Activity
From 12/30/2015 to 01/28/2016
01/28/2016
-
10:41 PM Bug #5764: OpenVPN 'topology subnet' change breaks many upgraded client configs
- topology subnet requires specifying the gateway, so "OpenVPN needs a gateway parameter" is the expected result for ma...
-
04:13 AM Bug #5764 (Assigned): OpenVPN 'topology subnet' change breaks many upgraded client configs
- Not fixed yet
-
07:53 PM Feature #5827 (Duplicate): Captive portal login facebook
- Vincular captive portal ao serviço do Facebook Wifi onde seria permitido o cliente fazer login no portal usando suas ...
-
06:53 PM Feature #3971: IPv6 - Preserve the DUID used for WAN DHCP-PD in the configuration file
- Any chance part one could be looked into for 2.3?
Would be nice to preserve this when reinstalling or moving hardwar... -
- David hasn't been around in a couple weeks. Myself and several people on the forum have tested his change to fix this...
-
- works
-
- Applied in changeset commit:138e4140b740801aa8cdd568bf07021c22eade10.
-
12:55 PM Bug #2164 (Feedback): Captive Portal - RADIUS - Acct-Session-Time does not reset when "stop/start accounting" is enabled
- I committed a modified version of the code in note 9 along with the sleep for 2.3 as a new option "Start/Stop (FreeRA...
-
- The "Auto-exclude LAN address" feature sets up the bypasslan block in strongSwan to exclude the LAN interface specifi...
-
09:10 AM Feature #5822: add an interface 'description' that contains the 'friendly' name 'descr' field
- Dirk-Willem van Gulik wrote:
> Below patch will do the dirty deed. https://github.com//dirkx/Freebsd-src contains a ... -
- Below patch will do the dirty deed. https://github.com//dirkx/Freebsd-src contains a tiny diff that back ports the re...
-
- Ticket #5822 contains a patch that makes this work; along with enough sundry to have BSNMP et.al. also pick this up.
-
08:47 AM Bug #4310: Limiters + HA results in hangs on secondary
- This problem seems to get worse after upgrading to 2.2.6. Now the secondary still hangs even with the limiters and s...
-
08:09 AM
Bug #5804 (Resolved): Alias Auto Suggest Box Entries Display white on white when dark theme is applied
- PR is appropriate and has been merged
-
- re-open while PR is not evaluated and applied
-
01:55 AM Bug #5804: Alias Auto Suggest Box Entries Display white on white when dark theme is applied
- Fix PR submitted
https://github.com/pfsense/pfsense/pull/2562
-
- Based on user reports, it's not fixed
-
- Based on last user reports, it's not fixed yet
01/27/2016
-
- works
-
- Merged the PR and it's built and up now. Installed, looks good here. Problems unrelated to the Bootstrap conversion s...
-
01:19 PM pfSense Packages Todo #5574 (Assigned): Convert the pfSense package HAProxy (net/pfSense-pkg-haproxy) to Bootstrap
-
- Works, also cleans up the symlinks outside /usr/pbi now.
-
03:14 PM Feature #5825 (New): Allow EAP-RADIUS for authentication servers
- When configuring a RADIUS authentication server, one must currently allow unencrypted PAP/SPAP connections. We shoul...
-
- done, works
-
- works
-
- Pull request has been merged, thanks!
-
02:04 AM Bug #5820: System Logs specific help links no longer happen
- See PR https://github.com/pfsense/pfsense/pull/2550 for a proposed solution.
-
- Before the various System Logs code was condensed into a common PHP file, there was a specific help link for each typ...
-
- looks fine
-
02:10 PM
Bug #5803: config history diffs not legible with dark theme
- Applied in changeset commit:143db93e2223db99e5e64d96677722ef8865f670.
-
02:06 PM
Bug #5803 (Feedback): config history diffs not legible with dark theme
- Added diff-text class to style text. The white background is not pretty, but at least it can be read now.
-
02:18 PM
Bug #5804 (Feedback): Alias Auto Suggest Box Entries Display white on white when dark theme is applied
- Override ui-autocomlete style in pfSense-dark.css
-
02:07 PM pfSense Packages Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap
- Pullrequest is 'pending' for that one.. https://github.com/pfsense/pfsense/pull/2499
-
- Bring that up on the forum or a new ticket, it's not related to the Bootstrap conversion, but other work done on the ...
-
05:37 AM pfSense Packages Todo #5575: Convert the pfSense package HAProxy-devel (net/pfSense-pkg-haproxy-devel) to Bootstrap
- Hi there,
from any of the main tabbed haproxy pages IE /haproxy/haproxy_global.php
the 'restart service' link in ... -
-
-
-
-
-
-
-
-
- all 3 values correct now
-
10:20 AM
Bug #5824: Captive Portal field 'Accounting updates' is not selected correctly
- Applied in changeset commit:b796ec88a62851340f95b3288dc9ea57d672baff.
-
10:11 AM
Bug #5824 (Feedback): Captive Portal field 'Accounting updates' is not selected correctly
- Corrected radio button values
-
09:59 AM
Bug #5824 (Assigned): Captive Portal field 'Accounting updates' is not selected correctly
- Thanks. Taking a look now.
-
09:54 AM Bug #5824 (Resolved): Captive Portal field 'Accounting updates' is not selected correctly
- When using Radius accounting in Captive Portal if you change the accounting updates selection and save it the setting...
-
- fixed
-
- Pull Request has been merged, thanks!
-
- Fix PR submitted.
https://github.com/pfsense/pfsense/pull/2547
-
- fixed
-
10:17 AM Bug #5812: RADVD starts at boot when it shouldn't
- Renato Botelho wrote:
> No, this fix was for 2.3.
my report was about 2.2.6 -
- Antonio Prado wrote:
> Renato Botelho wrote:
> > Your config looks wrong
>
> well, that's not my config actually... -
- Renato Botelho wrote:
> Your config looks wrong
well, that's not my config actually. it's the default config.
... -
- Your config looks wrong since you have <track6-interface> set but <ipaddrv6> is not track. I've pushed a better check...
-
- Renato Botelho wrote:
> Can you please show me the content of radvd conf?
here it is:... -
- Antonio Prado wrote:
> Renato Botelho wrote:
> > For for evaluating, please change IPv6 configuration on LAN to 'no... -
- Renato Botelho wrote:
> For for evaluating, please change IPv6 configuration on LAN to 'none' and see if it goes awa... -
- Renato Botelho wrote:
> For for evaluating, please change IPv6 configuration on LAN to 'none' and see if it goes awa... -
- Antonio Prado wrote:
> of course:
>
> <interfaces>
> <wan>
> <enable/>
> <if>lagg0</if>
> <blockpr... -
- of course:
<interfaces>
<wan>
<enable/>
<if>lagg0</if>
<blockpriv/>
<blockbogons/>
<descr><... -
- Can you please share <interfaces> block of /cf/conf/config.xml?
-
09:30 AM Bug #4605 (Feedback): OpenVPN user/pass fails if usernames and/or passwords contain special characters (reopen bugs 4177 and 4340)
- Applied in changeset commit:a3d88018522c0cb30501cb5e4a18ea881230bbc9.
-
- Looks good now, thanks!
-
08:41 AM
Bug #5823: firewall_rules.php (and others): Action Buttons (Add, Save, etc) on several pages are large and ill-formatted
- Although we no longer use bootstrap glyphicons, it seems a piece of our CSS references some glyphicon CSS
That fragm... -
08:40 AM
Bug #5823 (Feedback): firewall_rules.php (and others): Action Buttons (Add, Save, etc) on several pages are large and ill-formatted
- Applied in changeset commit:f4047b7bcbfbd154c024a4b6dc2ae3cc6c7fa787.
-
- The action Buttons (Add, Save, etc) on several pages are large and ill-formatted. It happened some time in the last d...
-
- Duplicate of #1557
-
- /etc/rc.banner and related show the 'descr' field of the interface; with ample options to edit and manage.
Would b... -
04:32 AM pfSense Packages Bug #5821: Asterisk - shared object libperl.so not found
- +Remark Addon:+
If 'res_snmp.so' isn't really needed, uncomment the following line in /usr/local/pkg/asterisk.inc:... -
- +Problem:+
During startup of Asterisk a module (res_snmp.so) cannot be loaded, because the shared object "libperl.... -
03:32 AM Bug #5806: Alias URL table containing an unresolvable FQDN entry causes rules to not load
- Yes, that's exactly the error mesage I was seeing. Thank you.
-
- Workaround applied and confirmed to fix subject issue.
01/26/2016
-
10:32 PM Bug #2800: OpenVPN doesn't work properly with intermediate/chained CAs
- Hey guys,
Still having this issue on 2.2.6
Workaround is working -
- thanks for confirming, Billy.
-
10:03 PM Bug #5730: Xbox One and Windows 10 no longer open ports via UPNP
- Just updated a few minutes ago (built on Tue Jan 26 17:33:47 CST 2016). The miniupnpd binary did not get reinstalled...
-
- Assign to Chris since he is working on it
-
- fixed, leaving for additional testing.
-
- The 'pass out' rules for UDP 500 and 4500 and ESP over-match in mobile IPsec scenarios. The route-to ends up breaking...
-
-
Tab expansion of available playback commands not working (recently broken).
-
- You end up with a syntax error that prevents loading of the ruleset in that case. ...
-
- Back to Luiz to analyze the patch and get it pushed upstream.
-
- it's a problem in upstream, for which we should be able to get a fix along the lines of what was linked above committ...
-
- abort patches like this.
Either determine that it's a problem in upstream, or deal with it in another way.
-
- this was fixed in 10-STABLE some time ago, works in 2.3.
-
- I believe this is fixed upstream.
https://svnweb.freebsd.org/base?view=revision&revision=290391 -
- The FreeRADIUS package on 2.3 is working and is using FreeRADIUS 2.2.9 for those that need the fix and don't want to ...
-
- fixed
-
07:40 AM
Bug #5807: Printing href content inline make mess of printout
- Applied in changeset commit:51f336510d4d21c4a69ccf9e8b8ae2107fe7ed06.
-
07:39 AM
Bug #5807 (Feedback): Printing href content inline make mess of printout
-
- fixed
-
- Applied in changeset commit:36cb313bb35d3d3e19ea121b8f8f1a679988d8d5.
-
- it'd either require changes in dhcpd or redoing how we register DHCP leases in DNS. Either way is non-trivial.
-
08:16 AM
Bug #4061 (Feedback): dhcpd doesn't send client-hostname to peer, breaking DHCP lease registrations w/HA
- On researching this and discussing it with other DEV team members, the issue arises from the current expected behavio...
-
- works
-
- Applied in changeset commit:1ee4cd191803e18ee514b445731e6f4ec3ee93df.
-
- Pull request has been merged, thanks!
-
- https://github.com/pfsense/pfsense/pull/2538
-
- https://forum.pfsense.org/index.php?topic=105872.0
-
01:30 PM Bug #5702: Bug in code manipulating IP subnets - could be pervasive?
- Taking a tip from Phil Davis, I've looked at the high level comparisons used in the codebase, and written a single hi...
-
08:17 AM
Bug #5702 (Feedback): Bug in code manipulating IP subnets - could be pervasive?
-
07:59 AM
Bug #5702: Bug in code manipulating IP subnets - could be pervasive?
- OP proposed PR which after discussion with the DEV team was superseded by PR 2414 and merged
-
- tread carefully, Steve.
-
- I am gradually getting through /usr/local/www - keep getting distracted by finding other things along the way!
I hav... -
10:41 AM
Todo #5777 (Resolved): Review code for text that is not internationalized well
- Internationalization effort is about complete. Any further issues can be addressed as found.
-
- Applied in changeset commit:5c89fc2cf948efba29aa352a9bcaa6bcd83b00c4.
-
- Yep, the colors look good to me as they are now.
-
11:12 AM
Bug #5518 (Resolved): firewall_rules.php - Action icons need color
- No further comment in a month, so this solution is deemed adequate.
-
11:30 AM
Bug #5372 (Resolved): Two rules created if double click the Save button (by mistake)
- "Save" button is disabled on clicking "Save" thereby preventing a double click.
