Activity
From 09/16/2015 to 10/15/2015
10/15/2015
-
10:15 PM Bug #5291: Difficult to be sure that a package install has ended
- I did reinstall all on a system with Cron and OpenVPN Client Export Utility installed. The reinstall completed very q...
-
12:03 PM
Bug #5291: Difficult to be sure that a package install has ended
- reinstallall functionality restored and tested.
Please note that the progress bar is suppressed during this operat... -
- Single package reinstall works.
But Diagnostics->Backup/Restore, "Reinstall Packages" does nothing after pressing "C... -
07:05 AM
Bug #5291: Difficult to be sure that a package install has ended
- Confirmed that reinstallation works as expected. (tested with sudo, snort and pfBlockerNG)
PR merged and tested.
... -
06:54 AM
Bug #5291: Difficult to be sure that a package install has ended
- I believe the reinstallation issue was fixed late yesterday with an update to the pfSense-update script but I will ch...
-
- See pull request https://github.com/pfsense/pfsense/pull/1965 for a couple of changes to tidy up a few bits of text.
... -
09:03 PM pfSense Packages Bug #5309 (Duplicate): Need to Re-Download Blacklist every-time I restart the box
- I have been facing this issue since I don't know when. I am currently on version 2.2.4-RELEASE (amd64), supposedly t...
-
08:10 PM Bug #4856: Traffic Shaper blocks traffic when the config is otherwise changed
- I've seen similar symptoms using 2.2.4 on AMD64 and ADI/Embedded architectures. I can reproduce this by configuring W...
-
07:19 PM pfSense Packages Bug #4420: warning: bad command startup -- throttling
- This didn't help me - I also had to do a
@pkg install Postfix
@
and everything burst into life. -
04:03 PM pfSense Packages Bug #4508: Mailscanner does not work on pfSense 2.2.
- Neither postfix nor mailscanner even begin running in 2.2. The maintainer has offered a 'sort of' workaround for pos...
-
02:39 PM pfSense Packages Bug #4453 (Resolved): Squid-in-the-middle SSL Bump downgrades client SSL/TLS connections
- thanks
-
01:48 PM pfSense Packages Bug #4453: Squid-in-the-middle SSL Bump downgrades client SSL/TLS connections
- @OP: This is fixed with 0.4.1.
Note: If you need more strict ciphers without the "high" ones, use System Patches p... -
02:19 PM Bug #5308 (Resolved): Failed Namecheap DDNS updates don't cause an error in the GUI.
- Hi,
I recently tried to set up Namecheap DDNS and ran into a minor issue. When I added the client it appeared to ... -
- thanks
-
- Yes, thanks, I missed your point there. fixed
-
- works
-
-
10:30 AM Bug #5241: rightca should be specified in ipsec.conf
- Applied in changeset commit:cd4aa77ca3f6099c533800934efbb1496b9ff7e6.
-
- Applied in changeset commit:7a7e1ba909e37d237e36c43a847faecfdf9559b5.
-
10:08 AM Bug #4401: remove xen netfront driver until it can handle altq
- I've been told that there has been posted a patch that will give us the switch we need:
https://svnweb.freebsd.org... -
- 2.2.4 running, still no ALTQ...
I don't see any traffic on freebsd-xen@freebsd.org about xn, so it appears that we c... -
- Just to step in, until VLAN and ALTQ is supported there really needs to be a way to disable xn.
-
- That looks good now - thanks.
2.3-ALPHA (amd64)
built on Wed Oct 14 16:15:05 CDT 2015
10/14/2015
-
- This nonsense is "fixed" here: https://github.com/doktornotor/pfsense-packages/commit/509120a29dba7761c6fcd0b63eb34ab...
-
- This works just fine in 0.4.0; the broken code has been completely rewritten.
-
12:10 PM
Bug #5259: firewall_aliases_edit.php: Switch to a URL Table type when you already have multiple rows
- Applied in changeset pfsense:commit:a955944077507b434f1870ae6002b714c78b7648.
-
12:08 PM
Bug #5259 (Feedback): firewall_aliases_edit.php: Switch to a URL Table type when you already have multiple rows
- Added Javascript to hide and disable rows > 0 on selecting table types. Disabling them is required to ensure they are...
-
-
- I reviewed the code and tested it's effect on the config file generation and it looks ok. It has been merged.
-
-
- This was fixed in the previously referenced commit and has been tested.
-
10:50 AM
Bug #5291: Difficult to be sure that a package install has ended
- Applied in changeset pfsense:commit:35fcf1c1eb105da320b63550edfa5063af7312b3.
-
10:46 AM
Bug #5291 (Feedback): Difficult to be sure that a package install has ended
- The package installer now shows a color coded completion banner, "real time" log data and a progress bar.
The prog... -
10:47 AM
Bootstrap
Todo #5279 (Resolved): Package installation GUI updates
- Scripts combined and reloads handled.
-
10:14 AM Bug #5257: tcpdump is not working with zerocopy enabled (net.bpf.zerocopy_enable=1)
- Fix submitted to upstream: https://github.com/the-tcpdump-group/tcpdump/pull/486
-
07:37 AM Feature #5307 (New): Add logarithmic scale option to RRD graphs
- Some graphs have data at much different scales, such as the quality graph's loss and latency, where detail can be los...
-
05:25 AM Bug #4686: Rekeyed SAs are not properly removed
- I confirm.
All my pfsense boxes on latest 2.2.4 version.
IPsec tunnels working!
Thanks. -
- To avoid nonsense like this: https://github.com/doktornotor/pfsense-packages/blob/patch-2/config/squid3/34/squid.inc#...
-
- OK, I guess you can close this. The Squid3 code was completely insane in the first place and was rewritten from scratch.
-
- I guess I should have been more explicit - your really sure you don't want...
-
- Kill Bill wrote:
> Are you sure this is correct?
>
Yes, $on is the interface identifier (wan/lan/optX) at that ... -
- Are you sure this is correct?...
-
- should be fixed, leaving for confirmation in snapshot builds.
10/13/2015
-
- The recent fixes I did in bpf (that fixed the zerocopy buffers in bpf) caused this issue (now that tcpdump is really ...
-
- commit:
https://github.com/pfsense/pfsense/commit/db322752ebb5fecc54bd9ce841874b47624c89c6 -
- IKEv2 P1s can have both IPv4 and IPv6 P2s.
already implemented, didn't have a ticket.
https://github.com/pfsens... -
- committed to RELENG_2_2 in https://github.com/pfsense/pfsense/commit/5bf321b6dd7a00124927fe3894e07b35b1f27640
-
-
- confirmed fixed
-
- done
-
08:10 AM Todo #5254 (Feedback): TZdata update to 2015f
- Applied in changeset commit:8832202d54d2ff3f50875b86243c6a1a2708743d.
-
- I think something other than the upgrade to 2.2.4 changed things here, and it doesn't appear to be attributable to a ...
-
07:12 PM Bug #5245 (Confirmed): iOS IPsec PSK mismatches
- I'm assigning this to Matt, and putting it back in Confirmed, so he can weigh-in.
-
- Assigned to Chris for verification and close
-
- this seems to be fine, works on 2.2.5 and 2.3 after reboot and a stop/start. Asked mgsmith to double check.
-
- fixed, thanks!
-
- Applied in changeset commit:fc3bec296c676d1bf5a618b62b18f96580d1235b.
-
- The zones that are within /usr/share/zoneinfo/ and not one of its sub-directories are missing in 2.3. That includes m...
-
- done
-
- Including all the log files instead of just some in the status tgz output would be very helpful for support purposes.
-
04:21 PM Bug #4463 (Confirmed): Fix the NTPD Access Restrictions / and other NTPD related issues, including GPS
- services_ntpd needs be updated to allow the selection of access controls on a per interface basis.
-
- fixed
-
01:55 PM Bootstrap Todo #5299 (Resolved): Remove Reinstall GUI funtionality from installed packages
- I removed the text from wiki page.
-
12:54 PM
Bootstrap
Todo #5299: Remove Reinstall GUI funtionality from installed packages
- Code has been removed. Would you please update the wikior assign to whomever does that?
-
01:18 PM
Bootstrap
Bug #5302 (Resolved): Traffic shaper wizaerd has minor issues
- See: https://forum.pfsense.org/index.php?topic=100762.0
This is an issue for both Multiple Lan/Wan;traffic_shaper_... -
01:17 PM
Bootstrap
Bug #5248 (Resolved): OpenVPN dashboard widget layout
-
01:03 PM
Bootstrap
Todo #5279: Package installation GUI updates
- The package installation system has been updated such that:
* The installer is run in the background so that the GUI... -
01:02 PM
Bug #5291 (Assigned): Difficult to be sure that a package install has ended
- The package installation system has been updated such that:
* The installer is run in the background so that the GUI... -
12:55 PM
Bootstrap
Bug #5296 (Resolved): Notification E-Mail Auth Mechanism missing
-
- fixed, thanks
-
- Thanks; did run gitsync twice and the permisssions went back to 01777.
P.S. Regarding "PHP chmod() doesn't like 1... -
- Applied in changeset commit:61af87f68d2d48036822f9f769830c4b61cf6bc4.
-
- Applied in changeset commit:8aec82088cc65605161c1d21180ba8e6ec737e22.
-
- Use the Filer package for this.
-
- The package only invokes the patch utility in FreeBSD using the patch contents. It does not parse the patch itself. S...
-
10:45 AM pfSense Packages Bug #5301 (Needs Patch): System Patches - fails to set permissions from a 'new file mode' line in a git diff
- System Patches doesn't handle 'new file mode' lines in a git diff, for example:...
-
- This is now somewhat out-of-date. Menu 13 - Upgrade from console - now does stuff to the other slice, get "Illegal nu...
-
- I'm guessing the error happening because the version you were running before upgrade contained the old version of pfS...
-
- When one extension depends of other, if they are in wrong order inside extensions.ini PHP breaks. For instance, if su...
-
- Supplementary pull request to fix master: https://github.com/pfsense/pfsense/pull/1963
Apologies - I forgot about ... -
- There is "manual configuration" option in the Antivirus GUI which lets you edit the files manually put those where-ev...
-
01:32 AM pfSense Packages Bug #4615: /var/logs/c-icap/server.log & access.log growing without being rotated
- 6 months ago, I have tested the code in 3 different (2x x64, 1x x86) machines for squid3 ver 0.3.4 without any king o...
-
- the same original issue still seems to exist in latest 2.2.5. Obtained leases on 50 clients, all registered fine. Ano...
10/12/2015
-
- fixed
-
- moving this to 2.3, we'll leave 2.2.5 as-is.
-
- fixed
-
- should be fixed, leaving for review.
-
- Thanks David! Both merged, leaving for additional testing confirmation once they're in a snapshot.
-
- Pull requests submitted:
master: https://github.com/pfsense/pfsense/pull/1961
RELENG_2_2: https://github.com/pfse... -
- ppp-linkdown and ppp-linkup are not aware of SLAAC, DHCP6 and DHCP-PD. This has the following consequences:
Link g... -
- fixed
-
- Thanks for the feedback. The original issue doesn't always happen, so as long as the config is otherwise fine, you mi...
-
- Assigned to Matt, but if it doesn't get fixed for 2.3, I'm not bothered.
-
- assigning to Steve Beaver so he can see if it's really fixed.
-
- Ok great. The wiki page would also need to be updated: https://doc.pfsense.org/index.php/Package_Manager
-
05:24 PM
Bootstrap
Todo #5299 (Assigned): Remove Reinstall GUI funtionality from installed packages
- I believe this needs to be removed. I will do so today.
-
- Remove the Reinstall GUI button from pkg_mgr_installed.php and the supporting code in pkg_mgr_install.php?mode=reinst...
-
- 2.2.5 already has OpenVPN 2.3.8. If someone who can replicate can try 2.2.5 and report back, that'd be appreciated. I...
-
- gitsync itself hasn't changed in RELENG_2_2 since pre-2.2.0 release, but something it's calling has, confirmed /tmp p...
-
- ...
-
- Steve Beaver cleaned it up by moving the text below the progress bar.
-
- Steve Beaver wrote:
> Jarred: Would you play with the panel-heading class colors in this widget please? We should pr... -
- System User Delete checks committed https://github.com/pfsense/pfsense/commit/8d070c072ec2b662f6a235cc3779fb62835dd64...
-
07:10 AM
Bootstrap
Bug #5296: Notification E-Mail Auth Mechanism missing
- Applied in changeset pfsense:commit:f00e23d991f0397ea918c55ad1c6c54c003aa645.
-
07:03 AM
Bootstrap
Bug #5296 (Feedback): Notification E-Mail Auth Mechanism missing
-
07:02 AM
Bootstrap
Bug #5296: Notification E-Mail Auth Mechanism missing
- Missing selector provided and tested
Thanks for finding.
-
07:00 AM
Bootstrap
Bug #5296 (Confirmed): Notification E-Mail Auth Mechanism missing
-
- There is a forum thread relating to this bug: https://forum.pfsense.org/index.php?topic=100403
10/11/2015
-
- This code was committed to master in https://github.com/pfsense/pfsense/pull/1421/files
and was backported to RELENG... -
- This dropdown to choose PLAIN or LOGIN is a recent addition to 2.2.*
It is missing in 2.3-ALPHA
Forum https://forum... -
06:30 PM Feature #5295 (Closed): RRD Graphs custom color selection
- I'm sure I am not the only person that suffers from this problem but I am colorblind and a lot of the default colors ...
-
- This work is complete and pull requests against pfSense 2.3 have been submitted:
mpd5 changes: https://github.com/... -
- P.S. And just to be explicit here: /dev/null does NOT work. It causes C-ICAP to spit Error: [No Error] and makes it u...
-
- The above will be reverted in 0.4.0, except for the DebugLevel. It breaks things badly and I wasted two days debuggin...
-
- If these fixes for RELENG_2_2 are accepted, then they need to also be done in master for 2.3
-
- https://github.com/pfsense/pfsense/pull/1958
Similar fix for preventing deletion of a system group. -
- https://github.com/pfsense/pfsense/pull/1957 should check for this case of the user manually messing with the $POST v...
10/10/2015
-
05:55 PM Bug #5180: DDNS sometimes not updating after primary WAN failure
- Yup, I saw that and dug through the code and believe I've figured out what's going on (although I seem to have two se...
-
02:35 PM Bug #5294 (Resolved): System users and groups not fully protected from deletion
- It's possible to shoot yourself on the foot and delete the admin user and all/admin groups.
1. Configure tamper d... -
01:45 PM Bug #4642: OpenVPN process status stopped... but its running
- If it is the bug, it can even be fixed for 2.2.5 with an update of OpenVPN to 2.3.8.
