Activity
From 08/27/2015 to 09/25/2015
09/25/2015
-
07:29 PM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- I went through and re-tested multi-WAN in general on 2.2.5 (which is the same as 2.2.4 in that regard) and it fails o...
-
- There have been major changes here since the initial report. Please re-test on 2.2.4 and report back if it's still an...
-
- done 2+ years ago.
-
- completed ~2-3 years ago.
-
- This was implemented a while ago, everything that's possible to configure in dhclient is configurable.
-
-
- this was added quite some time ago.
-
- PPTP is dead and gone in 2.3
-
-
- if you have a replicable set of steps for what you mentioned there, please start a new ticket with an attached exampl...
-
-
- duplicate of #4191
-
- same as #3802
-
- also breaks config backup/restore as noted in #4641
-
- #4360 covers part of this, the remainder covered by the change from start to route pre-2.2.0
-
- we disabled this by default in AWS starting with v2.2.4
-
- to Luiz to review pull request (which we'll need to move to 2.3 or have it re-submitted to https://github.com/pfsense...
-
- the cause of this is the interface binding, which has been fixed in #4908
-
- fixed
-
- unsupported version
-
12:30 PM
pfSense Packages
Bug #5205: squid General Tab configuration can't be saved
- pfSense 2.2.4 with squid (either version 2 or version 3) is buggy.
I had to correct startup scripts in order to ge... -
11:43 AM pfSense Packages Bug #5205: squid General Tab configuration can't be saved
- Please, use pfSense versions and package versions that are actually maintained. pfSense 2.1.5 and Squid 2.7.9 are not...
-
06:15 AM
pfSense Packages
Bug #5205 (Resolved): squid General Tab configuration can't be saved
- Installed pfSense 2.1.5 with
* squid 2.7.9 pkg v.4.3.9
Only configured LAN IP address to access GUI.
Go to Syste... -
- todo is complete, we'll open bugs separately if there are issues.
-
03:27 PM Todo #4578 (Feedback): Create a tool to update base system
- pfSense-upgrade done, it uses pkg to upgrade everything
-
- all the DH group values confirmed working in 2.2.5
-
- todo is complete, we can open bugs if it introduced any issues.
-
- All xmlrpc calls were removed
-
- that was a hold over from m0n0wall still. Better now, thanks!
-
- Pull request has been merged. Thanks!
-
- this is fine with the exception of #5200 which we'll address there.
-
- looks good to me, tests out fine. Jim P confirmed as well
-
- confirmed fixed by what JimP linked.
-
- fixed, thanks!
-
-
02:44 PM Bug #5207 (Resolved): Hybrid RSA + xauth doesn't appear to configure strongswan correctly for hybrid auth
- When selecting "Hybrid RSA + xauth" as the authentication mode for an IPsec phase 1 SA on a remote access (mobile) VP...
-
- pfSense-upgrade fetches all updates before reboot, and finish the process during boot.
-
- Done
-
03:50 PM Feature #5186: dhcp lease counter on status_dhcp_leases.php
- created an additional pull after someone asked me to add an 'interface' column to the lease_counter table.
i stumble... -
- Almost everything was committed, other cases like missing CLA will be handled on github
-
- We need to have a mechanism to sign packages when they go from beta to final repo, and also a public key need to be a...
-
- Backend is done,
Steve is going to plan how it will interact with GUI -
01:53 PM
Bootstrap
Todo #5206: Convert package UI pages to Bootstrap
- Most of pkg_edit.php has been converted and the page is reasonable functional, though not complete. The output looks ...
-
01:48 PM
Bootstrap
Todo #5206 (Resolved): Convert package UI pages to Bootstrap
- Most packages use the pkg_edit.php page to generate a UI page from an XML file. pkg_edit.php reads the xml specificat...
-
- this is covered by the general errata listing for the slow rw->ro mounts on some flash
-
10:16 AM Bug #5200: Invalid DHCP Pool notice is a tad too aggressive
- See pull request https://github.com/pfsense/pfsense/pull/1935 for a possible solution to this.
Actually in theory ... -
- After running the wizard and changing the LAN IP it calculates a new DHCP range for LAN. Then I get 3 notices about "...
09/24/2015
-
- will leave for testing confirmation.
Thanks Jeroen! -
- this can probably be closed, 1932 has been merged.
thanks all -
- update:
the pull above is for releng 2_2
this one is for master: https://github.com/pfsense/pfsense/pull/1932
-
12:20 PM
Bootstrap
Bug #5189: vpn_openvpn_server dynamic input fields incorrect
- Applied in changeset pfsense:commit:97508a552c616b0f3c7569e54a017d53c5cd94f6.
-
12:15 PM
Bootstrap
Bug #5189 (Feedback): vpn_openvpn_server dynamic input fields incorrect
- This logic is enough to drive a person to drink.
I have made a truth table and re-coded the page to correspond to ... -
11:43 AM Bootstrap Todo #5204: Clean up jquery sections at the bottom of pages
- The common functions should also be moved to a central file.
-
- There is inconstant comment and code structures that need to be cleaned up so that it is coherent when making future ...
-
10:37 AM Bug #5203 (Resolved): Directory transversal in Configuration History
- getcfg parameter doesn't filter chars with as .. or / this way an admin can retrieve other XML files from the system....
-
10:30 AM Bug #5201 (Feedback): Stored XSS on authentication services
- Please re-test on a 2.2.5 snapshot from https://snapshots.pfsense.org/
I believe we have already fixed this after ... -
- Seems like encoding on this bugtracker breaks the payload, I'm attaching an image that shows what to type.
-
- To reproduce the cross-site scripting:
1. Go to https://localhost:9090/system_authservers.php?act=new
- on fie... -
- Running through the setup wizard on 2.2.5 results in multiple notices about an invalid DHCP pool before the wizard fi...
-
- Applied in changeset commit:83b48b440146be346e0b05ab6e42d82dc31b34c8.
-
- Applied in changeset commit:0b74438e962ead448d144f7f246f599efe01c7a9.
-
- The change made in commit:9fbcedee3b1c8e629d92a3546bf79d81ec90dca3 to improve handling of default values in package f...
-
09:10 AM
Bootstrap
Bug #5192: can't add gateway groups
- Applied in changeset pfsense:commit:acdc7fd6064827ee1e0e56bf44a8ae2e2fb75626.
-
08:58 AM
Bootstrap
Bug #5192 (Feedback): can't add gateway groups
- Element names corrected
-
- When saving a new gateway group with valid parameters on system_gateway_groups_edit.php, you end up with an input val...
-
09:03 AM
Bootstrap
Bug #5188 (Resolved): vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- P Davis clarifications merged. Thanks!
-
08:00 AM
Bootstrap
Todo #5146: services_dhcp.php not yet converted
- Applied in changeset pfsense:commit:8a73f4072e982799ddcb00e260d60fa7f549e798.
-
07:48 AM
Bootstrap
Todo #5146 (Feedback): services_dhcp.php not yet converted
- File converted and unit tested. Ready for review.
-
- Any luck with building the new PBIs incl. fonts yet?
-
- https://github.com/pfsense/pfsense/pull/1933 has been committed to RELENG_2_2.
sbeaver-netgate has been asked to mak... -
- Pull request for RELENG_2_2 https://github.com/pfsense/pfsense/pull/1933 - assuming what I am reporting here is valid...
-
- 1) After the advanced options and save button, and before the static mappings table, this text is shown:
--------
N... -
05:32 AM Bug #5198 (Duplicate): DHCP Relay Issue w/Unicast DHCP Requests
- We have multiple pfSense-Firewalls in a failover configuration on VMWare. We use CARP so we have configured VMWare ac...
-
- Pull request has been merged, thanks!
-
- https://github.com/pfsense/pfsense-packages/pull/1079
-
- Cannot reproduce any such problem unless I don't select anything in Client forward options. Select something there an...
-
- So you don't have antivirus enabled, or what? (Please, use the fine "pre" button to post code, the above is unreadabl...
-
01:46 AM pfSense Packages Bug #4663: pfsense 2.2.2-RELEASE + squid3 + squidGuard = Breaking squid.conf when using c-icap
- OK let me be more specific
function squid_resync_antivirus() {
global $config;
if (is_array($config['installed... -
02:12 AM Bug #5197 (Duplicate): WebUI: Shaper Wizard is very slow to configure on Embedded
- When walking through the Traffic Shaper Wizard (either option) on Embedded, each individual step takes longer than ex...
-
- The main thing people liked about the old widescreen package is having more than 2 columns of widgets in the dashboar...
-
- the remove button should be replaced with an X, similar to what's in 2.2.x.
-
- Some pages, like reboot.php and halt.php (and I'm guessing others), prompt for confirmation with "Are you sure you wi...
09/23/2015
-
- closer after what I just pushed. CURLOPT_INTERFACE still needs fixing to not try to bind to optX_vipY interfaces.
-
10:00 PM Feature #4542: Support for PPPoE with MTU/MRU > 1492 (i.e. 1500)
- A pull request for the kernel and mpd5 changes has been submitted - https://github.com/pfsense/pfsense-tools/pull/12
... -
- fixed
-
- fixed, thanks!
-
- fixed, thanks
-
- please post to the Spanish board on the forum.
https://forum.pfsense.org/index.php?board=10.0 -
03:13 PM Todo #5191 (Rejected): Port Forward - Pfsense 2.2.4
- Hola, tengo un problema al realizar port forward de un puerto udp en el cual recibo 30 paquetes por segundo en promed...
-
- Much better but still one small state problem.
If you have the "Automatically..." box unchecked so it shows the la... -
- We already have a "standard" URL for them on the doc wiki:...
-
- this works for 2.2.5. In 2.3, there aren't any individual files to fetch so that's a non-issue.
Thanks Phil! -
- Yeah, it obviously will never work without the required include file. This is not a place to get support, move to for...
-
10:05 AM pfSense Packages Bug #4857: Cannot install squid3 on pfsense 2.2.3
- If I try to install squid3 via the command line I get the following error:
pfSsh.php playback installpkg "squid3"
... -
- I don't even get menu item or service entry for squid, so that I cannot even resave squids config. I guess it happens...
-
- The latest code in pfsense/master looks like it should be working.
I made pull request https://github.com/pfsense/pf... -
- I wish I could edit my posts on Redmine!!!
The UI box "Auto-exclude LAN address" asks for "Enable bypass for LAN i... -
- The UI box "Auto-exclude LAN address" asks for "Enable bypass for LAN interface IP". That is the reverse question to ...
09/22/2015
-
10:13 PM Feature #5190 (Resolved): Include scponly package as part of the base
- Request to add *scponly* package as part of the base configuration instead of having to:
pkg install scponly
Th... -
06:21 PM
Bootstrap
Bug #5188: vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- Yeah. The code contains this:
// The logic value sent by $POST is opposite to the way it is stored in the config... -
- most of this is good, and good catch on the 2 missing fields.
One issue still: The setting/unsetting of the confi... -
02:40 PM
Bootstrap
Bug #5188: vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- Applied in changeset pfsense:commit:7e4abf2603554b8977f492f4e0565f622eb3ebce.
-
02:33 PM
Bootstrap
Bug #5188 (Feedback): vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- New fields added and tested
-
02:12 PM
Bootstrap
Bug #5188 (Assigned): vpn_ipsec_settings.php "Auto-exclude LAN address" changes lost
- Three new fields need to be added:
# CRL Checking
# Make before Break
# Auto-exclude LAN address -
- The changes to rename field, update description, and fix check/uncheck of "Auto-exclude LAN address" field (as labele...
-
- fixed
-
01:20 PM
Bootstrap
Bug #5184: services_ntpd.php missing interfaces
- Applied in changeset pfsense:commit:d05950fbcbce449ad3e3ad1b4a1d991a590efc02.
-
01:06 PM
Bootstrap
Bug #5184 (Feedback): services_ntpd.php missing interfaces
- Fixed incorrect array index
-
- fixed
-
01:00 PM
Bootstrap
Bug #5183: services_ntpd.php missing delete row option
- Applied in changeset pfsense:commit:f4439c0066f188b7b56e8322ed0b43d1742810f5.
-
12:56 PM
Bootstrap
Bug #5183 (Feedback): services_ntpd.php missing delete row option
- Table row system revised.
-
11:56 AM
Bootstrap
Bug #5183 (Assigned): services_ntpd.php missing delete row option
- Page should be converted to our PHP table library which will provide the delete functionality.
-
- those are fixed. haven't seen any others that have the same issue, will start a new ticket if there are others
-
- Fixed these three pages. Changing to feedback until more are found.
-
- also on diag_backup.php
-
- fixed
-
01:20 PM
Bootstrap
Bug #5187: can't restore configuration
- Applied in changeset pfsense:commit:3beeb66a86b632df47edaf3699cae58123b98261.
-
01:11 PM
Bootstrap
Bug #5187 (Feedback): can't restore configuration
- Added multipart encoding to form
-
- Try to restore a config on diag_backup.php and you end up with:...
-
- needs patch is a closed status. I'll put this to assigned if Luiz wants to take a look, otherwise we could file a Fre...
-
- Luiz said he may give this a look since he has worked on bsnmpd in the past.
-
- This is a bug in the mibII module of bsnmpd on FreeBSD 10.x and is not specific to pfSense.
It happens even on a v... -
03:50 PM
Bootstrap
Bug #5189: vpn_openvpn_server dynamic input fields incorrect
- Applied in changeset pfsense:commit:27fc3a13e445f89003c23d43779a605f0172d030.
-
03:36 PM
Bootstrap
Bug #5189 (Feedback): vpn_openvpn_server dynamic input fields incorrect
- Actions modified to correspond with the list above
-
03:07 PM
Bootstrap
Bug #5189 (Resolved): vpn_openvpn_server dynamic input fields incorrect
- Fields are still not right...
"Enable authentication of TLS packets." = tlsauth_enable
"Automatically generate a... -
03:09 PM
Bootstrap
Bug #5138 (Closed): TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Most recent comments pertain to vpn_openvpn_server.php so have been moved to a new ticket: #5189
-
- Very nice!
-
03:00 PM
Bootstrap
Todo #5165: interfaces.php - Group 802.1x/RADIUS options into their own section
- Applied in changeset pfsense:commit:d65e45d3337915f27a1e8b744d949bce4fa7a8dd.
-
02:47 PM
Bootstrap
Todo #5165 (Feedback): interfaces.php - Group 802.1x/RADIUS options into their own section
- How's that?
-
-
- MFC'd to stable/10 and updated FreeBSD-src/devel, it should be OK on 2.3 too
-
01:59 AM Feature #4863: Add support for Sierra MC7355
- Confirmed working on pfSense 2.2.5 snapshots.
Thanks So Much -
- It never was a functional feature. We'll look at fixing it at some point, just not for 2.3.
-
09:21 AM Feature #3933: Limiter burst doesn't have any effect
- Does this mean that this is not going to be a feature anymore?
-
07:57 AM Bug #4985: Improper handling of "too short" voucher codes (1-2 chars)
- Two subsequent commits were done to ensure that we ignore vouchers shorter than 5 characters (too short to be a valid...
-
- This was fixed on 2.3 last week by my commit:dda80e7602bd190667aa23ce371eb8c3925f6459
Safe to close this one. -
- On Diagnostics > Test Port, source address selection does not work when an IP Alias VIP is selected.
A fix has bee... -
- https://forum.pfsense.org/index.php?topic=73017.0
https://forum.pfsense.org/index.php?topic=73152.0
-
- Me & my collegues thought it would be useful to know how many leases are in use (without having to copy it to an exce...
-
- Pull requests have been merged. Thank you Phil!
-
-
- Thanks for testing and reporting back.
-
02:01 AM pfSense Packages Bug #4452: squid3 XMLRPC Sync
- Works again, Thanks
-
- I don't think any of these are actual problem with Squid. When you install it, the way the package is written and how...
-
- Klaus Steinberger wrote:
>
> We do run a DNS Server with IPV6 and DNSSEC. to complete the the tests on dnsviz.net... -
01:49 AM Bug #2762: PF drops IPv6 packets with fragment header followed by a last fragment only
- Chris Buechler wrote:
> the real world systems I'm aware of that exhibited this behavior no longer do, due to infras... -
- the real world systems I'm aware of that exhibited this behavior no longer do, due to infrastructure changes on their...
-
- fixed
-
- marking this resolved on target 2.2.5, started #5185 to cover 2.3/bootstrap.
-
- fixed
-
- Thanks Phil. This is good for 2.2.5.
For 2.3, since we're using pkg, that changes (as Renato mentioned on pull 19... -
- The underlying RADIUS pieces still don't support IPv6.
I believe this is the root cause of this issue.
https://... -
- Could you define "Some stuff need to be done to implement correctly and to handle it trough the UI" - what stuff?
-
- I removed the NTP bits from rc.newwanip(v6) as they should be unnecessary and appear to be the source of the issues h...
-
12:38 AM Bug #4378: editing one of multiple pppoe connections with dial on demand enabled changes port assignment
- ok thanks, ill test it out when 2.3 snaps start coming out
-
- Thanks Bipin, forgot you'd sent that already. I was able to replicate using that config.
Subject and original des... -
- works, thanks!
09/21/2015
-
- this is correct now.