-
- Your config must be pointing to the wrong architecture URL. If you restored a config from a different unit that had a...
-
11:19 AM Bug #5817 (Rejected): pfSense 2.2.2 (x64) auto-upgrades to 2.2.6 (i386)
- As per subject: pfSense 2.2.2 (x64) auto-upgrades to 2.2.6 (i386).
That is the wrong architecture. -
11:20 AM
Feature #5373 (Resolved): Advanced option to add separator or group firewall rules in web gui
-
- I grepped and searched through the packages and fixed up all the instances I could find. If any more turn up, feel fr...
-
11:16 AM
Feature #5513 (Closed): Email notifications - add new field to enter a from: name
- Not for action
-
11:08 AM
Todo #5471 (Closed): Convert glyphicons to font awesome
- Long since completed.
-
11:05 AM
Bug #5672 (Resolved): pkg_edit - XML tag 'listtopic' prints in an excessively large font size.
- Panel headers have been restyled to appear a little less bold
-
11:03 AM
Bug #5669 (Closed): pkg_edit - XML tag 'aliases' prints in yellow in Dark theme
- Duplicated in #5804
-
11:01 AM
Feature #5675 (Feedback): Theme specific textarea background color
- textarea styling has been added to the pfSense-dark.css file
You can also add:
textarea {
background-color... -
- From a Bootstrap-perspective this appears to be fine now. I clicked around most all of the pages and interacted and e...
-
- assigned to Pingle so it will get closed.
-
09:40 AM
Todo #5335: system_firmware_settings.php needs updates for pkg
- Applied in changeset commit:9a4b98287476774483df6b1bbf5a8410f86f47bc.
-
09:34 AM
Todo #5335 (Feedback): system_firmware_settings.php needs updates for pkg
- pkg_update(true) call added on change of fwbranch.
Successfully ested with Renato -
- It's been synced over but needs to catch up to changes with print_info_box* in base, PiBa is working on another PR fo...
-
08:08 AM Feature #5616: Incorrect Wireless Channel
- Just to clarify, these units have a single Atheros 9280 card installed. It is, however, a dual-band radio, which I as...
-
- downgraded to feature.
people attempting multiple 802.11 radios in the same device need a reality check.
-
08:06 AM
Bug #4142 (Resolved): certificate manager certificates that are in use by packages can be deleted
- Lost functionality has been restored and tested by Renato :)
-
07:53 AM
Bug #5550 (Feedback): Viewing NTP service info (/services_ntpd.php) triggers lots of email alerts
- I have set up a similar system but have been unable to reproduce this, or find a likely cause. I have tested 2.2.5, 2...
-
- Works
-
- assigned to Renato for eval
-
- Changed to low-priority feature (was high priority bug) because this has been open for a year with no action.
-
-
- what I just pushed fixes the bridge issue.
The subject issue still exists and is difficult because FreeBSD has no... -
- This happens with bridges during boot because in interfaces_configure, interfaces_vips_configure is run before the in...
01/25/2016
-
- They resolved at the time you tried the lookup. They didn't at the point filterdns tried. Does that happen for all ho...
-
09:31 PM
Bug #5740: Alias Hostnames Are Not Being Updated
- Chris Buechler wrote:
> what's filterdns logging in the resolver log?
There are a ton of `failed to resolve`s. W... -
- works
-
- this is much more sane now. All looks to work as it should, leaving for additional testing.
-
- The "State killing on gateway failure" option in 2.3 is opposite of intended. The confusing "check to disable" likely...
-
- this all works correctly. The gateway's omitted when disabled or down at default settings, and the entire rule is omi...
-
- oh literally printing to a printer, I see.
-
-
Do a print preview on dashboard and you will see the href content in parenthesis following both the page help icon... -
- not following what you mean, how do those examples illustrate the problem?
-
- Thanks for the feedback, Billy.
I re-enabled IPv6, leaving just IGD2 disabled, which seems like it should retain ... -
- Thanks for the confirmation, Will.
This fixes other circumstances I was seeing as well. Following up on that Free... -
- looks good
-
- The change has been reported as working by a couple people who were seeing the issue.
-
- this was fixed by my last commit on #4858
-
- fixed by my earlier commit on #4858, this works once config revision's upgraded to 14.0.
-
- thanks
-
05:45 AM pfSense Packages Bug #4553: BIND IPv6 Reverse Zone problem
- This change was finally merged in https://github.com/pfsense/pfsense-packages/commit/1bab1a2665febb7a9f69adccacda1e7d...
-
- Øistein: thanks for the report. That's a completely separate issue from what was noted here. I opened #5815 for that ...
-
05:45 AM Bug #4709: Correct "State Killing on Gateway Failure" description
- I see this is marked as resolved, but it's still wrong on 2.3.b.20160125.0424
>State Killing on Gateway Failure: F... -
- this is all good now
-
- Looks OK to me
-
-
-
- Works
-
- Steve Beaver wrote:
> The code merged from PR 1081 is present in 2.3, but it relies for its operation on the package... -
10:59 AM
Bug #5787 (Feedback): Display the packagags that are using a particular certificate.
- The code merged from PR 1081 is present in 2.3, but it relies for its operation on the packages providing the informa...
-
10:13 AM
Bug #5796 (Resolved): Make a less-intrusive "Store widget configuration" button when open/close widget is done
-
10:12 AM
Bug #5796: Make a less-intrusive "Store widget configuration" button when open/close widget is done
- I experimented with that, but ran into difficulty where a widget is open and then closed again, resulting in no net c...
-
- Looks good.
The only extra tweak I can think of is to dim the "Save dashboard layout" button when there are no chang... -
08:57 AM
Bug #5796 (Feedback): Make a less-intrusive "Store widget configuration" button when open/close widget is done
- Dashboard has been changed as follows:
# Dashboard is automatically saved on deleting or adding a widget
# "Save" ic... -
09:53 AM
Bug #5794 (Resolved): Apply button can go missing when the UI is in a non-English language
-
09:51 AM
Todo #5789 (Resolved): Convert Form_Select option names to gettext translated strings
-
09:49 AM
Bug #5805 (Resolved): vpn_ipsec.php
-
08:37 AM Feature #5814 (Resolved): pkg Installation log file name
- Since package installation files are now saved to /cf/conf/upgrade_log.txt, it would be great if the file was renamed...
-
- As mentioned by Pingle, no complaints in a while, current privileges seems to be working
-
- Applied in changeset pfsense-packages:commit:109b57fe3a51d65908582f825a398690a03ebd92.
-
- It's best to just take out the HTML or, if it's required, move it to a <sethelp> tag which works like an extended des...
-
- Jim Pingle already removed the HTML tags from field
-
- For example the Notes package highlights the word "Notes" next to the text box that displays/edits the note.
In 2.2.... -
- Already implemented in commit:22d95a680eeba1b5b077ce2fee78adce938a7118
-
- Move it to future version then we have time to think about a way to check all possibilities
-
04:30 AM Feature #5813 (New): Replacement of layer7 filter
- Hi
Seeing as the ipfw-classifyd layer7 filter module has been removed from 2.3, would it be possible to replace it... -
- on a fresh installed box, IPv4 configured on LAN, IPv6
not configured, RADVD is active
01/24/2016
-
10:13 PM
Bug #5810 (Resolved): Inconsistent Padding/Extra Row When Browsing Different Interface Firewall Rules
-
04:31 PM Bug #5810: Inconsistent Padding/Extra Row When Browsing Different Interface Firewall Rules
- Issue looks resolved in build 2.3.b.20160123.1751. Thank you!
-
01:30 PM
Bug #5810: Inconsistent Padding/Extra Row When Browsing Different Interface Firewall Rules
- Applied in changeset commit:a2c5280d92c2707c27cbef318b1ced7122c32b0e.
-
01:27 PM
Bug #5810 (Feedback): Inconsistent Padding/Extra Row When Browsing Different Interface Firewall Rules
- Thanks.
Empty <tbody> has been eliminated. -
- - Occurs when browsing between different interface tabs on the firewall rules page
- There is an extra empty row gen... -
- The quickest way around this is to switch to PRIQ as the scheduler. That doesn't rely on absolute bandwidths and will...
-
12:16 PM Bug #5752: Problem with loading firewall rules when using pfBlocker
- Nope, I only use:
Squid, snort, openvpn client export and RRD summary.
I think this is stock issue not package rela... -
- @Greg M,
Do you use pfBlockerNG? I can't find an issue with the package code... -
- +Problem:+
Typo in siproxd config file prevents correct loading of plugins
+Description:+
Using siproxd packag... -
05:32 AM
Bug #5808 (Closed): Firewall rules issue in the latest 2.3beta snapshot
-
- sbeaver just committed a fix - https://github.com/pfsense/pfsense/commit/055375927e013fb9227ea48cc7b2c3f7491fe33d - I...
01/23/2016
-
- PR https://github.com/pfsense/pfsense/pull/2523
There is a syntax error in the latest commit - add a colon : after t... -
10:31 PM Bug #5808 (Closed): Firewall rules issue in the latest 2.3beta snapshot
- When i try to open firewall-->rules i get an error:
Parse error: syntax error, unexpected '?>', expecting ':' in /... -
- https://github.com/pfsense/pfsense/commit/0d711d380b719219a802b2b67db4ccce6cb645d3 removes print_info_box_np() comple...
-
- https://github.com/pfsense/pfsense/commit/fd4803d2c1c778dc00bcb5b8338b29d6cb04efd8 got rid of another remaining call ...
-
-
It's especially bad on pages with an array tab menu. Pretty much takes over the page.
Examples:
?(/help.php... -
- Just got the update and the issue appears to be resolved. FYI, even though IPv6 was disabled in options, @pkg info m...
-
- Happened on v2.2.6, and reproduced on v2.2.4 too, but with a different error in the system log.
Removing the problem... -
- Set up an URL alias pointing to an internal http resource, listing about 25 entries, each a public FQDN.
Set up a po... -
03:08 PM Bug #5748: stf interface IPv6 IP never leaves tentative state
- Hi Chris,
I just updated to the Sat Jan 23 11:51 build & my ipv6 gateway monitor is running now.
I'll let you k... -
02:20 PM
Bug #5805: vpn_ipsec.php
- Applied in changeset commit:e7f81ad6603eeccc8189e05a16ef12413a418c57.
-
02:15 PM
Bug #5805 (Feedback): vpn_ipsec.php
- Fixed P2 delete button index
-
01:25 PM
Bug #5805: vpn_ipsec.php
- https://forum.pfsense.org/index.php?topic=105776.0
-
01:25 PM
Bug #5805 (Resolved): vpn_ipsec.php
- When multiple P1s and P2s are in use, attempting deleting one P2 may delete the wrong one
-
- I do still see the same behavior.
On the client side, after updating, I reset to factory defaults and restored the w... -
08:10 AM
Bug #5802: "Additional BOOTP/DHCP Options" shouldn't be under "Network booting"
- Applied in changeset commit:5dfc79c9f05c77ecf4ceff2981d81729077bb8ea.
-
08:04 AM
Bug #5802 (Feedback): "Additional BOOTP/DHCP Options" shouldn't be under "Network booting"
- Section relocated as requested
-
07:28 AM
Bug #5804: Alias Auto Suggest Box Entries Display white on white when dark theme is applied
- The text is present, but has been styled as white characters on a white background when the dark theme is in use. Ple...
-
- recent regression
-
-
Alias auto suggest box is empty in firewall rules edit (and other locations too).
The box looks about the righ... -
- changed to a + which addresses this.
-
- oh yeah, I missed that recent change. This is good now.
-
06:02 AM Feature #5665: Allow moving of the "Available Widgets" bar just like other widgets
- Wow, just noticed what Philip said. This is great now, much better and more clean!
-
- Now there is just a red "+" button on the right-hand side of the breadcrumb bar, before the help "?". That means the ...
-
06:14 AM Bug #5801: Diagnostics drop-down menu does not show all options
- Sorry about that guys - I didn't realize. I will switch back to default.