-
- A similar but not identical case is described in the bug tracker of OpenVPN. From my understanding, even we don't use...
-
10:08 AM pfSense Packages Bug #5005: Quagga OSPF Package GUI Fails on 2.2.4
- Great success! The webgui Status tab works and I've got 4 neighbors again. Thanks!
-
08:14 AM pfSense Packages Bug #5005: Quagga OSPF Package GUI Fails on 2.2.4
- Can you try reinstalling the package again?
The pullrequest was committed 15 minutes ago. -
07:56 AM Bug #1974: Captive Portal RADIUS accounting bytes wrong
- The bug is still here on 2.2.4 release 32bits as well as 64bits, why is this taking so much to resolve ?
Browsed and... -
- It's most likely something in the way it (re)reads/parses or writes the config which causes the existing $config to b...
-
- I would truly appreciate if someone traced the *real* cause of the install_cron_job() breakage, instead of reverting ...
-
07:10 AM
Bootstrap
Bug #5293: Edit button on block private/bogon rules goes to wrong page
- Applied in changeset pfsense:commit:6f5a3fead80408f084156aa76f471b3bb611dc48.
-
07:08 AM
Bootstrap
Bug #5293 (Feedback): Edit button on block private/bogon rules goes to wrong page
- Button link corrected.
-
- What's in Luiz's src repo passes all the basic tests including Linux and Cisco ASA interoperability. Let's get that m...
-
- part of #5279, but good feedback here, will leave to make sure that's addressed once finished.
-
- I fixed the help text so it shows the field description, which was the primary issue here. That'll suffice.
-
- moving since it's not bootstrap-specific
-
- looks good, thanks!
10/09/2015
-
- I think the root cause here is more widely applicable than just this circumstance. For instance, if a dashboard widge...
-
- Diagnostics->Command Prompt
In "Execute PHP Commands" box, put some code with a fatal PHP problem:
$x = badfuncti... -
- looks good
-
07:40 AM
Bootstrap
Bug #5289: Available Packages display - version is missing from displayed data
- PR phil-davis:patch-10 applied.
Thanks. -
- Applied in changeset pfsense:commit:c4f5e057fe0aec72a442a058fc0a92e317b0541b.
-
- Forum: https://forum.pfsense.org/index.php?topic=100609.0
The version column heading is there, but the description... -
- In that last log snippet, you didn't have functional DNS resolution. That "Could not resolve checkip.dyndns.org" log ...
-
- Okay, I'm not sure why this changed, as I've made no changes to config since opening the ticket, but I noticed this w...
-
- The edit button to the right of the block private and block bogon rules on firewall_rules.php goes to the wrong page....
-
- That looks much better.
I see what you mean about the columns - in each section the columns will adjust depending on... -
02:24 PM
Bootstrap
Bug #5248 (Assigned): OpenVPN dashboard widget layout
- Widget revised to use Bootstrap panels instead of outer tables. Table layout and classes corrected. There is a somewh...
-
02:20 PM
Bootstrap
Bug #5248: OpenVPN dashboard widget layout
- Applied in changeset pfsense:commit:b18303f197f95a6591d5684771a9fe8166b286be.
-
12:04 PM
Bootstrap
Bug #5248: OpenVPN dashboard widget layout
- Thanks. I just need to bite the bullet and configure something similar here. JimP is going to help me with that.
-
- This screen shot is from a system with 1 OpenVPN road-warrior server and 3 site-to-site clients.
The server sectio... -
10:24 AM
Bootstrap
Bug #5248 (Feedback): OpenVPN dashboard widget layout
- Widget tables have been updated to Bootstrap classes, header tags and rowspans corrected.
The appearance seems to ... -
- arrows look good. Put this back to assigned for the remainder
-
06:30 PM
Bootstrap
Bug #5292 (Resolved): Log widget icons not functional
- Fixed by restoring/fixing the Javascript
-
06:30 PM
Bootstrap
Bug #5292 (Resolved): Log widget icons not functional
- More missing JS
-
05:23 PM
Bootstrap
Bug #5194 (Feedback): diag_dump_states.php "Remove" button should be an X
- Fixed via PR: https://github.com/pfsense/pfsense/pull/1956
-
04:31 PM Bootstrap Bug #5194: diag_dump_states.php "Remove" button should be an X
- PR: https://github.com/pfsense/pfsense/pull/1956
-
- I've had three successful upgrades so far on different boxes. The one failed upgrade that I reproduced with the confi...
-
- Looks like a bug to me, this might be the issue: https://github.com/pfsense/pfsense-packages/pull/1090
Installatio... -
- Please, try with 0.3.9.1. Preferably on a sane box that did not have 159 previous Squid versions installed.
-
03:57 PM Bug #4210: Bring back a FTP proxy
- I agree with Jérémy R. The FTP proxy is still needed to properly handle communication with an FTP server sitting behi...
-
- Just dropping a note here to note that commit:54c8ef44041a0213da54bf93f14d1d7fca218000 was also put in to help here -...
-
08:40 AM
Bootstrap
Bug #5290 (Resolved): Installed packages listed on pkg_mgr.php
- Page no longer displays installed packages
-
07:49 AM
Bootstrap
Bug #5290 (Resolved): Installed packages listed on pkg_mgr.php
- Packages already installed should not be listed here.
-
11:47 AM
Bug #5291 (Confirmed): Difficult to be sure that a package install has ended
- Duplicates #5279
The package manager is a WIP. I am converting it to a system that starts the installation process... -
- Also when you remove a package, the title of the text box says "Beginning package installation" - that is a bit dumb,...
-
- The Package Installer screen has a scrolling text box that shows the progress of the package installation. Various st...
-
- fixed
-
- fixed
10/08/2015
-
- fixed
-
- fixed
-
- all good
-
05:00 PM
Bootstrap
Bug #5287: System Information widget issues
- Applied in changeset pfsense:commit:a306181b6b7ce5e066b8a2ba69cc1e4ac5bffb3a.
-
04:56 PM
Bootstrap
Bug #5287 (Feedback): System Information widget issues
- Javascript MIA
Retrieved, updated and fixed
Graph values now appears under the bar graphs not inside (so you can re... -
01:40 PM
Bootstrap
Bug #5287 (Assigned): System Information widget issues
-
- The System Information widget has lost the numeric values displayed for state table size, mbuf usage, memory usage, a...
-
- fixed
-
08:00 AM
Bootstrap
Bug #5034: status_rrd_graph.php should go straight to graph chosen
- Applied in changeset pfsense:commit:112284e15581a31e34e67a283bc20fdd7f04132d.
-
07:53 AM
Bootstrap
Bug #5034 (Feedback): status_rrd_graph.php should go straight to graph chosen
- Made it so.
-
- all those circumstances seem fine, been through a variety in the past couple days with no issues found.
-
-
- It was available in the package repo at the same time the commit showed up here on the ticket. It's there now.
-
03:32 PM
pfSense Packages
Bug #5205: squid General Tab configuration can't be saved
- This version of squid.inc seems to solve the problem of saving general parameters.
When the fixed version will be ... -
- fixed
-
- issue's fixed. the success message isn't that big of a deal, but if you find a way to add dismiss there Phil, feel fr...
-
09:00 AM
Bootstrap
Bug #5286 (Resolved): Alias pop-ups should display the target description as well as its value
- Converted pop-up format to table and added description
-
08:59 AM
Bootstrap
Bug #5286 (Resolved): Alias pop-ups should display the target description as well as its value
- It's all in the title.
10/07/2015
-
- done
-
- fixed
-
- this is finished
-
- those are fixed, haven't seen any other instances of this.
-
- settings button was removed. all fixed
-
- fixed
-
01:18 PM
Bootstrap
Bug #5181: vpn_ipsec.php phase 2 reordering issues
- Drag/drop ordering of P2s has been added and tested.
Jared - Let me know if you want me to look at the manual re-o... -
12:39 PM
Bootstrap
Bug #5181: vpn_ipsec.php phase 2 reordering issues
- we should not be using "Move to here" buttons any more but drag/drop ordering. If you assign this to me I can take ca...
-
- fixed
-
- fixed
-
- fixed
-
- fixed
-
07:20 AM
Bootstrap
Bug #5276: halt.php - Service status output is not properly formatted
- Applied in changeset pfsense:commit:ea1bbc43042235f4d763421702408072499e8d87.
-
07:13 AM
Bootstrap
Bug #5276 (Feedback): halt.php - Service status output is not properly formatted
- And so it was.
-
- Same issue as #5271 but on halt.php, should be an identical fix.
-
- fixed
-
08:00 AM
Bootstrap
Bug #5277: Services Status Widget - Clicking an action (start, stop, restart) has no effect
- Applied in changeset pfsense:commit:d8ed9328d7924c91d4cef20584facd119e55a85f.
-
07:58 AM
Bootstrap
Bug #5277 (Feedback): Services Status Widget - Clicking an action (start, stop, restart) has no effect
- I broke this by converting the services->status page to POST. All pages that reference services have now been fixed t...
-
- Same thing happens with the service controls in the shortcut bar on other pages for a specific service.
-
- Clicking an action icon to control a service in the service status widget has no effect. Instead, the page scrolls up...
-
- fixed
-
12:20 PM
Bootstrap
Bug #5283: Firewall rule Destination Type is missing This Firewall (self)
- Applied in changeset pfsense:commit:bda7ff6da0cfadbacf5f564fc56a632cc2fc8f99.
-
12:14 PM
Bootstrap
Bug #5283: Firewall rule Destination Type is missing This Firewall (self)
- Done
-
- "self" needs to be "(self)" as commented on the GitHub commit.
-
11:20 AM
Bootstrap
Bug #5283: Firewall rule Destination Type is missing This Firewall (self)
- Applied in changeset pfsense:commit:654e800764e365d5f0bf5cede7fc9e2862b293fa.
-
11:17 AM
Bootstrap
Bug #5283 (Feedback): Firewall rule Destination Type is missing This Firewall (self)
- "self" option added to destination selector (only)
-
- Adding a sample screen shot from 2.2.* system for reference.
-
- On 2.2.4 a destination type "This Firewall (self)" can be selected when editing a rule.
This does not appear in the ... -
- fixed
-
- Steve Thomas wrote:
> Is support for this no longer planned??
Not likely for 2.3, maybe at some point. Not a very... -
- 10.64.64.0 is what gets filled in if you don't have a gateway obtained from PPP. I'm guessing it's actually failing t...
-
01:20 AM Bug #5273 (Closed): UMTS / 3G Connection reports wrong Gateway information (10.64.64.0) and no data is going through that connection.
- Hello Pfsense team,
first of all thanks for all the work you put into PFsense. I am using it since 5 years now and... -
- if the XML is invalid, and there are backups in the config history, it'll restore from there. So there is a "failsafe...
-
- Unfortunately, I don't know for sure, I installed all the available packages and tried to use invalid data in every i...
-
- what specifically did you do to break it? that looks like $config is no longer an array and is within the config upgr...
-
- I'm not sure if this should be a feature request or a bug report, anyway since I've been messing around the webUI on ...
-
01:45 PM
Bootstrap
Bug #5282: Alias system broken on edit
- Further updated to support both src and dst.
elseif replaced with if since they are not mutually exclusive. -
10:32 AM
Bootstrap
Bug #5282 (Resolved): Alias system broken on edit
- * Fixed JavaScript
* Unable to reproduce
* Misplaced return caused alias system to only process one type of alias p... -
09:25 AM
Bootstrap
Bug #5282 (Resolved): Alias system broken on edit
- https://forum.pfsense.org/index.php?topic=100494.0
# When inserting\editing a port or URL alias, it's possible to ... -
-
12:36 PM
Bootstrap
Bug #5109: services_captiveportal.php missing description for RADIUS servers fields
- The Bootstrap framework does not have the ability to show column titles. We can look at this in a future release, but...
-
12:30 PM
Bootstrap
Todo #5204: Clean up jquery sections at the bottom of pages
- Common functions have already been moved to jquery/pfSense-helper.js
-
12:13 PM
Bootstrap
Bug #5223: Dashboard Available Widgets section is always open
- https://git.pfmechanics.com/pfsense/pfsense/commit/025972525b49c513bd3d1dad5cc69cf49e98605b
Prevents "Store widget... -
- thanks
-
- Looks good, saves dashboard space, and it works - 3 pluses :)
-
10:59 AM
Bootstrap
Bug #5223 (Feedback): Dashboard Available Widgets section is always open
- Better to close my unneeded ticket. Yours was first :)
I was able to add the suggested functionality this morning. -
- This is now a duplicate of https://redmine.pfsense.org/issues/5280
This can be closed. -
- Mobile IPsec with IKEv2 can use both IPv4 and IPv6 at once but we only have a GUI option to allocate IPv4.
Needs s... -
- Applied in changeset commit:7d613d5c35a0effaadfe409cc80e07068fdcc39b.
-
09:20 AM
Bootstrap
Bug #5281 (Resolved): IPSec widget is ugly when no tunnels defined
- Appearance changed to a more subtle and compatible one.
-
09:19 AM
Bootstrap
Bug #5281 (Resolved): IPSec widget is ugly when no tunnels defined
- <h2> and class="alert" makes for an ugly appearance that is not in line with other widgets.
-
08:23 AM
Bootstrap
Todo #5279 (Resolved): Package installation GUI updates
- Recent changes to the package system require the GUI is updated to match.
pkg_install.php will now start the insta... -
- Fixed, thanks.
I purposely went to DynDNS and changed the IP address of the DynDNS name to some random rubbish and... -
07:20 AM
Bootstrap
Bug #5275: services_dyndns_edit.php there is no save and force update button
- Applied in changeset pfsense:commit:06972ee55b6fd3da0a54de9b41424ab3184567be.
-
07:10 AM
Bootstrap
Bug #5275 (Feedback): services_dyndns_edit.php there is no save and force update button
- Save and Force Update button added.
Tested by following code path, but not with a real DynDNS provided. -
- There used to be a "Save and Force Update" button on this screen, so you could make the dynamic DNS try to update its...
-
- Fixed, thanks.
-
07:00 AM
Bootstrap
Bug #5274: services_dyndns_edit.php existing password is not loaded/saved when editing
- Applied in changeset pfsense:commit:b19ff0d2dfc39f32ecb6b7d5f4836cd22a3c4ea0.
-
06:58 AM
Bootstrap
Bug #5274 (Feedback): services_dyndns_edit.php existing password is not loaded/saved when editing
- Element names corrected for password and description.
Page now displays those values on load. -
- Try to edit an existing Dynamic DNS entry.
In 2.2.* you can edit, change the description or other inconsequential ... -
- Looks right now, thanks!
-
- Thanks, that helps. I removed the attachments and committed them to a private internal repo so a few others can see i...
