a temperature bar had been put in place, but the code never finished to ac...
- 12:58 PM Revision 8067ebef: Merge pull request #2909 from phil-davis/patch-4
-
12:57 PM Revision 099ec0d7: Status / System Logs - Punctuation
- Clean up some punctuation.
(cherry picked from commit c9b462825b0b2c53aa3701cd7824ceb82926a754) - 12:57 PM Revision 842fb493: Merge pull request #2908 from NOYB/Status_/_System_Logs_-_Punctuation
-
12:56 PM Revision d8257e0e: Status / IPsec / Overview - Few_Fixes
- 1) If there is no IPsec status response display an info box wrapped in table tags to prevent horizontal scroll bar.
2... - 12:56 PM Revision 74a28f9e: Merge pull request #2904 from NOYB/Status_/_IPsec_/_Overview_-_Few_Fixes
-
12:55 PM Revision 01adf001: VPN Menu - Punctuation
- Clean up some VPN menu punctuation.
(cherry picked from commit be4cebbf13b28cbcce289e96fb22f0355c945be8) - 12:53 PM Revision b6beeb34: Merge pull request #2900 from NOYB/VPN_Menu_-_Punctuation
-
12:10 PM Bug #6178 (Feedback): crash reporter should ignore PHP warnings in release versions
- Applied in changeset commit:45c4bc38c9d3aa9e1bd164d79cb47d03395e12c3.
-
11:55 AM Bug #6257 (Confirmed): Kernel panic with ALTQ
-
07:40 AM Bug #6257 (Resolved): Kernel panic with ALTQ
- Kernel panic with ALTQ being used on 2.2.6 and now on 2.3. Only happens with ALTQ active, does not happen when the sh...
-
11:53 AM Bug #6261 (Not a Bug): error socket: GW:XXX.XXX.XXX.XXX sendto error: 55
- no buffer space available (55), and no route to host (65). Neither of those is a bug in itself. Start a thread on the...
-
10:37 AM Bug #6261 (Not a Bug): error socket: GW:XXX.XXX.XXX.XXX sendto error: 55
- Hi Team,
I use pfSense v2.3 release for my local network (about 350 users connected with 2 LAN and 3 WAN interface... -
11:50 AM Bug #6232: Weird temperature bar in Status / Dashboard
- Displaying fine now.
Thanks! -
06:47 AM Bug #6232: Weird temperature bar in Status / Dashboard
- Note: Also reported by issue https://redmine.pfsense.org/issues/6251 which I happened to notice first.
Pull request:... -
09:37 AM Bug #6115 (Feedback): Update repo before get update information
- Done
-
08:49 AM pfSense Packages Bug #5869: Squid non-functional in transparent mode in 2.3
- If that didn't work, this is not your issue. Please start a forum thread to discuss and troubleshoot.
-
04:42 AM pfSense Packages Bug #5869: Squid non-functional in transparent mode in 2.3
- Jim Pingle wrote:
> Looks good now, others on the forum and here have also confirmed it is working now. Closing.
... -
04:41 AM pfSense Packages Bug #5869: Squid non-functional in transparent mode in 2.3
- I installed new pfsense 2.3 and installed squid.
I did this command: chgrp squid /dev/pf
problem is same exist: Squ... -
08:10 AM Bug #6251 (Feedback): "System Information" widget formatting breaks after on widget refresh
- Applied in changeset commit:eb442fec8bd079760a53372bd9eaed7c502f2e98.
-
03:06 AM Bug #6251: "System Information" widget formatting breaks after on widget refresh
- I was a bit surprised that decent code to do the temperature was just not there in the bootstrap-converted code, and ...
-
01:38 AM Bug #6251 (Resolved): "System Information" widget formatting breaks after on widget refresh
- See attachment.
- 08:05 AM Revision eb442fec: Fix #6251 Temperature on System Information Widget
- It just seems that some infrastructure for a temperature bar had been put in place, but the code never finished to ac...
-
07:13 AM Revision c9b46282: Status / System Logs - Punctuation
- Clean up some punctuation.
-
03:26 AM Bug #6253: Firewall log widget action icon features stop working when new log entries are added dynamically
- in 2), I mean the "mouse hover", not the popup, of course.
-
03:20 AM Bug #6253 (Resolved): Firewall log widget action icon features stop working when new log entries are added dynamically
- Hello,
1)
On the homepage, in the firewall logs section, there is a mouse hover on the red cross which display wi... -
03:23 AM Bug #6254 (Resolved): status_lb_pool.php Save and Reset buttons don't work
- When I want to managed servers (enable or disable) via status_lb_pool.php nothing happens.
-
02:19 AM pfSense Packages Bug #6252 (Not a Bug): Can't access darkstat if webgui is on HTTPS.
- 0. Make sure WebGUI is on HTTPS.
1. Install Darkstat.
2. Configure Darkstat and try to access it.
3. "Access Darks...
Also available in: Atom