-
- ah yeah, thanks Phil. That's not the default, and as it says right there "The fixed option is intended for large scre...
-
- System->General Setup
If you have Top Navigation set to Fixed then there is no way to make the drop-down menu scroll... -
- The change from strongswan issue 1269 has no impact on this issue.
-
- Works.
Thanks Anders! -
- Same problem was still in 2.3.
When interfaces_bridge_configure runs during boot, the tap interfaces don't yet exis... -
- The option to save (or not save) is needed when a widget is opened or minimized - in that case we probably do not wan...
-
- what I just pushed should cover the last of this. Now disabled by default. Upon upgrade, any systems with it set to d...
-
- The plugin load changes are fine, good to be rid of the file moving hack. The fact that <unityplugin/> tag actually d...
-
- Do a diff between two revisions on diag_confbak.php with the dark theme and you end up with white text on a white bac...
01/22/2016
-
- not an important issue, workaround suffices for the rare situations where this is desirable.
-
- I get the reason, most won't need it taking up screen space at the top, but it's fine as is too. Maybe just add an op...
-
- fixed
-
- the change in the patch on PR 206231 seems reasonable, not sure why it's still sitting there. I added that to our bui...
-
- There was an issue with SSL/TLS with /30 tunnel networks fixed earlier this week. I suspect this was fixed at that po...
-
- works
-
- After splitting off the "Network booting" section on services_dhcp.php, the "Additional BOOTP/DHCP Options" settings ...
-
- all good
-
- fixed
-
05:30 AM
Bug #5793: "Strict User-CN Matching" label appears when field is disabled
- Applied in changeset commit:ee2a6908784f93f904ce603f0db8c96d5bd81140.
-
05:22 AM
Bug #5793 (Feedback): "Strict User-CN Matching" label appears when field is disabled
- Fixed
-
- I reverted the IGD2 and IPv6 change that seems to have been the start of this problem so we can confirm or deny wheth...
-
- not seeing that on iOS with Safari or Chrome, or OS X with Chrome. On short pages, like the WoL page shown, after cli...
-
- See screenshots.
-
- Traceroute option unavailable for selection on Macbook with 1440x900 resolution. Since there is no way to scroll on ...
-
05:35 PM
Bug #5796: Make a less-intrusive "Store widget configuration" button when open/close widget is done
- I think the only time we really *need* the save button, is after dragging/moving a widget.
I'll give some thought ... -
- 1) When a widget is added to the dashboard the widget config is automagically saved - good
2) When a widget is remov... -
- there are a lot of other possibilities for port conflicts too. HTTPS on port 80 with HTTP->HTTPS redirect enabled (th...
-
- Looks much better now. The only thing that doesn't work is changing the type of an existing interface, but I'm not su...
-
12:10 PM
Bug #5797: interfaces_ppps_edit.php -- Correct options for type are not displayed
- Applied in changeset commit:daa5312f4cd54bb1671624a4d1b3fa066f80e4c1.
-
12:04 PM
Bug #5797 (Feedback): interfaces_ppps_edit.php -- Correct options for type are not displayed
- javascript show/hide revised
-
- Edit an entry on interfaces_ppps_edit.php and the correct options are not displayed. Choosing another type from the d...
-
- Rather than trying to block the traffic, CARP should really just ignore its own advertisements. Fix the root issue ra...
-
- assigned to Pingle until he assigns it elsewhere.
-
- Adding this primarily for documentation purposes. Normally with our default ruleset pf will block CARP packets coming...
-
- Assigning to me for the time being. PiBa-NL is going to sync this over from haproxy-devel which should allow it to be...
-
- This one looks ok from a Bootstrap point of view. PiBa is going to sync it over on top of the main haproxy package at...
-
02:13 PM
Feature #5608 (Closed): Clicking on widget name does not open widget function
- Completed as requested
-
02:11 PM
Bug #5596 (Closed): Button icon alignment
- No longer reqquired
-
- Looks good after my last push, confirmed working on two boxes.
-
-
-
- Fixed by commit:934083c79e1cb06ca1ac924cb2bc5e054f2c6ce5 but I added wrong ticket # on commit log
-
- Tested on multiple boxes, I can't break it, looks good. Could use some better styling in places but it's functional.
-
- Looks good as far as I've been able to test. If someone else hits a problem, it can be reopened with more detail.
-
- I've had it running and working fine for a week now. If there are other non-Bootstrap related issues (e.g. not workin...
-
- I managed to get a working setup on two separate 2.3 boxes talking to each other and pushed some more fixes a couple ...
-
- The Bootstrap-related pieces are fine, and the primary features of the package function when properly configured.
... -
- The Bootstrap-related pieces are fine, and the package does function when properly configured.
If there are other ... -
- Sleep time for me now!
But if someone wants to re-engineer print_info_box_np() to have more nicely laid-out paramete... -
- Applied in changeset commit:3b3a95e5511ef5f60f8142480ddf5adcaed88cb1.
-
- I can modify print_info_box() so it takes:...
-
07:39 AM
Bug #5794 (Feedback): Apply button can go missing when the UI is in a non-English language
- Problem alleviated by PR https://redmine.pfsense.org/issues/5794
-
07:15 AM
Bug #5794: Apply button can go missing when the UI is in a non-English language
- Phil,
I don't like the "automatic Apply" thing in print_info_box_np at all. When I started work on this project I wo... -
- guiconfig.inc print_info_box_np() has some code to help "guess" if the apply button needs to be shown. It does stuff ...
-
- Tried it on a couple boxes after gitsync, worked as expected.
-
- Applied in changeset commit:7a2490e19246689b8c658f2bdef2899412deb182.
-
- The command line script to parse filter logs into a more human-readable format no longer works....
-
- I don't have a means to test this one, no access to an MLPPP setup. Tried to rig one up in mpd a few different ways b...
-
- Already pushed a fix, you can gitsync from the console in a shell prompt:
pfSsh.php playback gitsync master
or:... -
10:32 AM Bug #5798 (Resolved): 2.3 lastest build GUI broke noway to roll back
- Parse error: syntax error, unexpected '}' in /etc/inc/vpn.inc on line 1632 Call Stack: 0.0001 228096 1. {main}() /usr...
-
-
- Tried to create/change interface name to match an interface group name and vice versa - error message as expected eve...
-
- Applied in changeset commit:b824f18c9f14dcae22f9f155bd733df2fd56d44c.
-
- Applied in changeset commit:24049bb6cc494bd0bb367a0af8b1ab495964b1fa.
-
- Add validation when renaming an Interface (description) and renaming/creating an Interface Group to make sure that th...
-
-
- Fixed it for me. Thanks.
-
- Yep, code is cleaner after PR https://github.com/pfsense/pfsense/pull/2505
If I had actually read the original code ... -
- Should be OK now
-
- thanks Anders, appreciate the leg work on that. Looks to test out fine, will leave to feedback for additional testing.
-
12:00 AM Bug #4206 (Feedback): Missing route creation on DHCP-PD lease where ia-na != ia-pd
- Applied in changeset commit:2caea6a2cca2cbc37f1d99ebd8e5ea8277661d77.
01/21/2016
-
- PR https://github.com/pfsense/pfsense/pull/2501
But also I don't understand why the change is needed - to me the exi... -
-
-
Cannot delete crash report in non English language.
It just won't go away unless language switched to English.... -
- please also check https://github.com/pfsense/pfsense/pull/1638
-
- The "Strict User-CN Matching" text label appears regardless of whether the checkbox is available. The checkbox appear...
-
- please evaluate https://github.com/pfsense/pfsense/pull/2470
-
- Signal 11 is "Bus Error".
Causes include: invalid address alignment (accessing a multi-byte value at an odd addres... -
- Orion: this is a very unusual circumstance, if you're hitting something repeatedly it's probably something different....
-
- The issue is resolved in the new 2.3-BETA - which is in BETA :) so that is why it is marked resolved here.
-
- I'm seeing this pretty regularly trying to configure a brand new SG-4860 with 2.2.6. So I don't think we're quite in...
-
- subject issue doesn't exist. JimP fixed a related issue from linked thread in ef378560d1982cd5ecb93475ef9da12ce19b6a31
-
- Looks good to me. Thanks guys!
-
06:42 AM
Bug #5788: Inconsistent information box behaviour on firewall_rules.php
- Thanks Phil. I failed to notice that :(
I'll be merging your change shortly. -
- The infoblock in Firewall Rules was a bit special and had a hard-coded close button.
Removed by PR https://github.co... -
- Looks good to me, at least seems to be the same as 2.2.x in behavior
-
04:20 PM
Bug #5790: firewall_rules_edit.php: Editing an associated NAT rule does not warn the user that changes are not allowed, silently fails
- Applied in changeset commit:7560e108a9cc6a351b78dabceb3954680a52b461.
-
04:10 PM
Bug #5790 (Feedback): firewall_rules_edit.php: Editing an associated NAT rule does not warn the user that changes are not allowed, silently fails
-
- Editing an associated NAT rule does not warn the user that changes are not allowed. The end result is OK -- the rule ...
-
05:30 PM Bug #5791 (Confirmed): tftp-proxy functionality is easilly broken by unrelated rules
- The anchors on which the tftp-proxy depends, are inserted at the end of the filter chain. Any conflicting rule entere...
-
-
05:35 AM Bug #3176: Hosts file corrupted when using "Register DHCP leases in DNS forwarder"
- Yeah, this is fixed in the last version of dhcpleases.
-
- Applied in changeset commit:ceecd29b53b7d570b56fb391a09abb71fe80566b.
-
02:30 PM
Todo #5789: Convert Form_Select option names to gettext translated strings
- Applied in changeset commit:b50d30c3a6d29b02cc7f4fe66f3a16bc7a4ea1a6.
-
02:29 PM
Todo #5789 (Feedback): Convert Form_Select option names to gettext translated strings
- All files updated and tested where appropriate
-
- I am currently going through the code for places in general that are missing gettext() - so I am happy to make the up...
-
11:06 AM
Todo #5789 (Resolved): Convert Form_Select option names to gettext translated strings
- Unless we have a better idea, certain Form_Select arguments will need to have gettext applied before being passed to ...
-
10:07 AM
Bug #5740: Alias Hostnames Are Not Being Updated
- Chris Buechler wrote:
> what's filterdns logging in the resolver log?
Sorry, I've been out of town. I'll get back... -
10:06 AM
Bug #5741: IPs from Random Aliases Lists Are Added to Routes Table
- Yeah, that's the major problem. Trying to replicate is next to impossible. And I don't even know what information t...
-
07:28 AM Bug #5520: IPsec status seems to hang preventing access to the webgui.
- Steve Wheeler wrote:
> In some circumstances the IPSec status page 'hangs' and causes access issues to the webgui.
... -
06:50 AM Bug #4936: dhcpd sets wrong permissions on leases files
- Same error when upgrade from 2.2.2 i386 to 2.2.6 AMD64:
network 10.0.100.0/22: no free leases
I changed the LAN... -
- The part of https://github.com/pfsense/pfsense/pull/1081 that added the information about what packages are using tha...
-
- Applied in changeset commit:7d8c9075c895a8bb09efc74fae9de3a0109b06cc.
-
- Hi!
Any progress on this one?
01/20/2016
-
- Yes, they both have the 'i' icon, but why is there an X option to close this on this page (top right of infoblox), an...
-
06:49 PM
Bug #5788 (Feedback): Inconsistent information box behaviour on firewall_rules.php
-
06:40 PM
Bug #5788: Inconsistent information box behaviour on firewall_rules.php
- You may have a less up to date version. That page was converted to the "infbox" scheme some time ago and now displays...
-
- The information box on firewall_rules.php can be X'd out, which then removes the ability to access it again until a r...
-
- Brice: there is a patch for strongswan issue 1269 in 2.2.7 (https://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/p...
-
06:50 PM
Bug #5784 (Resolved): Strict User-CN Matching on vpn_openvpn_server.php not aligned correctly
-
- Fixed.
-
10:02 AM
Bug #5784: Strict User-CN Matching on vpn_openvpn_server.php not aligned correctly
- The newest Firefox (44) did the same thing.