10/06/2015
-
07:26 PM pfSense Packages Bug #5255: Clamav not updating
- You are right. I am taking things too seriously lately. My fault. What I really need is a vacation. :(
-
- That was a joke... seems your sarcasm detector is broken. And no, the changelog cannot be fixed anywhere in the packa...
-
- There is no such thing as "bug free version" in software development. Really.
If the bug free version is the stabl... -
- 0.4.0 is reserved for the final bug-free version, after which I won't touch this damned package ever again... :-P
... -
- Great. Thanks for the FAQ link, I'll follow it.
Anyway, the update info should be available from the beginning in... -
- https://github.com/pfsense/pfsense-packages/pull/1088
-
05:08 PM
Bootstrap
Bug #5272 (Resolved): system_routes_edit.php: Unable to create route with IP address
- Input element patter was missing a '.' thus preventing an IP address from being entered.
-
05:07 PM
Bootstrap
Bug #5272 (Resolved): system_routes_edit.php: Unable to create route with IP address
- https://forum.pfsense.org/index.php?topic=100461.0
-
05:00 PM
Bootstrap
Bug #5264: Services Status widget crash after selecting hidden services
- Applied in changeset pfsense:commit:4670142b31d3f5f499611c08aeb8d090b49544b7.
-
04:58 PM
Bootstrap
Bug #5264 (Feedback): Services Status widget crash after selecting hidden services
- select element name changes to array; name="servicestatusfilter[]"
-
04:44 PM
Bootstrap
Bug #5264 (Confirmed): Services Status widget crash after selecting hidden services
-
- 1) Add the Services Status widget to the dashboard
2) Open its settings tool
3) Select 1 or more services to hide a... -
05:00 PM
Bootstrap
Bug #5265: RSS Feed Content Limit is restricted to multiples of 100
- Applied in changeset pfsense:commit:aeff01b344c4ba24dcbafc54c8b9bb2ab27ec584.
-
04:52 PM
Bootstrap
Bug #5265 (Feedback): RSS Feed Content Limit is restricted to multiples of 100
- Updated as suggested with step="10"
-
04:45 PM
Bootstrap
Bug #5265 (Confirmed): RSS Feed Content Limit is restricted to multiples of 100
-
- Pull request https://github.com/pfsense/pfsense/pull/1950
-
- But the default value is 140.
This results in a message when trying to save RSS widget settings:
"Please select a v... -
04:10 PM
Bootstrap
Bug #5271: reboot.php - Service status output is not properly formatted
- Applied in changeset pfsense:commit:d90a0e2d47444a739754292b2936609c70aa5387.
-
04:03 PM
Bootstrap
Bug #5271 (Feedback): reboot.php - Service status output is not properly formatted
- HTML formatting corrected
-
- When the system is rebooted from reboot.php, the service shutdown output is printed on the page. Usually this should ...
-
03:55 PM Bug #4808: Unbound segfaults
- Mark Janssen wrote:
> Unfortunately not, it seems to crash rather randomly. I'd love to be able to capture a stacktr... -
- Works great now, thanks!
-
02:30 PM
Bootstrap
Bug #5268: interfaces.php - "Track Interface" drop-down is empty
- Applied in changeset pfsense:commit:9abccff3fde86275d591dfe6d84b34bef17e963d.
-
02:29 PM
Bootstrap
Bug #5268 (Feedback): interfaces.php - "Track Interface" drop-down is empty
- Function missing global . . so could not detect interfaces.
-
- When selecting "Track Interface" for the IPv6 configuration type, the "IPv6 Interface" drop-down selector under "Trac...
-
- Looks good now, thanks!
-
03:30 PM
Bootstrap
Bug #5270: Dashboard widgets are not using the second column
- Applied in changeset pfsense:commit:d500b9daf65a4f6001749cbaa8ffc497d3fd4872.
-
03:25 PM
Bootstrap
Bug #5270 (Feedback): Dashboard widgets are not using the second column
- Provided missing closing </div>
-
- Sometime in the last two days (Between Sunday Oct 4th ~23:00 and Tuesday Oct 6th at ~9:00AM CDT) the Dashboard has br...
-
- Works now, thanks!
-
03:30 PM
Bootstrap
Bug #5269: interfaces.php - IPv6 gateway drop-down is not populated with entries from System > Routing
- Applied in changeset pfsense:commit:9f3f42767e0c4c7c160f95d149f64ac9bd711061.
-
03:18 PM
Bootstrap
Bug #5269 (Feedback): interfaces.php - IPv6 gateway drop-down is not populated with entries from System > Routing
- Supplied missing globals, added new build_gatewaysv6_list() function, corrected element names.
-
- The IPv6 gateway drop down list on interfaces.php is empty, even when there are IPv6 gateways defined that meet the p...
-
- Works now, but found something else slightly related, I'll open a new ticket for it.
-
01:51 PM
Bootstrap
Bug #5266: interfaces.php - IPv6 gateway add form is not functioning
- Corrected element names
-
01:50 PM
Bootstrap
Bug #5266 (Feedback): interfaces.php - IPv6 gateway add form is not functioning
- Applied in changeset pfsense:commit:4dda31742eebc51977113f5d57781c943cbd0543.
-
- When set to Static IPv6, the form to add an IPv6 Gateway appears with the right title, but the label says "Gateway IP...
-
- Looks good now!
-
01:40 PM
Bootstrap
Bug #5267: diag_ping.php - Multiple issues
- Applied in changeset pfsense:commit:214e79b0bd59f31996aefedc5d9490d08dad9111.
-
01:30 PM
Bootstrap
Bug #5267 (Feedback): diag_ping.php - Multiple issues
- Function create_sourceaddresslist() corrected and protocol changed to selector.
-
- 1) Interface drop-down option/values are incorrect. Only shows "W" and "L" but should have WAN, LAN, Link local choic...
-
- Is support for this no longer planned??
-
- Can someone else please give this a good testing, because I have done that last change myself so I will easily miss s...
-
- Applied in changeset pfsense:commit:3e8bac5faa97857426e5e7f526e77f484729c26a.
-
- Now that makes a problem when the src is LANnet, for example. It considers that a 'network' type - see GitHub comment...
-
10:20 AM
Bootstrap
Bug #5261: Existing src or dst network is not shown when editing a rule
- Applied in changeset pfsense:commit:aadc597321a9cbb41fb76a5faed256ed8a13f96a.
-
10:14 AM
Bootstrap
Bug #5261 (Feedback): Existing src or dst network is not shown when editing a rule
- Corrected src/dst type logic
-
- 1) Add a rule with src or dst "Network" and enter some network (e.g. 10.11.12.0/24)and save.
2) Edit the rule
fir... -
11:41 AM
pfSense Packages
Bug #5205: squid General Tab configuration can't be saved
- This issue still exists on pfSense 2.1.5, the general parameters for Squid can't be edited from GUI.
Please confir... -
-
- The widget display format is bug https://redmine.pfsense.org/issues/5247
IMHO this bug 5233 about it being complet... -
09:30 AM
Bug #5263 (Resolved): Installed Packages widget causes index.php to hang
- If beta.pfsense.org becomes unavailable the function pkg_call() never returns.
A ten second timeout has been added... -
- thanks
-
- Fixed by https://github.com/pfsense/pfsense/commit/5fec2813cf73f58297b80b6d167910e1507a2f52
Tested on:
2.3-ALPHA ... -
- Reported in forum: https://forum.pfsense.org/index.php?topic=100353.0
-
-
- 2.3-ALPHA (amd64)
built on Mon Oct 05 18:44:18 CDT 2015
Works thanks.
-
- 2.3-ALPHA (amd64)
built on Mon Oct 05 18:44:18 CDT 2015
works, thanks. -
- My test system is an APU using the 4GB nanoBSD serial image on an 8GB SD card.
I have done 2 upgrades so far. For th... -
- This particular case is fixed.
But now (or maybe previously also) if you edit a rule that has "Network" in the src o... -
- 2.3-ALPHA (amd64)
built on Mon Oct 05 18:44:18 CDT 2015
works, thanks. -
- 2.3-ALPHA (amd64) built on Mon Oct 05 18:44:18 CDT 2015
works, thanks.
For the record I have attached 3 screen sh... -
- To record progress so far I have attached a screen shot from 2.3-ALPHA (amd64) built on Mon Oct 05 18:44:18 CDT 2015 ...
-
- That looks much better.
It has a settings button, which does not do anything and was not there in 2.2.* - maybe that... -
- Start editing a new alias, click "Add Host" a few times to get multiple rows.
Switch the alias type to "URL Table (I...
10/05/2015
-
- seems to affect all interface types, physical hardware, VMs, virtual interfaces (PPPoE, GRE, gif)
-
- tcpdump is failing when zerocopy is enabled (net.bpf.zerocopy_enable=1) which is the default.
Sample failure messa... -
06:08 PM Bug #5258 (Resolved): Using pppoe WAN with ipv6 SLAAC, reply-to rules use the wrong interface address
- When enabling reply-to rules on WAN,
Where the WAN is PPPOE, configured by SLAAC,
When you add a rule, the reply-to... -
- Just because Chris moves the target from release to release doesn't mean that there is a commitment to fix that issue...
-
04:35 PM
Feature #4083: Replace GET by POST
- status_services.php also converted
-
02:40 PM
Bootstrap
Bug #5252: Existing Alias is not shown when edit a rule
- Applied in changeset pfsense:commit:5fec2813cf73f58297b80b6d167910e1507a2f52.
-
- Applied in changeset pfsense:commit:6c287b0ef8189d5d370191e9c80847c2ac07af32.
-
02:20 PM
Bootstrap
Bug #5251: Firewall Aliases Edit URL Table allowing multiple rows
- Applied in changeset pfsense:commit:b503269138414c43de23012c00b8f3b0c35ed3ff.
-
02:09 PM
Bootstrap
Bug #5251 (Feedback): Firewall Aliases Edit URL Table allowing multiple rows
- Add and Delete buttons how hidden on table types.
Behavior checked wrt 2.2.x -
01:50 PM
Bootstrap
Bug #5249: Gateways dashboard widget display selection option AWOL
- Applied in changeset pfsense:commit:3511647f2d478508d92e216a9a104af46a9980c7.
-
01:46 PM
Bootstrap
Bug #5249 (Feedback): Gateways dashboard widget display selection option AWOL
- Code has been added to the widget to allow the selection of monitor, gateway or both.
The settings are saved to th... -
12:42 PM
Bootstrap
Bug #5248 (Feedback): OpenVPN dashboard widget layout
- No changes have been made to the layout for now, but I have added UP/Down icons so that at least you can see the stat...
-
12:30 PM
Bootstrap
Bug #5247: NTP Status Widget format
- Applied in changeset pfsense:commit:1e8f28de9b7d482a2f6eeca04d4c894d016ec752.
-
12:20 PM
Bootstrap
Bug #5247 (Feedback): NTP Status Widget format
- Fixed numerous issues in NTP widget.
Time now displays correctly (with offset from GMT) and updates once per second. -
12:28 PM
Bootstrap
Bug #5235 (Feedback): Alias Edit "Add host" button does not change to match the alias type
-
12:27 PM
Bootstrap
Bug #5235: Alias Edit "Add host" button does not change to match the alias type
- Heper PR merged. Thank you!
-
-
- Duplicate of Bug #3343 - as you have noticed yourself. Filing the same thing more times will not get anything fixed f...
-
07:32 AM pfSense Packages Bug #5256 (Duplicate): Radiusd does not restart
- Radiusd not start again after rotate the squid.
pfSense 2.2.4 i386
Log file:
Oct 5 00:00:42 php-fpm[23825]: /... -
- I am also having the same problem.
Log File:
Oct 5 00:00:42 php-fpm[23825]: /rc.start_packages: The command ... -
- Read the FAQ on the forum thread. https://forum.pfsense.org/index.php?topic=100167.0
There won't be anything fixed...
10/04/2015
-
- After the last update, Clamav is not updating with @freshclam@ anymore. All settings are set to default.
I noticed ... -
10:39 AM Todo #5254 (Resolved): TZdata update to 2015f
- Hi, the tzdata isnt update, for example Chile and Uruguay are modified the date to start of DST (chile) and dont use ...
-
07:40 AM Bug #5253 (New): 3gstats.php 100% CPU
- I have a 3G modem connected the USB port of my pfsense SG-2220 appliance.
For whatever reason, the 3G connection i... -
- Pull request: https://github.com/pfsense/pfsense/pull/1945
-
- When editing an existing rule, the source or destination alias is not shown. It thinks the rule is a network type rul...
-
- The "File saved successfully" message has no "x" to remove it. Other success messages (e.g. after editing and alias a...
-
- Firewall Aliases Edit - if you select URL Table (IPs) or URL Table (Ports) then only 1 row of data entry should be al...
-
- Proposed fix by Heper pull request https://github.com/pfsense/pfsense/pull/1943
-
- Proposed fix by Heper pull request https://github.com/pfsense/pfsense/pull/1943
10/03/2015
-
04:44 PM
pfSense Packages
Bug #5250: ACB backup time should display local time
- That or lunch-time zone (Douglas Adams)
-
- You mean this? http://www.urbandictionary.com/define.php?term=UDT&defid=5416562
:-D -
03:54 PM
pfSense Packages
Bug #5250 (Confirmed): ACB backup time should display local time
- Seems to display the time in UDT+4
-
- Having some unknown TZ time displayed in the list is not exactly helpful... I'd do a pull request except that this ap...
-
- These are not dependencies in any way. There are bunch of plugins (scripts/binaries) to performs configurable checks ...
-
- ought to be some way to get the dependencies corrected on the package (though if all those were there, it might be an...
-
03:04 PM
Bootstrap
Bug #5247: NTP Status Widget format
- Looks like some debugging perhaps. Sure, I'll look at the hIPv6 thing too.
-
- This obviously should show local time (adding the TZ info there is good idea, the rest - definitely not.)
While he... -
- Also the old display used to tick the time, the new display seems static.
-
08:24 AM
Bootstrap
Bug #5247: NTP Status Widget format
- Thanks Phil,
I'll look at the code and figure out what the display represents. -
- The NTP Status dashboard widget is displaying some stuff a bit weird - see screenshot attached.
First row says "Serv... -
01:38 PM
Feature #4083: Replace GET by POST
- Its cold and wet outside so I converted interfaces_vlan.php to POST.
-
12:53 PM
Feature #4083: Replace GET by POST
- I'll look at those two pages next week.
-
- Is there any ETA for 2.3? it seems the target for this has been moving from version since almost one year ago, that d...
-
10:51 AM
Bootstrap
Bug #5248: OpenVPN dashboard widget layout
- Thank you Phil. I'll look at this ASAP.