-
- The fix above noted in "do control plane MTU tracking" is in 2.3/10-STABLE and works, which fixes this.
-
- Added input validation to work around this (and related issues Paul noted) since that's not a valid config anyway.
... -
- these are user-configurable as advanced options.
-
-
- fixed
-
- fixed
-
- I also show/hide fields based on Authentication selection.
-
06:20 PM
Bootstrap
Bug #5108 (Feedback): services_captiveportal.php "Authentication method" needs clean up
- Applied in changeset pfsense:commit:bc27554143e73d0eaab5efb0d24de352d9085da6.
-
- New pull request for RELENG_2_2 that should be bug free :) https://github.com/pfsense/pfsense/pull/1928
The master... -
- The Interface list on services_ntpd.php only lists virtual IPs, it's missing the usual assigned interfaces (WAN, LAN,...
-
- The time servers fields don't have a delete option, can only add more rows via "Add Server" button. It didn't have on...
-
- vpn_ipsec_phase1.php and vpn_ipsec_phase2.php have extra dividing lines at the bottom of the page. Screenshots attach...
-
- Reordering P2s on vpn_ipsec.php doesn't work right.
For instance, clicking the button to move to the bottom of th... -
- the images are fine here now, will open a new ticket for the reordering issues we just discussed
-
-
06:50 PM
Bootstrap
Bug #5155 (Feedback): broken images on vpn_ipsec.php
- Applied in changeset pfsense:commit:d62df86b7c65ca8de0c67053bf030954fdbc27af.
-
- still missing in most recent OpenVPN currently available, 2.3.8.
-
- fixed by upgrade to strongswan 5.3.3
-
- fixed
-
05:00 PM
Bootstrap
Bug #4978 (Feedback): service restart and stop icon images broken
- Applied in changeset pfsense:commit:eafd375aec8fb54dbb65dd145a4bcba91f2175f0.
-
05:36 PM Bug #5180: DDNS sometimes not updating after primary WAN failure
- Seeing what I think is a related (though different) issue in 2.2.4
DDNS set to monitor gateway group {WAN1_WAN2_FA... -
03:47 PM Bug #5180 (Resolved): DDNS sometimes not updating after primary WAN failure
- Since update 2.2.2, DDNS (noip) is not updating the secondary WAN address after the primary WAN fails.
WAN1 and WAN2... -
- fixed
-
- Looks much better!
-
02:40 PM
Bootstrap
Bug #5179 (Feedback): Confusing grouping of items on vpn_openvpn_server.php and client after CSS changes
- Applied in changeset pfsense:commit:fbd9fabb0a86d8ed40047c52c8ad7719e7e9097d.
-
- After the CSS changes in #5170, the alternating background is splitting up some config fields that shouldn't be split...
-
- fixed
-
02:30 PM
Bootstrap
Bug #5021: can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Applied in changeset pfsense:commit:23eeaadf37e3894a692c4c40a399b2b95e37c690.
-
02:23 PM
Bootstrap
Bug #5021 (Feedback): can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Thanks for all the testing help.
Selector values were rived and queues now save correctly. -
- no change.
Access issue because of DNS rebinding not being excluded for domain on Steve's end, discussed elsewher... -
10:13 AM
Bootstrap
Bug #5021 (Feedback): can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- This control is unusual in that it saves two double-quotes to indicate the default value, rather than an empty string...
-
- fixed
-
- conversion looks good. Stats seem fine, needs a more thorough test case than what we have there which I'll setup and ...
-
02:39 PM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- status_queues now correctly displays the queue status (duh!) Test instance https://bootstrap-test1.pfmechanics.com/s...
-
10:58 AM
Bootstrap
Bug #5033 (Assigned): status_queues.php Not yet converted
-
10:58 AM
Bootstrap
Bug #5033: status_queues.php Not yet converted
- The converted file is in the repo, but I just looked it over and there is no way it is going to work, so hold off ple...
-
- fixed
-
02:31 PM
Bootstrap
Bug #5171 (Feedback): vpn_openvpn_server.php hide/display of "Local networks" fields backwards
- Redirect Gateway checkbox now hides/shows only the local settings. Remote settings remain in place per the server mod...
-
- That part works now, but now it also hides the "Remote network(s)" fields which is wrong. That checkbox should only h...
-
08:20 AM
Bootstrap
Bug #5171 (Feedback): vpn_openvpn_server.php hide/display of "Local networks" fields backwards
- Javascript logic corrected
-
- fixed
-
- This looks to have been resolved.
-
- Pull request has been merged
-
- Pull request has been merged. Thanks!
-
-
- Improvement made in changeset pfsense:commit:24e2d045499245571686ddf2d0e6d6bc27ab1eae
-
- Improvement made in changeset pfsense:commit:24e2d045499245571686ddf2d0e6d6bc27ab1eae
Fix applied in changeset pfsen... -
- the CSS change made improves things significantly. This page seems fine now.
The alternating background colors ha... -
- Fields are still not right...
Peer to Peer (SSL/TLS) Shows:
* "Enable authentication of TLS packets." (OK)
* "Au... -
- Looks like Steve Beaver fixed the action issues and I fixed the background color issue. Should just need to be reviewed.
-
- Fix for the background color issue is applied in changeset pfsense:commit:fbd9fabb0a86d8ed40047c52c8ad7719e7e9097d.
-
02:24 PM
Bootstrap
Bug #5138: TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Checkbox action resolved (per CMB) so passing hte display issue over to you.
-
- Closer, but there still appears to be a couple issues.
1) When set for an SSL/TLS type both "TLS authentication" a... -
08:00 AM
Bootstrap
Bug #5138: TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Applied in changeset pfsense:commit:ba9951c12caa153eda06b9e7783e2ec8e7b39b07.
-
07:47 AM
Bootstrap
Bug #5138 (Feedback): TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Javascript was simplified, fixed and commented so that I can understand it. Appears to be in agreement with 2.2 now.
-
- Pull request has been merged and cherry-picked to RELENG_2_2
-
- They all show now, thanks!
-
02:37 PM
Bootstrap
Bug #5178 (Feedback): status_interfaces.php - Only one interface is displayed
- Removed errant "break"
-
- On status_interfaces.php it should show output for every configured interface. Currently it only displays a single in...
-
- fixed
-
08:21 AM
Bootstrap
Bug #5172 (Feedback): vpn_openvpn_server.php shared key box shows when changing mode where it shouldn't
- Corrected as part of #5138
-
- fixed
-
11:00 AM
Bootstrap
Bug #5013: port forwards not adding linked rules
- Applied in changeset pfsense:commit:19fe55b3bff7d001835cfa6e9cd788ec4c79afe7.
-
10:48 AM
Bootstrap
Bug #5013 (Feedback): port forwards not adding linked rules
- Programmer had used incorrect element name (associated-rule-id vs filter-rule-association)
-
- fixed. 2.2.5 prevents an invalid ruleset, 2.3 and newer input validation prevents omitting IP from 6rd interface conf...
-
- fixed
-
09:30 AM
Bootstrap
Bug #5176: interfaces.php - 6rd configuration not working
- Applied in changeset pfsense:commit:c0c25504349e6c188f353336dded86972856c5b4.
-
09:16 AM
Bootstrap
Bug #5176 (Feedback): interfaces.php - 6rd configuration not working
- Corrected class name for he 6rd section
-
08:59 AM
Bootstrap
Bug #5176 (Assigned): interfaces.php - 6rd configuration not working
-
- I also tried to install squid3 on pfsense 2.2.4, but get this in the logs:
Sep 21 18:06:43 php-fpm[61548]: /pkg_mg... -
- Pull request has been merged. Thanks!
-
- Pull requestes have been merged
-
- I synchronized my VM again and now it worked. Somehow it must not have picked up this change the first try.
-
- I don't have a system setup with 2.3 just yet. I looked at the processing and the new bootstrap code still seems to p...
-
- The problem is still present on master (2.3), but appears to be fixed on 2.2.x.
-
- Pull requests have been merged. Thanks!
-
- Pull request https://github.com/pfsense/pfsense/pull/1923 for RELENG_2_2
Pull request https://github.com/pfsense/pfs... -
- Gone now. Thanks!
-
12:30 PM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:725f987f52d6d770d4d4ee522fa71eeb5790b13c.
-
12:19 PM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Mia culpa
if(ANTENNAS) condition corrected -
- The Antenna selection options are still showing up here for me when synced to master.
-
08:10 AM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:6dee9957d799f5d1254f80d8aa7149ccae1dfa72.
-
08:01 AM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Fixed and removed.
-
- Looks good to me now
-
12:30 PM
Bootstrap
Bug #5166: Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- Applied in changeset pfsense:commit:398814928d98d8d2e7b5d6da31e1228a8cf27dd9.
-
12:18 PM
Bootstrap
Bug #5166 (Feedback): Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- IP v6 addresses now shown
-
- Much better! Only one problem now, it does not display IPv6 addresses for the interfaces.
-
10:10 AM
Bootstrap
Bug #5166: Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- Applied in changeset pfsense:commit:389519adffccecb5d385fb528245038e58cc252e.
-
10:03 AM
Bootstrap
Bug #5166 (Feedback): Interfaces widget on the dashboard does not list interface IPv4/IPv6 addresses
- Programmer had used a variable that was never set
Icons were also broken (and fixed) -
- Added on 2.2.x.
Committed on FreeBSD HEAD, waiting to MFC it and it's going to reach 2.3 -
- Vast majority of the PRs I mentioned above and wasted about two days of my time with picking up on GitHub, redoing an...
-
- https://github.com/pfsense/pfsense/pull/1926 - fix interface assignment menus running off VGA screen
-
- https://github.com/pfsense/pfsense/pull/1923 - Redmine #5162 do not allow alias rename to an existing name - RELENG_2_2
-
- Yeah that's the expected behavior in this case. Thanks for the follow up!
-
- You're trying to add a route on a tap OpenVPN instance in a way that's not valid. That didn't change after upgrading.
-
- Looks good now. It shows up when it should and retains its value properly on save.
-
09:00 AM
Bootstrap
Bug #5175: vpn_openvpn_server.php - Authentication backend choice missing for Remote access types with auth
- Applied in changeset pfsense:commit:705ba8d55f3679bc9fca03e8c623ea592fc0420e.
-
08:55 AM
Bootstrap
Bug #5175 (Feedback): vpn_openvpn_server.php - Authentication backend choice missing for Remote access types with auth
- Added controls missing in original conversion
Simplified and tested Javascript show/hide code -
- This looks good now
-
08:20 AM
Bootstrap
Bug #5161: vpn_openvpn_server.php - Protocol selection missing
- Applied in changeset pfsense:commit:b66e45df261cd83e8a9d4aa8c6b59f72f9617c41.
-
08:17 AM
Bootstrap
Bug #5161 (Feedback): vpn_openvpn_server.php - Protocol selection missing
- Programmer had used incorrect array type in selector on the server page and I copied the error to the client page. Bo...
-
- Seems like that comment was meant for a different ticket than this one. This one still appears to be unchanged.
-
08:15 AM
Bootstrap
Todo #5165 (Feedback): interfaces.php - Group 802.1x/RADIUS options into their own section
- Programmer had used incorrect array type in selector and I had carefully copied/pasted the error to this file :(
-
09:36 AM Bug #4704: IKEv2 to Cisco ASA won't bring up multiple P2 networks
- I have also recently run into the same (frustrating) issue, and can provide testing once patch or 2.3 release is avai...
-
- Renato: I guess you forgot to press the "merge" button :) Still sitting unmerged on GitHub. (Same goes for the other ...
-
- Pull request has been merged
-
08:09 AM
Bootstrap
Todo #5146 (Assigned): services_dhcp.php not yet converted
-
08:09 AM
Bootstrap
Todo #5146: services_dhcp.php not yet converted
- My mistake. I thought this file was one of the three recently converted by Hari Subramani but it was not. I'll get to...
-
07:04 AM Bug #5039: Multiple PPPoE WANs no longer connect simultaneously after upgrade to 2.2.4
- Any further update regarding this issue?
-
- Pull request has been merged
-
- Pull request has been merged
-
- Pull request has been merged
-
- Pull request has been merged
-
- Pull request has been merged. Thanks!
-
- For example, this pull request makes some package file download timeouts bigger and improves a bit of error handling....
09/20/2015
-
- https://github.com/pfsense/pfsense/pull/1781 - Preserve MLPPP settings when saving interface settings (Bug #4568)
-
- https://github.com/pfsense/pfsense/pull/1922 - Move "Enable MSS clamping on VPN traffic" to System - Advanced - Firew...
-
- https://github.com/pfsense/pfsense/pull/1921 - Show openvpn interfaces while reassigning the interfaces for a restore...
-
- https://github.com/pfsense/pfsense/pull/1918 - GratisDNS support for hosts without subdomains
-
- https://github.com/pfsense/pfsense/pull/1916 - Fix Cloudflare support for Dynamic DNS Updates (Todo #4737)
-
- https://github.com/pfsense/pfsense/pull/1839 - DynDNS should allow "@" at hostname (Bug #3900); make no-ip.com round ...
-
- https://github.com/pfsense/pfsense/pull/1836 - Ignore DHCP pools that are out of range (if the user changes the subne...
-
- https://github.com/pfsense/pfsense/pull/1913 - pkg-utils.inc typo fix, typo causing useless junk leftovers in syslog ...
-
- There are multiple trivial fixes available for blatant bugs, just rotting in GitHub and getting periodic conflicts fr...
-
10:49 AM Bug #3726: Firewall Rule with Diffserv Code Point not matching properly
- I did replicate this on 2.2.4, but having looked at this again I now know what the problem is, and it's not a bug in ...
-
- https://github.com/pfsense/pfsense/pull/1922
-
- As noted at https://github.com/pfsense/pfsense/pull/1776#issuecomment-141786006 - this ain't IPsec-specific setting a...
-
09:18 AM Bug #5132: OpenVPN error after upgrade to 2.2.4
- I don't know if it is the right behavior but if I use TUN mode then it works finally, but if I set TAP mode then not....
-
- The patches in comment #7 are the patches against mpd CVS HEAD. I suggest using the patches against mpd 5.7, as that ...
-
- https://github.com/pfsense/pfsense/pull/1839
+ updated variant that just stops wasting time with unwanted sorts of h... -
- https://github.com/pfsense/pfsense/pull/1915 - master
https://github.com/pfsense/pfsense/pull/1916 - RELENG_2_2 -
- Robert Qbik wrote:
> If you want to add wildcard, you must type *.yourdomain.com, it's not working in pfSense becaus... -
- Resubmitted as:
https://github.com/pfsense/pfsense/pull/1911 - RELENG_2_2
https://github.com/pfsense/pfsense/pull/1... -
- Resubmitted as:
https://github.com/pfsense/pfsense/pull/1908 (master)
https://github.com/pfsense/pfsense/pull/190...
09/19/2015
-
06:05 PM Feature #4542: Support for PPPoE with MTU/MRU > 1492 (i.e. 1500)
- Included are the three patches to mpd. These are authored by Dmitry and David Wood (see upstream ticket).
Residual... -
- Though it adds little to the patches and commentary I've posted in the Sourceforge bug at https://sourceforge.net/p/m...
-
- There has been some changes in the upstream issue [[http://sourceforge.net/p/mpd/bugs/54/]] (patches and some testing...
-
- Yeah, so... the dropdown lists everything that's in the script (see https://github.com/pfsense/pfsense-packages/blob/...
-
10:23 AM pfSense Packages Feature #5174: nrpe: check_sensors doesnt work, missing lmsensors
- There are dozens more available in the web interface via the "command" drop down, ostensibly everything thats in /usr...
-
- The only commands defined and used in the *pfSense package* are listed here: https://github.com/pfsense/pfsense-packa...
-
- 1/ The patch appears incomplete at least regarding #2 - consider https://github.com/pfsense/pfsense-packages/blob/mas...
-
- fixed
-
- looks good
-
- fixed
-
- fixed input validation in 2.3
09/18/2015
-
- Change IPv6 type to 6rd on interfaces.php, and none of the 6rd config fields appear.
-
- this doesn't appear to happen on stock FreeBSD 11 unless there's something more to it than a single pass rule with ke...
-
- When set to "Remote Access (SSL/TLS+User Auth)" or "Remote Access (User Auth)" it should display a list of authentica...
-
- Looks good now
-
04:40 PM
Bootstrap
Bug #5163: vpn_openvpn_client.php - "Server host or address" field validation issues
- Applied in changeset pfsense:commit:d98c0efacf57a3c4ae4ceeee0f67301804ff36fc.
-
04:26 PM
Bootstrap
Bug #5163 (Feedback): vpn_openvpn_client.php - "Server host or address" field validation issues
- Fixed typo in element name
-
- A valid IP address or hostname in an OpenVPN client "Server host or address" field is rejected. The input validation ...
-
- The value should be the same as the text, seems to be numeric now. Actually, now that I look it's like that on the cl...
-
04:30 PM
Bootstrap
Bug #5161: vpn_openvpn_server.php - Protocol selection missing
- Applied in changeset pfsense:commit:0598717ebc555b57e069e78222c10e4d3281ba76.