Should now be fixed.
Thanks Marco. The pictures were a great help. -
10:00 AM
Bug #5784 (Feedback): Strict User-CN Matching on vpn_openvpn_server.php not aligned correctly
- Applied in changeset commit:1ee9fb20a3241e74740cfd278bea458bb8c3e873.
-
- The PBI dir is gone but symlinks are still left around the filesystem to PBI dirs that no longer exist, which cause p...
-
12:46 PM
Bug #5787 (Resolved): Display the packagags that are using a particular certificate.
- https://github.com/pfsense/pfsense/pull/1081
-
11:31 AM Bug #5730: Xbox One and Windows 10 no longer open ports via UPNP
- Practically *everything* uses IGD1 spec. IGD2 is supposed to be backwards compatible, but in practice, it isn't (see...
-
- Applied in changeset commit:2a44b0eb13036701d6265bbffc633fa0deb81bfa.
-
10:14 AM
Feature #5373: Advanced option to add separator or group firewall rules in web gui
- NAT will get this too. I'd like to get some more testing/feedback before doing that though.
-
10:12 AM Feature #5373: Advanced option to add separator or group firewall rules in web gui
- NAT would like to have this separator to, i think...
-
08:19 AM
Feature #5373: Advanced option to add separator or group firewall rules in web gui
- Esc key now cancels the new separator
Enter key saves it
If you try to change pages without saving you will get a... -
- 2 small improvements I believe would be good to have, both when editing a new separator:
- Cancel addition when pr... -
09:10 AM
Bug #5781 (Feedback): services_dhcp.php description label lost on multiple fields where configured
- Applied in changeset commit:ff3da1e7358443f5e00ebf0d30fb9d35aebc88f1.
-
09:04 AM
Bug #5781: services_dhcp.php description label lost on multiple fields where configured
- Updated as requested
-
- There is no check today to make sure WebConfigurator TCP port is being used by OpenVPN and it can end up losing web a...
-
03:10 AM Bug #1629: invalid state table entries after WAN IP change
- Apologies for becoming hyperbolic, but this is verging towards the absurd. The first post on this issue is over 4 yea...
01/19/2016
-
- IPv6 in miniupnpd seems to be enabled in the current build (What even uses IPv6 and upnp anyway?). I inquired at the...
-
- There isn't 'pkg info' in 2.2.x, but it is built without UPNP_IGDV2. That change was made as part of #4321. I believe...
-
- Here's the output of @pkg info miniupnpd@
miniupnpd-1.9.20160113,1
Name : miniupnpd
Version : 1... -
- seems this is some unusual edge case from a recent change in dhcpd. But now I'm seeing it on 2.3 systems that have no...
-
- that's a checksum offloading issue in combination with pf in that case, which should be fixed in 2.3 because it's fix...
-
- Network booting and TFTP server look good now. The NTP and LDAP parts still have the same issue.
-
02:40 PM
Bug #5781: services_dhcp.php description label lost on multiple fields where configured
- Applied in changeset commit:ef2936e640154c0590d8c9fb17f36e5f4c28aa61.
-
02:38 PM
Bug #5781 (Feedback): services_dhcp.php description label lost on multiple fields where configured
- Revised as requested.
-
- duplicate of #4701, thanks Phil and B. Derman.
-
07:09 PM Bug #5785: igb could not setup receive structures
- I've already done that, I still have no network access. The errors seem to have gone away, at least from the console ...
-
- Has no relation to that old bug. You need to tune accordingly.
https://doc.pfsense.org/index.php/Tuning_and_Trouble... -
- I just setup a new appliance and am getting the same error that was posted about 2011 found here...
http://redmine... -
- Sorry for the title. Not sure how to edit it now.
-
- Strict User-CN Matching on vpn_openvpn_server.php?act=edit&id=0 is not aligned correctly. Not selectable on iPhone (...
-
03:17 PM Bug #5721: ALTQ fails with "bandwidth for q... higher than interface" in some circumstance
- So what now? Should a go back to v2.2.5?
Sorry but whatis CSG-79067?
-
- This does not seem to be resolved by upgrading to 2.3. See: CSG-79067
-
- Works fine.
Assign it to Luiz since he fixed it -
-
-
- Not a bug, it works well as it is
-
- This is something David's been working on and has a fix that's been confirmed by a few in this thread.
https://foru... -
- it doesn't auto-shutdown at any time. It's probably crashing with the same root cause as #5341 with workaround that o...
-
01:06 PM
Feature #5373: Advanced option to add separator or group firewall rules in web gui
- Its really not that clever. The separator bar is just a label that is added to the rule display so that you can visua...
-
12:26 PM Feature #5373: Advanced option to add separator or group firewall rules in web gui
- Thank you Steve. Having a group separator will help a lot.
Probably one day (in the future) we can see the rules h... -
11:49 AM
Feature #5373: Advanced option to add separator or group firewall rules in web gui
- Ready for testing
-
11:44 AM
Feature #5373: Advanced option to add separator or group firewall rules in web gui
- Initial functionality is now complete and ready for testing.
Click "+ Separator"
Add some text (or not)
Click th... -
11:05 AM
Bug #5783 (Resolved): IGMP Proxy not working with CARP alias on upstream interface
- Details here:
https://forum.pfsense.org/index.php?topic=105506.0 -
- This looks good now on multiple systems that meet the original problem criteria. Closing it out.
-
07:04 AM Bug #5520: IPsec status seems to hang preventing access to the webgui.
- Jim Thompson wrote:
> Please investigate https://wiki.strongswan.org/issues/1269
>
> May not apply if original su... -
- Pull request #2450 has been merged
01/18/2016
-
- Please investigate https://wiki.strongswan.org/issues/1269
May not apply if original support customer isn't using ... -
09:59 PM Bug #5782 (Duplicate): Update pfsense from 2.2 to 2.6, DNS Forwarder (dnsmasq) auto shutdown at midnight.
- Dear,
After I updated pfsense from 2.2 to 2.6, I recognise that DNS Forwarder (dnsmasq) auto shutdown at midnight... -
- It will be easy to review if you edit the source code at https://github.com/pfsense/pfsense-packages/blob/master/conf...
-
01:01 PM pfSense Packages Bug #5780 (Closed): phpservice.inc - variables between EOF not escaped.
- make a long term short ..
37: - $tmp = <<<EOF
37: + $tmp = '
44: - filename = "/tmp/phpmonitor.pid";
44: + file... -
- I changed it to use "none" instead since off is deprecated. Fixed
-
- works, thanks!
-
- Applied in changeset commit:b9abac57ece83c4baeedfcd470dcab1084f98ae6.
-
- Applied in changeset commit:f8bf3fe860c63b0a4f02093fe15e2874f8e52156.
-
- For RELENG_2_2: https://github.com/pfsense/pfsense/pull/2465
For 2.3 master: https://github.com/pfsense/pfsense/pull... -
- 1) Make an alias, e.g. ZLAN
2) Interfaces->LAN - change the description to ZLAN
A message is displayed "Sorry, an... -
04:57 PM Bug #4513: Change in IP Alias name causes no tables on reboot
- FWIW, I have verified that this is no longer an issue (i.e., it's fixed) in pfSense 2.2.6.
-
03:51 PM
Bug #5781 (Assigned): services_dhcp.php description label lost on multiple fields where configured
-
- The "NTP servers", "TFTP server", "LDAP URI" and "Network booting" labels on services_dhcp.php are no longer shown wh...
-
03:13 PM
Feature #5373 (Feedback): Advanced option to add separator or group firewall rules in web gui
- Here is a prototype version that allows separators to be added to the rule display. Let me know what you think.
It i... -
-
- Thank you for the update Chris.
I hope it is not too late to include my patch for pfSense 2.3 regarding prefixes.php... -
- @Wolf Noble, if you've got some time, please take another look at the current 0.39 package, it should have all points...
-
12:19 PM
Bug #5779 (Resolved): Label dissapears on deleting any row in a repeatable table
- Label is now saved/restored on delete row
-
11:53 AM
Bug #5779 (Resolved): Label dissapears on deleting any row in a repeatable table
- The Javascript that manages add/delete/renumber etc for PHP elements with class="repeatable" trashes the group label ...
-
- Assigning to cmb since he's the nginx guru. Looks like we may need to setup a fastcgi wrapper of sorts, similar to wh...
-
- 1) In some places there are "raw" text strings not wrapped in any gettext() call - so they have no chance to be trans...
-
04:00 AM Bug #4237: Error "macro IPsec not defined" once after firmware upgrade
- Hello to Everyone.
I have the same problem after upgrade to 2.2.6
01-12-16 13:00:25 [ There were error(s) loading... -
01:37 AM
Bug #5441: Unbound config does not bind to CARP IP
- Also upgraded, from 2.2.6 to 2.3BETA from today.
https://forum.pfsense.org/index.php?topic=105451.0
Only one of 4 C...
01/17/2016
-
- Just pulled the update from master and I have confirmed that it is working as expected on iOS Safari. The username f...
-
- I found references stating that autocapitalize="off" is now deprecated and should be changed to autocapitalize="none"...
-
07:09 AM
Bug #5776 (Feedback): pfsense logon from iOS devices (Defaults to uppercase for first letter in username)
-
05:52 AM Bug #5776: pfsense logon from iOS devices (Defaults to uppercase for first letter in username)
- this works on android, don't have iOS to test this on.
https://github.com/pfsense/pfsense/pull/2452
01/16/2016
-
- Applied in changeset commit:e163952f29d1b9bc68731985c14caa3129ce49ce.
-
- With the DNS Resolver enabled and the option on System > General unchecked, 127.0.0.1 should be included in resolv.co...
-
- It would be nice for the login form to default to lowercase for the username. Currently, if you are logging in from ...
-
05:24 PM
Bug #5774 (Resolved): Adding widgets fails to make them appear
-
04:30 PM
Bug #5774 (Feedback): Adding widgets fails to make them appear
- Applied in changeset commit:0cc4b85f9594916a99dc713d413558396a868266.
-
- Add a new widget or delete one and attempt to add it back and nothing shows up.
Looks like it is using some numeri... -
- I converted some of the GUI parts to Bootstrap, it seems broken in other ways, however. It requires CGI support for p...
-
-
- I converted the squidGuard blacklist and log page to Bootstrap and make a few other relevant adjustments. Still could...
-
- Thanks, change works regarding hiding the delete button when a package uses the 'plugin_certificates' function to rep...
-
04:48 AM Bug #5761: D-LINK DUB-E100 USB to Ethernet adapter does not work properly
- I've replicated this topic on freebsd's bugzilla:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=206143
Afte... -
- it works for me. Viscosity prompts for the p12 key after the user credentials, and accepts it as entered in the expor...
01/15/2016
-
- don't think there's an issue here. None of my test or production clients or servers have any problems on latest versi...
-
03:47 PM
Bug #5773 (Not a Bug): OpenVPN Certificate issues
- See: https://forum.pfsense.org/index.php?topic=105341.0
I have verified the GUI and config file systems. This now ... -
- that does work fine. Pushed change to allow this.
Thanks for the report, Olivier! -
- Not seeing an easy way to match up in this circumstance that won't potentially over-match or cause other problems. Ra...
-
- Billy Jones wrote:
> Unfortunately I'm experiencing the same issue still. I should probably bring this up with the ... -
- Unfortunately I'm experiencing the same issue still. I should probably bring this up with the miniupnpd dev and/or MS.
-
- these are added and removed correctly now
-
- nothing other than static routes will ever add alias contents to the routing table. will need much more to go on here...
-
- The input validation check here for VLANs in general (VLAN MTU must be <= parent MTU) works for lagg as well. There s...
-
02:15 PM
Todo #5771: Disable MTU field for vlan with lagg parent
- Change was reverted per Renato.
Another solution will b researched. -
01:45 PM
Todo #5771: Disable MTU field for vlan with lagg parent
- Implemented as requested EXCEPT that I need to know where the user would go to edit the MTU of the parent.