-
- Here is one from 2.2.4 with a Road Warrior server, site-to-site servers and site-to-site client.
-
- No problem. I have attached a screen shot of the the OpenVPN widget on my home pfSense "TestOffice" with 3 site-to-si...
-
08:26 AM
Bootstrap
Bug #5248: OpenVPN dashboard widget layout
- Phil,
Do you have a 2.2 installation with OpenVPN? It would be helpful to see how that looks. No problem if not, I... -
- It looks all over the shop compared to on 2.2.5. See screen shot attached. It does at least show the name/time and re...
-
- The Gateways widget recently had and option added so you can choose to display [Gateway IP|Monitor IP|Both]. It was c...
-
- It does not crash anything now. I will log a separate ticket for format/display stuff.
-
- 2.3-ALPHA (amd64)
built on Sat Oct 03 00:06:10 CDT 2015
FreeBSD 10.2-STABLE
Save is working, thanks.
-
- There are a variety of potential configuration issues, and nearly all the support cases we undertake with this descri...
-
01:19 AM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- Hi Chris,
I can fairly reliably reproduce this on 2.2.4 with two Ethernet WANs. What logs or debugs would help you... -
- "any" was listed on vpn_ipsec_keys.php as matching any ("%any"), but wasn't configured as such.
Already fixed, ti... -
- iOS PSK mismatches are happening in some cases. Going back to pre-2.2.4 behavior works, done here. https://github.com...
-
- A second CA field should be added to vpn_ipsec_phase1.php so both leftca and rightca are user-configurable.
-
- Thanks doktornotor. fixed
-
- It's bound to an interface name to ensure it egresses via its associated interface (ensures reachability where system...
10/02/2015
-
- Thanks for the follow up. Hyper-V has some timing issues especially during initial bootup of the VM (often see a slew...
-
10:52 PM pfSense Packages Bug #4932: Avahi package fails to start after reboot since 2.2.3
- This only occurs for me in a Hyper-V virtual machine. I was using 2012 R2. I re-installed on bare metal and restore...
-
- it doesn't necessarily always coincide with "Gateways status could not be determined, considering all as up/active", ...
-
- PR closed in favour of https://github.com/pfsense/pfsense/commit/86a20575ca00ca6ee7c36977289b1bbe66dea3b2
seems fi... -
- see PR: https://github.com/pfsense/pfsense-packages/pull/1087
https://forum.pfsense.org/index.php?topic=100249.0 -
06:11 PM pfSense Packages Feature #5174: nrpe: check_sensors doesnt work, missing lmsensors
- Kill Bill wrote:
> Someone kindly close this. The globbing is obviously there so that users can use their own script... -
- Someone kindly close this. The globbing is obviously there so that users can use their own scripts and have them conf...
-
- Currently all CA certs are written out to ipsec.d/cacerts/ where that should only be CAs specified on a P1 in the con...
-
- Debug log levels after a stop/start or restart rely on charondebug in ipsec.conf. But:
"Logger configurations in st... -
- RSA type VPNs should specify rightca in ipsec.conf.
-
02:12 PM
Bootstrap
Bug #5240 (Resolved): pkg.php missing funtion error
- Function provided and tested
-
02:11 PM
Bootstrap
Bug #5240 (Resolved): pkg.php missing funtion error
- function domTT_title() MIA
-
01:53 PM
Bootstrap
Bug #5159 (Closed): Javascript refactoring
-
12:29 PM
Bootstrap
Bug #5159: Javascript refactoring
- Rowhelper pages to be updated:
usr/local/www/firewall_aliases_edit.php
usr/local/www/pkg_edit.php
usr/local/www/... -
- When a CA certificate is deleted, it's not removed from strongswan's cacerts directory.
-
-
- This is fixed.
-
- thanks
-
- Well, whatever has ben fixable is fixed, the rest is PBI-related breakage. Can be closed.
-
11:42 AM
Bootstrap
Bug #5236 (Closed): Cannot add new widget to dashboard
- Basic "add widget" functionality provided via jQuery and named anchors. Widgets are added immediately on clicking the...
-
11:38 AM
Bootstrap
Bug #5236 (Confirmed): Cannot add new widget to dashboard
-
08:54 AM
Bootstrap
Bug #5236 (Closed): Cannot add new widget to dashboard
- This feature looks like it has never been implemented.
It should be possible to click a widget name in the "Availa... -
-
- PR has been merged. seems fixed
-
- That looks more like a hardware problem (disk or controller is disappearing) -- post on the forum for discussion/assi...
-
09:57 AM Bug #5237 (Rejected): Pfsense admin fails to load
- Every so often, generally when pfsense has been running for a couple of weeks, ill see this error after login
<pre... -
09:20 AM
Bootstrap
Bug #5234: Edit file Save does not work
- Applied in changeset pfsense:commit:e561ccdf824825c6aaef02c11dccd1f39528f1fd.
-
09:07 AM
Bootstrap
Bug #5234 (Feedback): Edit file Save does not work
- Javascript Base64 class had been removed. It has now been included in edit.php and hte save button works as expected.
-
-
- 2.3-ALPHA (amd64)
built on Thu Oct 01 19:28:03 CDT 2015
I am trying to edit /cf/conf/config.xml to work around s... -
08:40 AM
Bootstrap
Bug #5233: ntp_status.widget.php broken
- Applied in changeset pfsense:commit:1bde731214856aa3c5fba3547b69e9488d7653cc.
-
08:27 AM
Bootstrap
Bug #5233 (Feedback): ntp_status.widget.php broken
- The NTP widget has been fixed by adding the two missing PHP functions.
In researching this, I found a FIXME: in t... -
07:15 AM
Bootstrap
Bug #5232 (Feedback): status_captiveportal.php zone selection issue
- Changed form to auto-submit on change of zone
-
- Fixed in https://github.com/pfsense/pfsense-packages/pull/1086
-
- And if I delete a few rows, the multiple copies of "Description" text get left behind on the GUI.
-
- The button at the bottom of firewall_aliases_edit.php always says "Add host", even when the selected Alias Type is Ne...
10/01/2015
-
- Function getServerDateItems was removed, which breaks the widget and the entire web interface if you have that widget...
-
- When picking a zone from the drop down on status_captiveportal.php, it should automatically show that zone like it us...
-
- This is just after a brief testing:...
-
- this always coincides with "Gateways status could not be determined, considering all as up/active", which makes it pu...
-
- there's a race condition of some sort here. I've only had success replicating once, and only after binding an IPsec c...
-
03:52 PM
Bootstrap
Todo #5227 (Closed): firewall_aliases_edit.php Incorrect alignment
-
03:30 PM
Bootstrap
Todo #5227 (Feedback): firewall_aliases_edit.php Incorrect alignment
- Applied in changeset pfsense:commit:2cd2f78f26aca59ca1d2df058f034d09b6af909b.
-
08:05 AM
Bootstrap
Todo #5227 (Confirmed): firewall_aliases_edit.php Incorrect alignment
-
08:03 AM
Bootstrap
Todo #5227 (Closed): firewall_aliases_edit.php Incorrect alignment
- Add button needs <nav> wrapper for alignment
-
03:05 PM
Bootstrap
Bug #5230 (Resolved): Traffic graph widget only renders WAN graph
- Programmer had made provision to enable/disable each graph, but provided no means of setting those configs.
Cceckb... -
12:58 PM
Bootstrap
Bug #5230 (Resolved): Traffic graph widget only renders WAN graph
- https://forum.pfsense.org/index.php?topic=100252.0
-
- fixed
-
08:29 AM
Bootstrap
Bug #5225 (Feedback): /var and /tmp partitions size not saved
- Programmer had mangled element name in if($_POST) section
-
- When values are filled in /var and /tmp partition size in System -> Advanced -> Misc an empty value is saved to xml
-
-
- PR: https://github.com/pfsense/pfsense/pull/1941
https://forum.pfsense.org/index.php?topic=100257.0 -
12:37 PM
Bootstrap
Bug #5159: Javascript refactoring
- First phase completed. (hide/show etc)
Now needs row helper functions treated similarly -
11:09 AM
Bootstrap
Bug #5159: Javascript refactoring
- Affected files:
src/usr/local/www/diag_backup.php
src/usr/local/www/diag_logs_settings.php
src/usr/local/www/fir... -
10:57 AM
Bootstrap
Bug #5159: Javascript refactoring
- Include file javascript/pfSenseHelpers.js created and populated with common hide/show/disable/enable functions
Inclu... -
12:30 PM
Bootstrap
Bug #5193: "Are you sure you wish to Yes?" prompts
- Applied in changeset pfsense:commit:67b3520990c0dcba262b392bf5c8b06f37ede112.
-
- This is fixed now the way you suggested, Chris. Spot checking with a grep this seemed to be the only two pages setup ...
-
- I came across this one straight away. It will be very odd for users, so certainly needs to be done before release.
-
- Related commit is https://github.com/pfsense/pfsense/commit/2f1f9a989fbb05f8fbb3560fafd8bc5a7b8c0610
-
08:47 AM
Bootstrap
Bug #5226 (Resolved): Duplicated titles
- Main title is the page title, second line (in gray bar) is supposed to display breadcrumbs, but when no breadcrumbs e...
-
08:00 AM
Bootstrap
Bug #5226 (Resolved): Duplicated titles
- Need to revise the design of the page title, which is currently duplicated and unattractive
(via 2.3 alpha forum) -
08:04 AM
Bootstrap
Bug #5228 (Resolved): Empty space before (drop-down) field display value
- For example, go to Interfaces->LAN and look at IPv4 or IPv6 Configuration Type. The text of the selected value (e.g. ...
-
- Applied in changeset pfsense:commit:339b88930513dec2bc986df7c0cd7255b6815d56.
-
- 2.3-ALPHA built on Thu Oct 01 01:24:49 CDT 2015
After doing reset to factory defaults, this sort of timezone messa... -
- Edit and Alias with multiple rows (e.g. multiple networks).
The column title "Description" appears under the descrip... -
- The Dashboard Available Widgets section is always open, showing all the widgets that could be added. It uses a bit of...
-
- In 2.2.* when you reset to factory defaults only very minimal widgets are displayed on the dashboard, then the user c...
-
- Add a routine to cleanup all PBI data during the upgrade process, before boot in 2.3
-
- The work in progress GUI changes are in the RELENG_2_2-rfc4638 branch of davidjwood/pfsense on GitHub - https://githu...
-
- this is a duplicate of #4754, which has better info
-
- fixed
-
- fixed
09/30/2015
-
- Applied in changeset commit:60ff91f1b5dace563e1a6a62c3a90162782b3d8a.
-
- Done
-
- WAN0 shows as down and WAN1 up.
I'm beginning to suspect that something in the kernel went wonky because I believe q... -
- When selecting EAP-RADIUS for a IKEv2 mobile IPsec Phase 1 authentication, the chosen backend server on the Mobile Cl...
-
- When you edit any field in pfSense GUI (usually HTML <textarea>) that contains HTML data inside (usually HTML files),...
-
- This is working again now with the fix in place.
-
02:12 PM
Bootstrap
Bug #5217 (Feedback): Menu issue with open-vm-tools
- Check for presence of $config['menus'] before attempting to parse.
-
- With the Open-VM-Tools package installed, there is a sizable PHP error displayed atop the page. The Open-VM-Tools pac...
-
10:11 AM
Bootstrap
Todo #5216 (Feedback): Wizard conversion
- Conversion complete and progress bar added. All wizards tested and found to work correctly.
!wizard.gif! -
10:09 AM
Bootstrap
Todo #5216 (Assigned): Wizard conversion
- The changes can be confined to wizard.php by making that file map XML input element definitions to the new Form_* fra...
-
10:07 AM
Bootstrap
Todo #5216 (Resolved): Wizard conversion
- All wizards need to be converted to correspond to the new UI appearance
-
08:40 AM Bug #5039: Multiple PPPoE WANs no longer connect simultaneously after upgrade to 2.2.4
- Hi Chris,
I thought I had an epiphany earlier because when I went to look at the interface assignments to check wh... -
- The instance is virtualised on VMware ESXi 5.5.0 build 1623387, and there's a vSwitch for each WAN connection and ano...
-
- Please leave the discussion for the forum.
When configured properly, it has a proper configuration:
Primary:
<... -
08:12 AM Bug #5215: DHCP failover generates not working configuration.
- Ok, if you whish i will discuss the issue in the forum. But as you know the webui, there is no option to configure th...
-
- I did, and it works fine. You have a problem in your configuration if the DHCP configuration files are not correct as...
-
- Hi Jim P,
please recheck this and do not reject it that fast. it just luck that sometimes the service report normal ... -
- Configuration problem, please post on the forum for support assistance. I just set one up on 2.2.4 a day or two ago,...
-
- Using a CARP-Cluster of two nodes with DHCP Server in failover mode does not work, because the generated configuratio...
09/29/2015
-
- looks to be fixed, leaving to feedback for more testing.
-
- c0n flux: your issue is #5214, I just fixed that.
Ben: not seeing any issues along those lines. Granted I'm testi... -
- works with what I just pushed, leaving for additional testing
-
- When a gateway is enabled or disabled on system_gateways.php, Dynamic DNS updates don't occur where you have an insta...
-
- fixed
-
11:00 AM
Bootstrap
Bug #5209: duplicating gateway group loses tier configuration
- Applied in changeset pfsense:commit:1818df8bf0d1889880cf5d3d18435348f8510946.
-
10:56 AM
Bootstrap
Bug #5209 (Feedback): duplicating gateway group loses tier configuration
- Selector values corrected.
-
10:55 AM
Bootstrap
Todo #5206: Convert package UI pages to Bootstrap
- For testing
-
- no idea why this was assigned to Chris
-
10:20 AM
Bootstrap
Todo #5206: Convert package UI pages to Bootstrap
- Applied in changeset pfsense:commit:f5dbca0d3cc071c9e24fa1c84ac87702772a09ce.
-
10:15 AM
Bootstrap
Todo #5206 (Feedback): Convert package UI pages to Bootstrap
- pkg.php conversion complete
This conversion is superficial in that it simply removes hte outside table, adds Boots... -
09:13 AM
Bootstrap
Todo #5206: Convert package UI pages to Bootstrap
- pkg_edit.php now completed and tested against several packages including pfBlockerng, softflowd, sudo, miniupnpd etc
... -
- Sample code to reproduce the issue:
https://github.com/pfsense/pfsense-packages/blob/261c482e70f2613df63a8e59294b6... -
09:30 AM
Bootstrap
Bug #5212: Top menus not showing installed packages
- Applied in changeset pfsense:commit:567d7fd6c23b2712ae08cc870f199184a3edfae2.