-
04:23 PM
Bootstrap
Bug #5161 (Feedback): vpn_openvpn_server.php - Protocol selection missing
- Added missing element
-
- On vpn_openvpn_server.php there should be a protocol choice for TCP or UDP when editing a server in any mode. It's pr...
-
- That's probably a good move, though if the framework has a general issue with the scenario it may still come back to ...
-
- Jim T. said the antenna selection is of no use anyway, so should just remove it, then this can be closed out.
-
- It defaults to "default" now, but when manually set to auto, it still marks default as selected. I know PHP is pretty...
-
04:30 PM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:87c59979a0624f3ea0ee1ae900b06bcd7e50c98e.
-
04:11 PM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Thanks for your help in finding this!
It was an obscure issue in the Select.class.php framework file wherein '' ==... -
- Before adding the interface it did not exist in config.xml at all and there was nothing in in the wireless tag.
As... -
03:01 PM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- If $pconfig['txantenna'] is not set, the selector value is null, and the null array element is 'Default'.
Would yo... -
- On a fully up-to-date system with a wireless card, it's still defaulting to Auto for me.
-
- [2.2.4-RELEASE][root@firewall]/usr/pbi/nrpe-amd64/libexec/nagios: ./check_sensors
SENSORS UNKNOWN - command not fou... -
- Looks OK now
-
04:30 PM
Bootstrap
Bug #5164: interfaces.php - "Minimum wireless standard" option mislabeled on a card with only 802.11g support
- Applied in changeset pfsense:commit:109ebe80eaa9258c5cabfea764a24c245013bf7b.
-
04:18 PM
Bootstrap
Bug #5164 (Feedback): interfaces.php - "Minimum wireless standard" option mislabeled on a card with only 802.11g support
- Removed as requested
-
- When a card only has 802.11g support, the "Minimum wireless standard" option switches to "802.11g Only" which is OK, ...
-
- another good example of a page with a ton of excess whitespace. Comparison attached.
-
- that works on Windows, Mac and Linux now, looks good.
-
- should be possible, and a good idea, to list VIPs in the binding list.
As a workaround, can just bind it to localh... -
- P.S. If you want your "HA"/"failover", then stick...
-
- Dude. The XMLRPC feature was NEVER intended to do any HA. It's (like in tons of other packages) used to sync configur...
-
02:56 PM pfSense Packages Bug #5168 (Resolved): squid doesn't function during/after HA failover
- Per #2591, there is no spported way for squid to listen to a CARP VIP interface.
This means that HA isn't really HA ... -
- fixed
-
- Go to vpn_openvpn_server.php, add new.
Change "Server mode" drop down to any other option. Upon clicking the "Ser... -
- fixed
-
- The fields "IPv4 Local networks" and "IPv6 local networks" should be shown when "Redirect Gateway" is un-checked, and...
-
- fixed
-
- fixed
-
- not sure where that is to test
-
- still not adding associated rules
-
- not completely broken which is what this was referring to, this fixed.
-
- none option exists now. But it doesn't save as such when you select that option, and it doesn't default to that for n...
-
- Attached screenshots some examples of excessive white space we discussed, these on firewall_rules_edit.php.
-
-
- Close this bug. The currently used squidguard-squid3-1.4_7-$arch.pbi packages on 2.2 are signed just fine. (And the s...
-
- @Steve? Eh???
-
- Adam Thompson wrote:
> I can't even find the file in the github repo; is this an upstream bug?
No, it's not. http... -
03:20 PM
pfSense Packages
Bug #5169 (Feedback): /etc/rc.haproxy_ocsp.sh emits an extra blank line, causing cron to email that output
- Applied in changeset pfsense:commit:f92c948e12637b6f83da00b8581bcfc5a1032bde.
-
- In haproxy-devel v0.30, /etc/rc.haproxy_ocsp.sh contains an extra blank line, causing php to emit it, which causes cr...
-
- Looks good now, thanks!
-
03:11 PM
Bootstrap
Bug #5160 (Feedback): Packages menu entries ignored
- Corrected as noted. Thanks!
-
- Seems to be using the name of the package for the menu entry and not the name tag inside the menu tag.
For example... -
03:00 PM
Bootstrap
Bug #5160: Packages menu entries ignored
- Applied in changeset pfsense:commit:da4a4b9f556c3b374c361513684ad4ca4c44ffcc.
-
02:44 PM
Bootstrap
Bug #5160 (Feedback): Packages menu entries ignored
- head.inc now extracts the package config file name from config.xml and parses that file to obtain the menu informatio...
-
- After install 'System Patches' I noted the menu item "System -> Patches" were missing. The <menu> entry is present in...
-
- Closing this out for now.
There doesn't seem to be a reliable cross-platform way to stop browsers from filling in ... -
- The XMLRPC sync is there to synchronize configuration. You will NOT get any failover with Squid, as already explained...
-
- That's nice, but nothing in that thread addresses the problem; JimP completely missed the point. And I believe you'r...
-
-
- Please, read this post (and the entire thread there): https://forum.pfsense.org/index.php?topic=46067.msg256634#msg25...
-
- https://forum.pfsense.org/ -> there. (And certainly absolutely NOONE wants a collection of screenshots in huge PDF.)
-
- I can confirm that only some of the packages got reinstalled, despite the lack of any error message.
-
- Probably not worth diagnosing at this point (and certainly not in a discussion here on redmine) -- the package system...
-
- Adam Thompson wrote:
> Whoops, let's try that PDF again...
Can't upload it anyway, max file size is 5MB and there... -
- Kill Bill wrote:
> Diagnostics - Backup/Restore - Clear Package Lock button.
>
> (Certainly not going to download... -
- Whoops, let's try that PDF again...
-
- Diagnostics - Backup/Restore - Clear Package Lock button.
(Certainly not going to download "screenshots" in PDF.) -
- That just means one of the package reinstallation routines stopped. Info should be in logs. Post on the forum for mor...
-
- After upgrading 32-bit 2.2.2 to 2.2.4, I get the "packages are currently being reinstalled in the background" warning...
-
- Care to tell us what's exactly wrong with the value being set to off when required by user configuration?
https:/... -
-
- Forgot the code reference: https://github.com/pfsense/pfsense-packages/blob/master/config/squid3/34/squid.inc#L2228 a...
-
- This is not a problem, this is by design. NAT is used to redirect the traffic to localhost. Suggested change is just ...
-
- subject isn't desirable. #4989 covers what will properly accommodate that circumstance.
-
02:21 AM Todo #5158: Mobile IPSec Phase 2 tunnel configuration option needed
- Either one or both approaches should be enabled as currently setting remote peer address to "%any" isn't supported fr...
-
- The interfaces widget on the dashboard should display the configured or obtained IPv4 address and IPv6 address for ea...
-
-
- Eh, kindly close this. The bug referenced above regarding service start has been fixed and this one is just utterly u...
-
- https://github.com/pfsense/pfsense-packages/pull/1073
Fixed by removing the broken option which doesn't work anywa... -
- This appears to be working properly now
-
- It would be nice to have the 802.1x RADIUS options (IEEE802.1X, Primary 802.1X server, Secondary 802.1X server, Authe...
-
- Seems to start/stop OK now, though I had to manually edit the backend config due to #5161 and #5163
-
-
- If you create two aliases and rename the second one to the same name as the first, it is allowed by the GUI but obvio...
-
- Still a couple problems here:
1) "Peer Certificate Authority" and "Peer Certificate Revocation list" should be hid... -
- Better late than never. https://github.com/pfsense/pfsense-packages/pull/1075
-
- Looks good now, thanks!
-
- Applied in changeset commit:28909627356ebbd5930939f08450b8315313885f.
-
- Fixed in System Patches 1.0.6
commit:28909627356ebbd5930939f08450b8315313885f -
- https://github.com/pfsense/pfsense-packages/pull/1073
Stupid typo. -
- Perhaps, upstream boys could just fix the config file parsing idiocy instead of "documenting" on on mailing lists? If...
-
- I already told you to use Squid3 + C-ICAP to replace HAVP on another bug your filed.
-
05:52 AM pfSense Packages Bug #5157: HAVP 1.09 - Log tabs give 404, daemon mode doesn't work
- I am not using the daemon mode and I don't need it either. The amount of times this needs to be said is ZERO and for ...
-
- Pull request for master:
https://github.com/pfsense/pfsense/pull/1904
09/17/2015
-
04:10 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Applied in changeset pfsense:commit:d0613e4fb399a61355761bb07efa3a8a229eb707.
-
03:53 PM
Bootstrap
Bug #5099 (Feedback): firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Destination ports now behave as required.
If Source ports already contain a value, they should be shown without ha... -
03:39 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- First item is covered in bug #5045 so I'd like to continue to keep it separate and not just for this page.
Glad th... -
- The source port behavior is better, but the destination ports have gone missing.
So two problems now:
* If Source... -
01:30 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Applied in changeset pfsense:commit:b22368535d6c9781b30b33a23b4d1c4b4d4c9360.
-
01:24 PM
Bootstrap
Bug #5099 (Feedback): firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Javascript logic changged for source port display "Advanced" button now has toggle acton and its state survives a pro...
-
-
- So don't use the daemon mode. Dunno how many times this needs to be said - HAVP is completely abandoned upstream, noo...
-
- Log tabs in HAVP give 404.
In Daemon mode, AV starts but av proxy hangs (waiting for ClamD) then stops.
-
- There was a bug while restoring vouchers with incorrect data or without any data at all. The bug has been fixed.
-
09:07 AM
Bootstrap
Bug #5159 (Closed): Javascript refactoring
- The Javascript functions hideInput, disableInput, hideClass, addRow, delRow et al have been replicated across dozens ...
-
- Using "mobile" for site-to-site is probably the wrong way to accomplish this. More likely you want the ability to set...
-
- Pfsense UI doesn't allow in configuration to define the Remote Network (rightsubnet) when having mobile support enabl...
-
08:50 AM
Bootstrap
Bug #5153: firewall_rules_edit.php
- Applied in changeset pfsense:commit:860caa2fe545036685c1225be82d538fb40b1341.
-
08:44 AM
Bootstrap
Bug #5153 (Feedback): firewall_rules_edit.php
- Notes:
* The addGlobal() method is applicable to a form, not a section
* 'hidden' elements should not specify a lab... -
- Pull requests have been merged. Thanks!
-
08:10 AM
Bootstrap
Bug #5147: interfaces.php DHCP presets not working
- Applied in changeset pfsense:commit:34ab580d87d145b95035cdd607d28dc25dea2e20.
-
- Pull request has been merged on master and RELENG_2_2. Thanks!
-
03:29 AM Bug #4210: Bring back a FTP proxy
- You're talking about the "FTP Client Proxy" package in the related section of the latest version of PFSense, right ?
... -
03:22 AM Bug #3733: Certificate manager doesn't allow wildcards in Subject Alternative Names
- I've now registered for the ICLA (Username: dachande) and just created a new pull request @ https://github.com/pfsens...
-
- works
-
-
- fixed
-
- Similar issue to #4300 but for natport field.
-
- fixed
-
- fixed
-
- i already did the last time
-
- where's that converted file to test?
-
- This is probably caused by having some other service configured on port 10000. If not, it's #4642
-
- The images on vpn_ipsec.php for "move selected phase2 entries to end", "add phase2 entry" and "delete selected phase2...
-
- fixed
09/16/2015
-
- Yeah it was easier to fix the way I did it. I know we've had some back-and-forth with how to order those operations i...
-
- Commit for RELENG_2_2 is https://github.com/pfsense/pfsense/commit/2c42910ad782aeea24991e697716398c498794cf
-
- Oh - I see you did the other way around - call local_user_set_groups() twice. That should work also.
Note that is c... -
- I guess that after local_user_set_groups() it should then do something from local_user_set() again to make whatever i...
-
- Seems to be caused by commit:5372d26d9d25d751d16865ed9d46869d3b0ec5e1 -- chicken-and-egg problem with users and groups.
-
- Tested on 2.2.4 and 2.3, problem exists on both.
-
- Assigning a group with SSH privileges to a user does not properly enable SSH when the account is created.
When add... -
-
- Yes, that was RELENG_2_2 only. At the time the package system code was actively being worked on by Renato in master, ...
-
- though that was on RELENG_2_2 only, was that fixed separately in master, or am I missing another pull request?
-
- Pull request merged, thanks!
-
- works
-
08:10 AM
Bootstrap
Bug #5151: mask not configurable for CARP and IP alias VIPs
- Applied in changeset pfsense:commit:66513c5a40dab03961ce16d0ec065e3db08e4cf3.
-
07:56 AM
Bootstrap
Bug #5151 (Feedback): mask not configurable for CARP and IP alias VIPs
- JS revised to allow subnet bits on CARP and IP Alias
-
- You can already 'pkg install vpnc' on 2.2.x. It just uses a tun interface, which should then be assignable. vpnc isn'...
-
- the functionality in question doesn't work at all in 2.2.x. Closing this in favor of #4276
-
- Thanks Phil.
-
- The PR for master that was merged: https://github.com/pfsense/pfsense/pull/1826
and for RELENG_2_2: https://github.c... -
-
-
- Thanks Daniel. Merge request won't cleanly merge anymore, added a note there. If you can get an ICLA on file and subm...
-
- root cause of original issue is #4653, since fixed
-
-
- Gerald: could you provide your pre-upgrade config, or some further details, like what interfaces are you referring to...
-
-
- thanks, thought it sounded familiar
-
- Duplicate of https://redmine.pfsense.org/issues/4508
-
- any guidance please?
-
- think this may be related to some edge case where dhcpleases runs multiple times, though I'm not seeing how that coul...
-
07:09 PM pfSense Packages Bug #5154 (Resolved): squid3 - min/max_object_size directives out of order in config and not applied to cache_dir
- The minimum_object_size and maximum_object_size directives apply to any following cache_dir directives in the squid.c...
-
- duplicate of #4479
-
- root cause in #4931
-
- can't replicate any issues here. Change the LAN IP and DHCP scope at the console, and it immediately hands out IPs fr...
-
- looks like PCI bus issue in FreeBSD PR 196501
-
- issue is in Android/racoon
-
- root problem is #4931
-
-
- this is fixed in 2.3 since the upgrade system's been replaced
-
- seems specific to certain combinations of hardware, and doesn't appear to be in anything we're doing.
-
- I briefly removed this ~3 months ago, and reverted it after realizing that's not correct. It is possible to configure...
-
- please send to cmb at pfsense dot org.
-
- this was fixed
-
- was fixed in 2.2.4
-
- that change will make strongswan 5.3.3 which should be coming soonish. Should be fine to wait until its release.
-
-
- The FTP proxy package should suffice for those who need a FTP proxy.
-
- should be fixed in 2.3 as part of this.
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=164475 -
- sbeaver added that in Bootstrap
-
03:14 PM
Bootstrap
Bug #5153 (Resolved): firewall_rules_edit.php
- Page is broken and produces PHP error
-
03:10 PM
Bootstrap
Bug #5013: port forwards not adding linked rules
- Applied in changeset pfsense:commit:798b88f06b7816c7e5277bd75b6845ff95e47a1e.
-
03:05 PM
Bootstrap
Bug #5013 (Feedback): port forwards not adding linked rules
- Fixed selector value to save associated rule
-
02:30 PM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- File was converted by Hari Harasubramani and is ready to test. I have not tested it yet.
-
01:47 PM
Bootstrap
Bug #5033 (Assigned): status_queues.php Not yet converted
-
02:30 PM
Bootstrap
Todo #5146 (Feedback): services_dhcp.php not yet converted
- File was converted by Hari Harasubramani and is ready to test. I have not tested it yet.
-
08:28 AM
Bootstrap
Todo #5146: services_dhcp.php not yet converted
- This page has not yet been converted.
-
01:50 PM
Bootstrap
Bug #5148: interfaces.php DHCP field display issues
- Applied in changeset pfsense:commit:910b77ad1682740e481df29fc2d9c528a13c2da4.
-
01:42 PM
Bootstrap
Bug #5148 (Feedback): interfaces.php DHCP field display issues
- Javascript updated to provide required functionality
-
12:40 PM
Bootstrap
Bug #5138: TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Applied in changeset pfsense:commit:d5ad40881c0964108a4a70a9864dc2be86058234.
-
12:30 PM
Bootstrap
Bug #5138 (Feedback): TLS Authentication and Peer CRL field issues on vpn_openvpn_client.php
- Fixed javascript
Added missing client cert control -
- Ok thanks. If you come up with a means of replicating, please report back.
-
08:34 AM Bug #4933: Vlan interfaces created in web ui show up in ifconfig but don't show up in the UI.
- Well, I went to try to reproduce the problem again and now the vlan is showing up. Weird. Well, this can be closed ...
-
11:30 AM
Bootstrap
Bug #5142: Certificate, TLS, shared key, redirect gateway field issues on vpn_openvpn_server.php
- Applied in changeset pfsense:commit:bca536077c5efc91075e7da0da17eed741cf1940.
-
11:18 AM
Bootstrap
Bug #5142 (Feedback): Certificate, TLS, shared key, redirect gateway field issues on vpn_openvpn_server.php
- All issues corrected
-
- Works now, thanks!