-
01:40 PM
Todo #5771 (Feedback): Disable MTU field for vlan with lagg parent
- Applied in changeset commit:2bbab3a9349fd4d725106280751c0edf8a8baf03.
-
- I've upgraded several different configs with differing packages in the past few days, and all were upgraded correctly.
-
- This is broken in 10-STABLE, now has open bug here:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=206231 -
- I converted the squid monitor page to Bootstrap (others are all XML), will be up for testing shortly.
-
04:55 PM Bug #5476: Does not appear possible to use policy routing for traffic originating from the firewall (self)
- Alright, I'll keep banging away at it. Some screenshots of the outbound NAT setup you're talking about would be imme...
-
- Be sure to account for the necessary outbound NAT in that scenario. The system selects the outbound address according...
-
- I just installed 2.3-BETA (amd64) built on Fri Jan 15 13:30:46 CST 2016 from scratch and set up a test scenario with ...
-
- I converted the Raw Config and Status tabs to Bootstrap, the other config tabs were XML and were already OK.
This ... -
- Converted the status page to Bootstrap, rest of the package was XML and didn't need adjusting. Looks good now. New ve...
-
- Most of the package is XML. I converted the config viewer to Bootstrap, which was the only PHP-based GUI page. Packag...
-
- Works, thanks!
-
12:20 PM
Bug #5772: Services -> DHCPv6 Server bootp additional options add/delete not working
- Applied in changeset commit:b090a0d9f5064184100ad72880ac129eb001ab2c.
-
12:12 PM
Bug #5772 (Feedback): Services -> DHCPv6 Server bootp additional options add/delete not working
- Page was "kind of " working, but required the user to "Save" after each "Add option"
Replaced that with the pfSense/... -
- It's not adding new fields when click in "Add option", instead it is sending user to top of page
-
- Looks good to me, only the status page needed converting and it renders fine here.
-
- Nothing to convert, only .php file was a script and not a GUI component.
-
- Only the status page needed conversion. I pushed an update, once version 1.1 shows up to install it is ready for test...
-
- Pushed an updated version. Once 0.3 shows up for installation it is ready for testing.
-
- Applied in changeset commit:29e6a815c9b9a3b81f7628873e08bd8d8c499bee.
-
- Applied in changeset commit:2cb37fa6c1a5746a55e09186c557ea298865da87.
-
- It appears to work fine now when the SSL certificate validates. When it doesn't, however, a PHP error occurs:
<pre... -
- Applied in changeset commit:b97c7ee5f88658195fc29ce02ea0e9b8e72d4ca6.
-
- Applied in changeset commit:65cce9d728449da1c5243629b25ab3307acfff82.
-
- Works
-
- Doug Dimick wrote:
> Commenting here per https://forum.pfsense.org/index.php?topic=102710.0 in case my issue is rela... -
- Fixed
01/14/2016
-
- config upgrade code added to remove any layer7 configuration, and file a notice where found so users are clearly awar...
-
- not seeing any situation where you wouldn't want secure_mode, we'll leave that enabled with no option to disable unle...
-
- OpenVPN 2.3.9 seems to have fixed this, "write pid file immediately after daemonizing" from their change log. The CAR...
-
03:20 PM
pfSense Packages
Bug #5468 (Closed): iperf service won't shutdown
-
03:19 PM
pfSense Packages
Bug #5685 (Closed): Can't (re)install Asterisk
-
03:19 PM
Bug #5720 (Closed): 4 minor possible bugs - can someone review?
-
03:17 PM
Bug #5753 (Closed): pfSense 2.2.6 - apinger fails to start correctly on boot/reboot. Requires manual start in web GUI.
-
03:17 PM
Bug #5758 (Closed): Problems when changing IKEv1/IKEv2 in IPSec Phase 1
-
03:16 PM
Bug #5767 (Closed): When first enabling DNS Resolver the test of the config fails
-
- Feedback from forum is good: https://forum.pfsense.org/index.php?topic=105236.msg586850#msg586850
-
02:00 PM pfSense Packages Todo #5585: Convert the pfSense package Snort (security/pfSense-pkg-snort) to Bootstrap
- Bill Meeks is spear heading this one, but I am working with him on it as I do Suricata.
-
- miniupnpd was updated to 1.9.20160113, which contains the fix
-
- On interfaces.php, when current interface is a vlan and parent is lagg, disable MTU field and add a message saying al...
-
- Looks good to me. Closing.
-
09:23 AM
Bug #5770 (Feedback): firewall_shaper_queues.php - Text boxes shoult not be editable
- Assigned to JimP for testing.
Please close if OK
-
08:25 AM
Bug #5770 (Resolved): firewall_shaper_queues.php - Text boxes shoult not be editable
- https://forum.pfsense.org/index.php?topic=105294.0
-
- 1. No. Auto-fetching is a bad idea, especially if it stomps existing content. The contents of the remote patch could ...
-
- The system patch package has a (slight) inconsistent treatment which happens invisibly. When the package is installed...
-
-
- Working as expected now. Closing.
01/13/2016
-
- Applied in changeset commit:1548bd353c5439666e9c75cfca2faee938d33dde.
-
- Should be fixed by https://github.com/pfsense/pfsense/pull/2422
-
- The current code in 2.3 tries to generate unbound.test.conf but with various references to "real" files in it like ac...
-
- advanced settings apply to all configs, there isn't something being changed under an individual P2 that affects other...
-
- The settings on that Advanced page apply to all IPsec. And the maxmss settings applies to all VPNs (OpenVPN also).
-
04:53 AM Bug #5765 (Not a Bug): Ipsec, change phase2 under one phase1 reflects in other different phase1
- Hello,
I have two phase1 (a and b for example) configurations under IPsec, each one with their respective phase2.
... -
- a careful search and replace in the config generally suffices for this. It's not something that would be implemented ...
-
02:14 PM
Feature #5768: Complete Change of IP-Range and Addresses
- Its a very dangerous thing to do, but:
Most of pfSense's configuration is stored in the file /cf/conf/config.xml and... -
02:07 PM Feature #5768 (Closed): Complete Change of IP-Range and Addresses
- Hi there,
for several months I have been using pfsense and I consider it to be one of the greatest pieces of softw... -
02:01 PM
Bug #5566 (Resolved): Some of the page's content are not in panels
- Completed
-
- Seems to do the job. Rules look like I expect, pf doesn't complain.
-
11:50 AM
Feature #3887 (Feedback): Add a "No binat" checkbox to 1:1 NAT for exclusions
- Applied in changeset commit:1716852ac3f818dc9fb22f3e4f7eb4301296a3c0.
-
11:44 AM
Feature #3887 (Assigned): Add a "No binat" checkbox to 1:1 NAT for exclusions
- Implemented as requested.
Swinging it over to JimP for testing -
- The rule should look like the current rule but have "no " before the rest of the line. For example source:src/etc/inc...
-
10:25 AM
Feature #3887: Add a "No binat" checkbox to 1:1 NAT for exclusions
- 1-to-1 rules can already be dragged to reorder. I can add a "no binat" (or "exclude") checkbox, save the setting, an...
-
- Works fine here
-
- Applied in changeset commit:471e7c3ac7276568c0fea726d699fb63dd87d3eb.
-
- Here is a quick fix that works to eliminate the bum entry on GIF/GRE: https://gist.github.com/jim-p/a1b92a97e4a9ee7e30fb
-
- Looks like this GIF (and also GRE) case could be fixed by some better testing in source:src/etc/inc/interfaces.inc#L5...
-
- "just hide V4" is a work-around Michael.
We're better than that.
let's make it work right.
[details deleted]
(I l... -
- That's the idea. The interface has no v4 IP so it should have no v4 gateway, yet the system makes a v4 gateway entry ...
-
- in this example isn't monitoring HENETIPV6_TUNNELV6 good enough and just hide V4?
-
08:37 AM
Bug #5766: gateways widget: Incorrect monitoring of v6 over v4 tunnels
- !support.jpg!
-
08:23 AM
Bug #5766 (Resolved): gateways widget: Incorrect monitoring of v6 over v4 tunnels
- http://imgur.com/W9XYyrr
-
- I believe luiz did changes on it recently. Can you please confirm it still happen in 1.0_7
-
- Re-assigning this to Renato.
-
08:57 AM
Bug #5523 (Resolved): Firewall Log Widget - Action icons have no color
- Looks like this was implemented some time ago, so setting to resolved.
-
- assigned for eval
-
- assigned to cmb for eval.
-
- Luiz to eval
01/12/2016
-
- Sorry, it's tun.
I don't see anything in the diffs but I've played with most of the gui options to see if anything... -
- Is that using tun or tap?
The OpenVPN config generation source hasn't changed at all in a month, and some time lo... -
- Using OpenVPN client mode, it throw errors when adding routes.
This worked in 2.3 snapshots until sometime last week... -
- Thanks Pedro, I removed the reference to that obsoleted file.
-
- Chris confirmed via email that this worked fine (aside from hitting #5453 and having other issues from that)
-
- RFC 4106 section 8.2 says:
"This document does not specify the conventions for using AES-GCM for IKE Phase 1 negot... -
- As for the xmlrpcsync, ill try and see if can make that happen 'asynchronously'. So the user does not need to wait fo...
-
- The quote's are not supposed to be part of the text put into the field.. Maybe i should just remove them completely. ...
-
- I entered a custom HTTP string in the Http check version textarea of the Health Checking section of the Edit HAProxy ...
-
- When you click 'apply changes' on a carp setup, it can often take some time for the changes to propagate.
system l... -
- Please use one of our available support resources for assistance, this definitely falls into tech support.
-
- this is "normal" priority until it's proved to be a bug.
It's not clear that you're not asking for 'tech support',... -
05:05 AM Bug #5762 (Not a Bug): IPSec tunnel is up but no traffic
- Good Morning,
we configure ipsec tunnels from one pfsense 2.2.6 platform (responder) and hirschmann eagle one (initi... -
- Works for me too on another box. Closing it out.
-
09:20 AM pfSense Packages Bug #5763: OpenVPN client export extraction failed - Unsupported Method
- work fine, it's ok
-
- Updated the export package to 1.3.6, which now bundled OpenVPN 2.3.10, and I switched to a different SFX module which...
-
- Hmm, I'm seeing this now also, but the archive doesn't use rar. It uses 7z format, LZMA2 BCJ method. No rar. That can...
-
- The file pfSenselabs-udp-1194-install.exe generated when click any options of the "OpenVPN Clients" session of the sc...
-
08:51 AM
Bug #5752: Problem with loading firewall rules when using pfBlocker
- pfBlockerNG developer is investigating
-
08:50 AM
Bug #5759 (Resolved): Success save message is not always in success color/style
-
- Braden McGrath wrote:
> (Is it somehow documented what version you pull when you build an official pfSense release? ... -
- Would it be possible to log what release of miniupnpd is in use when it fires up? I seem to remember seeing a versio...
-
04:31 AM Bug #4854: OpenVPN bound to gateway group using CARP IP doesn't start with CARP master status
- Joseph Huber wrote:
> Maybe the same problem with OpenVPN Client Connections:
> We have a Master/Backup CARP setup ... -
- I've split the above PR into 9 separate PRs to avoid merge conflicts.
It turns out that every call to ip2long32(),...
01/11/2016
-
09:00 PM
Bug #5755 (Resolved): CP does not display upload image refrrenced in HTML
- Fixed by CMB and tested OK
-
- carp check also needs some changes.. will fix that to..
-
- Looks like the 'space' character behind the first ENDOFF terminater made it go wrong..
After removing that it seems ... -
- The init script /usr/local/etc/rc.d/haproxy.sh breaks, as the ENDOFF terminator gets greedy. Change the terminators t...
-
05:36 PM Bug #5753: pfSense 2.2.6 - apinger fails to start correctly on boot/reboot. Requires manual start in web GUI.
- I solved by adding my modem on a virtual interface as a static IP.
Not sure why this helps, but it has. Tested wi... -
- Guessing this is probably the same root cause as #4587. If it's not, it's probably fixed in 2.3 as part of removing a...
-
- I've just done a fresh install of pfsense 2.2.6, and the issue came back after installing a dynamic dns update servic...