-
09:24 AM
Bootstrap
Bug #5212 (Feedback): Top menus not showing installed packages
- head.inc parses the config files to generate the new menu entries, but it uses:
$config['installedpackages']['menu... -
09:15 AM
Bootstrap
Bug #5212 (Resolved): Top menus not showing installed packages
- When new packages are installed any menus they require should be added to the top menus. This works with some package...
-
02:15 AM
pfSense Packages
Bug #5205: squid General Tab configuration can't be saved
- After upgrade to version 4.3.10, when applying changes on the General Tab they are ignored, always presenting the sam...
09/28/2015
-
- added to base-nanobsd/exclude_files. They were already listed in base/exclude_files for full installs. To Renato for ...
-
- complete
-
- works
-
- Merged, thanks!
-
- The fix in pull request 1938 works great for me, thanks Phil, we'll get that imported.
-
- works
-
-
- looking into this while I'm working on #4990
-
07:06 PM pfSense Packages Bug #4088: Buggy squidgurd config file is created
- If you can't have log statements in ACL blocks then you can't have log statements in ACL blocks, so best to give up o...
-
- fixed
-
- Applied in changeset commit:635ee4eb05b2ca97b3b7e4a909f5d01d57563c3a.
-
- Applied in changeset commit:3b63506685babe9d7ea45212889a00700be4c917.
-
- I pushed a fix for this just now. It doesn't appear to be a security problem since the code in question is limited to...
-
- Not seeing any issues here, with PPPoE or otherwise with multi-WAN. Brought up multiple test systems with multiple PP...
-
-
- The auto-added IPsec rules over-match in some situations, primarily where using mobile IPsec. For instance if you hav...
-
-
- Considering there's been zero progress here solving the core issue... the Remove Shaper button should be either inact...
-
- This looks good now, I tried a few different combinations and the correct TLS/Shared key fields appear and disappear ...
-
- Thanks Luiz. To me for testing.
-
- The real issue here was a small race that came from EV_ONESHOT usage. Due to async nature of kqueue when we reopen a ...
-
- Applied in changeset commit:bcb21f8020f5b886d11aba49bd7b935a6b3cff6f.
-
- Will be fixed once package version 4.3.10 shows up in a few minutes. A variable was being treated like an array witho...
-
10:16 AM
pfSense Packages
Bug #5205: squid General Tab configuration can't be saved
- squid 2.7.9_4 is the last version available to install on pfSense 2.2.4, and squid 2.7.9_3 the last for pfSense 2.1.5...
-
- Pull requests have been merged. Thanks!
-
- Waiting for feedback from Jimp.
-
-
-
- This was fixed in FreeBSD and pfSense (2.3 and RELENG_2_2).
-
01:55 AM Bug #4835: Configuration changes are slow to save after upgrade
- I finally got the chance to upgrade both boxes and the problem is not any better. It's so bad that XMLRPC sync fails ...
09/27/2015
-
- https://github.com/pfsense/pfsense/pull/1939 (RELENG_2_2)
https://github.com/pfsense/pfsense/pull/1940 (master)
T... -
- This is what's being added for those packages - /etc/inc/system.inc...
-
- There are major sanitizations done to package install in https://github.com/pfsense/pfsense-packages/pull/1080 (namel...
09/26/2015
-
- And PR https://github.com/pfsense/pfsense/pull/1842 for RELENG_2_2 has also been merged.
So this is in 2.2.5 also. -
- And for 2.2.5 committed by https://github.com/pfsense/pfsense/commit/43bcb7a80228edcd8e699303a6881a5d844ec8bd
-
- This is fixed properly in https://github.com/pfsense/pfsense-packages/pull/1080, namely this commit: https://github.c...
-
- This is fixed in Squid3 package on 2.2.x. Upgrade your pfSense.
-
- Also pull request https://github.com/pfsense/pfsense/pull/1938 has a solution with a bit more logging.
Take your pick. -
- done. And good riddance, PPTP.
-
- done, and all the basics work. Will open new tickets for any specific issues I find.
-
- When you duplicate a gateway group, it needs to duplicate the tiers as well. They end up as "Never" instead.
Exam... -
- fixed
09/25/2015
-
- I went through and re-tested multi-WAN in general on 2.2.5 (which is the same as 2.2.4 in that regard) and it fails o...
-
- There have been major changes here since the initial report. Please re-test on 2.2.4 and report back if it's still an...
-
- done 2+ years ago.
-
- completed ~2-3 years ago.
-
- This was implemented a while ago, everything that's possible to configure in dhclient is configurable.
-
-
- this was added quite some time ago.
-
- PPTP is dead and gone in 2.3
-
-
- if you have a replicable set of steps for what you mentioned there, please start a new ticket with an attached exampl...
-
-
- duplicate of #4191
-
- same as #3802
-
- also breaks config backup/restore as noted in #4641
-
- #4360 covers part of this, the remainder covered by the change from start to route pre-2.2.0
-
- we disabled this by default in AWS starting with v2.2.4
-
- to Luiz to review pull request (which we'll need to move to 2.3 or have it re-submitted to https://github.com/pfsense...
-
- the cause of this is the interface binding, which has been fixed in #4908
-
- fixed
-
- unsupported version
-
12:30 PM
pfSense Packages
Bug #5205: squid General Tab configuration can't be saved
- pfSense 2.2.4 with squid (either version 2 or version 3) is buggy.
I had to correct startup scripts in order to ge... -
- Please, use pfSense versions and package versions that are actually maintained. pfSense 2.1.5 and Squid 2.7.9 are not...
-
06:15 AM
pfSense Packages
Bug #5205 (Resolved): squid General Tab configuration can't be saved
- Installed pfSense 2.1.5 with
* squid 2.7.9 pkg v.4.3.9
Only configured LAN IP address to access GUI.
Go to Syste... -
- todo is complete, we'll open bugs separately if there are issues.
-
- pfSense-upgrade done, it uses pkg to upgrade everything
-
- all the DH group values confirmed working in 2.2.5
-
- todo is complete, we can open bugs if it introduced any issues.
-
- All xmlrpc calls were removed
-
- that was a hold over from m0n0wall still. Better now, thanks!
-
- Pull request has been merged. Thanks!
-
- this is fine with the exception of #5200 which we'll address there.
-
- looks good to me, tests out fine. Jim P confirmed as well
-
- confirmed fixed by what JimP linked.
-
- fixed, thanks!
-
-
- When selecting "Hybrid RSA + xauth" as the authentication mode for an IPsec phase 1 SA on a remote access (mobile) VP...
-
- pfSense-upgrade fetches all updates before reboot, and finish the process during boot.
-
- Done
-
- created an additional pull after someone asked me to add an 'interface' column to the lease_counter table.
i stumble... -
- Almost everything was committed, other cases like missing CLA will be handled on github
-
- We need to have a mechanism to sign packages when they go from beta to final repo, and also a public key need to be a...
-
- Backend is done,
Steve is going to plan how it will interact with GUI -
01:53 PM
Bootstrap
Todo #5206: Convert package UI pages to Bootstrap
- Most of pkg_edit.php has been converted and the page is reasonable functional, though not complete. The output looks ...
-
01:48 PM
Bootstrap
Todo #5206 (Resolved): Convert package UI pages to Bootstrap
- Most packages use the pkg_edit.php page to generate a UI page from an XML file. pkg_edit.php reads the xml specificat...
-
- this is covered by the general errata listing for the slow rw->ro mounts on some flash
-
- See pull request https://github.com/pfsense/pfsense/pull/1935 for a possible solution to this.
Actually in theory ... -
- After running the wizard and changing the LAN IP it calculates a new DHCP range for LAN. Then I get 3 notices about "...
09/24/2015
-
- will leave for testing confirmation.
Thanks Jeroen! -
- this can probably be closed, 1932 has been merged.
thanks all -
- update:
the pull above is for releng 2_2
this one is for master: https://github.com/pfsense/pfsense/pull/1932
-
12:20 PM
Bootstrap
Bug #5189: vpn_openvpn_server dynamic input fields incorrect
- Applied in changeset pfsense:commit:97508a552c616b0f3c7569e54a017d53c5cd94f6.
-
12:15 PM
Bootstrap
Bug #5189 (Feedback): vpn_openvpn_server dynamic input fields incorrect
- This logic is enough to drive a person to drink.
I have made a truth table and re-coded the page to correspond to ... -
- The common functions should also be moved to a central file.
-
- There is inconstant comment and code structures that need to be cleaned up so that it is coherent when making future ...
-
- getcfg parameter doesn't filter chars with as .. or / this way an admin can retrieve other XML files from the system....
-
- Please re-test on a 2.2.5 snapshot from https://snapshots.pfsense.org/
I believe we have already fixed this after ... -
- Seems like encoding on this bugtracker breaks the payload, I'm attaching an image that shows what to type.
-
- To reproduce the cross-site scripting:
1. Go to https://localhost:9090/system_authservers.php?act=new
- on fie... -
- Running through the setup wizard on 2.2.5 results in multiple notices about an invalid DHCP pool before the wizard fi...
-
- Applied in changeset commit:83b48b440146be346e0b05ab6e42d82dc31b34c8.
-
- Applied in changeset commit:0b74438e962ead448d144f7f246f599efe01c7a9.
-
- The change made in commit:9fbcedee3b1c8e629d92a3546bf79d81ec90dca3 to improve handling of default values in package f...
-
09:10 AM
Bootstrap
Bug #5192: can't add gateway groups
- Applied in changeset pfsense:commit:acdc7fd6064827ee1e0e56bf44a8ae2e2fb75626.
-
08:58 AM
Bootstrap
Bug #5192 (Feedback): can't add gateway groups
- Element names corrected
-
- When saving a new gateway group with valid parameters on system_gateway_groups_edit.php, you end up with an input val...
-
09:03 AM
Bootstrap
Bug #5188 (Resolved): vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- P Davis clarifications merged. Thanks!
-
08:00 AM
Bootstrap
Todo #5146: services_dhcp.php not yet converted
- Applied in changeset pfsense:commit:8a73f4072e982799ddcb00e260d60fa7f549e798.
-
07:48 AM
Bootstrap
Todo #5146 (Feedback): services_dhcp.php not yet converted
- File converted and unit tested. Ready for review.
-
- Any luck with building the new PBIs incl. fonts yet?
-
- https://github.com/pfsense/pfsense/pull/1933 has been committed to RELENG_2_2.
sbeaver-netgate has been asked to mak... -
- Pull request for RELENG_2_2 https://github.com/pfsense/pfsense/pull/1933 - assuming what I am reporting here is valid...
-
- 1) After the advanced options and save button, and before the static mappings table, this text is shown:
--------
N... -
05:32 AM Bug #5198 (Duplicate): DHCP Relay Issue w/Unicast DHCP Requests
- We have multiple pfSense-Firewalls in a failover configuration on VMWare. We use CARP so we have configured VMWare ac...
-
- Pull request has been merged, thanks!
-
- https://github.com/pfsense/pfsense-packages/pull/1079
-
- Cannot reproduce any such problem unless I don't select anything in Client forward options. Select something there an...
-
- So you don't have antivirus enabled, or what? (Please, use the fine "pre" button to post code, the above is unreadabl...
-
01:46 AM pfSense Packages Bug #4663: pfsense 2.2.2-RELEASE + squid3 + squidGuard = Breaking squid.conf when using c-icap
- OK let me be more specific
function squid_resync_antivirus() {
global $config;
if (is_array($config['installed... -
02:12 AM Bug #5197 (Duplicate): WebUI: Shaper Wizard is very slow to configure on Embedded
- When walking through the Traffic Shaper Wizard (either option) on Embedded, each individual step takes longer than ex...
-
- The main thing people liked about the old widescreen package is having more than 2 columns of widgets in the dashboar...
-
- the remove button should be replaced with an X, similar to what's in 2.2.x.
-
- Some pages, like reboot.php and halt.php (and I'm guessing others), prompt for confirmation with "Are you sure you wi...
09/23/2015
-
- closer after what I just pushed. CURLOPT_INTERFACE still needs fixing to not try to bind to optX_vipY interfaces.
-
- A pull request for the kernel and mpd5 changes has been submitted - https://github.com/pfsense/pfsense-tools/pull/12
... -
- fixed
-
- fixed, thanks!
-
- fixed, thanks
-
- please post to the Spanish board on the forum.
https://forum.pfsense.org/index.php?board=10.0 -
03:13 PM Todo #5191 (Rejected): Port Forward - Pfsense 2.2.4
- Hola, tengo un problema al realizar port forward de un puerto udp en el cual recibo 30 paquetes por segundo en promed...
-
- Much better but still one small state problem.
If you have the "Automatically..." box unchecked so it shows the la... -
- We already have a "standard" URL for them on the doc wiki:...
-
- this works for 2.2.5. In 2.3, there aren't any individual files to fetch so that's a non-issue.
Thanks Phil! -
- Yeah, it obviously will never work without the required include file. This is not a place to get support, move to for...
-
- If I try to install squid3 via the command line I get the following error:
pfSsh.php playback installpkg "squid3"
... -
- I don't even get menu item or service entry for squid, so that I cannot even resave squids config. I guess it happens...
-
- The latest code in pfsense/master looks like it should be working.
I made pull request https://github.com/pfsense/pf... -
- I wish I could edit my posts on Redmine!!!
The UI box "Auto-exclude LAN address" asks for "Enable bypass for LAN i... -
- The UI box "Auto-exclude LAN address" asks for "Enable bypass for LAN interface IP". That is the reverse question to ...
09/22/2015
-
10:13 PM Feature #5190 (Resolved): Include scponly package as part of the base
- Request to add *scponly* package as part of the base configuration instead of having to:
pkg install scponly
Th... -
06:21 PM
Bootstrap
Bug #5188: vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- Yeah. The code contains this:
// The logic value sent by $POST is opposite to the way it is stored in the config... -
- most of this is good, and good catch on the 2 missing fields.
One issue still: The setting/unsetting of the confi... -
02:40 PM
Bootstrap
Bug #5188: vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- Applied in changeset pfsense:commit:7e4abf2603554b8977f492f4e0565f622eb3ebce.
-
02:33 PM
Bootstrap
Bug #5188 (Feedback): vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- New fields added and tested
-
02:12 PM
Bootstrap
Bug #5188 (Assigned): vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- Three new fields need to be added:
# CRL Checking
# Make before Break
# Auto-exclude LAN address -
- The changes to rename field, update description, and fix check/uncheck of "Auto-exclude LAN address" field (as labele...
-
- fixed
-
01:20 PM
Bootstrap
Bug #5184: services_ntpd.php missing interfaces
- Applied in changeset pfsense:commit:d05950fbcbce449ad3e3ad1b4a1d991a590efc02.