-
07:44 AM
Bootstrap
Bug #5139 (Feedback): system_usermanager.php - Deleting a user has no effect
- Corrected GET/POST error
-
09:50 AM
Bootstrap
Bug #5141: vpn_openvpn_server.php tap options missing
- Applied in changeset pfsense:commit:b085759d162462466a4b555ec4892636b0231605.
-
09:36 AM
Bootstrap
Bug #5141 (Feedback): vpn_openvpn_server.php tap options missing
- From the page logic it looks like those input are shown:
if tunneltype == TAP AND if servermode != peer-to-peer
... -
09:20 AM
Bootstrap
Bug #5145: services_captiveportal_ip.php missing directional indicator
- Applied in changeset pfsense:commit:881c7fe70cb8a66ec1255aca55df807d84c8892c.
-
09:07 AM
Bootstrap
Bug #5145 (Feedback): services_captiveportal_ip.php missing directional indicator
- Direction value was not being saved in config
-
09:00 AM
Bootstrap
Bug #5143: vpn_openvpn_server.php "Inter-client communication" missing checkbox
- Applied in changeset pfsense:commit:54885c789240f4bf4a20d6a0d11dd199cd7361e5.
-
08:46 AM
Bootstrap
Bug #5143 (Feedback): vpn_openvpn_server.php "Inter-client communication" missing checkbox
- hideInput -> hideCheckbox
Checkboxes require special handling to show/hide -
08:33 AM
Bug #4642: OpenVPN process status stopped... but its running
- I have a similar, if not the same, problem running a 2.2.4 cluster in Carp Mode w/ Gateway Group. My OpenVPN instance...
-
08:22 AM
Bootstrap
Bug #5150 (Feedback): Duplicating load balancer pool creates empty disabled member
- serversdisabled list filtered to remove blank entry
-
- Lest anyone think that this problem is unique to my one machine...
Since submitting this bug report, four more peo... -
- Working on that one
-
-
07:40 AM
Bootstrap
Bug #5147: interfaces.php DHCP presets not working
- Applied in changeset pfsense:commit:f438135364e7e4d5713c0a44399b1cb166255f25.
-
07:24 AM
Bootstrap
Bug #5147 (Feedback): interfaces.php DHCP presets not working
- Added Javascript to provided that functionality
-
- OK, merged. Did uninstall, followed by a couple of reinstalls, the reinstalls work fine, all settings preserved, pass...
-
06:45 AM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- Alberto Iglesias wrote:
> In this last case are cable connections (30M/6M). Routers with NAT and DMZ configured poin... -
06:41 AM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- In this last case are cable connections (30M/6M). Routers with NAT and DMZ configured pointing to the pfsense interfa...
-
- Alberto Iglesias wrote:
> New installation with 2.2.4 and two wan connections, and same problem. In this case also w... -
- New installation with 2.2.4 and two wan connections, and same problem. In this case also with two LANs, each one with...
-
-
- this is probably something that's been fixed in a newer base OS version in the mean time.
Oliver, this still some... -
- this was fixed long ago
-
- Bill: if you could update for bootstrap (current master) and put in a pull request, we can review there and get it me...
-
- can you still replicate in 2.2.4?
-
- this still happen on 2.2.4?
-
- this is fixed in 2.2.x versions.
-
- duplicate of #1819
-
-
- merged, thanks! Leaving for feedback
-
- wouldn't have to re-create everything in that circumstance, could just manually edit the config to change the order. ...
-
- this change looks fine but would like confirmation
-
- Not seeing how that could happen. Not replicable in a similar config. Maybe your VLANs are interconnected somehow so ...
-
- The route-to is for multi-WAN purposes. It sounds like it has some impact on things in this case. I'll see if I can r...
-
-
- Anything initiated from the firewall itself (squid, other possibilities) doesn't hit reflection. It's more complicate...
-
- this was fixed some time ago
-
- I don't think this is a bug, along the lines of what Michael mentioned in the last comment.
Alex: can you still r... -
- Agree, this is zero care factor and the method of rendering and CSS will all be different with the Bottstrap stuff.
-
- issue won't exist in the same way at least in Bootstrap version so won't fix this, if you notice an issue there let u...
-
- I recall an issue along these lines that was fixed in 2.2.x. This something you can replicate on 2.2.4?
-
- Note: The eventual pull request for master was https://github.com/pfsense/pfsense/pull/1824
That was merged to maste... -
-
- fixed, thanks
-
-
- closing this in favor of #4133
-
- we haven't changed anything. That circumstance, if you search on it, is common to scenarios where you blast Dyn with ...
-
12:58 AM Bug #4894: rc.dyndns.update is missing to update one or two entries from <dyndnses></dyndnses>
- The consequence by this statement would be a) that Dyn has changed their policy without a communication at all and b)...
-
-
- fixed, thanks for the report.
09/15/2015
-
- this is an issue, end up with state mismatches. Can work around with floating rules w/sloppy state and any TCP flags....
-
- pull request moved to: https://github.com/pfsense/pfsense/pull/1823
https://github.com/pfsense/pfsense/pull/1840
... -
- What it does there on the back end is stores the link local IPv6 IP of the interface, which does get synced, but does...
-
- On firewall_virtual_ip_edit.php, CARP and IP alias type VIPs must have the mask be configurable. That was disabled fo...
-
- The updated wireless and Atheros driver in 2.2.2 and newer addresses the crash here. The force_full_reset Zsolt noted...
-
- I believe we discussed this in a forum thread. It appears you're getting rate limited by Dyn because so many updates ...
-
- The calculations there seem fine, the counters it's pulling from are those that top uses and the math is correct. I d...
-
- this was all fixed some time ago.
-
- PPTP has been removed in 2.3, won't fix.
-
- When duplicating a pool on load_balancer_pool_edit.php, a blank member is added to the disabled box under "Current po...
-
- There is a memory leak of some sort in strongswan with FreeBSD. Ticket opened by one of our users in their bug tracke...
-
- Applied in changeset commit:2975a60832296bf824cb737010ddfb11ee316bc6.
-
- Applied in changeset commit:c9d46a8e801650dccea466f86c81df3fa626713c.
-
- The DHCPv4 fields on interfaces.php should behave more like 2.2.4. Lot of noise there that was hidden previously. Lik...
-
- Selecting the presets should fill in the appropriate values in "Protocol Timing" fields as before.
-
03:20 PM
Bootstrap
Bug #5021: can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Applied in changeset pfsense:commit:886b12b6f57932f7c1f9339901cbb01b6f548a7a.
-
03:15 PM
Bootstrap
Bug #5021 (Feedback): can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Added 'None' option and changed initial value to accommodate new rule
-
- that system's stable again and still has an example case.
-
- fixed
-
07:50 AM
Bootstrap
Bug #5014: no multi-delete on firewall_nat_out.php, firewall_rules.php, firewall_nat.php
- Applied in changeset pfsense:commit:f185aaacee31428358349d6e68f1321ab1983df1.
-
07:50 AM
Bootstrap
Bug #5014: no multi-delete on firewall_nat_out.php, firewall_rules.php, firewall_nat.php
- Applied in changeset pfsense:commit:7c540a5ccc8d11a6317f2e10e65c2808937c19f2.
-
07:47 AM
Bootstrap
Bug #5014 (Feedback): no multi-delete on firewall_nat_out.php, firewall_rules.php, firewall_nat.php
Double-click to edit, click to select, multi-delete and drag to re-order now supported on:
* firewall-nat.php
*...-
- services_dhcp.php seems to not have been finished, missing formatting, images are broken.
-
- services_captiveportal_ip.php has the directional indicators shown at the bottom, but they're never displayed by the ...
-
- Looks good now, thanks!
-
02:10 PM
Bootstrap
Bug #5140: system.php - Only one entry for DNS Servers
- Applied in changeset pfsense:commit:54c605d497f4d8fa36074118c67b7926253d75e4.
-
01:59 PM
Bootstrap
Bug #5140 (Feedback): system.php - Only one entry for DNS Servers
- Removed conditional that was causing only configured servers to be displayed.
Fixed help/formatting/layout. -
- Note that it should be four separate DNS servers each with an associated gateway choice.
-
- There is only one entry box for DNS servers on system.php and there should be four.
-
- that's back, still has test case in place.
-
- fixed
-
- I have a B2B VPN scenario that requires me to use the the Cisco-compatible "vpnc" client (https://www.unix-ag.uni-kl....
-
- "Inter-client communication" on vpn_openvpn_server.php is missing its checkbox.
-
- Go to vpn_openvpn_server.php, add new. Switch server mode to shared key.
1) The "Automatically generate a shared ... -
- When switching from Device Mode tun to tap on vpn_openvpn_server.php, 4 new fields should show up. "Bridge DHCP", "Br...
-
- On system_usermanager.php if you click "Delete" for a user it has no effect. The user list loads again with the actio...
-
- part of this is fixed, the remainder that's outstanding I'll cover in new tickets.
-
- Browse to vpn_openvpn_client.php, hit "Add client".
1) when you uncheck "Automatically generate a shared TLS auth... -
- fixed
-
12:00 PM
Bootstrap
Bug #5116: vpn_pppoe_edit: Needs rework of add-row functionalitiy
- Applied in changeset pfsense:commit:ba74921247244ec295ba1b3b818e02c057df6a47.
-
11:56 AM
Bootstrap
Bug #5116 (Feedback): vpn_pppoe_edit: Needs rework of add-row functionalitiy
- I was not able to push this change until 13:00 EST today due to IPSec outage. Please retest.
-
- I may have been premature in removing your debug code there while I was fixing up some of the text on this page, sorr...
-
10:06 AM
Bootstrap
Bug #5116 (Feedback): vpn_pppoe_edit: Needs rework of add-row functionalitiy
- vpn_pppoe_edit now uses the php table library to add/delete/save rows
-
12:00 PM
Bootstrap
Bug #5036: missing easy rule and DNS icons on diag_logs_filter.php
- Applied in changeset pfsense:commit:89a19fa17f50530b7b5c267ed61cc6d3fcb85626.
-
09:15 AM
Bootstrap
Bug #5036 (Feedback): missing easy rule and DNS icons on diag_logs_filter.php
- Icons replaced with Bootstrap glyphicons and key added at bottom of page.
Fixed Javascript so "resolve" function wor... -
12:00 PM
Bootstrap
Bug #5027: system_gateways_edit.php needs Advanced clean up
- Applied in changeset pfsense:commit:d398152473bc7fece9d4b647c27d26c723f380c8.
-
08:24 AM
Bootstrap
Bug #5027 (Feedback): system_gateways_edit.php needs Advanced clean up
- Checkbox converted to button
-
11:10 AM Bug #3997: get_interface_ip() returns first IP on interface, not necessarily primary IP
- Same issue here, as stated in issue #5136.
Let me know if I can provide something useful. -
-
-
- this has always been an issue. root cause in #3997
-
- Using pfSense 2.2.4 on an APU board, I have a bridged LAN_WLAN interface on 192.168.1.1/24 with 2 IP Alias : 192.168....
-
09:13 AM pfSense Packages Bug #4508: Mailscanner does not work on pfSense 2.2.
- Soren Stoutner wrote:
> As documented in the forum, mailscanner does not work at all in pfSense 2.2.
>
> [[https:... -
08:10 AM
Bootstrap
Bug #5137: OpenVPN not starting via status_services.php
- Applied in changeset pfsense:commit:0b1c29653bbee8359e40cb68f2e615edab7dd2ba.
-
08:02 AM
Bootstrap
Bug #5137 (Feedback): OpenVPN not starting via status_services.php
- Programmer had converted {$var} format to . $var . format but added some extraneous dots.
-
07:55 AM
Bootstrap
Bug #5137 (Resolved): OpenVPN not starting via status_services.php
-
- If it suffices, please explain to me how I am supposed to setup pfsense / vsftpd so that :
- One FTP server is beh... -
03:12 AM Bug #4642: OpenVPN process status stopped... but its running
- Hi Chris... unfortunately I can't replicate, because I do not know how to trigger it... it simply occurs.
What I can... -
- Someone that can replicate this, could you provide OpenVPN logs from the time it lost track of the process? Also syst...
-
-
- the m0n0wall config conversion functionality is possibly much more broken than just this on current versions. I can't...
-
- if this is still an issue, it can be pursued with miniupnpd directly as that's where the issue resides. Not a big dea...
-
- was this ever fixed coz i dont see any commits that fixed this
-
-
-
-
- FTP proxy is gone so this is no longer an issue.
-
- I hit this issue with a customer last week. Worked fine after disabling scrub. I have pcaps from their traffic (UBZ-6...
-
-
- it'd be nice to silence this, it's really chatty on some systems, and pointless.
-
- this is probably something that's been fixed since then. If you're still having issues, please post to the forum and ...
-
- Thanks for sending your config. It isn't replicable restoring to a 64 bit VM. It's from an ALIX it appears though, ma...
-
-
- The problem described in subject is fixed. The root cause of what you're seeing there is #4642. You seem to have an e...
-
- fixed, thanks
-
- What happens here is OS X and iOS do a SOA lookup for .local, and if they get NXDOMAIN in reply, they strictly use mD...
-
- it doesn't show up for assignment because it doesn't show in the VLANs list there. no idea how that could happen, the...
-
- fixed
-
- fixed
09/14/2015
-
08:19 PM Bug #5131: Wrong radvd.conf generated
- Oh I must have been tired, the wrong entry is AdvAutonomous not AdvSendAdvert, sorry for the confusion.
-
- The line numbers you're referencing don't match any 2.2.x version. There also isn't anywhere where we set "AdvSendAdv...
-
- There is a legit issue there, but not with static IP WAN. That's what happens if you don't fill in a border relay IP,...
-
- moving out of bootstrap and to todo for handling the back end bits.
-
- Root problem is: ...
-
03:14 PM Bug #5135: DHCP interfaces are always treated as having a gateway, even if one is not assigned by the upstream DHCP server
- I'm afraid the world has changed! DHCP is prevalent on cloud implementations and is used to configure the guest acco...
-
- You're possibly the only person on earth for whom that isn't a safe assumption. Generally a bad idea to DHCP assign y...
-
- interface_has_gateway() returns true for DHCP interfaces, it does not consider whether DHCP hands out a gateway or no...
-
- Applied in changeset commit:149efbeac4e6eaa9d8062f26bbc172c86020e231.
-
- Applied in changeset commit:d6b4dfe36b2be8b71df733823bb7ffe552300676.
-
-
- The XML is gonna happily swallow the <encoding>base64</encoding> tag for pretty much any field type [1] (...
-
- We purposefully disable duplicate message compression in all cases explicitly by passing "-c -c" to syslogd. Someone ...
-
- Hmmm... Considering the VRT rules for 2.1.x Snort version are gone, I think this issue is not exactly urgent for you ...
-
06:09 AM Feature #5133: syslog repeated message suppression
- BTW: for anyone who reaches this issue because of the barnyard2 problem: pfsense had been configured with option "Ena...
-
- Could pfsense gain the ability to suppress/summarise repeated identical syslog messages?
The box shown here is 2.1... -
- apinger just doesnt work well, probably it can be replaced by something that monitors the actual ppp etc connection l...
09/13/2015
-
- After upgrading to pfSense 2.2.4, the OpenVPN service doesn't create the neccessary routes:
Sep 14 04:16:51 openvp... -
- https://github.com/pfsense/pfsense-packages/pull/1064
-
- Hi
I was playing around with IPv6 configuration for a bit and seem to have triggered an issue with the radvd confi...
09/12/2015
-
- Squid3+HAVP(library mode) are running properly. Just installed Mailscanner for email attachment antivirus but service...
-
- thanks!
-
- Eh...
1/ Just wait till it gets merged.
2/ Use Filer package or something similar to keep track of the files, oth... -
- Thanks to reading your commit, I changed the files in /usr/pbi/havp-i386/local/share/examples/havp/templates/en and a...
-
- The templates could have never worked, the paths are incorrect, no idea what the package was trying to do.
https:/... -
- Kill Bill wrote:
> Hmmm, this HAVP thing is seriously redundant with Squid3. On that note, for Squid3, you need this... -
- Just saw that you have commited 1.08.
I uninstalled and installed 1.08 and it looks good, service does not stop when... -
- @Catalin: Until the FUBAred apinger gets replaced with something working, I wouldn't expect any solution here.
-
- hi. Any news? can we submit any logs? how is this bug approached?
One more note: any system change - GW, routing, ... -
- Err... the link for master is https://github.com/pfsense/pfsense/pull/1895
-
- https://github.com/pfsense/pfsense/pull/1894 (RELENG_2_2)
https://github.com/pfsense/pfsense/pull/1894 (master)
-
- Reference: https://forum.pfsense.org/index.php?topic=99388.0...
-
- Thanks for testing. ;)
-
07:06 AM pfSense Packages Bug #5114: squid3 version 0.3.0 errors
- 0.3.2 work #1!
-
- Merged, please test 0.3.2 and report back. Regarding the pinger permissions, you MUST either uninstall Squid3 first a...
-
06:52 AM Bug #4746: captive portal allowed hostnames not loaded into table at boot time
- Is there a workaround for this bug in 2.2.2-2.2.4 ?