-
- what's filterdns logging in the resolver log?
-
- those who have the original issue here, a report back on whether it still occurs with 2.3 would be appreciated.
M... -
04:02 AM Bug #1943: PPPoE won't reconnect after link loss when using vr(4) NICs on certain ISPs only
- I am also experiencing this issue, luckily enough our connection is usually stable but if it is interrupted it reconn...
-
- You'll need to replicate on FreeBSD and report there, we don't do anything with drivers for hardware we don't sell.
-
- Using this particular adapter it's impossible to reach webpage, but ping works from and to router.
1a02 DUB-E100 ... -
- Jeremy's situation is confirmed working now. Every other circumstance still looks good too.
-
02:36 PM
Bug #5760 (Resolved): Incorrect use of HTML array names
-
02:00 PM
Bug #5760: Incorrect use of HTML array names
- Applied in changeset commit:e9ef9ba0d14ebd9cc00d1989da2bb82cc33d4184.
-
01:59 PM
Bug #5760 (Feedback): Incorrect use of HTML array names
- Set to Feedback->Renato for confirmation
-
01:48 PM
Bug #5760: Incorrect use of HTML array names
- https://github.com/pfsense/pfsense/blob/master/src/usr/local/www/interfaces_bridge_edit.php#L434
https://github.com/... -
01:48 PM
Bug #5760 (Resolved): Incorrect use of HTML array names
- These files have '[]' after the element name, which is not required since it is added automatically by the Bootstrap ...
-
- Yep, that's good.
I guess you do not want to add "features" to 2.2.* any more, so you could close https://github.com... -
10:35 AM
Feature #5729 (Resolved): Add description column to DHCP leases list
-
- PR https://github.com/pfsense/pfsense/pull/2401
-
08:04 AM
Bug #5759: Success save message is not always in success color/style
- Thanks Phil. The ability to set the style of message boxes was introduced long after the project was started, so it i...
-
- After saving on the webGUI (and applying if necessary) the user often gets a success message like:
"The changes have... -
10:07 AM
Bug #5758 (Feedback): Problems when changing IKEv1/IKEv2 in IPSec Phase 1
- AES-GCM was removed deliberately. RFC 4106 does not specify the use of AES-GCM for phase 1
We are unable to reprod... -
05:40 AM Bug #5758 (Closed): Problems when changing IKEv1/IKEv2 in IPSec Phase 1
- When adding or editing an IPSec Phase 1 there are some errors in the UI:
* *Negotiation Mode* should be removed on... -
08:56 AM
Bug #5752 (Assigned): Problem with loading firewall rules when using pfBlocker
- Referring this to the pfBlockerNG developer for a second opinion
-
- I can confirm I'm not having any issues with accessing interface settings, only when trying to access rules page and ...
-
- No it`s not.
I can confirm same on:
2.3-BETA (amd64) built on Sat Jan 09 00:47:27 CST 2016
All pages are fine fo... -
08:54 AM
Bug #5757 (Closed): Interface settings in 2.3 is extremely slow
- Seems this is not a duplicate of 5752 after all.
This issue appears to be caused by an interaction between FireFox... -
- Seems to be fine, though it will likely need a revisit once the RRD changes are done.
-
- Works fine, at least as well as the old one did.
-
- Added a while back, tested OK for me on Windows and Mac versions of Viscosity.
-
-
- Bind setting works right even with that old tag in place now. Closing.
01/10/2016
-
- reassigned due to non-action.
-
- Bump for closure.
-
- 11 months now, I don't hear the complaints. Chris opened this. i will close it at 12 months if he doesn't re-engage.
-
- Bump for feedback.
-
- Bump for Renato to re-engage on this.
-
- assigned for feedback evaluation and closure.
-
- Bump for re-eval.
-
- Bump. assigned to CMB for eval and possible closure.
-
- Bump to see if linux testing revealed anything.
-
- Assigned to Steve, though if Phil wants to attempt a fix, that's fine.
-
- That is the suggestion.
The hardware we support gets this kind of test coverage.
DIY people are left to impleme... -
- seems easy enough to work around.
-
- Duplicated by #5757
Given #5757, I don't think the problem is specific to pfBlocker.
-
- Currently running latest the pfSense 2.3, version 2.3.b.20160109.1400 and having slow load times of firewall rules pa...
-
- Duplicate of #5752. Closing this one in favor of that.
-
- Any change on Interface settings in 2.3 is extremely slow (like 5 seconds to respond initial keystrokes).
Tested w... -
08:18 PM
Bug #5755 (Resolved): CP does not display upload image refrrenced in HTML
- Uploading simple HTML such as this, with an embedded image fails to display the image...
-
- contents of system log: general
Jan 10 23:16:16 php-fpm[62391]: /index.php: Successful login for user 'admin' fro... -
- I'm not sure what is causing this issue, but it is causing me problems if my pfSense box auto-updates and reboots and...
-
01:19 PM Bug #5724: Phase1 checkboxes on vpn_ipsec.php cannot be checked by clicking on them & missing row_toggle.js javascript
- missing logs are here:
nginx: 2016/01/10 19:22:03 [error] 84391#0: *91 open() "/usr/local/www/javascript/row_toggle... -
- Everything seems to work ok, but i'm still observing similar messages in system logs:
It happens every time /vpn_ips... -
- It is on pfSense 2.2.6
The page observed is: https://172.16.0.1/vpn_openvpn_export.php
The package is: OpenVP... -
08:55 AM pfSense Packages Bug #5751 (New): SquidGuard target categories not saved when long "Domain List" is provided
- I created a new entry in the 'Target categories' tab and tried to copy/paste the testfile which is appended into the ...
01/09/2016
-
- Thanks for these comments.
The linebreaks in the 'Global Advanced pass thru' seem to be caused by the css added by... -
- It seems like FireFox handles nowrap differently from chrome.. Its nolonger possible to add a second line of text in ...
-
08:47 AM Bug #5750 (Resolved): unbound.inc should not add 127.0.0.0/8 in forward mode
- Introduced in the commit [1], the local DNS servers are appended to unbound forward-zone. The function get_dns_server...
-
08:24 AM
pfSense Packages
Bug #5749: OpenVPN Export Certs with password, password doesn't open .pk12 container.
- Would you provide some more information please?
Affected pfSense version
GUI page on which the issue is observed
... -
- When I export OpenVPN certs in a .pk12 container and try to set a password, that password doesn't open the private ke...
-
08:15 AM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- I shot-gunned this to save time, but I believe the critical fix was that unlike on other pages where the "Show advanc...
-
08:11 AM
Bug #5747 (Resolved): interfaces.php - Hitting apply on interface messes DHCPv6 config
-
- Chris Buechler wrote:
> There are instances where people want to disable IPsec to switch to a diff VPN or private WA... -
- There are instances where people want to disable IPsec to switch to a diff VPN or private WAN but leave its config in...
-
- this was actually fixed in 2.2.4, and still works in 2.3.
-
- I think we may just have to instruct users with hardware requiring the acpi_throttle and p4tcc to change those accord...
-
- works
-
- looking at this as part of PR 1638
-
- complete, works
-
-
- Thanks, I thought maybe my test setup was just being weird in never leaving "tentative" state, guessing yours is work...
-
- Hi Chris,
This is what I get:
[2.3-BETA][admin@carlos.u-city.net]/root: ifconfig wan_stf
wan_stf: flags=4001<U...
01/08/2016
-
- Will: what does your ifconfig output show for the wan_stf interface?
-
- on a version that new it's not related to #5711. this is already something I was planning on going back to check for ...
-
- Hi guys,
I'm running 2.3 built on Fri Jan 08 15:32:00.
I use Charter's 6RD service which works great but I hav... -
- works
-
- updated
-
- this looks to be correct in all cases now.
-
- See the issue after working on Jeremy's system. It's actually never worked correctly if the last enabled DHCP server ...
-
04:01 PM Bug #5603: two issues with dynamic dns regsitration from dhcp
- Ya, even after disabling ddns updates and re-enabling, I'm still not seeing the "key" statements for the zone, or the...
-
- As of 2.3 at least sysctl net.fibs report 4 fibs defined, and setfib is included in the distribution.
[2.3-BETA][roo... -
- duplicate of #4796
-
02:16 PM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- Hmm. Wonder why adv_dhcp6_config_file_override is being set?
Should move back to the forum https://forum.pfsense.o... -
- Posted iface config as well.
I guess you only need opt2 which is my PPPoE. -
- Commenting ONLY line 18 results in same non working conf file being generated.
-
02:07 PM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- Thanks David. Yes, it would be interesting to see that config
-
- NOT WORKING
<opt2>
<descr><![CDATA[PPPoE]]></descr>
<if>pppoe0</if>
<spoofmac/>
<enable/>
<ipa... -
02:05 PM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- Wow.
That would imply that this 'apply' code block is being executed on save, not just on apply. That is REALLY ha... -
02:05 PM Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- Steve B - I'm fairly certain that it's the call to interface_configure() that will set in motion the generation of th...
-
- Did it like this:
if ($_POST['apply']) {
unset($input_errors);
if (!is_subsystem_dirty('interfaces')) {
$inpu... -
01:48 PM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- OK. Then in this code:...
-
- Looking at the definition of DHCP6_Config_File_Advanced() in /etc/inc/interfaces.inc, it's difficult to understand ho...
-
- Yeah sure :)
-
01:39 PM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- OK. Going to be a tough one to find until we can reproduce it.
Would you be comfortable editing the interfaces.php... -
- Hmmm.
If I specify my own config file then /var/etc/dhcp6c_opt2.conf looks like:
interface pppoe0 {
send ia-pd ... -
- Hardware.
I did upgrade from 2.2.6 via webgui with latest image. -
01:22 PM
Bug #5747: interfaces.php - Hitting apply on interface messes DHCPv6 config
- What type of system are you running on? Hardware? VMWare ???
-
- I`ve just tested it.
For me it creates "/var/etc/dhcp6c_opt2.conf" with the following content:
interface pppoe0 {... -
- I also tried and failed to replicate it. Though when I press Save, nothing is written out. It only writes when I clic...
-
12:54 PM
Bug #5747 (Feedback): interfaces.php - Hitting apply on interface messes DHCPv6 config
- Greg,
I am having no luck reproducing this. Perhaps you could give me some more guidance?
On real hardware I se... -
12:04 PM
Bug #5747 (Assigned): interfaces.php - Hitting apply on interface messes DHCPv6 config
-
- See screenshots.
When you edit iface to use DHCPv6 IPv6 with all those preferences selected, and when you press sa... -
- This is one of the issues already fixed in #4858 (similar to #5464).
-
- Probably another side-effect of #4858
-
- Yep, it definitely works.
-
11:24 AM
Bug #5745 (Resolved): services_captiveportal.php - Attempting to save portal page, error page, or logout page contents silently fails
- Reported as fixed by OP
-
08:50 AM
Bug #5745: services_captiveportal.php - Attempting to save portal page, error page, or logout page contents silently fails
- Fixed this issue by add multipart encoding to the form.
While testing I also fixed the display of radius protocol ra... -
08:50 AM
Bug #5745 (Feedback): services_captiveportal.php - Attempting to save portal page, error page, or logout page contents silently fails
- Applied in changeset commit:46af3068cee4618a7e07af82fe578afc6e8604b7.
-
- Attempt to browse for and save an .html file for the "Portal Page Contents", "Auth error page contents", or "Logout p...
-
- Fix works, thanks!
-
- Applied in changeset commit:ac2239116431422e653121f7318f99a173338df2.
-
- When using console option 11 to restart nginx it apparently does not stop the captive portal nginx process(es) so it ...
-
- Still broken on 2.2.6.
BTs from 2.2.6:... -
- Still a problem in 2.2.6 though the backtrace is slightly different:
db:0:kdb.enter.default> bt
Tracing pid 12 tid ... -
- Leave it as is for now, after 2.3 we are going to move changes to FreeBSD-src repo instead of overwriting files direc...
-
- Applied in changeset commit:cf68834439b2c1540b6f7d576a863e7e35cfaac9.