-
01:06 PM
Bootstrap
Bug #5184 (Feedback): services_ntpd.php missing interfaces
- Fixed incorrect array index
-
- fixed
-
01:00 PM
Bootstrap
Bug #5183: services_ntpd.php missing delete row option
- Applied in changeset pfsense:commit:f4439c0066f188b7b56e8322ed0b43d1742810f5.
-
12:56 PM
Bootstrap
Bug #5183 (Feedback): services_ntpd.php missing delete row option
- Table row system revised.
-
11:56 AM
Bootstrap
Bug #5183 (Assigned): services_ntpd.php missing delete row option
- Page should be converted to our PHP table library which will provide the delete functionality.
-
- those are fixed. haven't seen any others that have the same issue, will start a new ticket if there are others
-
- Fixed these three pages. Changing to feedback until more are found.
-
- also on diag_backup.php
-
- fixed
-
01:20 PM
Bootstrap
Bug #5187: can't restore configuration
- Applied in changeset pfsense:commit:3beeb66a86b632df47edaf3699cae58123b98261.
-
01:11 PM
Bootstrap
Bug #5187 (Feedback): can't restore configuration
- Added multipart encoding to form
-
- Try to restore a config on diag_backup.php and you end up with:...
-
- needs patch is a closed status. I'll put this to assigned if Luiz wants to take a look, otherwise we could file a Fre...
-
- Luiz said he may give this a look since he has worked on bsnmpd in the past.
-
- This is a bug in the mibII module of bsnmpd on FreeBSD 10.x and is not specific to pfSense.
It happens even on a v... -
03:50 PM
Bootstrap
Bug #5189: vpn_openvpn_server dynamic input fields incorrect
- Applied in changeset pfsense:commit:27fc3a13e445f89003c23d43779a605f0172d030.
-
03:36 PM
Bootstrap
Bug #5189 (Feedback): vpn_openvpn_server dynamic input fields incorrect
- Actions modified to correspond with the list above
-
03:07 PM
Bootstrap
Bug #5189 (Resolved): vpn_openvpn_server dynamic input fields incorrect
- Fields are still not right...
"Enable authentication of TLS packets." = tlsauth_enable
"Automatically generate a... -
03:09 PM
Bootstrap
Bug #5138 (Closed): TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Most recent comments pertain to vpn_openvpn_server.php so have been moved to a new ticket: #5189
-
- Very nice!
-
03:00 PM
Bootstrap
Todo #5165: interfaces.php - Group 802.1x/RADIUS options into their own section
- Applied in changeset pfsense:commit:d65e45d3337915f27a1e8b744d949bce4fa7a8dd.
-
02:47 PM
Bootstrap
Todo #5165 (Feedback): interfaces.php - Group 802.1x/RADIUS options into their own section
- How's that?
-
-
- MFC'd to stable/10 and updated FreeBSD-src/devel, it should be OK on 2.3 too
-
01:59 AM Feature #4863: Add support for Sierra MC7355
- Confirmed working on pfSense 2.2.5 snapshots.
Thanks So Much -
- It never was a functional feature. We'll look at fixing it at some point, just not for 2.3.
-
09:21 AM Feature #3933: Limiter burst doesn't have any effect
- Does this mean that this is not going to be a feature anymore?
-
- Two subsequent commits were done to ensure that we ignore vouchers shorter than 5 characters (too short to be a valid...
-
- This was fixed on 2.3 last week by my commit:dda80e7602bd190667aa23ce371eb8c3925f6459
Safe to close this one. -
- On Diagnostics > Test Port, source address selection does not work when an IP Alias VIP is selected.
A fix has bee... -
- https://forum.pfsense.org/index.php?topic=73017.0
https://forum.pfsense.org/index.php?topic=73152.0
-
- Me & my collegues thought it would be useful to know how many leases are in use (without having to copy it to an exce...
-
- Pull requests have been merged. Thank you Phil!
-
-
- Thanks for testing and reporting back.
-
02:01 AM pfSense Packages Bug #4452: squid3 XMLRPC Sync
- Works again, Thanks
-
- I don't think any of these are actual problem with Squid. When you install it, the way the package is written and how...
-
- Klaus Steinberger wrote:
>
> We do run a DNS Server with IPV6 and DNSSEC. to complete the the tests on dnsviz.net... -
01:49 AM Bug #2762: PF drops IPv6 packets with fragment header followed by a last fragment only
- Chris Buechler wrote:
> the real world systems I'm aware of that exhibited this behavior no longer do, due to infras... -
- the real world systems I'm aware of that exhibited this behavior no longer do, due to infrastructure changes on their...
-
- fixed
-
- marking this resolved on target 2.2.5, started #5185 to cover 2.3/bootstrap.
-
- fixed
-
- Thanks Phil. This is good for 2.2.5.
For 2.3, since we're using pkg, that changes (as Renato mentioned on pull 19... -
- The underlying RADIUS pieces still don't support IPv6.
I believe this is the root cause of this issue.
https://... -
- Could you define "Some stuff need to be done to implement correctly and to handle it trough the UI" - what stuff?
-
- I removed the NTP bits from rc.newwanip(v6) as they should be unnecessary and appear to be the source of the issues h...
-
12:38 AM Bug #4378: editing one of multiple pppoe connections with dial on demand enabled changes port assignment
- ok thanks, ill test it out when 2.3 snaps start coming out
-
- Thanks Bipin, forgot you'd sent that already. I was able to replicate using that config.
Subject and original des... -
- works, thanks!
09/21/2015
-
- this is correct now.
-
- The fix above noted in "do control plane MTU tracking" is in 2.3/10-STABLE and works, which fixes this.
-
- Added input validation to work around this (and related issues Paul noted) since that's not a valid config anyway.
... -
- these are user-configurable as advanced options.
-
-
- fixed
-
- fixed
-
- I also show/hide fields based on Authentication selection.
-
06:20 PM
Bootstrap
Bug #5108 (Feedback): services_captiveportal.php "Authentication method" needs clean up
- Applied in changeset pfsense:commit:bc27554143e73d0eaab5efb0d24de352d9085da6.
-
- New pull request for RELENG_2_2 that should be bug free :) https://github.com/pfsense/pfsense/pull/1928
The master... -
- The Interface list on services_ntpd.php only lists virtual IPs, it's missing the usual assigned interfaces (WAN, LAN,...
-
- The time servers fields don't have a delete option, can only add more rows via "Add Server" button. It didn't have on...
-
- vpn_ipsec_phase1.php and vpn_ipsec_phase2.php have extra dividing lines at the bottom of the page. Screenshots attach...
-
- Reordering P2s on vpn_ipsec.php doesn't work right.
For instance, clicking the button to move to the bottom of th... -
- the images are fine here now, will open a new ticket for the reordering issues we just discussed
-
-
06:50 PM
Bootstrap
Bug #5155 (Feedback): broken images on vpn_ipsec.php
- Applied in changeset pfsense:commit:d62df86b7c65ca8de0c67053bf030954fdbc27af.
-
- still missing in most recent OpenVPN currently available, 2.3.8.
-
- fixed by upgrade to strongswan 5.3.3
-
- fixed
-
05:00 PM
Bootstrap
Bug #4978 (Feedback): service restart and stop icon images broken
- Applied in changeset pfsense:commit:eafd375aec8fb54dbb65dd145a4bcba91f2175f0.
-
05:36 PM Bug #5180: DDNS sometimes not updating after primary WAN failure
- Seeing what I think is a related (though different) issue in 2.2.4
DDNS set to monitor gateway group {WAN1_WAN2_FA... -
- Since update 2.2.2, DDNS (noip) is not updating the secondary WAN address after the primary WAN fails.
WAN1 and WAN2... -
- fixed
-
- Looks much better!
-
02:40 PM
Bootstrap
Bug #5179 (Feedback): Confusing grouping of items on vpn_openvpn_server.php and client after CSS changes
- Applied in changeset pfsense:commit:fbd9fabb0a86d8ed40047c52c8ad7719e7e9097d.
-
- After the CSS changes in #5170, the alternating background is splitting up some config fields that shouldn't be split...
-
- fixed
-
02:30 PM
Bootstrap
Bug #5021: can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Applied in changeset pfsense:commit:23eeaadf37e3894a692c4c40a399b2b95e37c690.
-
02:23 PM
Bootstrap
Bug #5021 (Feedback): can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Thanks for all the testing help.
Selector values were rived and queues now save correctly. -
- no change.
Access issue because of DNS rebinding not being excluded for domain on Steve's end, discussed elsewher... -
10:13 AM
Bootstrap
Bug #5021 (Feedback): can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- This control is unusual in that it saves two double-quotes to indicate the default value, rather than an empty string...
-
- fixed
-
- conversion looks good. Stats seem fine, needs a more thorough test case than what we have there which I'll setup and ...
-
02:39 PM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- status_queues now correctly displays the queue status (duh!) Test instance https://bootstrap-test1.pfmechanics.com/s...
-
10:58 AM
Bootstrap
Bug #5033 (Assigned): status_queues.php Not yet converted
-
10:58 AM
Bootstrap
Bug #5033: status_queues.php Not yet converted
- The converted file is in the repo, but I just looked it over and there is no way it is going to work, so hold off ple...
-
- fixed
-
02:31 PM
Bootstrap
Bug #5171 (Feedback): vpn_openvpn_server.php hide/display of "Local networks" fields backwards
- Redirect Gateway checkbox now hides/shows only the local settings. Remote settings remain in place per the server mod...
-
- That part works now, but now it also hides the "Remote network(s)" fields which is wrong. That checkbox should only h...
-
08:20 AM
Bootstrap
Bug #5171 (Feedback): vpn_openvpn_server.php hide/display of "Local networks" fields backwards
- Javascript logic corrected
-
- fixed
-
- This looks to have been resolved.
-
- Pull request has been merged
-
- Pull request has been merged. Thanks!
-
-
- Improvement made in changeset pfsense:commit:24e2d045499245571686ddf2d0e6d6bc27ab1eae
-
- Improvement made in changeset pfsense:commit:24e2d045499245571686ddf2d0e6d6bc27ab1eae
Fix applied in changeset pfsen... -
- the CSS change made improves things significantly. This page seems fine now.
The alternating background colors ha... -
- Fields are still not right...
Peer to Peer (SSL/TLS) Shows:
* "Enable authentication of TLS packets." (OK)
* "Au... -
- Looks like Steve Beaver fixed the action issues and I fixed the background color issue. Should just need to be reviewed.
-
- Fix for the background color issue is applied in changeset pfsense:commit:fbd9fabb0a86d8ed40047c52c8ad7719e7e9097d.
-
02:24 PM
Bootstrap
Bug #5138: TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Checkbox action resolved (per CMB) so passing hte display issue over to you.
-
- Closer, but there still appears to be a couple issues.
1) When set for an SSL/TLS type both "TLS authentication" a... -
08:00 AM
Bootstrap
Bug #5138: TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Applied in changeset pfsense:commit:ba9951c12caa153eda06b9e7783e2ec8e7b39b07.
-
07:47 AM
Bootstrap
Bug #5138 (Feedback): TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Javascript was simplified, fixed and commented so that I can understand it. Appears to be in agreement with 2.2 now.
-
- Pull request has been merged and cherry-picked to RELENG_2_2
-
- They all show now, thanks!
-
02:37 PM
Bootstrap
Bug #5178 (Feedback): status_interfaces.php - Only one interface is displayed
- Removed errant "break"
-
- On status_interfaces.php it should show output for every configured interface. Currently it only displays a single in...
-
- fixed
-
08:21 AM
Bootstrap
Bug #5172 (Feedback): vpn_openvpn_server.php shared key box shows when changing mode where it shouldn't
- Corrected as part of #5138
-
- fixed
-
11:00 AM
Bootstrap
Bug #5013: port forwards not adding linked rules
- Applied in changeset pfsense:commit:19fe55b3bff7d001835cfa6e9cd788ec4c79afe7.
-
10:48 AM
Bootstrap
Bug #5013 (Feedback): port forwards not adding linked rules
- Programmer had used incorrect element name (associated-rule-id vs filter-rule-association)
-
- fixed. 2.2.5 prevents an invalid ruleset, 2.3 and newer input validation prevents omitting IP from 6rd interface conf...
-
- fixed
-
09:30 AM
Bootstrap
Bug #5176: interfaces.php - 6rd configuration not working
- Applied in changeset pfsense:commit:c0c25504349e6c188f353336dded86972856c5b4.
-
09:16 AM
Bootstrap
Bug #5176 (Feedback): interfaces.php - 6rd configuration not working
- Corrected class name for he 6rd section
-
08:59 AM
Bootstrap
Bug #5176 (Assigned): interfaces.php - 6rd configuration not working
-
- I also tried to install squid3 on pfsense 2.2.4, but get this in the logs:
Sep 21 18:06:43 php-fpm[61548]: /pkg_mg... -
- Pull request has been merged. Thanks!
-
- Pull requestes have been merged
-
- I synchronized my VM again and now it worked. Somehow it must not have picked up this change the first try.
-
- I don't have a system setup with 2.3 just yet. I looked at the processing and the new bootstrap code still seems to p...
-
- The problem is still present on master (2.3), but appears to be fixed on 2.2.x.
-
- Pull requests have been merged. Thanks!
-
- Pull request https://github.com/pfsense/pfsense/pull/1923 for RELENG_2_2
Pull request https://github.com/pfsense/pfs... -
- Gone now. Thanks!
-
12:30 PM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:725f987f52d6d770d4d4ee522fa71eeb5790b13c.
-
12:19 PM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Mia culpa
if(ANTENNAS) condition corrected -
- The Antenna selection options are still showing up here for me when synced to master.
-
08:10 AM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:6dee9957d799f5d1254f80d8aa7149ccae1dfa72.
-
08:01 AM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Fixed and removed.
-
- Looks good to me now
-
12:30 PM
Bootstrap
Bug #5166: Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- Applied in changeset pfsense:commit:398814928d98d8d2e7b5d6da31e1228a8cf27dd9.
-
12:18 PM
Bootstrap
Bug #5166 (Feedback): Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- IP v6 addresses now shown
-
- Much better! Only one problem now, it does not display IPv6 addresses for the interfaces.
-
10:10 AM
Bootstrap
Bug #5166: Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- Applied in changeset pfsense:commit:389519adffccecb5d385fb528245038e58cc252e.
-
10:03 AM
Bootstrap
Bug #5166 (Feedback): Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- Programmer had used a variable that was never set
Icons were also broken (and fixed) -
- Added on 2.2.x.
Committed on FreeBSD HEAD, waiting to MFC it and it's going to reach 2.3 -
- Vast majority of the PRs I mentioned above and wasted about two days of my time with picking up on GitHub, redoing an...