09/11/2015
-
03:02 PM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- Still cannot reach :(
-
01:48 PM
Bootstrap
Bug #4980 (Feedback): Issues editing OpenVPN server
- Corrected input element name
-
01:33 PM
Bootstrap
Bug #5021 (Feedback): can't not select queue/ackqueue on firewall_rules_edit.php where queues exist
- Would you mind setting this one up again please? This: https://bootstrap-test1.pfmechanics.com no longer reachable.
-
01:27 PM
Bootstrap
Bug #5118 (Feedback): can't edit admin user
- Input was set 'disabled' but should have bee 'readonly'
-
- Looks better now, thanks!
-
01:18 PM
Bootstrap
Bug #5126 (Feedback): load_balancer_virtual_server_edit.php - "Relay Protocol" has wrong description text
- Corrected.
I should really disable ^C/^V on my keyboard :) -
- When editing a virtual server, "Fall-back pool" is repeated. The second instance should be "Relay Protocol".
2.3:
... -
- Looks good now, thanks!
-
12:50 PM
Bootstrap
Bug #5127: load_balancer_virtual_server.php - Fall Back Pool text should be a link
- Applied in changeset pfsense:commit:737a2c930ecc08d86a25f7b095179a3af058f9d1.
-
- We do need to be careful of a potential XSS in the pool name but yeah, it should be HTML otherwise.
-
12:38 PM
Bootstrap
Bug #5127 (Feedback): load_balancer_virtual_server.php - Fall Back Pool text should be a link
- Sorry, didn't realize that was an HTML filed too :(
-
-
- The HTML is being printed instead of a link for the Fall-back pool on the load balancer list
!http://i.imgur.com/9... -
- Works now, thanks!
-
12:54 PM
Bootstrap
Bug #5128 (Feedback): load_balancer_virtual_server_edit.php - Delete action is not deleting
- Delete button now points to load_balancer_virtual_server.php, NOT load_balancer_virtual_server_edit.php
-
-
- When selecting "Delete" for a virtual server entry, it opens the entry for editing instead. the URL does show ?act=de...
-
- Looks good, thanks!
-
11:31 AM
Bootstrap
Bug #5125 (Feedback): interfaces.php - "WPA mode" option should default to WPA2
- Defaults changed as requested
-
- "WPA mode" should default to WPA2 as it did on 2.2.x
-
- Looks good, thanks!
-
11:30 AM
Bootstrap
Bug #5124 (Feedback): interfaces.php - "WPA Pairwise" option should default to AES
-
- On 2.2.x the default for "WPA Pairwise" was "AES (recommended)", on bootstrap it defaults to "Both" which isn't ideal.
-
12:15 PM
Bootstrap
Bug #4959 (Feedback): Alias autocomplete is gone
- Autocomplete has been fixed by hiding the helper text.
Failure to validate will be addressed in a new ticket. -
- OK, there is still the issue of the search results (debug code?) printing out. More apparent when editing an alias se...
-
11:47 AM
Bootstrap
Bug #4959: Alias autocomplete is gone
- The problem is not the autocomplete thing, but that the input field is set to "IpAddress" and so does not accept a ho...
-
- It's better but still not 100%.
On aliases and rules the search results (Or "No search results") are printed near ... -
09:20 AM
Bootstrap
Bug #4959 (Feedback): Alias autocomplete is gone
- It's back :)
-
-
12:10 PM
Todo #5123 (Feedback): Remove WEP
- Applied in changeset pfsense:commit:cf011cf210090458096230a9160b2d5675724669.
-
- OK, that may take care of the GUI (at least the options) but it also needs some backend adjustments to remove support...
-
12:04 PM
Todo #5123 (Feedback): Remove WEP
- WEP removed by the use of 'define("ALLOWWEP", false);' - Just in case
-
- After some internal discussion, it's time to remove WEP. Not only is it horribly insecure, it has been deprecated by ...
-
11:20 AM
Bootstrap
Bug #5121: interfaces.php - Wireless Antenna Selection should default to "Default"
- Applied in changeset pfsense:commit:c71c434b63dfa2bb628cb7dce769d361d385a9b6.
-
11:09 AM
Bootstrap
Bug #5121 (Feedback): interfaces.php - Wireless Antenna Selection should default to "Default"
- Antenna controls now default to "Default"
-
- The Transmit and Receive antenna options under "Antenna Settings" are defaulting to "Auto" on bootstrap rather than t...
-
- Upon further discussion, WEP is dead and should just be removed rather than repaired.
-
- On a wireless interface, the WEP settings have four keys and a radio selector after to pick the Tx key. The option al...
-
09:28 AM
Bootstrap
Bug #5120 (Feedback): interfaces.php - "Enable WPA" option for wireless does not save
- Corrected wpa_enable element name
-
- The "Enable WPA" checkbox for wireless interfaces does not save. Check the box, click save, when the page reloads it ...
-
- I think the poster's name lookup table is a bit out of sync here. I haven't posted on this yet. Maybe you mean:
Cliv... -
04:59 AM Bug #5062: is_subnet() is stilll useless for validation
- Clive /Phil - left to itself, how does pf (and other FreeBSD packages used in the router such as dhcpd, tcpdump, etc ...
-
- "... or just the second [decimal] and ignore the first [octal]..." (typo)
-
- Following another email and examples this is the issue:
The issue intended isn’t in pf, and the issue title needs ... -
- Another attempt to fix this properly: https://github.com/pfsense/pfsense-packages/pull/1058/ (needs Squid3 reinstall ...
09/10/2015
-
- Thanks, much appreciated!
-
- Hmmm, this HAVP thing is seriously redundant with Squid3. On that note, for Squid3, you need this ATM, otherwise any ...
-
- Reinstalled, followed your workaround with the following files
https://raw.githubusercontent.com/doktornotor/pfsense... -
- (BTW - the reinstall will undo both of the fixes above of course.)
-
- Yeah. Maybe. Or just use Squid3 + C-ICAP, it at least is not dead as a coffin nail upstream.
-
- Sep 11 04:16:40 迿^D[96977]: Running as user: havp, group: havp
Sep 11 04:16:40 !A)M-^D쿿^Q[96977]: --- Initializing ... -
- thanks, that brought the settings page.
However AV service is not starting now. Cant see any relevant logs in syslog... -
- NA NA wrote:
> However when I click settings in HAVP, I get the following
> Warning: Invalid argument supplied for ... -
- Ugh. Proper link: https://raw.githubusercontent.com/doktornotor/pfsense-packages/8cbe072937b145e384f6278e9856c5fc92ee...
-
- Afraid that message is just useless. Regarding the cron handling, it's still wrong in the link above due to strong ty...
-
- seems like the services are up now.
However when I click settings in HAVP, I get the following
Warning: Invalid a... -
- Much better. Please, test this:...
-
- NA NA wrote:
> Thanks, was stupid of me looking at the working thing
> Here is the portion from config.xml.bad
>
... -
- Thanks, was stupid of me looking at the working thing
Here is the portion from config.xml.bad
501 <cron>
502 <... -
- pf doesn't care whether or not the subnet has the correct network address, it'll figure it out. For instance with an ...
-
- Sorry - one thing Phil, could be important.
KB just sent me an email. As I understand it, he says that the issue ... -
- If it's done, then make it IPv4/v6 agnostic (will check using whichever family it verified against).
Probably shou... -
01:29 PM Feature #5119 (Resolved): Unbound allow configuration of forward-zone in UI
- Related to my post https://forum.pfsense.org/index.php?topic=99297.0
I found that using the resolver "domain overr... -
- Edit admin on system_usermanager.php, and hit Save, and you end up with: ...
-
07:13 AM pfSense Packages Bug #5114: squid3 version 0.3.0 errors
- Kill Bill wrote:
> Yeah, the wrong permissions have been there ever since. It's now fixed in the package. If somethi... -
02:16 AM Bug #4913: XMLRPC sync craches PHP-fpm
- Problem is what i think solved, The thing i found is that the gateway monitor by some reason says that the ISP gatewa...
09/09/2015
-
- NA NA wrote:
> Line 562 corresponds to
>
> <rrd>
> <enable/>
> </rrd>
Look at /cf/conf/config.xml.bad instead. -
- 2.2.4-RELEASE (i386) Fresh install in VM, no other packages
FreeBSD 10.1-RELEASE-p15
package havp-0.91_3-i386
... -
- Pi Ba wrote:
> As for the permission issue, ive send a new pull request for it.: https://github.com/pfsense/pfsense-... -
04:34 PM pfSense Packages Bug #5114: squid3 version 0.3.0 errors
- The only issue with pfSense package manager is that if you 'reinstall' it uses the same package.inc file during unins...
-
- Dave B wrote:
> could we relay this to the pfsense devs so they can fix it?
> I reinstalled the package at least 4 ... -
- could we relay this to the pfsense devs so they can fix it?
I reinstalled the package at least 4 times, the issue ... -
- (IOW, to add to the above - the apparent bug here with package reinstalls is that the inc file is cached and you need...
-
- I don't think I care any more. What could be done in the package is done. If reinstall/upgrade fails to apply permiss...
-
- ok got to chmod 4755 /usr/pbi/squid-amd64/local/libexec/squid/pinger
fixed
but the package update won't fix it by ... -
- even if i chmod 4755 /usr/pbi/bin/libexec/squid/pinger
2015/09/09 13:03:16| pinger: Initialising ICMP pinger ...
20... -
- same problem with 0.3.1
-
- Yeah, the wrong permissions have been there ever since. It's now fixed in the package. If something's changing your p...
-
- I did some further testing and manually changing the permissions then restarting the service seem to work. pinger sta...
-
- The issue with pinger is still there. I did an uninstall, reboot, install, reboot. I notice after the last reboot, th...
-
-
- Yeah, OK. This is not a place to seek support, kindly move this to https://forum.pfsense.org/index.php?board=60.0
... -
- even with ICMP disabled it still show those errors, the prior version wasn't doing this
and also wasnt doing this:... -
- This has nothing to do with new version. In Proxy - General Config, check "Disable ICMP"
-
- ==> /var/squid/logs/cache.log <==
2015/09/09 03:39:54 kid1| assertion failed: store_swapout.cc:307: "mem->swapout.si... -
03:29 PM
Bootstrap
Bug #5116 (Resolved): vpn_pppoe_edit: Needs rework of add-row functionalitiy
- Needs to use the "repeatable" library per firewall_aliases_edit.php
-
- Sounds good. I'll figure out something that doesn't change the existing behaviour unless strict validation is explici...
-
- That said, if someone wanted to add an optional parameter to force strict validation perhaps both needs could be fulf...
-
- There are comparatively few things that expect an exact network ID/CIDR compared to things that are more forgiving. I...
-
- Shrug. I assumed it's a generally usable function for input validation, e.g. in packages. Apparently, it isn't.
-
- Two other reasons why RFC-compliant but unhelpful cases shouldn't be blocked:
One scenario is when the router migh... -
- I agree it doesn't seem like a bug. Areas that are known to be sensitive to wanting an actual network address can run...
-
- Unless there's a good reason, I think - so they should.
It's not necessarily the router's job to make sure the su... -
01:40 PM
Bootstrap
Bug #5007: webUI broken when notice pending
- Applied in changeset pfsense:commit:d7218f770cd25418bfb09e42df71f47ae9b92849.
-
01:34 PM
Bootstrap
Bug #5007 (Feedback): webUI broken when notice pending
- Modal HTML fixed in head.inc
Modal moved outside of main display div to it doesn't kill the rest of the page/GUI
... -
01:00 PM
Bootstrap
Bug #5110: adding captive portal vouchers not working
- Applied in changeset pfsense:commit:85ee73a56b58cb79b02b6b4d7d643a2161e6249e.
-
12:47 PM
Bootstrap
Bug #5110 (Feedback): adding captive portal vouchers not working
- Corrected missing character in link
-
- thanks
-
- Merged => fixed.
-
- thanks
-
- As noted above, fixed with https://github.com/pfsense/pfsense-packages/pull/869 ; can be closed.
-
-
- Merged => fixed.
-
-
- Works for me with current package. Would be nice to get some feedback here from someone else...
-
- thanks
-
- Please, close.
-
11:36 AM
Bootstrap
Bug #5115 (Closed): firewall_aliases_edit: No hint on page load
- Hint system moved to function and called on page load.
-
11:35 AM
Bootstrap
Bug #5115 (Closed): firewall_aliases_edit: No hint on page load
- Hint is provided when changing hhe "type" selector, but not on initial page load
-
-
- Merged => fixed.
-
-
- Fixed.
-
- thanks
-
- This is not a bug, please close.
-
- Sorry for the delay - modem was borrowed from that line for a customer. Now have it back and...
Last 50 PPP log e...
09/08/2015
-
- yeah this is all good now, thanks!
-
09:20 AM
Bootstrap
Bug #5010 (Feedback): IPv4/IPv6 mask issues on firewall_aliases_edit.php
- I believe this was fixed by #5102
Please confirm. -
- fixed
-
08:40 AM
Bootstrap
Bug #5102: vpn_ipsec_phase2.php doesn't allow 32 as mask
- Applied in changeset pfsense:commit:cddc70a20177dd4d2d622f6dd8e9e08f181774c8.
-
08:36 AM
Bootstrap
Bug #5102 (Feedback): vpn_ipsec_phase2.php doesn't allow 32 as mask
- Javascript revised to accommodate VPN masks. See: http://chaos.pfmechanics.com/wiki/index.php/GUI_Bootstrap_conversio...
-
- It no longer has the theme name omitted, so now it's pointing to paths like: ...
-
09:13 AM
Bootstrap
Bug #4978 (Feedback): service restart and stop icon images broken
- Fixed by J Dillard
-
- In a config with many voucher rolls, attempting to expire a block of ~100 vouchers can fail on a specific roll.
Fo... -
- lost power on the host running those and they weren't set to auto-boot. Fixed that and booted them back up.
-
11:11 AM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- Can't find any of the test VMs you set up to demonstrate this :(
-
- thanks Kill Bill, et. al., I missed that.
-
03:53 AM Bug #5111: /usr/bin/dc is missing
- Chris Buechler wrote:
> not required by anything we ship. you can copy it over yourself if you're adding custom code... -
- thanks guys for being so reactive.
-
11:08 AM
Bootstrap
Bug #5070 (Closed): interfaces.php - Attempting to add a new gateway fails in several ways
- This issue is being closed because the interfaces.php page had not been converted at the time of opening and no javas...
-
11:07 AM
Bootstrap
Bug #4940 (Closed): interfaces.php DHCP config options missing on initial page load
- This issue is being closed because the interfaces.php page had not been converted at the time of opening and no javas...
-
11:07 AM
Bootstrap
Bug #4939 (Closed): initial load of interfaces.php doesn't show config
- This issue is being closed because the interfaces.php page had not been converted at the time of opening and no javas...
-
- No change in behavior from my previous test with the last commit in place.
-
09:40 AM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Applied in changeset pfsense:commit:87a5535632c2c1c0d34e6ac8e5a0f3ba97b58807.
-
09:31 AM
Bootstrap
Bug #5099 (Feedback): firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
-
- Looks good now. The single host and network options enable/disable the CIDR control as expected.
-
09:20 AM
Bootstrap
Bug #5015: proxy ARP/Other type network option not working
- Applied in changeset pfsense:commit:03b8c2844d8885d0a77bd91883f729c6ab6e7d88.
-
09:11 AM
Bootstrap
Bug #5015 (Feedback): proxy ARP/Other type network option not working
- Subnet mask now depends on type selector (single/network) only
This is not quite the way 2.2 works, but it makes m... -
- Got tired of this nonsense.
https://github.com/pfsense/pfsense/pull/1886/ - master
https://github.com/pfsense/pfs... -
01:09 AM Bug #3670: IPv6 DHCP-PD over PPPoE non functional + radvd core dump + solution
- Ermal Luçi wrote:
> Can you confirm that dhcpv6 is running on top of pppoe?
In my setup (see the update 11]) I ca... -
- I have a IPv6 configuration like the one described by Nic, but with a different ISP (Deutsche Telekom). My systems ru...
09/07/2015
-
06:20 PM Bug #5111: /usr/bin/dc is missing
- fixed in https://git.pfmechanics.com/pfsense/pfsense-tools/commit/572a9a8d17a1c70ef169def896f8ea170fcf8b1b
-
- Git blame says it was Renato in Dec 2013
https://github.com/pfsense/pfsense/commit/67e861292a48f6d94f8136699f8b74f... -
- https://github.com/pfsense/pfsense/blob/master/src/usr/local/bin/ping_hosts.sh#L113 uses /usr/bin/bc and bc is a dri...
-
- Well, it's unfortunately used in /usr/local/bin/ping_hosts.sh
-
- not required by anything we ship. you can copy it over yourself if you're adding custom code that needs it.
-
- /usr/bin/bc is missing:
bc: cannot find dc: No such file or directory
This is required by several scripts. -
- The issue can have been solved, i will monitor our gateways and update in a couple of days
//Ola -
- ...
-
- Noted that on the primary router we are running at 25-30% CPU without any load at all (less then 100Kbit/s throughput...
-
08:21 AM Feature #2358: NAT64 support
- UPVOTE
UPC Cablecom in Switzerland just became a "IPv6 only" ISP last month. (IPv6 Dual Stack Lite)
https://support... -
06:58 AM Feature #5112 (Resolved): LDAP support for Captive Portal
- The captive portal currently only supports the local user database or RADIUS.