-
- Luiz, can you check this when you are working on #4858? I believe both tickets are related
01/07/2016
-
- We didn't get new enough to catch the change in question. That thread came to resolution on December 19, with this co...
-
- Still no ports opened by Xbox One or Windows 10. I verified the binary was updated.
-
- Can you try new miniupnpd package 1.9.20151212?
-
09:31 AM
Bug #5730: Xbox One and Windows 10 no longer open ports via UPNP
- I've ran into the same issue. I have several Xbox One's in my network and they are no longer opening ports. I also en...
-
- Jeremy fixed part of this here.
https://github.com/pfsense/pfsense/commit/e8da0bcd6b62cc3691775337e96440ae41993780
... -
- no problem
-
- ok my bad sorry about that
-
- You're looking at the reporting thread, which isn't used and is now always set to 0 by design.
-
- The alert_interval in that example is 1000ms, not 0. It changes fine for me. At the default 1000, it's correctly runn...
-
- The alert_interval there is 1000ms
report_interval is 0ms
I just changed Alert Interval to 2000ms on my system and ... -
- broke with change 1.1-1.2 on 12-29-15
Dec 29 19:33:57 dpinger send_interval 1000ms loss_interval 10000ms time_per... -
- Jan 7 23:07:24 dpinger send_interval 1000ms loss_interval 7500ms time_period 30000ms report_interval 0ms alert_inter...
-
- This looks to work fine. It's configured correctly, and the appropriate PCP mark is on the traffic.
Chris or anyo... -
- should be fixed, leaving for additional confirmation.
-
- fixed
-
- looks good
-
- looks good
-
02:36 PM
Bug #5722 (Resolved): services_dhcp pool and static mapping validations
-
02:35 PM
Bug #5723 (Resolved): CSRF error on dashboard: Refused to set unsafe header "Content-length"
-
-
- Applied in changeset commit:06dea9aa32844d18d626854c520bab3996aeb904.
-
- Affects latest 2.3-BETA (amd64)
-
- There is a typo in vpn_openvpn_client.php : This is the IPv4 virtual network used for private communications between ...
-
-
12:16 PM Bug #5737: Traffic Graph Table and Graph Inverted Values
- I can't seem to close this issue - if you can then feel free to do so!
-
- Fair enough! I guess that sort of, kind of makes sense :)
-
- That has been merged. As far as I can see this is all working fine now. Someone else independent had better give it a...
-
- One last (I hope) one - https://github.com/pfsense/pfsense/pull/2377 - when the last updated date is unknown, then di...
-
09:28 AM
Bug #5742 (Resolved): Diag Tables form issues
- Merged that. Thanks Phil.
-
- Looks good.
After clearing a table, the GUI redisplays the now-gone entries from the table. The $entries array still... -
08:40 AM
Bug #5742: Diag Tables form issues
- Applied in changeset commit:e6f5c464143eb1da3bd55d4c9c6c6037af03cce4.
-
08:34 AM
Bug #5742 (Feedback): Diag Tables form issues
- Page has been re-written to:
# Combine the two forms into one so that it submits properly
# Auto-submit the form ... -
07:43 AM
Bug #5742 (Assigned): Diag Tables form issues
-
- I made PR https://github.com/pfsense/pfsense/pull/2368 to change "deleteall" to "clearall" - that seems any easy, goo...
-
- 1) Select a (not bogons) table that has some data in it and press Show.
Press "Clear Data" in the "Table Data" secti... -
08:39 AM
Bug #5738 (Resolved): IPSec widget does not display mobile connections
-
- This is apparently because of a defaults change in FreeBSD 10.2 and newer. Change the following two lines in /boot/de...
01/06/2016
-
- I think this may be attributable to a regression in dnsmasq 2.75. There is a recent dnsmasq 2.76test build available ...
-
11:21 PM Bug #5341: dnsmasq 2.75 exits with signal 11
- I forgot to mention that I'm updating my pfsense box within a few days of new releases, running only the stable versi...
-
- Just chiming in to report the same problem overhere.
Dec 17 23:00:38 pfsense kernel: pid 27577 (dnsmasq), uid 6553... -
- Tiago: could you please get a CLA on file, update for 2.3 and re-submit a pull request? More specifics added in comme...
-
- this should be safe to have always enabled. I committed a change to always have that set to yes. If that ends up bein...
-
- the issues here are attributable to issues in apinger, which has been replaced in 2.3 with dpinger, which doesn't hav...
-
10:02 PM Feature #4597: Allow gateway monitoring via VIP
- Yes, /var/etc/apinger.conf has a srcip of a Private IP when using using CARP with one WAN IP. There isn't a way to sp...
-
- this was added in 2.3.
-
- works
-
- fixed
-
- fixed
-
- I don't think there are any remaining issues here.
-
- the workaround works fine
-
- Workaround seems to work fine while FreeBSD ports collection doesn't have a proper/better solution
-
- works
-
- this is all finished and works
-
-
- any odd of this making 2.3 seems other users of miniupnpd claim it works haven't studied the config differences
-
05:24 PM
Bug #5741 (Closed): IPs from Random Aliases Lists Are Added to Routes Table
- This has happened to me a couple times.
For some reason IPs (and ranges) are added to my routes table without my c... -
05:20 PM
Bug #5740 (Not a Bug): Alias Hostnames Are Not Being Updated
- This used to work great, but recently even after days of waiting, new hostnames added to my alias list are not resolv...
-
03:15 PM Bug #5739 (Resolved): powerd fails on some hardware with "no cpufreq(4) support -- aborting"
- PowerD does not seem to run in 2.3 beta. No status on the dashboard, and there is an error during boot or when changi...
-
01:50 PM
Bug #5723: CSRF error on dashboard: Refused to set unsafe header "Content-length"
- Applied in changeset commit:311e4ad5ea15f8303205b31a2bc4afc868ee9441.
-
01:45 PM
Bug #5723 (Feedback): CSRF error on dashboard: Refused to set unsafe header "Content-length"
- Code that sets header length commented out in csrf-magic.js
Error message no longer appears on the browser console, ... -
- lighttpd is out of the game, it's nginx era now
-
- I pushed a fix for #1 and #2. #3 and #4 are covered by 5722
-
- I did ~10 upgrades from 2.2.x to 2.3 with different set of packages installed and couldn't reproduce it. Probably all...
-
- Push it to next version so we can do it right, removing all static files and using packages provided from FreeBSD-ports
-
09:00 AM
Bug #5738 (Feedback): IPSec widget does not display mobile connections
- Applied in changeset commit:245eb71fb230d0677644b72d6b087e21e73bec33.
-
08:55 AM
Bug #5738 (Resolved): IPSec widget does not display mobile connections
- See: https://forum.pfsense.org/index.php?topic=104898.0
-
06:22 AM
Bug #5633 (Resolved): system_certmanager.php - Cannot import certificate
-
03:06 AM Bug #5633: system_certmanager.php - Cannot import certificate
- Hi Steve,
Indeed, that change did the trick.
Now everything is OK. -
- I've imported the changes, dhcp6-20080615_5 is the version with fixes
-
- Settings made to the 'Global Advanced pass thru' textarea box in haproxy_global.php are at least *DISPLAYED* without ...
-
- Should the'View more information' link for this package presented on pkg_mgr_installed.php point to https://doc.pfse...
-
- Note: CGN space is 100.64.0.0/10 = 100.64.0.0 to 100.127.255.255
Those addresses cannot be routed to on the public...
01/05/2016
-
- The In-Out on the graph is with-respect-to the pfSense interface, e.g. on LAN, In is traffic coming into pfSense from...
-
- The traffic graph and the table seem to use opposite values for In/Out. Bit odd.
I'm using a tiered outbound gatew... -
10:14 PM
Feature #3029: DHCPv6 Server/RA page should list interfaces that are configured to track DHCP-PD
- That is great to hear. Thank you. I'll keep an eye out.
-
08:21 PM
Feature #3029: DHCPv6 Server/RA page should list interfaces that are configured to track DHCP-PD
- Don, in the forums one of the developers has said that the ability to adjust DHCPv6 and RA settings for interfaces us...
-
08:03 PM
Feature #4322: Add Google Domains DDNS
- I see Google Domains as a DDNS option in the latest 2.3 beta snapshot... I'm not in a position to try it at the momen...
-
06:21 PM Feature #4322: Add Google Domains DDNS
- https://redmine.pfsense.org/projects/pfsense/repository/revisions/6c92b37851b4f23c82ce6e7f1094b9db1adc4b44
Looks l... -
- Incorrect info. The API call does take the custom username/pw and not your account info.
-
- An issue I see with those instructions on custom dns entries is that it requires your google domains account credenti...
-
06:10 PM
Bug #5633: system_certmanager.php - Cannot import certificate
- Applied in changeset commit:b7eb0ead89d530123147b30e78545316e59adbb9.
-
06:01 PM
Bug #5633: system_certmanager.php - Cannot import certificate
- Testing this with Firefox, I found that when following your instructions (thank you for that) I got a pop-up message ...
-
05:32 PM
Bug #5633 (Feedback): system_certmanager.php - Cannot import certificate
-
05:18 PM
Bug #5633 (Assigned): system_certmanager.php - Cannot import certificate
-
04:57 PM
Bug #5633: system_certmanager.php - Cannot import certificate
- Thanks for the detective work. I'll take a look at this later this week. There is a possibility that it is a characte...
-
- OK... After making some tests, I can now reliably replicate the issue...
The problem is when the first CA's name i... -
- Hello and Happy New Year!
@Phillip Davis: I didn't generate any of the certificates through pfSense interface. All... -
- You aren't getting a public IP assigned (100.78 is CGN space), so by design, the public IP used for Internet access i...
-
- fixed, thanks!
-
- works in all my testing too. Thanks David!
-
- thanks for all the hard work and your continued support, David.
-
- Following the merge of the pull request in https://github.com/pfsense/pfsense/commit/bba669d9cbe52bd84e02f749df0fd83a...
-
01:21 PM Bug #4237: Error "macro IPsec not defined" once after firmware upgrade
- I have the same issue and it seems it is breaking the IPSec tunnels stability. I upgraded from 2.1 to 2.2.6.
*php... -
- I upgraded to 2.2.6 this morning, but I still see the same issue: ipsec tunnels hanging relatively frequently (severa...
-
- Merged now, thanks!
-
05:27 AM pfSense Packages Bug #5736 (Closed): Squid did not authorize user with Captive Portal
- I have 2.2.6 version of PFSense.
Installed SQuid3 with authentication via Captive Portal.
CP authorize users throug... -
- Pull request has been merged
-
05:21 AM Feature #5735 (New): Automaticaly add DHCP leases to alias list or make it readable in selected fields
- Hi
Last week I had a bigger Setup to deploy with some static DHCP Leases and a few Port forwarding's. I Just want to... -
04:34 AM Bug #5734 (Resolved): sync net/dhcp6 with upstream for bug fixes
- Sync up these bug fixes from the upstream FreeBSD net/dhcp6 port for the WIDE DHCPv6 client..
http://article.gmane... -
- This all looks good.
I just did an upgrade from the webGUI and all was good. I even had one of the downloads time ou...
01/04/2016
-
09:04 PM Feature #3029: DHCPv6 Server/RA page should list interfaces that are configured to track DHCP-PD
- @Don, I also have ran into the same stumbling block as you. Every comcast customer using pfsense is also thinking th...
-
08:58 PM
Feature #3029: DHCPv6 Server/RA page should list interfaces that are configured to track DHCP-PD
- Any movement on this at all? I have yet to find a easy way to use my own DNS server internally with a prefix provided...
-
- ok thanks, seems i missed those file references, i changed the javascript folder, but forgot to update this file agai...
-
- Build errored:
install -m 0644 /usr/ports/net/pfSense-pkg-haproxy-devel/files/usr/local/www/javascript/haproxy_getu... -
- @Jim P, are you sure the build properly got started or perhaps there was some error? 3 hours after commit the package...
-
- Sqee!
I'll wire up my config to this today and see how it plays out! Thanks a bunch! -
- I merged the pull request, rebuild should happen automatically shortly.