-
- https://github.com/pfsense/pfsense/pull/1926 - fix interface assignment menus running off VGA screen
-
- https://github.com/pfsense/pfsense/pull/1923 - Redmine #5162 do not allow alias rename to an existing name - RELENG_2_2
-
- Yeah that's the expected behavior in this case. Thanks for the follow up!
-
- You're trying to add a route on a tap OpenVPN instance in a way that's not valid. That didn't change after upgrading.
-
- Looks good now. It shows up when it should and retains its value properly on save.
-
09:00 AM
Bootstrap
Bug #5175: vpn_openvpn_server.php - Authentication backend choice missing for Remote access types with auth
- Applied in changeset pfsense:commit:705ba8d55f3679bc9fca03e8c623ea592fc0420e.
-
08:55 AM
Bootstrap
Bug #5175 (Feedback): vpn_openvpn_server.php - Authentication backend choice missing for Remote access types with auth
- Added controls missing in original conversion
Simplified and tested Javascript show/hide code -
- This looks good now
-
08:20 AM
Bootstrap
Bug #5161: vpn_openvpn_server.php - Protocol selection missing
- Applied in changeset pfsense:commit:b66e45df261cd83e8a9d4aa8c6b59f72f9617c41.
-
08:17 AM
Bootstrap
Bug #5161 (Feedback): vpn_openvpn_server.php - Protocol selection missing
- Programmer had used incorrect array type in selector on the server page and I copied the error to the client page. Bo...
-
- Seems like that comment was meant for a different ticket than this one. This one still appears to be unchanged.
-
08:15 AM
Bootstrap
Todo #5165 (Feedback): interfaces.php - Group 802.1x/RADIUS options into their own section
- Programmer had used incorrect array type in selector and I had carefully copied/pasted the error to this file :(
-
09:36 AM Bug #4704: IKEv2 to Cisco ASA won't bring up multiple P2 networks
- I have also recently run into the same (frustrating) issue, and can provide testing once patch or 2.3 release is avai...
-
- Renato: I guess you forgot to press the "merge" button :) Still sitting unmerged on GitHub. (Same goes for the other ...
-
- Pull request has been merged
-
08:09 AM
Bootstrap
Todo #5146 (Assigned): services_dhcp.php not yet converted
-
08:09 AM
Bootstrap
Todo #5146: services_dhcp.php not yet converted
- My mistake. I thought this file was one of the three recently converted by Hari Subramani but it was not. I'll get to...
-
- Any further update regarding this issue?
-
- Pull request has been merged
-
- Pull request has been merged
-
- Pull request has been merged
-
- Pull request has been merged
-
- Pull request has been merged. Thanks!
-
- For example, this pull request makes some package file download timeouts bigger and improves a bit of error handling....
09/20/2015
-
- https://github.com/pfsense/pfsense/pull/1781 - Preserve MLPPP settings when saving interface settings (Bug #4568)
-
- https://github.com/pfsense/pfsense/pull/1922 - Move "Enable MSS clamping on VPN traffic" to System - Advanced - Firew...
-
- https://github.com/pfsense/pfsense/pull/1921 - Show openvpn interfaces while reassigning the interfaces for a restore...
-
- https://github.com/pfsense/pfsense/pull/1918 - GratisDNS support for hosts without subdomains
-
- https://github.com/pfsense/pfsense/pull/1916 - Fix Cloudflare support for Dynamic DNS Updates (Todo #4737)
-
- https://github.com/pfsense/pfsense/pull/1839 - DynDNS should allow "@" at hostname (Bug #3900); make no-ip.com round ...
-
- https://github.com/pfsense/pfsense/pull/1836 - Ignore DHCP pools that are out of range (if the user changes the subne...
-
- https://github.com/pfsense/pfsense/pull/1913 - pkg-utils.inc typo fix, typo causing useless junk leftovers in syslog ...
-
- There are multiple trivial fixes available for blatant bugs, just rotting in GitHub and getting periodic conflicts fr...
-
10:49 AM Bug #3726: Firewall Rule with Diffserv Code Point not matching properly
- I did replicate this on 2.2.4, but having looked at this again I now know what the problem is, and it's not a bug in ...
-
- https://github.com/pfsense/pfsense/pull/1922
-
- As noted at https://github.com/pfsense/pfsense/pull/1776#issuecomment-141786006 - this ain't IPsec-specific setting a...
-
09:18 AM Bug #5132: OpenVPN error after upgrade to 2.2.4
- I don't know if it is the right behavior but if I use TUN mode then it works finally, but if I set TAP mode then not....
-
- The patches in comment #7 are the patches against mpd CVS HEAD. I suggest using the patches against mpd 5.7, as that ...
-
- https://github.com/pfsense/pfsense/pull/1839
+ updated variant that just stops wasting time with unwanted sorts of h... -
- https://github.com/pfsense/pfsense/pull/1915 - master
https://github.com/pfsense/pfsense/pull/1916 - RELENG_2_2 -
- Robert Qbik wrote:
> If you want to add wildcard, you must type *.yourdomain.com, it's not working in pfSense becaus... -
- Resubmitted as:
https://github.com/pfsense/pfsense/pull/1911 - RELENG_2_2
https://github.com/pfsense/pfsense/pull/1... -
- Resubmitted as:
https://github.com/pfsense/pfsense/pull/1908 (master)
https://github.com/pfsense/pfsense/pull/190...
09/19/2015
-
06:05 PM Feature #4542: Support for PPPoE with MTU/MRU > 1492 (i.e. 1500)
- Included are the three patches to mpd. These are authored by Dmitry and David Wood (see upstream ticket).
Residual... -
- Though it adds little to the patches and commentary I've posted in the Sourceforge bug at https://sourceforge.net/p/m...
-
- There has been some changes in the upstream issue [[http://sourceforge.net/p/mpd/bugs/54/]] (patches and some testing...
-
- Yeah, so... the dropdown lists everything that's in the script (see https://github.com/pfsense/pfsense-packages/blob/...
-
- There are dozens more available in the web interface via the "command" drop down, ostensibly everything thats in /usr...
-
- The only commands defined and used in the *pfSense package* are listed here: https://github.com/pfsense/pfsense-packa...
-
- 1/ The patch appears incomplete at least regarding #2 - consider https://github.com/pfsense/pfsense-packages/blob/mas...
-
- fixed
-
- looks good
-
- fixed
-
- fixed input validation in 2.3
09/18/2015
-
- Change IPv6 type to 6rd on interfaces.php, and none of the 6rd config fields appear.
-
- this doesn't appear to happen on stock FreeBSD 11 unless there's something more to it than a single pass rule with ke...
-
- When set to "Remote Access (SSL/TLS+User Auth)" or "Remote Access (User Auth)" it should display a list of authentica...
-
- Looks good now
-
04:40 PM
Bootstrap
Bug #5163: vpn_openvpn_client.php - "Server host or address" field validation issues
- Applied in changeset pfsense:commit:d98c0efacf57a3c4ae4ceeee0f67301804ff36fc.
-
04:26 PM
Bootstrap
Bug #5163 (Feedback): vpn_openvpn_client.php - "Server host or address" field validation issues
- Fixed typo in element name
-
- A valid IP address or hostname in an OpenVPN client "Server host or address" field is rejected. The input validation ...
-
- The value should be the same as the text, seems to be numeric now. Actually, now that I look it's like that on the cl...
-
04:30 PM
Bootstrap
Bug #5161: vpn_openvpn_server.php - Protocol selection missing
- Applied in changeset pfsense:commit:0598717ebc555b57e069e78222c10e4d3281ba76.
-
04:23 PM
Bootstrap
Bug #5161 (Feedback): vpn_openvpn_server.php - Protocol selection missing
- Added missing element
-
- On vpn_openvpn_server.php there should be a protocol choice for TCP or UDP when editing a server in any mode. It's pr...
-
- That's probably a good move, though if the framework has a general issue with the scenario it may still come back to ...
-
- Jim T. said the antenna selection is of no use anyway, so should just remove it, then this can be closed out.
-
- It defaults to "default" now, but when manually set to auto, it still marks default as selected. I know PHP is pretty...
-
04:30 PM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:87c59979a0624f3ea0ee1ae900b06bcd7e50c98e.
-
04:11 PM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Thanks for your help in finding this!
It was an obscure issue in the Select.class.php framework file wherein '' ==... -
- Before adding the interface it did not exist in config.xml at all and there was nothing in in the wireless tag.
As... -
03:01 PM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- If $pconfig['txantenna'] is not set, the selector value is null, and the null array element is 'Default'.
Would yo... -
- On a fully up-to-date system with a wireless card, it's still defaulting to Auto for me.
-
- [2.2.4-RELEASE][root@firewall]/usr/pbi/nrpe-amd64/libexec/nagios: ./check_sensors
SENSORS UNKNOWN - command not fou... -
- Looks OK now
-
04:30 PM
Bootstrap
Bug #5164: interfaces.php - "Minimum wireless standard" option mislabeled on a card with only 802.11g support
- Applied in changeset pfsense:commit:109ebe80eaa9258c5cabfea764a24c245013bf7b.
-
04:18 PM
Bootstrap
Bug #5164 (Feedback): interfaces.php - "Minimum wireless standard" option mislabeled on a card with only 802.11g support
- Removed as requested
-
- When a card only has 802.11g support, the "Minimum wireless standard" option switches to "802.11g Only" which is OK, ...
-
- another good example of a page with a ton of excess whitespace. Comparison attached.
-
- that works on Windows, Mac and Linux now, looks good.
-
- should be possible, and a good idea, to list VIPs in the binding list.
As a workaround, can just bind it to localh... -
- P.S. If you want your "HA"/"failover", then stick...
-
- Dude. The XMLRPC feature was NEVER intended to do any HA. It's (like in tons of other packages) used to sync configur...
-
02:56 PM pfSense Packages Bug #5168 (Resolved): squid doesn't function during/after HA failover
- Per #2591, there is no spported way for squid to listen to a CARP VIP interface.
This means that HA isn't really HA ... -
- fixed
-
- Go to vpn_openvpn_server.php, add new.
Change "Server mode" drop down to any other option. Upon clicking the "Ser... -
- fixed
-
- The fields "IPv4 Local networks" and "IPv6 local networks" should be shown when "Redirect Gateway" is un-checked, and...
-
- fixed
-
- fixed
-
- not sure where that is to test
-
- still not adding associated rules
-
- not completely broken which is what this was referring to, this fixed.
-
- none option exists now. But it doesn't save as such when you select that option, and it doesn't default to that for n...
-
- Attached screenshots some examples of excessive white space we discussed, these on firewall_rules_edit.php.
-
-
- Close this bug. The currently used squidguard-squid3-1.4_7-$arch.pbi packages on 2.2 are signed just fine. (And the s...
-
- @Steve? Eh???
-
- Adam Thompson wrote:
> I can't even find the file in the github repo; is this an upstream bug?
No, it's not. http... -
03:20 PM
pfSense Packages
Bug #5169 (Feedback): /etc/rc.haproxy_ocsp.sh emits an extra blank line, causing cron to email that output
- Applied in changeset pfsense:commit:f92c948e12637b6f83da00b8581bcfc5a1032bde.
-
- In haproxy-devel v0.30, /etc/rc.haproxy_ocsp.sh contains an extra blank line, causing php to emit it, which causes cr...
-
- Looks good now, thanks!
-
03:11 PM
Bootstrap
Bug #5160 (Feedback): Packages menu entries ignored
- Corrected as noted. Thanks!
-
- Seems to be using the name of the package for the menu entry and not the name tag inside the menu tag.
For example... -
03:00 PM
Bootstrap
Bug #5160: Packages menu entries ignored
- Applied in changeset pfsense:commit:da4a4b9f556c3b374c361513684ad4ca4c44ffcc.
-
02:44 PM
Bootstrap
Bug #5160 (Feedback): Packages menu entries ignored
- head.inc now extracts the package config file name from config.xml and parses that file to obtain the menu informatio...
-
- After install 'System Patches' I noted the menu item "System -> Patches" were missing. The <menu> entry is present in...
-
- Closing this out for now.
There doesn't seem to be a reliable cross-platform way to stop browsers from filling in ... -
- The XMLRPC sync is there to synchronize configuration. You will NOT get any failover with Squid, as already explained...
-
- That's nice, but nothing in that thread addresses the problem; JimP completely missed the point. And I believe you'r...
-
-
- Please, read this post (and the entire thread there): https://forum.pfsense.org/index.php?topic=46067.msg256634#msg25...
-
- https://forum.pfsense.org/ -> there. (And certainly absolutely NOONE wants a collection of screenshots in huge PDF.)
-
- I can confirm that only some of the packages got reinstalled, despite the lack of any error message.
-
- Probably not worth diagnosing at this point (and certainly not in a discussion here on redmine) -- the package system...
-
- Adam Thompson wrote:
> Whoops, let's try that PDF again...
Can't upload it anyway, max file size is 5MB and there... -
- Kill Bill wrote:
> Diagnostics - Backup/Restore - Clear Package Lock button.
>
> (Certainly not going to download... -
- Whoops, let's try that PDF again...
-
- Diagnostics - Backup/Restore - Clear Package Lock button.
(Certainly not going to download "screenshots" in PDF.) -
- That just means one of the package reinstallation routines stopped. Info should be in logs. Post on the forum for mor...
-
- After upgrading 32-bit 2.2.2 to 2.2.4, I get the "packages are currently being reinstalled in the background" warning...
-
- Care to tell us what's exactly wrong with the value being set to off when required by user configuration?
https:/... -
-
- Forgot the code reference: https://github.com/pfsense/pfsense-packages/blob/master/config/squid3/34/squid.inc#L2228 a...
-
- This is not a problem, this is by design. NAT is used to redirect the traffic to localhost. Suggested change is just ...
-
- subject isn't desirable. #4989 covers what will properly accommodate that circumstance.
-
02:21 AM Todo #5158: Mobile IPSec Phase 2 tunnel configuration option needed
- Either one or both approaches should be enabled as currently setting remote peer address to "%any" isn't supported fr...
-
- The interfaces widget on the dashboard should display the configured or obtained IPv4 address and IPv6 address for ea...
-
-
- Eh, kindly close this. The bug referenced above regarding service start has been fixed and this one is just utterly u...
-
- https://github.com/pfsense/pfsense-packages/pull/1073
Fixed by removing the broken option which doesn't work anywa... -
- This appears to be working properly now
-
- It would be nice to have the 802.1x RADIUS options (IEEE802.1X, Primary 802.1X server, Secondary 802.1X server, Authe...
-
- Seems to start/stop OK now, though I had to manually edit the backend config due to #5161 and #5163
-
-
- If you create two aliases and rename the second one to the same name as the first, it is allowed by the GUI but obvio...