RADIUS needs clear text passwords on... -
04:10 AM Bug #5044: PHP-FPM Segmentation fault after Configuration Import of 2.0.1-RELEASE config
- I can report that the bug is not present in pfSense-2.2.5-DEVELOPMENT-2g-i386-nanobsd-20150825-1210 I wonder what fix...
09/05/2015
-
05:11 AM Bug #5090: Wan failover fails to recover normal behaviour when all wans work again
- I too am seeing this problem on 2.2.4 embedded both variants (32-bit w/ALIX and 64-bit w/APU hardware) show the probl...
-
- Yeah, I won't be hardlinking lighttpd for every vhost, sorry; pgrep -anf is supposed to match this:...
-
03:58 AM pfSense Packages Bug #999: vhosts does not show up as started
- This is still an issue in the current release
-
- the "add voucher" button on services_captiveportal_vouchers.php is not working because $cpzone is null.
Should ha... -
- only the description/tips at the bottom was retained, missing title for fields showing what they are. see attached
-
- The way the fields are laid out for Authentication method needs some clean up. It wasn't the prettiest thing in world...
-
- services_captiveportal_zones.php has broken images, missing formatting.
-
- The + button on services_captiveportal_zones.php is a broken image.
09/04/2015
-
- fixed
-
02:40 PM
Bootstrap
Bug #5104: Firewall Optimization Options descriptions missing from system_advanced_firewall.php
- Applied in changeset pfsense:commit:c1de1944cd2a57500315e0783642c8cb1b67a192.
-
02:29 PM
Bootstrap
Bug #5104 (Feedback): Firewall Optimization Options descriptions missing from system_advanced_firewall.php
- Repaired automated help display which I broke when fixing an earlier control naming bug
-
- The descriptions for Firewall Optimization Options on system_advanced_firewall.php went away after #5020 (prior to th...
-
- 0 is fine now, but 32 has now gone missing. Now 0-31, should be 0-32.
-
02:00 PM
Bootstrap
Bug #5102: vpn_ipsec_phase2.php doesn't allow 32 as mask
- Applied in changeset pfsense:commit:5c2557832550b85a42a4ac500d4cf32e8b498a46.
-
01:54 PM
Bootstrap
Bug #5102 (Feedback): vpn_ipsec_phase2.php doesn't allow 32 as mask
- Provided new method addVPNMask() that creates a mask selector including '0'
-
- 0 is a needed option in the network mask fields on vpn_ipsec_phase2.php
-
- fixed
-
02:30 PM
Bootstrap
Bug #5103: vpn_ipsec.php missing global enable/disable
- Applied in changeset pfsense:commit:30fdf4400d3516e6400a6ac9a35e6116355cc9ea.
-
02:21 PM
Bootstrap
Bug #5103 (Feedback): vpn_ipsec.php missing global enable/disable
- Added back enable control
Tidied up the page display by adding a panel surrounding the tables -
- No longer a checkbox to enable/disable all IPsec on vpn_ipsec.php
-
- Hi. I also have the same behavior. After WAN1 gets up, traffic still goes through WAN2 unless I make some changes in ...
-
- Imagine wan1 (Tier 1) and wan2 (Tier 2) are working and you restart pfsense (just to show you my test proccess). Then...
-
- Looks good now, thanks!
-
02:35 PM
Bootstrap
Bug #5105 (Feedback): system_usermanager.php - SSH Authorized Key field hidden when it contains data
- Page updated as suggested by comments (in case we want to change back)
-
- By default the SSH authorized key data box is hidden with "[ ] Click to paste an authorized key" shown. If you check ...
-
- Looks good now, thanks!
-
02:38 PM
Bootstrap
Bug #5101 (Feedback): exec.php - Last line of shell execute output repeated
- Removed new line/space before closing </pre>
-
- Interesting. On 2.2.x it is using popen rather than either system or exec. Wonder why that was changed away from pope...
-
01:50 PM
Bootstrap
Bug #5101: exec.php - Last line of shell execute output repeated
- Applied in changeset pfsense:commit:6aef15f8cfa409d19e421bf2858667ca5de5026b.
-
01:39 PM
Bootstrap
Bug #5101 (Feedback): exec.php - Last line of shell execute output repeated
- system() replaced with exec().
system() emits the output to STDOUT, but that is trapped
by PHP when running syste... -
- Ooh, shiny and pretty. And it works, too. :-)
Thanks! -
01:07 PM
Bootstrap
Bug #5100 (Feedback): SMTP Test Notifications do not function
- Corrected input names (test_snmp => test-snmp. Same for growl.
Made buttons prettier -
- The destination ports are appearing now, but so are the source ports, which should remain hidden.
* New rule, defa... -
01:00 PM
Bootstrap
Bug #5099: firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Applied in changeset pfsense:commit:580f21515621feaf7c90bb8ae60e3f80eaf36086.
-
12:54 PM
Bootstrap
Bug #5099 (Feedback): firewall_rules_edit.php - Destination Port options are hidden on page load with TCP or UDP
- Corrected destination port group class
-
- Works fine now, thanks!
-
12:30 PM
Bootstrap
Bug #5098: system_certmanager.php - SAN Selection drop-down is not using proper values
- Applied in changeset pfsense:commit:3f0efd5896c3a57592e4d8f4125418c4cab700eb.
-
12:22 PM
Bootstrap
Bug #5098 (Feedback): system_certmanager.php - SAN Selection drop-down is not using proper values
- Page re-write to use jQuery for row add/delete
-
10:12 AM
Bootstrap
Bug #5098 (Assigned): system_certmanager.php - SAN Selection drop-down is not using proper values
- The correct select values are used, but they are not being stored properly because the programmer used the enableDupl...
-
- Works well now, thanks!
-
12:23 PM
Bootstrap
Bug #5097 (Feedback): system_certmanager.php - SAN formatting changes when input errors exist
- Fixed in #5098
-
- Re-tested each possible scenario here. Any time the versions differ, either older or newer, the sync stops as desired...
-
- I've tested this multiple times/ways since the code went in and couldn't manage to break it any longer. If anyone can...
-
-
- Sadly it appears as though browsers have decided they know better than page designers what forms need auto-fill. FF a...
-
08:52 AM
Bootstrap
Bug #5087 (Feedback): system_advanced_notifications.php - Multiple issues with fields on the page
- The only way I can think of to prevent autofill is to change the name of the field to something random~is, then chang...
-
- That sounds more like a bug with the IPsec auth permission code -- can you open that as a separate ticket rather than...
-
09:23 AM Feature #935: User manager RADIUS authentication method
- Jim P wrote:
> This works everywhere I've tried it, even on the bootstrap branch.
I can confirm that it works in ... -
- Looks nice, thanks!
-
09:20 AM
Bootstrap
Bug #5094: system_certmanager.php - "Name" colum values are all run together
- Applied in changeset pfsense:commit:5bb05274fdfcda08cd57bb60433e1ba75ab35900.
-
09:07 AM
Bootstrap
Bug #5094 (Feedback): system_certmanager.php - "Name" colum values are all run together
- Reformatted as requested
-
- Formatting looks good now, hit another issue though but I'll open a new ticket since it's not directly related to this.
-
09:40 AM
Bootstrap
Bug #5096: system_usermanager.php - IPsec PSK and "Click to paste an authorized key" for SSH Keys are on the same line
- Applied in changeset pfsense:commit:35e0cd707562a8c886310f70d7a5e824a53385cd.
-
09:34 AM
Bootstrap
Bug #5096 (Feedback): system_usermanager.php - IPsec PSK and "Click to paste an authorized key" for SSH Keys are on the same line
- Layout changed as requested
-
09:21 AM
Bootstrap
Bug #5096 (Assigned): system_usermanager.php - IPsec PSK and "Click to paste an authorized key" for SSH Keys are on the same line
-
- Works now, thanks!
-
09:16 AM
Bootstrap
Bug #5095 (Feedback): system_usermanager.php - Group membership for a user is non-functional
- jQuery script corrected
-
09:10 AM
Bootstrap
Bug #5095 (Assigned): system_usermanager.php - Group membership for a user is non-functional
- Fails to work when only one item in the "not member of" field. IT works if there are more.
-
- Looks much cleaner now, thanks!
-
09:00 AM
Bootstrap
Bug #5092: firewall_virtual_ip.php - Remove "CARP Settings" link/tab
- Applied in changeset pfsense:commit:1ed8d35ba375d187c2f8cbda16341fd2a74e949e.
-
08:55 AM
Bootstrap
Bug #5092 (Feedback): firewall_virtual_ip.php - Remove "CARP Settings" link/tab
-
08:54 AM
Bootstrap
Bug #5092: firewall_virtual_ip.php - Remove "CARP Settings" link/tab
- Removed as requested
-
- Works correctly now, thanks!
-
07:47 AM
Bootstrap
Bug #5088: system_authservers.php - When input validation errors occur, several field values are lost
- I had been testing by omitting the IP address and so causing an error. Unfortunately that takes a slightly different ...
-
07:40 AM
Bootstrap
Bug #5088 (Feedback): system_authservers.php - When input validation errors occur, several field values are lost
- Applied in changeset pfsense:commit:504bd882f87348b47f91d1b416f4ccc96e9b6677.
-
- https://github.com/pfsense/pfsense-packages/pull/1038
-
- Kill Bill wrote:
> https://github.com/pfsense/pfsense/blob/bootstrap/src/usr/local/www/interfaces.php#L1768
>
I... -
- https://github.com/pfsense/pfsense/blob/bootstrap/src/usr/local/www/interfaces.php#L1768
Overall, the whole proces... -
- this one really problematic on anything with queues defined. example: https://bootstrap-test1.pfmechanics.com
-
- remainder of issue here moved to #5104
-
- check out https://bootstrap-test1.pfmechanics.com/status_queues.php
Can browse around in another tab to the same b... -
- the bootstrap user manager table isn't sortable, so this is an issue, if it's something we care enough to do. If it's...
-
- fixed
-
- fixed
09/03/2015
-
- Our code doesn't set permissions on dhcpd.leases anywhere I see. I can't find any system that has it wrong, and a hug...
-
- that's by design, though the reason is no longer applicable. there's a feature request ticket open to allow it
-
- already exists. when using the built-in user manager, groups can be used to assign the permission. When using RADIUS,...
-
- yes this can go, fixed in 2.3 by removing PBI.
-
-
- So can we kill this?
pkg(ng) is coming to 2.3. -
- If this is target 2.3, then I'm assigning to Beaver, because the GUI code there is all Bootstrap
-
- reassigned. Renato, I think this might be in FreeBSD by now. If not, check with jporter.
-
- reassigned.
might wait until gnn gives the clear though. there are a few issues. -
- what does Status>Gateways show?
-
- No, new connections also keep using wan2. You can make a ping, wget or whatever you want, and only uses wan2.
-
- guessing this is just already-established connections staying on the other WAN? That's the expected behavior, only ne...
-
- It seems to me that wan failover is not working ok. Two wan connections configures with failover (tier 1 and tier 2)....
-
- When using exec.php to run a shell command, the last line of the output is repeated.
Example #1:
!http://i.imgur.... -
- Appears to work fine now. Entering and exiting maintenance mode adjusted the skew as expected, and the reset button c...
-
05:16 PM
Bootstrap
Bug #5093 (Feedback): carp_status.php - CARP VIPs are not displayed
- Page has been further updated to cause the maintenance mode to work. Please retest.
-
- OK it's much improved after the commit:9e4bb20, but two issues I can see now that it's this far:
* The "Enter Persis... -
- The VIPs are listed now but the behavior isn't right.
I have one VIP and it is actually in MASTER status, CARP is ... -
02:20 PM
Bootstrap
Bug #5093: carp_status.php - CARP VIPs are not displayed
- Applied in changeset pfsense:commit:d3a015710173a2ba0d0aca9f7b7fee13b3735b75.
-
02:15 PM
Bootstrap
Bug #5093 (Feedback): carp_status.php - CARP VIPs are not displayed
- THis page holds the distinction of being hte worst conversion of the project, by far. Not only was the formatting rub...
-
- Interesting note: The dashboard widget correctly displays the VIPs with their status, but not the status page
-
- On carp_status.php the CARP VIPs and status are not displayed. The Enable/Disable and Maintenance Mode buttons are th...
-
- The "CARP Settings" tab is gone now it just has one "tab" -- "Virtual IPs". Seems odd to just have one tab. Can that ...
-
01:20 PM
Bootstrap
Bug #5092: firewall_virtual_ip.php - Remove "CARP Settings" link/tab
- Applied in changeset pfsense:commit:59837fb151b188e525d453a0b2a5b81ed7331221.
-
01:14 PM
Bootstrap
Bug #5092 (Feedback): firewall_virtual_ip.php - Remove "CARP Settings" link/tab
- Tab zapped as requested
-
- yeah the intention there was to keep the existing tab since it's referenced in so many places all over the Internet. ...
-
- The HA Settings moved to *System > High Avail. Sync* several versions ago now, probably safe to nuke the "CARP Settin...
-
- Works!
-
01:20 PM
Bootstrap
Bug #5089: system_authservers.php - "Extended query" toggle flips
- Applied in changeset pfsense:commit:e39a41e91a0e700912ac3e1742a6b6ed47470a3a.
-
01:06 PM
Bootstrap
Bug #5089 (Feedback): system_authservers.php - "Extended query" toggle flips
- Replace toggle with jQuery
-
- Like happened on other pages, the behavior of "Extended query" show/hide flips when saved with a check.
-
- Behavior seems to be the same. Some fields like "Base DN" stay, but the ones mentioned in the original description di...
-
01:00 PM
Bootstrap
Bug #5088: system_authservers.php - When input validation errors occur, several field values are lost
- Applied in changeset pfsense:commit:7b4b0ad38eb0e3f00c7b1c8f9939a6c53d4d2df2.
-
12:55 PM
Bootstrap
Bug #5088 (Feedback): system_authservers.php - When input validation errors occur, several field values are lost
- Functionality was not present in 2.2. Added $pconfig = $_POST to restore form contents on validation failure
-
- When you save an auth server, LDAP for example, and an input validation problem happens, several fields are lost. Mig...
-
- Values save, test does nothing. No connection attempt is made. A notification filed manually with notify_via_smtp($ms...
-
- Whoops, forgot to reopen this -- #1 is still an issue. #2 is resolved.
-
- Fields save, though a test fails, probably something else in the backend. The config fields appear to be the same tho...
-
01:10 PM
Bootstrap
Bug #5087: system_advanced_notifications.php - Multiple issues with fields on the page
- Applied in changeset pfsense:commit:257a043bbd3fc1c027fe01fc4c3b8bf95b8215ea.
-
12:58 PM
Bootstrap
Bug #5087 (Feedback): system_advanced_notifications.php - Multiple issues with fields on the page
- My fault. Dropped the 's' in smtp :(
-
- Growl fields are OK. E-mail server still does not save.
-
12:30 PM
Bootstrap
Bug #5087: system_advanced_notifications.php - Multiple issues with fields on the page
- Applied in changeset pfsense:commit:4392e82299d6fbd28e468d431ed3578c6fcface9.
-
12:24 PM
Bootstrap
Bug #5087 (Feedback): system_advanced_notifications.php - Multiple issues with fields on the page
- Programmer had changed the input names such that they no longer matched the config system nasmes
-
- #1: The E-Mail auth username and password fields are filled in by the browser's auto-fill, which is insecure and anno...
-
- The real issue was tracked down and fixed in FreeBSD and pfSense. It will be included in the next release(s).
-
- Much better!
-
11:51 AM
Bootstrap
Bug #5086 (Feedback): system_advanced_notifications.php - Startup/Shutdown Sound grouped with e-mail options, should be separate
- Moved to its own section
-
- The "Startup/Shutdown Sound" option on System > Advanced, Notifications tab should be in its own section. Currently i...
-
- Works
-
11:48 AM
Bootstrap
Bug #5071 (Feedback): system_gateways.php - No "Add New Gateway" button
- Button was mis-labeled
-
- OK. In the 2.2.x the value was presented as plain text when editing, rather than any sort of entry control. That may ...
-
11:42 AM
Bootstrap
Bug #5069 (Closed): system_authservers.php - "Type" value cleared on save
- This is a bootstrap oddity. "<select>"s don't support the readonly attribute so you have to disable them. Disabling p...
-
- The save behavior is OK but there is a weird display issue with the "Type" drop-down, it still renders as a drop-down...
-
- Looks good now
-
- When creating a new rule, or editing an existing TCP or UDP rule, the destination ports are hidden even though the ru...
-
- Looks OK now, I can use port ranges when set to 'other' and the field is disabled when set to 'any' or another drop-d...
-
- Seems to all work now. I could add a tunable and it was properly applied in the OS, and then delete it.
-
- Looks good now, thanks!
-
11:35 AM
Bootstrap
Bug #5077 (Feedback): RRD and DHCP backup intervals not saved on system_advanced_misc.php
- My copy/paste error
-
- The value is saved but the value of RRD backup is being saved in both RRD and DHCP backup fields.