-
- First bootstrapped version of haproxy-devel 0.36 should be available in a few days..
Pullrequest is send, https://gi... -
01:11 PM
Bug #5733 (Resolved): firewall_shaper_vinterface.php: Unable to add queue
-
10:40 AM
Bug #5733: firewall_shaper_vinterface.php: Unable to add queue
- Applied in changeset commit:bbb5d7a5b6f9063f4bc1164cf0cb4e0f0a32c794.
-
10:30 AM
Bug #5733 (Feedback): firewall_shaper_vinterface.php: Unable to add queue
- Looks like the class was copied from another, but the bandwidth stuff (not needed in dnqueue_class) was not removed.
... -
10:28 AM
Bug #5733 (Resolved): firewall_shaper_vinterface.php: Unable to add queue
- https://forum.pfsense.org/index.php?topic=104784.0
-
01:00 PM
Bug #5724 (Resolved): Phase1 checkboxes on vpn_ipsec.php cannot be checked by clicking on them & missing row_toggle.js javascript
-
- Confirmed fixed, thanks.
-
08:02 AM
Bug #5693 (Resolved): Hide/Mask stored passwords when presenting GUI forms
-
08:01 AM
Bug #5725 (Resolved): Form_Textarea->setNoWrap() does not give expected result, and sets invalid property value wrap=none
-
08:01 AM
Bug #5725: Form_Textarea->setNoWrap() does not give expected result, and sets invalid property value wrap=none
- I don't see where this method is being used by anyone, but I have corrected it just in case :)
Thanks -
07:10 AM
Bug #5725 (Assigned): Form_Textarea->setNoWrap() does not give expected result, and sets invalid property value wrap=none
-
07:54 AM
pfSense Packages
Bug #5732 (Closed): Qagga: Different output in ospfd.conf based on order of interfaces.
- if last interface in ospfd.conf defined as (note the area 0.0.0.0 authentication):
interface ovpns10
ip ospf au... -
07:09 AM
Bug #5731 (Feedback): Error when settings various system log settings from factory default config
- Merged as requested.
Thanks.
01/03/2016
-
- Forum: https://forum.pfsense.org/index.php?topic=104762.0
PR: https://github.com/pfsense/pfsense/pull/2350 -
- Start with the factory default config. Go to System Logs, Firewall. Try to put some settings in the Manage Firewall L...
-
- That is easy to do if we reuse the Start and End columns to display the description in the static mapping case.
And ... -
- I messed up a topic, It should say "Add description column to DHCP leases list". Don't know how to rename it.
-
- Is it possible to add "description" column on DHCP leases page? The description would "pull" information from DHCP St...
-
- Steve, 2343 still looks open and I see no commit to master.
-
03:47 PM
Bug #5722 (Feedback): services_dhcp pool and static mapping validations
- Merged in master
Thanks -
- With the current version of miniupnpd included with the latest 2.3 snapshots, Xbox One and Windows 10 (I don't have a...
-
03:42 PM
Bug #5728 (Feedback): Firewall Schedule Edit the Delete row button does nothing
- Merged
-
- PR https://github.com/pfsense/pfsense/pull/2348
-
- Reported in forum https://forum.pfsense.org/index.php?topic=104761.0
-
- TFTP package does not seem to have been converted yet fro 2.3 - so that is easy!
-
- Those things happen when no interface is selected or there are no files yet in /tftpboot folder.
For 2.2.* it should...
01/02/2016
-
08:47 PM pfSense Packages Bug #5727 (Resolved): tftp service - errors when stopping service
- 2.2.6-RELEASE (i386)
built on Mon Dec 21 14:50:36 CST 2015
FreeBSD 10.1-RELEASE-p25
trying to stop tftp / remove... -
08:33 PM Bug #5726 (Not a Bug): Dyndns updated with wrong IP (PPPoE and transparent ISP proxy)
- running 2.2.3-RELEASE (amd64) Jun 23 16:37:42 CDT 2015 .
WAN is a PPPoE. (direct ethernet into pfsense box) DynDNS s... -
08:10 PM
Bug #5491: Updater notification correction
- Unfortunately the GUI does not currently have a way to know whether a reboot was scheduled and so must assume it was....
-
- "Rebooting Page will automatically reload in 90 seconds."
That message is nice with the countdown and automatic retr... -
07:46 PM
Bug #5725: Form_Textarea->setNoWrap() does not give expected result, and sets invalid property value wrap=none
- Thanks. I'll test that solution shortly. 'wrap="none" had been reported as working, but I like this better.
-
- Adding css style "white-space: nowrap;" seems to work.
-
06:32 PM
Bug #5725: Form_Textarea->setNoWrap() does not give expected result, and sets invalid property value wrap=none
- What solution do you suggest?
-
- Form_Textarea->setNoWrap() does not give expected result, and sets invalid property value wrap=none
The attribute wr... -
01:10 PM
Bug #5724: Phase1 checkboxes on vpn_ipsec.php cannot be checked by clicking on them & missing row_toggle.js javascript
- Applied in changeset commit:5ab32eac0795a18551b96ceb2de9e95ad04b1661.
-
01:00 PM
Bug #5724 (Feedback): Phase1 checkboxes on vpn_ipsec.php cannot be checked by clicking on them & missing row_toggle.js javascript
- fr_toggle() had been added to both the row and the cell causing it to toggle twice, and so appear not to toggle at all.
-
- The missing /javascript/ folder i noticed mostly because of haproxy package that also placed a javascript file there,...
-
12:31 PM
Bug #5724: Phase1 checkboxes on vpn_ipsec.php cannot be checked by clicking on them & missing row_toggle.js javascript
- Yes, it is supposed to delete the old javascript folder. Nothing in there should be required by 2.3.x.
fr_toggle() an... -
- on Chrome Phase1 checkboxes on vpn_ipsec.php cannot be checked by clicking on them & missing row_toggle.js javascript...
-
- Couldn't find the other report (i did search for it.). So just for sake of registration i put it here. And as the bro...
-
12:37 PM
Bug #5723: CSRF error on dashboard: Refused to set unsafe header "Content-length"
- This is a harmless warning that has been reported already. We may address it at a later date, but for now just ignore...
-
- While viewing the dashboard on pfSense in Chrome the error below is logged to the console:
Probably other places to....
01/01/2016
-
- PR https://github.com/pfsense/pfsense/pull/2343 for master to fix the same 4 items.
-
- PR https://github.com/pfsense/pfsense/pull/2342 for RELENG_2_2
I tested in 2.2.6 and found that all these problems a... -
- This is part of https://redmine.pfsense.org/issues/5720 items 3 and 4 plus other validation issues that I found.
1... -
- Items 3 and 4 - yes you are correct and I checked and found a bunch of validation things there. I raised issue https:...
-
- (note, Phil Davis has looked into items 3 and 4, see https://redmine.pfsense.org/issues/5722 )
12/31/2015
-
-
02:55 PM Bug #5718: Port forward NAT doesn't work when using a gateway outside interface subnet
- I've found the cause.
VMware Workstation network drivers don't like this kind of configuration and it only "works"... -
- 2.3 is still on FreeRADIUS 2.2.8 as well because it is tracking the FreeBSD quarterly ports tree. That will be cycled...
-
- Closing this since it's safer to just not auto-apply in this case. We'll add notes to docs/upgrade guide if necessary.
-
- Sorry but for a try with v2.3 is no time. This is Prod environment. The changes in v2.3 are deeper and i do not have ...
-
- Link speeds appear to be OK, but somehow pf doesn't see that it's enough bandwidth. The syntax itself looks OK. Will ...
-
- I have compared the queue definitions in /tmp/rules.debug from v2.2.5 and v2.2.6. The files are identical....
-
- Are the queue definitions in /tmp/rules.debug identical on 2.2.6?
"bandwidth for qInternet higher than interface" ... -
- After the upgrade to 2.2.6-RELEASE is the error back.
_Dec 31 18:00:54 php-fpm (65802): /rc.filter_configure_sy... -
- Do the rules load OK after the reboot has completed? Try from Status > Filter Reload, and from the shell with "pfctl ...
-
- After the Upgrade from 2.2.5-RELEASE (amd64) to 2.2.6-RELEASE I get the following when I reboot my box.
_
There we... -
12:51 PM Bug #5341: dnsmasq 2.75 exits with signal 11
- It happended again yesterday.
Same log entry. -
- works
-
07:21 AM
pfSense Packages
Bug #5712 (Resolved): System Patches package: system_patches_edit.php - Patch contents is cleared when error happens
-
07:17 AM
Bug #5714 (Resolved): Number of dashboard columns lost on 2.2 -> 2.3 upgrade
-
- _(Also noted as possible issues on Github, PR #2340)_
In looking at redmine #5702 / PR #2340, I found 4 minor poss...
12/30/2015
-
- Had a go at this, see PR https://github.com/pfsense/pfsense/pull/2340
-
- duplicate of #5714, closing this one since the commit was on that one.
-
07:15 AM
Bug #5630 (Feedback): wide screen option defaults to 2 after upgrade
-
- works
-
- probably don't need to do anything with this one because of #5719
-
- Hitting a rare crash in lighttpd somehow, details are sketchy yet. System is idle for a while, trying to hit the GUI ...
-
- the web GUI part is complete in https://github.com/cbuechler/pfsense but at the moment that leaves captive portal bro...
-
- Time to replace lighttpd with nginx.
-
- IE 8 is otherwise fundamentally broken in that case. IE 8's end of support is 2 weeks away, you shouldn't be using it...
-
- Thanks for the quick reply.
Compatibility mode is disabled on the screenshots above.
If I enable it, things wil... -
- that's what happens when you have compatibility mode enabled in IE, disable it.
-
- Hello,
webConfiguration interface is broken on IE 8:
https://imgur.com/a/NQucx
Might be related with Bug #5559... -
05:29 PM pfSense Packages Bug #4301: arpwatch not sending email reports on 2.2
- Any further update on this issue?
-
04:30 PM pfSense Packages Feature #5434: Let's Encrypt pfSense support
- Hi there, pfSense user here, don't really know much about the packaging and stuff. I just wanted to point out that us...
-
- Forgot to mention the version I tested with is: 2.3-ALPHA (amd64) built on Wed Dec 30 04:22:05 CST 2015
-
- Hello,
Following feature #972 implementation, automatic outbound NAT works even when using a gateway outside inter... -
02:50 PM
Bug #5717: services_dhcpv6_relay.php: Does not save server list correctly
- Applied in changeset commit:8dccfb20643cfda6b55429177410e6c66fcf0bbd.
-
02:37 PM
Bug #5717 (Feedback): services_dhcpv6_relay.php: Does not save server list correctly
- Both files corrected by fixing $_POST action and removing unneeded 'yes' from checkbox definition.
-
02:35 PM
Bug #5717 (Resolved): services_dhcpv6_relay.php: Does not save server list correctly
- Server list not saved correctly
"Append circuit ID and agent ID to requests" not saved correctly
Same problems in... -
12:57 PM pfSense Packages Bug #5318: Upgrade FreeRadius to 2.2.9
- Hi, i'm think is not a fix, because TLSv1.2 is required by android 6 & iOS 9.2
Thanks. -
11:24 AM pfSense Packages Bug #5318: Upgrade FreeRadius to 2.2.9
- If there are problems compiling v2.2.9....
For the short term, could we not just change the makefile of the currentl... -
08:51 AM
Bug #5714: Number of dashboard columns lost on 2.2 -> 2.3 upgrade
- Added upgrade_133_to_134() function to calculate the required number of columns and save as $config['system']['webgui...
-
08:50 AM
Bug #5714 (Feedback): Number of dashboard columns lost on 2.2 -> 2.3 upgrade
- Applied in changeset commit:29c0d920f41299d8a29ca3cb1dec5e44dcad55e2.
-
08:36 AM
Bug #5714 (Resolved): Number of dashboard columns lost on 2.2 -> 2.3 upgrade
- 2.3 uses a new config setting "dashboardcolumns". This needs to be guessed/set on upgrade from 2.2.x
Also available in: Atom