-
- Still a couple problems here:
1) "Peer Certificate Authority" and "Peer Certificate Revocation list" should be hid... -
- Better late than never. https://github.com/pfsense/pfsense-packages/pull/1075
-
- Looks good now, thanks!
-
- Applied in changeset commit:28909627356ebbd5930939f08450b8315313885f.
-
- Fixed in System Patches 1.0.6
commit:28909627356ebbd5930939f08450b8315313885f -
- https://github.com/pfsense/pfsense-packages/pull/1073
Stupid typo. -
- Perhaps, upstream boys could just fix the config file parsing idiocy instead of "documenting" on on mailing lists? If...
-
- I already told you to use Squid3 + C-ICAP to replace HAVP on another bug your filed.
-
05:52 AM pfSense Packages Bug #5157: HAVP 1.09 - Log tabs give 404, daemon mode doesn't work
- I am not using the daemon mode and I don't need it either. The amount of times this needs to be said is ZERO and for ...
-
- Pull request for master:
https://github.com/pfsense/pfsense/pull/1904
09/17/2015
-
04:10 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Applied in changeset pfsense:commit:d0613e4fb399a61355761bb07efa3a8a229eb707.
-
03:53 PM
Bootstrap
Bug #5099 (Feedback): firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Destination ports now behave as required.
If Source ports already contain a value, they should be shown without ha... -
03:39 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- First item is covered in bug #5045 so I'd like to continue to keep it separate and not just for this page.
Glad th... -
- The source port behavior is better, but the destination ports have gone missing.
So two problems now:
* If Source... -
01:30 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Applied in changeset pfsense:commit:b22368535d6c9781b30b33a23b4d1c4b4d4c9360.
-
01:24 PM
Bootstrap
Bug #5099 (Feedback): firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Javascript logic changged for source port display "Advanced" button now has toggle acton and its state survives a pro...
-
-
- So don't use the daemon mode. Dunno how many times this needs to be said - HAVP is completely abandoned upstream, noo...
-
- Log tabs in HAVP give 404.
In Daemon mode, AV starts but av proxy hangs (waiting for ClamD) then stops.
-
- There was a bug while restoring vouchers with incorrect data or without any data at all. The bug has been fixed.
-
09:07 AM
Bootstrap
Bug #5159 (Closed): Javascript refactoring
- The Javascript functions hideInput, disableInput, hideClass, addRow, delRow et al have been replicated across dozens ...
-
- Using "mobile" for site-to-site is probably the wrong way to accomplish this. More likely you want the ability to set...
-
- Pfsense UI doesn't allow in configuration to define the Remote Network (rightsubnet) when having mobile support enabl...
-
08:50 AM
Bootstrap
Bug #5153: firewall_rules_edit.php
- Applied in changeset pfsense:commit:860caa2fe545036685c1225be82d538fb40b1341.
-
08:44 AM
Bootstrap
Bug #5153 (Feedback): firewall_rules_edit.php
- Notes:
* The addGlobal() method is applicable to a form, not a section
* 'hidden' elements should not specify a lab... -
- Pull requests have been merged. Thanks!
-
08:10 AM
Bootstrap
Bug #5147: interfaces.php DHCP presets not working
- Applied in changeset pfsense:commit:34ab580d87d145b95035cdd607d28dc25dea2e20.
-
- Pull request has been merged on master and RELENG_2_2. Thanks!
-
03:29 AM Bug #4210: Bring back a FTP proxy
- You're talking about the "FTP Client Proxy" package in the related section of the latest version of PFSense, right ?
... -
03:22 AM Bug #3733: Certificate manager doesn't allow wildcards in Subject Alternative Names
- I've now registered for the ICLA (Username: dachande) and just created a new pull request @ https://github.com/pfsens...
-
- works
-
-
- fixed
-
- Similar issue to #4300 but for natport field.
-
- fixed
-
- fixed
-
- i already did the last time
-
- where's that converted file to test?
-
- This is probably caused by having some other service configured on port 10000. If not, it's #4642
-
- The images on vpn_ipsec.php for "move selected phase2 entries to end", "add phase2 entry" and "delete selected phase2...
-
- fixed
09/16/2015
-
- Yeah it was easier to fix the way I did it. I know we've had some back-and-forth with how to order those operations i...
-
- Commit for RELENG_2_2 is https://github.com/pfsense/pfsense/commit/2c42910ad782aeea24991e697716398c498794cf
-
- Oh - I see you did the other way around - call local_user_set_groups() twice. That should work also.
Note that is c... -
- I guess that after local_user_set_groups() it should then do something from local_user_set() again to make whatever i...
-
- Seems to be caused by commit:5372d26d9d25d751d16865ed9d46869d3b0ec5e1 -- chicken-and-egg problem with users and groups.
-
- Tested on 2.2.4 and 2.3, problem exists on both.
-
- Assigning a group with SSH privileges to a user does not properly enable SSH when the account is created.
When add... -
-
- Yes, that was RELENG_2_2 only. At the time the package system code was actively being worked on by Renato in master, ...
-
- though that was on RELENG_2_2 only, was that fixed separately in master, or am I missing another pull request?
-
- Pull request merged, thanks!
-
- works
-
08:10 AM
Bootstrap
Bug #5151: mask not configurable for CARP and IP alias VIPs
- Applied in changeset pfsense:commit:66513c5a40dab03961ce16d0ec065e3db08e4cf3.
-
07:56 AM
Bootstrap
Bug #5151 (Feedback): mask not configurable for CARP and IP alias VIPs
- JS revised to allow subnet bits on CARP and IP Alias
-
- You can already 'pkg install vpnc' on 2.2.x. It just uses a tun interface, which should then be assignable. vpnc isn'...
-
- the functionality in question doesn't work at all in 2.2.x. Closing this in favor of #4276
-
- Thanks Phil.
-
- The PR for master that was merged: https://github.com/pfsense/pfsense/pull/1826
and for RELENG_2_2: https://github.c... -
-
-
- Thanks Daniel. Merge request won't cleanly merge anymore, added a note there. If you can get an ICLA on file and subm...
-
- root cause of original issue is #4653, since fixed
-
-
- Gerald: could you provide your pre-upgrade config, or some further details, like what interfaces are you referring to...
-
-
- thanks, thought it sounded familiar
-
- Duplicate of https://redmine.pfsense.org/issues/4508
-
- any guidance please?
-
- think this may be related to some edge case where dhcpleases runs multiple times, though I'm not seeing how that coul...
-
07:09 PM pfSense Packages Bug #5154 (Resolved): squid3 - min/max_object_size directives out of order in config and not applied to cache_dir
- The minimum_object_size and maximum_object_size directives apply to any following cache_dir directives in the squid.c...
-
- duplicate of #4479
-
- root cause in #4931
-
- can't replicate any issues here. Change the LAN IP and DHCP scope at the console, and it immediately hands out IPs fr...
-
- looks like PCI bus issue in FreeBSD PR 196501
-
- issue is in Android/racoon
-
- root problem is #4931
-
-
- this is fixed in 2.3 since the upgrade system's been replaced
-
- seems specific to certain combinations of hardware, and doesn't appear to be in anything we're doing.
-
- I briefly removed this ~3 months ago, and reverted it after realizing that's not correct. It is possible to configure...
-
- please send to cmb at pfsense dot org.
-
- this was fixed
-
- was fixed in 2.2.4
-
- that change will make strongswan 5.3.3 which should be coming soonish. Should be fine to wait until its release.
-
-
- The FTP proxy package should suffice for those who need a FTP proxy.
-
- should be fixed in 2.3 as part of this.
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=164475 -
- sbeaver added that in Bootstrap
-
03:14 PM
Bootstrap
Bug #5153 (Resolved): firewall_rules_edit.php
- Page is broken and produces PHP error
-
03:10 PM
Bootstrap
Bug #5013: port forwards not adding linked rules
- Applied in changeset pfsense:commit:798b88f06b7816c7e5277bd75b6845ff95e47a1e.
-
03:05 PM
Bootstrap
Bug #5013 (Feedback): port forwards not adding linked rules
- Fixed selector value to save associated rule
-
02:30 PM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- File was converted by Hari Harasubramani and is ready to test. I have not tested it yet.
-
01:47 PM
Bootstrap
Bug #5033 (Assigned): status_queues.php Not yet converted
-
02:30 PM
Bootstrap
Todo #5146 (Feedback): services_dhcp.php not yet converted
- File was converted by Hari Harasubramani and is ready to test. I have not tested it yet.
-
08:28 AM
Bootstrap
Todo #5146: services_dhcp.php not yet converted
- This page has not yet been converted.
-
01:50 PM
Bootstrap
Bug #5148: interfaces.php DHCP field display issues
- Applied in changeset pfsense:commit:910b77ad1682740e481df29fc2d9c528a13c2da4.
-
01:42 PM
Bootstrap
Bug #5148 (Feedback): interfaces.php DHCP field display issues
- Javascript updated to provide required functionality
-
12:40 PM
Bootstrap
Bug #5138: TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Applied in changeset pfsense:commit:d5ad40881c0964108a4a70a9864dc2be86058234.
-
12:30 PM
Bootstrap
Bug #5138 (Feedback): TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Fixed javascript
Added missing client cert control -
- Ok thanks. If you come up with a means of replicating, please report back.
-
08:34 AM Bug #4933: Vlan interfaces created in web ui show up in ifconfig but don't show up in the UI.
- Well, I went to try to reproduce the problem again and now the vlan is showing up. Weird. Well, this can be closed ...
-
11:30 AM
Bootstrap
Bug #5142: Certificate, TLS, shared key, redirect gateway field issues on vpn_openvpn_server.php
- Applied in changeset pfsense:commit:bca536077c5efc91075e7da0da17eed741cf1940.
-
11:18 AM
Bootstrap
Bug #5142 (Feedback): Certificate, TLS, shared key, redirect gateway field issues on vpn_openvpn_server.php
- All issues corrected
-
- Works now, thanks!
-
07:44 AM
Bootstrap
Bug #5139 (Feedback): system_usermanager.php - Deleting a user has no effect
- Corrected GET/POST error
-
09:50 AM
Bootstrap
Bug #5141: vpn_openvpn_server.php tap options missing
- Applied in changeset pfsense:commit:b085759d162462466a4b555ec4892636b0231605.
-
09:36 AM
Bootstrap
Bug #5141 (Feedback): vpn_openvpn_server.php tap options missing
- From the page logic it looks like those input are shown:
if tunneltype == TAP AND if servermode != peer-to-peer
... -
09:20 AM
Bootstrap
Bug #5145: services_captiveportal_ip.php missing directional indicator
- Applied in changeset pfsense:commit:881c7fe70cb8a66ec1255aca55df807d84c8892c.
-
09:07 AM
Bootstrap
Bug #5145 (Feedback): services_captiveportal_ip.php missing directional indicator
- Direction value was not being saved in config
-
09:00 AM
Bootstrap
Bug #5143: vpn_openvpn_server.php "Inter-client communication" missing checkbox
- Applied in changeset pfsense:commit:54885c789240f4bf4a20d6a0d11dd199cd7361e5.
-
08:46 AM
Bootstrap
Bug #5143 (Feedback): vpn_openvpn_server.php "Inter-client communication" missing checkbox
- hideInput -> hideCheckbox
Checkboxes require special handling to show/hide -
08:33 AM
Bug #4642: OpenVPN process status stopped... but its running
- I have a similar, if not the same, problem running a 2.2.4 cluster in Carp Mode w/ Gateway Group. My OpenVPN instance...
-
08:22 AM
Bootstrap
Bug #5150 (Feedback): Duplicating load balancer pool creates empty disabled member
- serversdisabled list filtered to remove blank entry
-
- Lest anyone think that this problem is unique to my one machine...
Since submitting this bug report, four more peo... -
- Working on that one
-
-
07:40 AM
Bootstrap
Bug #5147: interfaces.php DHCP presets not working
- Applied in changeset pfsense:commit:f438135364e7e4d5713c0a44399b1cb166255f25.
-
07:24 AM
Bootstrap
Bug #5147 (Feedback): interfaces.php DHCP presets not working
- Added Javascript to provided that functionality
-
- OK, merged. Did uninstall, followed by a couple of reinstalls, the reinstalls work fine, all settings preserved, pass...
-
06:45 AM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- Alberto Iglesias wrote:
> In this last case are cable connections (30M/6M). Routers with NAT and DMZ configured poin... -
06:41 AM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- In this last case are cable connections (30M/6M). Routers with NAT and DMZ configured pointing to the pfsense interfa...
-
- Alberto Iglesias wrote:
> New installation with 2.2.4 and two wan connections, and same problem. In this case also w... -
- New installation with 2.2.4 and two wan connections, and same problem. In this case also with two LANs, each one with...
-
-
- this is probably something that's been fixed in a newer base OS version in the mean time.
Oliver, this still some... -
- this was fixed long ago
-
- Bill: if you could update for bootstrap (current master) and put in a pull request, we can review there and get it me...
-
- can you still replicate in 2.2.4?
-
- this still happen on 2.2.4?
-
- this is fixed in 2.2.x versions.
-
- duplicate of #1819
-
-
- merged, thanks! Leaving for feedback
-
- wouldn't have to re-create everything in that circumstance, could just manually edit the config to change the order. ...
-
- this change looks fine but would like confirmation
-
- Not seeing how that could happen. Not replicable in a similar config. Maybe your VLANs are interconnected somehow so ...
-
- The route-to is for multi-WAN purposes. It sounds like it has some impact on things in this case. I'll see if I can r...
-
-
- Anything initiated from the firewall itself (squid, other possibilities) doesn't hit reflection. It's more complicate...
-
- this was fixed some time ago
-
- I don't think this is a bug, along the lines of what Michael mentioned in the last comment.
Alex: can you still r... -
- Agree, this is zero care factor and the method of rendering and CSS will all be different with the Bottstrap stuff.
-
- issue won't exist in the same way at least in Bootstrap version so won't fix this, if you notice an issue there let u...
-
- I recall an issue along these lines that was fixed in 2.2.x. This something you can replicate on 2.2.4?
-
- Note: The eventual pull request for master was https://github.com/pfsense/pfsense/pull/1824
That was merged to maste... -
-
- fixed, thanks
-
-
- closing this in favor of #4133
-
- we haven't changed anything. That circumstance, if you search on it, is common to scenarios where you blast Dyn with ...
-
12:58 AM Bug #4894: rc.dyndns.update is missing to update one or two entries from <dyndnses></dyndnses>
- The consequence by this statement would be a) that Dyn has changed their policy without a communication at all and b)...
-
-
- fixed, thanks for the report.
Also available in: Atom