-
- Works
-
07:00 AM
Bootstrap
Bug #5084: 404 message for diag_logs_ipsec.php
- Applied in changeset pfsense:commit:08d333aec27510a72b2df34730e5f8e122cad006.
-
06:45 AM
Bootstrap
Bug #5084 (Feedback): 404 message for diag_logs_ipsec.php
- log page links updated
-
- Works
-
- Works
-
- Works correctly now, thanks!
-
- The SAN choices when creating a certificate need to use proper backend values to pass validation and work properly:
... -
- When adding a certificate, if SANs are present and an input validation error occurs, the formatting changes:
Durin... -
- Adding a cert without a SAN works fine now, though using SANs has separate issues, will open a ticket for that moment...
-
- When editing a user the IPsec Pre-Shared Key and "Click to paste an authorized key" for SSH Key options are all on on...
-
- The groups are listed on the page in separate controls but clicking "Move to 'Member Of' List >" does nothing.
!ht... -
- In the name column, the values should be stacked:
Cert Name
Cert Type (If stored)
CA/Server Indicators
Here i... -
- Associated user certs look OK now, found some other issues, will open separate tickets.
-
- Looks like it was adjusted again, has them each on one row with a label, looks much nicer now, IMO. Thanks!
-
- Works well now, fields are copied appropriately
-
- Looks good now, thanks!
-
- The CIDR drop-down works OK for Proxy ARP but it is still disabled for Other type VIPs in Network mode when it should...
-
- Saving CARP VIPs appears to work OK now.
-
10:43 AM Bug #5091 (Confirmed): In rule creation destination ports fields (from and to) are too small to read ports aliases names
- Refer to screenshot in attachement.
This could be solved by adding width tag in all.css files for all themes.
<... -
- Works correctly now, thanks!
-
- Seems to be OK now, thanks!
-
- This looks good now, but uncovered another issue on the page, opened that as #5088.
-
- Let me re-iterate the message: noone's fixing anything in 2.1.x.
-
06:17 AM Bug #3317: ntpd sets stratum 16 (unsynced) when selected to listen on multiple interfaces
- I use it because it has stable IPSEC. Racoon.
When my issues with strongswan disappear I'll switch. -
- 2.1.2 is something you should not use, let alone report bugs about it.
-
- What specific details do you need?
I'm having the same issue again. ... -
06:48 AM
Bootstrap
Bug #5085 (Confirmed): dashboard "progress bars" hard to read
- Suggested reading: https://github.com/twbs/bootstrap/issues/12848
09/02/2015
-
06:50 PM
Bootstrap
Bug #5084 (Confirmed): 404 message for diag_logs_ipsec.php
- Link should be changed from diag_logs_ipsec.php to diag_logs.php?logfile=ipsec
All of the diag_logs_*.php pages we... -
- I get a 404 message when I click the log button on vpn_ipsec.php and it takes me to diag_logs_ipsec.php.
-
- They could use a better font color.
!http://i.imgur.com/aMyLgRP.png! -
- fixed
-
- Fixed: pfsense:commit:99297d97496e9cc6260fc0c6e71ce2ebbbba8fa1
-
06:00 PM
Bootstrap
Bug #5079: system_advanced_sysctl.php doesn't work
- Applied in changeset pfsense:commit:95c3f3e928d20286c8c2c57c3160f6acd545a44f.
-
05:46 PM
Bootstrap
Bug #5079 (Feedback): system_advanced_sysctl.php doesn't work
- Programmer mixed up Submit/submit/Save/save
-
05:57 PM
Bootstrap
Bug #5082 (Feedback): system_authservers.php - Unable to fix failed "Descriptive Name" input validation rejection
- Name field may now be edited on $input_errors
-
- If you attempt to add a second authentication server entry with the name of one that already exists, the input valida...
-
-
02:42 PM pfSense Packages Bug #5081 (Resolved): LADVD failing on LAGG INTERFACE
- Maybe this is not related to pfsense but to the actual packege.
Im getting these errors when enabling lldp/cdp on ... -
05:40 PM
Bootstrap
Bug #5078: can't not choose an option for crypto hardware
- Applied in changeset pfsense:commit:99d17ff1be2aff863273c88da716a42875f4d75f.
-
05:34 PM
Bootstrap
Bug #5078 (Feedback): can't not choose an option for crypto hardware
- Added 'None' option to hardware array
-
04:50 PM
Bootstrap
Bug #5077: RRD and DHCP backup intervals not saved on system_advanced_misc.php
- Applied in changeset pfsense:commit:b49aac93b5a6f647d7f89a31721831389d96b717.
-
04:37 PM
Bootstrap
Bug #5077 (Feedback): RRD and DHCP backup intervals not saved on system_advanced_misc.php
- Programmer changed the name of these inputs, but only in some places :)
-
04:40 PM
Bootstrap
Bug #5076: proxypass on system_advanced_misc.php not saved
- Applied in changeset pfsense:commit:6fe240201da01d4cc6ceae82564b22efeb889d2e.
-
04:27 PM
Bootstrap
Bug #5076 (Feedback): proxypass on system_advanced_misc.php not saved
- Corrected element name 'password' => 'proxypass'
-
04:27 PM Feature #5083 (Duplicate): Allow bridge members to be hidden from menu
- I'd expect that in most cases a bridge is created so that the member interfaces don't have to be managed separately. ...
-
04:23 PM
Bootstrap
Bug #5073 (Feedback): firewall_virtual_ip_edit.php - "Virtual IP Password" enabled for all types, not just CARP
- Fixed by previous change
-
04:06 PM
Bootstrap
Bug #5069 (Feedback): system_authservers.php - "Type" value cleared on save
- Inputs should be readonly, not disabled when not required. Disabling prevents them from being submitted and breaks th...
-
- Same thing happens to the Descriptive Name field with LDAP... Save and the name and type both go blank. Probably sinc...
-
- Works correctly now, thanks!
-
03:48 PM
Bootstrap
Bug #5068 (Feedback): system_authservers.php - LDAP Container selection popup is non-functional
- Provided missing javascript functionality
-
- Works correctly now, thanks!
-
03:29 PM
Bootstrap
Bug #5067 (Feedback): system_authservers.php - LDAP default ports are not pre-filled
- Provided missing functionality in jQuery
-
- Works correctly now, thanks!
-
03:11 PM
Bootstrap
Bug #5066 (Feedback): system_authservers.php - Bind Anonymous/Bind Credentials checkbox show/hide gets reversed
- toggles suck. Replaced with explicit jQuery
-
- This specific issue (The detail descriptions) appears to be OK now. Other aspects may still need more testing but tha...
-
02:12 PM
Bootstrap
Bug #5064 (Feedback): Alias entry detail description does not save
- Page has been updated with the new row add/delete system and greatly simplified. I hope not over simplified. There ma...
-
02:57 PM
Bootstrap
Bug #5065 (Feedback): system_authservers.php - No LDAP server form fields are saved
- Framework method setDisable() seems to prevent the input element from being submitted, as well as disabling it.
Co... -
01:05 PM Feature #5080 (Resolved): Settings tab for global Kea DHCP server options
- Hello,
it would be nice, to have an global settings tab und Services / DHCP Server. On this tab i like to declare ... -
- what do your PPP logs show?
-
- it's gone, same as in 2.2.x, so this is fixed.
There is no reason to have it, the only thing it accomplished was ... -
10:42 AM
Bootstrap
Bug #5040: interfaces.php "copy my MAC" mis-feature reappeared
- When converting the page I found that the ARP lookup was returning multiple MACs concatenated together ebcause my IP ...
-
- Wait, is this fixed, or not?
If it's fixed, why are we taking it out?
-
10:20 AM
Bootstrap
Bug #5061: unable to specify port range on firewall_rules_edit.php
- Applied in changeset pfsense:commit:861cf07b4615edc5eba0469c0edf99912813e85b.
-
10:10 AM
Bootstrap
Bug #5061 (Feedback): unable to specify port range on firewall_rules_edit.php
- I had reversed 'Any' and '(Other)' in the port list :(
-
10:10 AM
Bootstrap
Bug #5057: diag_logs_settings.php show/hide fields issue
- Applied in changeset pfsense:commit:3605c41bd4abd3c95ed93895266d68d0daccb551.
-
09:56 AM
Bootstrap
Bug #5057 (Feedback): diag_logs_settings.php show/hide fields issue
- Toggles() converted to jQuery for control
-
09:52 AM Bug #4931: dhcpleases misses some DHCP lease changes
- Forgive my ignore but wouldn't these lines of code cover the situation where the file is moved?
if ((evlist.ffla... -
09:50 AM
Bootstrap
Bug #5028: issues adding/editing users - system_usermanager.php
- Applied in changeset pfsense:commit:98402844e6f80290b67aa2b5d5923435f334e5b6.
-
09:37 AM
Bootstrap
Bug #5028 (Feedback): issues adding/editing users - system_usermanager.php
- The 'delcert' action had been replaced with non-functional code at some time early in the Bootstrap project. Now rest...
-
02:54 AM pfSense Packages Bug #5063: OpenVPN Client Export Utility not accessable in WebGUI /w group permissions set
- If no bug, then please change to feature. I think it's very helpful for restricted local users not only to be able to...
09/01/2015
-
- fixed
-
11:20 AM
Bootstrap
Bug #4976 (Feedback): services_unbound_acls.php is broken
- A number of bugs were recorded against this page which features an editable list of networks. There are several other...
-
- fixed
-
03:20 PM
Bootstrap
Bug #5055: group "all" shouldn't appear as configurable
- Applied in changeset pfsense:commit:b4333696779e52885d282f650aad27395ba942c5.
-
03:06 PM
Bootstrap
Bug #5055 (Feedback): group "all" shouldn't appear as configurable
- "All" no longer appears in group lists
-
- fixed
-
03:10 PM
Bootstrap
Bug #5056 (Feedback): protocol changed to TCP upon editing rule
- Input value corrected
-
- much of that's fixed, I opened separate tickets on the outstanding issues
-
- can't add or or edit values, save button does nothing.
-
- system_advanced_misc.php, can't choose nothing (the default) for "Cryptographic Hardware"
-
- The RRD and DHCP backup interval values on system_advanced_misc.php aren't saved.
-
- the proxypass field on system_advanced_misc.php isn't saved
-
- fixed
-
05:08 PM
Bootstrap
Bug #5072 (Feedback): diag_confbak.php - Multiple copies of the config history and settings on the page
- Looks like the file got trashed. Saved version was committed and pushed.
-
- It looks like a rewrite of the page was started but not finished. There is a new style settings box at the top follow...
-
- closer, prompt for deletion shows up as added back now, but it doesn't actually delete the cert association
-
02:30 PM
Bootstrap
Bug #5028: issues adding/editing users - system_usermanager.php
- Applied in changeset pfsense:commit:db676e5b6fecd7d1bf305bbe0237ea69940e9a05.
-
02:18 PM
Bootstrap
Bug #5028 (Feedback): issues adding/editing users - system_usermanager.php
- Fixed cert table structure
Restored "Delete" functionality to cert table -
- Item 3 is still an issue. Check testuser on your test VM, Steve. Seems like it's adding something there, but it's not...
-
07:30 PM Todo #4847: NanoBSD Image Flash Block Misalignment
- Any chance 2.3 will bring a NanoBSD installer? It would be so much easier if alignment / fragment size could be chose...
-
- Fun Fact. This is the FACTORY format of a SanDisk microSDXC 64GB UHS-1 card I just got as a warranty replacement. The...
-
- rulesets that generate errors not including the line number on the first line of the resulting output don't file a no...
-
- reverted the re-addition and the commit prior to that which removed the file, to keep the history intact. fixed now
-
03:24 PM
Bootstrap
Bug #5060 (Feedback): firewall_virtual_ip_edit.php has gone missing
- File restored. No idea where it went or why
-
- Removed in this commit:
https://github.com/pfsense/pfsense/commit/ca5445db5457ec754debdaa84c37beeeaa49aa17
doesn... -
- (Sorry, for forum read "blog", but the same applies)
-
- The GUI indicates whether an upgrade is available, but doesn't provide a way to see the summary or detailed release n...
-
- This is related to #4978. We are converting old icon images to Bootstrap Glyphicons. In this case icon-remove-sign
-
- The delete icon for CRL members points to themes/pfsense/images/icons/icon_x.gif for its X image, which no longer exi...
-
05:11 PM
Bootstrap
Bug #5057: diag_logs_settings.php show/hide fields issue
- This is exactly the problem with using the toggle() method and why I am trying to eliminate it now that we are not a ...
-
- Same here... after saving with remote syslog enabled it behaves as described.
Quick recording of it flipping:
!ht... -
- The "Virtual IP Password" field on firewall_virtual_ip_edit.php should only be enabled for CARP type Virtual IP addre...
-
03:17 PM
Bootstrap
Bug #5058 (Feedback): error when creating cert with no SAN
- I believe this error results from a change outside of the bootstrap project. The code around line 270 was changed rec...
-
- If you create a certificate with no SAN (delete all the Alternate Name fields), you get: ...
-
- System > Routing, Gateways tab, there is no "Add New Gateway" button:
!http://i.imgur.com/HFh1QCn.jpg!
When a g... -
- When changing an interface to "Static IPv4", there is a button to "Add a New Gateway". On 2.2.x this was all dynamic/...
-
02:50 PM
Bootstrap
Bug #5047: system_authservers.php LDAP "Search Scope" fields are not formatted properly
- Applied in changeset pfsense:commit:905f61195954ef93a019d89ec4ffd8045ce2d253.
-
02:37 PM
Bootstrap
Bug #5047 (Feedback): system_authservers.php LDAP "Search Scope" fields are not formatted properly
- LDAP Search scope items now grouped horizontally again, but labels beneath each input show the function.
This is abou... -
- This works everywhere I've tried it, even on the bootstrap branch.
-
02:27 PM
Bootstrap
Bug #4969 (Feedback): Mobile IPsec shouldn't show "remote gateway" field
- Added conditional to input
Updated copyright
-
-
- Spoke too soon, if I leave it on the page it eventually shows "Could not connect to the LDAP server. Please check you...
-
- When creating an LDAP server the "Select a Container" button should open a pop-up window that queries the LDAP server...
-
- * Create a RADIUS server entry
* Save
* Edit the RADIUS server entry -- Name and Type are disabled since they canno... -
- The LDAP server port field should be pre-filled by default, and change automatically based on the Transport selector....
-
- Similar to #5057 -- On system_authservers.php if you edit an existing LDAP server entry, "Use anonymous binds to reso...
-
- Create an LDAP entry on system_authservers.php, enter some info, press save. The only thing retained is the name, no ...
-
- This doesn't seem to be true as far as I can tell. I created an account, assigned it only the privilege for the expor...
-
- It isn't possible to open the OpenVPN Client Export page via the WebGUI, if group permission is set to "WebCfg - Open...
-
12:30 PM
Bootstrap
Bug #5012: port forward port values missing from edit screen
- Applied in changeset pfsense:commit:8604fe09f72f8b162c1e402f2c901299e42f4d12.
-
12:22 PM
Bootstrap
Bug #5012 (Feedback): port forward port values missing from edit screen
- Corrected input value:
- $pconfig['localbeginport_cust'],
+ $pconfig['localbeginport'], -
12:25 PM
Bootstrap
Bug #5020 (Feedback): move firewall optimization and state tracking descriptions back to tips
-
12:25 PM
Bootstrap
Bug #5020: move firewall optimization and state tracking descriptions back to tips
- Would be helpful to have one ticket per page when possible. Can we resolve this one and make a new ticket for system_...
-
- the firewall_rules_edit.php part is good.
The system_advanced_firewall.php part doesn't seem to ever show the tip... -
12:01 PM
Bootstrap
Bug #5064 (Assigned): Alias entry detail description does not save
- Page needs same treatment as services_unbound_acls replacing hte enableDuplication() with new jQuery code.
-
- When editing an alias on firewall_aliases_edit.php there is a box for a per-entry description. Text put in this box i...
-
- Config emailed today.
-
- Sorry, I tried changing the default gateway and it doesn't work. I've also tried changing the monitor IP and that do...
-
01:51 AM Bug #5039: Multiple PPPoE WANs no longer connect simultaneously after upgrade to 2.2.4
- Not sure if this will help... because I use virtualPF instead of pfsense... and we have one PPPoe and one Ethernet in...
-
- This was redone in a5e2a35f03c8e176dd005faa9aad81c29a16a704 however it still doesn't verify that the input given is a...
-
- When you choose "(other)" from the drop down, the text box is disabled. When choosing "any", the text box is enabled ...
-
- Happy to code the auto-expansion of stuff like:
10.20.16.0/20
into
Alternative (1):
16.20.10.in-addr.arpa
17.20.... -
- fixed
-
- Yeah that's it. That's not very compatible cross-platform. Chrome on Linux and Windows (at a minimum) shows like the ...
-
- should be an advanced button like on firewall_rules_edit.php rather than a checkbox
-
- fixed
08/31/2015
-
- Browse to diag_logs_settings.php where you have syslog enabled.
Uncheck "Send log messages to remote syslog serve... -
- fixed
-
- this still isn't laid out clearly vs. how it was. Both those fields are for defining "Search scope", which is clear i...
-
- fixed
-
- fixed
-
- fixed
-
- fixed
-
- fixed
-
- fixed after my additional commit.
-
- Edit a rule with protocol set to anything other than TCP, and firewall_rules_edit.php will change it to TCP.
-
- fixed
-
- fixed
-
- fixed
-
- works
-
- reassign.
-
Time to bring in at least
https://wiki.strongswan.org/projects/strongswan/repository/revisions/f22c655b1102631f81d...-
- reassigned to renato
-
- reassign to Luiz
-
- assigned to Renato.
Post 2.3, we really need to take another look at strongswan, especially to move to vici rather... -
- assigned to Renato for tracking, but it looks like Phil might code it.
-
- fixed
-
- reassign
-
- that's why
pfsense-tools is gone.
assigned to luiz (if it's not already done) -
- why can't I assign this to Luiz?
-
- reassigned to Luiz. Maybe this is fixed in 10.2 (I'm looking mostly at MFS 286079 / r285999)
-
- fixed
-
- fixed
-
- this is good with one exception for the issue in #5055 but opened new ticket for that
-
- on system_usermanager.php, the "all" group, which is a group that contains every user and from which a user cannot be...
-
- fixed
-
- fixed
-
- reassigned to mgsmith.
-
- reassigned to cmb
-
- reassign to Renato. Maybe this is fixed in FreeBSD 10.2
-
- reassigned to cmb
-
- assigned to Chris, though we might get Renato to do the split.
-
- reassigned to Luiz
-
- I wrote upgrade_120_to_121() the other day. latest_config is now 12.1
I think this should be closed, but I'm goi... -
- If it would be helpful, I can probably get you guys a test "user" on our AWS so you can poke it. We only use AWS for...
-
- 70.60.165.x, I just submitted again.
When the password is incorrect (presumably similar error with a bad username?... -
- would need to know what IP you submitted it from (or at least the first couple octets) to identify the crash report.
-
- I have already submitted the error logs (multiple times) via the in-built mechanism, but I can re-create errors and g...
-
- Please share the appropriate PHP messages in PHP_errors.log - if something ends up generating invalid PHP then that s...
-
- This is somewhat related to Bug #3973.
I have a system where the "password" for the Route53 DynamicDNS handler kep... -
-
-
- Daniel Kempkens wrote:
> I can confirm that the same thing still happens on 2.2.4.
In what circumstance? Can you ... -
03:18 AM Bug #4113: multiple instances of /var/db/rrd/updaterrd.sh
- I can confirm that the same thing still happens on 2.2.4.
-
- Perhaps these places would help to actually get something *fixed*, as opposed to adding configuration options that ju...
-
11:48 AM pfSense Packages Feature #5052: Avahi Proxy Package: Add option to disable/control cache size.
- Hi There,
So to clarify things, I have IPv6 disabled on both avahi proxy systems and I am not talking about avahi ... -
- And BTW, what you described has nothing to do with "cache size" and everything to do with broken IPv6 privacy extensi...
-
- I have about zero clue what "cache size" are you talking about. Almost all *documented* config options are exposed in...
-
05:29 AM Bug #5053 (Duplicate): Apinger Problem with VPN interface
- Apinger does´t track VPN Tunnel on startup.
After reboot of pfsense the apinger.conf only shows the WAN IF
targ...
08/30/2015
-
- okay...never mind...looks like I did :)
-
- whoops...meant to submit this to packages.
doing that now. -
- Request: Set "cache-entries-max=0" in the avahi-daemon.conf file or be able to control it some way.
I have success...
08/29/2015
-
- When exactly are you getting a fatal error? I'm not getting any on clicking the + neither in tunnels, nor in certific...
08/28/2015
-
04:24 PM Bug #5051: Dynamic DNS URL for NO-IP should be updated
- I submitted a PR for this (PR #1839).
-
- I was digging into issue #3900 that is annoying me and discover that for NO-IP update work correcly the url needs to ...
-
03:30 PM
Bootstrap
Bug #5022: creating CA doesn't actually create the CA
- Applied in changeset pfsense:commit:683ba309d50913828decb5fe3f6ade059c1dfab2.
-
03:17 PM
Bootstrap
Bug #5022 (Feedback): creating CA doesn't actually create the CA
- return to calling page was commented out. Presumably for debug
-
- When pressing Save, the screen stays on "system_camanager.php?act=new" rather than returning to the CA list. The CA i...
-
03:18 PM
Bootstrap
Bug #4976: services_unbound_acls.php is broken
- Work in progress DO NOT TEST
-
03:14 PM
Bootstrap
Bug #4976 (Assigned): services_unbound_acls.php is broken
- Display issues resolved. Need to update the config logic to finish
-
- Looks good now, thanks!
-
02:20 PM
Bootstrap
Bug #4979: vpn_openvpn_client.php labeled as Server
- Applied in changeset pfsense:commit:20414bbc651686228a72aed2616b3f83f00284a4.
-
02:11 PM
Bootstrap
Bug #4979 (Feedback): vpn_openvpn_client.php labeled as Server
- Edited as requested
-
02:20 PM
Bootstrap
Bug #5047: system_authservers.php LDAP "Search Scope" fields are not formatted properly
- Applied in changeset pfsense:commit:df8fca9d1505f856512e23889fa11cddc31a8aaa.
-
02:07 PM
Bootstrap
Bug #5047 (Feedback): system_authservers.php LDAP "Search Scope" fields are not formatted properly
- Layout changed as requested
-
- On 2.2.x the LDAP Search Scope setting has two fields "Level" And "Base DN", on bootstrap these seem to have lost som...
-
- The pull request had issues with branches and merging and...
https://github.com/pfsense/pfsense/pull/1315
It seem... -
- This won't be fixed?
There's a pull request / commit,
https://github.com/pfsense/pfsense/commit/6c163f6a881c96f... -
02:11 PM Bug #5050 (Not a Bug): Openvpn cant save if another openvpn server uses same port on different IP
- Steps to reproduce:
Add secondary WAN IP (Alias)
Configure openvpn server on UDP/443 of Second IP
Attempt to con... -
01:56 PM
Bootstrap
Bug #5042 (Feedback): Reset RRD data on status_rrd_graph_settings.php is non-functional
- element names resetRRD changed to ResetRRD which is what the config logic expects.
-
01:50 PM
Bootstrap
Bug #5037: diag_logs_settings.php syslog issues
- Applied in changeset pfsense:commit:c478d7cf469bc7fc54cc88dc6b42e1697b035767.
-
01:38 PM
Bootstrap
Bug #5037 (Feedback): diag_logs_settings.php syslog issues
- Default option added
"Everything" checkbox provided
jQuery provided to disable all other boxes
"Toggle all" button re... -
01:13 PM
Bootstrap
Bug #5037: diag_logs_settings.php syslog issues
- There needs to be a checkbox called "Everything (logall) that is submitted as part of the form
-
12:47 PM
Bootstrap
Bug #5037 (Assigned): diag_logs_settings.php syslog issues
-
01:45 PM
Bootstrap
Bug #5040 (Feedback): interfaces.php "copy my MAC" mis-feature reappeared
- Darn. It was my first ever fixed m0n0wall bug :(
Removed as requested (but only with comments, just in case). -
12:50 PM
Bootstrap
Bug #5035: missing rule identification on diag_logs_filter.php
- Applied in changeset pfsense:commit:46ac92879086031a14a1e951aa9e0b2dd36e2eaf.
-
12:32 PM
Bootstrap
Bug #5035 (Feedback): missing rule identification on diag_logs_filter.php
- Restored javascript to enable pop-up matching rule
Added tool-tips to button -
12:06 PM
Bootstrap
Bug #5035 (Assigned): missing rule identification on diag_logs_filter.php
-
12:39 PM
Bootstrap
Bug #5036 (Feedback): missing easy rule and DNS icons on diag_logs_filter.php
- Think this may be browser related and your browser doesn't understand that glyph-icon.
Please confirm by trying Fire... -
- Yes, you will have made the edit in Diagnositcs->Edit file or applied it as a patch using the System Patches package ...
-
12:22 PM Bug #5046: dhcpd only checks arch 00:07 for UEFI network booting
- Does that file persist between reboots? (for my current system, before the patch is committed)
-
- Yeah, I've tested it and it works. What you have looks correct!
-
- The fix looks as easy as https://github.com/pfsense/pfsense/pull/1837
Can you confirm that adding those 2 lines to /... -
- Oops. In my description above I said "DNS Server" but I meant "DHCP Server".
-
- Inside the DNS Server configuration, you have the option to enable Network Booting and specify several options:
IP... -
- thanks
-
- Merged -> fixed.
-
-
- Merged, close please.
-
- Please recheck with current package version. Other than that, this needs to be done in FreeBSD port, not in pfSense.
-
12:10 PM
Bootstrap
Bug #5048: Membership display and table unacceptably horrible - system_groupmanager.php
- Applied in changeset pfsense:commit:2f1e91e49b70106c5129d5bf351956554d662a2f.
-
11:55 AM
Bootstrap
Bug #5048 (Feedback): Membership display and table unacceptably horrible - system_groupmanager.php
- Group membership section changes to dual multi-select layout
jQuery provided to move members to appropriate list -
10:42 AM
Bootstrap
Bug #5048 (Resolved): Membership display and table unacceptably horrible - system_groupmanager.php
- Should revert to double multi-selects with "move" buttons like load_banacer_pool_edit.php
-
12:03 PM
Bootstrap
Bug #5033 (Feedback): status_queues.php Not yet converted
- THis page has not been converted to bootstrap yet but it should be quick to do.
Could I get some help setting up t... -
11:57 AM
Bootstrap
Bug #5032 (Feedback): can't grant privileges to groups
- Fixed as part of #5048
-
10:40 AM
Bootstrap
Bug #5032 (Assigned): can't grant privileges to groups
- Programmer used POST to retrieve ID when should have been GET.
This page is also hosed in other way. Created new tic... -
- Adding a search capability to privilege selection would be a huge gain. Currently the list is extremely long and the ...
-
-
- Just so this doesn't go unshown (love byzanz):
Demo of how 2.2.x worked:
!http://i.imgur.com/rjYe5KI.gif!
And ... -
10:30 AM
Bootstrap
Bug #5030: system_authservers.php missing LDAP "Initial Template"
- Applied in changeset pfsense:commit:ac9d8bed4e863480c6c0c2ee3c05704acb2389ce.
-
10:22 AM
Bootstrap
Bug #5030 (Feedback): system_authservers.php missing LDAP "Initial Template"
- Corrected display logic
Added jQuery to auto-populate as required -
09:28 AM
Bootstrap
Bug #5030 (Assigned): system_authservers.php missing LDAP "Initial Template"
-
09:25 AM
Bootstrap
Bug #5030 (Feedback): system_authservers.php missing LDAP "Initial Template"
- Sorry but I don't understand this well enough to reproduce. Could you provide a step-by-step example that illustrates...
-
10:40 AM
Bootstrap
Bug #5031: system_authservers.php RADIUS field issues
- Applied in changeset pfsense:commit:df5d8616162842da5e8140cd4c38ce3fd6c13520.
-
10:29 AM
Bootstrap
Bug #5031 (Feedback): system_authservers.php RADIUS field issues
- Corrected display element names and values
-
09:12 AM
Bootstrap
Bug #5029 (Feedback): editing group doesn't select group membership
- Addressed in #5028
-
09:10 AM
Bootstrap
Bug #5028 (Feedback): issues adding/editing users - system_usermanager.php
- This page was supposed to have been converted, but much of hte functionality was skipped and the display choices were...
-
04:19 AM Bug #3876: pfsync is not synchronizing states on 2.2
- @Chris / @Ermal could you confirm which build you tested on, as I can't see this bug referenced in the release notes?
-
- RADIUS with no concurrent logins enabled is the answer here. The built-in voucher system isn't intended for that type...
-
- Clearly there are many use cases where limiting users to one device is undesired. Should be something bound to "Disab...
-
03:21 AM pfSense Packages Bug #4927: Add MAC only once to the pass-through list
- It is a feature not having multiple passthrumac entries?
-
- This does not belong under packages, plus a feature request, not a bug.
-
- There is no such issue in the current package code. Proof is in the pudding:
https://github.com/pfsense/pfsense-pa... -
- Apparently no bug here.
-
- What Phil noted is one of the things I was going to get to eventually. For now, more keeping it to things that are co...
-
- quoting from Phil Davis in #5027:
The old code checked if any of the advanced fields were set to non-default value...
08/27/2015
-
- The old code checked if any of the advanced fields were set to non-default values.
If all advanced fields are at the... -
12:30 PM
Bootstrap
Bug #5027: system_gateways_edit.php needs Advanced clean up
- Applied in changeset pfsense:commit:b18a5d894d549df3522427d11d64a00d72443328.
-
12:15 PM
Bootstrap
Bug #5027 (Feedback): system_gateways_edit.php needs Advanced clean up
- Added toggle action to advanced options section
-
- RFC2317 should deal just with cases of bit count >24 - tricks for delegating less than a /24 size piece of reverse lo...
-
- It's always ugly for anything other than /24, /16, and /8's. http://tools.ietf.org/html/rfc2317
Long story short t... -
- For your 192.168.0.0/24 case and other odd cases like 192.168.1.128/25 and... this pull request should fix it:
https... -
- Yeah it needs to actually calculate the network address, not try to find a 0.
-
07:33 AM Bug #5041: dhcpd.conf in-addr.arpa zones incorrect in some circumstances
- Looks like the bug is here in services.inc:
if (isset($dhcpifconf['ddnsupdate'])) {
$need_ddns_updates = true;
... -
- Oops, something went wrong with the formatting. The "+" signs shouldn't be there of course.
-
- I just noticed DNS pointer entries don't work for one of my pfSense installations.
It looks like the dhcpd.conf is... -
12:17 PM
Bootstrap
Bug #5028 (Assigned): issues adding/editing users - system_usermanager.php
-
12:00 PM
Bootstrap
Bug #5026: text issues on system_firmware.php
- Applied in changeset pfsense:commit:9b2bd81e62b8603cb9e8a0254f1d4670312e8975.
-
11:52 AM
Bootstrap
Bug #5026 (Feedback): text issues on system_firmware.php
- Corrected text issues.
-
12:00 PM
Bootstrap
Bug #5025: system_advanced_*.php don't work
- Applied in changeset pfsense:commit:1ce280abb36aeb6619f4aae41124d5ba608c7214.
-
11:50 AM
Bootstrap
Bug #5025 (Feedback): system_advanced_*.php don't work
- All element names on all advanced pages have been corrected to replace hte placeholders(?) with the proper config sys...
-
10:46 AM
Bootstrap
Bug #5025 (Assigned): system_advanced_*.php don't work
- All of the form elements were created with new (and incorrect) element names. e.g.: webgui-redirect instead of disabl...
-
- what you're describing works fine, as the log shows. target server probably not replying from the source IP used from...
-
-
06:51 AM pfSense Packages Bug #4717: Asterisk needs workarounds to work properly
- Update to 2.2.4 and the subsequent reinstallation of asterisk worked flawlessly without the shellcmd.
-
- this certainly isn't true in general, and not going to be possible to replicate given people have restored thousands ...
-
- Found a core dump file hiding in /var/log/ which might help towards people figuring out what was going on here.
-
- Just for clarity this seems to happen on boot (observed via serial console) and any attempt as restarting of it resul...
-
- After installing from a fresh 2.2.4 nanobsd serial image, getting a segmentation fault in PHP-FPM after importing a c...
-
10:42 AM
Bootstrap
Bug #5043 (Feedback): Country code drop-down on CA/Cert is using numeric value, not string
- Programmer had used incorrect array type, causing digit to be used as keys. Corrected and tested.
-
- The country code drop-down to select a country for CA or Certificate creation is using a numeric counter for the valu...
-
- Opened #5043 for that separate issue with the drop-down.
-
- Country code drop-down should be using the country code as the value, seems to be numeric now, so any of the 0-9 choi...
-
07:21 AM
Bootstrap
Bug #5022 (Feedback): creating CA doesn't actually create the CA
- Programmer had set form action to GET when logic uses POST.
Page now creates CAs although I sometimes see:
... -
08:50 AM
Bootstrap
Bug #5023: certificate creation not auto-filling CA's parameters
- Applied in changeset pfsense:commit:51583438a55c7f50681e80bcdd97de7860bde369.
-
08:35 AM
Bootstrap
Bug #5023 (Feedback): certificate creation not auto-filling CA's parameters
- Added jQuery to populate the cert details from the selected CA both on page load and on CA change.
-
07:25 AM
Bootstrap
Bug #5023 (Assigned): certificate creation not auto-filling CA's parameters
-
08:41 AM
Bootstrap
Bug #5024 (Feedback): system_crlmanager.php serial needs to allow 0
- "Serial" field min now set to '0' to avoid validation error.
-
08:36 AM
Bootstrap
Bug #5024 (Assigned): system_crlmanager.php serial needs to allow 0
-
- Status > RRD Graphs, Settings tab. Click "Reset RRD Data". No action is taken, old RRD files are still present.
-
- Applied in changeset commit:5563e8ba736bee091959ecafd0455b0dd48fcac5.
Also available in: Atom